1 files changed, 138 insertions, 0 deletions

diff --git a/arch/m68k/include/asm/m54xxpci.h b/arch/m68k/include/asm/m54xxpci.h
new file mode 100644
index 00000000000..6fbf54f72f2
--- /dev/null
+++ b/arch/m68k/include/asm/m54xxpci.h
@@ -0,0 +1,138 @@
+/****************************************************************************/
+
+/*
+ *      m54xxpci.h -- ColdFire 547x and 548x PCI bus support
+ *
+ *      (C) Copyright 2011,  Greg Ungerer <gerg@uclinux.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+/****************************************************************************/
+#ifndef M54XXPCI_H
+#define M54XXPCI_H
+/****************************************************************************/
+
+/*
+ *      The core set of PCI support registers are mapped into the MBAR region.
+ */
+#define PCIIDR          (CONFIG_MBAR + 0xb00)   /* PCI device/vendor ID */
+#define PCISCR          (CONFIG_MBAR + 0xb04)   /* PCI status/command */
+#define PCICCRIR        (CONFIG_MBAR + 0xb08)   /* PCI class/revision */
+#define PCICR1          (CONFIG_MBAR + 0xb0c)   /* PCI configuration 1 */
+#define PCIBAR0         (CONFIG_MBAR + 0xb10)   /* PCI base address 0 */
+#define PCIBAR1         (CONFIG_MBAR + 0xb14)   /* PCI base address 1 */
+#define PCICCPR         (CONFIG_MBAR + 0xb28)   /* PCI cardbus CIS pointer */
+#define PCISID          (CONFIG_MBAR + 0xb2c)   /* PCI subsystem IDs */
+#define PCIERBAR        (CONFIG_MBAR + 0xb30)   /* PCI expansion ROM */
+#define PCICPR          (CONFIG_MBAR + 0xb34)   /* PCI capabilities pointer */
+#define PCICR2          (CONFIG_MBAR + 0xb3c)   /* PCI configuration 2 */
+
+#define PCIGSCR         (CONFIG_MBAR + 0xb60)   /* Global status/control */
+#define PCITBATR0       (CONFIG_MBAR + 0xb64)   /* Target base translation 0 */
+#define PCITBATR1       (CONFIG_MBAR + 0xb68)   /* Target base translation 1 */
+#define PCITCR          (CONFIG_MBAR + 0xb6c)   /* Target control */
+#define PCIIW0BTAR      (CONFIG_MBAR + 0xb70)   /* Initiator window 0 */
+#define PCIIW1BTAR      (CONFIG_MBAR + 0xb74)   /* Initiator window 1 */
+#define PCIIW2BTAR      (CONFIG_MBAR + 0xb78)   /* Initiator window 2 */
+#define PCIIWCR         (CONFIG_MBAR + 0xb80)   /* Initiator window config */
+#define PCIICR          (CONFIG_MBAR + 0xb84)   /* Initiator control */
+#define PCIISR          (CONFIG_MBAR + 0xb88)   /* Initiator status */
+#define PCICAR          (CONFIG_MBAR + 0xbf8)   /* Configuration address */
+
+#define PCITPSR         (CONFIG_MBAR + 0x8400)  /* TX packet size */
+#define PCITSAR         (CONFIG_MBAR + 0x8404)  /* TX start address */
+#define PCITTCR         (CONFIG_MBAR + 0x8408)  /* TX transaction control */
+#define PCITER          (CONFIG_MBAR + 0x840c)  /* TX enables */
+#define PCITNAR         (CONFIG_MBAR + 0x8410)  /* TX next address */
+#define PCITLWR         (CONFIG_MBAR + 0x8414)  /* TX last word */
+#define PCITDCR         (CONFIG_MBAR + 0x8418)  /* TX done counts */
+#define PCITSR          (CONFIG_MBAR + 0x841c)  /* TX status */
+#define PCITFDR         (CONFIG_MBAR + 0x8440)  /* TX FIFO data */
+#define PCITFSR         (CONFIG_MBAR + 0x8444)  /* TX FIFO status */
+#define PCITFCR         (CONFIG_MBAR + 0x8448)  /* TX FIFO control */
+#define PCITFAR         (CONFIG_MBAR + 0x844c)  /* TX FIFO alarm */
+#define PCITFRPR        (CONFIG_MBAR + 0x8450)  /* TX FIFO read pointer */
+#define PCITFWPR        (CONFIG_MBAR + 0x8454)  /* TX FIFO write pointer */
+
+#define PCIRPSR         (CONFIG_MBAR + 0x8480)  /* RX packet size */
+#define PCIRSAR         (CONFIG_MBAR + 0x8484)  /* RX start address */
+#define PCIRTCR         (CONFIG_MBAR + 0x8488)  /* RX transaction control */
+#define PCIRER          (CONFIG_MBAR + 0x848c)  /* RX enables */
+#define PCIRNAR         (CONFIG_MBAR + 0x8490)  /* RX next address */
+#define PCIRDCR         (CONFIG_MBAR + 0x8498)  /* RX done counts */
+#define PCIRSR          (CONFIG_MBAR + 0x849c)  /* RX status */
+#define PCIRFDR         (CONFIG_MBAR + 0x84c0)  /* RX FIFO data */
+#define PCIRFSR         (CONFIG_MBAR + 0x84c4)  /* RX FIFO status */
+#define PCIRFCR         (CONFIG_MBAR + 0x84c8)  /* RX FIFO control */
+#define PCIRFAR         (CONFIG_MBAR + 0x84cc)  /* RX FIFO alarm */
+#define PCIRFRPR        (CONFIG_MBAR + 0x84d0)  /* RX FIFO read pointer */
+#define PCIRFWPR        (CONFIG_MBAR + 0x84d4)  /* RX FIFO write pointer */
+
+#define PACR            (CONFIG_MBAR + 0xc00)   /* PCI arbiter control */
+#define PASR            (COFNIG_MBAR + 0xc04)   /* PCI arbiter status */
+
+/*
+ *      Definitions for the Global status and control register.
+ */
+#define PCIGSCR_PE      0x20000000              /* Parity error detected */
+#define PCIGSCR_SE      0x10000000              /* System error detected */
+#define PCIGSCR_XCLKBIN 0x07000000              /* XLB2CLKIN mask */
+#define PCIGSCR_PEE     0x00002000              /* Parity error intr enable */
+#define PCIGSCR_SEE     0x00001000              /* System error intr enable */
+#define PCIGSCR_RESET   0x00000001              /* Reset bit */
+
+/*
+ *      Bit definitions for the PCICAR configuration address register.
+ */
+#define PCICAR_E        0x80000000              /* Enable config space */
+#define PCICAR_BUSN     16                      /* Move bus bits */
+#define PCICAR_DEVFNN   8                       /* Move devfn bits */
+#define PCICAR_DWORDN   0                       /* Move dword bits */
+
+/*
+ *      The initiator windows hold the memory and IO mapping information.
+ *      This macro creates the register values from the desired addresses.
+ */
+#define WXBTAR(hostaddr, pciaddr, size) \
+                        (((hostaddr) & 0xff000000) | \
+                        ((((size) - 1) & 0xff000000) >> 8) | \
+                        (((pciaddr) & 0xff000000) >> 16))
+
+#define PCIIWCR_W0_MEM  0x00000000              /* Window 0 is memory */
+#define PCIIWCR_W0_IO   0x08000000              /* Window 0 is IO */
+#define PCIIWCR_W0_MRD  0x00000000              /* Window 0 memory read */
+#define PCIIWCR_W0_MRDL 0x02000000              /* Window 0 memory read line */
+#define PCIIWCR_W0_MRDM 0x04000000              /* Window 0 memory read mult */
+#define PCIIWCR_W0_E    0x01000000              /* Window 0 enable */
+
+#define PCIIWCR_W1_MEM  0x00000000              /* Window 0 is memory */
+#define PCIIWCR_W1_IO   0x00080000              /* Window 0 is IO */
+#define PCIIWCR_W1_MRD  0x00000000              /* Window 0 memory read */
+#define PCIIWCR_W1_MRDL 0x00020000              /* Window 0 memory read line */
+#define PCIIWCR_W1_MRDM 0x00040000              /* Window 0 memory read mult */
+#define PCIIWCR_W1_E    0x00010000              /* Window 0 enable */
+
+/*
+ *      Bit definitions for the PCIBATR registers.
+ */
+#define PCITBATR0_E     0x00000001              /* Enable window 0 */
+#define PCITBATR1_E     0x00000001              /* Enable window 1 */
+
+/*
+ *      PCI arbiter support definitions and macros.
+ */
+#define PACR_INTMPRI    0x00000001
+#define PACR_EXTMPRI(x) (((x) & 0x1f) << 1)
+#define PACR_INTMINTE   0x00010000
+#define PACR_EXTMINTE(x) (((x) & 0x1f) << 17)
+#define PACR_PKMD       0x40000000
+#define PACR_DS         0x80000000
+
+#define PCICR1_CL(x)    ((x) & 0xf)             /* Cacheline size field */
+#define PCICR1_LT(x)    (((x) & 0xff) << 8)     /* Latency timer field */
+
+/****************************************************************************/
+#endif  /* M54XXPCI_H */