From 9e3cb29497561c846d0e7efc445731764d93c749 Mon Sep 17 00:00:00 2001 From: Victor Gallardo Date: Wed, 1 Oct 2008 23:37:57 -0700 Subject: ibm_newemac: Add support for GPCS, SGMII and M88E1112 PHY Add support for the phy types found on the Arches and other PowerPC 460 based boards. Signed-off-by: Victor Gallardo Acked-by: Benjamin Herrenschmidt Acked-by: Jeff Garzik Signed-off-by: Josh Boyer --- drivers/net/ibm_newemac/core.c | 58 +++++++++++++++++++++++++++++++++++------- 1 file changed, 49 insertions(+), 9 deletions(-) (limited to 'drivers/net/ibm_newemac/core.c') diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 4e633870e6e..efcf21c9f5c 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -130,6 +130,7 @@ static inline void emac_report_timeout_error(struct emac_instance *dev, const char *error) { if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX | + EMAC_FTR_460EX_PHY_CLK_FIX | EMAC_FTR_440EP_PHY_CLK_FIX)) DBG(dev, "%s" NL, error); else if (net_ratelimit()) @@ -201,13 +202,15 @@ static inline int emac_phy_supports_gige(int phy_mode) { return phy_mode == PHY_MODE_GMII || phy_mode == PHY_MODE_RGMII || + phy_mode == PHY_MODE_SGMII || phy_mode == PHY_MODE_TBI || phy_mode == PHY_MODE_RTBI; } static inline int emac_phy_gpcs(int phy_mode) { - return phy_mode == PHY_MODE_TBI || + return phy_mode == PHY_MODE_SGMII || + phy_mode == PHY_MODE_TBI || phy_mode == PHY_MODE_RTBI; } @@ -351,10 +354,24 @@ static int emac_reset(struct emac_instance *dev) emac_tx_disable(dev); } +#ifdef CONFIG_PPC_DCR_NATIVE + /* Enable internal clock source */ + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) + dcri_clrset(SDR0, SDR0_ETH_CFG, + 0, SDR0_ETH_CFG_ECS << dev->cell_index); +#endif + out_be32(&p->mr0, EMAC_MR0_SRST); while ((in_be32(&p->mr0) & EMAC_MR0_SRST) && n) --n; +#ifdef CONFIG_PPC_DCR_NATIVE + /* Enable external clock source */ + if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) + dcri_clrset(SDR0, SDR0_ETH_CFG, + SDR0_ETH_CFG_ECS << dev->cell_index, 0); +#endif + if (n) { dev->reset_failed = 0; return 0; @@ -547,8 +564,9 @@ static int emac_configure(struct emac_instance *dev) switch (dev->phy.speed) { case SPEED_1000: if (emac_phy_gpcs(dev->phy.mode)) { - mr1 |= EMAC_MR1_MF_1000GPCS | - EMAC_MR1_MF_IPPA(dev->phy.address); + mr1 |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_MF_IPPA( + (dev->phy.gpcs_address != 0xffffffff) ? + dev->phy.gpcs_address : dev->phy.address); /* Put some arbitrary OUI, Manuf & Rev IDs so we can * identify this GPCS PHY later. @@ -660,8 +678,12 @@ static int emac_configure(struct emac_instance *dev) out_be32(&p->iser, r); /* We need to take GPCS PHY out of isolate mode after EMAC reset */ - if (emac_phy_gpcs(dev->phy.mode)) - emac_mii_reset_phy(&dev->phy); + if (emac_phy_gpcs(dev->phy.mode)) { + if (dev->phy.gpcs_address != 0xffffffff) + emac_mii_reset_gpcs(&dev->phy); + else + emac_mii_reset_phy(&dev->phy); + } return 0; } @@ -866,7 +888,9 @@ static int emac_mdio_read(struct net_device *ndev, int id, int reg) struct emac_instance *dev = netdev_priv(ndev); int res; - res = __emac_mdio_read(dev->mdio_instance ? dev->mdio_instance : dev, + res = __emac_mdio_read((dev->mdio_instance && + dev->phy.gpcs_address != id) ? + dev->mdio_instance : dev, (u8) id, (u8) reg); return res; } @@ -875,7 +899,9 @@ static void emac_mdio_write(struct net_device *ndev, int id, int reg, int val) { struct emac_instance *dev = netdev_priv(ndev); - __emac_mdio_write(dev->mdio_instance ? dev->mdio_instance : dev, + __emac_mdio_write((dev->mdio_instance && + dev->phy.gpcs_address != id) ? + dev->mdio_instance : dev, (u8) id, (u8) reg, (u16) val); } @@ -2367,7 +2393,11 @@ static int __devinit emac_init_phy(struct emac_instance *dev) * XXX I probably should move these settings to the dev tree */ dev->phy.address = -1; - dev->phy.features = SUPPORTED_100baseT_Full | SUPPORTED_MII; + dev->phy.features = SUPPORTED_MII; + if (emac_phy_supports_gige(dev->phy_mode)) + dev->phy.features |= SUPPORTED_1000baseT_Full; + else + dev->phy.features |= SUPPORTED_100baseT_Full; dev->phy.pause = 1; return 0; @@ -2406,7 +2436,9 @@ static int __devinit emac_init_phy(struct emac_instance *dev) * Note that the busy_phy_map is currently global * while it should probably be per-ASIC... */ - dev->phy.address = dev->cell_index; + dev->phy.gpcs_address = dev->gpcs_address; + if (dev->phy.gpcs_address == 0xffffffff) + dev->phy.address = dev->cell_index; } emac_configure(dev); @@ -2516,6 +2548,8 @@ static int __devinit emac_init_config(struct emac_instance *dev) dev->phy_address = 0xffffffff; if (emac_read_uint_prop(np, "phy-map", &dev->phy_map, 0)) dev->phy_map = 0xffffffff; + if (emac_read_uint_prop(np, "gpcs-address", &dev->gpcs_address, 0)) + dev->gpcs_address = 0xffffffff; if (emac_read_uint_prop(np->parent, "clock-frequency", &dev->opb_bus_freq, 1)) return -ENXIO; if (emac_read_uint_prop(np, "tah-device", &dev->tah_ph, 0)) @@ -2559,6 +2593,9 @@ static int __devinit emac_init_config(struct emac_instance *dev) /* Check EMAC version */ if (of_device_is_compatible(np, "ibm,emac4sync")) { dev->features |= (EMAC_FTR_EMAC4 | EMAC_FTR_EMAC4SYNC); + if (of_device_is_compatible(np, "ibm,emac-460ex") || + of_device_is_compatible(np, "ibm,emac-460gt")) + dev->features |= EMAC_FTR_460EX_PHY_CLK_FIX; } else if (of_device_is_compatible(np, "ibm,emac4")) { dev->features |= EMAC_FTR_EMAC4; if (of_device_is_compatible(np, "ibm,emac-440gx")) @@ -2826,6 +2863,9 @@ static int __devinit emac_probe(struct of_device *ofdev, ndev->dev_addr[0], ndev->dev_addr[1], ndev->dev_addr[2], ndev->dev_addr[3], ndev->dev_addr[4], ndev->dev_addr[5]); + if (dev->phy_mode == PHY_MODE_SGMII) + printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name); + if (dev->phy.address >= 0) printk("%s: found %s PHY (0x%02x)\n", ndev->name, dev->phy.def->name, dev->phy.address); -- cgit v1.2.2