aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/oxygen
Commit message (Collapse)AuthorAge
* ALSA: virtuoso: fix Xonar D1/DX front panel microphoneClemens Ladisch2010-05-12
| | | | | | | | | | | Commit 65c3ac885ce9852852b895a4a62212f62cb5f2e9 in 2.6.33 accidentally left out the initialization of the AC97 codec FMIC2MIC bit, which broke recording from the front panel microphone. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* ALSA: oxygen: change || to &&Clemens Ladisch2010-03-03
| | | | | | | | | | In the original code the condition was always true (hopefully) because WM8776_HPLVOL is zero. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan2010-02-09
| | | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add Xonar DS supportClemens Ladisch2010-01-18
| | | | | | | Add experimental support for the Asus Xonar DS. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* sound: oxygen: fix input monitor control namesClemens Ladisch2009-09-28
| | | | | | | | Insert "Playback" into the input monitor control names to prevent alsa-lib from treating these controls as global controls. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: add high-pass filter controlClemens Ladisch2009-09-28
| | | | | | | Add a control that allows disabling the high-pass filter of the WM8785 ADC. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: add digital filter controlClemens Ladisch2009-09-28
| | | | | | | | Add a control to select between sharp and slow roll-of filter responses of the DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add PCM1796 oversampling controlClemens Ladisch2009-09-28
| | | | | | | | Add a control to increase the oversampling factor to 128x on cards with PCM1796 or PCM1792A DACs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: allow custom MCLK ratesClemens Ladisch2009-09-28
| | | | | | | | Add a callback that allows model drivers to modify the default I2S MCLK rate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add headphone impedance controlClemens Ladisch2009-09-28
| | | | | | | | Add a mixer control to adjust the headphone amplifier output for headphones with different impedances. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: cache codec registersClemens Ladisch2009-09-28
| | | | | | | Keep a cache of codec registers to avoid unnecessary writes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: more hardware documentationClemens Ladisch2009-09-28
| | | | | | | Add some comments describing the hardware pin routing. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: add stereo upmixing to center/LFE channelsClemens Ladisch2009-09-28
| | | | | | | | | Add the possibility to route a mix of the two channels of stereo data to the center and LFE outputs. This is implemented only for models where the DACs support this, i.e., for the Xonar D1 and DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: better defaults for upmixing controlClemens Ladisch2009-09-28
| | | | | | | | | On card models with two-channel outputs, the base driver can automatically disable the upmixing control so that the model drivers do not need to do this. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: fix Xonar Essence ST supportClemens Ladisch2009-09-28
| | | | | | | | The Essence ST uses the CS2000 chip to generate the DAC master clock, so we better initialize and program it appropriately. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: split virtuoso.cClemens Ladisch2009-09-28
| | | | | | | | The virtuoso.c file has become rather big. This patch splits it up so that only code for very similar card models is in one file. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: fix for PI7C9X110 compatibilityClemens Ladisch2009-09-28
| | | | | | | | If the card is used with a Pericom PI7C9X110 PCI-E/PCI bridge, reconfigure the latter's PCI buffering to fix an unknown problem. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: do not try to restore nonexistent EEPROMClemens Ladisch2009-09-28
| | | | | | | | On cards where the EEPROM was deliberately omitted, we do not need to try to restore the EEPROM's contents. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: work around MCE when changing volumeClemens Ladisch2009-09-07
| | | | | | | | | | | | | | | | | When the volume is changed continuously (e.g., when the user drags a volume slider with the mouse), the driver does lots of I2C writes. Apparently, the sound chip can get confused when we poll the I2C status register too much, and fails to complete a read from it. On the PCI-E models, the PCI-E/PCI bridge gets upset by this and generates a machine check exception. To avoid this, this patch replaces the polling with an unconditional wait that is guaranteed to be long enough. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Johann Messner <johann.messner at jku.at> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: handle cards with missing EEPROMClemens Ladisch2009-09-03
| | | | | | | | | | | | The card model detection code introduced in 2.6.30 that tries to work around partially broken EEPROM contents by reading the EEPROM directly does not handle cards where the EEPROM has been omitted. In this case, we have to use the default ID to allow the driver to load. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Ozan Çağlayan <ozan@pardus.org.tr> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: fix MCLK rate for 192 kHz playbackClemens Ladisch2009-09-01
| | | | | | | | | | Do not forget to program the MCLK ratio for the I2S output. Otherwise, the master clock frequency can be too high for the DACs at sample frequencies above 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: fix Xonar D1/DX silence after resumeClemens Ladisch2009-07-02
| | | | | | | | | | | | When resuming, we better take the DACs out of the reset state before trying to use them. Reference: kernel bug #13599 http://bugzilla.kernel.org/show_bug.cgi?id=13599 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: make mic volume control monoClemens Ladisch2009-06-25
| | | | | | | | The microphone input and its volume register have only one channel, so we have to make the corresponding mixer control a mono control. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add Xonar Essence ST supportClemens Ladisch2009-05-25
| | | | | | | Add support for the Asus Xonar Essence ST and its daughterboard. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: enable HDAV S/PDIF inputClemens Ladisch2009-05-25
| | | | | | | | | | The Xonar HDAV1.3 has a digital input jack, so enable the corresponding device. This is not related to the HDMI stuff, which stays unsupported. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add another DX PCI IDClemens Ladisch2009-05-25
| | | | | | | Add another PCI ID for a second revision of the Xonar DX. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: reset DMA when stream is closedClemens Ladisch2009-05-25
| | | | | | | | | When a PCM stream is closed, flush the corresponding DMA channel. Otherwise, the DMA controller would continue to output the last sample which would result in a DC offset on the output. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: enable headphone output on Claro cardsClemens Ladisch2009-03-09
| | | | | | | | On the HT-Omega Claro (halo) sound cards, the headphone amplifier must be enabled explicitly by setting a GPIO bit. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: zero-initialize model dataClemens Ladisch2009-02-27
| | | | | | | | | Model drivers assume that model_data is zeroed, so we better use kzalloc() (like we did before when it was allocated together with the card structure). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: add Xonar Essence STX supportClemens Ladisch2009-02-26
| | | | | | | Add support for the Asus Xonar Essence STX sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: virtuoso: increase minimum volume to -60 dBClemens Ladisch2009-02-20
| | | | | | | | | Use -60 dB as the minimum value of the master volume mixer control. While the DACs would support ranges down to about -120 dB, such attenuations are not useful in practice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: handle AK5385 ADC on Claro halo cardsClemens Ladisch2009-02-20
| | | | | | | | | | | | | The HT-Omega Claro halo's ADC is an AK5385 instead of a WM8785, so we should handle the ADC parameters as we do with the X-Meridian. Using the code for the wrong ADC does not seem to have any audible effects, and the Windows driver does it, but it is nonetheless a good idea to run the AK5385 with an oversampling ratio that is not outside the documented limits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: automatically restore overwritten EEPROMClemens Ladisch2009-02-19
| | | | | | | | | | | | If the EEPROM was partially overwritten (which seems to happen before the OS is booted), restore its entire contents by deducing it from the remaining information. This does not have any effect on the Linux driver, which works even with incomplete information in the EEPROM, but it makes other drivers work again. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: handle cards with broken EEPROMClemens Ladisch2009-02-19
| | | | | | | | | | | | | | | | | Under as yet unknown circumstances, the first word of the sound card's EEPROM gets overwritten. When this has happened, we cannot rely on the subsystem IDs that the kernel reads from the PCI configuration registers. Instead, we read the IDs directly from the EEPROM and do the ID matching manually. Because the model-specific driver cannot determine the model before calling oxygen_pci_probe(), that function now gets a get_model() callback as parameter. The customizing of the model structure, which was formerly done by the probe() callback, also has moved into get_model(). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: use static driver nameClemens Ladisch2009-02-19
| | | | | | | | | When allocating resources, use a fixed name instead of reading it from the model structure. This allows us to allocate the resources before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: allocate model_data dynamicallyClemens Ladisch2009-02-19
| | | | | | | | | Allocate the model-specific data dynamically instead of including it in the memory block of the card structure. This will allow us to determine the actual model after the card creation. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: oxygen: make the owner module a parameter of the probe functionClemens Ladisch2009-02-19
| | | | | | | | | | | Move the owner field out of the oxygen_model structure and make it a parameter of oxygen_pci_probe(), because the actual owner module does not depend on the card model. Furthermore, moving it out of the model structure allows us to create the card structure before the actual model is known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* Merge branch 'topic/snd_card_new-err' into topic/oxygenTakashi Iwai2009-02-19
|\
| * ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai2009-01-12
| | | | | | | | | | | | | | Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: virtuoso: revert "do not overwrite EEPROM on Xonar D2/D2X"Clemens Ladisch2009-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 7e86c0e6850504ec9516b953f316a47277825e33 ("do not overwrite EEPROM on Xonar D2/D2X") because it did not actually help with the problem. More user reports show that the overwriting of the EEPROM is not triggered by using this driver but by installing Linux, and that the installation of any other operating system (even one without any CMI8788 driver) has the same effect. In other words, the presence of this driver does not have any effect on the occurrence of the error. (So far, the available evidence seems to point to a BIOS bug.) Furthermore, it turns out that the EEPROM chip is protected against stray write commands by the command format and by requiring a separate write-enable command, so the error scenario in the previous commit (that SPI writes can be misinterpreted as an EEPROM write command) is not even theoretically possible. The mixer control that was removed as a consequence of the previous commit can only be partially emulated in userspace, which also means it cannot be seen be the in-kernel OSS API emulation, so it is better to revert that change. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: virtuoso: add newlineClemens Ladisch2009-01-19
| | | | | | | | | | | | | | Add a missing newline. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: virtuoso: enable UART on Xonar HDAV1.3Clemens Ladisch2009-01-19
| | | | | | | | | | | | | | | | | | This hardware has a better chance of working correctly if we don't forget to enable it. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* | sound: virtuoso: do not overwrite EEPROM on Xonar D2/D2XClemens Ladisch2009-01-15
|/ | | | | | | | | | | | | | | | | | | | On the Asus Xonar D2 and D2X models, the SPI chip select signal for the fourth DAC shares its pin with the serial clock for the EEPROM that contains the PCI subdevice ID values. It appears that when DAC registers are written and some other unknown conditions occur (probably noise on the EEPROM's chip select line), the EEPROM gets overwritten with garbage, which makes it impossible to properly detect the card later. Therefore, we better avoid DAC register writes and make sure that the driver works with the DAC's registers' default values. Consequently, the sample format is now I2S instead of left-justified (no user-visible change), and the DAC's volume/mute registers cannot be used anymore (volume changes are now done by the software volume plugin). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: oxygen: add Claro halo supportClemens Ladisch2008-11-28
| | | | | | | Add support for the HT-Omega Claro halo (XT). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: oxygen: wait for ACK when resetting UARTClemens Ladisch2008-09-24
| | | | | | | | After sending a reset command to the UART, wait some time for the ACK to be generated (and to be read and dropped by the interrupt handler) before sending the next command. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: virtuoso: add Xonar HDAV1.3 supportClemens Ladisch2008-09-22
| | | | | | Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: oxygen: rename first PCM deviceClemens Ladisch2008-09-22
| | | | | | | Rename the first PCM device from "Analog" to "Multichannel" because it can be used for HDMI output on the Xonar HDAV. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: virtuoso: rename AC97 callback functionClemens Ladisch2008-09-22
| | | | | | | Rename the callback function that switches between line and mic inputs on the Xonar D1 because it is also usable on other models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* ALSA: virtuoso: make number of PCM1796 DACs configurableClemens Ladisch2008-09-22
| | | | | | | Do not use a hardcoded number when iterating over the PCM1796 DACs to allow for cards with a different number of analog output channels. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>