28 files changed, 184 insertions, 100 deletions

diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index cbd8f5f8059..76316a33061 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -2,14 +2,6 @@
 # USB device configuration
 #
 
-menuconfig USB_SUPPORT
-        bool "USB support"
-        depends on HAS_IOMEM
-        default y
-        ---help---
-          This option adds core support for Universal Serial Bus (USB).
-          You will also need drivers from the following menu to make use of it.
-
 # many non-PCI SOC chips embed OHCI
 config USB_ARCH_HAS_OHCI
         boolean
@@ -63,6 +55,14 @@ config USB_ARCH_HAS_XHCI
         boolean
         default PCI
 
+menuconfig USB_SUPPORT
+        bool "USB support"
+        depends on HAS_IOMEM
+        default y
+        ---help---
+          This option adds core support for Universal Serial Bus (USB).
+          You will also need drivers from the following menu to make use of it.
+
 if USB_SUPPORT
 
 config USB_COMMON
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f8e2d6d52e5..9a56635dc19 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1189,8 +1189,13 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
         if (status == 0) {
                 status = usb_suspend_device(udev, msg);
 
-                /* Again, ignore errors during system sleep transitions */
-                if (!PMSG_IS_AUTO(msg))
+                /*
+                 * Ignore errors from non-root-hub devices during
+                 * system sleep transitions.  For the most part,
+                 * these devices should go to low power anyway when
+                 * the entire bus is suspended.
+                 */
+                if (udev->parent && !PMSG_IS_AUTO(msg))
                         status = 0;
         }
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 9d7fc9a3993..140d3e11f21 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1978,6 +1978,18 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
         if (status == 0) {
                 usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
                 hcd->state = HC_STATE_SUSPENDED;
+
+                /* Did we race with a root-hub wakeup event? */
+                if (rhdev->do_remote_wakeup) {
+                        char    buffer[6];
+
+                        status = hcd->driver->hub_status_data(hcd, buffer);
+                        if (status != 0) {
+                                dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
+                                hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
+                                status = -EBUSY;
+                        }
+                }
         } else {
                 spin_lock_irq(&hcd_root_hub_lock);
                 if (!HCD_DEAD(hcd)) {
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 28664eb7f55..a2aa9d652c6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3163,6 +3163,22 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
         if (retval)
                 goto fail;
 
+        /*
+         * Some superspeed devices have finished the link training process
+         * and attached to a superspeed hub port, but the device descriptor
+         * got from those devices show they aren't superspeed devices. Warm
+         * reset the port attached by the devices can fix them.
+         */
+        if ((udev->speed == USB_SPEED_SUPER) &&
+                        (le16_to_cpu(udev->descriptor.bcdUSB) < 0x0300)) {
+                dev_err(&udev->dev, "got a wrong device descriptor, "
+                                "warm reset device\n");
+                hub_port_reset(hub, port1, udev,
+                                HUB_BH_RESET_TIME, true);
+                retval = -EINVAL;
+                goto fail;
+        }
+
         if (udev->descriptor.bMaxPacketSize0 == 0xff ||
                         udev->speed == USB_SPEED_SUPER)
                 i = 512;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index b3bdfede45e..aed3e07942d 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -308,7 +308,8 @@ static void sg_complete(struct urb *urb)
                                 retval = usb_unlink_urb(io->urbs [i]);
                                 if (retval != -EINPROGRESS &&
                                     retval != -ENODEV &&
-                                    retval != -EBUSY)
+                                    retval != -EBUSY &&
+                                    retval != -EIDRM)
                                         dev_err(&io->dev->dev,
                                                 "%s, unlink --> %d\n",
                                                 __func__, retval);
@@ -317,7 +318,6 @@ static void sg_complete(struct urb *urb)
                 }
                 spin_lock(&io->lock);
         }
-        urb->dev = NULL;
 
         /* on the last completion, signal usb_sg_wait() */
         io->bytes += urb->actual_length;
@@ -524,7 +524,6 @@ void usb_sg_wait(struct usb_sg_request *io)
                 case -ENXIO:    /* hc didn't queue this one */
                 case -EAGAIN:
                 case -ENOMEM:
-                        io->urbs[i]->dev = NULL;
                         retval = 0;
                         yield();
                         break;
@@ -542,7 +541,6 @@ void usb_sg_wait(struct usb_sg_request *io)
 
                         /* fail any uncompleted urbs */
                 default:
-                        io->urbs[i]->dev = NULL;
                         io->urbs[i]->status = retval;
                         dev_dbg(&io->dev->dev, "%s, submit --> %d\n",
                                 __func__, retval);
@@ -593,7 +591,10 @@ void usb_sg_cancel(struct usb_sg_request *io)
                         if (!io->urbs [i]->dev)
                                 continue;
                         retval = usb_unlink_urb(io->urbs [i]);
-                        if (retval != -EINPROGRESS && retval != -EBUSY)
+                        if (retval != -EINPROGRESS
+                                        && retval != -ENODEV
+                                        && retval != -EBUSY
+                                        && retval != -EIDRM)
                                 dev_warn(&io->dev->dev, "%s, unlink --> %d\n",
                                         __func__, retval);
                 }
diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index 7239a73c1b8..cd9b3a2cd8a 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -539,6 +539,10 @@ EXPORT_SYMBOL_GPL(usb_submit_urb);
  * never submitted, or it was unlinked before, or the hardware is already
  * finished with it), even if the completion handler has not yet run.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * Unlinking and Endpoint Queues:
  *
  * [The behaviors and guarantees described below do not apply to virtual
@@ -603,6 +607,10 @@ EXPORT_SYMBOL_GPL(usb_unlink_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
@@ -640,6 +648,10 @@ EXPORT_SYMBOL_GPL(usb_kill_urb);
  * with error -EPERM.  Thus even if the URB's completion handler always
  * tries to resubmit, it will not succeed and the URB will become idle.
  *
+ * The URB must not be deallocated while this routine is running.  In
+ * particular, when a driver calls this routine, it must insure that the
+ * completion handler cannot deallocate the URB.
+ *
  * This routine may not be used in an interrupt context (such as a bottom
  * half or a completion handler), or when holding a spinlock, or in other
  * situations where the caller can't schedule().
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 8793f32bab1..e58b1644297 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -1574,7 +1574,6 @@ static void destroy_ep_files (struct dev_data *dev)
         DBG (dev, "%s %d\n", __func__, dev->state);
 
         /* dev->state must prevent interference */
-restart:
         spin_lock_irq (&dev->lock);
         while (!list_empty(&dev->epfiles)) {
                 struct ep_data  *ep;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 057cdda7a48..806cc95317a 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -347,6 +347,8 @@ static int ehci_reset (struct ehci_hcd *ehci)
         if (ehci->debug)
                 dbgp_external_startup();
 
+        ehci->port_c_suspend = ehci->suspended_ports =
+                        ehci->resuming_ports = 0;
         return retval;
 }
 
@@ -939,6 +941,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                          * like usb_port_resume() does.
                          */
                         ehci->reset_done[i] = jiffies + msecs_to_jiffies(25);
+                        set_bit(i, &ehci->resuming_ports);
                         ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
                         mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
                 }
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 256fbd42e48..38fe0762315 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -223,15 +223,10 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
          * remote wakeup, we must fail the suspend.
          */
         if (hcd->self.root_hub->do_remote_wakeup) {
-                port = HCS_N_PORTS(ehci->hcs_params);
-                while (port--) {
-                        if (ehci->reset_done[port] != 0) {
-                                spin_unlock_irq(&ehci->lock);
-                                ehci_dbg(ehci, "suspend failed because "
-                                                "port %d is resuming\n",
-                                                port + 1);
-                                return -EBUSY;
-                        }
+                if (ehci->resuming_ports) {
+                        spin_unlock_irq(&ehci->lock);
+                        ehci_dbg(ehci, "suspend failed because a port is resuming\n");
+                        return -EBUSY;
                 }
         }
 
@@ -554,16 +549,12 @@ static int
 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
-        u32             temp, status = 0;
+        u32             temp, status;
         u32             mask;
         int             ports, i, retval = 1;
         unsigned long   flags;
         u32             ppcd = 0;
 
-        /* if !USB_SUSPEND, root hub timers won't get shut down ... */
-        if (ehci->rh_state != EHCI_RH_RUNNING)
-                return 0;
-
         /* init status to no-changes */
         buf [0] = 0;
         ports = HCS_N_PORTS (ehci->hcs_params);
@@ -572,6 +563,11 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 retval++;
         }
 
+        /* Inform the core about resumes-in-progress by returning
+         * a non-zero value even if there are no status changes.
+         */
+        status = ehci->resuming_ports;
+
         /* Some boards (mostly VIA?) report bogus overcurrent indications,
          * causing massive log spam unless we completely ignore them.  It
          * may be relevant that VIA VT8235 controllers, where PORT_POWER is
@@ -846,6 +842,7 @@ static int ehci_hub_control (
                                 ehci_writel(ehci,
                                         temp & ~(PORT_RWC_BITS | PORT_RESUME),
                                         status_reg);
+                                clear_bit(wIndex, &ehci->resuming_ports);
                                 retval = handshake(ehci, status_reg,
                                            PORT_RESUME, 0, 2000 /* 2msec */);
                                 if (retval != 0) {
@@ -864,6 +861,7 @@ static int ehci_hub_control (
                                         ehci->reset_done[wIndex])) {
                         status |= USB_PORT_STAT_C_RESET << 16;
                         ehci->reset_done [wIndex] = 0;
+                        clear_bit(wIndex, &ehci->resuming_ports);
 
                         /* force reset to complete */
                         ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
@@ -884,8 +882,10 @@ static int ehci_hub_control (
                                         ehci_readl(ehci, status_reg));
                 }
 
-                if (!(temp & (PORT_RESUME|PORT_RESET)))
+                if (!(temp & (PORT_RESUME|PORT_RESET))) {
                         ehci->reset_done[wIndex] = 0;
+                        clear_bit(wIndex, &ehci->resuming_ports);
+                }
 
                 /* transfer dedicated ports to the companion hc */
                 if ((temp & PORT_CONNECT) &&
@@ -920,6 +920,7 @@ static int ehci_hub_control (
                         status |= USB_PORT_STAT_SUSPEND;
                 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
                         clear_bit(wIndex, &ehci->suspended_ports);
+                        clear_bit(wIndex, &ehci->resuming_ports);
                         ehci->reset_done[wIndex] = 0;
                         if (temp & PORT_PE)
                                 set_bit(wIndex, &ehci->port_c_suspend);
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 3de48a2d795..73544bd440b 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -224,6 +224,7 @@ static int tegra_ehci_hub_control(
                 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
                 /* start resume signalling */
                 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
+                set_bit(wIndex-1, &ehci->resuming_ports);
 
                 spin_unlock_irqrestore(&ehci->lock, flags);
                 msleep(20);
@@ -236,6 +237,7 @@ static int tegra_ehci_hub_control(
                         pr_err("%s: timeout waiting for SUSPEND\n", __func__);
 
                 ehci->reset_done[wIndex-1] = 0;
+                clear_bit(wIndex-1, &ehci->resuming_ports);
 
                 tegra->port_resuming = 1;
                 goto done;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 8f9acbc96fd..2694ed6558d 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -117,6 +117,8 @@ struct ehci_hcd {			/* one per controller */
                         the change-suspend feature turned on */
         unsigned long           suspended_ports;        /* which ports are
                         suspended */
+        unsigned long           resuming_ports;         /* which ports have
+                        started to resume */
 
         /* per-HC memory pools (could be per-bus, but ...) */
         struct dma_pool         *qh_pool;       /* qh per active urb */
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 11de5f1be98..32dada8c8b4 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -825,9 +825,13 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
                 }
         }
 
-        /* Disable any BIOS SMIs */
-        writel(XHCI_LEGACY_DISABLE_SMI,
-                        base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+        val = readl(base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
+        /* Mask off (turn off) any enabled SMIs */
+        val &= XHCI_LEGACY_DISABLE_SMI;
+        /* Mask all SMI events bits, RW1C */
+        val |= XHCI_LEGACY_SMI_EVENTS;
+        /* Disable any BIOS SMIs and clear all SMI events*/
+        writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
         if (usb_is_intel_switchable_xhci(pdev))
                 usb_enable_xhci_ports(pdev);
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index 045cde4cbc3..768d54295a2 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -196,11 +196,12 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
         status = get_hub_status_data(uhci, buf);
 
         switch (uhci->rh_state) {
-            case UHCI_RH_SUSPENDING:
             case UHCI_RH_SUSPENDED:
                 /* if port change, ask to be resumed */
-                if (status || uhci->resuming_ports)
+                if (status || uhci->resuming_ports) {
+                        status = 1;
                         usb_hcd_resume_root_hub(hcd);
+                }
                 break;
 
             case UHCI_RH_AUTO_STOPPED:
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index e9b0f043455..4b436f5a417 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -119,7 +119,7 @@ static void xhci_print_command_reg(struct xhci_hcd *xhci)
         xhci_dbg(xhci, "  Event Interrupts %s\n",
                         (temp & CMD_EIE) ? "enabled " : "disabled");
         xhci_dbg(xhci, "  Host System Error Interrupts %s\n",
-                        (temp & CMD_EIE) ? "enabled " : "disabled");
+                        (temp & CMD_HSEIE) ? "enabled " : "disabled");
         xhci_dbg(xhci, "  HC has %sfinished light reset\n",
                         (temp & CMD_LRESET) ? "not " : "");
 }
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index c7f33123d4c..377f4242dab 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -62,8 +62,9 @@
 /* USB Legacy Support Control and Status Register  - section 7.1.2 */
 /* Add this offset, plus the value of xECP in HCCPARAMS to the base address */
 #define XHCI_LEGACY_CONTROL_OFFSET      (0x04)
-/* bits 1:2, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
-#define XHCI_LEGACY_DISABLE_SMI         ((0x3 << 1) + (0xff << 5) + (0x7 << 17))
+/* bits 1:3, 5:12, and 17:19 need to be preserved; bits 21:28 should be zero */
+#define XHCI_LEGACY_DISABLE_SMI         ((0x7 << 1) + (0xff << 5) + (0x7 << 17))
+#define XHCI_LEGACY_SMI_EVENTS          (0x7 << 29)
 
 /* USB 2.0 xHCI 0.96 L1C capability - section 7.2.2.1.3.2 */
 #define XHCI_L1C               (1 << 16)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index cae4c6f2845..68eaa908ac8 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1796,11 +1796,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         int i;
 
         /* Free the Event Ring Segment Table and the actual Event Ring */
-        if (xhci->ir_set) {
-                xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-                xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
-                xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
-        }
         size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
         if (xhci->erst.entries)
                 dma_free_coherent(&pdev->dev, size,
@@ -1812,7 +1807,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->event_ring = NULL;
         xhci_dbg(xhci, "Freed event ring\n");
 
-        xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
         if (xhci->cmd_ring)
                 xhci_ring_free(xhci, xhci->cmd_ring);
         xhci->cmd_ring = NULL;
@@ -1841,7 +1835,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
         xhci->medium_streams_pool = NULL;
         xhci_dbg(xhci, "Freed medium stream array pool\n");
 
-        xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
         if (xhci->dcbaa)
                 dma_free_coherent(&pdev->dev, sizeof(*xhci->dcbaa),
                                 xhci->dcbaa, xhci->dcbaa->dma);
@@ -2459,6 +2452,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 fail:
         xhci_warn(xhci, "Couldn't initialize memory\n");
+        xhci_halt(xhci);
+        xhci_reset(xhci);
         xhci_mem_cleanup(xhci);
         return -ENOMEM;
 }
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index ef98b38626f..7a856a767e7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -95,6 +95,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
                 xhci->quirks |= XHCI_RESET_ON_RESUME;
                 xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
         }
+        if (pdev->vendor == PCI_VENDOR_ID_VIA)
+                xhci->quirks |= XHCI_RESET_ON_RESUME;
 }
 
 /* called during probe() after chip reset completes */
@@ -326,7 +328,7 @@ int __init xhci_register_pci(void)
         return pci_register_driver(&xhci_pci_driver);
 }
 
-void __exit xhci_unregister_pci(void)
+void xhci_unregister_pci(void)
 {
         pci_unregister_driver(&xhci_pci_driver);
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bd9d53062e..3d9422f16a2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2417,7 +2417,7 @@ hw_died:
                 u32 irq_pending;
                 /* Acknowledge the PCI interrupt */
                 irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-                irq_pending |= 0x3;
+                irq_pending |= IMAN_IP;
                 xhci_writel(xhci, irq_pending, &xhci->ir_set->irq_pending);
         }
 
@@ -2734,7 +2734,7 @@ int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
                                 urb->dev->speed == USB_SPEED_FULL)
                         urb->interval /= 8;
         }
-        return xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+        return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /*
@@ -3514,7 +3514,7 @@ int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
         }
         ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
 
-        return xhci_queue_isoc_tx(xhci, GFP_ATOMIC, urb, slot_id, ep_index);
+        return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
 }
 
 /****           Command Ring Operations         ****/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index e1963d4a430..36641a7f237 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -106,6 +106,9 @@ int xhci_halt(struct xhci_hcd *xhci)
                         STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
         if (!ret)
                 xhci->xhc_state |= XHCI_STATE_HALTED;
+        else
+                xhci_warn(xhci, "Host not halted after %u microseconds.\n",
+                                XHCI_MAX_HALT_USEC);
         return ret;
 }
 
@@ -664,11 +667,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci)
         xhci->s3.dev_nt = xhci_readl(xhci, &xhci->op_regs->dev_notification);
         xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
         xhci->s3.config_reg = xhci_readl(xhci, &xhci->op_regs->config_reg);
-        xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
-        xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
         xhci->s3.erst_size = xhci_readl(xhci, &xhci->ir_set->erst_size);
         xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
         xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+        xhci->s3.irq_pending = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+        xhci->s3.irq_control = xhci_readl(xhci, &xhci->ir_set->irq_control);
 }
 
 static void xhci_restore_registers(struct xhci_hcd *xhci)
@@ -677,10 +680,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
         xhci_writel(xhci, xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
         xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
         xhci_writel(xhci, xhci->s3.config_reg, &xhci->op_regs->config_reg);
-        xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
-        xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
         xhci_writel(xhci, xhci->s3.erst_size, &xhci->ir_set->erst_size);
         xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+        xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+        xhci_writel(xhci, xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
+        xhci_writel(xhci, xhci->s3.irq_control, &xhci->ir_set->irq_control);
 }
 
 static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 91074fdab3e..3d69c4b2b54 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -205,6 +205,10 @@ struct xhci_op_regs {
 #define CMD_PM_INDEX    (1 << 11)
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
+/* IMAN - Interrupt Management Register */
+#define IMAN_IP         (1 << 1)
+#define IMAN_IE         (1 << 0)
+
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */
 #define STS_HALT        XHCI_STS_HALT
diff --git a/drivers/usb/serial/bus.c b/drivers/usb/serial/bus.c
index 7f547dc3a59..ed8adb052ca 100644
--- a/drivers/usb/serial/bus.c
+++ b/drivers/usb/serial/bus.c
@@ -60,8 +60,6 @@ static int usb_serial_device_probe(struct device *dev)
                 retval = -ENODEV;
                 goto exit;
         }
-        if (port->dev_state != PORT_REGISTERING)
-                goto exit;
 
         driver = port->serial->type;
         if (driver->port_probe) {
@@ -98,9 +96,6 @@ static int usb_serial_device_remove(struct device *dev)
         if (!port)
                 return -ENODEV;
 
-        if (port->dev_state != PORT_UNREGISTERING)
-                return retval;
-
         device_remove_file(&port->dev, &dev_attr_port_number);
 
         driver = port->serial->type;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ff8605b4b4b..02e7f2d32d5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,7 +75,8 @@ struct ftdi_private {
         unsigned long last_dtr_rts;     /* saved modem control outputs */
         struct async_icount     icount;
         wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-        char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+        char prev_status;        /* Used for TIOCMIWAIT */
+        bool dev_gone;        /* Used to abort TIOCMIWAIT */
         char transmit_empty;    /* If transmitter is empty or not */
         struct usb_serial_port *port;
         __u16 interface;        /* FT2232C, FT2232H or FT4232H port interface
@@ -1681,6 +1682,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
         init_waitqueue_head(&priv->delta_msr_wait);
 
         priv->flags = ASYNC_LOW_LATENCY;
+        priv->dev_gone = false;
 
         if (quirk && quirk->port_probe)
                 quirk->port_probe(priv);
@@ -1839,6 +1841,9 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 
         dbg("%s", __func__);
 
+        priv->dev_gone = true;
+        wake_up_interruptible_all(&priv->delta_msr_wait);
+
         remove_sysfs_attrs(port);
 
         kref_put(&priv->kref, ftdi_sio_priv_release);
@@ -1982,17 +1987,19 @@ static int ftdi_process_packet(struct tty_struct *tty,
            N.B. packet may be processed more than once, but differences
            are only processed once.  */
         status = packet[0] & FTDI_STATUS_B0_MASK;
-        if (status & FTDI_RS0_CTS)
-                priv->icount.cts++;
-        if (status & FTDI_RS0_DSR)
-                priv->icount.dsr++;
-        if (status & FTDI_RS0_RI)
-                priv->icount.rng++;
-        if (status & FTDI_RS0_RLSD)
-                priv->icount.dcd++;
         if (status != priv->prev_status) {
-                priv->diff_status |= status ^ priv->prev_status;
-                wake_up_interruptible(&priv->delta_msr_wait);
+                char diff_status = status ^ priv->prev_status;
+
+                if (diff_status & FTDI_RS0_CTS)
+                        priv->icount.cts++;
+                if (diff_status & FTDI_RS0_DSR)
+                        priv->icount.dsr++;
+                if (diff_status & FTDI_RS0_RI)
+                        priv->icount.rng++;
+                if (diff_status & FTDI_RS0_RLSD)
+                        priv->icount.dcd++;
+
+                wake_up_interruptible_all(&priv->delta_msr_wait);
                 priv->prev_status = status;
         }
 
@@ -2395,15 +2402,12 @@ static int ftdi_ioctl(struct tty_struct *tty,
          */
         case TIOCMIWAIT:
                 cprev = priv->icount;
-                while (1) {
+                while (!priv->dev_gone) {
                         interruptible_sleep_on(&priv->delta_msr_wait);
                         /* see if a signal did it */
                         if (signal_pending(current))
                                 return -ERESTARTSYS;
                         cnow = priv->icount;
-                        if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-                            cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-                                return -EIO; /* no change => error */
                         if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
                             ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
                             ((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
@@ -2412,7 +2416,7 @@ static int ftdi_ioctl(struct tty_struct *tty,
                         }
                         cprev = cnow;
                 }
-                /* not reached */
+                return -EIO;
                 break;
         case TIOCSERGETLSR:
                 return get_lsr_info(port, (struct serial_struct __user *)arg);
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6e1622f2a29..08d16e8c002 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -27,8 +27,8 @@
 
 /* Product information. */
 #define FOCUS_VENDOR_ID                 0x0C2E
-#define FOCUS_PRODUCT_ID                0x0720
-#define FOCUS_PRODUCT_ID_UNI            0x0710
+#define FOCUS_PRODUCT_ID_BI             0x0720
+#define FOCUS_PRODUCT_ID_UNI            0x0700
 
 #define METROUSB_SET_REQUEST_TYPE       0x40
 #define METROUSB_SET_MODEM_CTRL_REQUEST 10
@@ -47,7 +47,7 @@ struct metrousb_private {
 
 /* Device table list. */
 static struct usb_device_id id_table[] = {
-        { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
+        { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) },
         { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
         { }, /* Terminating entry. */
 };
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 836cfa9a515..f4465ccddc3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -708,6 +708,7 @@ static const struct usb_device_id option_ids[] = {
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+        { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
         { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index ff4a174fa5d..a1a9062954c 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -420,7 +420,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
         control = priv->line_control;
         if ((cflag & CBAUD) == B0)
                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
-        else
+        else if ((old_termios->c_cflag & CBAUD) == B0)
                 priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
         if (control != priv->line_control) {
                 control = priv->line_control;
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index f14465a83dd..fdd5aa2c8d8 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -289,6 +289,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x1199, 0x6856) }, /* Sierra Wireless AirCard 881 U */
         { USB_DEVICE(0x1199, 0x6859) }, /* Sierra Wireless AirCard 885 E */
         { USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
+        { USB_DEVICE(0x1199, 0x68A2) }, /* Sierra Wireless MC7710 */
         /* Sierra Wireless C885 */
         { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
         /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 69230f01056..97355a15bbe 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1059,6 +1059,12 @@ int usb_serial_probe(struct usb_interface *interface,
                 serial->attached = 1;
         }
 
+        /* Avoid race with tty_open and serial_install by setting the
+         * disconnected flag and not clearing it until all ports have been
+         * registered.
+         */
+        serial->disconnected = 1;
+
         if (get_free_serial(serial, num_ports, &minor) == NULL) {
                 dev_err(&interface->dev, "No more free serial devices\n");
                 goto probe_error;
@@ -1070,19 +1076,16 @@ int usb_serial_probe(struct usb_interface *interface,
                 port = serial->port[i];
                 dev_set_name(&port->dev, "ttyUSB%d", port->number);
                 dbg ("%s - registering %s", __func__, dev_name(&port->dev));
-                port->dev_state = PORT_REGISTERING;
                 device_enable_async_suspend(&port->dev);
 
                 retval = device_add(&port->dev);
-                if (retval) {
+                if (retval)
                         dev_err(&port->dev, "Error registering port device, "
                                 "continuing\n");
-                        port->dev_state = PORT_UNREGISTERED;
-                } else {
-                        port->dev_state = PORT_REGISTERED;
-                }
         }
 
+        serial->disconnected = 0;
+
         usb_serial_console_init(debug, minor);
 
 exit:
@@ -1124,22 +1127,8 @@ void usb_serial_disconnect(struct usb_interface *interface)
                         }
                         kill_traffic(port);
                         cancel_work_sync(&port->work);
-                        if (port->dev_state == PORT_REGISTERED) {
-
-                                /* Make sure the port is bound so that the
-                                 * driver's port_remove method is called.
-                                 */
-                                if (!port->dev.driver) {
-                                        int rc;
-
-                                        port->dev.driver =
-                                                        &serial->type->driver;
-                                        rc = device_bind_driver(&port->dev);
-                                }
-                                port->dev_state = PORT_UNREGISTERING;
+                        if (device_is_registered(&port->dev))
                                 device_del(&port->dev);
-                                port->dev_state = PORT_UNREGISTERED;
-                        }
                 }
         }
         serial->type->disconnect(serial);
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index c18538e4a6d..2653e73db62 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -132,6 +132,35 @@ static struct us_unusual_dev for_dynamic_ids =
 #undef COMPLIANT_DEV
 #undef USUAL_DEV
 
+#ifdef CONFIG_LOCKDEP
+
+static struct lock_class_key us_interface_key[USB_MAXINTERFACES];
+
+static void us_set_lock_class(struct mutex *mutex,
+                struct usb_interface *intf)
+{
+        struct usb_device *udev = interface_to_usbdev(intf);
+        struct usb_host_config *config = udev->actconfig;
+        int i;
+
+        for (i = 0; i < config->desc.bNumInterfaces; i++) {
+                if (config->interface[i] == intf)
+                        break;
+        }
+
+        BUG_ON(i == config->desc.bNumInterfaces);
+
+        lockdep_set_class(mutex, &us_interface_key[i]);
+}
+
+#else
+
+static void us_set_lock_class(struct mutex *mutex,
+                struct usb_interface *intf)
+{
+}
+
+#endif
 
 #ifdef CONFIG_PM        /* Minimal support for suspend and resume */
 
@@ -895,6 +924,7 @@ int usb_stor_probe1(struct us_data **pus,
         *pus = us = host_to_us(host);
         memset(us, 0, sizeof(struct us_data));
         mutex_init(&(us->dev_mutex));
+        us_set_lock_class(&us->dev_mutex, intf);
         init_completion(&us->cmnd_ready);
         init_completion(&(us->notify));
         init_waitqueue_head(&us->delay_wait);