aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/mtd
Commit message (Collapse)AuthorAge
* UBI: fix check on unsigned longRoel Kluin2009-10-20
| | | | | | | result is unsigned, the wrong check was used. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* UBI: fix backward compatibilityArtem Bityutskiy2009-10-20
| | | | | | | | | | | | | Commit 32bc4820287a1a03982979515949e8ea56eac641 did not fully fix the backward compatibility issues. We still fail to properly handle situations when the first PEB contains non-zero image sequence number, but one of the following PEBs contains zero image sequence number. For example, this may happen if we mount a new image with an old kernel, and then try to mount it in the new kernel. This patch should fix the issue. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
* headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-11
| | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* block: use normal I/O path for discard requestsChristoph Hellwig2009-10-01
| | | | | | | | | | | | | | | | | | | | | | | | prepare_discard_fn() was being called in a place where memory allocation was effectively impossible. This makes it inappropriate for all but the most trivial translations of Linux's DISCARD operation to the block command set. Additionally adding a payload there makes the ownership of the bio backing unclear as it's now allocated by the device driver and not the submitter as usual. It is replaced with QUEUE_FLAG_DISCARD which is used to indicate whether the queue supports discard operations or not. blkdev_issue_discard now allocates a one-page, sector-length payload which is the right thing for the common ATA and SCSI implementations. The mtd implementation of prepare_discard_fn() is replaced with simply checking for the request being a discard. Largely based on a previous patch from Matthew Wilcox <matthew@wil.cx> which did the prepare_discard_fn but not the different payload allocation yet. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds2009-09-24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits) microblaze: Disable heartbeat/enable emaclite in defconfigs microblaze: Support simpleImage.dts make target microblaze: Fix _start symbol to physical address microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C microblaze: Actually show KiB rather than pages in "Freeing initrd memory:" microblaze: Support ptrace syscall tracing. microblaze: Updated CPU version and FPGA family codes in PVR microblaze: Generate correct signal and siginfo for integer div-by-zero microblaze: Don't be noisy when userspace causes hardware exceptions microblaze: Remove ipc.h file which points to non-existing asm-generic file microblaze: Clear sticky FSR register after generating exception signals microblaze: Ensure CPU usermode is set on new userspace processes microblaze: Use correct kbuild variable KBUILD_CFLAGS microblaze: Save and restore msr in hw exception microblaze: Add architectural support for USB EHCI host controllers microblaze: Implement include/asm/syscall.h. microblaze: Improve checking mechanism for MSR instruction microblaze: Add checking mechanism for MSR instruction ...
| * mtd: Enable Open Firmware initialisation of MTD devices and maps for MicroBlazeJohn Williams2009-09-21
| | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* | Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-09-23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (58 commits) mtd: jedec_probe: add PSD4256G6V id mtd: OneNand support for Nomadik 8815 SoC (on NHK8815 board) mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board) m25p80: Add Spansion S25FL129P serial flashes jffs2: Use SLAB_HWCACHE_ALIGN for jffs2_raw_{dirent,inode} slabs mtd: sh_flctl: register sh_flctl using platform_driver_probe() mtd: nand: txx9ndfmc: transfer 512 byte at a time if possible mtd: nand: fix tmio_nand ecc correction mtd: nand: add __nand_correct_data helper function mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G mtd: inftl: fix fold chain block number mtd: jedec: fix compilation problem with I28F640C3B definition mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver mtd: ofpart: Check availability of reg property instead of name property driver/Makefile: Initialize "mtd" and "spi" before "net" mtd: omap: adding DMA mode support in nand prefetch/post-write mtd: omap: add support for nand prefetch-read and post-write mtd: add nand support for w90p910 (v2) mtd: maps: add mtd-ram support to physmap_of mtd: pxa3xx_nand: add single-bit error corrections reporting ...
| * | mtd: jedec_probe: add PSD4256G6V idMike Frysinger2009-09-23
| | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: driver for Nomadik 8815 SoC (on NHK8815 board)Alessandro Rubini2009-09-20
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | Merge branch 'master' of ↵David Woodhouse2009-09-20
| |\| | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/mtd/mtdcore.c Merged in order that I can apply the Nomadik nand/onenand support patches.
| * | m25p80: Add Spansion S25FL129P serial flashesKevin Cernekee2009-09-19
| | | | | | | | | | | | | | | | | | | | | Tested 64KiB block size only. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: sh_flctl: register sh_flctl using platform_driver_probe()David Woodhouse2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As with orion_nand in commit f33dabbe79fdf7a8568c65faa1db7794c87ac4d3 ("register orion_nand using platform_driver_probe()"), avoid .init.text problems by using platform_device_probe(). This isn't going to be hotplugged anyway. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: txx9ndfmc: transfer 512 byte at a time if possibleAtsushi Nemoto2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Using __nand_correct_data() helper function, this driver can read 512 byte (with 6 byte ECC) at a time. This results minor performance improvement. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: fix tmio_nand ecc correctionAtsushi Nemoto2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver may be reading 512 bytes at a times, but still calculates 256-byte sector ECC. So the nand_correct_data() is not appropriate for this driver. Implement its ecc.correct function calling __nand_correct_data() twice. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: add __nand_correct_data helper functionAtsushi Nemoto2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split nand_correct_data() into two part, a pure calculation function and a wrapper for mtd interface. The tmio_nand driver can implement its ecc.correct function easily using this __nand_correct_data helper. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128GMassimo Cirillo2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The M29W128G Numonyx flash devices are intolerant to any 0xFF command: in the Cfi_util.c the function cfi_qry_mode_off() (that resets the device after the autoselect mode) must have a 0xF0 command after the 0xFF command. This fix solves also the cause of the fixup_M29W128G_write_buffer() fix, that can be removed now. The following patch applies to 2.6.30 kernel. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Acked-by: Alexey Korolev <akorolev@infradead.org> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: inftl: fix fold chain block numberMohanlal Jangir2009-09-19
| | | | | | | | | | | | | | | Signed-off-by: Mohan Lal Jangir <mohanlaljangir@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: jedec: fix compilation problem with I28F640C3B definitionStefan Roese2009-09-19
| | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driverFeng Kan2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix ECC Correction bug where the byte offset location were double fliped causing correction routine to toggle the wrong byte location in the ECC segment. The ndfc_calculate_ecc routine change the order of getting the ECC code. /* The NDFC uses Smart Media (SMC) bytes order */ ecc_code[0] = p[2]; ecc_code[1] = p[1]; ecc_code[2] = p[3]; But in the Correction algorithm when calculating the byte offset location, the b1 is used as the upper part of the address. Which again reverse the order making the final byte offset address location incorrect. byte_addr = (addressbits[b1] << 4) + addressbits[b0]; The order is change to read it in straight and let the correction function to revert it to SMC order. Cc: stable@kernel.org Signed-off-by: Feng Kan <fkan@amcc.com> Acked-by: Victor Gallardo <vgallardo@amcc.com> Acked-by: Prodyut Hazarika <phazarika@amcc.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: ofpart: Check availability of reg property instead of name propertyBenjamin Krill2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous implementation breaks the dts binding "mtd-physmap.txt". This implementation fixes the issue by checking the availability of the reg property instead of the name property. Cc: stable@kernel.org Signed-off-by: Benjamin Krill <ben@codiert.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: omap: adding DMA mode support in nand prefetch/post-writevimal singh2009-09-19
| | | | | | | | | | | | | | | | | | | | | This patch adds DMA mode support for nand prefetch/post-write engine. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: omap: add support for nand prefetch-read and post-writevimal singh2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds prefetch support to access nand flash in mpu mode. This patch also adds 8-bit nand support (omap_read/write_buf8). Prefetch can be used for both 8- and 16-bit devices. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: add nand support for w90p910 (v2)Wan ZongShun2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add w90p910 NAND driver for w90p910 evaluation board based on w90p910,there is a K8F1G08 NAND on my board. [dwmw2: depend on MTD_PARTITIONS] Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: maps: add mtd-ram support to physmap_ofWolfram Sang2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use physmap_of to access RAMs as mtd and add documenation for it. This approach is a lot less intrusive as adding an of-wrapper around plat-ram.c. As most extensions of plat-ram.c (e.g. custom map-functions) can't be mapped to the device tree anyhow, extending physmap_of seems to be the cleanest approach. Tested with a phyCORE-MPC5121e. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Vitaly Wool <vwool@ru.mvista.com> Cc: Artem Bityutskiy <dedekind@infradead.org> Cc: Ken MacLeod <ken@bitsko.slc.ut.us> Cc: Albrecht Dreß <albrecht.dress@arcor.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: pxa3xx_nand: add single-bit error corrections reportingYeasah Pell2009-09-19
| | | | | | | | | | | | | | | | | | | | | Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Yeasah Pell <yeasah@comrex.com> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: mxc_nand: fix 2KiB pagesize NAND on i.MX27Eric Benard2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows i.MX27 to support 2KiB pagesize NAND flash. We are using a 1.8V NAND flash which datasheet (unfortunately only available under NDA) says : Page size: x8: 2,112 bytes (2,048 + 64 bytes). Without this patch, all sectors are marked as bad eraseblock. Signed-off-by: Eric Benard <ebenard@eukrea.com> Acked-by : Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | phram: cleanup error handling and associated messagesMike Frysinger2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error handling in the phram driver is pretty bad -- in many places, errors are silently ignored or logged, but then still ignored in the return value. So convert all of the code to pass back the correct return value and log error messages properly (and using the new pr_fmt() helper). If everything does go smoothly, rather than exit silently, dump a helpful info message like pretty much every other MTD driver does. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Joern Engel <joern@logfs.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: m25p80: add SST WF SPI flash device informationGraf Yang2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | Support SST25WF{512,010,020,040} SPI flashes. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: m25p80: add support for AAI programming with SST SPI flashesGraf Yang2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SST SPI flashes are a bit non-standard in that they can be programmed one byte at a time (including address!), or they can be written two bytes at a time with auto address incrementing (AAI). The latter form is obviously much better for performance, so let's use it when possible. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: fix order of TEST/PARTITIONS kconfig optionsMike Frysinger2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MTD_TEST config option was added in between the MTD_PARTITIONS config and its dependent options which causes the resulting menu system to display incorrectly as MTD_TEST does not depend on MTD_PARTITIONS. So move it up a few lines where it won't cause a problem. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd/maps: gpio-addr-flash: new driver for GPIO assisted flash addressingMike Frysinger2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | This driver lets people use GPIO's for additional address lines in case their processor does not have enough address lines already. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd/maps: uclinux: depend on MTD_RAM being built into the kernelMike Frysinger2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | If MTD_RAM is built as a module, the uClinux map does not work since it can only be built in to the kernel. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd/maps: uclinux: fix building when partition support is disabledTimofei Bondarenko2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uClinux map driver doesn't even use partitions, so we shouldn't require it in order to work properly. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> CC: Greg Ungerer <gerg@uclinux.org> CC: uclinux-dev@uclinux.org CC: linux-mtd@lists.infradead.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: jedec_probe: fix NEC uPD29F064115 detectionHiroshi Ito2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | linux v2.6.31-rc6 can not detect NEC uPD29F064115. uPD29F064115 is a 16 bit device. datasheet: http://www.cn.necel.com/memory/cn/download/M16062EJ2V0DS00.pdf This applies the same fix as used for SST chips in commit ca6f12c67ed19718cf37d0f531af9438de85b70c ("jedec_probe: Fix SST 16-bit chip detection"). Signed-off-by: Hiroshi Ito <ito@mlb.co.jp> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: mtdpart: prevent a read from regions[-1]Roel Kluin2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the erase region was found in the first iteration we read from regions[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: mtdconcat: prevent a read from eraseregions[-1]Roel Kluin2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the erase region was found in the first iteration we read from eraseregions[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: lart: Prevent a read from mtd->eraseregions[-1]Roel Kluin2009-09-19
| | | | | | | | | | | | | | | | | | Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: DaVinci: Add 4-bit ECC support for large page NAND chipsSneha Narnakaje2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds 4-bit ECC support for large page NAND chips using the new ECC mode NAND_ECC_HW_OOB_FIRST. The platform data from board-dm355-evm has been adjusted to use this mode. The patches have been verified on DM355 device with 2KiB-page Micron devices using mtd-tests and JFFS2. Error correction up to 4 bits has also been verified using nandwrite/nanddump utilities. Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: add new ECC mode - ECC_HW_OOB_FIRSTSneha Narnakaje2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2KiB) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. "ECC_HW_OOB_FIRST" name suggested by Thomas Gleixner Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: add "page" parameter to all read_page/read_page_raw APIsSneha Narnakaje2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. Reviewed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: onenand: make onenand/generic.c more genericMagnus Damm2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the ARM dependency from the generic "onenand" platform device driver. This change makes the driver useful for other architectures as well. Needed for the SuperH kfr2r09 board. Apart from the obvious Kconfig bits, the most important change is the move away from ARM specific includes and platform data. Together with this change the only in-tree board code gets an update, and the driver name is also changed gracefully break potential out of tree drivers. The driver is also updated to allow NULL as platform data together with a few changes to make use of resource_size() and dev_name(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Kyungmin Park <kmpark@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: nand: register orion_nand using platform_driver_probe()Uwe Kleine-König2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | orion_nand_probe lives in .init.text, so using platform_driver_register to register it is wrong because binding a device after the init memory is discarded (e.g. via sysfs) results in an oops. As requested by Nicolas Pitre platform_driver_probe is used instead of moving the probe function to .devinit.text as proposed initially. This saves some memory, but devices registered after the driver is probed are not bound (probably there are none) and binding via sysfs isn't possible. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Lennert Buytenhek <buytenh@marvell.com> Cc: Saeed Bishara <saeed@marvell.com> Cc: Joern Engel <joern@logfs.org> Acked-by: Nicolas Pitre <nico@marvell.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: sst25l, fix lock imbalanceJiri Slaby2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add an omitted unlock to one sst25l_erase fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: SST25L (non JEDEC) SPI Flash driverRyan Mallon2009-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the non JEDEC SST25L SPI Flash devices. [dwmw2: Some cleanups] Signed-off-by: Andre Renaud <andre@bluewatersys.com> Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "H Hartley Sweeten" <hartleys@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: pmcmsp-flash: fix error paths in init_msp_flashRoel Kluin2009-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanin up after errors in init_msp_flash(). Also cleanup_msp_flash() attempts to determine the size of msp_flash with `sizeof(msp_flash) / sizeof(struct mtd_info **)' This will not work since msp_flash is not an array. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: make few symbols staticH Hartley Sweeten2009-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make mtd_group and mtd_groups static since they are only used in this file. [Amended by Artem Bityutskiy] Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: onenand: select MTD_PARTITIONSPaul Mundt2009-09-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the onenand drivers depend on mtd partition support being compiled in, so just select it. Fixes up build breakage: drivers/built-in.o: In function `generic_onenand_remove': generic.c:(.devexit.text+0x80): undefined reference to `del_mtd_partitions' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: m25p80: add support for 3 Macronix flash chipsSiddarth Gore2009-09-04
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Siddarth Gore <gores@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | mtd: tests: fix read buffer overflowsRoel Kluin2009-09-04
| | | | | | | | | | | | | | | | | | | | | | | | Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
| * | slram: Read buffer overflowRoel Kluin2009-09-04
| | | | | | | | | | | | | | | | | | | | | | | | map[count] is checked before count < SLRAM_MAX_DEVICES_PARAMS Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>