aboutsummaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAge
* [PATCH] ppc64: fix IPI on bpa_iicArnd Bergmann2005-09-09
| | | | | | | | | | | | | | | This fixes a severe bug in the bpa_iic driver that caused all sorts of problems. We had been using incorrect priority values for inter processor interrupts, which resulted in always doing CALL_FUNCTION instead of RESCHEDULE or DEBUGGER_BREAK. The symptoms cured by this patch include bad performance on SMP systems spurious kernel panics in the IPI code. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] m68knommu: extract common timer code for 68EZ328 processorGreg Ungerer2005-09-08
| | | | | | | | | Rework the 68x328 configuration and setup code. All 68x328 varients share the same timer hardware. So extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: create common timer code for 68x328 processor varientsGreg Ungerer2005-09-08
| | | | | | | Create common timer code for all 68x328 processor varients. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: register map setup for MOD5272 boardGreg Ungerer2005-09-08
| | | | | | | | | The boot loader on the MOD5272 board doesn't set the register maping, so set it in the 5272 init code. There was code in there to support this, but we had never needed to use it before. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: add timer support for the 523x ColdFire processor familyGreg Ungerer2005-09-08
| | | | | | | | Add timer support for the ColdFire 523x processor family. (It uses the ColdFire PIT timer hardware, so we just build that in). Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: extract common timer code for 68328 processorGreg Ungerer2005-09-08
| | | | | | | | | Rework the 68x328 configuration and setup code. All 68x328 varient share the same timer hardware, so extract that into its own file, instead of keeping copies in each processors setup code. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: create common config code for all 68VZ328 platformsGreg Ungerer2005-09-08
| | | | | | | | | Create common 68VZ328 config code. It is essentially the same for all boards that use this, so no point having a version of it for each. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: remove DrangonEngine2 specific config codeGreg Ungerer2005-09-08
| | | | | | | | Remove DragonEngine2 specific config code. Use common 68VZ328 config code now. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: remove uCdimm specific config codeGreg Ungerer2005-09-08
| | | | | | | Remove uCdimm specific config code. Use common 68VZ328 config code now. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] m68knommu: 523x ColdFire processor init/config MakefileGreg Ungerer2005-09-08
| | | | | Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'release' of ↵Linus Torvalds2005-09-08
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
| * [IA64] Manual merge fix for 3 filesTony Luck2005-09-08
| |\ | | | | | | | | | | | | | | | | | | | | | arch/ia64/Kconfig arch/ia64/kernel/acpi.c include/asm-ia64/irq.h Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Increase max physical address for SN platformsJack Steiner2005-09-08
| | | | | | | | | | | | | | | | | | | | | Increase the value for the maximum physical address on SN systems. Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] ensure XPC and XPNET are loaded on sn2 platforms onlyDean Nelson2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | These are SN2 only drivers. They should have platform checks to prevent them from doing evil stuff in GENERIC kernels. Signed-off-by: Martin Hicks <mort@sgi.com> Acked-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] defconfig: turn off QLOGIC_FCMartin Hicks2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | Turn off the QLOGIC_FC driver. Supposedly qla2xxx should support these devices. Do any ia64 machines have one of these devices as the boot device? Signed-off-by: Martin Hicks <mort@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] Minor cleanups - remove CONFIG_ACPI_DEALLOCATE_IRQKenji Kaneshige2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | The config option 'CONFIG_ACPI_DEALLOCATE_IRQ' is no longer needed. This patch removes it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] minor performance tune-up in ia64_switch_toChen, Kenneth W2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reenabling of psr.ic should really belong to dtr mapping code block. It make the fall through code fast since it doesn't need to execute the predicated-off instruction. Logically make more sense as well since psr.ic was turned off in .map code block. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] make exception handler in copy_user more robustChen, Kenneth W2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The exception handler in copy user always expects fault occurs only on user space address and the fall back recovery code is written with that very assumption in mind. Recent source code inspection revealed that while it worked splendid and to the expectation under normal circumstances, It broke down under unexpected condition where some address calculation might go outside the legal address range the original copy_user was called for. This patch is to make copy_user exception handler more robust and to prevent potential memory corruption. Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
| * | [IA64] page_not_present fault in region 5 is normalKiyoshi Ueda2005-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When copying data from user-space to kernel-space by __copy_user(), a page_not_present fault sometimes occurs at vmalloced kernel address because of VHPT pre-fetching. Ignore the page_not_present fault in ia64_do_page_fault() before jumping into exception handlers. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq Linus Torvalds2005-09-08
|\ \ \
| * | | [CPUFREQ] Remove trailing whitespace before \n's in printks.Dave Jones2005-09-01
| | | | | | | | | | | | | | | | | | | | From: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Dave Jones <davej@redhat.com>
| * | | [CPUFREQ] Remove extra arg from dprintk in cpufreq/speedstep-smi.cMika Kukkonen2005-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Minor fallout from my upcoming __attribute__((format(printf,x,y))) patches. The variable 'result' is untouched, so this patch just removes it. Signed-off-by: Mika Kukkonen <mikukkon@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | | [CPUFREQ] dprintf format fixes in cpufreq/speedstep-centrino.cMika Kukkonen2005-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ho-hum, did not notice there was more printf fixes for cpufreq (you should see the amount I have for isdn and reiser ...). Sorry for noise. Signed-off-by: Mika Kukkonen <mikukkon@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
| * | | [CPUFREQ] speedstep-centrino: skip extract_clock logic for acpi based centrinoVenkatesh Pallipadi2005-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | speedstep_centrino.c:extract_clock() assumes the bus speed of 100MHz, which is not true with latest laptops. Due to this assumption and due to the encoded frequency check during initialization, speedstep-centrino driver fails even on systems that has proper ACPI information to do the P-state transition. The change below moves the centrino-speedstep detection to be used only when table based P-state transition is done. For ACPI based P-state transition, we skip the centrino_cpu identification, and as a result we don't use the bus speed assumption in extract_clock. This change makes speedstep-centrino work on Pentium-M based systems, which have more than 100MHz bus speed. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Dave Jones <davej@redhat.com>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6 Linus Torvalds2005-09-08
|\ \ \ \
| * | | | [PATCH] Make sparc64 use setup-res.cDavid S. Miller2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were three changes necessary in order to allow sparc64 to use setup-res.c: 1) Sparc64 roots the PCI I/O and MEM address space using parent resources contained in the PCI controller structure. I'm actually surprised no other platforms do this, especially ones like Alpha and PPC{,64}. These resources get linked into the iomem/ioport tree when PCI controllers are probed. So the hierarchy looks like this: iomem --| PCI controller 1 MEM space --| device 1 device 2 etc. PCI controller 2 MEM space --| ... ioport --| PCI controller 1 IO space --| ... PCI controller 2 IO space --| ... You get the idea. The drivers/pci/setup-res.c code allocates using plain iomem_space and ioport_space as the root, so that wouldn't work with the above setup. So I added a pcibios_select_root() that is used to handle this. It uses the PCI controller struct's io_space and mem_space on sparc64, and io{port,mem}_resource on every other platform to keep current behavior. 2) quirk_io_region() is buggy. It takes in raw BUS view addresses and tries to use them as a PCI resource. pci_claim_resource() expects the resource to be fully formed when it gets called. The sparc64 implementation would do the translation but that's absolutely wrong, because if the same resource gets released then re-claimed we'll adjust things twice. So I fixed up quirk_io_region() to do the proper pcibios_bus_to_resource() conversion before passing it on to pci_claim_resource(). 3) I was mistakedly __init'ing the function methods the PCI controller drivers provide on sparc64 to implement some parts of these routines. This was, of course, easy to fix. So we end up with the following, and that nasty SPARC64 makefile ifdef in drivers/pci/Makefile is finally zapped. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | [PATCH] PCI: restore BAR values after D3hot->D0 for devices that need itJohn W. Linville2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | [PATCH] arch/386/pci: remap_pfn_range -> io_remap_pfn_rangeMichael S. Tsirkin2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert i386/pci to use io_remap_pfn_range instead of remap_pfn_range. This is good for Xen which reuses i386/pci/i386.c for domain 0 code. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | [PATCH] PCI: fix up pretty-names removal patchAndrew Morton2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | [PATCH] PCI: remove CONFIG_PCI_NAMESAdrian Bunk2005-09-08
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | This patch removes CONFIG_PCI_NAMES. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Linus Torvalds2005-09-08
|\ \ \ \
| * | | | [SPARC64]: Inline membar()'s again.David S. Miller2005-09-08
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since GCC has to emit a call and a delay slot to the out-of-line "membar" routines in arch/sparc64/lib/mb.S it is much better to just do the necessary predicted branch inline instead as: ba,pt %xcc, 1f membar #whatever 1: instead of the current: call membar_foo dslot because this way GCC is not required to allocate a stack frame if the function can be a leaf function. This also makes this bug fix easier to backport to 2.4.x Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge master.kernel.org:/home/rmk/linux-2.6-serial Linus Torvalds2005-09-08
|\ \ \ \
| * | | | [SERIAL] Use an enum for serial8250 platform device IDsRussell King2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than hard-coding the platform device IDs, enumerate them. We don't particularly care about the actual ID we get, just as long as they're unique. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge master.kernel.org:/home/rmk/linux-2.6-arm Linus Torvalds2005-09-08
|\ \ \ \ \ | |_|/ / / |/| | | |
| * | | | [ARM] 2891/1: S3C2410 - update s3c2410_defconfig for 2.6.13Ben Dooks2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Ben Dooks Updated the s3c2410_defconfig for the 2.6.13-git8 kernel release, as well as adding the Anubis board to the list of boards built. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | [ARM] 2890/1: OMAP 1/4: Update omap1 specific files, take 2Tony Lindgren2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Convert more drivers to register resources in board-*.c to take advantage of the driver model by David Brownell and Ladislav Michl - Use set_irq_type() for GPIO interrupts instead of omap_set_gpio_edge_ctrl() by David Brownell - Add minimal support for handling optional add-on boards, such as OSK Mistral board with LCD and keypad, by David Brownell - Minimal support for loading functions to SRAM by Tony Lindgren - Wake up from serial port by muxing RX lines temporarily into GPIO interrupts by Tony Lindgren - 32KHz sched_clock by Tony Lindgren and Juha Yrjola Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | [ARM] Fix ARMv6 VIPT cache >= 32KRussell King2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the necessary changes to ensure that we flush the caches correctly with aliasing VIPT caches. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | | [ARM] Add suspend/resume support to locomo.cJohn Lenz2005-09-08
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | This adds low-level suspend/resume support to locomo.c. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | [PATCH] ppc32: Fix head_4xx.S compile errorKumar Gala2005-09-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | head_4xx.S wasn't compiling due to a missing #endif Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | Merge linux-2.6 with linux-acpi-2.6Len Brown2005-09-08
|\| | |
| * | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 Linus Torvalds2005-09-07
| |\ \ \
| | * | | [SPARC64]: Fix set/get MTU cases in sunos_ioctl()David S. Miller2005-09-06
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | Need to use compat struct sizes and compat_sys_ioctl(). Reported by Adrian Bunk via kernel bugzilla #2683 Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [PATCH] bogus #if (simserial)viro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] CHECKFLAGS on ppc64 got brokenviro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that asm-powerpc/* is using ifdefs on __powerpc64__ we need to add it to CHECKFLAGS on ppc64. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] bogus #if (arch/um/kernel/mem.c)viro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] bogus symbol used in arch/um/os-Linux/elf_aux.cviro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | elf_aux is userland code; it uses symbol (ELF_CLASS) that doesn't exist in userland headers; pulled into kernel-offsets.h, switched elf_aux to using it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] lost chunk of "uml: build cleanups"viro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A piece of the UML stubs patch got lost - it has Killed STUBS_CFLAGS - it's not needed and the only remaining use had been gratitious - it only polluted CFLAGS in description and does remove it in arch/um/Makefile-x86_64, but forgets to do the same in i386 counterpart. Lost chunk follows: Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | [PATCH] Kconfig fix (BLK_DEV_FD dependencies)viro@ZenIV.linux.org.uk2005-09-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sanitized and fixed floppy dependencies: split the messy dependencies for BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC to arch/*/Kconfig. While we are at it, fixed several obvious cases when BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h are *not* going to have floppy.c compile, let alone work). If you can come up with better name for that ("this architecture might have working PC-compatible floppy disk controller"), you are more than welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch below... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * | | Merge master.kernel.org:/home/rmk/linux-2.6-arm Linus Torvalds2005-09-07
| |\ \ \
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-21 20:41:08 -0400