From 24c4a3b29255f9f8bc48d93597a58256b5a1f83f Mon Sep 17 00:00:00 2001 From: Pavel Cheblakov Date: Mon, 1 Feb 2010 09:42:44 +0000 Subject: can: add support for CAN interface cards based on the PLX90xx PCI bridge This driver is for CAN interface cards based on the PLX90xx PCI bridge. Driver supports now: - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) - Adlink PCI-7841/cPCI-7841 SE card - Marathon CAN-bus-PCI card (http://www.marathon.ru/) - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) Changes since v1: - Added some defines for static inline int plx_pci_check_sja1000(...) - static struct pci_device_id plx_pci_tbl[] replaced by static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) - Typo fixed Signed-off-by: Pavel Cheblakov Acked-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/sja1000/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net/can/sja1000/Kconfig') diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig index 4c674927f24..9e277d64a31 100644 --- a/drivers/net/can/sja1000/Kconfig +++ b/drivers/net/can/sja1000/Kconfig @@ -44,4 +44,16 @@ config CAN_KVASER_PCI This driver is for the the PCIcanx and PCIcan cards (1, 2 or 4 channel) from Kvaser (http://www.kvaser.com). +config CAN_PLX_PCI + tristate "PLX90xx PCI-bridge based Cards" + depends on PCI + ---help--- + This driver is for CAN interface cards based on + the PLX90xx PCI bridge. + Driver supports now: + - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/) + - Adlink PCI-7841/cPCI-7841 SE card + - Marathon CAN-bus-PCI card (http://www.marathon.ru/) + - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/) + endif -- cgit v1.2.2