litmus-rt.git/Documentation/hwmon/jc42, branch master

hwmon: (jc42) Add support for additional IDT temperature sensors

2015-03-09T16:59:35+00:00

TS3000GB0 has a new device ID (0x2913). Since IDT's datasheets suggest
that the upper 8 bit of the device ID reflect the chip ID and the lower
8 bit reflect the version number, modify the code to accept all chips
with ID 0x29xx.

Also add support for TS3001 and TSE2004.

Some of the datasheets for older chips are no longer available from
the IDT web site, so replace explicit links in the documentation with
a generic note.

Reviewed-by: Jean Delvare 
Signed-off-by: Guenter Roeck

hwmon: (jc42) Add support for STTS2004 and AT30TSE004

2014-05-21T23:02:25+00:00

Also fix links to datasheets for other supported sensors from
ST Microelectronics, and add links to several Atmel datasheets.

Signed-off-by: Guenter Roeck

hwmon: Update my e-mail address in driver documentation

2013-03-04T05:45:47+00:00

Most of the hwmon driver documentation still listed my old invalid e-mail
address. Fix it.

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare

hwmon: (jc42) Add support for MCP98244

2013-02-06T17:58:07+00:00

Signed-off-by: Guenter Roeck 
Reviewed-by: Jean Delvare

hwmon: (jc42) Remove unnecessary device IDs

2012-03-19T01:27:53+00:00

We don't really use or need separate device IDs for the various JC42.4 compliant
chips, so remove them and just stick with jc42.

Also update a datasheet references for SE98A, STTS424, and STTS424E02.

Signed-off-by: Guenter Roeck 
Acked-by: Jean Delvare

hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804

2012-03-07T17:48:44+00:00

Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck 
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare

hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000

2012-03-07T17:48:21+00:00

These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck

hwmon: (jc42) do not allow writing to locked registers

2011-02-16T16:18:33+00:00

On systems where the temperature sensor is actually used, the BIOS is
likely to have locked the alarm registers.  In that case, all writes
through the corresponding sysfs files would be silently ignored.

To prevent this, detect the locks and make the affected sysfs files
read-only.

Signed-off-by: Clemens Ladisch 
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck

hwmon: (jc42) more helpful documentation

2011-02-16T16:18:32+00:00

The documentation lists standard numbers and chip names in excruciating
detail, but that's all it does.  To help mere mortals in deciding
whether to enable this driver, mention what this sensor is for and in
which systems it might be found.

Also add a link to the actual JC 42.4 specification.

Signed-off-by: Clemens Ladisch 
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck

hwmon: add support for JEDEC JC 42.4 compliant temperature sensors

2010-08-10T03:45:10+00:00

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Guenter Roeck 
Cc: Jean Delvare 
Cc: Randy Dunlap 
Cc: Hans de Goede 
Cc: Mark Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds