1 files changed, 33 insertions, 26 deletions

diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 52777902bbc..5c1cc7ad9a1 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -1163,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev)
                                 p1pll->pll_out_min = 64800;
                         else
                                 p1pll->pll_out_min = 20000;
-                } else if (p1pll->pll_out_min > 64800) {
-                        /* Limiting the pll output range is a good thing generally as
-                         * it limits the number of possible pll combinations for a given
-                         * frequency presumably to the ones that work best on each card.
-                         * However, certain duallink DVI monitors seem to like
-                         * pll combinations that would be limited by this at least on
-                         * pre-DCE 3.0 r6xx hardware.  This might need to be adjusted per
-                         * family.
-                         */
-                        p1pll->pll_out_min = 64800;
                 }
 
                 p1pll->pll_in_min =
@@ -1987,6 +1977,9 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev)
         num_modes = power_info->info.ucNumOfPowerModeEntries;
         if (num_modes > ATOM_MAX_NUMBEROF_POWER_BLOCK)
                 num_modes = ATOM_MAX_NUMBEROF_POWER_BLOCK;
+        rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * num_modes, GFP_KERNEL);
+        if (!rdev->pm.power_state)
+                return state_index;
         /* last mode is usually default, array is low to high */
         for (i = 0; i < num_modes; i++) {
                 rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
@@ -2338,6 +2331,10 @@ static int radeon_atombios_parse_power_table_4_5(struct radeon_device *rdev)
         power_info = (union power_info *)(mode_info->atom_context->bios + data_offset);
 
         radeon_atombios_add_pplib_thermal_controller(rdev, &power_info->pplib.sThermalController);
+        rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) *
+                                       power_info->pplib.ucNumStates, GFP_KERNEL);
+        if (!rdev->pm.power_state)
+                return state_index;
         /* first mode is usually default, followed by low to high */
         for (i = 0; i < power_info->pplib.ucNumStates; i++) {
                 mode_index = 0;
@@ -2418,6 +2415,10 @@ static int radeon_atombios_parse_power_table_6(struct radeon_device *rdev)
         non_clock_info_array = (struct NonClockInfoArray *)
                 (mode_info->atom_context->bios + data_offset +
                  power_info->pplib.usNonClockInfoArrayOffset);
+        rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) *
+                                       state_array->ucNumEntries, GFP_KERNEL);
+        if (!rdev->pm.power_state)
+                return state_index;
         for (i = 0; i < state_array->ucNumEntries; i++) {
                 mode_index = 0;
                 power_state = (union pplib_power_state *)&state_array->states[i];
@@ -2491,19 +2492,22 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev)
                         break;
                 }
         } else {
-                /* add the default mode */
-                rdev->pm.power_state[state_index].type =
-                        POWER_STATE_TYPE_DEFAULT;
-                rdev->pm.power_state[state_index].num_clock_modes = 1;
-                rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
-                rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
-                rdev->pm.power_state[state_index].default_clock_mode =
-                        &rdev->pm.power_state[state_index].clock_info[0];
-                rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
-                rdev->pm.power_state[state_index].pcie_lanes = 16;
-                rdev->pm.default_power_state_index = state_index;
-                rdev->pm.power_state[state_index].flags = 0;
-                state_index++;
+                rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL);
+                if (rdev->pm.power_state) {
+                        /* add the default mode */
+                        rdev->pm.power_state[state_index].type =
+                                POWER_STATE_TYPE_DEFAULT;
+                        rdev->pm.power_state[state_index].num_clock_modes = 1;
+                        rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk;
+                        rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk;
+                        rdev->pm.power_state[state_index].default_clock_mode =
+                                &rdev->pm.power_state[state_index].clock_info[0];
+                        rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE;
+                        rdev->pm.power_state[state_index].pcie_lanes = 16;
+                        rdev->pm.default_power_state_index = state_index;
+                        rdev->pm.power_state[state_index].flags = 0;
+                        state_index++;
+                }
         }
 
         rdev->pm.num_power_states = state_index;
@@ -2619,7 +2623,7 @@ void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev)
         bios_2_scratch &= ~ATOM_S2_VRI_BRIGHT_ENABLE;
 
         /* tell the bios not to handle mode switching */
-        bios_6_scratch |= (ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH | ATOM_S6_ACC_MODE);
+        bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
 
         if (rdev->family >= CHIP_R600) {
                 WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
@@ -2670,10 +2674,13 @@ void radeon_atom_output_lock(struct drm_encoder *encoder, bool lock)
         else
                 bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH);
 
-        if (lock)
+        if (lock) {
                 bios_6_scratch |= ATOM_S6_CRITICAL_STATE;
-        else
+                bios_6_scratch &= ~ATOM_S6_ACC_MODE;
+        } else {
                 bios_6_scratch &= ~ATOM_S6_CRITICAL_STATE;
+                bios_6_scratch |= ATOM_S6_ACC_MODE;
+        }
 
         if (rdev->family >= CHIP_R600)
                 WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);