From 12fb0eb4c963452f727752aae03bbef192abed40 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 27 Jul 2010 11:26:02 +0000 Subject: powerpc/5121: add initial support for PDM360NG board Adds IFM PDM360NG device tree and platform code. Currently following is supported: - Spansion S29GL512P 256 MB NOR flash - ST Micro NAND 1 GiB flash - DIU, please use "fbcon=map:5 video=fslfb:800x480-32@60" at the kernel command line to enable PrimeView PM070WL3 Display support. - FEC - I2C - RTC, EEPROM - MSCAN - PSC UART, please pass "console=tty0 console=ttyPSC5,115200" on the kernel command line. - SPI, ADS7845 Touchscreen - USB0/1 Host - USB0 OTG Host/Device - VIU, Overlay/Capture support Signed-off-by: Markus Fischer Signed-off-by: Wolfgang Grandegger Signed-off-by: Michael Weiss Signed-off-by: Detlev Zundel Signed-off-by: Anatolij Gustschin Signed-off-by: Grant Likely --- arch/powerpc/platforms/512x/pdm360ng.c | 129 +++++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 arch/powerpc/platforms/512x/pdm360ng.c (limited to 'arch/powerpc/platforms/512x/pdm360ng.c') diff --git a/arch/powerpc/platforms/512x/pdm360ng.c b/arch/powerpc/platforms/512x/pdm360ng.c new file mode 100644 index 00000000000..0575e858291 --- /dev/null +++ b/arch/powerpc/platforms/512x/pdm360ng.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 2010 DENX Software Engineering + * + * Anatolij Gustschin, + * + * PDM360NG board setup + * + * This is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include +#include + +#include "mpc512x.h" + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +#include +#include +#include +#include + +static void *pdm360ng_gpio_base; + +static int pdm360ng_get_pendown_state(void) +{ + u32 reg; + + reg = in_be32(pdm360ng_gpio_base + 0xc); + if (reg & 0x40) + setbits32(pdm360ng_gpio_base + 0xc, 0x40); + + reg = in_be32(pdm360ng_gpio_base + 0x8); + + /* return 1 if pen is down */ + return (reg & 0x40) == 0; +} + +static struct ads7846_platform_data pdm360ng_ads7846_pdata = { + .model = 7845, + .get_pendown_state = pdm360ng_get_pendown_state, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static int __init pdm360ng_penirq_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); + if (!np) { + pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); + return -ENODEV; + } + + pdm360ng_gpio_base = of_iomap(np, 0); + of_node_put(np); + if (!pdm360ng_gpio_base) { + pr_err("%s: Can't map gpio regs.\n", __func__); + return -ENODEV; + } + out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); + setbits32(pdm360ng_gpio_base + 0x18, 0x2000); + setbits32(pdm360ng_gpio_base + 0x10, 0x40); + + return 0; +} + +static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct device *dev = __dev; + + if ((event == BUS_NOTIFY_ADD_DEVICE) && + of_device_is_compatible(dev->of_node, "ti,ads7846")) { + dev->platform_data = &pdm360ng_ads7846_pdata; + return NOTIFY_OK; + } + return NOTIFY_DONE; +} + +static struct notifier_block pdm360ng_touchscreen_nb = { + .notifier_call = pdm360ng_touchscreen_notifier_call, +}; + +static void __init pdm360ng_touchscreen_init(void) +{ + if (pdm360ng_penirq_init()) + return; + + bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); +} +#else +static inline void __init pdm360ng_touchscreen_init(void) +{ +} +#endif /* CONFIG_TOUCHSCREEN_ADS7846 */ + +void __init pdm360ng_init(void) +{ + mpc512x_init(); + pdm360ng_touchscreen_init(); +} + +static int __init pdm360ng_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ifm,pdm360ng"); +} + +define_machine(pdm360ng) { + .name = "PDM360NG", + .probe = pdm360ng_probe, + .setup_arch = mpc512x_setup_diu, + .init = pdm360ng_init, + .init_early = mpc512x_init_diu, + .init_IRQ = mpc512x_init_IRQ, + .get_irq = ipic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, +}; -- cgit v1.2.2