From a6dbba77a9d4b47c60d60c4f07fa79b3ca93a1d5 Mon Sep 17 00:00:00 2001 From: Vitaly Bordug Date: Sat, 28 May 2005 15:52:09 -0700 Subject: [PATCH] ppc32: Support for 82xx PQII on-chip PCI bridge This patch adds on-chip PCI bridge support for the PQ2 family. The incomplete existent code is updated with interrupt handling stuff and board-specific bits for 8272ADS and PQ2FADS; the related files were renamed (from m8260_pci to m82xx_pci) to be of more generic fashion. This is tested with 8266ADS and 8272ADS, should work on PQ2FADS as well. Signed-off-by: Vitaly Bordug Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/m82xx_pci.c | 383 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 arch/ppc/syslib/m82xx_pci.c (limited to 'arch/ppc/syslib/m82xx_pci.c') diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c new file mode 100644 index 00000000000..5e7a7edcea7 --- /dev/null +++ b/arch/ppc/syslib/m82xx_pci.c @@ -0,0 +1,383 @@ +/* + * + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 Red Hat, Inc. + * + * 2005 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m82xx_pci.h" + +/* + * Interrupt routing + */ + +static inline int +pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */ + { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */ + { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */ + }; + + const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static void +pq2pci_mask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_unmask_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +static void +pq2pci_mask_and_ack(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit)); + return; +} + +static void +pq2pci_end_irq(unsigned int irq) +{ + int bit = irq - NR_CPM_INTS; + + *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit)); + return; +} + +struct hw_interrupt_type pq2pci_ic = { + "PQ2 PCI", + NULL, + NULL, + pq2pci_unmask_irq, + pq2pci_mask_irq, + pq2pci_mask_and_ack, + pq2pci_end_irq, + 0 +}; + +static irqreturn_t +pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned long stat, mask, pend; + int bit; + + for(;;) { + stat = *(volatile unsigned long *) PCI_INT_STAT_REG; + mask = *(volatile unsigned long *) PCI_INT_MASK_REG; + pend = stat & ~mask & 0xf0000000; + if (!pend) + break; + for (bit = 0; pend != 0; ++bit, pend <<= 1) { + if (pend & 0x80000000) + __do_IRQ(NR_CPM_INTS + bit, regs); + } + } + + return IRQ_HANDLED; +} + +static struct irqaction pq2pci_irqaction = { + .handler = pq2pci_irq_demux, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "PQ2 PCI cascade", +}; + + +void +pq2pci_init_irq(void) +{ + int irq; + volatile cpm2_map_t *immap = cpm2_immr; +#if defined CONFIG_ADS8272 + /* configure chip select for PCI interrupt controller */ + immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or3 = 0xffff8010; +#elif defined CONFIG_PQ2FADS + immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801; + immap->im_memctl.memc_or8 = 0xffff8010; +#endif + for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++) + irq_desc[irq].handler = &pq2pci_ic; + + /* make PCI IRQ level sensitive */ + immap->im_intctl.ic_siexr &= + ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1))); + + /* mask all PCI interrupts */ + *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000; + + /* install the demultiplexer for the PCI cascade interrupt */ + setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction); + return; +} + +static int +pq2pci_exclude_device(u_char bus, u_char devfn) +{ + return PCIBIOS_SUCCESSFUL; +} + +/* PCI bus configuration registers. + */ +static void +pq2ads_setup_pci(struct pci_controller *hose) +{ + __u32 val; + volatile cpm2_map_t *immap = cpm2_immr; + bd_t* binfo = (bd_t*) __res; + u32 sccr = immap->im_clkrst.car_sccr; + uint pci_div,freq,time; + /* PCI int lowest prio */ + /* Each 4 bits is a device bus request and the MS 4bits + is highest priority */ + /* Bus 4bit value + --- ---------- + CPM high 0b0000 + CPM middle 0b0001 + CPM low 0b0010 + PCI reguest 0b0011 + Reserved 0b0100 + Reserved 0b0101 + Internal Core 0b0110 + External Master 1 0b0111 + External Master 2 0b1000 + External Master 3 0b1001 + The rest are reserved + */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893; + /* park bus on core */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE; + /* + * Set up master windows that allow the CPU to access PCI space. These + * windows are set up using the two SIU PCIBR registers. + */ + + immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE; + immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE; + +#ifdef M82xx_PCI_SEC_WND_SIZE + immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE; + immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE; +#endif + +#if defined CONFIG_ADS8272 + immap->im_siu_conf.siu_82xx.sc_siumcr = + (immap->im_siu_conf.siu_82xx.sc_siumcr & + ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE | + SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 | + SIUMCR_LBPC11 | SIUMCR_APPC11 | + SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) | + SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 | + SIUMCR_APPC10 | SIUMCR_CS10PC00 | + SIUMCR_BCTLC00 | SIUMCR_MMR11 ; + +#elif defined CONFIG_PQ2FADS + /* + * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]), + * and local bus for PCI (SIUMCR [LBPC]). + */ + immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr & + ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) | + SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10; +#endif + /* Enable PCI */ + immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN); + + pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) * + ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1); + freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div)); + time = (int)666666/freq; + /* due to PCI Local Bus spec, some devices needs to wait such a long + time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */ + printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq, + (time==1) ? "0.5 seconds":"1 second" ); + + { + int i; + for(i=0;i<(500*time);i++) + udelay(1000); + } + + /* setup ATU registers */ + immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO | + ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT); + + /* Set-up non-prefetchable window */ + immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT); + + /* Set-up prefetchable window */ + immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN | + (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT)); + immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT); + immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT); + + /* Inbound transactions from PCI memory space */ + immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN | + ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT)); + immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT); + immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT); + +#if defined CONFIG_ADS8272 + /* PCI int highest prio */ + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745; +#elif defined CONFIG_PQ2FADS + immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567; +#endif + /* park bus on PCI */ + immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI; + + /* Enable bus mastering and inbound memory transactions */ + early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val); + val &= 0xffff0000; + val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER; + early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val); + +} + +void __init pq2_find_bridges(void) +{ + extern int pci_assign_all_busses; + struct pci_controller * hose; + int host_bridge; + + pci_assign_all_busses = 1; + + hose = pcibios_alloc_controller(); + + if (!hose) + return; + + ppc_md.pci_swizzle = common_swizzle; + + hose->first_busno = 0; + hose->bus_offset = 0; + hose->last_busno = 0xff; + +#ifdef CONFIG_ADS8272 + hose->set_cfg_type = 1; +#endif + + setup_m8260_indirect_pci(hose, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr, + (unsigned long)&cpm2_immr->im_pci.pci_cfg_data); + + /* Make sure it is a supported bridge */ + early_read_config_dword(hose, + 0, + PCI_DEVFN(0,0), + PCI_VENDOR_ID, + &host_bridge); + switch (host_bridge) { + case PCI_DEVICE_ID_MPC8265: + break; + case PCI_DEVICE_ID_MPC8272: + break; + default: + printk("Attempting to use unrecognized host bridge ID" + " 0x%08x.\n", host_bridge); + break; + } + + pq2ads_setup_pci(hose); + + hose->io_space.start = M82xx_PCI_LOWER_IO; + hose->io_space.end = M82xx_PCI_UPPER_IO; + hose->mem_space.start = M82xx_PCI_LOWER_MEM; + hose->mem_space.end = M82xx_PCI_UPPER_MMIO; + hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET; + + isa_io_base = + (unsigned long) ioremap(M82xx_PCI_IO_BASE, + M82xx_PCI_IO_SIZE); + hose->io_base_virt = (void *) isa_io_base; + + /* setup resources */ + pci_init_resource(&hose->mem_resources[0], + M82xx_PCI_LOWER_MEM, + M82xx_PCI_UPPER_MEM, + IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory"); + + pci_init_resource(&hose->mem_resources[1], + M82xx_PCI_LOWER_MMIO, + M82xx_PCI_UPPER_MMIO, + IORESOURCE_MEM, "PCI memory"); + + pci_init_resource(&hose->io_resource, + M82xx_PCI_LOWER_IO, + M82xx_PCI_UPPER_IO, + IORESOURCE_IO | 1, "PCI I/O"); + + ppc_md.pci_exclude_device = pq2pci_exclude_device; + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pci_map_irq = pq2pci_map_irq; + ppc_md.pcibios_fixup = NULL; + ppc_md.pcibios_fixup_bus = NULL; + +} -- cgit v1.2.2