1 files changed, 29 insertions, 59 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 30fe554d893..6348c499616 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -92,6 +92,11 @@ struct intel_sdvo {
         */
         uint16_t attached_output;
 
+        /*
+         * Hotplug activation bits for this device
+         */
+        uint8_t hotplug_active[2];
+
         /**
          * This is used to select the color range of RBG outputs in HDMI mode.
          * It is only valid when using TMDS encoding and 8 bit per color mode.
@@ -1208,74 +1213,20 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
         return true;
 }
 
-/* No use! */
-#if 0
-struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
-        struct drm_connector *connector = NULL;
-        struct intel_sdvo *iout = NULL;
-        struct intel_sdvo *sdvo;
-
-        /* find the sdvo connector */
-        list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-                iout = to_intel_sdvo(connector);
-
-                if (iout->type != INTEL_OUTPUT_SDVO)
-                        continue;
-
-                sdvo = iout->dev_priv;
-
-                if (sdvo->sdvo_reg == SDVOB && sdvoB)
-                        return connector;
-
-                if (sdvo->sdvo_reg == SDVOC && !sdvoB)
-                        return connector;
-
-        }
-
-        return NULL;
-}
-
-int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
 {
         u8 response[2];
-        u8 status;
-        struct intel_sdvo *intel_sdvo;
-        DRM_DEBUG_KMS("\n");
-
-        if (!connector)
-                return 0;
-
-        intel_sdvo = to_intel_sdvo(connector);
 
         return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
                                     &response, 2) && response[0];
 }
 
-void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
 {
-        u8 response[2];
-        u8 status;
-        struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
-
-        intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-        intel_sdvo_read_response(intel_sdvo, &response, 2);
-
-        if (on) {
-                intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
-                status = intel_sdvo_read_response(intel_sdvo, &response, 2);
-
-                intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-        } else {
-                response[0] = 0;
-                response[1] = 0;
-                intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-        }
+        struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
 
-        intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-        intel_sdvo_read_response(intel_sdvo, &response, 2);
+        intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
 }
-#endif
 
 static bool
 intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
@@ -2045,6 +1996,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 {
         struct drm_encoder *encoder = &intel_sdvo->base.base;
         struct drm_connector *connector;
+        struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
         struct intel_connector *intel_connector;
         struct intel_sdvo_connector *intel_sdvo_connector;
 
@@ -2062,7 +2014,17 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 
         intel_connector = &intel_sdvo_connector->base;
         connector = &intel_connector->base;
-        connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+        if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+                connector->polled = DRM_CONNECTOR_POLL_HPD;
+                intel_sdvo->hotplug_active[0] |= 1 << device;
+                /* Some SDVO devices have one-shot hotplug interrupts.
+                 * Ensure that they get re-enabled when an interrupt happens.
+                 */
+                intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+                intel_sdvo_enable_hotplug(intel_encoder);
+        }
+        else
+                connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
         encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
         connector->connector_type = DRM_MODE_CONNECTOR_DVID;
 
@@ -2569,6 +2531,14 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
         if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
                 goto err;
 
+        /* Set up hotplug command - note paranoia about contents of reply.
+         * We assume that the hardware is in a sane state, and only touch
+         * the bits we think we understand.
+         */
+        intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+                             &intel_sdvo->hotplug_active, 2);
+        intel_sdvo->hotplug_active[0] &= ~0x3;
+
         if (intel_sdvo_output_setup(intel_sdvo,
                                     intel_sdvo->caps.output_flags) != true) {
                 DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",