diff options
Diffstat (limited to 'drivers')
71 files changed, 2167 insertions, 1503 deletions
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index e7347db5b6c..b663b7ffae4 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c | |||
@@ -45,8 +45,6 @@ static const struct portinfo pata_icside_portinfo_v6_2 = { | |||
45 | .stepping = 6, | 45 | .stepping = 6, |
46 | }; | 46 | }; |
47 | 47 | ||
48 | #define PATA_ICSIDE_MAX_SG 128 | ||
49 | |||
50 | struct pata_icside_state { | 48 | struct pata_icside_state { |
51 | void __iomem *irq_port; | 49 | void __iomem *irq_port; |
52 | void __iomem *ioc_base; | 50 | void __iomem *ioc_base; |
@@ -57,7 +55,6 @@ struct pata_icside_state { | |||
57 | u8 disabled; | 55 | u8 disabled; |
58 | unsigned int speed[ATA_MAX_DEVICES]; | 56 | unsigned int speed[ATA_MAX_DEVICES]; |
59 | } port[2]; | 57 | } port[2]; |
60 | struct scatterlist sg[PATA_ICSIDE_MAX_SG]; | ||
61 | }; | 58 | }; |
62 | 59 | ||
63 | struct pata_icside_info { | 60 | struct pata_icside_info { |
@@ -222,9 +219,7 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) | |||
222 | { | 219 | { |
223 | struct ata_port *ap = qc->ap; | 220 | struct ata_port *ap = qc->ap; |
224 | struct pata_icside_state *state = ap->host->private_data; | 221 | struct pata_icside_state *state = ap->host->private_data; |
225 | struct scatterlist *sg, *rsg = state->sg; | ||
226 | unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; | 222 | unsigned int write = qc->tf.flags & ATA_TFLAG_WRITE; |
227 | unsigned int si; | ||
228 | 223 | ||
229 | /* | 224 | /* |
230 | * We are simplex; BUG if we try to fiddle with DMA | 225 | * We are simplex; BUG if we try to fiddle with DMA |
@@ -233,20 +228,12 @@ static void pata_icside_bmdma_setup(struct ata_queued_cmd *qc) | |||
233 | BUG_ON(dma_channel_active(state->dma)); | 228 | BUG_ON(dma_channel_active(state->dma)); |
234 | 229 | ||
235 | /* | 230 | /* |
236 | * Copy ATAs scattered sg list into a contiguous array of sg | ||
237 | */ | ||
238 | for_each_sg(qc->sg, sg, qc->n_elem, si) { | ||
239 | memcpy(rsg, sg, sizeof(*sg)); | ||
240 | rsg++; | ||
241 | } | ||
242 | |||
243 | /* | ||
244 | * Route the DMA signals to the correct interface | 231 | * Route the DMA signals to the correct interface |
245 | */ | 232 | */ |
246 | writeb(state->port[ap->port_no].port_sel, state->ioc_base); | 233 | writeb(state->port[ap->port_no].port_sel, state->ioc_base); |
247 | 234 | ||
248 | set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); | 235 | set_dma_speed(state->dma, state->port[ap->port_no].speed[qc->dev->devno]); |
249 | set_dma_sg(state->dma, state->sg, rsg - state->sg); | 236 | set_dma_sg(state->dma, qc->sg, qc->n_elem); |
250 | set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); | 237 | set_dma_mode(state->dma, write ? DMA_MODE_WRITE : DMA_MODE_READ); |
251 | 238 | ||
252 | /* issue r/w command */ | 239 | /* issue r/w command */ |
@@ -306,8 +293,8 @@ static int icside_dma_init(struct pata_icside_info *info) | |||
306 | 293 | ||
307 | static struct scsi_host_template pata_icside_sht = { | 294 | static struct scsi_host_template pata_icside_sht = { |
308 | ATA_BASE_SHT(DRV_NAME), | 295 | ATA_BASE_SHT(DRV_NAME), |
309 | .sg_tablesize = PATA_ICSIDE_MAX_SG, | 296 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
310 | .dma_boundary = ~0, /* no dma boundaries */ | 297 | .dma_boundary = IOMD_DMA_BOUNDARY, |
311 | }; | 298 | }; |
312 | 299 | ||
313 | static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) | 300 | static void pata_icside_postreset(struct ata_link *link, unsigned int *classes) |
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index ba68a4671cb..538313f9e7a 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c | |||
@@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) | |||
102 | return -EBUSY; | 102 | return -EBUSY; |
103 | 103 | ||
104 | if (cpu_is_omap24xx()) { | 104 | if (cpu_is_omap24xx()) { |
105 | rng_ick = clk_get(&pdev->dev, "rng_ick"); | 105 | rng_ick = clk_get(&pdev->dev, "ick"); |
106 | if (IS_ERR(rng_ick)) { | 106 | if (IS_ERR(rng_ick)) { |
107 | dev_err(&pdev->dev, "Could not get rng_ick\n"); | 107 | dev_err(&pdev->dev, "Could not get rng_ick\n"); |
108 | ret = PTR_ERR(rng_ick); | 108 | ret = PTR_ERR(rng_ick); |
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c index ae50a9d1a4e..da781d10789 100644 --- a/drivers/dma/ipu/ipu_idmac.c +++ b/drivers/dma/ipu/ipu_idmac.c | |||
@@ -1649,7 +1649,7 @@ static int ipu_probe(struct platform_device *pdev) | |||
1649 | } | 1649 | } |
1650 | 1650 | ||
1651 | /* Get IPU clock */ | 1651 | /* Get IPU clock */ |
1652 | ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk"); | 1652 | ipu_data.ipu_clk = clk_get(&pdev->dev, NULL); |
1653 | if (IS_ERR(ipu_data.ipu_clk)) { | 1653 | if (IS_ERR(ipu_data.ipu_clk)) { |
1654 | ret = PTR_ERR(ipu_data.ipu_clk); | 1654 | ret = PTR_ERR(ipu_data.ipu_clk); |
1655 | goto err_clk_get; | 1655 | goto err_clk_get; |
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 9aefb5e5864..86796488ef4 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c | |||
@@ -15,9 +15,9 @@ | |||
15 | #include <linux/init.h> | 15 | #include <linux/init.h> |
16 | #include <linux/i2c.h> | 16 | #include <linux/i2c.h> |
17 | #include <linux/i2c-algo-bit.h> | 17 | #include <linux/i2c-algo-bit.h> |
18 | #include <linux/io.h> | ||
18 | 19 | ||
19 | #include <mach/hardware.h> | 20 | #include <mach/hardware.h> |
20 | #include <asm/io.h> | ||
21 | #include <asm/hardware/ioc.h> | 21 | #include <asm/hardware/ioc.h> |
22 | #include <asm/system.h> | 22 | #include <asm/system.h> |
23 | 23 | ||
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index be8ee2cac8b..ece0125a1ee 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c | |||
@@ -193,22 +193,24 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) | |||
193 | 193 | ||
194 | static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) | 194 | static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) |
195 | { | 195 | { |
196 | if (cpu_is_omap16xx() || cpu_class_is_omap2()) { | 196 | int ret; |
197 | dev->iclk = clk_get(dev->dev, "i2c_ick"); | 197 | |
198 | if (IS_ERR(dev->iclk)) { | 198 | dev->iclk = clk_get(dev->dev, "ick"); |
199 | dev->iclk = NULL; | 199 | if (IS_ERR(dev->iclk)) { |
200 | return -ENODEV; | 200 | ret = PTR_ERR(dev->iclk); |
201 | } | 201 | dev->iclk = NULL; |
202 | return ret; | ||
202 | } | 203 | } |
203 | 204 | ||
204 | dev->fclk = clk_get(dev->dev, "i2c_fck"); | 205 | dev->fclk = clk_get(dev->dev, "fck"); |
205 | if (IS_ERR(dev->fclk)) { | 206 | if (IS_ERR(dev->fclk)) { |
207 | ret = PTR_ERR(dev->fclk); | ||
206 | if (dev->iclk != NULL) { | 208 | if (dev->iclk != NULL) { |
207 | clk_put(dev->iclk); | 209 | clk_put(dev->iclk); |
208 | dev->iclk = NULL; | 210 | dev->iclk = NULL; |
209 | } | 211 | } |
210 | dev->fclk = NULL; | 212 | dev->fclk = NULL; |
211 | return -ENODEV; | 213 | return ret; |
212 | } | 214 | } |
213 | 215 | ||
214 | return 0; | 216 | return 0; |
@@ -218,18 +220,15 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) | |||
218 | { | 220 | { |
219 | clk_put(dev->fclk); | 221 | clk_put(dev->fclk); |
220 | dev->fclk = NULL; | 222 | dev->fclk = NULL; |
221 | if (dev->iclk != NULL) { | 223 | clk_put(dev->iclk); |
222 | clk_put(dev->iclk); | 224 | dev->iclk = NULL; |
223 | dev->iclk = NULL; | ||
224 | } | ||
225 | } | 225 | } |
226 | 226 | ||
227 | static void omap_i2c_unidle(struct omap_i2c_dev *dev) | 227 | static void omap_i2c_unidle(struct omap_i2c_dev *dev) |
228 | { | 228 | { |
229 | WARN_ON(!dev->idle); | 229 | WARN_ON(!dev->idle); |
230 | 230 | ||
231 | if (dev->iclk != NULL) | 231 | clk_enable(dev->iclk); |
232 | clk_enable(dev->iclk); | ||
233 | clk_enable(dev->fclk); | 232 | clk_enable(dev->fclk); |
234 | dev->idle = 0; | 233 | dev->idle = 0; |
235 | if (dev->iestate) | 234 | if (dev->iestate) |
@@ -254,8 +253,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) | |||
254 | } | 253 | } |
255 | dev->idle = 1; | 254 | dev->idle = 1; |
256 | clk_disable(dev->fclk); | 255 | clk_disable(dev->fclk); |
257 | if (dev->iclk != NULL) | 256 | clk_disable(dev->iclk); |
258 | clk_disable(dev->iclk); | ||
259 | } | 257 | } |
260 | 258 | ||
261 | static int omap_i2c_init(struct omap_i2c_dev *dev) | 259 | static int omap_i2c_init(struct omap_i2c_dev *dev) |
@@ -312,15 +310,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) | |||
312 | omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); | 310 | omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); |
313 | 311 | ||
314 | if (cpu_class_is_omap1()) { | 312 | if (cpu_class_is_omap1()) { |
315 | struct clk *armxor_ck; | 313 | /* |
316 | 314 | * The I2C functional clock is the armxor_ck, so there's | |
317 | armxor_ck = clk_get(NULL, "armxor_ck"); | 315 | * no need to get "armxor_ck" separately. Now, if OMAP2420 |
318 | if (IS_ERR(armxor_ck)) | 316 | * always returns 12MHz for the functional clock, we can |
319 | dev_warn(dev->dev, "Could not get armxor_ck\n"); | 317 | * do this bit unconditionally. |
320 | else { | 318 | */ |
321 | fclk_rate = clk_get_rate(armxor_ck); | 319 | fclk_rate = clk_get_rate(dev->fclk); |
322 | clk_put(armxor_ck); | 320 | |
323 | } | ||
324 | /* TRM for 5912 says the I2C clock must be prescaled to be | 321 | /* TRM for 5912 says the I2C clock must be prescaled to be |
325 | * between 7 - 12 MHz. The XOR input clock is typically | 322 | * between 7 - 12 MHz. The XOR input clock is typically |
326 | * 12, 13 or 19.2 MHz. So we should have code that produces: | 323 | * 12, 13 or 19.2 MHz. So we should have code that produces: |
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 4678babd3ce..fede619ba22 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c | |||
@@ -102,7 +102,13 @@ static int i2c_versatile_probe(struct platform_device *dev) | |||
102 | i2c->algo = i2c_versatile_algo; | 102 | i2c->algo = i2c_versatile_algo; |
103 | i2c->algo.data = i2c; | 103 | i2c->algo.data = i2c; |
104 | 104 | ||
105 | ret = i2c_bit_add_bus(&i2c->adap); | 105 | if (dev->id >= 0) { |
106 | /* static bus numbering */ | ||
107 | i2c->adap.nr = dev->id; | ||
108 | ret = i2c_bit_add_numbered_bus(&i2c->adap); | ||
109 | } else | ||
110 | /* dynamic bus numbering */ | ||
111 | ret = i2c_bit_add_bus(&i2c->adap); | ||
106 | if (ret >= 0) { | 112 | if (ret >= 0) { |
107 | platform_set_drvdata(dev, i2c); | 113 | platform_set_drvdata(dev, i2c); |
108 | return 0; | 114 | return 0; |
@@ -146,7 +152,7 @@ static void __exit i2c_versatile_exit(void) | |||
146 | platform_driver_unregister(&i2c_versatile_driver); | 152 | platform_driver_unregister(&i2c_versatile_driver); |
147 | } | 153 | } |
148 | 154 | ||
149 | module_init(i2c_versatile_init); | 155 | subsys_initcall(i2c_versatile_init); |
150 | module_exit(i2c_versatile_exit); | 156 | module_exit(i2c_versatile_exit); |
151 | 157 | ||
152 | MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); | 158 | MODULE_DESCRIPTION("ARM Versatile I2C bus driver"); |
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c index abb04c82c62..634af6a8e6b 100644 --- a/drivers/input/keyboard/corgikbd.c +++ b/drivers/input/keyboard/corgikbd.c | |||
@@ -21,8 +21,6 @@ | |||
21 | #include <linux/slab.h> | 21 | #include <linux/slab.h> |
22 | 22 | ||
23 | #include <mach/corgi.h> | 23 | #include <mach/corgi.h> |
24 | #include <mach/hardware.h> | ||
25 | #include <mach/pxa-regs.h> | ||
26 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
27 | #include <asm/hardware/scoop.h> | 25 | #include <asm/hardware/scoop.h> |
28 | 26 | ||
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c index 9d1781a618e..13967422658 100644 --- a/drivers/input/keyboard/spitzkbd.c +++ b/drivers/input/keyboard/spitzkbd.c | |||
@@ -21,8 +21,6 @@ | |||
21 | #include <linux/slab.h> | 21 | #include <linux/slab.h> |
22 | 22 | ||
23 | #include <mach/spitz.h> | 23 | #include <mach/spitz.h> |
24 | #include <mach/hardware.h> | ||
25 | #include <mach/pxa-regs.h> | ||
26 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
27 | 25 | ||
28 | #define KB_ROWS 7 | 26 | #define KB_ROWS 7 |
diff --git a/drivers/input/mouse/rpcmouse.c b/drivers/input/mouse/rpcmouse.c index 56c079ef501..272deddc8db 100644 --- a/drivers/input/mouse/rpcmouse.c +++ b/drivers/input/mouse/rpcmouse.c | |||
@@ -22,10 +22,10 @@ | |||
22 | #include <linux/interrupt.h> | 22 | #include <linux/interrupt.h> |
23 | #include <linux/init.h> | 23 | #include <linux/init.h> |
24 | #include <linux/input.h> | 24 | #include <linux/input.h> |
25 | #include <linux/io.h> | ||
25 | 26 | ||
26 | #include <mach/hardware.h> | 27 | #include <mach/hardware.h> |
27 | #include <asm/irq.h> | 28 | #include <asm/irq.h> |
28 | #include <asm/io.h> | ||
29 | #include <asm/hardware/iomd.h> | 29 | #include <asm/hardware/iomd.h> |
30 | 30 | ||
31 | MODULE_AUTHOR("Vojtech Pavlik, Russell King"); | 31 | MODULE_AUTHOR("Vojtech Pavlik, Russell King"); |
diff --git a/drivers/input/serio/rpckbd.c b/drivers/input/serio/rpckbd.c index 7f36edd34f8..ed045c99f84 100644 --- a/drivers/input/serio/rpckbd.c +++ b/drivers/input/serio/rpckbd.c | |||
@@ -33,10 +33,10 @@ | |||
33 | #include <linux/serio.h> | 33 | #include <linux/serio.h> |
34 | #include <linux/err.h> | 34 | #include <linux/err.h> |
35 | #include <linux/platform_device.h> | 35 | #include <linux/platform_device.h> |
36 | #include <linux/io.h> | ||
36 | 37 | ||
37 | #include <asm/irq.h> | 38 | #include <asm/irq.h> |
38 | #include <mach/hardware.h> | 39 | #include <mach/hardware.h> |
39 | #include <asm/io.h> | ||
40 | #include <asm/hardware/iomd.h> | 40 | #include <asm/hardware/iomd.h> |
41 | #include <asm/system.h> | 41 | #include <asm/system.h> |
42 | 42 | ||
diff --git a/drivers/input/touchscreen/corgi_ts.c b/drivers/input/touchscreen/corgi_ts.c index 3fb51b54fe6..94a1919d439 100644 --- a/drivers/input/touchscreen/corgi_ts.c +++ b/drivers/input/touchscreen/corgi_ts.c | |||
@@ -21,7 +21,6 @@ | |||
21 | 21 | ||
22 | #include <mach/sharpsl.h> | 22 | #include <mach/sharpsl.h> |
23 | #include <mach/hardware.h> | 23 | #include <mach/hardware.h> |
24 | #include <mach/pxa-regs.h> | ||
25 | #include <mach/pxa2xx-gpio.h> | 24 | #include <mach/pxa2xx-gpio.h> |
26 | 25 | ||
27 | 26 | ||
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c index 73eb656acfe..805faaea644 100644 --- a/drivers/media/video/omap24xxcam.c +++ b/drivers/media/video/omap24xxcam.c | |||
@@ -80,17 +80,17 @@ static int omap24xxcam_clock_get(struct omap24xxcam_device *cam) | |||
80 | { | 80 | { |
81 | int rval = 0; | 81 | int rval = 0; |
82 | 82 | ||
83 | cam->fck = clk_get(cam->dev, "cam_fck"); | 83 | cam->fck = clk_get(cam->dev, "fck"); |
84 | if (IS_ERR(cam->fck)) { | 84 | if (IS_ERR(cam->fck)) { |
85 | dev_err(cam->dev, "can't get cam_fck"); | 85 | dev_err(cam->dev, "can't get camera fck"); |
86 | rval = PTR_ERR(cam->fck); | 86 | rval = PTR_ERR(cam->fck); |
87 | omap24xxcam_clock_put(cam); | 87 | omap24xxcam_clock_put(cam); |
88 | return rval; | 88 | return rval; |
89 | } | 89 | } |
90 | 90 | ||
91 | cam->ick = clk_get(cam->dev, "cam_ick"); | 91 | cam->ick = clk_get(cam->dev, "ick"); |
92 | if (IS_ERR(cam->ick)) { | 92 | if (IS_ERR(cam->ick)) { |
93 | dev_err(cam->dev, "can't get cam_ick"); | 93 | dev_err(cam->dev, "can't get camera ick"); |
94 | rval = PTR_ERR(cam->ick); | 94 | rval = PTR_ERR(cam->ick); |
95 | omap24xxcam_clock_put(cam); | 95 | omap24xxcam_clock_put(cam); |
96 | } | 96 | } |
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 07c334f25aa..0c4ce58c53d 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c | |||
@@ -35,7 +35,6 @@ | |||
35 | #include <linux/videodev2.h> | 35 | #include <linux/videodev2.h> |
36 | 36 | ||
37 | #include <mach/dma.h> | 37 | #include <mach/dma.h> |
38 | #include <mach/pxa-regs.h> | ||
39 | #include <mach/camera.h> | 38 | #include <mach/camera.h> |
40 | 39 | ||
41 | #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) | 40 | #define PXA_CAM_VERSION_CODE KERNEL_VERSION(0, 0, 5) |
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2909bbc8ad0..a663429b3d5 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c | |||
@@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) | |||
490 | mod_timer(&host->timer, jiffies + HZ); | 490 | mod_timer(&host->timer, jiffies + HZ); |
491 | } | 491 | } |
492 | 492 | ||
493 | static int mmci_probe(struct amba_device *dev, void *id) | 493 | static int __devinit mmci_probe(struct amba_device *dev, void *id) |
494 | { | 494 | { |
495 | struct mmc_platform_data *plat = dev->dev.platform_data; | 495 | struct mmc_platform_data *plat = dev->dev.platform_data; |
496 | struct mmci_host *host; | 496 | struct mmci_host *host; |
@@ -633,7 +633,7 @@ static int mmci_probe(struct amba_device *dev, void *id) | |||
633 | return ret; | 633 | return ret; |
634 | } | 634 | } |
635 | 635 | ||
636 | static int mmci_remove(struct amba_device *dev) | 636 | static int __devexit mmci_remove(struct amba_device *dev) |
637 | { | 637 | { |
638 | struct mmc_host *mmc = amba_get_drvdata(dev); | 638 | struct mmc_host *mmc = amba_get_drvdata(dev); |
639 | 639 | ||
@@ -730,7 +730,7 @@ static struct amba_driver mmci_driver = { | |||
730 | .name = DRIVER_NAME, | 730 | .name = DRIVER_NAME, |
731 | }, | 731 | }, |
732 | .probe = mmci_probe, | 732 | .probe = mmci_probe, |
733 | .remove = mmci_remove, | 733 | .remove = __devexit_p(mmci_remove), |
734 | .suspend = mmci_suspend, | 734 | .suspend = mmci_suspend, |
735 | .resume = mmci_resume, | 735 | .resume = mmci_resume, |
736 | .id_table = mmci_ids, | 736 | .id_table = mmci_ids, |
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index dda0be4e25d..b4a615c55f2 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c | |||
@@ -42,7 +42,7 @@ | |||
42 | #define HAS_DMA | 42 | #define HAS_DMA |
43 | #endif | 43 | #endif |
44 | 44 | ||
45 | #define DRIVER_NAME "imx-mmc" | 45 | #define DRIVER_NAME "mxc-mmc" |
46 | 46 | ||
47 | #define MMC_REG_STR_STP_CLK 0x00 | 47 | #define MMC_REG_STR_STP_CLK 0x00 |
48 | #define MMC_REG_STATUS 0x04 | 48 | #define MMC_REG_STATUS 0x04 |
@@ -707,7 +707,7 @@ static int mxcmci_probe(struct platform_device *pdev) | |||
707 | host->res = r; | 707 | host->res = r; |
708 | host->irq = irq; | 708 | host->irq = irq; |
709 | 709 | ||
710 | host->clk = clk_get(&pdev->dev, "sdhc_clk"); | 710 | host->clk = clk_get(&pdev->dev, NULL); |
711 | if (IS_ERR(host->clk)) { | 711 | if (IS_ERR(host->clk)) { |
712 | ret = PTR_ERR(host->clk); | 712 | ret = PTR_ERR(host->clk); |
713 | goto out_iounmap; | 713 | goto out_iounmap; |
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 67d7b7fef08..5570849188c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c | |||
@@ -1460,18 +1460,12 @@ static int __init mmc_omap_probe(struct platform_device *pdev) | |||
1460 | if (!host->virt_base) | 1460 | if (!host->virt_base) |
1461 | goto err_ioremap; | 1461 | goto err_ioremap; |
1462 | 1462 | ||
1463 | if (cpu_is_omap24xx()) { | 1463 | host->iclk = clk_get(&pdev->dev, "ick"); |
1464 | host->iclk = clk_get(&pdev->dev, "mmc_ick"); | 1464 | if (IS_ERR(host->iclk)) |
1465 | if (IS_ERR(host->iclk)) | 1465 | goto err_free_mmc_host; |
1466 | goto err_free_mmc_host; | 1466 | clk_enable(host->iclk); |
1467 | clk_enable(host->iclk); | ||
1468 | } | ||
1469 | |||
1470 | if (!cpu_is_omap24xx()) | ||
1471 | host->fclk = clk_get(&pdev->dev, "mmc_ck"); | ||
1472 | else | ||
1473 | host->fclk = clk_get(&pdev->dev, "mmc_fck"); | ||
1474 | 1467 | ||
1468 | host->fclk = clk_get(&pdev->dev, "fck"); | ||
1475 | if (IS_ERR(host->fclk)) { | 1469 | if (IS_ERR(host->fclk)) { |
1476 | ret = PTR_ERR(host->fclk); | 1470 | ret = PTR_ERR(host->fclk); |
1477 | goto err_free_iclk; | 1471 | goto err_free_iclk; |
@@ -1536,10 +1530,10 @@ static int mmc_omap_remove(struct platform_device *pdev) | |||
1536 | if (host->pdata->cleanup) | 1530 | if (host->pdata->cleanup) |
1537 | host->pdata->cleanup(&pdev->dev); | 1531 | host->pdata->cleanup(&pdev->dev); |
1538 | 1532 | ||
1539 | if (host->iclk && !IS_ERR(host->iclk)) | 1533 | mmc_omap_fclk_enable(host, 0); |
1540 | clk_put(host->iclk); | 1534 | clk_put(host->fclk); |
1541 | if (host->fclk && !IS_ERR(host->fclk)) | 1535 | clk_disable(host->iclk); |
1542 | clk_put(host->fclk); | 1536 | clk_put(host->iclk); |
1543 | 1537 | ||
1544 | iounmap(host->virt_base); | 1538 | iounmap(host->virt_base); |
1545 | release_mem_region(pdev->resource[0].start, | 1539 | release_mem_region(pdev->resource[0].start, |
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index a631c81dce1..3916a5618e2 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c | |||
@@ -956,13 +956,13 @@ static int __init omap_mmc_probe(struct platform_device *pdev) | |||
956 | 956 | ||
957 | sema_init(&host->sem, 1); | 957 | sema_init(&host->sem, 1); |
958 | 958 | ||
959 | host->iclk = clk_get(&pdev->dev, "mmchs_ick"); | 959 | host->iclk = clk_get(&pdev->dev, "ick"); |
960 | if (IS_ERR(host->iclk)) { | 960 | if (IS_ERR(host->iclk)) { |
961 | ret = PTR_ERR(host->iclk); | 961 | ret = PTR_ERR(host->iclk); |
962 | host->iclk = NULL; | 962 | host->iclk = NULL; |
963 | goto err1; | 963 | goto err1; |
964 | } | 964 | } |
965 | host->fclk = clk_get(&pdev->dev, "mmchs_fck"); | 965 | host->fclk = clk_get(&pdev->dev, "fck"); |
966 | if (IS_ERR(host->fclk)) { | 966 | if (IS_ERR(host->fclk)) { |
967 | ret = PTR_ERR(host->fclk); | 967 | ret = PTR_ERR(host->fclk); |
968 | host->fclk = NULL; | 968 | host->fclk = NULL; |
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 9702ad3774c..430095725f9 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c | |||
@@ -30,9 +30,8 @@ | |||
30 | 30 | ||
31 | #include <asm/sizes.h> | 31 | #include <asm/sizes.h> |
32 | 32 | ||
33 | #include <mach/dma.h> | ||
34 | #include <mach/hardware.h> | 33 | #include <mach/hardware.h> |
35 | #include <mach/pxa-regs.h> | 34 | #include <mach/dma.h> |
36 | #include <mach/mmc.h> | 35 | #include <mach/mmc.h> |
37 | 36 | ||
38 | #include "pxamci.h" | 37 | #include "pxamci.h" |
diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index d2ec262666c..c9681a339a5 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c | |||
@@ -31,6 +31,7 @@ | |||
31 | #include <linux/ioport.h> | 31 | #include <linux/ioport.h> |
32 | #include <linux/platform_device.h> | 32 | #include <linux/platform_device.h> |
33 | #include <linux/init.h> | 33 | #include <linux/init.h> |
34 | #include <linux/io.h> | ||
34 | 35 | ||
35 | #include <linux/mtd/mtd.h> | 36 | #include <linux/mtd/mtd.h> |
36 | #include <linux/mtd/map.h> | 37 | #include <linux/mtd/map.h> |
@@ -38,7 +39,6 @@ | |||
38 | 39 | ||
39 | #include <asm/mach/flash.h> | 40 | #include <asm/mach/flash.h> |
40 | #include <mach/hardware.h> | 41 | #include <mach/hardware.h> |
41 | #include <asm/io.h> | ||
42 | #include <asm/system.h> | 42 | #include <asm/system.h> |
43 | 43 | ||
44 | #ifdef CONFIG_ARCH_P720T | 44 | #ifdef CONFIG_ARCH_P720T |
diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 6f6a0f6dafd..8f57b6f40aa 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c | |||
@@ -12,6 +12,7 @@ | |||
12 | #include <linux/slab.h> | 12 | #include <linux/slab.h> |
13 | #include <linux/platform_device.h> | 13 | #include <linux/platform_device.h> |
14 | #include <linux/err.h> | 14 | #include <linux/err.h> |
15 | #include <linux/io.h> | ||
15 | 16 | ||
16 | #include <linux/mtd/mtd.h> | 17 | #include <linux/mtd/mtd.h> |
17 | #include <linux/mtd/map.h> | 18 | #include <linux/mtd/map.h> |
@@ -19,7 +20,6 @@ | |||
19 | #include <linux/mtd/concat.h> | 20 | #include <linux/mtd/concat.h> |
20 | 21 | ||
21 | #include <mach/hardware.h> | 22 | #include <mach/hardware.h> |
22 | #include <asm/io.h> | ||
23 | #include <asm/sizes.h> | 23 | #include <asm/sizes.h> |
24 | #include <asm/mach/flash.h> | 24 | #include <asm/mach/flash.h> |
25 | 25 | ||
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index fa129c09bca..10081e656a6 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c | |||
@@ -26,8 +26,7 @@ | |||
26 | #include <asm/irq.h> | 26 | #include <asm/irq.h> |
27 | #include <asm/mach-types.h> | 27 | #include <asm/mach-types.h> |
28 | 28 | ||
29 | #include <mach/hardware.h> | 29 | #include <mach/pxa2xx-regs.h> |
30 | #include <mach/pxa-regs.h> | ||
31 | 30 | ||
32 | #define GPIO_NAND_CS (11) | 31 | #define GPIO_NAND_CS (11) |
33 | #define GPIO_NAND_RB (89) | 32 | #define GPIO_NAND_RB (89) |
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 21fd4f1c480..bad048aca89 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c | |||
@@ -880,7 +880,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) | |||
880 | this->read_buf = mxc_nand_read_buf; | 880 | this->read_buf = mxc_nand_read_buf; |
881 | this->verify_buf = mxc_nand_verify_buf; | 881 | this->verify_buf = mxc_nand_verify_buf; |
882 | 882 | ||
883 | host->clk = clk_get(&pdev->dev, "nfc_clk"); | 883 | host->clk = clk_get(&pdev->dev, "nfc"); |
884 | if (IS_ERR(host->clk)) | 884 | if (IS_ERR(host->clk)) |
885 | goto eclk; | 885 | goto eclk; |
886 | 886 | ||
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index cc55cbc2b30..61b69cc4000 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c | |||
@@ -22,7 +22,6 @@ | |||
22 | #include <linux/irq.h> | 22 | #include <linux/irq.h> |
23 | 23 | ||
24 | #include <mach/dma.h> | 24 | #include <mach/dma.h> |
25 | #include <mach/pxa-regs.h> | ||
26 | #include <mach/pxa3xx_nand.h> | 25 | #include <mach/pxa3xx_nand.h> |
27 | 26 | ||
28 | #define CHIP_DELAY_TIMEOUT (2 * HZ/10) | 27 | #define CHIP_DELAY_TIMEOUT (2 * HZ/10) |
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index c2d012fcc29..4bc6901b381 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c | |||
@@ -27,9 +27,9 @@ | |||
27 | #include <linux/crc32.h> | 27 | #include <linux/crc32.h> |
28 | #include <linux/bitops.h> | 28 | #include <linux/bitops.h> |
29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
30 | #include <linux/io.h> | ||
30 | 31 | ||
31 | #include <mach/hardware.h> | 32 | #include <mach/hardware.h> |
32 | #include <asm/io.h> | ||
33 | #include <asm/system.h> | 33 | #include <asm/system.h> |
34 | 34 | ||
35 | #define TX_BUFFERS 15 | 35 | #define TX_BUFFERS 15 |
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c index 5fe17d5eaa5..448487e22fa 100644 --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c | |||
@@ -335,11 +335,20 @@ static int ixp4xx_mdio_register(void) | |||
335 | if (!(mdio_bus = mdiobus_alloc())) | 335 | if (!(mdio_bus = mdiobus_alloc())) |
336 | return -ENOMEM; | 336 | return -ENOMEM; |
337 | 337 | ||
338 | /* All MII PHY accesses use NPE-B Ethernet registers */ | 338 | if (cpu_is_ixp43x()) { |
339 | spin_lock_init(&mdio_lock); | 339 | /* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */ |
340 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | 340 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH)) |
341 | __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); | 341 | return -ENOSYS; |
342 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT; | ||
343 | } else { | ||
344 | /* All MII PHY accesses use NPE-B Ethernet registers */ | ||
345 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) | ||
346 | return -ENOSYS; | ||
347 | mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT; | ||
348 | } | ||
342 | 349 | ||
350 | __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control); | ||
351 | spin_lock_init(&mdio_lock); | ||
343 | mdio_bus->name = "IXP4xx MII Bus"; | 352 | mdio_bus->name = "IXP4xx MII Bus"; |
344 | mdio_bus->read = &ixp4xx_mdio_read; | 353 | mdio_bus->read = &ixp4xx_mdio_read; |
345 | mdio_bus->write = &ixp4xx_mdio_write; | 354 | mdio_bus->write = &ixp4xx_mdio_write; |
@@ -1250,9 +1259,6 @@ static struct platform_driver ixp4xx_eth_driver = { | |||
1250 | static int __init eth_init_module(void) | 1259 | static int __init eth_init_module(void) |
1251 | { | 1260 | { |
1252 | int err; | 1261 | int err; |
1253 | if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0)) | ||
1254 | return -ENOSYS; | ||
1255 | |||
1256 | if ((err = ixp4xx_mdio_register())) | 1262 | if ((err = ixp4xx_mdio_register())) |
1257 | return err; | 1263 | return err; |
1258 | return platform_driver_register(&ixp4xx_eth_driver); | 1264 | return platform_driver_register(&ixp4xx_eth_driver); |
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c index 31794c2363e..e775338b525 100644 --- a/drivers/net/irda/pxaficp_ir.c +++ b/drivers/net/irda/pxaficp_ir.c | |||
@@ -24,9 +24,8 @@ | |||
24 | 24 | ||
25 | #include <mach/dma.h> | 25 | #include <mach/dma.h> |
26 | #include <mach/irda.h> | 26 | #include <mach/irda.h> |
27 | #include <mach/hardware.h> | ||
28 | #include <mach/pxa-regs.h> | ||
29 | #include <mach/regs-uart.h> | 27 | #include <mach/regs-uart.h> |
28 | #include <mach/regs-ost.h> | ||
30 | 29 | ||
31 | #define FICP __REG(0x40800000) /* Start of FICP area */ | 30 | #define FICP __REG(0x40800000) /* Start of FICP area */ |
32 | #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ | 31 | #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ |
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h index a45952e7201..8140f7cb4d8 100644 --- a/drivers/net/smc911x.h +++ b/drivers/net/smc911x.h | |||
@@ -236,8 +236,7 @@ static inline void SMC_outsl(struct smc911x_local *lp, int reg, | |||
236 | * Use a DMA for RX and TX packets. | 236 | * Use a DMA for RX and TX packets. |
237 | */ | 237 | */ |
238 | #include <linux/dma-mapping.h> | 238 | #include <linux/dma-mapping.h> |
239 | #include <asm/dma.h> | 239 | #include <mach/dma.h> |
240 | #include <mach/pxa-regs.h> | ||
241 | 240 | ||
242 | static dma_addr_t rx_dmabuf, tx_dmabuf; | 241 | static dma_addr_t rx_dmabuf, tx_dmabuf; |
243 | static int rx_dmalen, tx_dmalen; | 242 | static int rx_dmalen, tx_dmalen; |
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index ed9ae43523a..6c44f86ae3f 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h | |||
@@ -44,6 +44,7 @@ | |||
44 | defined(CONFIG_MACH_MAINSTONE) ||\ | 44 | defined(CONFIG_MACH_MAINSTONE) ||\ |
45 | defined(CONFIG_MACH_ZYLONITE) ||\ | 45 | defined(CONFIG_MACH_ZYLONITE) ||\ |
46 | defined(CONFIG_MACH_LITTLETON) ||\ | 46 | defined(CONFIG_MACH_LITTLETON) ||\ |
47 | defined(CONFIG_MACH_ZYLONITE2) ||\ | ||
47 | defined(CONFIG_ARCH_VIPER) | 48 | defined(CONFIG_ARCH_VIPER) |
48 | 49 | ||
49 | #include <asm/mach-types.h> | 50 | #include <asm/mach-types.h> |
@@ -494,8 +495,6 @@ struct smc_local { | |||
494 | */ | 495 | */ |
495 | #include <linux/dma-mapping.h> | 496 | #include <linux/dma-mapping.h> |
496 | #include <mach/dma.h> | 497 | #include <mach/dma.h> |
497 | #include <mach/hardware.h> | ||
498 | #include <mach/pxa-regs.h> | ||
499 | 498 | ||
500 | #ifdef SMC_insl | 499 | #ifdef SMC_insl |
501 | #undef SMC_insl | 500 | #undef SMC_insl |
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index bb9ddb9532e..c49a7269f6d 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c | |||
@@ -28,7 +28,6 @@ | |||
28 | #include <asm/io.h> | 28 | #include <asm/io.h> |
29 | #include <asm/irq.h> | 29 | #include <asm/irq.h> |
30 | #include <asm/system.h> | 30 | #include <asm/system.h> |
31 | #include <mach/pxa-regs.h> | ||
32 | #include <mach/pxa2xx-regs.h> | 31 | #include <mach/pxa2xx-regs.h> |
33 | #include <asm/mach-types.h> | 32 | #include <asm/mach-types.h> |
34 | 33 | ||
@@ -39,6 +38,44 @@ | |||
39 | #include "soc_common.h" | 38 | #include "soc_common.h" |
40 | #include "pxa2xx_base.h" | 39 | #include "pxa2xx_base.h" |
41 | 40 | ||
41 | /* | ||
42 | * Personal Computer Memory Card International Association (PCMCIA) sockets | ||
43 | */ | ||
44 | |||
45 | #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ | ||
46 | #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ | ||
47 | #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ | ||
48 | #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ | ||
49 | #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ | ||
50 | |||
51 | #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ | ||
52 | #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ | ||
53 | #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ | ||
54 | #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ | ||
55 | |||
56 | #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ | ||
57 | #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ | ||
58 | #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ | ||
59 | #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ | ||
60 | |||
61 | #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ | ||
62 | (0x20000000 + (Nb) * PCMCIASp) | ||
63 | #define _PCMCIAIO(Nb) _PCMCIA(Nb) /* PCMCIA I/O [0..1] */ | ||
64 | #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ | ||
65 | (_PCMCIA(Nb) + 2 * PCMCIAPrtSp) | ||
66 | #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ | ||
67 | (_PCMCIA(Nb) + 3 * PCMCIAPrtSp) | ||
68 | |||
69 | #define _PCMCIA0 _PCMCIA(0) /* PCMCIA 0 */ | ||
70 | #define _PCMCIA0IO _PCMCIAIO(0) /* PCMCIA 0 I/O */ | ||
71 | #define _PCMCIA0Attr _PCMCIAAttr(0) /* PCMCIA 0 Attribute */ | ||
72 | #define _PCMCIA0Mem _PCMCIAMem(0) /* PCMCIA 0 Memory */ | ||
73 | |||
74 | #define _PCMCIA1 _PCMCIA(1) /* PCMCIA 1 */ | ||
75 | #define _PCMCIA1IO _PCMCIAIO(1) /* PCMCIA 1 I/O */ | ||
76 | #define _PCMCIA1Attr _PCMCIAAttr(1) /* PCMCIA 1 Attribute */ | ||
77 | #define _PCMCIA1Mem _PCMCIAMem(1) /* PCMCIA 1 Memory */ | ||
78 | |||
42 | 79 | ||
43 | #define MCXX_SETUP_MASK (0x7f) | 80 | #define MCXX_SETUP_MASK (0x7f) |
44 | #define MCXX_ASST_MASK (0x1f) | 81 | #define MCXX_ASST_MASK (0x1f) |
@@ -177,29 +214,73 @@ static void pxa2xx_configure_sockets(struct device *dev) | |||
177 | MECR |= MECR_CIT; | 214 | MECR |= MECR_CIT; |
178 | 215 | ||
179 | /* Set MECR:NOS (Number Of Sockets) */ | 216 | /* Set MECR:NOS (Number Of Sockets) */ |
180 | if (ops->nr > 1 || machine_is_viper()) | 217 | if ((ops->first + ops->nr) > 1 || machine_is_viper()) |
181 | MECR |= MECR_NOS; | 218 | MECR |= MECR_NOS; |
182 | else | 219 | else |
183 | MECR &= ~MECR_NOS; | 220 | MECR &= ~MECR_NOS; |
184 | } | 221 | } |
185 | 222 | ||
223 | static const char *skt_names[] = { | ||
224 | "PCMCIA socket 0", | ||
225 | "PCMCIA socket 1", | ||
226 | }; | ||
227 | |||
228 | #define SKT_DEV_INFO_SIZE(n) \ | ||
229 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
230 | |||
186 | int __pxa2xx_drv_pcmcia_probe(struct device *dev) | 231 | int __pxa2xx_drv_pcmcia_probe(struct device *dev) |
187 | { | 232 | { |
188 | int ret; | 233 | int i, ret; |
189 | struct pcmcia_low_level *ops; | 234 | struct pcmcia_low_level *ops; |
235 | struct skt_dev_info *sinfo; | ||
236 | struct soc_pcmcia_socket *skt; | ||
190 | 237 | ||
191 | if (!dev || !dev->platform_data) | 238 | if (!dev || !dev->platform_data) |
192 | return -ENODEV; | 239 | return -ENODEV; |
193 | 240 | ||
194 | ops = (struct pcmcia_low_level *)dev->platform_data; | 241 | ops = (struct pcmcia_low_level *)dev->platform_data; |
195 | 242 | ||
243 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL); | ||
244 | if (!sinfo) | ||
245 | return -ENOMEM; | ||
246 | |||
247 | sinfo->nskt = ops->nr; | ||
248 | |||
249 | /* Initialize processor specific parameters */ | ||
250 | for (i = 0; i < ops->nr; i++) { | ||
251 | skt = &sinfo->skt[i]; | ||
252 | |||
253 | skt->nr = ops->first + i; | ||
254 | skt->irq = NO_IRQ; | ||
255 | |||
256 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
257 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
258 | skt->res_skt.name = skt_names[skt->nr]; | ||
259 | skt->res_skt.flags = IORESOURCE_MEM; | ||
260 | |||
261 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
262 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
263 | skt->res_io.name = "io"; | ||
264 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
265 | |||
266 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
267 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
268 | skt->res_mem.name = "memory"; | ||
269 | skt->res_mem.flags = IORESOURCE_MEM; | ||
270 | |||
271 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
272 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
273 | skt->res_attr.name = "attribute"; | ||
274 | skt->res_attr.flags = IORESOURCE_MEM; | ||
275 | } | ||
276 | |||
196 | /* Provide our PXA2xx specific timing routines. */ | 277 | /* Provide our PXA2xx specific timing routines. */ |
197 | ops->set_timing = pxa2xx_pcmcia_set_timing; | 278 | ops->set_timing = pxa2xx_pcmcia_set_timing; |
198 | #ifdef CONFIG_CPU_FREQ | 279 | #ifdef CONFIG_CPU_FREQ |
199 | ops->frequency_change = pxa2xx_pcmcia_frequency_change; | 280 | ops->frequency_change = pxa2xx_pcmcia_frequency_change; |
200 | #endif | 281 | #endif |
201 | 282 | ||
202 | ret = soc_common_drv_pcmcia_probe(dev, ops, ops->first, ops->nr); | 283 | ret = soc_common_drv_pcmcia_probe(dev, ops, sinfo); |
203 | 284 | ||
204 | if (!ret) | 285 | if (!ret) |
205 | pxa2xx_configure_sockets(dev); | 286 | pxa2xx_configure_sockets(dev); |
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c index 7c8bcb47662..4ed64d8e95e 100644 --- a/drivers/pcmcia/pxa2xx_cm_x255.c +++ b/drivers/pcmcia/pxa2xx_cm_x255.c | |||
@@ -16,7 +16,6 @@ | |||
16 | #include <linux/gpio.h> | 16 | #include <linux/gpio.h> |
17 | 17 | ||
18 | #include <asm/mach-types.h> | 18 | #include <asm/mach-types.h> |
19 | #include <mach/pxa-regs.h> | ||
20 | 19 | ||
21 | #include "soc_common.h" | 20 | #include "soc_common.h" |
22 | 21 | ||
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c index 6c3aac37712..a7b943d01e3 100644 --- a/drivers/pcmcia/pxa2xx_cm_x270.c +++ b/drivers/pcmcia/pxa2xx_cm_x270.c | |||
@@ -16,7 +16,6 @@ | |||
16 | #include <linux/gpio.h> | 16 | #include <linux/gpio.h> |
17 | 17 | ||
18 | #include <asm/mach-types.h> | 18 | #include <asm/mach-types.h> |
19 | #include <mach/pxa-regs.h> | ||
20 | 19 | ||
21 | #include "soc_common.h" | 20 | #include "soc_common.h" |
22 | 21 | ||
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c index f663a011bf4..d09c0dc4a31 100644 --- a/drivers/pcmcia/pxa2xx_e740.c +++ b/drivers/pcmcia/pxa2xx_e740.c | |||
@@ -16,8 +16,6 @@ | |||
16 | #include <linux/interrupt.h> | 16 | #include <linux/interrupt.h> |
17 | #include <linux/platform_device.h> | 17 | #include <linux/platform_device.h> |
18 | 18 | ||
19 | #include <mach/hardware.h> | ||
20 | #include <mach/pxa-regs.h> | ||
21 | #include <mach/eseries-gpio.h> | 19 | #include <mach/eseries-gpio.h> |
22 | 20 | ||
23 | #include <asm/irq.h> | 21 | #include <asm/irq.h> |
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c index 37ec55df086..6cbb1b1f7cf 100644 --- a/drivers/pcmcia/pxa2xx_lubbock.c +++ b/drivers/pcmcia/pxa2xx_lubbock.c | |||
@@ -24,7 +24,6 @@ | |||
24 | #include <mach/hardware.h> | 24 | #include <mach/hardware.h> |
25 | #include <asm/hardware/sa1111.h> | 25 | #include <asm/hardware/sa1111.h> |
26 | #include <asm/mach-types.h> | 26 | #include <asm/mach-types.h> |
27 | #include <mach/pxa-regs.h> | ||
28 | #include <mach/lubbock.h> | 27 | #include <mach/lubbock.h> |
29 | 28 | ||
30 | #include "sa1111_generic.h" | 29 | #include "sa1111_generic.h" |
diff --git a/drivers/pcmcia/pxa2xx_mainstone.c b/drivers/pcmcia/pxa2xx_mainstone.c index 877001db491..1138551ba8f 100644 --- a/drivers/pcmcia/pxa2xx_mainstone.c +++ b/drivers/pcmcia/pxa2xx_mainstone.c | |||
@@ -21,11 +21,10 @@ | |||
21 | 21 | ||
22 | #include <pcmcia/ss.h> | 22 | #include <pcmcia/ss.h> |
23 | 23 | ||
24 | #include <mach/hardware.h> | ||
25 | #include <asm/mach-types.h> | 24 | #include <asm/mach-types.h> |
26 | #include <asm/irq.h> | 25 | #include <asm/irq.h> |
27 | 26 | ||
28 | #include <mach/pxa-regs.h> | 27 | #include <mach/pxa2xx-regs.h> |
29 | #include <mach/mainstone.h> | 28 | #include <mach/mainstone.h> |
30 | 29 | ||
31 | #include "soc_common.h" | 30 | #include "soc_common.h" |
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c index 1736c67e547..5ba9b3664a0 100644 --- a/drivers/pcmcia/pxa2xx_palmld.c +++ b/drivers/pcmcia/pxa2xx_palmld.c | |||
@@ -98,8 +98,8 @@ static void palmld_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | |||
98 | static struct pcmcia_low_level palmld_pcmcia_ops = { | 98 | static struct pcmcia_low_level palmld_pcmcia_ops = { |
99 | .owner = THIS_MODULE, | 99 | .owner = THIS_MODULE, |
100 | 100 | ||
101 | .first = 0, | 101 | .first = 1, |
102 | .nr = 2, | 102 | .nr = 1, |
103 | 103 | ||
104 | .hw_init = palmld_pcmcia_hw_init, | 104 | .hw_init = palmld_pcmcia_hw_init, |
105 | .hw_shutdown = palmld_pcmcia_hw_shutdown, | 105 | .hw_shutdown = palmld_pcmcia_hw_shutdown, |
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c index 36c7a0b324d..e0e5cb339b4 100644 --- a/drivers/pcmcia/pxa2xx_trizeps4.c +++ b/drivers/pcmcia/pxa2xx_trizeps4.c | |||
@@ -22,8 +22,7 @@ | |||
22 | #include <asm/mach-types.h> | 22 | #include <asm/mach-types.h> |
23 | #include <asm/irq.h> | 23 | #include <asm/irq.h> |
24 | 24 | ||
25 | #include <mach/hardware.h> | 25 | #include <mach/pxa2xx-regs.h> |
26 | #include <mach/pxa-regs.h> | ||
27 | #include <mach/trizeps4.h> | 26 | #include <mach/trizeps4.h> |
28 | 27 | ||
29 | #include "soc_common.h" | 28 | #include "soc_common.h" |
diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c index dd10481be7b..17871360fe9 100644 --- a/drivers/pcmcia/pxa2xx_viper.c +++ b/drivers/pcmcia/pxa2xx_viper.c | |||
@@ -26,7 +26,6 @@ | |||
26 | 26 | ||
27 | #include <asm/irq.h> | 27 | #include <asm/irq.h> |
28 | 28 | ||
29 | #include <mach/pxa-regs.h> | ||
30 | #include <mach/viper.h> | 29 | #include <mach/viper.h> |
31 | #include <asm/mach-types.h> | 30 | #include <asm/mach-types.h> |
32 | 31 | ||
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c index 6de4e1b41d6..0cc3748f375 100644 --- a/drivers/pcmcia/sa1100_h3600.c +++ b/drivers/pcmcia/sa1100_h3600.c | |||
@@ -37,9 +37,9 @@ static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) | |||
37 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); | 37 | soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); |
38 | 38 | ||
39 | /* Disable CF bus: */ | 39 | /* Disable CF bus: */ |
40 | clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 40 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); |
41 | clr_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 41 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); |
42 | set_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 42 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); |
43 | } | 43 | } |
44 | 44 | ||
45 | static void | 45 | static void |
@@ -79,10 +79,7 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ | |||
79 | return -1; | 79 | return -1; |
80 | } | 80 | } |
81 | 81 | ||
82 | if (state->flags & SS_RESET) | 82 | assign_h3600_egpio(IPAQ_EGPIO_CARD_RESET, !!(state->flags & SS_RESET)); |
83 | set_h3600_egpio(IPAQ_EGPIO_CARD_RESET); | ||
84 | else | ||
85 | clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET); | ||
86 | 83 | ||
87 | /* Silently ignore Vpp, output enable, speaker enable. */ | 84 | /* Silently ignore Vpp, output enable, speaker enable. */ |
88 | 85 | ||
@@ -92,9 +89,9 @@ h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_ | |||
92 | static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | 89 | static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt) |
93 | { | 90 | { |
94 | /* Enable CF bus: */ | 91 | /* Enable CF bus: */ |
95 | set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 92 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 1); |
96 | set_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 93 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 1); |
97 | clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 94 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 0); |
98 | 95 | ||
99 | msleep(10); | 96 | msleep(10); |
100 | 97 | ||
@@ -112,10 +109,10 @@ static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | |||
112 | * socket 0 then socket 1. | 109 | * socket 0 then socket 1. |
113 | */ | 110 | */ |
114 | if (skt->nr == 1) { | 111 | if (skt->nr == 1) { |
115 | clr_h3600_egpio(IPAQ_EGPIO_OPT_ON); | 112 | assign_h3600_egpio(IPAQ_EGPIO_OPT_ON, 0); |
116 | clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON); | 113 | assign_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON, 0); |
117 | /* hmm, does this suck power? */ | 114 | /* hmm, does this suck power? */ |
118 | set_h3600_egpio(IPAQ_EGPIO_OPT_RESET); | 115 | assign_h3600_egpio(IPAQ_EGPIO_OPT_RESET, 1); |
119 | } | 116 | } |
120 | } | 117 | } |
121 | 118 | ||
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 6924d0ea8d3..401052a21ce 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c | |||
@@ -11,12 +11,12 @@ | |||
11 | #include <linux/device.h> | 11 | #include <linux/device.h> |
12 | #include <linux/interrupt.h> | 12 | #include <linux/interrupt.h> |
13 | #include <linux/init.h> | 13 | #include <linux/init.h> |
14 | #include <linux/io.h> | ||
14 | 15 | ||
15 | #include <pcmcia/ss.h> | 16 | #include <pcmcia/ss.h> |
16 | 17 | ||
17 | #include <mach/hardware.h> | 18 | #include <mach/hardware.h> |
18 | #include <asm/hardware/sa1111.h> | 19 | #include <asm/hardware/sa1111.h> |
19 | #include <asm/io.h> | ||
20 | #include <asm/irq.h> | 20 | #include <asm/irq.h> |
21 | 21 | ||
22 | #include "sa1111_generic.h" | 22 | #include "sa1111_generic.h" |
diff --git a/drivers/pcmcia/sa11xx_base.c b/drivers/pcmcia/sa11xx_base.c index 7cb1273202c..e15d59f2d8a 100644 --- a/drivers/pcmcia/sa11xx_base.c +++ b/drivers/pcmcia/sa11xx_base.c | |||
@@ -36,9 +36,9 @@ | |||
36 | #include <linux/ioport.h> | 36 | #include <linux/ioport.h> |
37 | #include <linux/kernel.h> | 37 | #include <linux/kernel.h> |
38 | #include <linux/spinlock.h> | 38 | #include <linux/spinlock.h> |
39 | #include <linux/io.h> | ||
39 | 40 | ||
40 | #include <mach/hardware.h> | 41 | #include <mach/hardware.h> |
41 | #include <asm/io.h> | ||
42 | #include <asm/irq.h> | 42 | #include <asm/irq.h> |
43 | #include <asm/system.h> | 43 | #include <asm/system.h> |
44 | 44 | ||
@@ -163,9 +163,55 @@ sa1100_pcmcia_show_timing(struct soc_pcmcia_socket *skt, char *buf) | |||
163 | return p - buf; | 163 | return p - buf; |
164 | } | 164 | } |
165 | 165 | ||
166 | static const char *skt_names[] = { | ||
167 | "PCMCIA socket 0", | ||
168 | "PCMCIA socket 1", | ||
169 | }; | ||
170 | |||
171 | #define SKT_DEV_INFO_SIZE(n) \ | ||
172 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
173 | |||
166 | int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, | 174 | int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, |
167 | int first, int nr) | 175 | int first, int nr) |
168 | { | 176 | { |
177 | struct skt_dev_info *sinfo; | ||
178 | struct soc_pcmcia_socket *skt; | ||
179 | int i; | ||
180 | |||
181 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL); | ||
182 | if (!sinfo) | ||
183 | return -ENOMEM; | ||
184 | |||
185 | sinfo->nskt = nr; | ||
186 | |||
187 | /* Initiliaze processor specific parameters */ | ||
188 | for (i = 0; i < nr; i++) { | ||
189 | skt = &sinfo->skt[i]; | ||
190 | |||
191 | skt->nr = first + i; | ||
192 | skt->irq = NO_IRQ; | ||
193 | |||
194 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
195 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
196 | skt->res_skt.name = skt_names[skt->nr]; | ||
197 | skt->res_skt.flags = IORESOURCE_MEM; | ||
198 | |||
199 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
200 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
201 | skt->res_io.name = "io"; | ||
202 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
203 | |||
204 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
205 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
206 | skt->res_mem.name = "memory"; | ||
207 | skt->res_mem.flags = IORESOURCE_MEM; | ||
208 | |||
209 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
210 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
211 | skt->res_attr.name = "attribute"; | ||
212 | skt->res_attr.flags = IORESOURCE_MEM; | ||
213 | } | ||
214 | |||
169 | /* | 215 | /* |
170 | * set default MECR calculation if the board specific | 216 | * set default MECR calculation if the board specific |
171 | * code did not specify one... | 217 | * code did not specify one... |
@@ -180,7 +226,7 @@ int sa11xx_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, | |||
180 | ops->frequency_change = sa1100_pcmcia_frequency_change; | 226 | ops->frequency_change = sa1100_pcmcia_frequency_change; |
181 | #endif | 227 | #endif |
182 | 228 | ||
183 | return soc_common_drv_pcmcia_probe(dev, ops, first, nr); | 229 | return soc_common_drv_pcmcia_probe(dev, ops, sinfo); |
184 | } | 230 | } |
185 | EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe); | 231 | EXPORT_SYMBOL(sa11xx_drv_pcmcia_probe); |
186 | 232 | ||
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index f49ac666615..163cf98e238 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c | |||
@@ -49,11 +49,6 @@ | |||
49 | 49 | ||
50 | #include "soc_common.h" | 50 | #include "soc_common.h" |
51 | 51 | ||
52 | /* FIXME: platform dependent resource declaration has to move out of this file */ | ||
53 | #ifdef CONFIG_ARCH_PXA | ||
54 | #include <mach/pxa-regs.h> | ||
55 | #endif | ||
56 | |||
57 | #ifdef CONFIG_PCMCIA_DEBUG | 52 | #ifdef CONFIG_PCMCIA_DEBUG |
58 | 53 | ||
59 | static int pc_debug; | 54 | static int pc_debug; |
@@ -581,19 +576,6 @@ EXPORT_SYMBOL(soc_pcmcia_enable_irqs); | |||
581 | LIST_HEAD(soc_pcmcia_sockets); | 576 | LIST_HEAD(soc_pcmcia_sockets); |
582 | static DEFINE_MUTEX(soc_pcmcia_sockets_lock); | 577 | static DEFINE_MUTEX(soc_pcmcia_sockets_lock); |
583 | 578 | ||
584 | static const char *skt_names[] = { | ||
585 | "PCMCIA socket 0", | ||
586 | "PCMCIA socket 1", | ||
587 | }; | ||
588 | |||
589 | struct skt_dev_info { | ||
590 | int nskt; | ||
591 | struct soc_pcmcia_socket skt[0]; | ||
592 | }; | ||
593 | |||
594 | #define SKT_DEV_INFO_SIZE(n) \ | ||
595 | (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) | ||
596 | |||
597 | #ifdef CONFIG_CPU_FREQ | 579 | #ifdef CONFIG_CPU_FREQ |
598 | static int | 580 | static int |
599 | soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) | 581 | soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) |
@@ -637,26 +619,18 @@ static int soc_pcmcia_cpufreq_register(void) { return 0; } | |||
637 | static void soc_pcmcia_cpufreq_unregister(void) {} | 619 | static void soc_pcmcia_cpufreq_unregister(void) {} |
638 | #endif | 620 | #endif |
639 | 621 | ||
640 | int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) | 622 | int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, |
623 | struct skt_dev_info *sinfo) | ||
641 | { | 624 | { |
642 | struct skt_dev_info *sinfo; | ||
643 | struct soc_pcmcia_socket *skt; | 625 | struct soc_pcmcia_socket *skt; |
644 | int ret, i; | 626 | int ret, i; |
645 | 627 | ||
646 | mutex_lock(&soc_pcmcia_sockets_lock); | 628 | mutex_lock(&soc_pcmcia_sockets_lock); |
647 | 629 | ||
648 | sinfo = kzalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL); | ||
649 | if (!sinfo) { | ||
650 | ret = -ENOMEM; | ||
651 | goto out; | ||
652 | } | ||
653 | |||
654 | sinfo->nskt = nr; | ||
655 | |||
656 | /* | 630 | /* |
657 | * Initialise the per-socket structure. | 631 | * Initialise the per-socket structure. |
658 | */ | 632 | */ |
659 | for (i = 0; i < nr; i++) { | 633 | for (i = 0; i < sinfo->nskt; i++) { |
660 | skt = &sinfo->skt[i]; | 634 | skt = &sinfo->skt[i]; |
661 | 635 | ||
662 | skt->socket.ops = &soc_common_pcmcia_operations; | 636 | skt->socket.ops = &soc_common_pcmcia_operations; |
@@ -668,43 +642,21 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops | |||
668 | skt->poll_timer.data = (unsigned long)skt; | 642 | skt->poll_timer.data = (unsigned long)skt; |
669 | skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; | 643 | skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; |
670 | 644 | ||
671 | skt->nr = first + i; | ||
672 | skt->irq = NO_IRQ; | ||
673 | skt->dev = dev; | 645 | skt->dev = dev; |
674 | skt->ops = ops; | 646 | skt->ops = ops; |
675 | 647 | ||
676 | skt->res_skt.start = _PCMCIA(skt->nr); | ||
677 | skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; | ||
678 | skt->res_skt.name = skt_names[skt->nr]; | ||
679 | skt->res_skt.flags = IORESOURCE_MEM; | ||
680 | |||
681 | ret = request_resource(&iomem_resource, &skt->res_skt); | 648 | ret = request_resource(&iomem_resource, &skt->res_skt); |
682 | if (ret) | 649 | if (ret) |
683 | goto out_err_1; | 650 | goto out_err_1; |
684 | 651 | ||
685 | skt->res_io.start = _PCMCIAIO(skt->nr); | ||
686 | skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; | ||
687 | skt->res_io.name = "io"; | ||
688 | skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; | ||
689 | |||
690 | ret = request_resource(&skt->res_skt, &skt->res_io); | 652 | ret = request_resource(&skt->res_skt, &skt->res_io); |
691 | if (ret) | 653 | if (ret) |
692 | goto out_err_2; | 654 | goto out_err_2; |
693 | 655 | ||
694 | skt->res_mem.start = _PCMCIAMem(skt->nr); | ||
695 | skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; | ||
696 | skt->res_mem.name = "memory"; | ||
697 | skt->res_mem.flags = IORESOURCE_MEM; | ||
698 | |||
699 | ret = request_resource(&skt->res_skt, &skt->res_mem); | 656 | ret = request_resource(&skt->res_skt, &skt->res_mem); |
700 | if (ret) | 657 | if (ret) |
701 | goto out_err_3; | 658 | goto out_err_3; |
702 | 659 | ||
703 | skt->res_attr.start = _PCMCIAAttr(skt->nr); | ||
704 | skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; | ||
705 | skt->res_attr.name = "attribute"; | ||
706 | skt->res_attr.flags = IORESOURCE_MEM; | ||
707 | |||
708 | ret = request_resource(&skt->res_skt, &skt->res_attr); | 660 | ret = request_resource(&skt->res_skt, &skt->res_attr); |
709 | if (ret) | 661 | if (ret) |
710 | goto out_err_4; | 662 | goto out_err_4; |
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 38c67375f36..290e143839e 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h | |||
@@ -58,6 +58,11 @@ struct soc_pcmcia_socket { | |||
58 | struct list_head node; | 58 | struct list_head node; |
59 | }; | 59 | }; |
60 | 60 | ||
61 | struct skt_dev_info { | ||
62 | int nskt; | ||
63 | struct soc_pcmcia_socket skt[0]; | ||
64 | }; | ||
65 | |||
61 | struct pcmcia_state { | 66 | struct pcmcia_state { |
62 | unsigned detect: 1, | 67 | unsigned detect: 1, |
63 | ready: 1, | 68 | ready: 1, |
@@ -132,7 +137,7 @@ extern void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *, struct soc_ | |||
132 | 137 | ||
133 | extern struct list_head soc_pcmcia_sockets; | 138 | extern struct list_head soc_pcmcia_sockets; |
134 | 139 | ||
135 | extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr); | 140 | extern int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, struct skt_dev_info *sinfo); |
136 | extern int soc_common_drv_pcmcia_remove(struct device *dev); | 141 | extern int soc_common_drv_pcmcia_remove(struct device *dev); |
137 | 142 | ||
138 | 143 | ||
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c index 45f12dcd371..e0263d2005e 100644 --- a/drivers/rtc/rtc-mv.c +++ b/drivers/rtc/rtc-mv.c | |||
@@ -12,6 +12,7 @@ | |||
12 | #include <linux/bcd.h> | 12 | #include <linux/bcd.h> |
13 | #include <linux/io.h> | 13 | #include <linux/io.h> |
14 | #include <linux/platform_device.h> | 14 | #include <linux/platform_device.h> |
15 | #include <linux/delay.h> | ||
15 | 16 | ||
16 | 17 | ||
17 | #define RTC_TIME_REG_OFFS 0 | 18 | #define RTC_TIME_REG_OFFS 0 |
@@ -119,6 +120,16 @@ static int __init mv_rtc_probe(struct platform_device *pdev) | |||
119 | return -EINVAL; | 120 | return -EINVAL; |
120 | } | 121 | } |
121 | 122 | ||
123 | /* make sure it is actually functional */ | ||
124 | if (rtc_time == 0x01000000) { | ||
125 | ssleep(1); | ||
126 | rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS); | ||
127 | if (rtc_time == 0x01000000) { | ||
128 | dev_err(&pdev->dev, "internal RTC not ticking\n"); | ||
129 | return -ENODEV; | ||
130 | } | ||
131 | } | ||
132 | |||
122 | platform_set_drvdata(pdev, pdata); | 133 | platform_set_drvdata(pdev, pdata); |
123 | pdata->rtc = rtc_device_register(pdev->name, &pdev->dev, | 134 | pdata->rtc = rtc_device_register(pdev->name, &pdev->dev, |
124 | &mv_rtc_ops, THIS_MODULE); | 135 | &mv_rtc_ops, THIS_MODULE); |
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index d26a5f82aab..4f247e4dd3f 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c | |||
@@ -35,7 +35,8 @@ | |||
35 | #include <asm/irq.h> | 35 | #include <asm/irq.h> |
36 | 36 | ||
37 | #ifdef CONFIG_ARCH_PXA | 37 | #ifdef CONFIG_ARCH_PXA |
38 | #include <mach/pxa-regs.h> | 38 | #include <mach/regs-rtc.h> |
39 | #include <mach/regs-ost.h> | ||
39 | #endif | 40 | #endif |
40 | 41 | ||
41 | #define RTC_DEF_DIVIDER 32768 - 1 | 42 | #define RTC_DEF_DIVIDER 32768 - 1 |
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c index 68a64123af8..c9902b5c1f2 100644 --- a/drivers/scsi/arm/cumana_2.c +++ b/drivers/scsi/arm/cumana_2.c | |||
@@ -318,7 +318,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length) | |||
318 | { | 318 | { |
319 | int ret = length; | 319 | int ret = length; |
320 | 320 | ||
321 | if (length >= 11 && strcmp(buffer, "CUMANASCSI2") == 0) { | 321 | if (length >= 11 && strncmp(buffer, "CUMANASCSI2", 11) == 0) { |
322 | buffer += 11; | 322 | buffer += 11; |
323 | length -= 11; | 323 | length -= 11; |
324 | 324 | ||
@@ -390,7 +390,8 @@ static struct scsi_host_template cumanascsi2_template = { | |||
390 | .eh_abort_handler = fas216_eh_abort, | 390 | .eh_abort_handler = fas216_eh_abort, |
391 | .can_queue = 1, | 391 | .can_queue = 1, |
392 | .this_id = 7, | 392 | .this_id = 7, |
393 | .sg_tablesize = SG_ALL, | 393 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
394 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
394 | .cmd_per_lun = 1, | 395 | .cmd_per_lun = 1, |
395 | .use_clustering = DISABLE_CLUSTERING, | 396 | .use_clustering = DISABLE_CLUSTERING, |
396 | .proc_name = "cumanascsi2", | 397 | .proc_name = "cumanascsi2", |
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c index bb2477b3fb0..d8435132f46 100644 --- a/drivers/scsi/arm/eesox.c +++ b/drivers/scsi/arm/eesox.c | |||
@@ -508,7 +508,8 @@ static struct scsi_host_template eesox_template = { | |||
508 | .eh_abort_handler = fas216_eh_abort, | 508 | .eh_abort_handler = fas216_eh_abort, |
509 | .can_queue = 1, | 509 | .can_queue = 1, |
510 | .this_id = 7, | 510 | .this_id = 7, |
511 | .sg_tablesize = SG_ALL, | 511 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
512 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
512 | .cmd_per_lun = 1, | 513 | .cmd_per_lun = 1, |
513 | .use_clustering = DISABLE_CLUSTERING, | 514 | .use_clustering = DISABLE_CLUSTERING, |
514 | .proc_name = "eesox", | 515 | .proc_name = "eesox", |
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c index d9a546d1917..e2297b4c1b9 100644 --- a/drivers/scsi/arm/powertec.c +++ b/drivers/scsi/arm/powertec.c | |||
@@ -302,7 +302,8 @@ static struct scsi_host_template powertecscsi_template = { | |||
302 | 302 | ||
303 | .can_queue = 8, | 303 | .can_queue = 8, |
304 | .this_id = 7, | 304 | .this_id = 7, |
305 | .sg_tablesize = SG_ALL, | 305 | .sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS, |
306 | .dma_boundary = IOMD_DMA_BOUNDARY, | ||
306 | .cmd_per_lun = 2, | 307 | .cmd_per_lun = 2, |
307 | .use_clustering = ENABLE_CLUSTERING, | 308 | .use_clustering = ENABLE_CLUSTERING, |
308 | .proc_name = "powertec", | 309 | .proc_name = "powertec", |
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c index f31c6698419..cb6d85d7ff4 100644 --- a/drivers/serial/21285.c +++ b/drivers/serial/21285.c | |||
@@ -14,8 +14,8 @@ | |||
14 | #include <linux/tty_flip.h> | 14 | #include <linux/tty_flip.h> |
15 | #include <linux/serial_core.h> | 15 | #include <linux/serial_core.h> |
16 | #include <linux/serial.h> | 16 | #include <linux/serial.h> |
17 | #include <linux/io.h> | ||
17 | 18 | ||
18 | #include <asm/io.h> | ||
19 | #include <asm/irq.h> | 19 | #include <asm/irq.h> |
20 | #include <asm/mach-types.h> | 20 | #include <asm/mach-types.h> |
21 | #include <asm/hardware/dec21285.h> | 21 | #include <asm/hardware/dec21285.h> |
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 7d7f576da20..9be11b0963f 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig | |||
@@ -628,7 +628,7 @@ config SERIAL_MPSC_CONSOLE | |||
628 | 628 | ||
629 | config SERIAL_PXA | 629 | config SERIAL_PXA |
630 | bool "PXA serial port support" | 630 | bool "PXA serial port support" |
631 | depends on ARM && ARCH_PXA | 631 | depends on ARCH_PXA || ARCH_MMP |
632 | select SERIAL_CORE | 632 | select SERIAL_CORE |
633 | help | 633 | help |
634 | If you have a machine based on an Intel XScale PXA2xx CPU you | 634 | If you have a machine based on an Intel XScale PXA2xx CPU you |
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c index 459f3420a42..80e76426131 100644 --- a/drivers/serial/clps711x.c +++ b/drivers/serial/clps711x.c | |||
@@ -38,9 +38,9 @@ | |||
38 | #include <linux/tty_flip.h> | 38 | #include <linux/tty_flip.h> |
39 | #include <linux/serial_core.h> | 39 | #include <linux/serial_core.h> |
40 | #include <linux/serial.h> | 40 | #include <linux/serial.h> |
41 | #include <linux/io.h> | ||
41 | 42 | ||
42 | #include <mach/hardware.h> | 43 | #include <mach/hardware.h> |
43 | #include <asm/io.h> | ||
44 | #include <asm/irq.h> | 44 | #include <asm/irq.h> |
45 | #include <asm/hardware/clps7111.h> | 45 | #include <asm/hardware/clps7111.h> |
46 | 46 | ||
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index a50954612b6..9f460b175c5 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c | |||
@@ -1129,7 +1129,7 @@ static int serial_imx_probe(struct platform_device *pdev) | |||
1129 | sport->timer.function = imx_timeout; | 1129 | sport->timer.function = imx_timeout; |
1130 | sport->timer.data = (unsigned long)sport; | 1130 | sport->timer.data = (unsigned long)sport; |
1131 | 1131 | ||
1132 | sport->clk = clk_get(&pdev->dev, "uart_clk"); | 1132 | sport->clk = clk_get(&pdev->dev, "uart"); |
1133 | if (IS_ERR(sport->clk)) { | 1133 | if (IS_ERR(sport->clk)) { |
1134 | ret = PTR_ERR(sport->clk); | 1134 | ret = PTR_ERR(sport->clk); |
1135 | goto unmap; | 1135 | goto unmap; |
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c index f6e3b86bb0b..a48a8a13d87 100644 --- a/drivers/serial/pxa.c +++ b/drivers/serial/pxa.c | |||
@@ -43,13 +43,7 @@ | |||
43 | #include <linux/tty_flip.h> | 43 | #include <linux/tty_flip.h> |
44 | #include <linux/serial_core.h> | 44 | #include <linux/serial_core.h> |
45 | #include <linux/clk.h> | 45 | #include <linux/clk.h> |
46 | 46 | #include <linux/io.h> | |
47 | #include <asm/io.h> | ||
48 | #include <mach/hardware.h> | ||
49 | #include <asm/irq.h> | ||
50 | #include <mach/pxa-regs.h> | ||
51 | #include <mach/regs-uart.h> | ||
52 | |||
53 | 47 | ||
54 | struct uart_pxa_port { | 48 | struct uart_pxa_port { |
55 | struct uart_port port; | 49 | struct uart_port port; |
@@ -491,7 +485,7 @@ serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios, | |||
491 | * Ensure the port will be enabled. | 485 | * Ensure the port will be enabled. |
492 | * This is required especially for serial console. | 486 | * This is required especially for serial console. |
493 | */ | 487 | */ |
494 | up->ier |= IER_UUE; | 488 | up->ier |= UART_IER_UUE; |
495 | 489 | ||
496 | /* | 490 | /* |
497 | * Update the per-port timeout. | 491 | * Update the per-port timeout. |
@@ -784,19 +778,15 @@ static int serial_pxa_probe(struct platform_device *dev) | |||
784 | sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; | 778 | sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; |
785 | sport->port.uartclk = clk_get_rate(sport->clk); | 779 | sport->port.uartclk = clk_get_rate(sport->clk); |
786 | 780 | ||
787 | /* | 781 | switch (dev->id) { |
788 | * Is it worth keeping this? | 782 | case 0: sport->name = "FFUART"; break; |
789 | */ | 783 | case 1: sport->name = "BTUART"; break; |
790 | if (mmres->start == __PREG(FFUART)) | 784 | case 2: sport->name = "STUART"; break; |
791 | sport->name = "FFUART"; | 785 | case 3: sport->name = "HWUART"; break; |
792 | else if (mmres->start == __PREG(BTUART)) | 786 | default: |
793 | sport->name = "BTUART"; | ||
794 | else if (mmres->start == __PREG(STUART)) | ||
795 | sport->name = "STUART"; | ||
796 | else if (mmres->start == __PREG(HWUART)) | ||
797 | sport->name = "HWUART"; | ||
798 | else | ||
799 | sport->name = "???"; | 787 | sport->name = "???"; |
788 | break; | ||
789 | } | ||
800 | 790 | ||
801 | sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); | 791 | sport->port.membase = ioremap(mmres->start, mmres->end - mmres->start + 1); |
802 | if (!sport->port.membase) { | 792 | if (!sport->port.membase) { |
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c index b24a25ea6bc..94530f01521 100644 --- a/drivers/serial/sa1100.c +++ b/drivers/serial/sa1100.c | |||
@@ -36,8 +36,8 @@ | |||
36 | #include <linux/tty_flip.h> | 36 | #include <linux/tty_flip.h> |
37 | #include <linux/serial_core.h> | 37 | #include <linux/serial_core.h> |
38 | #include <linux/serial.h> | 38 | #include <linux/serial.h> |
39 | #include <linux/io.h> | ||
39 | 40 | ||
40 | #include <asm/io.h> | ||
41 | #include <asm/irq.h> | 41 | #include <asm/irq.h> |
42 | #include <mach/hardware.h> | 42 | #include <mach/hardware.h> |
43 | #include <asm/mach/serial_sa1100.h> | 43 | #include <asm/mach/serial_sa1100.h> |
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index 1c65e380c84..d6d0c5d241c 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c | |||
@@ -1021,13 +1021,13 @@ static int __init omap2_mcspi_probe(struct platform_device *pdev) | |||
1021 | spin_lock_init(&mcspi->lock); | 1021 | spin_lock_init(&mcspi->lock); |
1022 | INIT_LIST_HEAD(&mcspi->msg_queue); | 1022 | INIT_LIST_HEAD(&mcspi->msg_queue); |
1023 | 1023 | ||
1024 | mcspi->ick = clk_get(&pdev->dev, "mcspi_ick"); | 1024 | mcspi->ick = clk_get(&pdev->dev, "ick"); |
1025 | if (IS_ERR(mcspi->ick)) { | 1025 | if (IS_ERR(mcspi->ick)) { |
1026 | dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); | 1026 | dev_dbg(&pdev->dev, "can't get mcspi_ick\n"); |
1027 | status = PTR_ERR(mcspi->ick); | 1027 | status = PTR_ERR(mcspi->ick); |
1028 | goto err1a; | 1028 | goto err1a; |
1029 | } | 1029 | } |
1030 | mcspi->fck = clk_get(&pdev->dev, "mcspi_fck"); | 1030 | mcspi->fck = clk_get(&pdev->dev, "fck"); |
1031 | if (IS_ERR(mcspi->fck)) { | 1031 | if (IS_ERR(mcspi->fck)) { |
1032 | dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); | 1032 | dev_dbg(&pdev->dev, "can't get mcspi_fck\n"); |
1033 | status = PTR_ERR(mcspi->fck); | 1033 | status = PTR_ERR(mcspi->fck); |
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index 60b5381c65c..fe8b9ac0cce 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c | |||
@@ -506,11 +506,12 @@ static int __init uwire_probe(struct platform_device *pdev) | |||
506 | 506 | ||
507 | dev_set_drvdata(&pdev->dev, uwire); | 507 | dev_set_drvdata(&pdev->dev, uwire); |
508 | 508 | ||
509 | uwire->ck = clk_get(&pdev->dev, "armxor_ck"); | 509 | uwire->ck = clk_get(&pdev->dev, "fck"); |
510 | if (!uwire->ck || IS_ERR(uwire->ck)) { | 510 | if (IS_ERR(uwire->ck)) { |
511 | dev_dbg(&pdev->dev, "no mpu_xor_clk ?\n"); | 511 | status = PTR_ERR(uwire->ck); |
512 | dev_dbg(&pdev->dev, "no functional clock?\n"); | ||
512 | spi_master_put(master); | 513 | spi_master_put(master); |
513 | return -ENODEV; | 514 | return status; |
514 | } | 515 | } |
515 | clk_enable(uwire->ck); | 516 | clk_enable(uwire->ck); |
516 | 517 | ||
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index ec24f2d16f3..33fcef3150d 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c | |||
@@ -34,8 +34,6 @@ | |||
34 | #include <asm/delay.h> | 34 | #include <asm/delay.h> |
35 | 35 | ||
36 | #include <mach/dma.h> | 36 | #include <mach/dma.h> |
37 | #include <mach/hardware.h> | ||
38 | #include <mach/pxa-regs.h> | ||
39 | #include <mach/regs-ssp.h> | 37 | #include <mach/regs-ssp.h> |
40 | #include <mach/ssp.h> | 38 | #include <mach/ssp.h> |
41 | #include <mach/pxa2xx_spi.h> | 39 | #include <mach/pxa2xx_spi.h> |
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c index fb3055f084b..7cf74f8c2db 100644 --- a/drivers/usb/host/ohci-ep93xx.c +++ b/drivers/usb/host/ohci-ep93xx.c | |||
@@ -28,8 +28,6 @@ | |||
28 | #include <linux/signal.h> | 28 | #include <linux/signal.h> |
29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
30 | 30 | ||
31 | #include <mach/hardware.h> | ||
32 | |||
33 | static struct clk *usb_host_clock; | 31 | static struct clk *usb_host_clock; |
34 | 32 | ||
35 | static void ep93xx_start_hc(struct device *dev) | 33 | static void ep93xx_start_hc(struct device *dev) |
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index fb19803060c..41c27a44bd8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig | |||
@@ -397,7 +397,7 @@ config FB_SA1100 | |||
397 | 397 | ||
398 | config FB_IMX | 398 | config FB_IMX |
399 | tristate "Motorola i.MX LCD support" | 399 | tristate "Motorola i.MX LCD support" |
400 | depends on FB && ARM && ARCH_IMX | 400 | depends on FB && (ARCH_IMX || ARCH_MX2) |
401 | select FB_CFB_FILLRECT | 401 | select FB_CFB_FILLRECT |
402 | select FB_CFB_COPYAREA | 402 | select FB_CFB_COPYAREA |
403 | select FB_CFB_IMAGEBLIT | 403 | select FB_CFB_IMAGEBLIT |
@@ -2120,16 +2120,30 @@ config FB_PRE_INIT_FB | |||
2120 | the bootloader. | 2120 | the bootloader. |
2121 | 2121 | ||
2122 | config FB_MX3 | 2122 | config FB_MX3 |
2123 | tristate "MX3 Framebuffer support" | 2123 | tristate "MX3 Framebuffer support" |
2124 | depends on FB && MX3_IPU | 2124 | depends on FB && MX3_IPU |
2125 | select FB_CFB_FILLRECT | 2125 | select FB_CFB_FILLRECT |
2126 | select FB_CFB_COPYAREA | 2126 | select FB_CFB_COPYAREA |
2127 | select FB_CFB_IMAGEBLIT | 2127 | select FB_CFB_IMAGEBLIT |
2128 | default y | 2128 | default y |
2129 | help | 2129 | help |
2130 | This is a framebuffer device for the i.MX31 LCD Controller. So | 2130 | This is a framebuffer device for the i.MX31 LCD Controller. So |
2131 | far only synchronous displays are supported. If you plan to use | 2131 | far only synchronous displays are supported. If you plan to use |
2132 | an LCD display with your i.MX31 system, say Y here. | 2132 | an LCD display with your i.MX31 system, say Y here. |
2133 | |||
2134 | config FB_BROADSHEET | ||
2135 | tristate "E-Ink Broadsheet/Epson S1D13521 controller support" | ||
2136 | depends on FB | ||
2137 | select FB_SYS_FILLRECT | ||
2138 | select FB_SYS_COPYAREA | ||
2139 | select FB_SYS_IMAGEBLIT | ||
2140 | select FB_SYS_FOPS | ||
2141 | select FB_DEFERRED_IO | ||
2142 | help | ||
2143 | This driver implements support for the E-Ink Broadsheet | ||
2144 | controller. The release name for this device was Epson S1D13521 | ||
2145 | and could also have been called by other names when coupled with | ||
2146 | a bridge adapter. | ||
2133 | 2147 | ||
2134 | source "drivers/video/omap/Kconfig" | 2148 | source "drivers/video/omap/Kconfig" |
2135 | 2149 | ||
diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 2a998ca6181..bb265eca7d5 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile | |||
@@ -106,6 +106,7 @@ obj-$(CONFIG_FB_PMAG_BA) += pmag-ba-fb.o | |||
106 | obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o | 106 | obj-$(CONFIG_FB_PMAGB_B) += pmagb-b-fb.o |
107 | obj-$(CONFIG_FB_MAXINE) += maxinefb.o | 107 | obj-$(CONFIG_FB_MAXINE) += maxinefb.o |
108 | obj-$(CONFIG_FB_METRONOME) += metronomefb.o | 108 | obj-$(CONFIG_FB_METRONOME) += metronomefb.o |
109 | obj-$(CONFIG_FB_BROADSHEET) += broadsheetfb.o | ||
109 | obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o | 110 | obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o |
110 | obj-$(CONFIG_FB_SH7760) += sh7760fb.o | 111 | obj-$(CONFIG_FB_SH7760) += sh7760fb.o |
111 | obj-$(CONFIG_FB_IMX) += imxfb.o | 112 | obj-$(CONFIG_FB_IMX) += imxfb.o |
@@ -132,7 +133,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o | |||
132 | obj-$(CONFIG_FB_OF) += offb.o | 133 | obj-$(CONFIG_FB_OF) += offb.o |
133 | obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o | 134 | obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o |
134 | obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o | 135 | obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o |
135 | obj-$(CONFIG_FB_MX3) += mx3fb.o | 136 | obj-$(CONFIG_FB_MX3) += mx3fb.o |
136 | 137 | ||
137 | # the test framebuffer is last | 138 | # the test framebuffer is last |
138 | obj-$(CONFIG_FB_VIRTUAL) += vfb.o | 139 | obj-$(CONFIG_FB_VIRTUAL) += vfb.o |
diff --git a/drivers/video/acornfb.c b/drivers/video/acornfb.c index 61c3d3f40fd..6995fe1e86d 100644 --- a/drivers/video/acornfb.c +++ b/drivers/video/acornfb.c | |||
@@ -28,9 +28,9 @@ | |||
28 | #include <linux/fb.h> | 28 | #include <linux/fb.h> |
29 | #include <linux/platform_device.h> | 29 | #include <linux/platform_device.h> |
30 | #include <linux/dma-mapping.h> | 30 | #include <linux/dma-mapping.h> |
31 | #include <linux/io.h> | ||
31 | 32 | ||
32 | #include <mach/hardware.h> | 33 | #include <mach/hardware.h> |
33 | #include <asm/io.h> | ||
34 | #include <asm/irq.h> | 34 | #include <asm/irq.h> |
35 | #include <asm/mach-types.h> | 35 | #include <asm/mach-types.h> |
36 | #include <asm/pgtable.h> | 36 | #include <asm/pgtable.h> |
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/broadsheetfb.c new file mode 100644 index 00000000000..509cb92e873 --- /dev/null +++ b/drivers/video/broadsheetfb.c | |||
@@ -0,0 +1,568 @@ | |||
1 | /* | ||
2 | * broadsheetfb.c -- FB driver for E-Ink Broadsheet controller | ||
3 | * | ||
4 | * Copyright (C) 2008, Jaya Kumar | ||
5 | * | ||
6 | * This file is subject to the terms and conditions of the GNU General Public | ||
7 | * License. See the file COPYING in the main directory of this archive for | ||
8 | * more details. | ||
9 | * | ||
10 | * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. | ||
11 | * | ||
12 | * This driver is written to be used with the Broadsheet display controller. | ||
13 | * | ||
14 | * It is intended to be architecture independent. A board specific driver | ||
15 | * must be used to perform all the physical IO interactions. | ||
16 | * | ||
17 | */ | ||
18 | |||
19 | #include <linux/module.h> | ||
20 | #include <linux/kernel.h> | ||
21 | #include <linux/errno.h> | ||
22 | #include <linux/string.h> | ||
23 | #include <linux/mm.h> | ||
24 | #include <linux/slab.h> | ||
25 | #include <linux/vmalloc.h> | ||
26 | #include <linux/delay.h> | ||
27 | #include <linux/interrupt.h> | ||
28 | #include <linux/fb.h> | ||
29 | #include <linux/init.h> | ||
30 | #include <linux/platform_device.h> | ||
31 | #include <linux/list.h> | ||
32 | #include <linux/uaccess.h> | ||
33 | |||
34 | #include <video/broadsheetfb.h> | ||
35 | |||
36 | /* Display specific information */ | ||
37 | #define DPY_W 800 | ||
38 | #define DPY_H 600 | ||
39 | |||
40 | static struct fb_fix_screeninfo broadsheetfb_fix __devinitdata = { | ||
41 | .id = "broadsheetfb", | ||
42 | .type = FB_TYPE_PACKED_PIXELS, | ||
43 | .visual = FB_VISUAL_STATIC_PSEUDOCOLOR, | ||
44 | .xpanstep = 0, | ||
45 | .ypanstep = 0, | ||
46 | .ywrapstep = 0, | ||
47 | .line_length = DPY_W, | ||
48 | .accel = FB_ACCEL_NONE, | ||
49 | }; | ||
50 | |||
51 | static struct fb_var_screeninfo broadsheetfb_var __devinitdata = { | ||
52 | .xres = DPY_W, | ||
53 | .yres = DPY_H, | ||
54 | .xres_virtual = DPY_W, | ||
55 | .yres_virtual = DPY_H, | ||
56 | .bits_per_pixel = 8, | ||
57 | .grayscale = 1, | ||
58 | .red = { 0, 4, 0 }, | ||
59 | .green = { 0, 4, 0 }, | ||
60 | .blue = { 0, 4, 0 }, | ||
61 | .transp = { 0, 0, 0 }, | ||
62 | }; | ||
63 | |||
64 | /* main broadsheetfb functions */ | ||
65 | static void broadsheet_issue_data(struct broadsheetfb_par *par, u16 data) | ||
66 | { | ||
67 | par->board->set_ctl(par, BS_WR, 0); | ||
68 | par->board->set_hdb(par, data); | ||
69 | par->board->set_ctl(par, BS_WR, 1); | ||
70 | } | ||
71 | |||
72 | static void broadsheet_issue_cmd(struct broadsheetfb_par *par, u16 data) | ||
73 | { | ||
74 | par->board->set_ctl(par, BS_DC, 0); | ||
75 | broadsheet_issue_data(par, data); | ||
76 | } | ||
77 | |||
78 | static void broadsheet_send_command(struct broadsheetfb_par *par, u16 data) | ||
79 | { | ||
80 | par->board->wait_for_rdy(par); | ||
81 | |||
82 | par->board->set_ctl(par, BS_CS, 0); | ||
83 | broadsheet_issue_cmd(par, data); | ||
84 | par->board->set_ctl(par, BS_DC, 1); | ||
85 | par->board->set_ctl(par, BS_CS, 1); | ||
86 | } | ||
87 | |||
88 | static void broadsheet_send_cmdargs(struct broadsheetfb_par *par, u16 cmd, | ||
89 | int argc, u16 *argv) | ||
90 | { | ||
91 | int i; | ||
92 | |||
93 | par->board->wait_for_rdy(par); | ||
94 | |||
95 | par->board->set_ctl(par, BS_CS, 0); | ||
96 | broadsheet_issue_cmd(par, cmd); | ||
97 | par->board->set_ctl(par, BS_DC, 1); | ||
98 | |||
99 | for (i = 0; i < argc; i++) | ||
100 | broadsheet_issue_data(par, argv[i]); | ||
101 | par->board->set_ctl(par, BS_CS, 1); | ||
102 | } | ||
103 | |||
104 | static void broadsheet_burst_write(struct broadsheetfb_par *par, int size, | ||
105 | u16 *data) | ||
106 | { | ||
107 | int i; | ||
108 | u16 tmp; | ||
109 | |||
110 | par->board->set_ctl(par, BS_CS, 0); | ||
111 | par->board->set_ctl(par, BS_DC, 1); | ||
112 | |||
113 | for (i = 0; i < size; i++) { | ||
114 | par->board->set_ctl(par, BS_WR, 0); | ||
115 | tmp = (data[i] & 0x0F) << 4; | ||
116 | tmp |= (data[i] & 0x0F00) << 4; | ||
117 | par->board->set_hdb(par, tmp); | ||
118 | par->board->set_ctl(par, BS_WR, 1); | ||
119 | } | ||
120 | |||
121 | par->board->set_ctl(par, BS_CS, 1); | ||
122 | } | ||
123 | |||
124 | static u16 broadsheet_get_data(struct broadsheetfb_par *par) | ||
125 | { | ||
126 | u16 res; | ||
127 | /* wait for ready to go hi. (lo is busy) */ | ||
128 | par->board->wait_for_rdy(par); | ||
129 | |||
130 | /* cs lo, dc lo for cmd, we lo for each data, db as usual */ | ||
131 | par->board->set_ctl(par, BS_DC, 1); | ||
132 | par->board->set_ctl(par, BS_CS, 0); | ||
133 | par->board->set_ctl(par, BS_WR, 0); | ||
134 | |||
135 | res = par->board->get_hdb(par); | ||
136 | |||
137 | /* strobe wr */ | ||
138 | par->board->set_ctl(par, BS_WR, 1); | ||
139 | par->board->set_ctl(par, BS_CS, 1); | ||
140 | |||
141 | return res; | ||
142 | } | ||
143 | |||
144 | static void broadsheet_write_reg(struct broadsheetfb_par *par, u16 reg, | ||
145 | u16 data) | ||
146 | { | ||
147 | /* wait for ready to go hi. (lo is busy) */ | ||
148 | par->board->wait_for_rdy(par); | ||
149 | |||
150 | /* cs lo, dc lo for cmd, we lo for each data, db as usual */ | ||
151 | par->board->set_ctl(par, BS_CS, 0); | ||
152 | |||
153 | broadsheet_issue_cmd(par, BS_CMD_WR_REG); | ||
154 | |||
155 | par->board->set_ctl(par, BS_DC, 1); | ||
156 | |||
157 | broadsheet_issue_data(par, reg); | ||
158 | broadsheet_issue_data(par, data); | ||
159 | |||
160 | par->board->set_ctl(par, BS_CS, 1); | ||
161 | } | ||
162 | |||
163 | static u16 broadsheet_read_reg(struct broadsheetfb_par *par, u16 reg) | ||
164 | { | ||
165 | broadsheet_send_command(par, reg); | ||
166 | msleep(100); | ||
167 | return broadsheet_get_data(par); | ||
168 | } | ||
169 | |||
170 | static void __devinit broadsheet_init_display(struct broadsheetfb_par *par) | ||
171 | { | ||
172 | u16 args[5]; | ||
173 | |||
174 | args[0] = DPY_W; | ||
175 | args[1] = DPY_H; | ||
176 | args[2] = (100 | (1 << 8) | (1 << 9)); /* sdcfg */ | ||
177 | args[3] = 2; /* gdrv cfg */ | ||
178 | args[4] = (4 | (1 << 7)); /* lut index format */ | ||
179 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args); | ||
180 | |||
181 | /* did the controller really set it? */ | ||
182 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_CFG, 5, args); | ||
183 | |||
184 | args[0] = 4; /* fsync len */ | ||
185 | args[1] = (10 << 8) | 4; /* fend/fbegin len */ | ||
186 | args[2] = 10; /* line sync len */ | ||
187 | args[3] = (100 << 8) | 4; /* line end/begin len */ | ||
188 | args[4] = 6; /* pixel clock cfg */ | ||
189 | broadsheet_send_cmdargs(par, BS_CMD_INIT_DSPE_TMG, 5, args); | ||
190 | |||
191 | /* setup waveform */ | ||
192 | args[0] = 0x886; | ||
193 | args[1] = 0; | ||
194 | broadsheet_send_cmdargs(par, BS_CMD_RD_WFM_INFO, 2, args); | ||
195 | |||
196 | broadsheet_send_command(par, BS_CMD_UPD_GDRV_CLR); | ||
197 | |||
198 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
199 | |||
200 | broadsheet_write_reg(par, 0x330, 0x84); | ||
201 | |||
202 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
203 | |||
204 | args[0] = (0x3 << 4); | ||
205 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args); | ||
206 | |||
207 | args[0] = 0x154; | ||
208 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
209 | |||
210 | broadsheet_burst_write(par, DPY_W*DPY_H/2, | ||
211 | (u16 *) par->info->screen_base); | ||
212 | |||
213 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
214 | |||
215 | args[0] = 0x4300; | ||
216 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
217 | |||
218 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
219 | |||
220 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
221 | |||
222 | par->board->wait_for_rdy(par); | ||
223 | } | ||
224 | |||
225 | static void __devinit broadsheet_init(struct broadsheetfb_par *par) | ||
226 | { | ||
227 | broadsheet_send_command(par, BS_CMD_INIT_SYS_RUN); | ||
228 | /* the controller needs a second */ | ||
229 | msleep(1000); | ||
230 | broadsheet_init_display(par); | ||
231 | } | ||
232 | |||
233 | static void broadsheetfb_dpy_update_pages(struct broadsheetfb_par *par, | ||
234 | u16 y1, u16 y2) | ||
235 | { | ||
236 | u16 args[5]; | ||
237 | unsigned char *buf = (unsigned char *)par->info->screen_base; | ||
238 | |||
239 | /* y1 must be a multiple of 4 so drop the lower bits */ | ||
240 | y1 &= 0xFFFC; | ||
241 | /* y2 must be a multiple of 4 , but - 1 so up the lower bits */ | ||
242 | y2 |= 0x0003; | ||
243 | |||
244 | args[0] = 0x3 << 4; | ||
245 | args[1] = 0; | ||
246 | args[2] = y1; | ||
247 | args[3] = cpu_to_le16(par->info->var.xres); | ||
248 | args[4] = y2; | ||
249 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG_AREA, 5, args); | ||
250 | |||
251 | args[0] = 0x154; | ||
252 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
253 | |||
254 | buf += y1 * par->info->var.xres; | ||
255 | broadsheet_burst_write(par, ((1 + y2 - y1) * par->info->var.xres)/2, | ||
256 | (u16 *) buf); | ||
257 | |||
258 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
259 | |||
260 | args[0] = 0x4300; | ||
261 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
262 | |||
263 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
264 | |||
265 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
266 | |||
267 | par->board->wait_for_rdy(par); | ||
268 | |||
269 | } | ||
270 | |||
271 | static void broadsheetfb_dpy_update(struct broadsheetfb_par *par) | ||
272 | { | ||
273 | u16 args[5]; | ||
274 | |||
275 | args[0] = 0x3 << 4; | ||
276 | broadsheet_send_cmdargs(par, BS_CMD_LD_IMG, 1, args); | ||
277 | |||
278 | args[0] = 0x154; | ||
279 | broadsheet_send_cmdargs(par, BS_CMD_WR_REG, 1, args); | ||
280 | broadsheet_burst_write(par, DPY_W*DPY_H/2, | ||
281 | (u16 *) par->info->screen_base); | ||
282 | |||
283 | broadsheet_send_command(par, BS_CMD_LD_IMG_END); | ||
284 | |||
285 | args[0] = 0x4300; | ||
286 | broadsheet_send_cmdargs(par, BS_CMD_UPD_FULL, 1, args); | ||
287 | |||
288 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_TRG); | ||
289 | |||
290 | broadsheet_send_command(par, BS_CMD_WAIT_DSPE_FREND); | ||
291 | |||
292 | par->board->wait_for_rdy(par); | ||
293 | |||
294 | } | ||
295 | |||
296 | /* this is called back from the deferred io workqueue */ | ||
297 | static void broadsheetfb_dpy_deferred_io(struct fb_info *info, | ||
298 | struct list_head *pagelist) | ||
299 | { | ||
300 | u16 y1 = 0, h = 0; | ||
301 | int prev_index = -1; | ||
302 | struct page *cur; | ||
303 | struct fb_deferred_io *fbdefio = info->fbdefio; | ||
304 | int h_inc; | ||
305 | u16 yres = info->var.yres; | ||
306 | u16 xres = info->var.xres; | ||
307 | |||
308 | /* height increment is fixed per page */ | ||
309 | h_inc = DIV_ROUND_UP(PAGE_SIZE , xres); | ||
310 | |||
311 | /* walk the written page list and swizzle the data */ | ||
312 | list_for_each_entry(cur, &fbdefio->pagelist, lru) { | ||
313 | if (prev_index < 0) { | ||
314 | /* just starting so assign first page */ | ||
315 | y1 = (cur->index << PAGE_SHIFT) / xres; | ||
316 | h = h_inc; | ||
317 | } else if ((prev_index + 1) == cur->index) { | ||
318 | /* this page is consecutive so increase our height */ | ||
319 | h += h_inc; | ||
320 | } else { | ||
321 | /* page not consecutive, issue previous update first */ | ||
322 | broadsheetfb_dpy_update_pages(info->par, y1, y1 + h); | ||
323 | /* start over with our non consecutive page */ | ||
324 | y1 = (cur->index << PAGE_SHIFT) / xres; | ||
325 | h = h_inc; | ||
326 | } | ||
327 | prev_index = cur->index; | ||
328 | } | ||
329 | |||
330 | /* if we still have any pages to update we do so now */ | ||
331 | if (h >= yres) { | ||
332 | /* its a full screen update, just do it */ | ||
333 | broadsheetfb_dpy_update(info->par); | ||
334 | } else { | ||
335 | broadsheetfb_dpy_update_pages(info->par, y1, | ||
336 | min((u16) (y1 + h), yres)); | ||
337 | } | ||
338 | } | ||
339 | |||
340 | static void broadsheetfb_fillrect(struct fb_info *info, | ||
341 | const struct fb_fillrect *rect) | ||
342 | { | ||
343 | struct broadsheetfb_par *par = info->par; | ||
344 | |||
345 | sys_fillrect(info, rect); | ||
346 | |||
347 | broadsheetfb_dpy_update(par); | ||
348 | } | ||
349 | |||
350 | static void broadsheetfb_copyarea(struct fb_info *info, | ||
351 | const struct fb_copyarea *area) | ||
352 | { | ||
353 | struct broadsheetfb_par *par = info->par; | ||
354 | |||
355 | sys_copyarea(info, area); | ||
356 | |||
357 | broadsheetfb_dpy_update(par); | ||
358 | } | ||
359 | |||
360 | static void broadsheetfb_imageblit(struct fb_info *info, | ||
361 | const struct fb_image *image) | ||
362 | { | ||
363 | struct broadsheetfb_par *par = info->par; | ||
364 | |||
365 | sys_imageblit(info, image); | ||
366 | |||
367 | broadsheetfb_dpy_update(par); | ||
368 | } | ||
369 | |||
370 | /* | ||
371 | * this is the slow path from userspace. they can seek and write to | ||
372 | * the fb. it's inefficient to do anything less than a full screen draw | ||
373 | */ | ||
374 | static ssize_t broadsheetfb_write(struct fb_info *info, const char __user *buf, | ||
375 | size_t count, loff_t *ppos) | ||
376 | { | ||
377 | struct broadsheetfb_par *par = info->par; | ||
378 | unsigned long p = *ppos; | ||
379 | void *dst; | ||
380 | int err = 0; | ||
381 | unsigned long total_size; | ||
382 | |||
383 | if (info->state != FBINFO_STATE_RUNNING) | ||
384 | return -EPERM; | ||
385 | |||
386 | total_size = info->fix.smem_len; | ||
387 | |||
388 | if (p > total_size) | ||
389 | return -EFBIG; | ||
390 | |||
391 | if (count > total_size) { | ||
392 | err = -EFBIG; | ||
393 | count = total_size; | ||
394 | } | ||
395 | |||
396 | if (count + p > total_size) { | ||
397 | if (!err) | ||
398 | err = -ENOSPC; | ||
399 | |||
400 | count = total_size - p; | ||
401 | } | ||
402 | |||
403 | dst = (void *)(info->screen_base + p); | ||
404 | |||
405 | if (copy_from_user(dst, buf, count)) | ||
406 | err = -EFAULT; | ||
407 | |||
408 | if (!err) | ||
409 | *ppos += count; | ||
410 | |||
411 | broadsheetfb_dpy_update(par); | ||
412 | |||
413 | return (err) ? err : count; | ||
414 | } | ||
415 | |||
416 | static struct fb_ops broadsheetfb_ops = { | ||
417 | .owner = THIS_MODULE, | ||
418 | .fb_read = fb_sys_read, | ||
419 | .fb_write = broadsheetfb_write, | ||
420 | .fb_fillrect = broadsheetfb_fillrect, | ||
421 | .fb_copyarea = broadsheetfb_copyarea, | ||
422 | .fb_imageblit = broadsheetfb_imageblit, | ||
423 | }; | ||
424 | |||
425 | static struct fb_deferred_io broadsheetfb_defio = { | ||
426 | .delay = HZ/4, | ||
427 | .deferred_io = broadsheetfb_dpy_deferred_io, | ||
428 | }; | ||
429 | |||
430 | static int __devinit broadsheetfb_probe(struct platform_device *dev) | ||
431 | { | ||
432 | struct fb_info *info; | ||
433 | struct broadsheet_board *board; | ||
434 | int retval = -ENOMEM; | ||
435 | int videomemorysize; | ||
436 | unsigned char *videomemory; | ||
437 | struct broadsheetfb_par *par; | ||
438 | int i; | ||
439 | |||
440 | /* pick up board specific routines */ | ||
441 | board = dev->dev.platform_data; | ||
442 | if (!board) | ||
443 | return -EINVAL; | ||
444 | |||
445 | /* try to count device specific driver, if can't, platform recalls */ | ||
446 | if (!try_module_get(board->owner)) | ||
447 | return -ENODEV; | ||
448 | |||
449 | info = framebuffer_alloc(sizeof(struct broadsheetfb_par), &dev->dev); | ||
450 | if (!info) | ||
451 | goto err; | ||
452 | |||
453 | videomemorysize = (DPY_W*DPY_H); | ||
454 | videomemory = vmalloc(videomemorysize); | ||
455 | if (!videomemory) | ||
456 | goto err_fb_rel; | ||
457 | |||
458 | memset(videomemory, 0, videomemorysize); | ||
459 | |||
460 | info->screen_base = (char *)videomemory; | ||
461 | info->fbops = &broadsheetfb_ops; | ||
462 | |||
463 | info->var = broadsheetfb_var; | ||
464 | info->fix = broadsheetfb_fix; | ||
465 | info->fix.smem_len = videomemorysize; | ||
466 | par = info->par; | ||
467 | par->info = info; | ||
468 | par->board = board; | ||
469 | par->write_reg = broadsheet_write_reg; | ||
470 | par->read_reg = broadsheet_read_reg; | ||
471 | init_waitqueue_head(&par->waitq); | ||
472 | |||
473 | info->flags = FBINFO_FLAG_DEFAULT; | ||
474 | |||
475 | info->fbdefio = &broadsheetfb_defio; | ||
476 | fb_deferred_io_init(info); | ||
477 | |||
478 | retval = fb_alloc_cmap(&info->cmap, 16, 0); | ||
479 | if (retval < 0) { | ||
480 | dev_err(&dev->dev, "Failed to allocate colormap\n"); | ||
481 | goto err_vfree; | ||
482 | } | ||
483 | |||
484 | /* set cmap */ | ||
485 | for (i = 0; i < 16; i++) | ||
486 | info->cmap.red[i] = (((2*i)+1)*(0xFFFF))/32; | ||
487 | memcpy(info->cmap.green, info->cmap.red, sizeof(u16)*16); | ||
488 | memcpy(info->cmap.blue, info->cmap.red, sizeof(u16)*16); | ||
489 | |||
490 | retval = par->board->setup_irq(info); | ||
491 | if (retval < 0) | ||
492 | goto err_cmap; | ||
493 | |||
494 | /* this inits the dpy */ | ||
495 | retval = board->init(par); | ||
496 | if (retval < 0) | ||
497 | goto err_free_irq; | ||
498 | |||
499 | broadsheet_init(par); | ||
500 | |||
501 | retval = register_framebuffer(info); | ||
502 | if (retval < 0) | ||
503 | goto err_free_irq; | ||
504 | platform_set_drvdata(dev, info); | ||
505 | |||
506 | printk(KERN_INFO | ||
507 | "fb%d: Broadsheet frame buffer, using %dK of video memory\n", | ||
508 | info->node, videomemorysize >> 10); | ||
509 | |||
510 | |||
511 | return 0; | ||
512 | |||
513 | err_free_irq: | ||
514 | board->cleanup(par); | ||
515 | err_cmap: | ||
516 | fb_dealloc_cmap(&info->cmap); | ||
517 | err_vfree: | ||
518 | vfree(videomemory); | ||
519 | err_fb_rel: | ||
520 | framebuffer_release(info); | ||
521 | err: | ||
522 | module_put(board->owner); | ||
523 | return retval; | ||
524 | |||
525 | } | ||
526 | |||
527 | static int __devexit broadsheetfb_remove(struct platform_device *dev) | ||
528 | { | ||
529 | struct fb_info *info = platform_get_drvdata(dev); | ||
530 | |||
531 | if (info) { | ||
532 | struct broadsheetfb_par *par = info->par; | ||
533 | unregister_framebuffer(info); | ||
534 | fb_deferred_io_cleanup(info); | ||
535 | par->board->cleanup(par); | ||
536 | fb_dealloc_cmap(&info->cmap); | ||
537 | vfree((void *)info->screen_base); | ||
538 | module_put(par->board->owner); | ||
539 | framebuffer_release(info); | ||
540 | } | ||
541 | return 0; | ||
542 | } | ||
543 | |||
544 | static struct platform_driver broadsheetfb_driver = { | ||
545 | .probe = broadsheetfb_probe, | ||
546 | .remove = broadsheetfb_remove, | ||
547 | .driver = { | ||
548 | .owner = THIS_MODULE, | ||
549 | .name = "broadsheetfb", | ||
550 | }, | ||
551 | }; | ||
552 | |||
553 | static int __init broadsheetfb_init(void) | ||
554 | { | ||
555 | return platform_driver_register(&broadsheetfb_driver); | ||
556 | } | ||
557 | |||
558 | static void __exit broadsheetfb_exit(void) | ||
559 | { | ||
560 | platform_driver_unregister(&broadsheetfb_driver); | ||
561 | } | ||
562 | |||
563 | module_init(broadsheetfb_init); | ||
564 | module_exit(broadsheetfb_exit); | ||
565 | |||
566 | MODULE_DESCRIPTION("fbdev driver for Broadsheet controller"); | ||
567 | MODULE_AUTHOR("Jaya Kumar"); | ||
568 | MODULE_LICENSE("GPL"); | ||
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/cyber2000fb.c index 7a9e42e3a9a..83c5cefc266 100644 --- a/drivers/video/cyber2000fb.c +++ b/drivers/video/cyber2000fb.c | |||
@@ -46,8 +46,8 @@ | |||
46 | #include <linux/fb.h> | 46 | #include <linux/fb.h> |
47 | #include <linux/pci.h> | 47 | #include <linux/pci.h> |
48 | #include <linux/init.h> | 48 | #include <linux/init.h> |
49 | #include <linux/io.h> | ||
49 | 50 | ||
50 | #include <asm/io.h> | ||
51 | #include <asm/pgtable.h> | 51 | #include <asm/pgtable.h> |
52 | #include <asm/system.h> | 52 | #include <asm/system.h> |
53 | 53 | ||
@@ -1425,7 +1425,7 @@ static void cyberpro_common_resume(struct cfb_info *cfb) | |||
1425 | 1425 | ||
1426 | #ifdef CONFIG_ARCH_SHARK | 1426 | #ifdef CONFIG_ARCH_SHARK |
1427 | 1427 | ||
1428 | #include <mach/hardware.h> | 1428 | #include <mach/framebuffer.h> |
1429 | 1429 | ||
1430 | static int __devinit cyberpro_vl_probe(void) | 1430 | static int __devinit cyberpro_vl_probe(void) |
1431 | { | 1431 | { |
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c index d58c68cd456..15a0ee6d8e2 100644 --- a/drivers/video/imxfb.c +++ b/drivers/video/imxfb.c | |||
@@ -14,7 +14,6 @@ | |||
14 | * linux-arm-kernel@lists.arm.linux.org.uk | 14 | * linux-arm-kernel@lists.arm.linux.org.uk |
15 | */ | 15 | */ |
16 | 16 | ||
17 | |||
18 | #include <linux/module.h> | 17 | #include <linux/module.h> |
19 | #include <linux/kernel.h> | 18 | #include <linux/kernel.h> |
20 | #include <linux/errno.h> | 19 | #include <linux/errno.h> |
@@ -27,9 +26,11 @@ | |||
27 | #include <linux/init.h> | 26 | #include <linux/init.h> |
28 | #include <linux/ioport.h> | 27 | #include <linux/ioport.h> |
29 | #include <linux/cpufreq.h> | 28 | #include <linux/cpufreq.h> |
29 | #include <linux/clk.h> | ||
30 | #include <linux/platform_device.h> | 30 | #include <linux/platform_device.h> |
31 | #include <linux/dma-mapping.h> | 31 | #include <linux/dma-mapping.h> |
32 | #include <linux/io.h> | 32 | #include <linux/io.h> |
33 | #include <linux/math64.h> | ||
33 | 34 | ||
34 | #include <mach/imxfb.h> | 35 | #include <mach/imxfb.h> |
35 | 36 | ||
@@ -44,7 +45,12 @@ | |||
44 | 45 | ||
45 | #define LCDC_SIZE 0x04 | 46 | #define LCDC_SIZE 0x04 |
46 | #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) | 47 | #define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) |
48 | |||
49 | #ifdef CONFIG_ARCH_MX1 | ||
47 | #define SIZE_YMAX(y) ((y) & 0x1ff) | 50 | #define SIZE_YMAX(y) ((y) & 0x1ff) |
51 | #else | ||
52 | #define SIZE_YMAX(y) ((y) & 0x3ff) | ||
53 | #endif | ||
48 | 54 | ||
49 | #define LCDC_VPW 0x08 | 55 | #define LCDC_VPW 0x08 |
50 | #define VPW_VPW(x) ((x) & 0x3ff) | 56 | #define VPW_VPW(x) ((x) & 0x3ff) |
@@ -54,7 +60,12 @@ | |||
54 | #define CPOS_CC0 (1<<30) | 60 | #define CPOS_CC0 (1<<30) |
55 | #define CPOS_OP (1<<28) | 61 | #define CPOS_OP (1<<28) |
56 | #define CPOS_CXP(x) (((x) & 3ff) << 16) | 62 | #define CPOS_CXP(x) (((x) & 3ff) << 16) |
63 | |||
64 | #ifdef CONFIG_ARCH_MX1 | ||
57 | #define CPOS_CYP(y) ((y) & 0x1ff) | 65 | #define CPOS_CYP(y) ((y) & 0x1ff) |
66 | #else | ||
67 | #define CPOS_CYP(y) ((y) & 0x3ff) | ||
68 | #endif | ||
58 | 69 | ||
59 | #define LCDC_LCWHB 0x10 | 70 | #define LCDC_LCWHB 0x10 |
60 | #define LCWHB_BK_EN (1<<31) | 71 | #define LCWHB_BK_EN (1<<31) |
@@ -63,9 +74,16 @@ | |||
63 | #define LCWHB_BD(x) ((x) & 0xff) | 74 | #define LCWHB_BD(x) ((x) & 0xff) |
64 | 75 | ||
65 | #define LCDC_LCHCC 0x14 | 76 | #define LCDC_LCHCC 0x14 |
77 | |||
78 | #ifdef CONFIG_ARCH_MX1 | ||
66 | #define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) | 79 | #define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) |
67 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) | 80 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) |
68 | #define LCHCC_CUR_COL_B(b) ((b) & 0x1f) | 81 | #define LCHCC_CUR_COL_B(b) ((b) & 0x1f) |
82 | #else | ||
83 | #define LCHCC_CUR_COL_R(r) (((r) & 0x3f) << 12) | ||
84 | #define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 6) | ||
85 | #define LCHCC_CUR_COL_B(b) ((b) & 0x3f) | ||
86 | #endif | ||
69 | 87 | ||
70 | #define LCDC_PCR 0x18 | 88 | #define LCDC_PCR 0x18 |
71 | 89 | ||
@@ -92,7 +110,13 @@ | |||
92 | /* bit fields in imxfb.h */ | 110 | /* bit fields in imxfb.h */ |
93 | 111 | ||
94 | #define LCDC_RMCR 0x34 | 112 | #define LCDC_RMCR 0x34 |
113 | |||
114 | #ifdef CONFIG_ARCH_MX1 | ||
95 | #define RMCR_LCDC_EN (1<<1) | 115 | #define RMCR_LCDC_EN (1<<1) |
116 | #else | ||
117 | #define RMCR_LCDC_EN 0 | ||
118 | #endif | ||
119 | |||
96 | #define RMCR_SELF_REF (1<<0) | 120 | #define RMCR_SELF_REF (1<<0) |
97 | 121 | ||
98 | #define LCDC_LCDICR 0x38 | 122 | #define LCDC_LCDICR 0x38 |
@@ -119,6 +143,7 @@ struct imxfb_rgb { | |||
119 | struct imxfb_info { | 143 | struct imxfb_info { |
120 | struct platform_device *pdev; | 144 | struct platform_device *pdev; |
121 | void __iomem *regs; | 145 | void __iomem *regs; |
146 | struct clk *clk; | ||
122 | 147 | ||
123 | u_int max_bpp; | 148 | u_int max_bpp; |
124 | u_int max_xres; | 149 | u_int max_xres; |
@@ -159,6 +184,17 @@ struct imxfb_info { | |||
159 | #define MIN_XRES 64 | 184 | #define MIN_XRES 64 |
160 | #define MIN_YRES 64 | 185 | #define MIN_YRES 64 |
161 | 186 | ||
187 | /* Actually this really is 18bit support, the lowest 2 bits of each colour | ||
188 | * are unused in hardware. We claim to have 24bit support to make software | ||
189 | * like X work, which does not support 18bit. | ||
190 | */ | ||
191 | static struct imxfb_rgb def_rgb_18 = { | ||
192 | .red = {.offset = 16, .length = 8,}, | ||
193 | .green = {.offset = 8, .length = 8,}, | ||
194 | .blue = {.offset = 0, .length = 8,}, | ||
195 | .transp = {.offset = 0, .length = 0,}, | ||
196 | }; | ||
197 | |||
162 | static struct imxfb_rgb def_rgb_16_tft = { | 198 | static struct imxfb_rgb def_rgb_16_tft = { |
163 | .red = {.offset = 11, .length = 5,}, | 199 | .red = {.offset = 11, .length = 5,}, |
164 | .green = {.offset = 5, .length = 6,}, | 200 | .green = {.offset = 5, .length = 6,}, |
@@ -286,9 +322,12 @@ static int imxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) | |||
286 | 322 | ||
287 | pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); | 323 | pr_debug("var->bits_per_pixel=%d\n", var->bits_per_pixel); |
288 | switch (var->bits_per_pixel) { | 324 | switch (var->bits_per_pixel) { |
325 | case 32: | ||
326 | rgb = &def_rgb_18; | ||
327 | break; | ||
289 | case 16: | 328 | case 16: |
290 | default: | 329 | default: |
291 | if (readl(fbi->regs + LCDC_PCR) & PCR_TFT) | 330 | if (fbi->pcr & PCR_TFT) |
292 | rgb = &def_rgb_16_tft; | 331 | rgb = &def_rgb_16_tft; |
293 | else | 332 | else |
294 | rgb = &def_rgb_16_stn; | 333 | rgb = &def_rgb_16_stn; |
@@ -327,9 +366,7 @@ static int imxfb_set_par(struct fb_info *info) | |||
327 | struct imxfb_info *fbi = info->par; | 366 | struct imxfb_info *fbi = info->par; |
328 | struct fb_var_screeninfo *var = &info->var; | 367 | struct fb_var_screeninfo *var = &info->var; |
329 | 368 | ||
330 | pr_debug("set_par\n"); | 369 | if (var->bits_per_pixel == 16 || var->bits_per_pixel == 32) |
331 | |||
332 | if (var->bits_per_pixel == 16) | ||
333 | info->fix.visual = FB_VISUAL_TRUECOLOR; | 370 | info->fix.visual = FB_VISUAL_TRUECOLOR; |
334 | else if (!fbi->cmap_static) | 371 | else if (!fbi->cmap_static) |
335 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; | 372 | info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
@@ -354,10 +391,6 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) | |||
354 | { | 391 | { |
355 | pr_debug("Enabling LCD controller\n"); | 392 | pr_debug("Enabling LCD controller\n"); |
356 | 393 | ||
357 | /* initialize LCDC */ | ||
358 | writel(readl(fbi->regs + LCDC_RMCR) & ~RMCR_LCDC_EN, | ||
359 | fbi->regs + LCDC_RMCR); /* just to be safe... */ | ||
360 | |||
361 | writel(fbi->screen_dma, fbi->regs + LCDC_SSA); | 394 | writel(fbi->screen_dma, fbi->regs + LCDC_SSA); |
362 | 395 | ||
363 | /* physical screen start address */ | 396 | /* physical screen start address */ |
@@ -373,6 +406,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi) | |||
373 | 406 | ||
374 | writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); | 407 | writel(RMCR_LCDC_EN, fbi->regs + LCDC_RMCR); |
375 | 408 | ||
409 | clk_enable(fbi->clk); | ||
410 | |||
376 | if (fbi->backlight_power) | 411 | if (fbi->backlight_power) |
377 | fbi->backlight_power(1); | 412 | fbi->backlight_power(1); |
378 | if (fbi->lcd_power) | 413 | if (fbi->lcd_power) |
@@ -388,6 +423,8 @@ static void imxfb_disable_controller(struct imxfb_info *fbi) | |||
388 | if (fbi->lcd_power) | 423 | if (fbi->lcd_power) |
389 | fbi->lcd_power(0); | 424 | fbi->lcd_power(0); |
390 | 425 | ||
426 | clk_disable(fbi->clk); | ||
427 | |||
391 | writel(0, fbi->regs + LCDC_RMCR); | 428 | writel(0, fbi->regs + LCDC_RMCR); |
392 | } | 429 | } |
393 | 430 | ||
@@ -431,6 +468,9 @@ static struct fb_ops imxfb_ops = { | |||
431 | static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) | 468 | static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *info) |
432 | { | 469 | { |
433 | struct imxfb_info *fbi = info->par; | 470 | struct imxfb_info *fbi = info->par; |
471 | unsigned int pcr, lcd_clk; | ||
472 | unsigned long long tmp; | ||
473 | |||
434 | pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", | 474 | pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n", |
435 | var->xres, var->hsync_len, | 475 | var->xres, var->hsync_len, |
436 | var->left_margin, var->right_margin); | 476 | var->left_margin, var->right_margin); |
@@ -465,9 +505,9 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf | |||
465 | info->fix.id, var->lower_margin); | 505 | info->fix.id, var->lower_margin); |
466 | #endif | 506 | #endif |
467 | 507 | ||
468 | writel(HCR_H_WIDTH(var->hsync_len) | | 508 | writel(HCR_H_WIDTH(var->hsync_len - 1) | |
469 | HCR_H_WAIT_1(var->right_margin) | | 509 | HCR_H_WAIT_1(var->right_margin - 1) | |
470 | HCR_H_WAIT_2(var->left_margin), | 510 | HCR_H_WAIT_2(var->left_margin - 3), |
471 | fbi->regs + LCDC_HCR); | 511 | fbi->regs + LCDC_HCR); |
472 | 512 | ||
473 | writel(VCR_V_WIDTH(var->vsync_len) | | 513 | writel(VCR_V_WIDTH(var->vsync_len) | |
@@ -477,7 +517,23 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf | |||
477 | 517 | ||
478 | writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), | 518 | writel(SIZE_XMAX(var->xres) | SIZE_YMAX(var->yres), |
479 | fbi->regs + LCDC_SIZE); | 519 | fbi->regs + LCDC_SIZE); |
480 | writel(fbi->pcr, fbi->regs + LCDC_PCR); | 520 | |
521 | lcd_clk = clk_get_rate(fbi->clk); | ||
522 | tmp = var->pixclock * (unsigned long long)lcd_clk; | ||
523 | do_div(tmp, 1000000); | ||
524 | if (do_div(tmp, 1000000) > 500000) | ||
525 | tmp++; | ||
526 | pcr = (unsigned int)tmp; | ||
527 | if (--pcr > 0x3F) { | ||
528 | pcr = 0x3F; | ||
529 | printk(KERN_WARNING "Must limit pixel clock to %uHz\n", | ||
530 | lcd_clk / pcr); | ||
531 | } | ||
532 | |||
533 | /* add sync polarities */ | ||
534 | pcr |= fbi->pcr & ~0x3F; | ||
535 | |||
536 | writel(pcr, fbi->regs + LCDC_PCR); | ||
481 | writel(fbi->pwmr, fbi->regs + LCDC_PWMR); | 537 | writel(fbi->pwmr, fbi->regs + LCDC_PWMR); |
482 | writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); | 538 | writel(fbi->lscr1, fbi->regs + LCDC_LSCR1); |
483 | writel(fbi->dmacr, fbi->regs + LCDC_DMACR); | 539 | writel(fbi->dmacr, fbi->regs + LCDC_DMACR); |
@@ -619,6 +675,13 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
619 | goto failed_req; | 675 | goto failed_req; |
620 | } | 676 | } |
621 | 677 | ||
678 | fbi->clk = clk_get(&pdev->dev, NULL); | ||
679 | if (IS_ERR(fbi->clk)) { | ||
680 | ret = PTR_ERR(fbi->clk);; | ||
681 | dev_err(&pdev->dev, "unable to get clock: %d\n", ret); | ||
682 | goto failed_getclock; | ||
683 | } | ||
684 | |||
622 | fbi->regs = ioremap(res->start, resource_size(res)); | 685 | fbi->regs = ioremap(res->start, resource_size(res)); |
623 | if (fbi->regs == NULL) { | 686 | if (fbi->regs == NULL) { |
624 | printk(KERN_ERR"Cannot map frame buffer registers\n"); | 687 | printk(KERN_ERR"Cannot map frame buffer registers\n"); |
@@ -650,6 +713,12 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
650 | info->fix.smem_start = fbi->screen_dma; | 713 | info->fix.smem_start = fbi->screen_dma; |
651 | } | 714 | } |
652 | 715 | ||
716 | if (pdata->init) { | ||
717 | ret = pdata->init(fbi->pdev); | ||
718 | if (ret) | ||
719 | goto failed_platform_init; | ||
720 | } | ||
721 | |||
653 | /* | 722 | /* |
654 | * This makes sure that our colour bitfield | 723 | * This makes sure that our colour bitfield |
655 | * descriptors are correctly initialised. | 724 | * descriptors are correctly initialised. |
@@ -674,10 +743,15 @@ static int __init imxfb_probe(struct platform_device *pdev) | |||
674 | failed_register: | 743 | failed_register: |
675 | fb_dealloc_cmap(&info->cmap); | 744 | fb_dealloc_cmap(&info->cmap); |
676 | failed_cmap: | 745 | failed_cmap: |
746 | if (pdata->exit) | ||
747 | pdata->exit(fbi->pdev); | ||
748 | failed_platform_init: | ||
677 | if (!pdata->fixed_screen_cpu) | 749 | if (!pdata->fixed_screen_cpu) |
678 | dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, | 750 | dma_free_writecombine(&pdev->dev,fbi->map_size,fbi->map_cpu, |
679 | fbi->map_dma); | 751 | fbi->map_dma); |
680 | failed_map: | 752 | failed_map: |
753 | clk_put(fbi->clk); | ||
754 | failed_getclock: | ||
681 | iounmap(fbi->regs); | 755 | iounmap(fbi->regs); |
682 | failed_ioremap: | 756 | failed_ioremap: |
683 | release_mem_region(res->start, res->end - res->start); | 757 | release_mem_region(res->start, res->end - res->start); |
@@ -691,6 +765,7 @@ failed_init: | |||
691 | 765 | ||
692 | static int __devexit imxfb_remove(struct platform_device *pdev) | 766 | static int __devexit imxfb_remove(struct platform_device *pdev) |
693 | { | 767 | { |
768 | struct imx_fb_platform_data *pdata; | ||
694 | struct fb_info *info = platform_get_drvdata(pdev); | 769 | struct fb_info *info = platform_get_drvdata(pdev); |
695 | struct imxfb_info *fbi = info->par; | 770 | struct imxfb_info *fbi = info->par; |
696 | struct resource *res; | 771 | struct resource *res; |
@@ -701,12 +776,19 @@ static int __devexit imxfb_remove(struct platform_device *pdev) | |||
701 | 776 | ||
702 | unregister_framebuffer(info); | 777 | unregister_framebuffer(info); |
703 | 778 | ||
779 | pdata = pdev->dev.platform_data; | ||
780 | if (pdata->exit) | ||
781 | pdata->exit(fbi->pdev); | ||
782 | |||
704 | fb_dealloc_cmap(&info->cmap); | 783 | fb_dealloc_cmap(&info->cmap); |
705 | kfree(info->pseudo_palette); | 784 | kfree(info->pseudo_palette); |
706 | framebuffer_release(info); | 785 | framebuffer_release(info); |
707 | 786 | ||
708 | iounmap(fbi->regs); | 787 | iounmap(fbi->regs); |
709 | release_mem_region(res->start, res->end - res->start + 1); | 788 | release_mem_region(res->start, res->end - res->start + 1); |
789 | clk_disable(fbi->clk); | ||
790 | clk_put(fbi->clk); | ||
791 | |||
710 | platform_set_drvdata(pdev, NULL); | 792 | platform_set_drvdata(pdev, NULL); |
711 | 793 | ||
712 | return 0; | 794 | return 0; |
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 8a75d05f433..fa1a512ce03 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c | |||
@@ -34,240 +34,240 @@ | |||
34 | #include <asm/io.h> | 34 | #include <asm/io.h> |
35 | #include <asm/uaccess.h> | 35 | #include <asm/uaccess.h> |
36 | 36 | ||
37 | #define MX3FB_NAME "mx3_sdc_fb" | 37 | #define MX3FB_NAME "mx3_sdc_fb" |
38 | 38 | ||
39 | #define MX3FB_REG_OFFSET 0xB4 | 39 | #define MX3FB_REG_OFFSET 0xB4 |
40 | 40 | ||
41 | /* SDC Registers */ | 41 | /* SDC Registers */ |
42 | #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) | 42 | #define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) |
43 | #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) | 43 | #define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) |
44 | #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) | 44 | #define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) |
45 | #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) | 45 | #define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) |
46 | #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) | 46 | #define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) |
47 | #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) | 47 | #define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) |
48 | #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) | 48 | #define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) |
49 | #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) | 49 | #define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) |
50 | #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) | 50 | #define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) |
51 | #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) | 51 | #define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) |
52 | #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) | 52 | #define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) |
53 | 53 | ||
54 | /* Register bits */ | 54 | /* Register bits */ |
55 | #define SDC_COM_TFT_COLOR 0x00000001UL | 55 | #define SDC_COM_TFT_COLOR 0x00000001UL |
56 | #define SDC_COM_FG_EN 0x00000010UL | 56 | #define SDC_COM_FG_EN 0x00000010UL |
57 | #define SDC_COM_GWSEL 0x00000020UL | 57 | #define SDC_COM_GWSEL 0x00000020UL |
58 | #define SDC_COM_GLB_A 0x00000040UL | 58 | #define SDC_COM_GLB_A 0x00000040UL |
59 | #define SDC_COM_KEY_COLOR_G 0x00000080UL | 59 | #define SDC_COM_KEY_COLOR_G 0x00000080UL |
60 | #define SDC_COM_BG_EN 0x00000200UL | 60 | #define SDC_COM_BG_EN 0x00000200UL |
61 | #define SDC_COM_SHARP 0x00001000UL | 61 | #define SDC_COM_SHARP 0x00001000UL |
62 | 62 | ||
63 | #define SDC_V_SYNC_WIDTH_L 0x00000001UL | 63 | #define SDC_V_SYNC_WIDTH_L 0x00000001UL |
64 | 64 | ||
65 | /* Display Interface registers */ | 65 | /* Display Interface registers */ |
66 | #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) | 66 | #define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) |
67 | #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) | 67 | #define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) |
68 | #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) | 68 | #define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) |
69 | #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) | 69 | #define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) |
70 | #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) | 70 | #define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) |
71 | #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) | 71 | #define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) |
72 | #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) | 72 | #define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) |
73 | #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) | 73 | #define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) |
74 | #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) | 74 | #define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) |
75 | #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) | 75 | #define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) |
76 | #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) | 76 | #define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) |
77 | #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) | 77 | #define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) |
78 | #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) | 78 | #define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) |
79 | #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) | 79 | #define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) |
80 | #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) | 80 | #define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) |
81 | #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) | 81 | #define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) |
82 | #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) | 82 | #define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) |
83 | #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) | 83 | #define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) |
84 | #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) | 84 | #define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) |
85 | #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) | 85 | #define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) |
86 | #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) | 86 | #define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) |
87 | #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) | 87 | #define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) |
88 | #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) | 88 | #define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) |
89 | #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) | 89 | #define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) |
90 | #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) | 90 | #define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) |
91 | #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) | 91 | #define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) |
92 | #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) | 92 | #define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) |
93 | #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) | 93 | #define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) |
94 | #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) | 94 | #define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) |
95 | #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) | 95 | #define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) |
96 | #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) | 96 | #define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) |
97 | #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) | 97 | #define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) |
98 | #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) | 98 | #define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) |
99 | #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) | 99 | #define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) |
100 | #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) | 100 | #define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) |
101 | #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) | 101 | #define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) |
102 | #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) | 102 | #define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) |
103 | #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) | 103 | #define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) |
104 | #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) | 104 | #define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) |
105 | 105 | ||
106 | /* DI_DISP_SIG_POL bits */ | 106 | /* DI_DISP_SIG_POL bits */ |
107 | #define DI_D3_VSYNC_POL_SHIFT 28 | 107 | #define DI_D3_VSYNC_POL_SHIFT 28 |
108 | #define DI_D3_HSYNC_POL_SHIFT 27 | 108 | #define DI_D3_HSYNC_POL_SHIFT 27 |
109 | #define DI_D3_DRDY_SHARP_POL_SHIFT 26 | 109 | #define DI_D3_DRDY_SHARP_POL_SHIFT 26 |
110 | #define DI_D3_CLK_POL_SHIFT 25 | 110 | #define DI_D3_CLK_POL_SHIFT 25 |
111 | #define DI_D3_DATA_POL_SHIFT 24 | 111 | #define DI_D3_DATA_POL_SHIFT 24 |
112 | 112 | ||
113 | /* DI_DISP_IF_CONF bits */ | 113 | /* DI_DISP_IF_CONF bits */ |
114 | #define DI_D3_CLK_IDLE_SHIFT 26 | 114 | #define DI_D3_CLK_IDLE_SHIFT 26 |
115 | #define DI_D3_CLK_SEL_SHIFT 25 | 115 | #define DI_D3_CLK_SEL_SHIFT 25 |
116 | #define DI_D3_DATAMSK_SHIFT 24 | 116 | #define DI_D3_DATAMSK_SHIFT 24 |
117 | 117 | ||
118 | enum ipu_panel { | 118 | enum ipu_panel { |
119 | IPU_PANEL_SHARP_TFT, | 119 | IPU_PANEL_SHARP_TFT, |
120 | IPU_PANEL_TFT, | 120 | IPU_PANEL_TFT, |
121 | }; | 121 | }; |
122 | 122 | ||
123 | struct ipu_di_signal_cfg { | 123 | struct ipu_di_signal_cfg { |
124 | unsigned datamask_en:1; | 124 | unsigned datamask_en:1; |
125 | unsigned clksel_en:1; | 125 | unsigned clksel_en:1; |
126 | unsigned clkidle_en:1; | 126 | unsigned clkidle_en:1; |
127 | unsigned data_pol:1; /* true = inverted */ | 127 | unsigned data_pol:1; /* true = inverted */ |
128 | unsigned clk_pol:1; /* true = rising edge */ | 128 | unsigned clk_pol:1; /* true = rising edge */ |
129 | unsigned enable_pol:1; | 129 | unsigned enable_pol:1; |
130 | unsigned Hsync_pol:1; /* true = active high */ | 130 | unsigned Hsync_pol:1; /* true = active high */ |
131 | unsigned Vsync_pol:1; | 131 | unsigned Vsync_pol:1; |
132 | }; | 132 | }; |
133 | 133 | ||
134 | static const struct fb_videomode mx3fb_modedb[] = { | 134 | static const struct fb_videomode mx3fb_modedb[] = { |
135 | { | 135 | { |
136 | /* 240x320 @ 60 Hz */ | 136 | /* 240x320 @ 60 Hz */ |
137 | .name = "Sharp-QVGA", | 137 | .name = "Sharp-QVGA", |
138 | .refresh = 60, | 138 | .refresh = 60, |
139 | .xres = 240, | 139 | .xres = 240, |
140 | .yres = 320, | 140 | .yres = 320, |
141 | .pixclock = 185925, | 141 | .pixclock = 185925, |
142 | .left_margin = 9, | 142 | .left_margin = 9, |
143 | .right_margin = 16, | 143 | .right_margin = 16, |
144 | .upper_margin = 7, | 144 | .upper_margin = 7, |
145 | .lower_margin = 9, | 145 | .lower_margin = 9, |
146 | .hsync_len = 1, | 146 | .hsync_len = 1, |
147 | .vsync_len = 1, | 147 | .vsync_len = 1, |
148 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | 148 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | |
149 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | 149 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | |
150 | FB_SYNC_CLK_IDLE_EN, | 150 | FB_SYNC_CLK_IDLE_EN, |
151 | .vmode = FB_VMODE_NONINTERLACED, | 151 | .vmode = FB_VMODE_NONINTERLACED, |
152 | .flag = 0, | 152 | .flag = 0, |
153 | }, { | 153 | }, { |
154 | /* 240x33 @ 60 Hz */ | 154 | /* 240x33 @ 60 Hz */ |
155 | .name = "Sharp-CLI", | 155 | .name = "Sharp-CLI", |
156 | .refresh = 60, | 156 | .refresh = 60, |
157 | .xres = 240, | 157 | .xres = 240, |
158 | .yres = 33, | 158 | .yres = 33, |
159 | .pixclock = 185925, | 159 | .pixclock = 185925, |
160 | .left_margin = 9, | 160 | .left_margin = 9, |
161 | .right_margin = 16, | 161 | .right_margin = 16, |
162 | .upper_margin = 7, | 162 | .upper_margin = 7, |
163 | .lower_margin = 9 + 287, | 163 | .lower_margin = 9 + 287, |
164 | .hsync_len = 1, | 164 | .hsync_len = 1, |
165 | .vsync_len = 1, | 165 | .vsync_len = 1, |
166 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | | 166 | .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | |
167 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | | 167 | FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | |
168 | FB_SYNC_CLK_IDLE_EN, | 168 | FB_SYNC_CLK_IDLE_EN, |
169 | .vmode = FB_VMODE_NONINTERLACED, | 169 | .vmode = FB_VMODE_NONINTERLACED, |
170 | .flag = 0, | 170 | .flag = 0, |
171 | }, { | 171 | }, { |
172 | /* 640x480 @ 60 Hz */ | 172 | /* 640x480 @ 60 Hz */ |
173 | .name = "NEC-VGA", | 173 | .name = "NEC-VGA", |
174 | .refresh = 60, | 174 | .refresh = 60, |
175 | .xres = 640, | 175 | .xres = 640, |
176 | .yres = 480, | 176 | .yres = 480, |
177 | .pixclock = 38255, | 177 | .pixclock = 38255, |
178 | .left_margin = 144, | 178 | .left_margin = 144, |
179 | .right_margin = 0, | 179 | .right_margin = 0, |
180 | .upper_margin = 34, | 180 | .upper_margin = 34, |
181 | .lower_margin = 40, | 181 | .lower_margin = 40, |
182 | .hsync_len = 1, | 182 | .hsync_len = 1, |
183 | .vsync_len = 1, | 183 | .vsync_len = 1, |
184 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, | 184 | .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, |
185 | .vmode = FB_VMODE_NONINTERLACED, | 185 | .vmode = FB_VMODE_NONINTERLACED, |
186 | .flag = 0, | 186 | .flag = 0, |
187 | }, { | 187 | }, { |
188 | /* NTSC TV output */ | 188 | /* NTSC TV output */ |
189 | .name = "TV-NTSC", | 189 | .name = "TV-NTSC", |
190 | .refresh = 60, | 190 | .refresh = 60, |
191 | .xres = 640, | 191 | .xres = 640, |
192 | .yres = 480, | 192 | .yres = 480, |
193 | .pixclock = 37538, | 193 | .pixclock = 37538, |
194 | .left_margin = 38, | 194 | .left_margin = 38, |
195 | .right_margin = 858 - 640 - 38 - 3, | 195 | .right_margin = 858 - 640 - 38 - 3, |
196 | .upper_margin = 36, | 196 | .upper_margin = 36, |
197 | .lower_margin = 518 - 480 - 36 - 1, | 197 | .lower_margin = 518 - 480 - 36 - 1, |
198 | .hsync_len = 3, | 198 | .hsync_len = 3, |
199 | .vsync_len = 1, | 199 | .vsync_len = 1, |
200 | .sync = 0, | 200 | .sync = 0, |
201 | .vmode = FB_VMODE_NONINTERLACED, | 201 | .vmode = FB_VMODE_NONINTERLACED, |
202 | .flag = 0, | 202 | .flag = 0, |
203 | }, { | 203 | }, { |
204 | /* PAL TV output */ | 204 | /* PAL TV output */ |
205 | .name = "TV-PAL", | 205 | .name = "TV-PAL", |
206 | .refresh = 50, | 206 | .refresh = 50, |
207 | .xres = 640, | 207 | .xres = 640, |
208 | .yres = 480, | 208 | .yres = 480, |
209 | .pixclock = 37538, | 209 | .pixclock = 37538, |
210 | .left_margin = 38, | 210 | .left_margin = 38, |
211 | .right_margin = 960 - 640 - 38 - 32, | 211 | .right_margin = 960 - 640 - 38 - 32, |
212 | .upper_margin = 32, | 212 | .upper_margin = 32, |
213 | .lower_margin = 555 - 480 - 32 - 3, | 213 | .lower_margin = 555 - 480 - 32 - 3, |
214 | .hsync_len = 32, | 214 | .hsync_len = 32, |
215 | .vsync_len = 3, | 215 | .vsync_len = 3, |
216 | .sync = 0, | 216 | .sync = 0, |
217 | .vmode = FB_VMODE_NONINTERLACED, | 217 | .vmode = FB_VMODE_NONINTERLACED, |
218 | .flag = 0, | 218 | .flag = 0, |
219 | }, { | 219 | }, { |
220 | /* TV output VGA mode, 640x480 @ 65 Hz */ | 220 | /* TV output VGA mode, 640x480 @ 65 Hz */ |
221 | .name = "TV-VGA", | 221 | .name = "TV-VGA", |
222 | .refresh = 60, | 222 | .refresh = 60, |
223 | .xres = 640, | 223 | .xres = 640, |
224 | .yres = 480, | 224 | .yres = 480, |
225 | .pixclock = 40574, | 225 | .pixclock = 40574, |
226 | .left_margin = 35, | 226 | .left_margin = 35, |
227 | .right_margin = 45, | 227 | .right_margin = 45, |
228 | .upper_margin = 9, | 228 | .upper_margin = 9, |
229 | .lower_margin = 1, | 229 | .lower_margin = 1, |
230 | .hsync_len = 46, | 230 | .hsync_len = 46, |
231 | .vsync_len = 5, | 231 | .vsync_len = 5, |
232 | .sync = 0, | 232 | .sync = 0, |
233 | .vmode = FB_VMODE_NONINTERLACED, | 233 | .vmode = FB_VMODE_NONINTERLACED, |
234 | .flag = 0, | 234 | .flag = 0, |
235 | }, | 235 | }, |
236 | }; | 236 | }; |
237 | 237 | ||
238 | struct mx3fb_data { | 238 | struct mx3fb_data { |
239 | struct fb_info *fbi; | 239 | struct fb_info *fbi; |
240 | int backlight_level; | 240 | int backlight_level; |
241 | void __iomem *reg_base; | 241 | void __iomem *reg_base; |
242 | spinlock_t lock; | 242 | spinlock_t lock; |
243 | struct device *dev; | 243 | struct device *dev; |
244 | 244 | ||
245 | uint32_t h_start_width; | 245 | uint32_t h_start_width; |
246 | uint32_t v_start_width; | 246 | uint32_t v_start_width; |
247 | }; | 247 | }; |
248 | 248 | ||
249 | struct dma_chan_request { | 249 | struct dma_chan_request { |
250 | struct mx3fb_data *mx3fb; | 250 | struct mx3fb_data *mx3fb; |
251 | enum ipu_channel id; | 251 | enum ipu_channel id; |
252 | }; | 252 | }; |
253 | 253 | ||
254 | /* MX3 specific framebuffer information. */ | 254 | /* MX3 specific framebuffer information. */ |
255 | struct mx3fb_info { | 255 | struct mx3fb_info { |
256 | int blank; | 256 | int blank; |
257 | enum ipu_channel ipu_ch; | 257 | enum ipu_channel ipu_ch; |
258 | uint32_t cur_ipu_buf; | 258 | uint32_t cur_ipu_buf; |
259 | 259 | ||
260 | u32 pseudo_palette[16]; | 260 | u32 pseudo_palette[16]; |
261 | 261 | ||
262 | struct completion flip_cmpl; | 262 | struct completion flip_cmpl; |
263 | struct mutex mutex; /* Protects fb-ops */ | 263 | struct mutex mutex; /* Protects fb-ops */ |
264 | struct mx3fb_data *mx3fb; | 264 | struct mx3fb_data *mx3fb; |
265 | struct idmac_channel *idmac_channel; | 265 | struct idmac_channel *idmac_channel; |
266 | struct dma_async_tx_descriptor *txd; | 266 | struct dma_async_tx_descriptor *txd; |
267 | dma_cookie_t cookie; | 267 | dma_cookie_t cookie; |
268 | struct scatterlist sg[2]; | 268 | struct scatterlist sg[2]; |
269 | 269 | ||
270 | u32 sync; /* preserve var->sync flags */ | 270 | u32 sync; /* preserve var->sync flags */ |
271 | }; | 271 | }; |
272 | 272 | ||
273 | static void mx3fb_dma_done(void *); | 273 | static void mx3fb_dma_done(void *); |
@@ -278,389 +278,389 @@ static unsigned long default_bpp = 16; | |||
278 | 278 | ||
279 | static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) | 279 | static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) |
280 | { | 280 | { |
281 | return __raw_readl(mx3fb->reg_base + reg); | 281 | return __raw_readl(mx3fb->reg_base + reg); |
282 | } | 282 | } |
283 | 283 | ||
284 | static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) | 284 | static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) |
285 | { | 285 | { |
286 | __raw_writel(value, mx3fb->reg_base + reg); | 286 | __raw_writel(value, mx3fb->reg_base + reg); |
287 | } | 287 | } |
288 | 288 | ||
289 | static const uint32_t di_mappings[] = { | 289 | static const uint32_t di_mappings[] = { |
290 | 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ | 290 | 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ |
291 | 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ | 291 | 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ |
292 | 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ | 292 | 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ |
293 | 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ | 293 | 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ |
294 | }; | 294 | }; |
295 | 295 | ||
296 | static void sdc_fb_init(struct mx3fb_info *fbi) | 296 | static void sdc_fb_init(struct mx3fb_info *fbi) |
297 | { | 297 | { |
298 | struct mx3fb_data *mx3fb = fbi->mx3fb; | 298 | struct mx3fb_data *mx3fb = fbi->mx3fb; |
299 | uint32_t reg; | 299 | uint32_t reg; |
300 | 300 | ||
301 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 301 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
302 | 302 | ||
303 | mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); | 303 | mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); |
304 | } | 304 | } |
305 | 305 | ||
306 | /* Returns enabled flag before uninit */ | 306 | /* Returns enabled flag before uninit */ |
307 | static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) | 307 | static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) |
308 | { | 308 | { |
309 | struct mx3fb_data *mx3fb = fbi->mx3fb; | 309 | struct mx3fb_data *mx3fb = fbi->mx3fb; |
310 | uint32_t reg; | 310 | uint32_t reg; |
311 | 311 | ||
312 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 312 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
313 | 313 | ||
314 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); | 314 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); |
315 | 315 | ||
316 | return reg & SDC_COM_BG_EN; | 316 | return reg & SDC_COM_BG_EN; |
317 | } | 317 | } |
318 | 318 | ||
319 | static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) | 319 | static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) |
320 | { | 320 | { |
321 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 321 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
322 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | 322 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; |
323 | struct dma_chan *dma_chan = &ichan->dma_chan; | 323 | struct dma_chan *dma_chan = &ichan->dma_chan; |
324 | unsigned long flags; | 324 | unsigned long flags; |
325 | dma_cookie_t cookie; | 325 | dma_cookie_t cookie; |
326 | 326 | ||
327 | dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, | 327 | dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, |
328 | to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); | 328 | to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); |
329 | 329 | ||
330 | /* This enables the channel */ | 330 | /* This enables the channel */ |
331 | if (mx3_fbi->cookie < 0) { | 331 | if (mx3_fbi->cookie < 0) { |
332 | mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, | 332 | mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, |
333 | &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); | 333 | &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); |
334 | if (!mx3_fbi->txd) { | 334 | if (!mx3_fbi->txd) { |
335 | dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", | 335 | dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", |
336 | dma_chan->chan_id); | 336 | dma_chan->chan_id); |
337 | return; | 337 | return; |
338 | } | 338 | } |
339 | 339 | ||
340 | mx3_fbi->txd->callback_param = mx3_fbi->txd; | 340 | mx3_fbi->txd->callback_param = mx3_fbi->txd; |
341 | mx3_fbi->txd->callback = mx3fb_dma_done; | 341 | mx3_fbi->txd->callback = mx3fb_dma_done; |
342 | 342 | ||
343 | cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); | 343 | cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); |
344 | dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, | 344 | dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, |
345 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | 345 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); |
346 | } else { | 346 | } else { |
347 | if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { | 347 | if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { |
348 | dev_err(mx3fb->dev, "Cannot enable channel %d\n", | 348 | dev_err(mx3fb->dev, "Cannot enable channel %d\n", |
349 | dma_chan->chan_id); | 349 | dma_chan->chan_id); |
350 | return; | 350 | return; |
351 | } | 351 | } |
352 | 352 | ||
353 | /* Just re-activate the same buffer */ | 353 | /* Just re-activate the same buffer */ |
354 | dma_async_issue_pending(dma_chan); | 354 | dma_async_issue_pending(dma_chan); |
355 | cookie = mx3_fbi->cookie; | 355 | cookie = mx3_fbi->cookie; |
356 | dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, | 356 | dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, |
357 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); | 357 | mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); |
358 | } | 358 | } |
359 | 359 | ||
360 | if (cookie >= 0) { | 360 | if (cookie >= 0) { |
361 | spin_lock_irqsave(&mx3fb->lock, flags); | 361 | spin_lock_irqsave(&mx3fb->lock, flags); |
362 | sdc_fb_init(mx3_fbi); | 362 | sdc_fb_init(mx3_fbi); |
363 | mx3_fbi->cookie = cookie; | 363 | mx3_fbi->cookie = cookie; |
364 | spin_unlock_irqrestore(&mx3fb->lock, flags); | 364 | spin_unlock_irqrestore(&mx3fb->lock, flags); |
365 | } | 365 | } |
366 | 366 | ||
367 | /* | 367 | /* |
368 | * Attention! Without this msleep the channel keeps generating | 368 | * Attention! Without this msleep the channel keeps generating |
369 | * interrupts. Next sdc_set_brightness() is going to be called | 369 | * interrupts. Next sdc_set_brightness() is going to be called |
370 | * from mx3fb_blank(). | 370 | * from mx3fb_blank(). |
371 | */ | 371 | */ |
372 | msleep(2); | 372 | msleep(2); |
373 | } | 373 | } |
374 | 374 | ||
375 | static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) | 375 | static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) |
376 | { | 376 | { |
377 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 377 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
378 | uint32_t enabled; | 378 | uint32_t enabled; |
379 | unsigned long flags; | 379 | unsigned long flags; |
380 | 380 | ||
381 | spin_lock_irqsave(&mx3fb->lock, flags); | 381 | spin_lock_irqsave(&mx3fb->lock, flags); |
382 | 382 | ||
383 | enabled = sdc_fb_uninit(mx3_fbi); | 383 | enabled = sdc_fb_uninit(mx3_fbi); |
384 | 384 | ||
385 | spin_unlock_irqrestore(&mx3fb->lock, flags); | 385 | spin_unlock_irqrestore(&mx3fb->lock, flags); |
386 | 386 | ||
387 | mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); | 387 | mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); |
388 | mx3_fbi->txd = NULL; | 388 | mx3_fbi->txd = NULL; |
389 | mx3_fbi->cookie = -EINVAL; | 389 | mx3_fbi->cookie = -EINVAL; |
390 | } | 390 | } |
391 | 391 | ||
392 | /** | 392 | /** |
393 | * sdc_set_window_pos() - set window position of the respective plane. | 393 | * sdc_set_window_pos() - set window position of the respective plane. |
394 | * @mx3fb: mx3fb context. | 394 | * @mx3fb: mx3fb context. |
395 | * @channel: IPU DMAC channel ID. | 395 | * @channel: IPU DMAC channel ID. |
396 | * @x_pos: X coordinate relative to the top left corner to place window at. | 396 | * @x_pos: X coordinate relative to the top left corner to place window at. |
397 | * @y_pos: Y coordinate relative to the top left corner to place window at. | 397 | * @y_pos: Y coordinate relative to the top left corner to place window at. |
398 | * @return: 0 on success or negative error code on failure. | 398 | * @return: 0 on success or negative error code on failure. |
399 | */ | 399 | */ |
400 | static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, | 400 | static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, |
401 | int16_t x_pos, int16_t y_pos) | 401 | int16_t x_pos, int16_t y_pos) |
402 | { | 402 | { |
403 | x_pos += mx3fb->h_start_width; | 403 | x_pos += mx3fb->h_start_width; |
404 | y_pos += mx3fb->v_start_width; | 404 | y_pos += mx3fb->v_start_width; |
405 | 405 | ||
406 | if (channel != IDMAC_SDC_0) | 406 | if (channel != IDMAC_SDC_0) |
407 | return -EINVAL; | 407 | return -EINVAL; |
408 | 408 | ||
409 | mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); | 409 | mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); |
410 | return 0; | 410 | return 0; |
411 | } | 411 | } |
412 | 412 | ||
413 | /** | 413 | /** |
414 | * sdc_init_panel() - initialize a synchronous LCD panel. | 414 | * sdc_init_panel() - initialize a synchronous LCD panel. |
415 | * @mx3fb: mx3fb context. | 415 | * @mx3fb: mx3fb context. |
416 | * @panel: panel type. | 416 | * @panel: panel type. |
417 | * @pixel_clk: desired pixel clock frequency in Hz. | 417 | * @pixel_clk: desired pixel clock frequency in Hz. |
418 | * @width: width of panel in pixels. | 418 | * @width: width of panel in pixels. |
419 | * @height: height of panel in pixels. | 419 | * @height: height of panel in pixels. |
420 | * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. | 420 | * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. |
421 | * @h_start_width: number of pixel clocks between the HSYNC signal pulse | 421 | * @h_start_width: number of pixel clocks between the HSYNC signal pulse |
422 | * and the start of valid data. | 422 | * and the start of valid data. |
423 | * @h_sync_width: width of the HSYNC signal in units of pixel clocks. | 423 | * @h_sync_width: width of the HSYNC signal in units of pixel clocks. |
424 | * @h_end_width: number of pixel clocks between the end of valid data | 424 | * @h_end_width: number of pixel clocks between the end of valid data |
425 | * and the HSYNC signal for next line. | 425 | * and the HSYNC signal for next line. |
426 | * @v_start_width: number of lines between the VSYNC signal pulse and the | 426 | * @v_start_width: number of lines between the VSYNC signal pulse and the |
427 | * start of valid data. | 427 | * start of valid data. |
428 | * @v_sync_width: width of the VSYNC signal in units of lines | 428 | * @v_sync_width: width of the VSYNC signal in units of lines |
429 | * @v_end_width: number of lines between the end of valid data and the | 429 | * @v_end_width: number of lines between the end of valid data and the |
430 | * VSYNC signal for next frame. | 430 | * VSYNC signal for next frame. |
431 | * @sig: bitfield of signal polarities for LCD interface. | 431 | * @sig: bitfield of signal polarities for LCD interface. |
432 | * @return: 0 on success or negative error code on failure. | 432 | * @return: 0 on success or negative error code on failure. |
433 | */ | 433 | */ |
434 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, | 434 | static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, |
435 | uint32_t pixel_clk, | 435 | uint32_t pixel_clk, |
436 | uint16_t width, uint16_t height, | 436 | uint16_t width, uint16_t height, |
437 | enum pixel_fmt pixel_fmt, | 437 | enum pixel_fmt pixel_fmt, |
438 | uint16_t h_start_width, uint16_t h_sync_width, | 438 | uint16_t h_start_width, uint16_t h_sync_width, |
439 | uint16_t h_end_width, uint16_t v_start_width, | 439 | uint16_t h_end_width, uint16_t v_start_width, |
440 | uint16_t v_sync_width, uint16_t v_end_width, | 440 | uint16_t v_sync_width, uint16_t v_end_width, |
441 | struct ipu_di_signal_cfg sig) | 441 | struct ipu_di_signal_cfg sig) |
442 | { | 442 | { |
443 | unsigned long lock_flags; | 443 | unsigned long lock_flags; |
444 | uint32_t reg; | 444 | uint32_t reg; |
445 | uint32_t old_conf; | 445 | uint32_t old_conf; |
446 | uint32_t div; | 446 | uint32_t div; |
447 | struct clk *ipu_clk; | 447 | struct clk *ipu_clk; |
448 | 448 | ||
449 | dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); | 449 | dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); |
450 | 450 | ||
451 | if (v_sync_width == 0 || h_sync_width == 0) | 451 | if (v_sync_width == 0 || h_sync_width == 0) |
452 | return -EINVAL; | 452 | return -EINVAL; |
453 | 453 | ||
454 | /* Init panel size and blanking periods */ | 454 | /* Init panel size and blanking periods */ |
455 | reg = ((uint32_t) (h_sync_width - 1) << 26) | | 455 | reg = ((uint32_t) (h_sync_width - 1) << 26) | |
456 | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); | 456 | ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); |
457 | mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); | 457 | mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); |
458 | 458 | ||
459 | #ifdef DEBUG | 459 | #ifdef DEBUG |
460 | printk(KERN_CONT " hor_conf %x,", reg); | 460 | printk(KERN_CONT " hor_conf %x,", reg); |
461 | #endif | 461 | #endif |
462 | 462 | ||
463 | reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | | 463 | reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | |
464 | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); | 464 | ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); |
465 | mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); | 465 | mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); |
466 | 466 | ||
467 | #ifdef DEBUG | 467 | #ifdef DEBUG |
468 | printk(KERN_CONT " ver_conf %x\n", reg); | 468 | printk(KERN_CONT " ver_conf %x\n", reg); |
469 | #endif | 469 | #endif |
470 | 470 | ||
471 | mx3fb->h_start_width = h_start_width; | 471 | mx3fb->h_start_width = h_start_width; |
472 | mx3fb->v_start_width = v_start_width; | 472 | mx3fb->v_start_width = v_start_width; |
473 | 473 | ||
474 | switch (panel) { | 474 | switch (panel) { |
475 | case IPU_PANEL_SHARP_TFT: | 475 | case IPU_PANEL_SHARP_TFT: |
476 | mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); | 476 | mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); |
477 | mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); | 477 | mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); |
478 | mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); | 478 | mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); |
479 | break; | 479 | break; |
480 | case IPU_PANEL_TFT: | 480 | case IPU_PANEL_TFT: |
481 | mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); | 481 | mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); |
482 | break; | 482 | break; |
483 | default: | 483 | default: |
484 | return -EINVAL; | 484 | return -EINVAL; |
485 | } | 485 | } |
486 | 486 | ||
487 | /* Init clocking */ | 487 | /* Init clocking */ |
488 | 488 | ||
489 | /* | 489 | /* |
490 | * Calculate divider: fractional part is 4 bits so simply multiple by | 490 | * Calculate divider: fractional part is 4 bits so simply multiple by |
491 | * 24 to get fractional part, as long as we stay under ~250MHz and on | 491 | * 2^4 to get fractional part, as long as we stay under ~250MHz and on |
492 | * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz | 492 | * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz |
493 | */ | 493 | */ |
494 | dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); | 494 | dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); |
495 | 495 | ||
496 | ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); | 496 | ipu_clk = clk_get(mx3fb->dev, NULL); |
497 | div = clk_get_rate(ipu_clk) * 16 / pixel_clk; | 497 | div = clk_get_rate(ipu_clk) * 16 / pixel_clk; |
498 | clk_put(ipu_clk); | 498 | clk_put(ipu_clk); |
499 | 499 | ||
500 | if (div < 0x40) { /* Divider less than 4 */ | 500 | if (div < 0x40) { /* Divider less than 4 */ |
501 | dev_dbg(mx3fb->dev, | 501 | dev_dbg(mx3fb->dev, |
502 | "InitPanel() - Pixel clock divider less than 4\n"); | 502 | "InitPanel() - Pixel clock divider less than 4\n"); |
503 | div = 0x40; | 503 | div = 0x40; |
504 | } | 504 | } |
505 | 505 | ||
506 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 506 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
507 | 507 | ||
508 | /* | 508 | /* |
509 | * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits | 509 | * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits |
510 | * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing | 510 | * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing |
511 | * debug. DISP3_IF_CLK_UP_WR is 0 | 511 | * debug. DISP3_IF_CLK_UP_WR is 0 |
512 | */ | 512 | */ |
513 | mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); | 513 | mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); |
514 | 514 | ||
515 | /* DI settings */ | 515 | /* DI settings */ |
516 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; | 516 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; |
517 | old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | | 517 | old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | |
518 | sig.clksel_en << DI_D3_CLK_SEL_SHIFT | | 518 | sig.clksel_en << DI_D3_CLK_SEL_SHIFT | |
519 | sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; | 519 | sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; |
520 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); | 520 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); |
521 | 521 | ||
522 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; | 522 | old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; |
523 | old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | | 523 | old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | |
524 | sig.clk_pol << DI_D3_CLK_POL_SHIFT | | 524 | sig.clk_pol << DI_D3_CLK_POL_SHIFT | |
525 | sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | | 525 | sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | |
526 | sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | | 526 | sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | |
527 | sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; | 527 | sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; |
528 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); | 528 | mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); |
529 | 529 | ||
530 | switch (pixel_fmt) { | 530 | switch (pixel_fmt) { |
531 | case IPU_PIX_FMT_RGB24: | 531 | case IPU_PIX_FMT_RGB24: |
532 | mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); | 532 | mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); |
533 | mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); | 533 | mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); |
534 | mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); | 534 | mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); |
535 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 535 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
536 | ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); | 536 | ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); |
537 | break; | 537 | break; |
538 | case IPU_PIX_FMT_RGB666: | 538 | case IPU_PIX_FMT_RGB666: |
539 | mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); | 539 | mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); |
540 | mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); | 540 | mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); |
541 | mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); | 541 | mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); |
542 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 542 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
543 | ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); | 543 | ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); |
544 | break; | 544 | break; |
545 | case IPU_PIX_FMT_BGR666: | 545 | case IPU_PIX_FMT_BGR666: |
546 | mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); | 546 | mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); |
547 | mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); | 547 | mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); |
548 | mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); | 548 | mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); |
549 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 549 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
550 | ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); | 550 | ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); |
551 | break; | 551 | break; |
552 | default: | 552 | default: |
553 | mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); | 553 | mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); |
554 | mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); | 554 | mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); |
555 | mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); | 555 | mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); |
556 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | | 556 | mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | |
557 | ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); | 557 | ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); |
558 | break; | 558 | break; |
559 | } | 559 | } |
560 | 560 | ||
561 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 561 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
562 | 562 | ||
563 | dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", | 563 | dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", |
564 | mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); | 564 | mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); |
565 | dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", | 565 | dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", |
566 | mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); | 566 | mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); |
567 | dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", | 567 | dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", |
568 | mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); | 568 | mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); |
569 | 569 | ||
570 | return 0; | 570 | return 0; |
571 | } | 571 | } |
572 | 572 | ||
573 | /** | 573 | /** |
574 | * sdc_set_color_key() - set the transparent color key for SDC graphic plane. | 574 | * sdc_set_color_key() - set the transparent color key for SDC graphic plane. |
575 | * @mx3fb: mx3fb context. | 575 | * @mx3fb: mx3fb context. |
576 | * @channel: IPU DMAC channel ID. | 576 | * @channel: IPU DMAC channel ID. |
577 | * @enable: boolean to enable or disable color keyl. | 577 | * @enable: boolean to enable or disable color keyl. |
578 | * @color_key: 24-bit RGB color to use as transparent color key. | 578 | * @color_key: 24-bit RGB color to use as transparent color key. |
579 | * @return: 0 on success or negative error code on failure. | 579 | * @return: 0 on success or negative error code on failure. |
580 | */ | 580 | */ |
581 | static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, | 581 | static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, |
582 | bool enable, uint32_t color_key) | 582 | bool enable, uint32_t color_key) |
583 | { | 583 | { |
584 | uint32_t reg, sdc_conf; | 584 | uint32_t reg, sdc_conf; |
585 | unsigned long lock_flags; | 585 | unsigned long lock_flags; |
586 | 586 | ||
587 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 587 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
588 | 588 | ||
589 | sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 589 | sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
590 | if (channel == IDMAC_SDC_0) | 590 | if (channel == IDMAC_SDC_0) |
591 | sdc_conf &= ~SDC_COM_GWSEL; | 591 | sdc_conf &= ~SDC_COM_GWSEL; |
592 | else | 592 | else |
593 | sdc_conf |= SDC_COM_GWSEL; | 593 | sdc_conf |= SDC_COM_GWSEL; |
594 | 594 | ||
595 | if (enable) { | 595 | if (enable) { |
596 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; | 596 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; |
597 | mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), | 597 | mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), |
598 | SDC_GW_CTRL); | 598 | SDC_GW_CTRL); |
599 | 599 | ||
600 | sdc_conf |= SDC_COM_KEY_COLOR_G; | 600 | sdc_conf |= SDC_COM_KEY_COLOR_G; |
601 | } else { | 601 | } else { |
602 | sdc_conf &= ~SDC_COM_KEY_COLOR_G; | 602 | sdc_conf &= ~SDC_COM_KEY_COLOR_G; |
603 | } | 603 | } |
604 | mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); | 604 | mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); |
605 | 605 | ||
606 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 606 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
607 | 607 | ||
608 | return 0; | 608 | return 0; |
609 | } | 609 | } |
610 | 610 | ||
611 | /** | 611 | /** |
612 | * sdc_set_global_alpha() - set global alpha blending modes. | 612 | * sdc_set_global_alpha() - set global alpha blending modes. |
613 | * @mx3fb: mx3fb context. | 613 | * @mx3fb: mx3fb context. |
614 | * @enable: boolean to enable or disable global alpha blending. If disabled, | 614 | * @enable: boolean to enable or disable global alpha blending. If disabled, |
615 | * per pixel blending is used. | 615 | * per pixel blending is used. |
616 | * @alpha: global alpha value. | 616 | * @alpha: global alpha value. |
617 | * @return: 0 on success or negative error code on failure. | 617 | * @return: 0 on success or negative error code on failure. |
618 | */ | 618 | */ |
619 | static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) | 619 | static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) |
620 | { | 620 | { |
621 | uint32_t reg; | 621 | uint32_t reg; |
622 | unsigned long lock_flags; | 622 | unsigned long lock_flags; |
623 | 623 | ||
624 | spin_lock_irqsave(&mx3fb->lock, lock_flags); | 624 | spin_lock_irqsave(&mx3fb->lock, lock_flags); |
625 | 625 | ||
626 | if (enable) { | 626 | if (enable) { |
627 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; | 627 | reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; |
628 | mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); | 628 | mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); |
629 | 629 | ||
630 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 630 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
631 | mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); | 631 | mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); |
632 | } else { | 632 | } else { |
633 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); | 633 | reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); |
634 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); | 634 | mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); |
635 | } | 635 | } |
636 | 636 | ||
637 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); | 637 | spin_unlock_irqrestore(&mx3fb->lock, lock_flags); |
638 | 638 | ||
639 | return 0; | 639 | return 0; |
640 | } | 640 | } |
641 | 641 | ||
642 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) | 642 | static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) |
643 | { | 643 | { |
644 | /* This might be board-specific */ | 644 | /* This might be board-specific */ |
645 | mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); | 645 | mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); |
646 | return; | 646 | return; |
647 | } | 647 | } |
648 | 648 | ||
649 | static uint32_t bpp_to_pixfmt(int bpp) | 649 | static uint32_t bpp_to_pixfmt(int bpp) |
650 | { | 650 | { |
651 | uint32_t pixfmt = 0; | 651 | uint32_t pixfmt = 0; |
652 | switch (bpp) { | 652 | switch (bpp) { |
653 | case 24: | 653 | case 24: |
654 | pixfmt = IPU_PIX_FMT_BGR24; | 654 | pixfmt = IPU_PIX_FMT_BGR24; |
655 | break; | 655 | break; |
656 | case 32: | 656 | case 32: |
657 | pixfmt = IPU_PIX_FMT_BGR32; | 657 | pixfmt = IPU_PIX_FMT_BGR32; |
658 | break; | 658 | break; |
659 | case 16: | 659 | case 16: |
660 | pixfmt = IPU_PIX_FMT_RGB565; | 660 | pixfmt = IPU_PIX_FMT_RGB565; |
661 | break; | 661 | break; |
662 | } | 662 | } |
663 | return pixfmt; | 663 | return pixfmt; |
664 | } | 664 | } |
665 | 665 | ||
666 | static int mx3fb_blank(int blank, struct fb_info *fbi); | 666 | static int mx3fb_blank(int blank, struct fb_info *fbi); |
@@ -669,300 +669,300 @@ static int mx3fb_unmap_video_memory(struct fb_info *fbi); | |||
669 | 669 | ||
670 | /** | 670 | /** |
671 | * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. | 671 | * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. |
672 | * @info: framebuffer information pointer | 672 | * @info: framebuffer information pointer |
673 | * @return: 0 on success or negative error code on failure. | 673 | * @return: 0 on success or negative error code on failure. |
674 | */ | 674 | */ |
675 | static int mx3fb_set_fix(struct fb_info *fbi) | 675 | static int mx3fb_set_fix(struct fb_info *fbi) |
676 | { | 676 | { |
677 | struct fb_fix_screeninfo *fix = &fbi->fix; | 677 | struct fb_fix_screeninfo *fix = &fbi->fix; |
678 | struct fb_var_screeninfo *var = &fbi->var; | 678 | struct fb_var_screeninfo *var = &fbi->var; |
679 | 679 | ||
680 | strncpy(fix->id, "DISP3 BG", 8); | 680 | strncpy(fix->id, "DISP3 BG", 8); |
681 | 681 | ||
682 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; | 682 | fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; |
683 | 683 | ||
684 | fix->type = FB_TYPE_PACKED_PIXELS; | 684 | fix->type = FB_TYPE_PACKED_PIXELS; |
685 | fix->accel = FB_ACCEL_NONE; | 685 | fix->accel = FB_ACCEL_NONE; |
686 | fix->visual = FB_VISUAL_TRUECOLOR; | 686 | fix->visual = FB_VISUAL_TRUECOLOR; |
687 | fix->xpanstep = 1; | 687 | fix->xpanstep = 1; |
688 | fix->ypanstep = 1; | 688 | fix->ypanstep = 1; |
689 | 689 | ||
690 | return 0; | 690 | return 0; |
691 | } | 691 | } |
692 | 692 | ||
693 | static void mx3fb_dma_done(void *arg) | 693 | static void mx3fb_dma_done(void *arg) |
694 | { | 694 | { |
695 | struct idmac_tx_desc *tx_desc = to_tx_desc(arg); | 695 | struct idmac_tx_desc *tx_desc = to_tx_desc(arg); |
696 | struct dma_chan *chan = tx_desc->txd.chan; | 696 | struct dma_chan *chan = tx_desc->txd.chan; |
697 | struct idmac_channel *ichannel = to_idmac_chan(chan); | 697 | struct idmac_channel *ichannel = to_idmac_chan(chan); |
698 | struct mx3fb_data *mx3fb = ichannel->client; | 698 | struct mx3fb_data *mx3fb = ichannel->client; |
699 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; | 699 | struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; |
700 | 700 | ||
701 | dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); | 701 | dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); |
702 | 702 | ||
703 | /* We only need one interrupt, it will be re-enabled as needed */ | 703 | /* We only need one interrupt, it will be re-enabled as needed */ |
704 | disable_irq(ichannel->eof_irq); | 704 | disable_irq(ichannel->eof_irq); |
705 | 705 | ||
706 | complete(&mx3_fbi->flip_cmpl); | 706 | complete(&mx3_fbi->flip_cmpl); |
707 | } | 707 | } |
708 | 708 | ||
709 | /** | 709 | /** |
710 | * mx3fb_set_par() - set framebuffer parameters and change the operating mode. | 710 | * mx3fb_set_par() - set framebuffer parameters and change the operating mode. |
711 | * @fbi: framebuffer information pointer. | 711 | * @fbi: framebuffer information pointer. |
712 | * @return: 0 on success or negative error code on failure. | 712 | * @return: 0 on success or negative error code on failure. |
713 | */ | 713 | */ |
714 | static int mx3fb_set_par(struct fb_info *fbi) | 714 | static int mx3fb_set_par(struct fb_info *fbi) |
715 | { | 715 | { |
716 | u32 mem_len; | 716 | u32 mem_len; |
717 | struct ipu_di_signal_cfg sig_cfg; | 717 | struct ipu_di_signal_cfg sig_cfg; |
718 | enum ipu_panel mode = IPU_PANEL_TFT; | 718 | enum ipu_panel mode = IPU_PANEL_TFT; |
719 | struct mx3fb_info *mx3_fbi = fbi->par; | 719 | struct mx3fb_info *mx3_fbi = fbi->par; |
720 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 720 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
721 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; | 721 | struct idmac_channel *ichan = mx3_fbi->idmac_channel; |
722 | struct idmac_video_param *video = &ichan->params.video; | 722 | struct idmac_video_param *video = &ichan->params.video; |
723 | struct scatterlist *sg = mx3_fbi->sg; | 723 | struct scatterlist *sg = mx3_fbi->sg; |
724 | size_t screen_size; | 724 | size_t screen_size; |
725 | 725 | ||
726 | dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); | 726 | dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); |
727 | 727 | ||
728 | mutex_lock(&mx3_fbi->mutex); | 728 | mutex_lock(&mx3_fbi->mutex); |
729 | 729 | ||
730 | /* Total cleanup */ | 730 | /* Total cleanup */ |
731 | if (mx3_fbi->txd) | 731 | if (mx3_fbi->txd) |
732 | sdc_disable_channel(mx3_fbi); | 732 | sdc_disable_channel(mx3_fbi); |
733 | 733 | ||
734 | mx3fb_set_fix(fbi); | 734 | mx3fb_set_fix(fbi); |
735 | 735 | ||
736 | mem_len = fbi->var.yres_virtual * fbi->fix.line_length; | 736 | mem_len = fbi->var.yres_virtual * fbi->fix.line_length; |
737 | if (mem_len > fbi->fix.smem_len) { | 737 | if (mem_len > fbi->fix.smem_len) { |
738 | if (fbi->fix.smem_start) | 738 | if (fbi->fix.smem_start) |
739 | mx3fb_unmap_video_memory(fbi); | 739 | mx3fb_unmap_video_memory(fbi); |
740 | 740 | ||
741 | fbi->fix.smem_len = mem_len; | 741 | fbi->fix.smem_len = mem_len; |
742 | if (mx3fb_map_video_memory(fbi) < 0) { | 742 | if (mx3fb_map_video_memory(fbi) < 0) { |
743 | mutex_unlock(&mx3_fbi->mutex); | 743 | mutex_unlock(&mx3_fbi->mutex); |
744 | return -ENOMEM; | 744 | return -ENOMEM; |
745 | } | 745 | } |
746 | } | 746 | } |
747 | 747 | ||
748 | screen_size = fbi->fix.line_length * fbi->var.yres; | 748 | screen_size = fbi->fix.line_length * fbi->var.yres; |
749 | 749 | ||
750 | sg_init_table(&sg[0], 1); | 750 | sg_init_table(&sg[0], 1); |
751 | sg_init_table(&sg[1], 1); | 751 | sg_init_table(&sg[1], 1); |
752 | 752 | ||
753 | sg_dma_address(&sg[0]) = fbi->fix.smem_start; | 753 | sg_dma_address(&sg[0]) = fbi->fix.smem_start; |
754 | sg_set_page(&sg[0], virt_to_page(fbi->screen_base), | 754 | sg_set_page(&sg[0], virt_to_page(fbi->screen_base), |
755 | fbi->fix.smem_len, | 755 | fbi->fix.smem_len, |
756 | offset_in_page(fbi->screen_base)); | 756 | offset_in_page(fbi->screen_base)); |
757 | 757 | ||
758 | if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { | 758 | if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { |
759 | memset(&sig_cfg, 0, sizeof(sig_cfg)); | 759 | memset(&sig_cfg, 0, sizeof(sig_cfg)); |
760 | if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) | 760 | if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) |
761 | sig_cfg.Hsync_pol = true; | 761 | sig_cfg.Hsync_pol = true; |
762 | if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) | 762 | if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) |
763 | sig_cfg.Vsync_pol = true; | 763 | sig_cfg.Vsync_pol = true; |
764 | if (fbi->var.sync & FB_SYNC_CLK_INVERT) | 764 | if (fbi->var.sync & FB_SYNC_CLK_INVERT) |
765 | sig_cfg.clk_pol = true; | 765 | sig_cfg.clk_pol = true; |
766 | if (fbi->var.sync & FB_SYNC_DATA_INVERT) | 766 | if (fbi->var.sync & FB_SYNC_DATA_INVERT) |
767 | sig_cfg.data_pol = true; | 767 | sig_cfg.data_pol = true; |
768 | if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) | 768 | if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) |
769 | sig_cfg.enable_pol = true; | 769 | sig_cfg.enable_pol = true; |
770 | if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) | 770 | if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) |
771 | sig_cfg.clkidle_en = true; | 771 | sig_cfg.clkidle_en = true; |
772 | if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) | 772 | if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) |
773 | sig_cfg.clksel_en = true; | 773 | sig_cfg.clksel_en = true; |
774 | if (fbi->var.sync & FB_SYNC_SHARP_MODE) | 774 | if (fbi->var.sync & FB_SYNC_SHARP_MODE) |
775 | mode = IPU_PANEL_SHARP_TFT; | 775 | mode = IPU_PANEL_SHARP_TFT; |
776 | 776 | ||
777 | dev_dbg(fbi->device, "pixclock = %ul Hz\n", | 777 | dev_dbg(fbi->device, "pixclock = %ul Hz\n", |
778 | (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); | 778 | (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); |
779 | 779 | ||
780 | if (sdc_init_panel(mx3fb, mode, | 780 | if (sdc_init_panel(mx3fb, mode, |
781 | (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, | 781 | (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, |
782 | fbi->var.xres, fbi->var.yres, | 782 | fbi->var.xres, fbi->var.yres, |
783 | (fbi->var.sync & FB_SYNC_SWAP_RGB) ? | 783 | (fbi->var.sync & FB_SYNC_SWAP_RGB) ? |
784 | IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, | 784 | IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, |
785 | fbi->var.left_margin, | 785 | fbi->var.left_margin, |
786 | fbi->var.hsync_len, | 786 | fbi->var.hsync_len, |
787 | fbi->var.right_margin + | 787 | fbi->var.right_margin + |
788 | fbi->var.hsync_len, | 788 | fbi->var.hsync_len, |
789 | fbi->var.upper_margin, | 789 | fbi->var.upper_margin, |
790 | fbi->var.vsync_len, | 790 | fbi->var.vsync_len, |
791 | fbi->var.lower_margin + | 791 | fbi->var.lower_margin + |
792 | fbi->var.vsync_len, sig_cfg) != 0) { | 792 | fbi->var.vsync_len, sig_cfg) != 0) { |
793 | mutex_unlock(&mx3_fbi->mutex); | 793 | mutex_unlock(&mx3_fbi->mutex); |
794 | dev_err(fbi->device, | 794 | dev_err(fbi->device, |
795 | "mx3fb: Error initializing panel.\n"); | 795 | "mx3fb: Error initializing panel.\n"); |
796 | return -EINVAL; | 796 | return -EINVAL; |
797 | } | 797 | } |
798 | } | 798 | } |
799 | 799 | ||
800 | sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); | 800 | sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); |
801 | 801 | ||
802 | mx3_fbi->cur_ipu_buf = 0; | 802 | mx3_fbi->cur_ipu_buf = 0; |
803 | 803 | ||
804 | video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); | 804 | video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); |
805 | video->out_width = fbi->var.xres; | 805 | video->out_width = fbi->var.xres; |
806 | video->out_height = fbi->var.yres; | 806 | video->out_height = fbi->var.yres; |
807 | video->out_stride = fbi->var.xres_virtual; | 807 | video->out_stride = fbi->var.xres_virtual; |
808 | 808 | ||
809 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) | 809 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) |
810 | sdc_enable_channel(mx3_fbi); | 810 | sdc_enable_channel(mx3_fbi); |
811 | 811 | ||
812 | mutex_unlock(&mx3_fbi->mutex); | 812 | mutex_unlock(&mx3_fbi->mutex); |
813 | 813 | ||
814 | return 0; | 814 | return 0; |
815 | } | 815 | } |
816 | 816 | ||
817 | /** | 817 | /** |
818 | * mx3fb_check_var() - check and adjust framebuffer variable parameters. | 818 | * mx3fb_check_var() - check and adjust framebuffer variable parameters. |
819 | * @var: framebuffer variable parameters | 819 | * @var: framebuffer variable parameters |
820 | * @fbi: framebuffer information pointer | 820 | * @fbi: framebuffer information pointer |
821 | */ | 821 | */ |
822 | static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) | 822 | static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) |
823 | { | 823 | { |
824 | struct mx3fb_info *mx3_fbi = fbi->par; | 824 | struct mx3fb_info *mx3_fbi = fbi->par; |
825 | u32 vtotal; | 825 | u32 vtotal; |
826 | u32 htotal; | 826 | u32 htotal; |
827 | 827 | ||
828 | dev_dbg(fbi->device, "%s\n", __func__); | 828 | dev_dbg(fbi->device, "%s\n", __func__); |
829 | 829 | ||
830 | if (var->xres_virtual < var->xres) | 830 | if (var->xres_virtual < var->xres) |
831 | var->xres_virtual = var->xres; | 831 | var->xres_virtual = var->xres; |
832 | if (var->yres_virtual < var->yres) | 832 | if (var->yres_virtual < var->yres) |
833 | var->yres_virtual = var->yres; | 833 | var->yres_virtual = var->yres; |
834 | 834 | ||
835 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && | 835 | if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && |
836 | (var->bits_per_pixel != 16)) | 836 | (var->bits_per_pixel != 16)) |
837 | var->bits_per_pixel = default_bpp; | 837 | var->bits_per_pixel = default_bpp; |
838 | 838 | ||
839 | switch (var->bits_per_pixel) { | 839 | switch (var->bits_per_pixel) { |
840 | case 16: | 840 | case 16: |
841 | var->red.length = 5; | 841 | var->red.length = 5; |
842 | var->red.offset = 11; | 842 | var->red.offset = 11; |
843 | var->red.msb_right = 0; | 843 | var->red.msb_right = 0; |
844 | 844 | ||
845 | var->green.length = 6; | 845 | var->green.length = 6; |
846 | var->green.offset = 5; | 846 | var->green.offset = 5; |
847 | var->green.msb_right = 0; | 847 | var->green.msb_right = 0; |
848 | 848 | ||
849 | var->blue.length = 5; | 849 | var->blue.length = 5; |
850 | var->blue.offset = 0; | 850 | var->blue.offset = 0; |
851 | var->blue.msb_right = 0; | 851 | var->blue.msb_right = 0; |
852 | 852 | ||
853 | var->transp.length = 0; | 853 | var->transp.length = 0; |
854 | var->transp.offset = 0; | 854 | var->transp.offset = 0; |
855 | var->transp.msb_right = 0; | 855 | var->transp.msb_right = 0; |
856 | break; | 856 | break; |
857 | case 24: | 857 | case 24: |
858 | var->red.length = 8; | 858 | var->red.length = 8; |
859 | var->red.offset = 16; | 859 | var->red.offset = 16; |
860 | var->red.msb_right = 0; | 860 | var->red.msb_right = 0; |
861 | 861 | ||
862 | var->green.length = 8; | 862 | var->green.length = 8; |
863 | var->green.offset = 8; | 863 | var->green.offset = 8; |
864 | var->green.msb_right = 0; | 864 | var->green.msb_right = 0; |
865 | 865 | ||
866 | var->blue.length = 8; | 866 | var->blue.length = 8; |
867 | var->blue.offset = 0; | 867 | var->blue.offset = 0; |
868 | var->blue.msb_right = 0; | 868 | var->blue.msb_right = 0; |
869 | 869 | ||
870 | var->transp.length = 0; | 870 | var->transp.length = 0; |
871 | var->transp.offset = 0; | 871 | var->transp.offset = 0; |
872 | var->transp.msb_right = 0; | 872 | var->transp.msb_right = 0; |
873 | break; | 873 | break; |
874 | case 32: | 874 | case 32: |
875 | var->red.length = 8; | 875 | var->red.length = 8; |
876 | var->red.offset = 16; | 876 | var->red.offset = 16; |
877 | var->red.msb_right = 0; | 877 | var->red.msb_right = 0; |
878 | 878 | ||
879 | var->green.length = 8; | 879 | var->green.length = 8; |
880 | var->green.offset = 8; | 880 | var->green.offset = 8; |
881 | var->green.msb_right = 0; | 881 | var->green.msb_right = 0; |
882 | 882 | ||
883 | var->blue.length = 8; | 883 | var->blue.length = 8; |
884 | var->blue.offset = 0; | 884 | var->blue.offset = 0; |
885 | var->blue.msb_right = 0; | 885 | var->blue.msb_right = 0; |
886 | 886 | ||
887 | var->transp.length = 8; | 887 | var->transp.length = 8; |
888 | var->transp.offset = 24; | 888 | var->transp.offset = 24; |
889 | var->transp.msb_right = 0; | 889 | var->transp.msb_right = 0; |
890 | break; | 890 | break; |
891 | } | 891 | } |
892 | 892 | ||
893 | if (var->pixclock < 1000) { | 893 | if (var->pixclock < 1000) { |
894 | htotal = var->xres + var->right_margin + var->hsync_len + | 894 | htotal = var->xres + var->right_margin + var->hsync_len + |
895 | var->left_margin; | 895 | var->left_margin; |
896 | vtotal = var->yres + var->lower_margin + var->vsync_len + | 896 | vtotal = var->yres + var->lower_margin + var->vsync_len + |
897 | var->upper_margin; | 897 | var->upper_margin; |
898 | var->pixclock = (vtotal * htotal * 6UL) / 100UL; | 898 | var->pixclock = (vtotal * htotal * 6UL) / 100UL; |
899 | var->pixclock = KHZ2PICOS(var->pixclock); | 899 | var->pixclock = KHZ2PICOS(var->pixclock); |
900 | dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", | 900 | dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", |
901 | var->pixclock); | 901 | var->pixclock); |
902 | } | 902 | } |
903 | 903 | ||
904 | var->height = -1; | 904 | var->height = -1; |
905 | var->width = -1; | 905 | var->width = -1; |
906 | var->grayscale = 0; | 906 | var->grayscale = 0; |
907 | 907 | ||
908 | /* Preserve sync flags */ | 908 | /* Preserve sync flags */ |
909 | var->sync |= mx3_fbi->sync; | 909 | var->sync |= mx3_fbi->sync; |
910 | mx3_fbi->sync |= var->sync; | 910 | mx3_fbi->sync |= var->sync; |
911 | 911 | ||
912 | return 0; | 912 | return 0; |
913 | } | 913 | } |
914 | 914 | ||
915 | static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) | 915 | static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) |
916 | { | 916 | { |
917 | chan &= 0xffff; | 917 | chan &= 0xffff; |
918 | chan >>= 16 - bf->length; | 918 | chan >>= 16 - bf->length; |
919 | return chan << bf->offset; | 919 | return chan << bf->offset; |
920 | } | 920 | } |
921 | 921 | ||
922 | static int mx3fb_setcolreg(unsigned int regno, unsigned int red, | 922 | static int mx3fb_setcolreg(unsigned int regno, unsigned int red, |
923 | unsigned int green, unsigned int blue, | 923 | unsigned int green, unsigned int blue, |
924 | unsigned int trans, struct fb_info *fbi) | 924 | unsigned int trans, struct fb_info *fbi) |
925 | { | 925 | { |
926 | struct mx3fb_info *mx3_fbi = fbi->par; | 926 | struct mx3fb_info *mx3_fbi = fbi->par; |
927 | u32 val; | 927 | u32 val; |
928 | int ret = 1; | 928 | int ret = 1; |
929 | 929 | ||
930 | dev_dbg(fbi->device, "%s\n", __func__); | 930 | dev_dbg(fbi->device, "%s\n", __func__); |
931 | 931 | ||
932 | mutex_lock(&mx3_fbi->mutex); | 932 | mutex_lock(&mx3_fbi->mutex); |
933 | /* | 933 | /* |
934 | * If greyscale is true, then we convert the RGB value | 934 | * If greyscale is true, then we convert the RGB value |
935 | * to greyscale no matter what visual we are using. | 935 | * to greyscale no matter what visual we are using. |
936 | */ | 936 | */ |
937 | if (fbi->var.grayscale) | 937 | if (fbi->var.grayscale) |
938 | red = green = blue = (19595 * red + 38470 * green + | 938 | red = green = blue = (19595 * red + 38470 * green + |
939 | 7471 * blue) >> 16; | 939 | 7471 * blue) >> 16; |
940 | switch (fbi->fix.visual) { | 940 | switch (fbi->fix.visual) { |
941 | case FB_VISUAL_TRUECOLOR: | 941 | case FB_VISUAL_TRUECOLOR: |
942 | /* | 942 | /* |
943 | * 16-bit True Colour. We encode the RGB value | 943 | * 16-bit True Colour. We encode the RGB value |
944 | * according to the RGB bitfield information. | 944 | * according to the RGB bitfield information. |
945 | */ | 945 | */ |
946 | if (regno < 16) { | 946 | if (regno < 16) { |
947 | u32 *pal = fbi->pseudo_palette; | 947 | u32 *pal = fbi->pseudo_palette; |
948 | 948 | ||
949 | val = chan_to_field(red, &fbi->var.red); | 949 | val = chan_to_field(red, &fbi->var.red); |
950 | val |= chan_to_field(green, &fbi->var.green); | 950 | val |= chan_to_field(green, &fbi->var.green); |
951 | val |= chan_to_field(blue, &fbi->var.blue); | 951 | val |= chan_to_field(blue, &fbi->var.blue); |
952 | 952 | ||
953 | pal[regno] = val; | 953 | pal[regno] = val; |
954 | 954 | ||
955 | ret = 0; | 955 | ret = 0; |
956 | } | 956 | } |
957 | break; | 957 | break; |
958 | 958 | ||
959 | case FB_VISUAL_STATIC_PSEUDOCOLOR: | 959 | case FB_VISUAL_STATIC_PSEUDOCOLOR: |
960 | case FB_VISUAL_PSEUDOCOLOR: | 960 | case FB_VISUAL_PSEUDOCOLOR: |
961 | break; | 961 | break; |
962 | } | 962 | } |
963 | mutex_unlock(&mx3_fbi->mutex); | 963 | mutex_unlock(&mx3_fbi->mutex); |
964 | 964 | ||
965 | return ret; | 965 | return ret; |
966 | } | 966 | } |
967 | 967 | ||
968 | /** | 968 | /** |
@@ -970,152 +970,152 @@ static int mx3fb_setcolreg(unsigned int regno, unsigned int red, | |||
970 | */ | 970 | */ |
971 | static int mx3fb_blank(int blank, struct fb_info *fbi) | 971 | static int mx3fb_blank(int blank, struct fb_info *fbi) |
972 | { | 972 | { |
973 | struct mx3fb_info *mx3_fbi = fbi->par; | 973 | struct mx3fb_info *mx3_fbi = fbi->par; |
974 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; | 974 | struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; |
975 | 975 | ||
976 | dev_dbg(fbi->device, "%s\n", __func__); | 976 | dev_dbg(fbi->device, "%s\n", __func__); |
977 | 977 | ||
978 | dev_dbg(fbi->device, "blank = %d\n", blank); | 978 | dev_dbg(fbi->device, "blank = %d\n", blank); |
979 | 979 | ||
980 | if (mx3_fbi->blank == blank) | 980 | if (mx3_fbi->blank == blank) |
981 | return 0; | 981 | return 0; |
982 | 982 | ||
983 | mutex_lock(&mx3_fbi->mutex); | 983 | mutex_lock(&mx3_fbi->mutex); |
984 | mx3_fbi->blank = blank; | 984 | mx3_fbi->blank = blank; |
985 | 985 | ||
986 | switch (blank) { | 986 | switch (blank) { |
987 | case FB_BLANK_POWERDOWN: | 987 | case FB_BLANK_POWERDOWN: |
988 | case FB_BLANK_VSYNC_SUSPEND: | 988 | case FB_BLANK_VSYNC_SUSPEND: |
989 | case FB_BLANK_HSYNC_SUSPEND: | 989 | case FB_BLANK_HSYNC_SUSPEND: |
990 | case FB_BLANK_NORMAL: | 990 | case FB_BLANK_NORMAL: |
991 | sdc_disable_channel(mx3_fbi); | 991 | sdc_disable_channel(mx3_fbi); |
992 | sdc_set_brightness(mx3fb, 0); | 992 | sdc_set_brightness(mx3fb, 0); |
993 | break; | 993 | break; |
994 | case FB_BLANK_UNBLANK: | 994 | case FB_BLANK_UNBLANK: |
995 | sdc_enable_channel(mx3_fbi); | 995 | sdc_enable_channel(mx3_fbi); |
996 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); | 996 | sdc_set_brightness(mx3fb, mx3fb->backlight_level); |
997 | break; | 997 | break; |
998 | } | 998 | } |
999 | mutex_unlock(&mx3_fbi->mutex); | 999 | mutex_unlock(&mx3_fbi->mutex); |
1000 | 1000 | ||
1001 | return 0; | 1001 | return 0; |
1002 | } | 1002 | } |
1003 | 1003 | ||
1004 | /** | 1004 | /** |
1005 | * mx3fb_pan_display() - pan or wrap the display | 1005 | * mx3fb_pan_display() - pan or wrap the display |
1006 | * @var: variable screen buffer information. | 1006 | * @var: variable screen buffer information. |
1007 | * @info: framebuffer information pointer. | 1007 | * @info: framebuffer information pointer. |
1008 | * | 1008 | * |
1009 | * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag | 1009 | * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag |
1010 | */ | 1010 | */ |
1011 | static int mx3fb_pan_display(struct fb_var_screeninfo *var, | 1011 | static int mx3fb_pan_display(struct fb_var_screeninfo *var, |
1012 | struct fb_info *fbi) | 1012 | struct fb_info *fbi) |
1013 | { | 1013 | { |
1014 | struct mx3fb_info *mx3_fbi = fbi->par; | 1014 | struct mx3fb_info *mx3_fbi = fbi->par; |
1015 | u32 y_bottom; | 1015 | u32 y_bottom; |
1016 | unsigned long base; | 1016 | unsigned long base; |
1017 | off_t offset; | 1017 | off_t offset; |
1018 | dma_cookie_t cookie; | 1018 | dma_cookie_t cookie; |
1019 | struct scatterlist *sg = mx3_fbi->sg; | 1019 | struct scatterlist *sg = mx3_fbi->sg; |
1020 | struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; | 1020 | struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; |
1021 | struct dma_async_tx_descriptor *txd; | 1021 | struct dma_async_tx_descriptor *txd; |
1022 | int ret; | 1022 | int ret; |
1023 | 1023 | ||
1024 | dev_dbg(fbi->device, "%s [%c]\n", __func__, | 1024 | dev_dbg(fbi->device, "%s [%c]\n", __func__, |
1025 | list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); | 1025 | list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); |
1026 | 1026 | ||
1027 | if (var->xoffset > 0) { | 1027 | if (var->xoffset > 0) { |
1028 | dev_dbg(fbi->device, "x panning not supported\n"); | 1028 | dev_dbg(fbi->device, "x panning not supported\n"); |
1029 | return -EINVAL; | 1029 | return -EINVAL; |
1030 | } | 1030 | } |
1031 | 1031 | ||
1032 | if (fbi->var.xoffset == var->xoffset && | 1032 | if (fbi->var.xoffset == var->xoffset && |
1033 | fbi->var.yoffset == var->yoffset) | 1033 | fbi->var.yoffset == var->yoffset) |
1034 | return 0; /* No change, do nothing */ | 1034 | return 0; /* No change, do nothing */ |
1035 | 1035 | ||
1036 | y_bottom = var->yoffset; | 1036 | y_bottom = var->yoffset; |
1037 | 1037 | ||
1038 | if (!(var->vmode & FB_VMODE_YWRAP)) | 1038 | if (!(var->vmode & FB_VMODE_YWRAP)) |
1039 | y_bottom += var->yres; | 1039 | y_bottom += var->yres; |
1040 | 1040 | ||
1041 | if (y_bottom > fbi->var.yres_virtual) | 1041 | if (y_bottom > fbi->var.yres_virtual) |
1042 | return -EINVAL; | 1042 | return -EINVAL; |
1043 | 1043 | ||
1044 | mutex_lock(&mx3_fbi->mutex); | 1044 | mutex_lock(&mx3_fbi->mutex); |
1045 | 1045 | ||
1046 | offset = (var->yoffset * var->xres_virtual + var->xoffset) * | 1046 | offset = (var->yoffset * var->xres_virtual + var->xoffset) * |
1047 | (var->bits_per_pixel / 8); | 1047 | (var->bits_per_pixel / 8); |
1048 | base = fbi->fix.smem_start + offset; | 1048 | base = fbi->fix.smem_start + offset; |
1049 | 1049 | ||
1050 | dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", | 1050 | dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", |
1051 | mx3_fbi->cur_ipu_buf, base); | 1051 | mx3_fbi->cur_ipu_buf, base); |
1052 | 1052 | ||
1053 | /* | 1053 | /* |
1054 | * We enable the End of Frame interrupt, which will free a tx-descriptor, | 1054 | * We enable the End of Frame interrupt, which will free a tx-descriptor, |
1055 | * which we will need for the next device_prep_slave_sg(). The | 1055 | * which we will need for the next device_prep_slave_sg(). The |
1056 | * IRQ-handler will disable the IRQ again. | 1056 | * IRQ-handler will disable the IRQ again. |
1057 | */ | 1057 | */ |
1058 | init_completion(&mx3_fbi->flip_cmpl); | 1058 | init_completion(&mx3_fbi->flip_cmpl); |
1059 | enable_irq(mx3_fbi->idmac_channel->eof_irq); | 1059 | enable_irq(mx3_fbi->idmac_channel->eof_irq); |
1060 | 1060 | ||
1061 | ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); | 1061 | ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); |
1062 | if (ret <= 0) { | 1062 | if (ret <= 0) { |
1063 | mutex_unlock(&mx3_fbi->mutex); | 1063 | mutex_unlock(&mx3_fbi->mutex); |
1064 | dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? | 1064 | dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? |
1065 | "user interrupt" : "timeout"); | 1065 | "user interrupt" : "timeout"); |
1066 | return ret ? : -ETIMEDOUT; | 1066 | return ret ? : -ETIMEDOUT; |
1067 | } | 1067 | } |
1068 | 1068 | ||
1069 | mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; | 1069 | mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; |
1070 | 1070 | ||
1071 | sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; | 1071 | sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; |
1072 | sg_set_page(&sg[mx3_fbi->cur_ipu_buf], | 1072 | sg_set_page(&sg[mx3_fbi->cur_ipu_buf], |
1073 | virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, | 1073 | virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, |
1074 | offset_in_page(fbi->screen_base + offset)); | 1074 | offset_in_page(fbi->screen_base + offset)); |
1075 | 1075 | ||
1076 | txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + | 1076 | txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + |
1077 | mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); | 1077 | mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); |
1078 | if (!txd) { | 1078 | if (!txd) { |
1079 | dev_err(fbi->device, | 1079 | dev_err(fbi->device, |
1080 | "Error preparing a DMA transaction descriptor.\n"); | 1080 | "Error preparing a DMA transaction descriptor.\n"); |
1081 | mutex_unlock(&mx3_fbi->mutex); | 1081 | mutex_unlock(&mx3_fbi->mutex); |
1082 | return -EIO; | 1082 | return -EIO; |
1083 | } | 1083 | } |
1084 | 1084 | ||
1085 | txd->callback_param = txd; | 1085 | txd->callback_param = txd; |
1086 | txd->callback = mx3fb_dma_done; | 1086 | txd->callback = mx3fb_dma_done; |
1087 | 1087 | ||
1088 | /* | 1088 | /* |
1089 | * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() | 1089 | * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() |
1090 | * should switch to another buffer | 1090 | * should switch to another buffer |
1091 | */ | 1091 | */ |
1092 | cookie = txd->tx_submit(txd); | 1092 | cookie = txd->tx_submit(txd); |
1093 | dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); | 1093 | dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); |
1094 | if (cookie < 0) { | 1094 | if (cookie < 0) { |
1095 | dev_err(fbi->device, | 1095 | dev_err(fbi->device, |
1096 | "Error updating SDC buf %d to address=0x%08lX\n", | 1096 | "Error updating SDC buf %d to address=0x%08lX\n", |
1097 | mx3_fbi->cur_ipu_buf, base); | 1097 | mx3_fbi->cur_ipu_buf, base); |
1098 | mutex_unlock(&mx3_fbi->mutex); | 1098 | mutex_unlock(&mx3_fbi->mutex); |
1099 | return -EIO; | 1099 | return -EIO; |
1100 | } | 1100 | } |
1101 | 1101 | ||
1102 | if (mx3_fbi->txd) | 1102 | if (mx3_fbi->txd) |
1103 | async_tx_ack(mx3_fbi->txd); | 1103 | async_tx_ack(mx3_fbi->txd); |
1104 | mx3_fbi->txd = txd; | 1104 | mx3_fbi->txd = txd; |
1105 | 1105 | ||
1106 | fbi->var.xoffset = var->xoffset; | 1106 | fbi->var.xoffset = var->xoffset; |
1107 | fbi->var.yoffset = var->yoffset; | 1107 | fbi->var.yoffset = var->yoffset; |
1108 | 1108 | ||
1109 | if (var->vmode & FB_VMODE_YWRAP) | 1109 | if (var->vmode & FB_VMODE_YWRAP) |
1110 | fbi->var.vmode |= FB_VMODE_YWRAP; | 1110 | fbi->var.vmode |= FB_VMODE_YWRAP; |
1111 | else | 1111 | else |
1112 | fbi->var.vmode &= ~FB_VMODE_YWRAP; | 1112 | fbi->var.vmode &= ~FB_VMODE_YWRAP; |
1113 | 1113 | ||
1114 | mutex_unlock(&mx3_fbi->mutex); | 1114 | mutex_unlock(&mx3_fbi->mutex); |
1115 | 1115 | ||
1116 | dev_dbg(fbi->device, "Update complete\n"); | 1116 | dev_dbg(fbi->device, "Update complete\n"); |
1117 | 1117 | ||
1118 | return 0; | 1118 | return 0; |
1119 | } | 1119 | } |
1120 | 1120 | ||
1121 | /* | 1121 | /* |
@@ -1124,15 +1124,15 @@ static int mx3fb_pan_display(struct fb_var_screeninfo *var, | |||
1124 | * blitting, rectangle filling, copy regions and cursor definition. | 1124 | * blitting, rectangle filling, copy regions and cursor definition. |
1125 | */ | 1125 | */ |
1126 | static struct fb_ops mx3fb_ops = { | 1126 | static struct fb_ops mx3fb_ops = { |
1127 | .owner = THIS_MODULE, | 1127 | .owner = THIS_MODULE, |
1128 | .fb_set_par = mx3fb_set_par, | 1128 | .fb_set_par = mx3fb_set_par, |
1129 | .fb_check_var = mx3fb_check_var, | 1129 | .fb_check_var = mx3fb_check_var, |
1130 | .fb_setcolreg = mx3fb_setcolreg, | 1130 | .fb_setcolreg = mx3fb_setcolreg, |
1131 | .fb_pan_display = mx3fb_pan_display, | 1131 | .fb_pan_display = mx3fb_pan_display, |
1132 | .fb_fillrect = cfb_fillrect, | 1132 | .fb_fillrect = cfb_fillrect, |
1133 | .fb_copyarea = cfb_copyarea, | 1133 | .fb_copyarea = cfb_copyarea, |
1134 | .fb_imageblit = cfb_imageblit, | 1134 | .fb_imageblit = cfb_imageblit, |
1135 | .fb_blank = mx3fb_blank, | 1135 | .fb_blank = mx3fb_blank, |
1136 | }; | 1136 | }; |
1137 | 1137 | ||
1138 | #ifdef CONFIG_PM | 1138 | #ifdef CONFIG_PM |
@@ -1146,19 +1146,19 @@ static struct fb_ops mx3fb_ops = { | |||
1146 | */ | 1146 | */ |
1147 | static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) | 1147 | static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) |
1148 | { | 1148 | { |
1149 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); | 1149 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); |
1150 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; | 1150 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; |
1151 | 1151 | ||
1152 | acquire_console_sem(); | 1152 | acquire_console_sem(); |
1153 | fb_set_suspend(drv_data->fbi, 1); | 1153 | fb_set_suspend(drv_data->fbi, 1); |
1154 | release_console_sem(); | 1154 | release_console_sem(); |
1155 | 1155 | ||
1156 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | 1156 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { |
1157 | sdc_disable_channel(mx3_fbi); | 1157 | sdc_disable_channel(mx3_fbi); |
1158 | sdc_set_brightness(mx3fb, 0); | 1158 | sdc_set_brightness(mx3fb, 0); |
1159 | 1159 | ||
1160 | } | 1160 | } |
1161 | return 0; | 1161 | return 0; |
1162 | } | 1162 | } |
1163 | 1163 | ||
1164 | /* | 1164 | /* |
@@ -1166,19 +1166,19 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) | |||
1166 | */ | 1166 | */ |
1167 | static int mx3fb_resume(struct platform_device *pdev) | 1167 | static int mx3fb_resume(struct platform_device *pdev) |
1168 | { | 1168 | { |
1169 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); | 1169 | struct mx3fb_data *drv_data = platform_get_drvdata(pdev); |
1170 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; | 1170 | struct mx3fb_info *mx3_fbi = drv_data->fbi->par; |
1171 | 1171 | ||
1172 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { | 1172 | if (mx3_fbi->blank == FB_BLANK_UNBLANK) { |
1173 | sdc_enable_channel(mx3_fbi); | 1173 | sdc_enable_channel(mx3_fbi); |
1174 | sdc_set_brightness(mx3fb, drv_data->backlight_level); | 1174 | sdc_set_brightness(mx3fb, drv_data->backlight_level); |
1175 | } | 1175 | } |
1176 | 1176 | ||
1177 | acquire_console_sem(); | 1177 | acquire_console_sem(); |
1178 | fb_set_suspend(drv_data->fbi, 0); | 1178 | fb_set_suspend(drv_data->fbi, 0); |
1179 | release_console_sem(); | 1179 | release_console_sem(); |
1180 | 1180 | ||
1181 | return 0; | 1181 | return 0; |
1182 | } | 1182 | } |
1183 | #else | 1183 | #else |
1184 | #define mx3fb_suspend NULL | 1184 | #define mx3fb_suspend NULL |
@@ -1191,8 +1191,8 @@ static int mx3fb_resume(struct platform_device *pdev) | |||
1191 | 1191 | ||
1192 | /** | 1192 | /** |
1193 | * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. | 1193 | * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. |
1194 | * @fbi: framebuffer information pointer | 1194 | * @fbi: framebuffer information pointer |
1195 | * @return: Error code indicating success or failure | 1195 | * @return: Error code indicating success or failure |
1196 | * | 1196 | * |
1197 | * This buffer is remapped into a non-cached, non-buffered, memory region to | 1197 | * This buffer is remapped into a non-cached, non-buffered, memory region to |
1198 | * allow palette and pixel writes to occur without flushing the cache. Once this | 1198 | * allow palette and pixel writes to occur without flushing the cache. Once this |
@@ -1201,349 +1201,349 @@ static int mx3fb_resume(struct platform_device *pdev) | |||
1201 | */ | 1201 | */ |
1202 | static int mx3fb_map_video_memory(struct fb_info *fbi) | 1202 | static int mx3fb_map_video_memory(struct fb_info *fbi) |
1203 | { | 1203 | { |
1204 | int retval = 0; | 1204 | int retval = 0; |
1205 | dma_addr_t addr; | 1205 | dma_addr_t addr; |
1206 | 1206 | ||
1207 | fbi->screen_base = dma_alloc_writecombine(fbi->device, | 1207 | fbi->screen_base = dma_alloc_writecombine(fbi->device, |
1208 | fbi->fix.smem_len, | 1208 | fbi->fix.smem_len, |
1209 | &addr, GFP_DMA); | 1209 | &addr, GFP_DMA); |
1210 | 1210 | ||
1211 | if (!fbi->screen_base) { | 1211 | if (!fbi->screen_base) { |
1212 | dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", | 1212 | dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", |
1213 | fbi->fix.smem_len); | 1213 | fbi->fix.smem_len); |
1214 | retval = -EBUSY; | 1214 | retval = -EBUSY; |
1215 | goto err0; | 1215 | goto err0; |
1216 | } | 1216 | } |
1217 | 1217 | ||
1218 | fbi->fix.smem_start = addr; | 1218 | fbi->fix.smem_start = addr; |
1219 | 1219 | ||
1220 | dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", | 1220 | dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", |
1221 | (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); | 1221 | (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); |
1222 | 1222 | ||
1223 | fbi->screen_size = fbi->fix.smem_len; | 1223 | fbi->screen_size = fbi->fix.smem_len; |
1224 | 1224 | ||
1225 | /* Clear the screen */ | 1225 | /* Clear the screen */ |
1226 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); | 1226 | memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); |
1227 | 1227 | ||
1228 | return 0; | 1228 | return 0; |
1229 | 1229 | ||
1230 | err0: | 1230 | err0: |
1231 | fbi->fix.smem_len = 0; | 1231 | fbi->fix.smem_len = 0; |
1232 | fbi->fix.smem_start = 0; | 1232 | fbi->fix.smem_start = 0; |
1233 | fbi->screen_base = NULL; | 1233 | fbi->screen_base = NULL; |
1234 | return retval; | 1234 | return retval; |
1235 | } | 1235 | } |
1236 | 1236 | ||
1237 | /** | 1237 | /** |
1238 | * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. | 1238 | * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. |
1239 | * @fbi: framebuffer information pointer | 1239 | * @fbi: framebuffer information pointer |
1240 | * @return: error code indicating success or failure | 1240 | * @return: error code indicating success or failure |
1241 | */ | 1241 | */ |
1242 | static int mx3fb_unmap_video_memory(struct fb_info *fbi) | 1242 | static int mx3fb_unmap_video_memory(struct fb_info *fbi) |
1243 | { | 1243 | { |
1244 | dma_free_writecombine(fbi->device, fbi->fix.smem_len, | 1244 | dma_free_writecombine(fbi->device, fbi->fix.smem_len, |
1245 | fbi->screen_base, fbi->fix.smem_start); | 1245 | fbi->screen_base, fbi->fix.smem_start); |
1246 | 1246 | ||
1247 | fbi->screen_base = 0; | 1247 | fbi->screen_base = 0; |
1248 | fbi->fix.smem_start = 0; | 1248 | fbi->fix.smem_start = 0; |
1249 | fbi->fix.smem_len = 0; | 1249 | fbi->fix.smem_len = 0; |
1250 | return 0; | 1250 | return 0; |
1251 | } | 1251 | } |
1252 | 1252 | ||
1253 | /** | 1253 | /** |
1254 | * mx3fb_init_fbinfo() - initialize framebuffer information object. | 1254 | * mx3fb_init_fbinfo() - initialize framebuffer information object. |
1255 | * @return: initialized framebuffer structure. | 1255 | * @return: initialized framebuffer structure. |
1256 | */ | 1256 | */ |
1257 | static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) | 1257 | static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) |
1258 | { | 1258 | { |
1259 | struct fb_info *fbi; | 1259 | struct fb_info *fbi; |
1260 | struct mx3fb_info *mx3fbi; | 1260 | struct mx3fb_info *mx3fbi; |
1261 | int ret; | 1261 | int ret; |
1262 | 1262 | ||
1263 | /* Allocate sufficient memory for the fb structure */ | 1263 | /* Allocate sufficient memory for the fb structure */ |
1264 | fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); | 1264 | fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); |
1265 | if (!fbi) | 1265 | if (!fbi) |
1266 | return NULL; | 1266 | return NULL; |
1267 | 1267 | ||
1268 | mx3fbi = fbi->par; | 1268 | mx3fbi = fbi->par; |
1269 | mx3fbi->cookie = -EINVAL; | 1269 | mx3fbi->cookie = -EINVAL; |
1270 | mx3fbi->cur_ipu_buf = 0; | 1270 | mx3fbi->cur_ipu_buf = 0; |
1271 | 1271 | ||
1272 | fbi->var.activate = FB_ACTIVATE_NOW; | 1272 | fbi->var.activate = FB_ACTIVATE_NOW; |
1273 | 1273 | ||
1274 | fbi->fbops = ops; | 1274 | fbi->fbops = ops; |
1275 | fbi->flags = FBINFO_FLAG_DEFAULT; | 1275 | fbi->flags = FBINFO_FLAG_DEFAULT; |
1276 | fbi->pseudo_palette = mx3fbi->pseudo_palette; | 1276 | fbi->pseudo_palette = mx3fbi->pseudo_palette; |
1277 | 1277 | ||
1278 | mutex_init(&mx3fbi->mutex); | 1278 | mutex_init(&mx3fbi->mutex); |
1279 | 1279 | ||
1280 | /* Allocate colormap */ | 1280 | /* Allocate colormap */ |
1281 | ret = fb_alloc_cmap(&fbi->cmap, 16, 0); | 1281 | ret = fb_alloc_cmap(&fbi->cmap, 16, 0); |
1282 | if (ret < 0) { | 1282 | if (ret < 0) { |
1283 | framebuffer_release(fbi); | 1283 | framebuffer_release(fbi); |
1284 | return NULL; | 1284 | return NULL; |
1285 | } | 1285 | } |
1286 | 1286 | ||
1287 | return fbi; | 1287 | return fbi; |
1288 | } | 1288 | } |
1289 | 1289 | ||
1290 | static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) | 1290 | static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) |
1291 | { | 1291 | { |
1292 | struct device *dev = mx3fb->dev; | 1292 | struct device *dev = mx3fb->dev; |
1293 | struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; | 1293 | struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; |
1294 | const char *name = mx3fb_pdata->name; | 1294 | const char *name = mx3fb_pdata->name; |
1295 | unsigned int irq; | 1295 | unsigned int irq; |
1296 | struct fb_info *fbi; | 1296 | struct fb_info *fbi; |
1297 | struct mx3fb_info *mx3fbi; | 1297 | struct mx3fb_info *mx3fbi; |
1298 | const struct fb_videomode *mode; | 1298 | const struct fb_videomode *mode; |
1299 | int ret, num_modes; | 1299 | int ret, num_modes; |
1300 | 1300 | ||
1301 | ichan->client = mx3fb; | 1301 | ichan->client = mx3fb; |
1302 | irq = ichan->eof_irq; | 1302 | irq = ichan->eof_irq; |
1303 | 1303 | ||
1304 | if (ichan->dma_chan.chan_id != IDMAC_SDC_0) | 1304 | if (ichan->dma_chan.chan_id != IDMAC_SDC_0) |
1305 | return -EINVAL; | 1305 | return -EINVAL; |
1306 | 1306 | ||
1307 | fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); | 1307 | fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); |
1308 | if (!fbi) | 1308 | if (!fbi) |
1309 | return -ENOMEM; | 1309 | return -ENOMEM; |
1310 | 1310 | ||
1311 | if (!fb_mode) | 1311 | if (!fb_mode) |
1312 | fb_mode = name; | 1312 | fb_mode = name; |
1313 | 1313 | ||
1314 | if (!fb_mode) { | 1314 | if (!fb_mode) { |
1315 | ret = -EINVAL; | 1315 | ret = -EINVAL; |
1316 | goto emode; | 1316 | goto emode; |
1317 | } | 1317 | } |
1318 | 1318 | ||
1319 | if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { | 1319 | if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { |
1320 | mode = mx3fb_pdata->mode; | 1320 | mode = mx3fb_pdata->mode; |
1321 | num_modes = mx3fb_pdata->num_modes; | 1321 | num_modes = mx3fb_pdata->num_modes; |
1322 | } else { | 1322 | } else { |
1323 | mode = mx3fb_modedb; | 1323 | mode = mx3fb_modedb; |
1324 | num_modes = ARRAY_SIZE(mx3fb_modedb); | 1324 | num_modes = ARRAY_SIZE(mx3fb_modedb); |
1325 | } | 1325 | } |
1326 | 1326 | ||
1327 | if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, | 1327 | if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, |
1328 | num_modes, NULL, default_bpp)) { | 1328 | num_modes, NULL, default_bpp)) { |
1329 | ret = -EBUSY; | 1329 | ret = -EBUSY; |
1330 | goto emode; | 1330 | goto emode; |
1331 | } | 1331 | } |
1332 | 1332 | ||
1333 | fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); | 1333 | fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); |
1334 | 1334 | ||
1335 | /* Default Y virtual size is 2x panel size */ | 1335 | /* Default Y virtual size is 2x panel size */ |
1336 | fbi->var.yres_virtual = fbi->var.yres * 2; | 1336 | fbi->var.yres_virtual = fbi->var.yres * 2; |
1337 | 1337 | ||
1338 | mx3fb->fbi = fbi; | 1338 | mx3fb->fbi = fbi; |
1339 | 1339 | ||
1340 | /* set Display Interface clock period */ | 1340 | /* set Display Interface clock period */ |
1341 | mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); | 1341 | mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); |
1342 | /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ | 1342 | /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ |
1343 | 1343 | ||
1344 | sdc_set_brightness(mx3fb, 255); | 1344 | sdc_set_brightness(mx3fb, 255); |
1345 | sdc_set_global_alpha(mx3fb, true, 0xFF); | 1345 | sdc_set_global_alpha(mx3fb, true, 0xFF); |
1346 | sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); | 1346 | sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); |
1347 | 1347 | ||
1348 | mx3fbi = fbi->par; | 1348 | mx3fbi = fbi->par; |
1349 | mx3fbi->idmac_channel = ichan; | 1349 | mx3fbi->idmac_channel = ichan; |
1350 | mx3fbi->ipu_ch = ichan->dma_chan.chan_id; | 1350 | mx3fbi->ipu_ch = ichan->dma_chan.chan_id; |
1351 | mx3fbi->mx3fb = mx3fb; | 1351 | mx3fbi->mx3fb = mx3fb; |
1352 | mx3fbi->blank = FB_BLANK_NORMAL; | 1352 | mx3fbi->blank = FB_BLANK_NORMAL; |
1353 | 1353 | ||
1354 | init_completion(&mx3fbi->flip_cmpl); | 1354 | init_completion(&mx3fbi->flip_cmpl); |
1355 | disable_irq(ichan->eof_irq); | 1355 | disable_irq(ichan->eof_irq); |
1356 | dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); | 1356 | dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); |
1357 | ret = mx3fb_set_par(fbi); | 1357 | ret = mx3fb_set_par(fbi); |
1358 | if (ret < 0) | 1358 | if (ret < 0) |
1359 | goto esetpar; | 1359 | goto esetpar; |
1360 | 1360 | ||
1361 | mx3fb_blank(FB_BLANK_UNBLANK, fbi); | 1361 | mx3fb_blank(FB_BLANK_UNBLANK, fbi); |
1362 | 1362 | ||
1363 | dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); | 1363 | dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); |
1364 | 1364 | ||
1365 | ret = register_framebuffer(fbi); | 1365 | ret = register_framebuffer(fbi); |
1366 | if (ret < 0) | 1366 | if (ret < 0) |
1367 | goto erfb; | 1367 | goto erfb; |
1368 | 1368 | ||
1369 | return 0; | 1369 | return 0; |
1370 | 1370 | ||
1371 | erfb: | 1371 | erfb: |
1372 | esetpar: | 1372 | esetpar: |
1373 | emode: | 1373 | emode: |
1374 | fb_dealloc_cmap(&fbi->cmap); | 1374 | fb_dealloc_cmap(&fbi->cmap); |
1375 | framebuffer_release(fbi); | 1375 | framebuffer_release(fbi); |
1376 | 1376 | ||
1377 | return ret; | 1377 | return ret; |
1378 | } | 1378 | } |
1379 | 1379 | ||
1380 | static bool chan_filter(struct dma_chan *chan, void *arg) | 1380 | static bool chan_filter(struct dma_chan *chan, void *arg) |
1381 | { | 1381 | { |
1382 | struct dma_chan_request *rq = arg; | 1382 | struct dma_chan_request *rq = arg; |
1383 | struct device *dev; | 1383 | struct device *dev; |
1384 | struct mx3fb_platform_data *mx3fb_pdata; | 1384 | struct mx3fb_platform_data *mx3fb_pdata; |
1385 | 1385 | ||
1386 | if (!rq) | 1386 | if (!rq) |
1387 | return false; | 1387 | return false; |
1388 | 1388 | ||
1389 | dev = rq->mx3fb->dev; | 1389 | dev = rq->mx3fb->dev; |
1390 | mx3fb_pdata = dev->platform_data; | 1390 | mx3fb_pdata = dev->platform_data; |
1391 | 1391 | ||
1392 | return rq->id == chan->chan_id && | 1392 | return rq->id == chan->chan_id && |
1393 | mx3fb_pdata->dma_dev == chan->device->dev; | 1393 | mx3fb_pdata->dma_dev == chan->device->dev; |
1394 | } | 1394 | } |
1395 | 1395 | ||
1396 | static void release_fbi(struct fb_info *fbi) | 1396 | static void release_fbi(struct fb_info *fbi) |
1397 | { | 1397 | { |
1398 | mx3fb_unmap_video_memory(fbi); | 1398 | mx3fb_unmap_video_memory(fbi); |
1399 | 1399 | ||
1400 | fb_dealloc_cmap(&fbi->cmap); | 1400 | fb_dealloc_cmap(&fbi->cmap); |
1401 | 1401 | ||
1402 | unregister_framebuffer(fbi); | 1402 | unregister_framebuffer(fbi); |
1403 | framebuffer_release(fbi); | 1403 | framebuffer_release(fbi); |
1404 | } | 1404 | } |
1405 | 1405 | ||
1406 | static int mx3fb_probe(struct platform_device *pdev) | 1406 | static int mx3fb_probe(struct platform_device *pdev) |
1407 | { | 1407 | { |
1408 | struct device *dev = &pdev->dev; | 1408 | struct device *dev = &pdev->dev; |
1409 | int ret; | 1409 | int ret; |
1410 | struct resource *sdc_reg; | 1410 | struct resource *sdc_reg; |
1411 | struct mx3fb_data *mx3fb; | 1411 | struct mx3fb_data *mx3fb; |
1412 | dma_cap_mask_t mask; | 1412 | dma_cap_mask_t mask; |
1413 | struct dma_chan *chan; | 1413 | struct dma_chan *chan; |
1414 | struct dma_chan_request rq; | 1414 | struct dma_chan_request rq; |
1415 | 1415 | ||
1416 | /* | 1416 | /* |
1417 | * Display Interface (DI) and Synchronous Display Controller (SDC) | 1417 | * Display Interface (DI) and Synchronous Display Controller (SDC) |
1418 | * registers | 1418 | * registers |
1419 | */ | 1419 | */ |
1420 | sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 1420 | sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
1421 | if (!sdc_reg) | 1421 | if (!sdc_reg) |
1422 | return -EINVAL; | 1422 | return -EINVAL; |
1423 | 1423 | ||
1424 | mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); | 1424 | mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); |
1425 | if (!mx3fb) | 1425 | if (!mx3fb) |
1426 | return -ENOMEM; | 1426 | return -ENOMEM; |
1427 | 1427 | ||
1428 | spin_lock_init(&mx3fb->lock); | 1428 | spin_lock_init(&mx3fb->lock); |
1429 | 1429 | ||
1430 | mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); | 1430 | mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); |
1431 | if (!mx3fb->reg_base) { | 1431 | if (!mx3fb->reg_base) { |
1432 | ret = -ENOMEM; | 1432 | ret = -ENOMEM; |
1433 | goto eremap; | 1433 | goto eremap; |
1434 | } | 1434 | } |
1435 | 1435 | ||
1436 | pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, | 1436 | pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, |
1437 | mx3fb->reg_base); | 1437 | mx3fb->reg_base); |
1438 | 1438 | ||
1439 | /* IDMAC interface */ | 1439 | /* IDMAC interface */ |
1440 | dmaengine_get(); | 1440 | dmaengine_get(); |
1441 | 1441 | ||
1442 | mx3fb->dev = dev; | 1442 | mx3fb->dev = dev; |
1443 | platform_set_drvdata(pdev, mx3fb); | 1443 | platform_set_drvdata(pdev, mx3fb); |
1444 | 1444 | ||
1445 | rq.mx3fb = mx3fb; | 1445 | rq.mx3fb = mx3fb; |
1446 | 1446 | ||
1447 | dma_cap_zero(mask); | 1447 | dma_cap_zero(mask); |
1448 | dma_cap_set(DMA_SLAVE, mask); | 1448 | dma_cap_set(DMA_SLAVE, mask); |
1449 | dma_cap_set(DMA_PRIVATE, mask); | 1449 | dma_cap_set(DMA_PRIVATE, mask); |
1450 | rq.id = IDMAC_SDC_0; | 1450 | rq.id = IDMAC_SDC_0; |
1451 | chan = dma_request_channel(mask, chan_filter, &rq); | 1451 | chan = dma_request_channel(mask, chan_filter, &rq); |
1452 | if (!chan) { | 1452 | if (!chan) { |
1453 | ret = -EBUSY; | 1453 | ret = -EBUSY; |
1454 | goto ersdc0; | 1454 | goto ersdc0; |
1455 | } | 1455 | } |
1456 | 1456 | ||
1457 | ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); | 1457 | ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); |
1458 | if (ret < 0) | 1458 | if (ret < 0) |
1459 | goto eisdc0; | 1459 | goto eisdc0; |
1460 | 1460 | ||
1461 | mx3fb->backlight_level = 255; | 1461 | mx3fb->backlight_level = 255; |
1462 | 1462 | ||
1463 | return 0; | 1463 | return 0; |
1464 | 1464 | ||
1465 | eisdc0: | 1465 | eisdc0: |
1466 | dma_release_channel(chan); | 1466 | dma_release_channel(chan); |
1467 | ersdc0: | 1467 | ersdc0: |
1468 | dmaengine_put(); | 1468 | dmaengine_put(); |
1469 | iounmap(mx3fb->reg_base); | 1469 | iounmap(mx3fb->reg_base); |
1470 | eremap: | 1470 | eremap: |
1471 | kfree(mx3fb); | 1471 | kfree(mx3fb); |
1472 | dev_err(dev, "mx3fb: failed to register fb\n"); | 1472 | dev_err(dev, "mx3fb: failed to register fb\n"); |
1473 | return ret; | 1473 | return ret; |
1474 | } | 1474 | } |
1475 | 1475 | ||
1476 | static int mx3fb_remove(struct platform_device *dev) | 1476 | static int mx3fb_remove(struct platform_device *dev) |
1477 | { | 1477 | { |
1478 | struct mx3fb_data *mx3fb = platform_get_drvdata(dev); | 1478 | struct mx3fb_data *mx3fb = platform_get_drvdata(dev); |
1479 | struct fb_info *fbi = mx3fb->fbi; | 1479 | struct fb_info *fbi = mx3fb->fbi; |
1480 | struct mx3fb_info *mx3_fbi = fbi->par; | 1480 | struct mx3fb_info *mx3_fbi = fbi->par; |
1481 | struct dma_chan *chan; | 1481 | struct dma_chan *chan; |
1482 | 1482 | ||
1483 | chan = &mx3_fbi->idmac_channel->dma_chan; | 1483 | chan = &mx3_fbi->idmac_channel->dma_chan; |
1484 | release_fbi(fbi); | 1484 | release_fbi(fbi); |
1485 | 1485 | ||
1486 | dma_release_channel(chan); | 1486 | dma_release_channel(chan); |
1487 | dmaengine_put(); | 1487 | dmaengine_put(); |
1488 | 1488 | ||
1489 | iounmap(mx3fb->reg_base); | 1489 | iounmap(mx3fb->reg_base); |
1490 | kfree(mx3fb); | 1490 | kfree(mx3fb); |
1491 | return 0; | 1491 | return 0; |
1492 | } | 1492 | } |
1493 | 1493 | ||
1494 | static struct platform_driver mx3fb_driver = { | 1494 | static struct platform_driver mx3fb_driver = { |
1495 | .driver = { | 1495 | .driver = { |
1496 | .name = MX3FB_NAME, | 1496 | .name = MX3FB_NAME, |
1497 | }, | 1497 | }, |
1498 | .probe = mx3fb_probe, | 1498 | .probe = mx3fb_probe, |
1499 | .remove = mx3fb_remove, | 1499 | .remove = mx3fb_remove, |
1500 | .suspend = mx3fb_suspend, | 1500 | .suspend = mx3fb_suspend, |
1501 | .resume = mx3fb_resume, | 1501 | .resume = mx3fb_resume, |
1502 | }; | 1502 | }; |
1503 | 1503 | ||
1504 | /* | 1504 | /* |
1505 | * Parse user specified options (`video=mx3fb:') | 1505 | * Parse user specified options (`video=mx3fb:') |
1506 | * example: | 1506 | * example: |
1507 | * video=mx3fb:bpp=16 | 1507 | * video=mx3fb:bpp=16 |
1508 | */ | 1508 | */ |
1509 | static int mx3fb_setup(void) | 1509 | static int mx3fb_setup(void) |
1510 | { | 1510 | { |
1511 | #ifndef MODULE | 1511 | #ifndef MODULE |
1512 | char *opt, *options = NULL; | 1512 | char *opt, *options = NULL; |
1513 | 1513 | ||
1514 | if (fb_get_options("mx3fb", &options)) | 1514 | if (fb_get_options("mx3fb", &options)) |
1515 | return -ENODEV; | 1515 | return -ENODEV; |
1516 | 1516 | ||
1517 | if (!options || !*options) | 1517 | if (!options || !*options) |
1518 | return 0; | 1518 | return 0; |
1519 | 1519 | ||
1520 | while ((opt = strsep(&options, ",")) != NULL) { | 1520 | while ((opt = strsep(&options, ",")) != NULL) { |
1521 | if (!*opt) | 1521 | if (!*opt) |
1522 | continue; | 1522 | continue; |
1523 | if (!strncmp(opt, "bpp=", 4)) | 1523 | if (!strncmp(opt, "bpp=", 4)) |
1524 | default_bpp = simple_strtoul(opt + 4, NULL, 0); | 1524 | default_bpp = simple_strtoul(opt + 4, NULL, 0); |
1525 | else | 1525 | else |
1526 | fb_mode = opt; | 1526 | fb_mode = opt; |
1527 | } | 1527 | } |
1528 | #endif | 1528 | #endif |
1529 | 1529 | ||
1530 | return 0; | 1530 | return 0; |
1531 | } | 1531 | } |
1532 | 1532 | ||
1533 | static int __init mx3fb_init(void) | 1533 | static int __init mx3fb_init(void) |
1534 | { | 1534 | { |
1535 | int ret = mx3fb_setup(); | 1535 | int ret = mx3fb_setup(); |
1536 | 1536 | ||
1537 | if (ret < 0) | 1537 | if (ret < 0) |
1538 | return ret; | 1538 | return ret; |
1539 | 1539 | ||
1540 | ret = platform_driver_register(&mx3fb_driver); | 1540 | ret = platform_driver_register(&mx3fb_driver); |
1541 | return ret; | 1541 | return ret; |
1542 | } | 1542 | } |
1543 | 1543 | ||
1544 | static void __exit mx3fb_exit(void) | 1544 | static void __exit mx3fb_exit(void) |
1545 | { | 1545 | { |
1546 | platform_driver_unregister(&mx3fb_driver); | 1546 | platform_driver_unregister(&mx3fb_driver); |
1547 | } | 1547 | } |
1548 | 1548 | ||
1549 | module_init(mx3fb_init); | 1549 | module_init(mx3fb_init); |
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 2552b9f325e..84f63205c46 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c | |||
@@ -59,7 +59,6 @@ | |||
59 | #include <asm/io.h> | 59 | #include <asm/io.h> |
60 | #include <asm/irq.h> | 60 | #include <asm/irq.h> |
61 | #include <asm/div64.h> | 61 | #include <asm/div64.h> |
62 | #include <mach/pxa-regs.h> | ||
63 | #include <mach/bitfield.h> | 62 | #include <mach/bitfield.h> |
64 | #include <mach/pxafb.h> | 63 | #include <mach/pxafb.h> |
65 | 64 | ||
@@ -883,10 +882,21 @@ static void __devinit init_pxafb_overlay(struct pxafb_info *fbi, | |||
883 | init_completion(&ofb->branch_done); | 882 | init_completion(&ofb->branch_done); |
884 | } | 883 | } |
885 | 884 | ||
885 | static inline int pxafb_overlay_supported(void) | ||
886 | { | ||
887 | if (cpu_is_pxa27x() || cpu_is_pxa3xx()) | ||
888 | return 1; | ||
889 | |||
890 | return 0; | ||
891 | } | ||
892 | |||
886 | static int __devinit pxafb_overlay_init(struct pxafb_info *fbi) | 893 | static int __devinit pxafb_overlay_init(struct pxafb_info *fbi) |
887 | { | 894 | { |
888 | int i, ret; | 895 | int i, ret; |
889 | 896 | ||
897 | if (!pxafb_overlay_supported()) | ||
898 | return 0; | ||
899 | |||
890 | for (i = 0; i < 2; i++) { | 900 | for (i = 0; i < 2; i++) { |
891 | init_pxafb_overlay(fbi, &fbi->overlay[i], i); | 901 | init_pxafb_overlay(fbi, &fbi->overlay[i], i); |
892 | ret = register_framebuffer(&fbi->overlay[i].fb); | 902 | ret = register_framebuffer(&fbi->overlay[i].fb); |
@@ -909,6 +919,9 @@ static void __devexit pxafb_overlay_exit(struct pxafb_info *fbi) | |||
909 | { | 919 | { |
910 | int i; | 920 | int i; |
911 | 921 | ||
922 | if (!pxafb_overlay_supported()) | ||
923 | return; | ||
924 | |||
912 | for (i = 0; i < 2; i++) | 925 | for (i = 0; i < 2; i++) |
913 | unregister_framebuffer(&fbi->overlay[i].fb); | 926 | unregister_framebuffer(&fbi->overlay[i].fb); |
914 | } | 927 | } |
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 79cf0b1976a..b0b4513ba53 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c | |||
@@ -1017,6 +1017,10 @@ static int s3c2410fb_resume(struct platform_device *dev) | |||
1017 | 1017 | ||
1018 | s3c2410fb_init_registers(fbinfo); | 1018 | s3c2410fb_init_registers(fbinfo); |
1019 | 1019 | ||
1020 | /* re-activate our display after resume */ | ||
1021 | s3c2410fb_activate_var(fbinfo); | ||
1022 | s3c2410fb_blank(FB_BLANK_UNBLANK, fbinfo); | ||
1023 | |||
1020 | return 0; | 1024 | return 0; |
1021 | } | 1025 | } |
1022 | 1026 | ||
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 076f946fa0f..fad58cf9ef7 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c | |||
@@ -176,9 +176,9 @@ | |||
176 | #include <linux/platform_device.h> | 176 | #include <linux/platform_device.h> |
177 | #include <linux/dma-mapping.h> | 177 | #include <linux/dma-mapping.h> |
178 | #include <linux/mutex.h> | 178 | #include <linux/mutex.h> |
179 | #include <linux/io.h> | ||
179 | 180 | ||
180 | #include <mach/hardware.h> | 181 | #include <mach/hardware.h> |
181 | #include <asm/io.h> | ||
182 | #include <asm/mach-types.h> | 182 | #include <asm/mach-types.h> |
183 | #include <mach/assabet.h> | 183 | #include <mach/assabet.h> |
184 | #include <mach/shannon.h> | 184 | #include <mach/shannon.h> |
@@ -251,22 +251,6 @@ static struct sa1100fb_mach_info pal_info __initdata = { | |||
251 | #endif | 251 | #endif |
252 | #endif | 252 | #endif |
253 | 253 | ||
254 | #ifdef CONFIG_SA1100_H3800 | ||
255 | static struct sa1100fb_mach_info h3800_info __initdata = { | ||
256 | .pixclock = 174757, .bpp = 16, | ||
257 | .xres = 320, .yres = 240, | ||
258 | |||
259 | .hsync_len = 3, .vsync_len = 3, | ||
260 | .left_margin = 12, .upper_margin = 10, | ||
261 | .right_margin = 17, .lower_margin = 1, | ||
262 | |||
263 | .cmap_static = 1, | ||
264 | |||
265 | .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, | ||
266 | .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), | ||
267 | }; | ||
268 | #endif | ||
269 | |||
270 | #ifdef CONFIG_SA1100_H3600 | 254 | #ifdef CONFIG_SA1100_H3600 |
271 | static struct sa1100fb_mach_info h3600_info __initdata = { | 255 | static struct sa1100fb_mach_info h3600_info __initdata = { |
272 | .pixclock = 174757, .bpp = 16, | 256 | .pixclock = 174757, .bpp = 16, |
@@ -432,11 +416,6 @@ sa1100fb_get_machine_info(struct sa1100fb_info *fbi) | |||
432 | fbi->rgb[RGB_16] = &h3600_rgb_16; | 416 | fbi->rgb[RGB_16] = &h3600_rgb_16; |
433 | } | 417 | } |
434 | #endif | 418 | #endif |
435 | #ifdef CONFIG_SA1100_H3800 | ||
436 | if (machine_is_h3800()) { | ||
437 | inf = &h3800_info; | ||
438 | } | ||
439 | #endif | ||
440 | #ifdef CONFIG_SA1100_COLLIE | 419 | #ifdef CONFIG_SA1100_COLLIE |
441 | if (machine_is_collie()) { | 420 | if (machine_is_collie()) { |
442 | inf = &collie_info; | 421 | inf = &collie_info; |
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index b9d74d0b353..65244c02551 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c | |||
@@ -116,7 +116,7 @@ static int __init mxc_w1_probe(struct platform_device *pdev) | |||
116 | if (!mdev) | 116 | if (!mdev) |
117 | return -ENOMEM; | 117 | return -ENOMEM; |
118 | 118 | ||
119 | mdev->clk = clk_get(&pdev->dev, "owire_clk"); | 119 | mdev->clk = clk_get(&pdev->dev, "owire"); |
120 | if (!mdev->clk) { | 120 | if (!mdev->clk) { |
121 | err = -ENODEV; | 121 | err = -ENODEV; |
122 | goto failed_clk; | 122 | goto failed_clk; |
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c index c973889110c..a7e3b706b9d 100644 --- a/drivers/w1/masters/omap_hdq.c +++ b/drivers/w1/masters/omap_hdq.c | |||
@@ -590,8 +590,8 @@ static int __init omap_hdq_probe(struct platform_device *pdev) | |||
590 | } | 590 | } |
591 | 591 | ||
592 | /* get interface & functional clock objects */ | 592 | /* get interface & functional clock objects */ |
593 | hdq_data->hdq_ick = clk_get(&pdev->dev, "hdq_ick"); | 593 | hdq_data->hdq_ick = clk_get(&pdev->dev, "ick"); |
594 | hdq_data->hdq_fck = clk_get(&pdev->dev, "hdq_fck"); | 594 | hdq_data->hdq_fck = clk_get(&pdev->dev, "fck"); |
595 | 595 | ||
596 | if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { | 596 | if (IS_ERR(hdq_data->hdq_ick) || IS_ERR(hdq_data->hdq_fck)) { |
597 | dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); | 597 | dev_dbg(&pdev->dev, "Can't get HDQ clock objects\n"); |
diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c index 2f2ce7429f5..aa5ad6e33f0 100644 --- a/drivers/watchdog/omap_wdt.c +++ b/drivers/watchdog/omap_wdt.c | |||
@@ -60,9 +60,8 @@ struct omap_wdt_dev { | |||
60 | void __iomem *base; /* physical */ | 60 | void __iomem *base; /* physical */ |
61 | struct device *dev; | 61 | struct device *dev; |
62 | int omap_wdt_users; | 62 | int omap_wdt_users; |
63 | struct clk *armwdt_ck; | 63 | struct clk *ick; |
64 | struct clk *mpu_wdt_ick; | 64 | struct clk *fck; |
65 | struct clk *mpu_wdt_fck; | ||
66 | struct resource *mem; | 65 | struct resource *mem; |
67 | struct miscdevice omap_wdt_miscdev; | 66 | struct miscdevice omap_wdt_miscdev; |
68 | }; | 67 | }; |
@@ -146,13 +145,8 @@ static int omap_wdt_open(struct inode *inode, struct file *file) | |||
146 | if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) | 145 | if (test_and_set_bit(1, (unsigned long *)&(wdev->omap_wdt_users))) |
147 | return -EBUSY; | 146 | return -EBUSY; |
148 | 147 | ||
149 | if (cpu_is_omap16xx()) | 148 | clk_enable(wdev->ick); /* Enable the interface clock */ |
150 | clk_enable(wdev->armwdt_ck); /* Enable the clock */ | 149 | clk_enable(wdev->fck); /* Enable the functional clock */ |
151 | |||
152 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | ||
153 | clk_enable(wdev->mpu_wdt_ick); /* Enable the interface clock */ | ||
154 | clk_enable(wdev->mpu_wdt_fck); /* Enable the functional clock */ | ||
155 | } | ||
156 | 150 | ||
157 | /* initialize prescaler */ | 151 | /* initialize prescaler */ |
158 | while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) | 152 | while (__raw_readl(base + OMAP_WATCHDOG_WPS) & 0x01) |
@@ -181,13 +175,8 @@ static int omap_wdt_release(struct inode *inode, struct file *file) | |||
181 | 175 | ||
182 | omap_wdt_disable(wdev); | 176 | omap_wdt_disable(wdev); |
183 | 177 | ||
184 | if (cpu_is_omap16xx()) | 178 | clk_disable(wdev->ick); |
185 | clk_disable(wdev->armwdt_ck); /* Disable the clock */ | 179 | clk_disable(wdev->fck); |
186 | |||
187 | if (cpu_is_omap24xx() || cpu_is_omap34xx()) { | ||
188 | clk_disable(wdev->mpu_wdt_ick); /* Disable the clock */ | ||
189 | clk_disable(wdev->mpu_wdt_fck); /* Disable the clock */ | ||
190 | } | ||
191 | #else | 180 | #else |
192 | printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); | 181 | printk(KERN_CRIT "omap_wdt: Unexpected close, not stopping!\n"); |
193 | #endif | 182 | #endif |
@@ -303,44 +292,19 @@ static int __init omap_wdt_probe(struct platform_device *pdev) | |||
303 | wdev->omap_wdt_users = 0; | 292 | wdev->omap_wdt_users = 0; |
304 | wdev->mem = mem; | 293 | wdev->mem = mem; |
305 | 294 | ||
306 | if (cpu_is_omap16xx()) { | 295 | wdev->ick = clk_get(&pdev->dev, "ick"); |
307 | wdev->armwdt_ck = clk_get(&pdev->dev, "armwdt_ck"); | 296 | if (IS_ERR(wdev->ick)) { |
308 | if (IS_ERR(wdev->armwdt_ck)) { | 297 | ret = PTR_ERR(wdev->ick); |
309 | ret = PTR_ERR(wdev->armwdt_ck); | 298 | wdev->ick = NULL; |
310 | wdev->armwdt_ck = NULL; | 299 | goto err_clk; |
311 | goto err_clk; | ||
312 | } | ||
313 | } | 300 | } |
314 | 301 | wdev->fck = clk_get(&pdev->dev, "fck"); | |
315 | if (cpu_is_omap24xx()) { | 302 | if (IS_ERR(wdev->fck)) { |
316 | wdev->mpu_wdt_ick = clk_get(&pdev->dev, "mpu_wdt_ick"); | 303 | ret = PTR_ERR(wdev->fck); |
317 | if (IS_ERR(wdev->mpu_wdt_ick)) { | 304 | wdev->fck = NULL; |
318 | ret = PTR_ERR(wdev->mpu_wdt_ick); | 305 | goto err_clk; |
319 | wdev->mpu_wdt_ick = NULL; | ||
320 | goto err_clk; | ||
321 | } | ||
322 | wdev->mpu_wdt_fck = clk_get(&pdev->dev, "mpu_wdt_fck"); | ||
323 | if (IS_ERR(wdev->mpu_wdt_fck)) { | ||
324 | ret = PTR_ERR(wdev->mpu_wdt_fck); | ||
325 | wdev->mpu_wdt_fck = NULL; | ||
326 | goto err_clk; | ||
327 | } | ||
328 | } | 306 | } |
329 | 307 | ||
330 | if (cpu_is_omap34xx()) { | ||
331 | wdev->mpu_wdt_ick = clk_get(&pdev->dev, "wdt2_ick"); | ||
332 | if (IS_ERR(wdev->mpu_wdt_ick)) { | ||
333 | ret = PTR_ERR(wdev->mpu_wdt_ick); | ||
334 | wdev->mpu_wdt_ick = NULL; | ||
335 | goto err_clk; | ||
336 | } | ||
337 | wdev->mpu_wdt_fck = clk_get(&pdev->dev, "wdt2_fck"); | ||
338 | if (IS_ERR(wdev->mpu_wdt_fck)) { | ||
339 | ret = PTR_ERR(wdev->mpu_wdt_fck); | ||
340 | wdev->mpu_wdt_fck = NULL; | ||
341 | goto err_clk; | ||
342 | } | ||
343 | } | ||
344 | wdev->base = ioremap(res->start, res->end - res->start + 1); | 308 | wdev->base = ioremap(res->start, res->end - res->start + 1); |
345 | if (!wdev->base) { | 309 | if (!wdev->base) { |
346 | ret = -ENOMEM; | 310 | ret = -ENOMEM; |
@@ -380,12 +344,10 @@ err_ioremap: | |||
380 | wdev->base = NULL; | 344 | wdev->base = NULL; |
381 | 345 | ||
382 | err_clk: | 346 | err_clk: |
383 | if (wdev->armwdt_ck) | 347 | if (wdev->ick) |
384 | clk_put(wdev->armwdt_ck); | 348 | clk_put(wdev->ick); |
385 | if (wdev->mpu_wdt_ick) | 349 | if (wdev->fck) |
386 | clk_put(wdev->mpu_wdt_ick); | 350 | clk_put(wdev->fck); |
387 | if (wdev->mpu_wdt_fck) | ||
388 | clk_put(wdev->mpu_wdt_fck); | ||
389 | kfree(wdev); | 351 | kfree(wdev); |
390 | 352 | ||
391 | err_kzalloc: | 353 | err_kzalloc: |
@@ -417,20 +379,8 @@ static int omap_wdt_remove(struct platform_device *pdev) | |||
417 | release_mem_region(res->start, res->end - res->start + 1); | 379 | release_mem_region(res->start, res->end - res->start + 1); |
418 | platform_set_drvdata(pdev, NULL); | 380 | platform_set_drvdata(pdev, NULL); |
419 | 381 | ||
420 | if (wdev->armwdt_ck) { | 382 | clk_put(wdev->ick); |
421 | clk_put(wdev->armwdt_ck); | 383 | clk_put(wdev->fck); |
422 | wdev->armwdt_ck = NULL; | ||
423 | } | ||
424 | |||
425 | if (wdev->mpu_wdt_ick) { | ||
426 | clk_put(wdev->mpu_wdt_ick); | ||
427 | wdev->mpu_wdt_ick = NULL; | ||
428 | } | ||
429 | |||
430 | if (wdev->mpu_wdt_fck) { | ||
431 | clk_put(wdev->mpu_wdt_fck); | ||
432 | wdev->mpu_wdt_fck = NULL; | ||
433 | } | ||
434 | iounmap(wdev->base); | 384 | iounmap(wdev->base); |
435 | 385 | ||
436 | kfree(wdev); | 386 | kfree(wdev); |
diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c index 5bd782f2783..ee1caae4d33 100644 --- a/drivers/watchdog/sa1100_wdt.c +++ b/drivers/watchdog/sa1100_wdt.c | |||
@@ -30,7 +30,7 @@ | |||
30 | #include <linux/timex.h> | 30 | #include <linux/timex.h> |
31 | 31 | ||
32 | #ifdef CONFIG_ARCH_PXA | 32 | #ifdef CONFIG_ARCH_PXA |
33 | #include <mach/pxa-regs.h> | 33 | #include <mach/regs-ost.h> |
34 | #endif | 34 | #endif |
35 | 35 | ||
36 | #include <mach/reset.h> | 36 | #include <mach/reset.h> |