From e27c3c5c7e0fb107990c7f465a3525312f6d45aa Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 7 Mar 2011 08:42:00 +0100 Subject: ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation Currently all boards using the s3c2410_udc driver use a GPIO to control the state of the pullup, as a result the same code is reimplemented in each board This patch changes these boards to use the common implementation for GPIO controlled pullup in the UDC driver. Signed-off-by: Lars-Peter Clausen Acked-by: Vasily Khoruzhick Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-s3c2440/mach-gta02.c | 22 ++-------------------- 1 file changed, 2 insertions(+), 20 deletions(-) (limited to 'arch/arm/mach-s3c2440/mach-gta02.c') diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 9f2c14ec718..37405d9abe3 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -455,28 +455,10 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = { }; -static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd) -{ - switch (cmd) { - case S3C2410_UDC_P_ENABLE: - pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1); - break; - case S3C2410_UDC_P_DISABLE: - pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__); - gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0); - break; - case S3C2410_UDC_P_RESET: - pr_debug("%s S3C2410_UDC_P_RESET\n", __func__); - /* FIXME: Do something here. */ - } -} - /* Get PMU to set USB current limit accordingly. */ -static struct s3c2410_udc_mach_info gta02_udc_cfg = { +static struct s3c2410_udc_mach_info gta02_udc_cfg __initdata = { .vbus_draw = gta02_udc_vbus_draw, - .udc_command = gta02_udc_command, - + .pullup_pin = GTA02_GPIO_USB_PULLUP, }; /* USB */ -- cgit v1.2.2