6 files changed, 15 insertions, 15 deletions

diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 10800f16a23..ff32befd844 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -208,7 +208,7 @@ static void print_rx_state(struct net_device *dev)
  *      passing/getting the next value from the nic. As with all requests
  *      on this nic it has to be done in two stages, a) tell the nic which
  *      memory address you want to access and b) pass/get the value from the nic.
- *      With the EEProm, you have to wait before and inbetween access a) and b).
+ *      With the EEProm, you have to wait before and between access a) and b).
  *      As this is only read at initialization time and the wait period is very 
  *      small we shouldn't have to worry about scheduling issues.
  */
@@ -1251,7 +1251,7 @@ static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev)
 /* 
  * The NIC has told us that a packet has been downloaded onto the card, we must
  * find out which packet it has done, clear the skb and information for the packet
- * then advance around the ring for all tranmitted packets
+ * then advance around the ring for all transmitted packets
  */
 
 static void xl_dn_comp(struct net_device *dev) 
@@ -1568,7 +1568,7 @@ static void xl_arb_cmd(struct net_device *dev)
                         if (lan_status_diff & LSC_SOFT_ERR)
                                         printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
                         if (lan_status_diff & LSC_TRAN_BCN) 
-                                        printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+                                        printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
                         if (lan_status_diff & LSC_SS) 
                                         printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
                         if (lan_status_diff & LSC_RING_REC)
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 5bd14070453..9354ca9da57 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -1675,7 +1675,7 @@ drop_frame:
                         if (lan_status_diff & LSC_SOFT_ERR)
                                 printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n", dev->name);
                         if (lan_status_diff & LSC_TRAN_BCN)
-                                printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n", dev->name);
+                                printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n", dev->name);
                         if (lan_status_diff & LSC_SS)
                                 printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
                         if (lan_status_diff & LSC_RING_REC)
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 785ad1a2157..2bedc0ace81 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -73,7 +73,7 @@ static void madgemc_setint(struct net_device *dev, int val);
 static irqreturn_t madgemc_interrupt(int irq, void *dev_id);
 
 /*
- * These work around paging, however they don't guarentee you're on the
+ * These work around paging, however they don't guarantee you're on the
  * right page.
  */
 #define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
@@ -387,7 +387,7 @@ getout:
  * both with their own disadvantages...
  *
  * 1)   Read in the SIFSTS register from the TMS controller.  This
- *      is guarenteed to be accurate, however, there's a fairly
+ *      is guaranteed to be accurate, however, there's a fairly
  *      large performance penalty for doing so: the Madge chips
  *      must request the register from the Eagle, the Eagle must
  *      read them from its internal bus, and then take the route
@@ -454,7 +454,7 @@ static irqreturn_t madgemc_interrupt(int irq, void *dev_id)
 }
 
 /*
- * Set the card to the prefered ring speed.
+ * Set the card to the preferred ring speed.
  *
  * Unlike newer cards, the MC16/32 have their speed selection
  * circuit connected to the Madge ASICs and not to the TMS380
diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c
index 3d2fbe60b46..2684003b8ab 100644
--- a/drivers/net/tokenring/olympic.c
+++ b/drivers/net/tokenring/olympic.c
@@ -1500,7 +1500,7 @@ drop_frame:
                         if (lan_status_diff & LSC_SOFT_ERR)
                                         printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name);
                         if (lan_status_diff & LSC_TRAN_BCN) 
-                                        printk(KERN_INFO "%s: We are tranmitting the beacon, aaah\n",dev->name);
+                                        printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name);
                         if (lan_status_diff & LSC_SS) 
                                         printk(KERN_INFO "%s: Single Station on the ring\n", dev->name);
                         if (lan_status_diff & LSC_RING_REC)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 63db5a6762a..d9044aba7af 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -393,7 +393,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
         tp->rx_bdb_end[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0);
 
         /* Allocate MAC transmit buffers.
-         * MAC Tx Buffers doen't have to be on an ODD Boundry.
+         * MAC Tx Buffers doen't have to be on an ODD Boundary.
          */
         tp->tx_buff_head[MAC_QUEUE]
                 = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[MAC_QUEUE]);
@@ -415,7 +415,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * ?? For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry and then restore malloc to Even Boundrys.
+         * ODD Boundary and then restore malloc to Even Boundrys.
          */
         smctr_malloc(dev, 1L);
         tp->tx_buff_head[NON_MAC_QUEUE]
@@ -1311,7 +1311,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
         mem_used += sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE];
 
         /* Allocate MAC transmit buffers.
-         * MAC transmit buffers don't have to be on an ODD Boundry.
+         * MAC transmit buffers don't have to be on an ODD Boundary.
          */
         mem_used += tp->tx_buff_size[MAC_QUEUE];
 
@@ -1325,7 +1325,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry,and then restore malloc to Even Boundrys.
+         * ODD Boundary,and then restore malloc to Even Boundrys.
          */
         mem_used += 1L;
         mem_used += tp->tx_buff_size[NON_MAC_QUEUE];
@@ -3069,8 +3069,8 @@ static int smctr_load_node_addr(struct net_device *dev)
  * disabled.!?
  *
  * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
  * run, and then the receive mask set back to its original value if the test
  * is successful.
  */
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 60b30ee38dc..e5a617c586c 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -442,7 +442,7 @@ typedef struct {
 #define PASS_FIRST_BUF_ONLY     0x0100  /* Passes only first internal buffer
                                          * of each received frame; FrameSize
                                          * of RPLs must contain internal
-                                         * BUFFER_SIZE bits for promiscous mode.
+                                         * BUFFER_SIZE bits for promiscuous mode.
                                          */
 #define ENABLE_FULL_DUPLEX_SELECTION    0x2000 
                                         /* Enable the use of full-duplex