litmus-rt.git/Documentation/devicetree/bindings/input/touchscreen, branch master The LITMUS^RT kernel. ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 2015-05-29T20:19:02+00:00 Pavel Machek pavel@ucw.cz 2015-05-29T19:32:11+00:00 8770d0898af7f0f0a8e88ce702b02a9ca326254f Fix dts to match what the Linux kernel expects. This works around touchscreen problems in 4.1 linux on Nokia n900. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> 
Fix dts to match what the Linux kernel expects. This works around
touchscreen problems in 4.1 linux on Nokia n900.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Input: add support for ChipOne icn8318 based touchscreens 2015-03-24T18:27:52+00:00 Hans de Goede hdegoede@redhat.com 2015-03-22T03:40:45+00:00 a93ad65d375f216025902a73ff25900d82a9de25 The ChipOne icn8318 is an i2c capacitive touchscreen controller typically used in cheap android tablets, this commit adds a driver for it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
The ChipOne icn8318 is an i2c capacitive touchscreen controller typically
used in cheap android tablets, this commit adds a driver for it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: touchscreen DT binding - add touchscreen-swapped-x-y property 2015-03-24T18:27:31+00:00 Hans de Goede hdegoede@redhat.com 2015-03-22T03:39:19+00:00 d16a33bb94f88a40a99418993849c1eb93d60de3 On devices with a native portrait screen a landscape touchscreen / digitizer may be used, this happens e.g. on ebook readers. In this case the X and Y axis of the touchscreen are swapped compared to the screen. Add a touchscreen-swapped-x-y property which drivers can use to see if they need to swap the axis to make the touchscreen coordinates match the screen coordinates. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
On devices with a native portrait screen a landscape touchscreen /
digitizer may be used, this happens e.g. on ebook readers. In this case the
X and Y axis of the touchscreen are swapped compared to the screen.

Add a touchscreen-swapped-x-y property which drivers can use to see if they
need to swap the axis to make the touchscreen coordinates match the screen
coordinates.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add Broadcom iProc touchscreen driver 2015-03-23T18:04:48+00:00 Jonathan Richardson jonathar@broadcom.com 2015-03-22T04:04:59+00:00 d5ae685f15307c85c6267c5a2be9ba3d70eb3297 Add initial version of the Broadcom touchscreen driver. Reviewed-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Tested-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Add initial version of the Broadcom touchscreen driver.

Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
Tested-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sun4i-ts - allow controlling filter and sensitivity via DT 2015-03-23T16:11:11+00:00 Jens Thiele karme@karme.de 2015-03-23T16:04:56+00:00 4ed0e032c3cf27c6fabc154164d003c4e0ac4654 This commit introduces two new optional device-tree properties: "tp-sensitive-adjust": adjust sensitivity of pen down detection "filter-type": select median and averaging filter The previous fixed defaults, didn't work well for the Olimex A13-LCD10TS (I have). Signed-off-by: Jens Thiele <karme@karme.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This commit introduces two new optional device-tree properties:
"tp-sensitive-adjust": adjust sensitivity of pen down detection
"filter-type": select median and averaging filter

The previous fixed defaults, didn't work well for the Olimex
A13-LCD10TS (I have).

Signed-off-by: Jens Thiele <karme@karme.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sun4i-ts - A10 (sun4i) has a different temperature curve 2015-03-08T21:16:59+00:00 Hans de Goede hdegoede@redhat.com 2015-03-08T21:12:41+00:00 91c68a7c1d92b48287f2f3111a9b09b26a263d3f Testing has revealed that the temperature in the rtp controller of the A10 (sun4i) SoC has a different curve then on the A13 (sun5i) and later models. Add a new sun5i-a13-ts compatible to differentiate the newer models and set the curve based on the compatible string. The new curve is still not ideal on all A10-s, that seems to have to do with there being a large spread between different A10-s out there, the new curve us based on callibration results on 4 completely different models: raw min raw max temp min temp max stepsize offset Tong Zhang's hackberry 2402 2680 45.0 80.0 0.125 -255.3 Hansg's Cubieboard 2207 2300 36.0 45.0 0.096 -175.8 Olliver's lime 1 (*): 2258 2537 48.3 87.1 0.139 -265.7 Olliver's lime 2 (*): 2222 2486 46.7 91.7 0.170 -331.0 *) from: http://linux-sunxi.org/Temperature_Calibration Average all 4: 0.133 -257.0 Average without outliers (middle 2): 0.132 -261.0 Since it is better to slightly overreport the temperature this patch uses the average of all 4 as curve. This fixes the temperature reported on the A10 being much higher then expected. Reported-by: Tong Zhang <lovewilliam@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Testing has revealed that the temperature in the rtp controller of the A10
(sun4i) SoC has a different curve then on the A13 (sun5i) and later models.

Add a new sun5i-a13-ts compatible to differentiate the newer models and
set the curve based on the compatible string.

The new curve is still not ideal on all A10-s, that seems to have to
do with there being a large spread between different A10-s out there,
the new curve us based on callibration results on 4 completely different
models:
                        raw min raw max temp min temp max stepsize offset
Tong Zhang's hackberry    2402    2680    45.0     80.0    0.125   -255.3
Hansg's Cubieboard        2207    2300    36.0     45.0    0.096   -175.8
Olliver's lime 1 (*):     2258    2537    48.3     87.1    0.139   -265.7
Olliver's lime 2 (*):     2222    2486    46.7     91.7    0.170   -331.0
*) from: http://linux-sunxi.org/Temperature_Calibration

Average all 4:                                             0.133   -257.0
Average without outliers (middle 2):                       0.132   -261.0

Since it is better to slightly overreport the temperature this patch uses
the average of all 4 as curve.

This fixes the temperature reported on the A10 being much higher then
expected.

Reported-by: Tong Zhang <lovewilliam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: add support for Semtech SX8654 I2C touchscreen controller 2015-03-07T01:18:17+00:00 Sébastien Szymanski sebastien.szymanski@armadeus.com 2015-03-07T00:49:38+00:00 902cb3afab8d4c924376de51ec5c02d171992914 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: goodix - add device tree support 2015-03-07T01:18:17+00:00 Aleksei Mamlin mamlinav@gmail.com 2015-03-07T00:43:38+00:00 771d8f1b178e7e09fcc641fccd48852958dbc329 This change adds device tree support and binding information for Goodix GT9xx series touchscreen controller. It also adds support for 5-finger chips, like GT911 and GT912, which can be found on ARM tablets, such as Wexler TAB7200 and MSI Primo73. Datasheets can be found here: https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This change adds device tree support and binding information for Goodix
GT9xx series touchscreen controller.  It also adds support for 5-finger
chips, like GT911 and GT912, which can be found on ARM tablets, such as
Wexler TAB7200 and MSI Primo73.

Datasheets can be found here:
https://drive.google.com/folderview?id=0BxCVOQS3ZymGfmJyY2RKbE5XbVlKNlktVTlwV0lxNEdxd2dzeWZER094cmJPVnMxN1F0Yzg&usp=sharing

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: ti_am335x_tsc - read charge delay from DT 2015-02-03T19:50:38+00:00 Vignesh R vigneshr@ti.com 2015-02-03T19:45:34+00:00 bf223612a4cd65d5eb15d6adc8422c7d61ae75dd This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0x400(CHARGEDLY_OPENDLY) is used. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
This patch reads charge delay from tsc DT node and writes to
REG_CHARGEDELAY register. If the charge delay is not specified in DT then
default value of 0x400(CHARGEDLY_OPENDLY) is used.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Input: sun4i-ts - add support for touchpanel controller on A31 2015-01-27T07:58:56+00:00 Chen-Yu Tsai wens@csie.org 2015-01-27T07:57:00+00:00 43c0e2234021d7f838a24821e622589ee730e020 The Allwinner A31 SoC (sun6i) has the same resistive touchpanel controller as on other sunxi platforms. The only difference between the variants is the control bits for enabling operations are left-shifted by 1 on the A31. Also update the comment for the original temperature sensor with information from Allwinner. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
The Allwinner A31 SoC (sun6i) has the same resistive touchpanel controller
as on other sunxi platforms. The only difference between the variants is
the control bits for enabling operations are left-shifted by 1 on the A31.

Also update the comment for the original temperature sensor with
information from Allwinner.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>