commit 3a9ad0b4fdcd57f775d3615004c8c64c021a9e7d upstream.

David Ahern reported that d63e2e1f3df9 ("sparc/PCI: Clip bridge windows
to fit in upstream windows") fails to boot on sparc/T5-8:

  pci 0000:06:00.0: reg 0x184: can't handle BAR above 4GB (bus address 0x110204000)

The problem is that sparc64 assumed that dma_addr_t only needed to hold DMA
addresses, i.e., bus addresses returned via the DMA API (dma_map_single(),
etc.), while the PCI core assumed dma_addr_t could hold *any* bus address,
including raw BAR values.  On sparc64, all DMA addresses fit in 32 bits, so
dma_addr_t is a 32-bit type.  However, BAR values can be 64 bits wide, so
they don't fit in a dma_addr_t.  d63e2e1f3df9 added new checking that
tripped over this mismatch.

Add pci_bus_addr_t, which is wide enough to hold any PCI bus address,
including both raw BAR values and DMA addresses.  This will be 64 bits
on 64-bit platforms and on platforms with a 64-bit dma_addr_t.  Then
dma_addr_t only needs to be wide enough to hold addresses from the DMA API.

[bhelgaas: changelog, bugzilla, Kconfig to ensure pci_bus_addr_t is at
least as wide as dma_addr_t, documentation]
Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows")
Fixes: 23b13bc76f35 ("PCI: Fail safely if we can't handle BARs larger than 4GB")
Link: http://lkml.kernel.org/r/CAE9FiQU1gJY1LYrxs+ma5LCTEEe4xmtjRG0aXJ9K_Tsu+m9Wuw@mail.gmail.com
Link: http://lkml.kernel.org/r/1427857069-6789-1-git-send-email-yinghai@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=96231
Reported-by: David Ahern <david.ahern@oracle.com>
Tested-by: David Ahern <david.ahern@oracle.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea6055c46eda1e19e02209814955e13f334bbe1b upstream.

Since commit 39a6ac11df65 ("spi/pl022: Devicetree support w/o platform data")
the 'num-cs' parameter cannot be passed through platform data when probing
with devicetree. Instead, it's a required devicetree property.

Fix the binding documentation so the property is properly specified.

Fixes: 39a6ac11df65 ("spi/pl022: Devicetree support w/o platform data")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ]

The mvneta driver supports the Ethernet IP found in the Armada 370, XP,
380 and 385 SoCs. Since at least one more hardware feature is available
for the Armada XP SoCs then a way to identify them is needed.

This patch introduces a new compatible string "marvell,armada-xp-neta".

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull clk fixes from Michael Turquette:
 "Very late clk regression fixes for the ARM-based AT91 platform.

  These went unnoticed by me until recently, hence the late pull
  request"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: at91: fix h32mx prototype inclusion in pmc header
  clk: at91: trivial: typo in peripheral clock description
  clk: at91: fix PERIPHERAL_MAX_SHIFT definition
  clk: at91: pll: fix input range validity check

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

I copied the wrong shell code into the documentation. Sorry to all who
tried to get sense out of this current example :/ Slight rewording while
we are here.

Reported-by: Tim Bakker <bakkert@mymail.vcu.edu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

Pull networking fixes from David Miller:

 1) Fix uninitialized struct station_info in cfg80211_wireless_stats(),
    from Johannes Berg.

 2) Revert commit attempt to fix ipv6 protocol resubmission, it adds
    regressions.

 3) Endless loops can be created in bridge port lists, fix from Nikolay
    Aleksandrov.

 4) Don't WARN_ON() if sk->sk_forward_alloc is non-zero in
    sk_clear_memalloc, it is a legal situation during swap deactivation.
    Fix from Mel Gorman.

 5) Fix order of disabling interrupts and unlocking NAPI in enic driver
    to avoid a race.  From Govindarajulu Varadarajan.

 6) High and low register writes are swapped when programming the start
    of periodic output in igb driver.  From Richard Cochran.

 7) Fix device rename handling in mpls stack, from Robert Shearman.

 8) Do not trigger compaction synchronously when optimistically trying
    to allocate an order 3 page in alloc_skb_with_frags() and
    skb_page_frag_refill().  From Shaohua Li.

 9) Authentication with COOKIE_ECHO is not handled properly in SCTP, fix
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  Doc: networking: Fix URL for wiki.wireshark.org in udplite.txt
  sctp: allow authenticating DATA chunks that are bundled with COOKIE_ECHO
  net: don't wait for order-3 page allocation
  mpls: handle device renames for per-device sysctls
  net: igb: fix the start time for periodic output signals
  enic: fix memory leak in rq_clean
  enic: check return value for stat dump
  enic: unlock napi busy poll before unmasking intr
  net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
  bridge: fix multicast router rlist endless loop
  tipc: disconnect socket directly after probe failure
  Revert "ipv6: Fix protocol resubmission"
  cfg80211: wext: clear sinfo struct before calling driver

This patch fix URL (http to https) for wiki.wireshark.org.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull VT-d hardware workarounds from David Woodhouse:
 "This contains a workaround for hardware issues which I *thought* were
  never going to be seen on production hardware.  I'm glad I checked
  that before the 4.1 release...

  Firstly, PASID support is so broken on existing chips that we're just
  going to declare the old capability bit 28 as 'reserved' and change
  the VT-d spec to move PASID support to another bit.  So any existing
  hardware doesn't support SVM; it only sets that (now) meaningless bit
  28.

  That patch *wasn't* imperative for 4.1 because we don't have PASID
  support yet.  But *even* the extended context tables are broken — if
  you just enable the wider tables and use none of the new bits in them,
  which is precisely what 4.1 does, you find that translations don't
  work.  It's this problem which I thought was caught in time to be
  fixed before production, but wasn't.

  To avoid triggering this issue, we now *only* enable the extended
  context tables on hardware which also advertises "we have PASID
  support and we actually tested it this time" with the new PASID
  feature bit.

  In addition, I've added an 'intel_iommu=ecs_off' command line
  parameter to allow us to disable it manually if we need to"

* git://git.infradead.org/intel-iommu:
  iommu/vt-d: Only enable extended context tables if PASID is supported
  iommu/vt-d: Change PASID support to bit 40 of Extended Capability Register