aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* rtlwifi: Convert to asynchronous firmware loadLarry Finger2012-01-30
| | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a kernel bugzilla report and two recent mail threads. The kernel bugzilla report is https://bugzilla.kernel.org/show_bug.cgi?id=42632, which reports a udev timeout on boot. The first mail thread, which was on LKML (http://lkml.indiana.edu/hypermail/ linux/kernel/1112.3/00965.html) was for a WARNING that occurs after a suspend/resume cycle for rtl8192cu. The scond mail thread (http://marc.info/?l=linux-wireless&m=132655490826766&w=2) concerned changes in udev that break drivers that delay while firmware is loaded on modprobe. This patch converts all rtlwifi-based drivers to use the asynchronous firmware loading mechanism. Drivers rtl8192ce, rtl8192cu and rtl8192de share a common callback routine. Driver rtl8192se needs different handling of the firmware, thus it has its own code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Print the correct channel modeSujith Manoharan2012-01-30
| | | | | | | | | channelFlags doesn't contain the operating HT mode. Use IS_CHAN_HT40 to determine if the current channel is in HT40 mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Load firmware asynchronouslySujith Manoharan2012-01-30
| | | | | | | | | This patch modifies ath9k_htc to load the needed firmware in an asynchronous manner, fixing timeouts that were introduced with the new udev changes. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: always restrict scan dwell in P2PJohannes Berg2012-01-30
| | | | | | | | | | | | | | | | | | Whenever the PAN (P2P) context is active, it has timers in the uCode that prevent sleep, so scanning can't be out of channel for more than the beacon interval programmed into the device. Before this patch, a full scan including any passive channels when P2P was active would stall forever because it wouldn't find time to execute the passive requests (for default beacon intervals of 100 TU.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add option to disalbe LEDWey-Yi Guy2012-01-30
| | | | | | | | Led has no use for some platform. Add additional module parameter option to disable LED Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix uCode event tracingJohannes Berg2012-01-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix multiple bugs in event tracing: 1) If you enable uCode tracing with the device down, it will still attempt to access the device and continuously log "MAC is in deep sleep!" errors. Fix this by only starting logging when the device is actually alive. 2) Now you can set the flag when the device is down, but logging doesn't happen when you bring it up. To fix that, start logging when the device comes alive. This means we don't log before -- we could do that but I don't need it right now. 3) For some reason we read the error instead of the event log -- use the right pointer. 4) Optimise SRAM reading of event log header. 5) Fix reading write pointer == capacity, which can happen due to racy SRAM access 6) Most importantly: fix an error where we would try to read WAY too many events (like 2^32-300) when we read the wrap counter before it is updated by the uCode -- this does happen in practice and will cause the driver to hang the machine. 7) Finally, change the timer to 10ms instead of 100ms as 100ms is too slow to capture all data with a normal event log and with 100ms the log will wrap multiple times before we have a chance to read it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: fix typoWey-Yi Guy2012-01-30
| | | | | | | Fix few places of typo Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Move pr_fmt macros to a single locationLarry Finger2012-01-30
| | | | | | | | | Although the rtlwifi family of devices contains 11 copies of the pr_fmt macro, the macro is not defined for all routines that need it. By moving the macro to wifi.h, a single copy is available for all routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: use WARN_ON_ONCE in ath_rc_get_highest_rixJohn W. Linville2012-01-30
| | | | | | | The device seems to survive the issue, so no need to flood the logs about it... Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwl8k: Configuring correct MAC address in broadcast keyYogesh Ashok Powar2012-01-27
| | | | | | | | | | While configuring the broadcast key in the hardware, in multi-BSS environment, BSSes other than first were incorrectly configured with the MAC address of first BSS. Fixing it with correct MAC addresses. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: update BSS parameters in dump_station_info()Amitkumar Karwar2012-01-27
| | | | | | | | | | This enables user to check beacon interval, DTIM period, short slot time and short preamble information using "iw dev mlan0 link" command when station is in connected state. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: pass priv pointer instead of adapterAvinash Patil2012-01-27
| | | | | | | | | | Pass mwifiex_private pointer directly to wmm_add_buf_txqueue() instead of passing adapter and then deriving priv again in mwifiex_get_priv_by_id(). This reduces a 'for' loop in TX path. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2800usb: remove PWR_PIN_CFG=0x3 during initStanislaw Gruszka2012-01-27
| | | | | | | | | | This seems to be only needed as workaround for hardware problem on PCI devices. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2800: zero MAC_SYS_CTRL bits during BBP and MAC resetStanislaw Gruszka2012-01-27
| | | | | | | | | | Zero all other bits than RESET_CSR and RESET_BBP when want to do the reset, that the vendor driver behaviour. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2800: disable DMA after firmware loadStanislaw Gruszka2012-01-27
| | | | | | | | | We can receive frames just after firmware load with current code, so disable DMA just after firmware is loaded, not before. Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2800usb: initialize H2M_INT_SRC registerStanislaw Gruszka2012-01-27
| | | | | | | | | | | Ralink USB driver initialize H2M_INT_SRC to 0 after firmware load, and never touch this register later. It is not touched at all by Ralink PCI driver. Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* carl9170: allow users to lower output power levelChristian Lamparter2012-01-27
| | | | | | | | | | This patch implements a simple way of reducing the output power of the device by a configurable upper limit. Requested-by: Harshal Chhaya <harshal@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make CQM RSSI support per virtual interfaceJohannes Berg2012-01-27
| | | | | | | | | | Similar to the previous beacon filtering patch, make CQM RSSI support depend on the flags that the driver set for virtual interfaces. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: make beacon filtering per virtual interfaceJohannes Berg2012-01-27
| | | | | | | | | | | | Due to firmware limitations, we may not be able to support beacon filtering on all virtual interfaces. To allow this in mac80211, introduce per-interface driver capability flags that the driver sets when an interface is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* orinoco_usb: remove version definitionJohn W. Linville2012-01-24
| | | | | | | | | Avoids this: CC [M] drivers/net/wireless/orinoco/orinoco_usb.o drivers/net/wireless/orinoco/orinoco_usb.c:1759:13: warning: ‘version’ defined but not used Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: use bool type for no_hw_rfkill_switch module parameterJohn W. Linville2012-01-24
| | | | | | | | | | Avoids this: CC [M] drivers/net/wireless/ath/ath5k/base.o drivers/net/wireless/ath/ath5k/base.c: In function ‘__check_no_hw_rfkill_switch’: drivers/net/wireless/ath/ath5k/base.c:85:1: warning: return from incompatible pointer type Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: claim support for IBSS RSNAntonio Quartulli2012-01-24
| | | | | | | | Skip group keys configuration in hardware in order to make IBSS RSN work. Keys will be managed using software. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* NFC: Free sk_buff if nfcwilink_send failsIlan Elias2012-01-24
| | | | | | | | Free sk_buff if nfcwilink_send fails. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* NFC: Download TI NFC init scriptIlan Elias2012-01-24
| | | | | | | | | | | | | Download TI NFC init script during nfcwilink open operation, after the NFC channel is registered with TI shared transport. TI NFC init script is written in BTS format. First, read the chip version via a special vendor specific command. Second, we request the relevant BTS file from the user space, and then send the BTS commands to the chip. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* NFC: Add endian annotations to nfcwilink driverIlan Elias2012-01-24
| | | | | | | | Add endian annotations to TI nfcwilink driver. Signed-off-by: Ilan Elias <ilane@ti.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Trivial typo of "couldn" to "could" fixJoe Perches2012-01-24
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Use pr_fmt and pr_<level>Joe Perches2012-01-24
| | | | | | | | | Convert printks to pr_<level> Prefix logging with pr_fmt. Use ##__VA_ARGS__ in some WL_ logging macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Use brcmu_dbg_hex_dumpJoe Perches2012-01-24
| | | | | | | | Convert a couple of pr_debug/print_hex_dump to the standard utility. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Convert printk(KERN_DEBUG to pr_debugJoe Perches2012-01-24
| | | | | | | | | | | | | | | Use pr_debug to allow dynamic debugging to work. Move an #endif to allow brcmf_dbg_hex_dump to be outside the #if/#endif block. Move a const char* declaration to be inside a pr_debug so the function doesn't need a #if/#endif block. Don't use temporaries in debugging functions so the code can be optimized away. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Remove useless #ifdef DEBUGJoe Perches2012-01-24
| | | | | | | This doesn't do anything anymore. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Add and use brcmX_dbg_dump_hexJoe Perches2012-01-24
| | | | | | | | | Reduce the number of #ifdef DEBUG uses by adding a dbg_hex_dump routine which has the appropriate #ifdef DEBUG test. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Convert printk(KERN_DEBUG to pr_debugJoe Perches2012-01-24
| | | | | | | Allow dynamic debugging. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcm80211: Use normal DEBUG defineJoe Perches2012-01-24
| | | | | | | | | | | Current CONFIG_BRCMDBG flag when enabled does not necessarily enable proper pr_debug output when DEBUG is not also enabled. Remove BCMDBG define and just use DEBUG instead. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: claim support for IBSS RSNAntonio Quartulli2012-01-24
| | | | | | | | Disable group keys programming when using IBSS RSN. Keys will be managed using software. In this way IBSS RSN can correctly work. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* carl9170: remove eeprom data injection optionChristian Lamparter2012-01-24
| | | | | | | | | | | | In the early days, this was a quite useful software feature for testing different regdomains and chain configurations without adding debugfs cruft into the driver. Nowadays, the driver's phy code seems to be stable and there's no need for it anymore. Therefore I decided to removed altogether. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: derive priv from net_device instead of wiphyYogesh Ashok Powar2012-01-24
| | | | | | | | | | | | | Currently mwifiex_private pointers are derived from wiphy structures. This will always work as long as there is only one net_device associated with one wiphy. In scenarios where there are multiple net_devices associated with single wiphy, one should use net_device to derive the priv. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mwifiex: use bss_type and bss_num to retrieve privYogesh Ashok Powar2012-01-24
| | | | | | | | | | | | | | Current implementation, for retrieving priv from adapter, uses bss_index. In multi interface environment supporting different types, bss_index may not be unique. Use bss_type along with bss_num to retrieve the priv. bss_index is removed with this change. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcma: Enable logging of SPROM offsetLarry Finger2012-01-24
| | | | | | | | The SPROM location has been relocated again for some devices. This patch will log the offset when CONFIG_BCMA_DEBUG has been selected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* carl9170: claim to support IBSS RSN.Nicolas Cavallari2012-01-24
| | | | | | | | | | On carl9170, HW encryption is disabled on IBSS; the mac80211 software-based encryption is used instead. As mac80211 supports IBSS RSN (per-STA GTK), claim its support in the carl9170 PHY. Signed-off-by: Nicolas Cavallari <cavallar@lri.fr> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* drivers/net/wireless/mwifiex/scan.c: convert GFP_KERNEL to GFP_ATOMICJulia Lawall2012-01-24
| | | | | | | | | | | | | | The function is called with locks held and thus should not use GFP_KERNEL. The semantic patch that makes this report is available in scripts/coccinelle/locks/call_kern.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192se: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192de: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192cu: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192ce: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192c_common: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: Update copyright datesLarry Finger2012-01-24
| | | | | Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtl8192cu: Remove dead code never selectedLarry Finger2012-01-24
| | | | | | | | | | The original driver contained some conditional code that was not selected, but was not deleted in case it would be used later. That code can now be removed. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rtlwifi: rtl8192c_common: rtl8192de: Check for allocation failuresLarry Finger2012-01-24
| | | | | | | | | | | In https://bugzilla.redhat.com/show_bug.cgi?id=771656, a kernel bug was triggered due to a failed skb allocation that was not checked. This event lead to an audit of all memory allocations in the complete rtlwifi family of drivers. This patch fixes the rest. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update CopyrightWey-Yi Guy2012-01-24
| | | | | | | Update Copyright to 2012 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: add testmode cmd IWL_TM_CMD_APP2DEV_GET_FW_INFOKenny Hsu2012-01-24
| | | | | | | | | | | | Add new testmode command IWL_TM_CMD_APP2DEV_GET_FW_INFO for reporting the following information of existing loaded uCode image. + uCode type + Instruction section size + Data section size Signed-off-by: Kenny Hsu <kenny.hsu@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-22 10:50:30 -0400