From fcc9d2e5a6c89d22b8b773a64fb4ad21ac318446 Mon Sep 17 00:00:00 2001
From: Jonathan Herman <hermanjl@cs.unc.edu>
Date: Tue, 22 Jan 2013 10:38:37 -0500
Subject: Added missing tegra files.

---
 drivers/media/video/c-qcam.c | 891 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 891 insertions(+)
 create mode 100644 drivers/media/video/c-qcam.c

(limited to 'drivers/media/video/c-qcam.c')

diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
new file mode 100644
index 00000000000..cd8ff047318
--- /dev/null
+++ b/drivers/media/video/c-qcam.c
@@ -0,0 +1,891 @@
+/*
+ *	Video4Linux Colour QuickCam driver
+ *	Copyright 1997-2000 Philip Blundell <philb@gnu.org>
+ *
+ *    Module parameters:
+ *
+ *	parport=auto      -- probe all parports (default)
+ *	parport=0         -- parport0 becomes qcam1
+ *	parport=2,0,1     -- parports 2,0,1 are tried in that order
+ *
+ *	probe=0		  -- do no probing, assume camera is present
+ *	probe=1		  -- use IEEE-1284 autoprobe data only (default)
+ *	probe=2		  -- probe aggressively for cameras
+ *
+ *	force_rgb=1       -- force data format to RGB (default is BGR)
+ *
+ * The parport parameter controls which parports will be scanned.
+ * Scanning all parports causes some printers to print a garbage page.
+ *       -- March 14, 1999  Billy Donahue <billy@escape.com>
+ *
+ * Fixed data format to BGR, added force_rgb parameter. Added missing
+ * parport_unregister_driver() on module removal.
+ *       -- May 28, 2000  Claudio Matsuoka <claudio@conectiva.com>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/parport.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/jiffies.h>
+#include <linux/videodev2.h>
+#include <asm/uaccess.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+
+struct qcam {
+	struct v4l2_device v4l2_dev;
+	struct video_device vdev;
+	struct pardevice *pdev;
+	struct parport *pport;
+	int width, height;
+	int ccd_width, ccd_height;
+	int mode;
+	int contrast, brightness, whitebal;
+	int top, left;
+	unsigned int bidirectional;
+	struct mutex lock;
+};
+
+/* cameras maximum */
+#define MAX_CAMS 4
+
+/* The three possible QuickCam modes */
+#define QC_MILLIONS	0x18
+#define QC_BILLIONS	0x10
+#define QC_THOUSANDS	0x08	/* with VIDEC compression (not supported) */
+
+/* The three possible decimations */
+#define QC_DECIMATION_1		0
+#define QC_DECIMATION_2		2
+#define QC_DECIMATION_4		4
+
+#define BANNER "Colour QuickCam for Video4Linux v0.06"
+
+static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
+static int probe = 2;
+static int force_rgb;
+static int video_nr = -1;
+
+/* FIXME: parport=auto would never have worked, surely? --RR */
+MODULE_PARM_DESC(parport, "parport=<auto|n[,n]...> for port detection method\n"
+			  "probe=<0|1|2> for camera detection method\n"
+			  "force_rgb=<0|1> for RGB data format (default BGR)");
+module_param_array(parport, int, NULL, 0);
+module_param(probe, int, 0);
+module_param(force_rgb, bool, 0);
+module_param(video_nr, int, 0);
+
+static struct qcam *qcams[MAX_CAMS];
+static unsigned int num_cams;
+
+static inline void qcam_set_ack(struct qcam *qcam, unsigned int i)
+{
+	/* note: the QC specs refer to the PCAck pin by voltage, not
+	   software level.  PC ports have builtin inverters. */
+	parport_frob_control(qcam->pport, 8, i ? 8 : 0);
+}
+
+static inline unsigned int qcam_ready1(struct qcam *qcam)
+{
+	return (parport_read_status(qcam->pport) & 0x8) ? 1 : 0;
+}
+
+static inline unsigned int qcam_ready2(struct qcam *qcam)
+{
+	return (parport_read_data(qcam->pport) & 0x1) ? 1 : 0;
+}
+
+static unsigned int qcam_await_ready1(struct qcam *qcam, int value)
+{
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
+	unsigned long oldjiffies = jiffies;
+	unsigned int i;
+
+	for (oldjiffies = jiffies;
+	     time_before(jiffies, oldjiffies + msecs_to_jiffies(40));)
+		if (qcam_ready1(qcam) == value)
+			return 0;
+
+	/* If the camera didn't respond within 1/25 second, poll slowly
+	   for a while. */
+	for (i = 0; i < 50; i++) {
+		if (qcam_ready1(qcam) == value)
+			return 0;
+		msleep_interruptible(100);
+	}
+
+	/* Probably somebody pulled the plug out.  Not much we can do. */
+	v4l2_err(v4l2_dev, "ready1 timeout (%d) %x %x\n", value,
+	       parport_read_status(qcam->pport),
+	       parport_read_control(qcam->pport));
+	return 1;
+}
+
+static unsigned int qcam_await_ready2(struct qcam *qcam, int value)
+{
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
+	unsigned long oldjiffies = jiffies;
+	unsigned int i;
+
+	for (oldjiffies = jiffies;
+	     time_before(jiffies, oldjiffies + msecs_to_jiffies(40));)
+		if (qcam_ready2(qcam) == value)
+			return 0;
+
+	/* If the camera didn't respond within 1/25 second, poll slowly
+	   for a while. */
+	for (i = 0; i < 50; i++) {
+		if (qcam_ready2(qcam) == value)
+			return 0;
+		msleep_interruptible(100);
+	}
+
+	/* Probably somebody pulled the plug out.  Not much we can do. */
+	v4l2_err(v4l2_dev, "ready2 timeout (%d) %x %x %x\n", value,
+	       parport_read_status(qcam->pport),
+	       parport_read_control(qcam->pport),
+	       parport_read_data(qcam->pport));
+	return 1;
+}
+
+static int qcam_read_data(struct qcam *qcam)
+{
+	unsigned int idata;
+
+	qcam_set_ack(qcam, 0);
+	if (qcam_await_ready1(qcam, 1))
+		return -1;
+	idata = parport_read_status(qcam->pport) & 0xf0;
+	qcam_set_ack(qcam, 1);
+	if (qcam_await_ready1(qcam, 0))
+		return -1;
+	idata |= parport_read_status(qcam->pport) >> 4;
+	return idata;
+}
+
+static int qcam_write_data(struct qcam *qcam, unsigned int data)
+{
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
+	unsigned int idata;
+
+	parport_write_data(qcam->pport, data);
+	idata = qcam_read_data(qcam);
+	if (data != idata) {
+		v4l2_warn(v4l2_dev, "sent %x but received %x\n", data,
+		       idata);
+		return 1;
+	}
+	return 0;
+}
+
+static inline int qcam_set(struct qcam *qcam, unsigned int cmd, unsigned int data)
+{
+	if (qcam_write_data(qcam, cmd))
+		return -1;
+	if (qcam_write_data(qcam, data))
+		return -1;
+	return 0;
+}
+
+static inline int qcam_get(struct qcam *qcam, unsigned int cmd)
+{
+	if (qcam_write_data(qcam, cmd))
+		return -1;
+	return qcam_read_data(qcam);
+}
+
+static int qc_detect(struct qcam *qcam)
+{
+	unsigned int stat, ostat, i, count = 0;
+
+	/* The probe routine below is not very reliable.  The IEEE-1284
+	   probe takes precedence. */
+	/* XXX Currently parport provides no way to distinguish between
+	   "the IEEE probe was not done" and "the probe was done, but
+	   no device was found".  Fix this one day. */
+	if (qcam->pport->probe_info[0].class == PARPORT_CLASS_MEDIA
+	    && qcam->pport->probe_info[0].model
+	    && !strcmp(qcam->pdev->port->probe_info[0].model,
+		       "Color QuickCam 2.0")) {
+		printk(KERN_DEBUG "QuickCam: Found by IEEE1284 probe.\n");
+		return 1;
+	}
+
+	if (probe < 2)
+		return 0;
+
+	parport_write_control(qcam->pport, 0xc);
+
+	/* look for a heartbeat */
+	ostat = stat = parport_read_status(qcam->pport);
+	for (i = 0; i < 250; i++) {
+		mdelay(1);
+		stat = parport_read_status(qcam->pport);
+		if (ostat != stat) {
+			if (++count >= 3)
+				return 1;
+			ostat = stat;
+		}
+	}
+
+	/* Reset the camera and try again */
+	parport_write_control(qcam->pport, 0xc);
+	parport_write_control(qcam->pport, 0x8);
+	mdelay(1);
+	parport_write_control(qcam->pport, 0xc);
+	mdelay(1);
+	count = 0;
+
+	ostat = stat = parport_read_status(qcam->pport);
+	for (i = 0; i < 250; i++) {
+		mdelay(1);
+		stat = parport_read_status(qcam->pport);
+		if (ostat != stat) {
+			if (++count >= 3)
+				return 1;
+			ostat = stat;
+		}
+	}
+
+	/* no (or flatline) camera, give up */
+	return 0;
+}
+
+static void qc_reset(struct qcam *qcam)
+{
+	parport_write_control(qcam->pport, 0xc);
+	parport_write_control(qcam->pport, 0x8);
+	mdelay(1);
+	parport_write_control(qcam->pport, 0xc);
+	mdelay(1);
+}
+
+/* Reset the QuickCam and program for brightness, contrast,
+ * white-balance, and resolution. */
+
+static void qc_setup(struct qcam *qcam)
+{
+	qc_reset(qcam);
+
+	/* Set the brightness. */
+	qcam_set(qcam, 11, qcam->brightness);
+
+	/* Set the height and width.  These refer to the actual
+	   CCD area *before* applying the selected decimation.  */
+	qcam_set(qcam, 17, qcam->ccd_height);
+	qcam_set(qcam, 19, qcam->ccd_width / 2);
+
+	/* Set top and left.  */
+	qcam_set(qcam, 0xd, qcam->top);
+	qcam_set(qcam, 0xf, qcam->left);
+
+	/* Set contrast and white balance.  */
+	qcam_set(qcam, 0x19, qcam->contrast);
+	qcam_set(qcam, 0x1f, qcam->whitebal);
+
+	/* Set the speed.  */
+	qcam_set(qcam, 45, 2);
+}
+
+/* Read some bytes from the camera and put them in the buffer.
+   nbytes should be a multiple of 3, because bidirectional mode gives
+   us three bytes at a time.  */
+
+static unsigned int qcam_read_bytes(struct qcam *qcam, unsigned char *buf, unsigned int nbytes)
+{
+	unsigned int bytes = 0;
+
+	qcam_set_ack(qcam, 0);
+	if (qcam->bidirectional) {
+		/* It's a bidirectional port */
+		while (bytes < nbytes) {
+			unsigned int lo1, hi1, lo2, hi2;
+			unsigned char r, g, b;
+
+			if (qcam_await_ready2(qcam, 1))
+				return bytes;
+			lo1 = parport_read_data(qcam->pport) >> 1;
+			hi1 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready2(qcam, 0))
+				return bytes;
+			lo2 = parport_read_data(qcam->pport) >> 1;
+			hi2 = ((parport_read_status(qcam->pport) >> 3) & 0x1f) ^ 0x10;
+			qcam_set_ack(qcam, 0);
+			r = lo1 | ((hi1 & 1) << 7);
+			g = ((hi1 & 0x1e) << 3) | ((hi2 & 0x1e) >> 1);
+			b = lo2 | ((hi2 & 1) << 7);
+			if (force_rgb) {
+				buf[bytes++] = r;
+				buf[bytes++] = g;
+				buf[bytes++] = b;
+			} else {
+				buf[bytes++] = b;
+				buf[bytes++] = g;
+				buf[bytes++] = r;
+			}
+		}
+	} else {
+		/* It's a unidirectional port */
+		int i = 0, n = bytes;
+		unsigned char rgb[3];
+
+		while (bytes < nbytes) {
+			unsigned int hi, lo;
+
+			if (qcam_await_ready1(qcam, 1))
+				return bytes;
+			hi = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 1);
+			if (qcam_await_ready1(qcam, 0))
+				return bytes;
+			lo = (parport_read_status(qcam->pport) & 0xf0);
+			qcam_set_ack(qcam, 0);
+			/* flip some bits */
+			rgb[(i = bytes++ % 3)] = (hi | (lo >> 4)) ^ 0x88;
+			if (i >= 2) {
+get_fragment:
+				if (force_rgb) {
+					buf[n++] = rgb[0];
+					buf[n++] = rgb[1];
+					buf[n++] = rgb[2];
+				} else {
+					buf[n++] = rgb[2];
+					buf[n++] = rgb[1];
+					buf[n++] = rgb[0];
+				}
+			}
+		}
+		if (i) {
+			i = 0;
+			goto get_fragment;
+		}
+	}
+	return bytes;
+}
+
+#define BUFSZ	150
+
+static long qc_capture(struct qcam *qcam, char __user *buf, unsigned long len)
+{
+	struct v4l2_device *v4l2_dev = &qcam->v4l2_dev;
+	unsigned lines, pixelsperline, bitsperxfer;
+	unsigned int is_bi_dir = qcam->bidirectional;
+	size_t wantlen, outptr = 0;
+	char tmpbuf[BUFSZ];
+
+	if (!access_ok(VERIFY_WRITE, buf, len))
+		return -EFAULT;
+
+	/* Wait for camera to become ready */
+	for (;;) {
+		int i = qcam_get(qcam, 41);
+
+		if (i == -1) {
+			qc_setup(qcam);
+			return -EIO;
+		}
+		if ((i & 0x80) == 0)
+			break;
+		schedule();
+	}
+
+	if (qcam_set(qcam, 7, (qcam->mode | (is_bi_dir ? 1 : 0)) + 1))
+		return -EIO;
+
+	lines = qcam->height;
+	pixelsperline = qcam->width;
+	bitsperxfer = (is_bi_dir) ? 24 : 8;
+
+	if (is_bi_dir) {
+		/* Turn the port around */
+		parport_data_reverse(qcam->pport);
+		mdelay(3);
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			qc_setup(qcam);
+			return -EIO;
+		}
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			qc_setup(qcam);
+			return -EIO;
+		}
+	}
+
+	wantlen = lines * pixelsperline * 24 / 8;
+
+	while (wantlen) {
+		size_t t, s;
+
+		s = (wantlen > BUFSZ) ? BUFSZ : wantlen;
+		t = qcam_read_bytes(qcam, tmpbuf, s);
+		if (outptr < len) {
+			size_t sz = len - outptr;
+
+			if (sz > t)
+				sz = t;
+			if (__copy_to_user(buf + outptr, tmpbuf, sz))
+				break;
+			outptr += sz;
+		}
+		wantlen -= t;
+		if (t < s)
+			break;
+		cond_resched();
+	}
+
+	len = outptr;
+
+	if (wantlen) {
+		v4l2_err(v4l2_dev, "short read.\n");
+		if (is_bi_dir)
+			parport_data_forward(qcam->pport);
+		qc_setup(qcam);
+		return len;
+	}
+
+	if (is_bi_dir) {
+		int l;
+
+		do {
+			l = qcam_read_bytes(qcam, tmpbuf, 3);
+			cond_resched();
+		} while (l && (tmpbuf[0] == 0x7e || tmpbuf[1] == 0x7e || tmpbuf[2] == 0x7e));
+		if (force_rgb) {
+			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
+				v4l2_err(v4l2_dev, "bad EOF\n");
+		} else {
+			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
+				v4l2_err(v4l2_dev, "bad EOF\n");
+		}
+		qcam_set_ack(qcam, 0);
+		if (qcam_await_ready1(qcam, 1)) {
+			v4l2_err(v4l2_dev, "no ack after EOF\n");
+			parport_data_forward(qcam->pport);
+			qc_setup(qcam);
+			return len;
+		}
+		parport_data_forward(qcam->pport);
+		mdelay(3);
+		qcam_set_ack(qcam, 1);
+		if (qcam_await_ready1(qcam, 0)) {
+			v4l2_err(v4l2_dev, "no ack to port turnaround\n");
+			qc_setup(qcam);
+			return len;
+		}
+	} else {
+		int l;
+
+		do {
+			l = qcam_read_bytes(qcam, tmpbuf, 1);
+			cond_resched();
+		} while (l && tmpbuf[0] == 0x7e);
+		l = qcam_read_bytes(qcam, tmpbuf + 1, 2);
+		if (force_rgb) {
+			if (tmpbuf[0] != 0xe || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xf)
+				v4l2_err(v4l2_dev, "bad EOF\n");
+		} else {
+			if (tmpbuf[0] != 0xf || tmpbuf[1] != 0x0 || tmpbuf[2] != 0xe)
+				v4l2_err(v4l2_dev, "bad EOF\n");
+		}
+	}
+
+	qcam_write_data(qcam, 0);
+	return len;
+}
+
+/*
+ *	Video4linux interfacing
+ */
+
+static int qcam_querycap(struct file *file, void  *priv,
+					struct v4l2_capability *vcap)
+{
+	struct qcam *qcam = video_drvdata(file);
+
+	strlcpy(vcap->driver, qcam->v4l2_dev.name, sizeof(vcap->driver));
+	strlcpy(vcap->card, "Color Quickcam", sizeof(vcap->card));
+	strlcpy(vcap->bus_info, "parport", sizeof(vcap->bus_info));
+	vcap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
+	return 0;
+}
+
+static int qcam_enum_input(struct file *file, void *fh, struct v4l2_input *vin)
+{
+	if (vin->index > 0)
+		return -EINVAL;
+	strlcpy(vin->name, "Camera", sizeof(vin->name));
+	vin->type = V4L2_INPUT_TYPE_CAMERA;
+	vin->audioset = 0;
+	vin->tuner = 0;
+	vin->std = 0;
+	vin->status = 0;
+	return 0;
+}
+
+static int qcam_g_input(struct file *file, void *fh, unsigned int *inp)
+{
+	*inp = 0;
+	return 0;
+}
+
+static int qcam_s_input(struct file *file, void *fh, unsigned int inp)
+{
+	return (inp > 0) ? -EINVAL : 0;
+}
+
+static int qcam_queryctrl(struct file *file, void *priv,
+					struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 240);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 192);
+	case V4L2_CID_GAMMA:
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+	}
+	return -EINVAL;
+}
+
+static int qcam_g_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = qcam->brightness;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = qcam->contrast;
+		break;
+	case V4L2_CID_GAMMA:
+		ctrl->value = qcam->whitebal;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int qcam_s_ctrl(struct file *file, void *priv,
+					struct v4l2_control *ctrl)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int ret = 0;
+
+	mutex_lock(&qcam->lock);
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		qcam->brightness = ctrl->value;
+		break;
+	case V4L2_CID_CONTRAST:
+		qcam->contrast = ctrl->value;
+		break;
+	case V4L2_CID_GAMMA:
+		qcam->whitebal = ctrl->value;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	if (ret == 0) {
+		parport_claim_or_block(qcam->pdev);
+		qc_setup(qcam);
+		parport_release(qcam->pdev);
+	}
+	mutex_unlock(&qcam->lock);
+	return ret;
+}
+
+static int qcam_g_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	pix->width = qcam->width;
+	pix->height = qcam->height;
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * qcam->width;
+	pix->sizeimage = 3 * qcam->width * qcam->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+
+	if (pix->height < 60 || pix->width < 80) {
+		pix->height = 60;
+		pix->width = 80;
+	} else if (pix->height < 120 || pix->width < 160) {
+		pix->height = 120;
+		pix->width = 160;
+	} else {
+		pix->height = 240;
+		pix->width = 320;
+	}
+	pix->pixelformat = V4L2_PIX_FMT_RGB24;
+	pix->field = V4L2_FIELD_NONE;
+	pix->bytesperline = 3 * pix->width;
+	pix->sizeimage = 3 * pix->width * pix->height;
+	/* Just a guess */
+	pix->colorspace = V4L2_COLORSPACE_SRGB;
+	return 0;
+}
+
+static int qcam_s_fmt_vid_cap(struct file *file, void *fh, struct v4l2_format *fmt)
+{
+	struct qcam *qcam = video_drvdata(file);
+	struct v4l2_pix_format *pix = &fmt->fmt.pix;
+	int ret = qcam_try_fmt_vid_cap(file, fh, fmt);
+
+	if (ret)
+		return ret;
+	switch (pix->height) {
+	case 60:
+		qcam->mode = QC_DECIMATION_4;
+		break;
+	case 120:
+		qcam->mode = QC_DECIMATION_2;
+		break;
+	default:
+		qcam->mode = QC_DECIMATION_1;
+		break;
+	}
+
+	mutex_lock(&qcam->lock);
+	qcam->mode |= QC_MILLIONS;
+	qcam->height = pix->height;
+	qcam->width = pix->width;
+	parport_claim_or_block(qcam->pdev);
+	qc_setup(qcam);
+	parport_release(qcam->pdev);
+	mutex_unlock(&qcam->lock);
+	return 0;
+}
+
+static int qcam_enum_fmt_vid_cap(struct file *file, void *fh, struct v4l2_fmtdesc *fmt)
+{
+	static struct v4l2_fmtdesc formats[] = {
+		{ 0, 0, 0,
+		  "RGB 8:8:8", V4L2_PIX_FMT_RGB24,
+		  { 0, 0, 0, 0 }
+		},
+	};
+	enum v4l2_buf_type type = fmt->type;
+
+	if (fmt->index > 0)
+		return -EINVAL;
+
+	*fmt = formats[fmt->index];
+	fmt->type = type;
+	return 0;
+}
+
+static ssize_t qcam_read(struct file *file, char __user *buf,
+			 size_t count, loff_t *ppos)
+{
+	struct qcam *qcam = video_drvdata(file);
+	int len;
+
+	mutex_lock(&qcam->lock);
+	parport_claim_or_block(qcam->pdev);
+	/* Probably should have a semaphore against multiple users */
+	len = qc_capture(qcam, buf, count);
+	parport_release(qcam->pdev);
+	mutex_unlock(&qcam->lock);
+	return len;
+}
+
+static const struct v4l2_file_operations qcam_fops = {
+	.owner		= THIS_MODULE,
+	.unlocked_ioctl	= video_ioctl2,
+	.read		= qcam_read,
+};
+
+static const struct v4l2_ioctl_ops qcam_ioctl_ops = {
+	.vidioc_querycap    		    = qcam_querycap,
+	.vidioc_g_input      		    = qcam_g_input,
+	.vidioc_s_input      		    = qcam_s_input,
+	.vidioc_enum_input   		    = qcam_enum_input,
+	.vidioc_queryctrl 		    = qcam_queryctrl,
+	.vidioc_g_ctrl  		    = qcam_g_ctrl,
+	.vidioc_s_ctrl 			    = qcam_s_ctrl,
+	.vidioc_enum_fmt_vid_cap 	    = qcam_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap 		    = qcam_g_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap  		    = qcam_s_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap  	    = qcam_try_fmt_vid_cap,
+};
+
+/* Initialize the QuickCam driver control structure. */
+
+static struct qcam *qcam_init(struct parport *port)
+{
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
+
+	qcam = kzalloc(sizeof(*qcam), GFP_KERNEL);
+	if (qcam == NULL)
+		return NULL;
+
+	v4l2_dev = &qcam->v4l2_dev;
+	strlcpy(v4l2_dev->name, "c-qcam", sizeof(v4l2_dev->name));
+
+	if (v4l2_device_register(NULL, v4l2_dev) < 0) {
+		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
+		kfree(qcam);
+		return NULL;
+	}
+
+	qcam->pport = port;
+	qcam->pdev = parport_register_device(port, "c-qcam", NULL, NULL,
+					  NULL, 0, NULL);
+
+	qcam->bidirectional = (qcam->pport->modes & PARPORT_MODE_TRISTATE) ? 1 : 0;
+
+	if (qcam->pdev == NULL) {
+		v4l2_err(v4l2_dev, "couldn't register for %s.\n", port->name);
+		kfree(qcam);
+		return NULL;
+	}
+
+	strlcpy(qcam->vdev.name, "Colour QuickCam", sizeof(qcam->vdev.name));
+	qcam->vdev.v4l2_dev = v4l2_dev;
+	qcam->vdev.fops = &qcam_fops;
+	qcam->vdev.ioctl_ops = &qcam_ioctl_ops;
+	qcam->vdev.release = video_device_release_empty;
+	video_set_drvdata(&qcam->vdev, qcam);
+
+	mutex_init(&qcam->lock);
+	qcam->width = qcam->ccd_width = 320;
+	qcam->height = qcam->ccd_height = 240;
+	qcam->mode = QC_MILLIONS | QC_DECIMATION_1;
+	qcam->contrast = 192;
+	qcam->brightness = 240;
+	qcam->whitebal = 128;
+	qcam->top = 1;
+	qcam->left = 14;
+	return qcam;
+}
+
+static int init_cqcam(struct parport *port)
+{
+	struct qcam *qcam;
+	struct v4l2_device *v4l2_dev;
+
+	if (parport[0] != -1) {
+		/* The user gave specific instructions */
+		int i, found = 0;
+
+		for (i = 0; i < MAX_CAMS && parport[i] != -1; i++) {
+			if (parport[0] == port->number)
+				found = 1;
+		}
+		if (!found)
+			return -ENODEV;
+	}
+
+	if (num_cams == MAX_CAMS)
+		return -ENOSPC;
+
+	qcam = qcam_init(port);
+	if (qcam == NULL)
+		return -ENODEV;
+
+	v4l2_dev = &qcam->v4l2_dev;
+
+	parport_claim_or_block(qcam->pdev);
+
+	qc_reset(qcam);
+
+	if (probe && qc_detect(qcam) == 0) {
+		parport_release(qcam->pdev);
+		parport_unregister_device(qcam->pdev);
+		kfree(qcam);
+		return -ENODEV;
+	}
+
+	qc_setup(qcam);
+
+	parport_release(qcam->pdev);
+
+	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
+		v4l2_err(v4l2_dev, "Unable to register Colour QuickCam on %s\n",
+		       qcam->pport->name);
+		parport_unregister_device(qcam->pdev);
+		kfree(qcam);
+		return -ENODEV;
+	}
+
+	v4l2_info(v4l2_dev, "%s: Colour QuickCam found on %s\n",
+	       video_device_node_name(&qcam->vdev), qcam->pport->name);
+
+	qcams[num_cams++] = qcam;
+
+	return 0;
+}
+
+static void close_cqcam(struct qcam *qcam)
+{
+	video_unregister_device(&qcam->vdev);
+	parport_unregister_device(qcam->pdev);
+	kfree(qcam);
+}
+
+static void cq_attach(struct parport *port)
+{
+	init_cqcam(port);
+}
+
+static void cq_detach(struct parport *port)
+{
+	/* Write this some day. */
+}
+
+static struct parport_driver cqcam_driver = {
+	.name = "cqcam",
+	.attach = cq_attach,
+	.detach = cq_detach,
+};
+
+static int __init cqcam_init(void)
+{
+	printk(KERN_INFO BANNER "\n");
+
+	return parport_register_driver(&cqcam_driver);
+}
+
+static void __exit cqcam_cleanup(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < num_cams; i++)
+		close_cqcam(qcams[i]);
+
+	parport_unregister_driver(&cqcam_driver);
+}
+
+MODULE_AUTHOR("Philip Blundell <philb@gnu.org>");
+MODULE_DESCRIPTION(BANNER);
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.0.4");
+
+module_init(cqcam_init);
+module_exit(cqcam_cleanup);
-- 
cgit v1.2.2