149 files changed, 265 insertions, 217 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b9f78b570e..377a7a595b0 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -694,7 +694,7 @@ config ARCH_S3C2410
           the Samsung SMDK2410 development board (and derivatives).
 
           Note, the S3C2416 and the S3C2450 are so close that they even share
-          the same SoC ID code. This means that there is no seperate machine
+          the same SoC ID code. This means that there is no separate machine
           directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
 
 config ARCH_S3C64XX
@@ -1540,7 +1540,6 @@ config HIGHMEM
 config HIGHPTE
         bool "Allocate 2nd-level pagetables from highmem"
         depends on HIGHMEM
-        depends on !OUTER_CACHE
 
 config HW_PERF_EVENTS
         bool "Enable hardware performance counter support for perf events"
@@ -2012,6 +2011,8 @@ source "kernel/power/Kconfig"
 
 config ARCH_SUSPEND_POSSIBLE
         depends on !ARCH_S5P64X0 && !ARCH_S5P6442
+        depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
+                CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
         def_bool y
 
 endmenu
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index 901e6dff843..2cef8e13f9f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -34,7 +34,7 @@ config PROCESSOR_ID
           used instead of the auto-probing which utilizes the register.
 
 config REMAP_VECTORS_TO_RAM
-        bool 'Install vectors to the begining of RAM' if DRAM_BASE
+        bool 'Install vectors to the beginning of RAM' if DRAM_BASE
         depends on DRAM_BASE
         help
           The kernel needs to change the hardware exception vectors.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 494224a9b45..03d01d783e3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -63,17 +63,6 @@ config DEBUG_USER
               8 - SIGSEGV faults
              16 - SIGBUS faults
 
-config DEBUG_ERRORS
-        bool "Verbose kernel error messages"
-        depends on DEBUG_KERNEL
-        help
-          This option controls verbose debugging information which can be
-          printed when the kernel detects an internal error. This debugging
-          information is useful to kernel hackers when tracking down problems,
-          but mostly meaningless to other people. It's safe to say Y unless
-          you are concerned with the code size or don't want to see these
-          messages.
-
 config DEBUG_STACK_USAGE
         bool "Enable stack utilization instrumentation"
         depends on DEBUG_KERNEL
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e7521bca2c3..6ea9b6f3607 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -16,5 +16,4 @@ obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
 obj-$(CONFIG_ARCH_IXP2000)      += uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)      += uengine.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
-obj-$(CONFIG_COMMON_CLKDEV)     += clkdev.o
 obj-$(CONFIG_ARM_TIMER_SP804)   += timer-sp.o
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index 8f0f86db360..97912fa4878 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1045,7 +1045,7 @@ static inline int _loop(unsigned dry_run, u8 buf[],
         unsigned lcnt0, lcnt1, ljmp0, ljmp1;
         struct _arg_LPEND lpend;
 
-        /* Max iterations possibile in DMALP is 256 */
+        /* Max iterations possible in DMALP is 256 */
         if (*bursts >= 256*256) {
                 lcnt1 = 256;
                 lcnt0 = 256;
@@ -1446,7 +1446,7 @@ int pl330_update(const struct pl330_info *pi)
         }
 
         for (ev = 0; ev < pi->pcfg.num_events; ev++) {
-                if (val & (1 << ev)) { /* Event occured */
+                if (val & (1 << ev)) { /* Event occurred */
                         struct pl330_thread *thrd;
                         u32 inten = readl(regs + INTEN);
                         int active;
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index ed5bc9e05a4..cd4458f6417 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -2,6 +2,7 @@
 #define __ASM_ARM_CPUTYPE_H
 
 #include <linux/stringify.h>
+#include <linux/kernel.h>
 
 #define CPUID_ID        0
 #define CPUID_CACHETYPE 1
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
index ee5e03efc1b..3ad4c10d0d8 100644
--- a/arch/arm/include/asm/fpstate.h
+++ b/arch/arm/include/asm/fpstate.h
@@ -18,7 +18,7 @@
  * VFP storage area has:
  *  - FPEXC, FPSCR, FPINST and FPINST2.
  *  - 16 or 32 double precision data registers
- *  - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
+ *  - an implementation-dependent word of state for FLDMX/FSTMX (pre-ARMv6)
  * 
  *  FPEXC will always be non-zero once the VFP has been used in this process.
  */
diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h
index c7afbc552c7..7e30874377e 100644
--- a/arch/arm/include/asm/glue-cache.h
+++ b/arch/arm/include/asm/glue-cache.h
@@ -126,7 +126,7 @@
 #endif
 
 #if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
+#error Unknown cache maintenance model
 #endif
 
 #ifndef MULTI_CACHE
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index 0ec35d1698a..fbf71d75ec8 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -10,8 +10,8 @@
  *
  *  This file provides the glue to stick the processor-specific bits
  *  into the kernel in an efficient manner.  The idea is to use branches
- *  when we're only targetting one class of TLB, or indirect calls
- *  when we're targetting multiple classes of TLBs.
+ *  when we're only targeting one class of TLB, or indirect calls
+ *  when we're targeting multiple classes of TLBs.
  */
 #ifdef __KERNEL__
 
diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h
index f35b86e68dd..e4a04e4e562 100644
--- a/arch/arm/include/asm/hardware/pl080.h
+++ b/arch/arm/include/asm/hardware/pl080.h
@@ -16,7 +16,7 @@
  * make it not entierly compatible with the PL080 specification from
  * ARM. When in doubt, check the Samsung documentation first.
  *
- * The Samsung defines are PL080S, and add an extra controll register,
+ * The Samsung defines are PL080S, and add an extra control register,
  * the ability to move more than 2^11 counts of data and some extra
  * OneNAND features.
 */
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 9a87823642d..885be097769 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -249,7 +249,7 @@ do {									\
  * cache totally.  This means that the cache becomes inconsistent, and,
  * since we use normal loads/stores as well, this is really bad.
  * Typically, this causes oopsen in filp_close, but could have other,
- * more disasterous effects.  There are two work-arounds:
+ * more disastrous effects.  There are two work-arounds:
  *  1. Disable interrupts and emulate the atomic swap
  *  2. Clean the cache, perform atomic swap, flush the cache
  *
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index c4391ba2035..1dc98067589 100644
--- a/arch/arm/include/asm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -43,6 +43,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread)
 #define THREAD_NOTIFY_FLUSH     0
 #define THREAD_NOTIFY_EXIT      1
 #define THREAD_NOTIFY_SWITCH    2
+#define THREAD_NOTIFY_COPY      3
 
 #endif
 #endif
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
index 47f023aa849..14749aec94b 100644
--- a/arch/arm/include/asm/ucontext.h
+++ b/arch/arm/include/asm/ucontext.h
@@ -47,7 +47,7 @@ struct crunch_sigframe {
 #endif
 
 #ifdef CONFIG_IWMMXT
-/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
+/* iwmmxt_area is 0x98 bytes long, preceded by 8 bytes of signature */
 #define IWMMXT_MAGIC            0x12ef842a
 #define IWMMXT_STORAGE_SIZE     (IWMMXT_SIZE + 8)
 
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index c891eb76c0e..87dbe3e2197 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -396,6 +396,10 @@
 #define __NR_fanotify_init              (__NR_SYSCALL_BASE+367)
 #define __NR_fanotify_mark              (__NR_SYSCALL_BASE+368)
 #define __NR_prlimit64                  (__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at          (__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at          (__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime              (__NR_SYSCALL_BASE+372)
+#define __NR_syncfs                     (__NR_SYSCALL_BASE+373)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 74554f1742d..8d95446150a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)            += arthur.o
 obj-$(CONFIG_ISA_DMA)           += dma-isa.o
 obj-$(CONFIG_PCI)               += bios32.o isa.o
-obj-$(CONFIG_PM)                += sleep.o
+obj-$(CONFIG_PM_SLEEP)          += sleep.o
 obj-$(CONFIG_HAVE_SCHED_CLOCK)  += sched_clock.o
 obj-$(CONFIG_SMP)               += smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)      += smp_scu.o
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 5c26eccef99..7fbf28c35bb 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -379,6 +379,10 @@
                 CALL(sys_fanotify_init)
                 CALL(sys_fanotify_mark)
                 CALL(sys_prlimit64)
+/* 370 */       CALL(sys_name_to_handle_at)
+                CALL(sys_open_by_handle_at)
+                CALL(sys_clock_adjtime)
+                CALL(sys_syncfs)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index d4a0da1e48f..9b05c6a0dce 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -40,15 +40,22 @@ EXPORT_SYMBOL(elf_check_arch);
 void elf_set_personality(const struct elf32_hdr *x)
 {
         unsigned int eflags = x->e_flags;
-        unsigned int personality = PER_LINUX_32BIT;
+        unsigned int personality = current->personality & ~PER_MASK;
+
+        /*
+         * We only support Linux ELF executables, so always set the
+         * personality to LINUX.
+         */
+        personality |= PER_LINUX;
 
         /*
          * APCS-26 is only valid for OABI executables
          */
-        if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN) {
-                if (eflags & EF_ARM_APCS_26)
-                        personality = PER_LINUX;
-        }
+        if ((eflags & EF_ARM_EABI_MASK) == EF_ARM_EABI_UNKNOWN &&
+            (eflags & EF_ARM_APCS_26))
+                personality &= ~ADDR_LIMIT_32BIT;
+        else
+                personality |= ADDR_LIMIT_32BIT;
 
         set_personality(personality);
 
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 8dbc126f715..87acc25d7a3 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -868,6 +868,13 @@ static void reset_ctrl_regs(void *info)
                  */
                 asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
                 isb();
+
+                /*
+                 * Clear any configured vector-catch events before
+                 * enabling monitor mode.
+                 */
+                asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+                isb();
         }
 
         if (enable_monitor_mode())
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 69cfee0fe00..979da3947f4 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -221,7 +221,7 @@ again:
         prev_raw_count &= armpmu->max_period;
 
         if (overflow)
-                delta = armpmu->max_period - prev_raw_count + new_raw_count;
+                delta = armpmu->max_period - prev_raw_count + new_raw_count + 1;
         else
                 delta = new_raw_count - prev_raw_count;
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 94bbedbed63..5e1e5419722 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -372,6 +372,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
         if (clone_flags & CLONE_SETTLS)
                 thread->tp_value = regs->ARM_r3;
 
+        thread_notify(THREAD_NOTIFY_COPY, thread);
+
         return 0;
 }
 
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 7a576092291..40ee7e5045e 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -158,7 +158,7 @@ static int emulate_swpX(unsigned int address, unsigned int *data,
 
         if (res == 0) {
                 /*
-                 * Barrier also required between aquiring a lock for a
+                 * Barrier also required between acquiring a lock for a
                  * protected resource and accessing the resource. Inserted for
                  * same reason as above.
                  */
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f0000e188c8..3b54ad19d48 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -410,8 +410,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
         struct thread_info *thread = current_thread_info();
         siginfo_t info;
 
-        if (current->personality != PER_LINUX &&
-            current->personality != PER_LINUX_32BIT &&
+        if ((current->personality & PER_MASK) != PER_LINUX &&
             thread->exec_domain->handler) {
                 thread->exec_domain->handler(n, regs);
                 return regs->ARM_r0;
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 2e74a19874d..295e1e77fa6 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -76,7 +76,7 @@ static struct at91_udc_data __initdata carmeva_udc_data = {
         .pullup_pin     = AT91_PIN_PD9,
 };
 
-/* FIXME: user dependant */
+/* FIXME: user dependent */
 // static struct at91_cf_data __initdata carmeva_cf_data = {
 //      .det_pin        = AT91_PIN_PB0,
 //      .rst_pin        = AT91_PIN_PC5,
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 27ac6f550fe..02182c16a02 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -102,7 +102,7 @@
 #define         AT91_MCI_RDIRE          (1 << 17)       /* Response Direction Error */
 #define         AT91_MCI_RCRCE          (1 << 18)       /* Response CRC Error */
 #define         AT91_MCI_RENDE          (1 << 19)       /* Response End Bit Error */
-#define         AT91_MCI_RTOE           (1 << 20)       /* Reponse Time-out Error */
+#define         AT91_MCI_RTOE           (1 << 20)       /* Response Time-out Error */
 #define         AT91_MCI_DCRCE          (1 << 21)       /* Data CRC Error */
 #define         AT91_MCI_DTOE           (1 << 22)       /* Data Time-out Error */
 #define         AT91_MCI_OVRE           (1 << 30)       /* Overrun */
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index ddeb6453675..056dc6674b6 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -208,7 +208,7 @@ extern void at91_gpio_resume(void);
 
 /*-------------------------------------------------------------------------*/
 
-/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+/* wrappers for "new style" GPIO calls. the old AT91-specific ones should
  * eventually be removed (along with this errno.h inclusion), and the
  * gpio request/free calls should probably be implemented.
  */
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index 77f84b40dda..a1f328357aa 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -551,7 +551,7 @@ int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Config
 
 /****************************************************************************/
 /**
-*  @brief   Check the existance of pending descriptor
+*  @brief   Check the existence of pending descriptor
 *
 *  This function confirmes if there is any pending descriptor in the chain
 *  to program the channel
@@ -775,7 +775,7 @@ int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Cha
 /**
 *  @brief   Read data DMAed to memory
 *
-*  This function will read data that has been DMAed to memory while transfering from:
+*  This function will read data that has been DMAed to memory while transferring from:
 *          - Memory to memory
 *          - Peripheral to memory
 *
@@ -941,7 +941,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configurat
 /**
 *  @brief   Sets channel specific user data
 *
-*  This function associates user data to a specif DMA channel
+*  This function associates user data to a specific DMA channel
 *
 */
 /****************************************************************************/
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 8d1baf3f468..d87ad30dda3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -629,7 +629,7 @@ EXPORT_SYMBOL(dma_get_device_descriptor_ring);
 *   Configures a DMA channel.
 *
 *   @return
-*       >= 0    - Initialization was successfull.
+*       >= 0    - Initialization was successful.
 *
 *       -EBUSY  - Device is currently being used.
 *       -ENODEV - Device handed in is invalid.
@@ -673,7 +673,7 @@ static int ConfigChannel(DMA_Handle_t handle)
 /**
 *   Initializes all of the data structures associated with the DMA.
 *   @return
-*       >= 0    - Initialization was successfull.
+*       >= 0    - Initialization was successful.
 *
 *       -EBUSY  - Device is currently being used.
 *       -ENODEV - Device handed in is invalid.
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 6c8da2b9fc1..e6a1dc484ca 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -362,7 +362,7 @@ int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configurati
 /**
 *  @brief   Read data DMA transferred to memory
 *
-*  This function will read data that has been DMAed to memory while transfering from:
+*  This function will read data that has been DMAed to memory while transferring from:
 *          - Memory to memory
 *          - Peripheral to memory
 *
@@ -446,7 +446,7 @@ void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle *
 
 /****************************************************************************/
 /**
-*  @brief   Check the existance of pending descriptor
+*  @brief   Check the existence of pending descriptor
 *
 *  This function confirmes if there is any pending descriptor in the chain
 *  to program the channel
@@ -542,7 +542,7 @@ dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
 /**
 *  @brief   Sets channel specific user data
 *
-*  This function associates user data to a specif DMA channel
+*  This function associates user data to a specific DMA channel
 *
 */
 /****************************************************************************/
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
index 70eaea866cf..161973385fa 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -180,7 +180,7 @@ typedef enum {
 
 #define chipcHw_XTAL_FREQ_Hz                    25000000        /* Reference clock frequency in Hz */
 
-/* Programable pin defines */
+/* Programmable pin defines */
 #define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
                                                                              /* GPIO pin 0 - 60 */
 #define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)        /* UART Transmit */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
index c78833acb37..03238c29900 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -832,7 +832,7 @@ static inline void chipcHw_setUsbDevice(void)
 
 /****************************************************************************/
 /**
-*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*  @brief   Lower layer function to enable/disable a clock of a certain device
 *
 *  This function enables/disables a core clock
 *
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
index e01fc4607c9..0aeb6a6fe7f 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -109,9 +109,9 @@
 #define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
 
 /* INTC1 - interrupt controller 1 */
-#define INTCHW_INTC1_DDRVPMP_BITNUM       27    /* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27    /* DDR and VPM PLL clock phase relationship interrupt (Not for A0) */
 #define INTCHW_INTC1_DDRVPMT_BITNUM       26    /* DDR and VPM HW phase align timeout interrupt (Not for A0) */
-#define INTCHW_INTC1_DDRP_BITNUM          26    /* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_DDRP_BITNUM          26    /* DDR and PLL clock phase relationship interrupt (For A0 only)) */
 #define INTCHW_INTC1_RTC2_BITNUM          25    /* Real time clock tamper interrupt */
 #define INTCHW_INTC1_VDEC_BITNUM          24    /* Hantro Video Decoder interrupt */
 /* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
index 06a355481ea..0992842caa7 100644
--- a/arch/arm/mach-bcmring/include/mach/reg_umi.h
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -88,7 +88,7 @@
 /* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
 /* Enable wait pin during burst write or read */
 #define REG_UMI_TCR_WAITEN              0x80000000
-/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */
+/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */
 #define REG_UMI_TCR_LOWFREQ             0x40000000
 /* 1=synch write, 0=async write */
 #define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c389ff1020..3e7be2de96d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -11,7 +11,7 @@
  * DM644X-EVM board. It has:
  *      DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
  *      USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
- *      Additionaly realtime clock, IR remote control receiver,
+ *      Additionally realtime clock, IR remote control receiver,
  *      IR Blaster based on MSP430 (firmware although is different
  *      from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
  *      with PATA interface, two muxed red-green leds.
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
index 4a68c2b1ec1..0a95be1512b 100644
--- a/arch/arm/mach-davinci/cpufreq.c
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -167,7 +167,7 @@ static int davinci_cpu_init(struct cpufreq_policy *policy)
         /*
          * Time measurement across the target() function yields ~1500-1800us
          * time taken with no drivers on notification list.
-         * Setting the latency to 2000 us to accomodate addition of drivers
+         * Setting the latency to 2000 us to accommodate addition of drivers
          * to pre/post change notification list.
          */
         policy->cpuinfo.transition_latency = 2000 * 1000;
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 68fe4c289d7..b95b9196dee 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1123,7 +1123,7 @@ void __init da850_init(void)
          * This helps keeping the peripherals on this domain insulated
          * from CPU frequency changes caused by DVFS. The firmware sets
          * both PLL0 and PLL1 to the same frequency so, there should not
-         * be any noticible change even in non-DVFS use cases.
+         * be any noticeable change even in non-DVFS use cases.
          */
         da850_set_async3_src(1);
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 76364d1345d..f6801223964 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
         .name = "timer2",
         .parent = &pll1_aux_clk,
         .lpsc = DAVINCI_LPSC_TIMER2,
-        .usecount = 1,              /* REVISIT: why cant' this be disabled? */
+        .usecount = 1,              /* REVISIT: why can't' this be disabled? */
 };
 
 static struct clk timer3_clk = {
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 9a2376b3137..5f8a6542418 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
         .name = "timer2",
         .parent = &pll1_aux_clk,
         .lpsc = DAVINCI_LPSC_TIMER2,
-        .usecount = 1,              /* REVISIT: why cant' this be disabled? */
+        .usecount = 1,              /* REVISIT: why can't' this be disabled? */
 };
 
 static struct clk_lookup dm644x_clks[] = {
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
index cea6b897204..957fb87e832 100644
--- a/arch/arm/mach-davinci/include/mach/cputype.h
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -4,7 +4,7 @@
  * Author: Kevin Hilman, Deep Root Systems, LLC
  *
  * Defines the cpu_is_*() macros for runtime detection of DaVinci
- * device type.  In addtion, if support for a given device is not
+ * device type.  In addition, if support for a given device is not
  * compiled in to the kernel, the macros return 0 so that
  * resulting code can be optimized out.
  *
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 180b8a9d0d2..a5a9ff70b19 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -101,7 +101,7 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
         /*
-         * map discontiguous hw irq range to continous sw irq range:
+         * map discontiguous hw irq range to continuous sw irq range:
          *
          *  IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
          */
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index 939728b38d4..be9266b10fd 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -18,7 +18,7 @@
 #define gpio_cansleep   __gpio_cansleep
 #define gpio_to_irq     __gpio_to_irq
 
-/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
+/* Practically, GPIO banks up to GPZ are the configurable gpio banks */
 
 /* GPIO bank sizes */
 #define EXYNOS4_GPIO_A0_NR      (8)
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index af82a8fbb68..14ac10b7ec0 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -276,7 +276,7 @@ static void exynos4_mct_tick_start(unsigned long cycles,
         /* update interrupt count buffer */
         exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
 
-        /* enable MCT tick interupt */
+        /* enable MCT tick interrupt */
         exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
 
         tmp = __raw_readl(mevt->base + MCT_L_TCON_OFFSET);
diff --git a/arch/arm/mach-exynos4/setup-sdhci-gpio.c b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
index 1b3d3a2de95..e8d08bf8965 100644
--- a/arch/arm/mach-exynos4/setup-sdhci-gpio.c
+++ b/arch/arm/mach-exynos4/setup-sdhci-gpio.c
@@ -38,14 +38,14 @@ void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
         switch (width) {
         case 8:
                 for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
-                        /* Data pin GPK1[3:6] to special-funtion 3 */
+                        /* Data pin GPK1[3:6] to special-function 3 */
                         s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
                         s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
                         s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
                 }
         case 4:
                 for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
-                        /* Data pin GPK0[3:6] to special-funtion 2 */
+                        /* Data pin GPK0[3:6] to special-function 2 */
                         s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
                         s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
                         s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
index 85f9433d483..1e83f8cf236 100644
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ b/arch/arm/mach-exynos4/setup-sdhci.c
@@ -35,7 +35,7 @@ void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
 {
         u32 ctrl2, ctrl3;
 
-        /* don't need to alter anything acording to card-type */
+        /* don't need to alter anything according to card-type */
 
         ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
 
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 773ea0c95b9..ba3dae352a2 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -225,7 +225,7 @@ static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
 /* This routine checks the status of the last configuration cycle.  If an error
  * was detected it returns >0, else it returns a 0.  The errors being checked
  * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
  * the discovery stage.
  */
 static int iop13xx_atux_pci_status(int clear)
@@ -332,7 +332,7 @@ static struct pci_ops iop13xx_atux_ops = {
 /* This routine checks the status of the last configuration cycle.  If an error
  * was detected it returns >0, else it returns a 0.  The errors being checked
  * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
+ * errors occur during a config cycle where there is no device, like during
  * the discovery stage.
  */
 static int iop13xx_atue_pci_status(int clear)
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
index f781164e623..24294b2bc46 100644
--- a/arch/arm/mach-kirkwood/tsx1x-common.c
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -15,7 +15,7 @@
 
 /****************************************************************************
  * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     the QNAP firmware.
  * Layout as used by QNAP:
  *  0x00000000-0x00080000 : "U-Boot"
diff --git a/arch/arm/mach-lpc32xx/pm.c b/arch/arm/mach-lpc32xx/pm.c
index e76d41bb705..b9c80597b7b 100644
--- a/arch/arm/mach-lpc32xx/pm.c
+++ b/arch/arm/mach-lpc32xx/pm.c
@@ -41,7 +41,7 @@
  * DRAM clocking and refresh are slightly different for systems with DDR
  * DRAM or regular SDRAM devices. If SDRAM is used in the system, the
  * SDRAM will still be accessible in direct-run mode. In DDR based systems,
- * a transistion to direct-run mode will stop all DDR accesses (no clocks).
+ * a transition to direct-run mode will stop all DDR accesses (no clocks).
  * Because of this, the code to switch power modes and the code to enter
  * and exit DRAM self-refresh modes must not be executed in DRAM. A small
  * section of IRAM is used instead for this.
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index ee8b02ed801..7bfb827f3fe 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -10,7 +10,7 @@
 #define BANK_OFF(n)     (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPIO_REG(x)     (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
 
-#define NR_BUILTIN_GPIO (192)
+#define NR_BUILTIN_GPIO         IRQ_GPIO_NUM
 
 #define gpio_to_bank(gpio)      ((gpio) >> 5)
 #define gpio_to_irq(gpio)       (IRQ_GPIO_START + (gpio))
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 4621067c772..713be155a44 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -8,6 +8,15 @@
 #define MFP_DRIVE_MEDIUM        (0x2 << 13)
 #define MFP_DRIVE_FAST          (0x3 << 13)
 
+#undef MFP_CFG
+#undef MFP_CFG_DRV
+
+#define MFP_CFG(pin, af)                \
+        (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_MEDIUM)
+
+#define MFP_CFG_DRV(pin, af, drv)       \
+        (MFP_LPM_INPUT | MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DRIVE_##drv)
+
 /* GPIO */
 #define GPIO0_GPIO              MFP_CFG(GPIO0, AF5)
 #define GPIO1_GPIO              MFP_CFG(GPIO1, AF5)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index aeb9ae23e6c..99833b9485c 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -9,7 +9,7 @@
  *   2008-04-11: Jason Chagas <Jason.chagas@marvell.com>
  *   2008-10-08: Bin Yang <bin.yang@marvell.com>
  *
- * The timers module actually includes three timers, each timer with upto
+ * The timers module actually includes three timers, each timer with up to
  * three match comparators. Timer #0 is used here in free-running mode as
  * the clock source, and match comparator #1 used as clock event device.
  *
diff --git a/arch/arm/mach-msm/acpuclock-arm11.c b/arch/arm/mach-msm/acpuclock-arm11.c
index 7ffbd987eb5..805d4ee53f7 100644
--- a/arch/arm/mach-msm/acpuclock-arm11.c
+++ b/arch/arm/mach-msm/acpuclock-arm11.c
@@ -343,7 +343,7 @@ int acpuclk_set_rate(unsigned long rate, int for_power_collapse)
                 }
         }
 
-        /* Set wait states for CPU inbetween frequency changes */
+        /* Set wait states for CPU between frequency changes */
         reg_clkctl = readl(A11S_CLK_CNTL_ADDR);
         reg_clkctl |= (100 << 16); /* set WT_ST_CNT */
         writel(reg_clkctl, A11S_CLK_CNTL_ADDR);
diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
index cfa808dd489..232f97a0450 100644
--- a/arch/arm/mach-msm/scm.c
+++ b/arch/arm/mach-msm/scm.c
@@ -46,7 +46,7 @@ static DEFINE_MUTEX(scm_lock);
  * @id: command to be executed
  * @buf: buffer returned from scm_get_command_buffer()
  *
- * An SCM command is layed out in memory as follows:
+ * An SCM command is laid out in memory as follows:
  *
  *      ------------------- <--- struct scm_command
  *      | command header  |
diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 927d5a18176..c1c5fb6a5b4 100644
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -79,7 +79,7 @@
 
 
 /*
- * Register useage
+ * Register usage
  * r8  - temporary
  * r9  - the driver buffer
  * r10 - temporary
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d41fe2d0616..0ad781db4e6 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -399,7 +399,7 @@ static void __init omap_sx1_init(void)
         sx1_mmc_init();
 
         /* turn on USB power */
-        /* sx1_setusbpower(1); cant do it here because i2c is not ready */
+        /* sx1_setusbpower(1); can't do it here because i2c is not ready */
         gpio_request(1, "A_IRDA_OFF");
         gpio_request(11, "A_SWITCH");
         gpio_request(15, "A_USB_ON");
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b0f4c231595..36f26c3fa25 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -281,7 +281,7 @@ static inline void omap_init_audio(void) {}
  * Claiming GPIOs, and setting their direction and initial values, is the
  * responsibility of the device drivers.  So is responding to probe().
  *
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
  * kept out of drivers as much as possible.  In particular, pin setup
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index 7a2df29400c..23eed0035ed 100644
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -31,7 +31,7 @@
 #endif
 
 /*
- * These are the offsets from the begining of the fiq_buffer. They are put here
+ * These are the offsets from the beginning of the fiq_buffer. They are put here
  * since the buffer and header need to be accessed by drivers servicing devices
  * which generate GPIO interrupts - e.g. keyboard, modem, hook switch.
  */
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5f8a2fd0633..34cf982b967 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -696,7 +696,7 @@ static void __init igep2_init(void)
         igep2_init_smsc911x();
 
         /*
-         * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+         * WLAN-BT combo module from MuRata which has a Marvell WLAN
          * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
          */
         igep2_wlan_bt_init();
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index b10db0e6ee6..2cf86c3cb1a 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -440,7 +440,7 @@ static void __init igep3_init(void)
         igep3_leds_init();
 
         /*
-         * WLAN-BT combo module from MuRata wich has a Marvell WLAN
+         * WLAN-BT combo module from MuRata which has a Marvell WLAN
          * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface.
          */
         igep3_wifi_bt_init();
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index ab878545bd9..6cb6c03293d 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -258,7 +258,7 @@ static void _resolve_clkdm_deps(struct clockdomain *clkdm,
  * clkdm_init - set up the clockdomain layer
  * @clkdms: optional pointer to an array of clockdomains to register
  * @init_autodeps: optional pointer to an array of autodeps to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Set up internal state.  If a pointer to an array of clockdomains
  * @clkdms was supplied, loop through the list of clockdomains,
diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index 85b3dce6564..5823584d9cd 100644
--- a/arch/arm/mach-omap2/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -125,7 +125,7 @@ struct clockdomain {
 };
 
 /**
- * struct clkdm_ops - Arch specfic function implementations
+ * struct clkdm_ops - Arch specific function implementations
  * @clkdm_add_wkdep: Add a wakeup dependency between clk domains
  * @clkdm_del_wkdep: Delete a wakeup dependency between clk domains
  * @clkdm_read_wkdep: Read wakeup dependency state between clk domains
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a44c5230340..1c240eff391 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -297,8 +297,8 @@ DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
 /**
  * omap3_cpuidle_update_states() - Update the cpuidle states
- * @mpu_deepest_state:  Enable states upto and including this for mpu domain
- * @core_deepest_state: Enable states upto and including this for core domain
+ * @mpu_deepest_state:  Enable states up to and including this for mpu domain
+ * @core_deepest_state: Enable states up to and including this for core domain
  *
  * This goes through the list of states available and enables and disables the
  * validity of C states based on deepest state that can be achieved for the
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 84d1b735fe8..7b855856459 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -253,7 +253,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
                         ARRAY_SIZE(omap_keyboard_latency), 0);
 
         if (IS_ERR(od)) {
-                WARN(1, "Cant build omap_device for %s:%s.\n",
+                WARN(1, "Can't build omap_device for %s:%s.\n",
                                                 name, oh->name);
                 return PTR_ERR(od);
         }
@@ -373,7 +373,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
         od = omap_device_build(name, spi_num, oh, pdata,
                                 sizeof(*pdata), omap_mcspi_latency,
                                 ARRAY_SIZE(omap_mcspi_latency), 0);
-        WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
+        WARN(IS_ERR(od), "Can't build omap_device for %s:%s\n",
                                 name, oh->name);
         kfree(pdata);
         return 0;
@@ -725,7 +725,7 @@ static int __init omap_init_wdt(void)
         od = omap_device_build(dev_name, id, oh, NULL, 0,
                                 omap_wdt_latency,
                                 ARRAY_SIZE(omap_wdt_latency), 0);
-        WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
+        WARN(IS_ERR(od), "Can't build omap_device for %s:%s.\n",
                                 dev_name, oh->name);
         return 0;
 }
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index 34922b2d2e3..c9ff0e79703 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -262,7 +262,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
                         omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
         kfree(p);
         if (IS_ERR(od)) {
-                pr_err("%s: Cant build omap_device for %s:%s.\n",
+                pr_err("%s: Can't build omap_device for %s:%s.\n",
                         __func__, name, oh->name);
                 return PTR_ERR(od);
         }
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index 413de18c1d2..9529842ae05 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -82,7 +82,7 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
         kfree(pdata);
 
         if (IS_ERR(od)) {
-                WARN(1, "Cant build omap_device for %s:%s.\n",
+                WARN(1, "Can't build omap_device for %s:%s.\n",
                                         name, oh->name);
                 return PTR_ERR(od);
         }
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 137e1a5f3d8..b2f30bed5a2 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -465,7 +465,7 @@ void __init omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
         od = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
                 sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false);
         if (IS_ERR(od)) {
-                WARN(1, "Cant build omap_device for %s:%s.\n", name, oh->name);
+                WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
                 kfree(mmc_data->slots[0].name);
                 goto done;
         }
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 565b9064a32..4a6ef6ab845 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -149,7 +149,7 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
                                 ARRAY_SIZE(omap2_mcbsp_latency), false);
         kfree(pdata);
         if (IS_ERR(od))  {
-                pr_err("%s: Cant build omap_device for %s:%s.\n", __func__,
+                pr_err("%s: Can't build omap_device for %s:%s.\n", __func__,
                                         name, oh->name);
                 return PTR_ERR(od);
         }
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index bb043cbb388..a4ab1e36431 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -518,7 +518,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
                         seq_printf(s, "/* %s */\n", m->muxnames[mode]);
 
                 /*
-                 * XXX: Might be revisited to support differences accross
+                 * XXX: Might be revisited to support differences across
                  * same OMAP generation.
                  */
                 seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
diff --git a/arch/arm/mach-omap2/mux2430.h b/arch/arm/mach-omap2/mux2430.h
index adbea0d03e0..9fd93149ebd 100644
--- a/arch/arm/mach-omap2/mux2430.h
+++ b/arch/arm/mach-omap2/mux2430.h
@@ -22,7 +22,7 @@
  * absolute addresses.  The name in the macro is the mode-0 name of
  * the pin.  NOTE: These registers are 8-bits wide.
  *
- * Note that these defines use SDMMC instead of MMC for compability
+ * Note that these defines use SDMMC instead of MMC for compatibility
  * with signal names used in 3630.
  */
 #define OMAP2430_CONTROL_PADCONF_GPMC_CLK_OFFSET                0x000
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index a860fb5024c..e6e3810db77 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1559,7 +1559,7 @@ static struct omap_hwmod omap2430_i2c1_hwmod = {
                          * I2CHS IP's do not follow the usual pattern.
                          * prcm_reg_id alone cannot be used to program
                          * the iclk and fclk. Needs to be handled using
-                         * additonal flags when clk handling is moved
+                         * additional flags when clk handling is moved
                          * to hwmod framework.
                          */
                         .module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index e2e605fe913..05f6abc96b0 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -112,12 +112,12 @@ int omap4430_phy_power(struct device *dev, int ID, int on)
                 else
                         /*
                          * Enable VBUS Valid, AValid and IDDIG
-                         * high impedence
+                         * high impedance
                          */
                         __raw_writel(IDDIG | AVALID | VBUSVALID,
                                                 ctrl_base + USBOTGHS_CONTROL);
         } else {
-                /* Enable session END and IDIG to high impedence. */
+                /* Enable session END and IDIG to high impedance. */
                 __raw_writel(SESSEND | IDDIG, ctrl_base +
                                         USBOTGHS_CONTROL);
         }
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 0a8e74e3e81..07d6140baa9 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -308,7 +308,7 @@ int __init omap3_twl_init(void)
  * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages,
  * in those scenarios this bit is to be cleared (enable = false).
  *
- * Returns 0 on sucess, error is returned if I2C read/write fails.
+ * Returns 0 on success, error is returned if I2C read/write fails.
  */
 int __init omap3_twl_set_sr_bit(bool enable)
 {
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 49c6513e90d..9af08473bf1 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -196,7 +196,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 /**
  * pwrdm_init - set up the powerdomain layer
  * @pwrdm_list: array of struct powerdomain pointers to register
- * @custom_funcs: func pointers for arch specfic implementations
+ * @custom_funcs: func pointers for arch specific implementations
  *
  * Loop through the array of powerdomains @pwrdm_list, registering all
  * that are available on the current CPU. If pwrdm_list is supplied
diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 027f40bd235..d23d979b9c3 100644
--- a/arch/arm/mach-omap2/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -121,7 +121,7 @@ struct powerdomain {
 };
 
 /**
- * struct pwrdm_ops - Arch specfic function implementations
+ * struct pwrdm_ops - Arch specific function implementations
  * @pwrdm_set_next_pwrst: Set the target power state for a pd
  * @pwrdm_read_next_pwrst: Read the target power state set for a pd
  * @pwrdm_read_pwrst: Read the current power state of a pd
diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index 9c9c113788b..469a920a74d 100644
--- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -72,7 +72,7 @@ static struct powerdomain mpu_3xxx_pwrdm = {
 
 /*
  * The USBTLL Save-and-Restore mechanism is broken on
- * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
+ * 3430s up to ES3.0 and 3630ES1.0. Hence this feature
  * needs to be disabled on these chips.
  * Refer: 3430 errata ID i459 and 3630 errata ID i579
  *
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 8f674c9442b..13e24f913dd 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -247,7 +247,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  * driver register and sr device intializtion API's. Only one call
  * will ultimately succeed.
  *
- * Currenly this function registers interrrupt handler for a particular SR
+ * Currently this function registers interrrupt handler for a particular SR
  * if smartreflex class driver is already registered and has
  * requested for interrupts and the SR interrupt line in present.
  */
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index c6facf7becf..6fb520999b6 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -851,7 +851,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
  * @voltdm:     pointer to the VDD whose voltage is to be reset.
  *
  * This API finds out the correct voltage the voltage domain is supposed
- * to be at and resets the voltage to that level. Should be used expecially
+ * to be at and resets the voltage to that level. Should be used especially
  * while disabling any voltage compensation modules.
  */
 void omap_voltage_reset(struct voltagedomain *voltdm)
@@ -912,7 +912,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm,
  * This API searches only through the non-compensated voltages int the
  * voltage table.
  * Returns pointer to the voltage table entry corresponding to volt on
- * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * success. Returns -ENODATA if no voltage table exisits for the passed voltage
  * domain or if there is no matching entry.
  */
 struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 1a5d6a0e260..5ceafdccc45 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -19,7 +19,7 @@
 #include "common.h"
 
 /*
- * The Orion has fully programable address map. There's a separate address
+ * The Orion has fully programmable address map. There's a separate address
  * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIe, USB,
  * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
  * address decode windows that allow it to access any of the Orion resources.
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fd..a5930f83958 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
  * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
  * single GPIO line and are compatible with the leds-gpio driver.
  *
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
  * in the following array:
  *
  * SATAx blue LED | SATAx activity | LED state
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index f0f43e13ac8..e6d64494d3d 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -36,7 +36,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 92f393f08fa..9eac8192d92 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -56,7 +56,7 @@
 
 /****************************************************************************
  * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
+ *     partitions on the device because we want to keep compatibility with
  *     existing QNAP firmware.
  *
  * Layout as used by QNAP:
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index b024a8b3743..c4639502efc 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -99,11 +99,24 @@
 #define GAFR(x)         GPIO_REG(0x54 + (((x) & 0x70) >> 2))
 
 
-#define NR_BUILTIN_GPIO 128
+#define NR_BUILTIN_GPIO         PXA_GPIO_IRQ_NUM
 
 #define gpio_to_bank(gpio)      ((gpio) >> 5)
 #define gpio_to_irq(gpio)       IRQ_GPIO(gpio)
-#define irq_to_gpio(irq)        IRQ_TO_GPIO(irq)
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+        int gpio;
+
+        if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1)
+                return irq - IRQ_GPIO0;
+
+        gpio = irq - PXA_GPIO_IRQ_BASE;
+        if (gpio >= 2 && gpio < NR_BUILTIN_GPIO)
+                return gpio;
+
+        return -1;
+}
 
 #ifdef CONFIG_CPU_PXA26x
 /* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index a4285fc0087..038402404e3 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -93,9 +93,6 @@
 #define GPIO_2_x_TO_IRQ(x)      (PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)     (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
 
-#define IRQ_TO_GPIO_2_x(i)      ((i) - PXA_GPIO_IRQ_BASE)
-#define IRQ_TO_GPIO(i)  (((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
-
 /*
  * The following interrupts are for board specific purposes. Since
  * the kernel can only run on one machine at a time, we can re-use
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e4fb4668c26..207ecb49a61 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -38,7 +38,7 @@
 #define PCMD(x)         __REG(0x40F50110 + ((x) << 2))
 
 /*
- * Slave Power Managment Unit
+ * Slave Power Management Unit
  */
 #define ASCR            __REG(0x40f40000)       /* Application Subsystem Power Status/Configuration */
 #define ARSR            __REG(0x40f40004)       /* Application Subsystem Reset Status */
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index faa408ab7ad..0641f31a56b 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -64,7 +64,7 @@
 
 /*
  * CPLD registers:
- * Only 4 registers, but spreaded over a 32MB address space.
+ * Only 4 registers, but spread over a 32MB address space.
  * Be gentle, and remap that over 32kB...
  */
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index dd13bb63259..23925db8ff7 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -458,7 +458,7 @@ static struct platform_device strataflash = {
 /*
  * Suspend/Resume bootstrap management
  *
- * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * MIO A701 reboot sequence is highly ROM dependent. From the one dissassembled,
  * this sequence is as follows :
  *   - disables interrupts
  *   - initialize SDRAM (self refresh RAM into active RAM)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 6bde5956358..a4af8c52d7e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -285,7 +285,7 @@ static inline void pxa25x_init_pm(void) {}
 
 static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
 {
-        int gpio = IRQ_TO_GPIO(d->irq);
+        int gpio = irq_to_gpio(d->irq);
         uint32_t mask = 0;
 
         if (gpio >= 0 && gpio < 85)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 1cb5d0f9723..909756eaf4b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -345,7 +345,7 @@ static inline void pxa27x_init_pm(void) {}
  */
 static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
 {
-        int gpio = IRQ_TO_GPIO(d->irq);
+        int gpio = irq_to_gpio(d->irq);
         uint32_t mask;
 
         if (gpio >= 0 && gpio < 128)
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index cf68136cc66..b2b2a5bb275 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -19,7 +19,7 @@
 #define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
 
 /* We use `virtual` dma channels to hide the fact we have only a limited
- * number of DMA channels, and not of all of them (dependant on the device)
+ * number of DMA channels, and not of all of them (dependent on the device)
  * can be attached to any DMA source. We therefore let the DMA core handle
  * the allocation of hardware channels to clients.
 */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 7f7c5294796..988a6863e54 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -101,7 +101,7 @@
 #define S3C2410_BANKCON_PMC16           (0x03)
 
 /* bank configurations for banks 0..7, note banks
- * 6 and 7 have differnt configurations depending on
+ * 6 and 7 have different configurations depending on
  * the memory type bits */
 
 #define S3C2410_BANKCON_Tacp2           (0x0 << 2)
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 66f44440d5d..079dcaa602d 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -252,7 +252,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
         .def_trigger    = "",
 };
 
-/* This is the blue LED on the device. Originaly used to indicate GPS activity
+/* This is the blue LED on the device. Originally used to indicate GPS activity
  * by flashing. */
 static struct s3c24xx_led_platdata n35_blue_led_pdata = {
         .name           = "blue_led",
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index dfedc9c9e00..dd3120df09f 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -155,7 +155,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
          * the same timings, however, anything smaller than 1024x768
          * will only be displayed in the top left corner of a 1024x768
          * XGA output unless you add optional dip switches to the shield.
-         * Therefore timings for other resolutions have been ommited here.
+         * Therefore timings for other resolutions have been omitted here.
          */
         [2] = {
                 _LCD_DECLARE(
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index c35585cf8c4..b197171e7d0 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -315,7 +315,7 @@ int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
         case S3C2410_DMAOP_FLUSH:
                 return s3c64xx_dma_flush(chan);
 
-        /* belive PAUSE/RESUME are no-ops */
+        /* believe PAUSE/RESUME are no-ops */
         case S3C2410_DMAOP_PAUSE:
         case S3C2410_DMAOP_RESUME:
         case S3C2410_DMAOP_STARTED:
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
index 4be4cc9abf7..07aa4d6054f 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -29,7 +29,7 @@
 #define WPALCON_H                                       (0x19c)
 #define WPALCON_L                                       (0x1a0)
 
-/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but
  * different for WPAL2-4
  */
 /* In WPALCON_L (aka WPALCON) */
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index f16946e456e..be25879bb2e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -40,7 +40,7 @@ void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
 {
         u32 ctrl2, ctrl3;
 
-        /* don't need to alter anything acording to card-type */
+        /* don't need to alter anything according to card-type */
 
         writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
 
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index 1f4b595534c..a5a1e331f8e 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -18,7 +18,7 @@
 #define gpio_cansleep   __gpio_cansleep
 #define gpio_to_irq     __gpio_to_irq
 
-/* Practically, GPIO banks upto MP03 are the configurable gpio banks */
+/* Practically, GPIO banks up to MP03 are the configurable gpio banks */
 
 /* GPIO bank sizes */
 #define S5PV210_GPIO_A0_NR      (8)
diff --git a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
index 746777d56df..3e3ac05bb7b 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci-gpio.c
@@ -32,10 +32,10 @@ void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 
         switch (width) {
         case 8:
-                /* GPG1[3:6] special-funtion 3 */
+                /* GPG1[3:6] special-function 3 */
                 s3c_gpio_cfgrange_nopull(S5PV210_GPG1(3), 4, S3C_GPIO_SFN(3));
         case 4:
-                /* GPG0[3:6] special-funtion 2 */
+                /* GPG0[3:6] special-function 2 */
                 s3c_gpio_cfgrange_nopull(S5PV210_GPG0(3), 4, S3C_GPIO_SFN(2));
         default:
                 break;
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index c32e202731c..a83b6c909f6 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -38,7 +38,7 @@ void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
 {
         u32 ctrl2, ctrl3;
 
-        /* don't need to alter anything acording to card-type */
+        /* don't need to alter anything according to card-type */
 
         writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
 
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index e697691eed2..41252d22e65 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -50,7 +50,7 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# Miscelaneous functions
+# Miscellaneous functions
 obj-$(CONFIG_PM)                        += pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)                += ssp.o
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 07d4e8ba371..aaa8acf76b7 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -68,7 +68,7 @@
  * clock change in ROM and jump to that code from the kernel. The main
  * disadvantage is that the ROM has to be modified, which is not
  * possible on all SA-1100 platforms. Another disadvantage is that
- * jumping to ROM makes clock switching unecessary complicated.
+ * jumping to ROM makes clock switching unnecessary complicated.
  *
  * The idea behind this driver is that the memory configuration can be
  * changed while running from DRAM (even with interrupts turned on!)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
index 4f7ea012e1e..bae8296f5db 100644
--- a/arch/arm/mach-sa1100/include/mach/SA-1100.h
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -1794,7 +1794,7 @@
                         (DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
                          DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
 
-#define DCSR_RUN        0x00000001      /* DMA RUNing                      */
+#define DCSR_RUN        0x00000001      /* DMA running                     */
 #define DCSR_IE         0x00000002      /* DMA Interrupt Enable            */
 #define DCSR_ERROR      0x00000004      /* DMA ERROR                       */
 #define DCSR_DONEA      0x00000008      /* DONE DMA transfer buffer A      */
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 9d490c66891..f50b00bd18a 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -29,7 +29,7 @@ static unsigned long jornada_ssp_flags;
 /**
  * jornada_ssp_reverse - reverses input byte
  *
- * we need to reverse all data we recieve from the mcu due to its physical location
+ * we need to reverse all data we receive from the mcu due to its physical location
  * returns : 01110111 -> 11101110
  */
 u8 inline jornada_ssp_reverse(u8 byte)
@@ -179,7 +179,7 @@ static int __devinit jornada_ssp_probe(struct platform_device *dev)
 
 static int jornada_ssp_remove(struct platform_device *dev)
 {
-        /* Note that this doesnt actually remove the driver, since theres nothing to remove
+        /* Note that this doesn't actually remove the driver, since theres nothing to remove
          * It just makes sure everything is turned off */
         GPSR = GPIO_GPIO25;
         ssp_exit();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 783b66fa95f..1e35fa976d6 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -947,7 +947,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
         &ap4evb_camera,
 };
 
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
 {
         struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
         int ret;
@@ -988,20 +988,15 @@ static int __init hdmi_init_pm_clock(void)
         pr_debug("PLLC2 set frequency %lu\n", rate);
 
         ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-        if (ret < 0) {
+        if (ret < 0)
                 pr_err("Cannot set HDMI parent: %d\n", ret);
-                goto out;
-        }
 
 out:
         if (!IS_ERR(hdmi_ick))
                 clk_put(hdmi_ick);
-        return ret;
 }
 
-device_initcall(hdmi_init_pm_clock);
-
-static int __init fsi_init_pm_clock(void)
+static void __init fsi_init_pm_clock(void)
 {
         struct clk *fsia_ick;
         int ret;
@@ -1010,7 +1005,7 @@ static int __init fsi_init_pm_clock(void)
         if (IS_ERR(fsia_ick)) {
                 ret = PTR_ERR(fsia_ick);
                 pr_err("Cannot get FSI ICK: %d\n", ret);
-                return ret;
+                return;
         }
 
         ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
@@ -1018,10 +1013,7 @@ static int __init fsi_init_pm_clock(void)
                 pr_err("Cannot set FSI-A parent: %d\n", ret);
 
         clk_put(fsia_ick);
-
-        return ret;
 }
-device_initcall(fsi_init_pm_clock);
 
 /*
  * FIXME !!
@@ -1348,6 +1340,9 @@ static void __init ap4evb_init(void)
         __raw_writel(srcr4 & ~(1 << 13), SRCR4);
 
         platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+
+        hdmi_init_pm_clock();
+        fsi_init_pm_clock();
 }
 
 static void __init ap4evb_timer_init(void)
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 8184d4d4f23..7da2ca24229 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -423,7 +423,7 @@ static struct platform_device fsi_hdmi_device = {
         .name           = "sh_fsi2_b_hdmi",
 };
 
-static int __init hdmi_init_pm_clock(void)
+static void __init hdmi_init_pm_clock(void)
 {
         struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
         int ret;
@@ -467,17 +467,13 @@ static int __init hdmi_init_pm_clock(void)
         pr_debug("PLLC2 set frequency %lu\n", rate);
 
         ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
-        if (ret < 0) {
+        if (ret < 0)
                 pr_err("Cannot set HDMI parent: %d\n", ret);
-                goto out;
-        }
 
 out:
         if (!IS_ERR(hdmi_ick))
                 clk_put(hdmi_ick);
-        return ret;
 }
-device_initcall(hdmi_init_pm_clock);
 
 /* USB1 (Host) */
 static void usb1_host_port_power(int port, int power)
@@ -1218,6 +1214,8 @@ static void __init mackerel_init(void)
         sh7372_add_standard_devices();
 
         platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+
+        hdmi_init_pm_clock();
 }
 
 static void __init mackerel_timer_init(void)
diff --git a/arch/arm/mach-shmobile/include/mach/mmc.h b/arch/arm/mach-shmobile/include/mach/mmc.h
index e11560a525a..21a59db638b 100644
--- a/arch/arm/mach-shmobile/include/mach/mmc.h
+++ b/arch/arm/mach-shmobile/include/mach/mmc.h
@@ -9,7 +9,7 @@
 
 #ifdef CONFIG_MACH_AP4EVB
 #include "mach/mmc-ap4eb.h"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
 #include "mach/mmc-mackerel.h"
 #else
 #error "unsupported board."
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
index 6d6a205bcf9..9320aff0a20 100644
--- a/arch/arm/mach-shmobile/include/mach/zboot.h
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -13,7 +13,7 @@
 #ifdef CONFIG_MACH_AP4EVB
 #define MACH_TYPE       MACH_TYPE_AP4EVB
 #include "mach/head-ap4evb.txt"
-#elif CONFIG_MACH_MACKEREL
+#elif defined(CONFIG_MACH_MACKEREL)
 #define MACH_TYPE       MACH_TYPE_MACKEREL
 #include "mach/head-mackerel.txt"
 #else
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index e945ae28ee7..f4ef5eb317b 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -223,7 +223,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
          *  - Change the source selector to invalid to stop the DMA from
          *    FIFO to memory.
          *  - Read the status register to know the number of pending
-         *    bytes to be transfered.
+         *    bytes to be transferred.
          *  - Finally stop or program the DMA to the next buffer in the
          *    list.
          */
@@ -244,7 +244,7 @@ int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
         if (status & STA_BUSY)
                 req->bytes_transferred -= to_transfer;
 
-        /* In continous transfer mode, DMA only tracks the count of the
+        /* In continuous transfer mode, DMA only tracks the count of the
          * half DMA buffer. So, if the DMA already finished half the DMA
          * then add the half buffer to the completed count.
          *
diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h
index 39011bd9a92..d0132e8031a 100644
--- a/arch/arm/mach-tegra/include/mach/dma.h
+++ b/arch/arm/mach-tegra/include/mach/dma.h
@@ -92,11 +92,11 @@ struct tegra_dma_req {
         /*  This is a called from the DMA ISR context when the DMA is still in
          *  progress and is actively filling same buffer.
          *
-         *  In case of continous mode receive, this threshold is 1/2 the buffer
+         *  In case of continuous mode receive, this threshold is 1/2 the buffer
          *  size. In other cases, this will not even be called as there is no
          *  hardware support for it.
          *
-         * In the case of continous mode receive, if there is next req already
+         * In the case of continuous mode receive, if there is next req already
          * queued, DMA programs the HW to use that req when this req is
          * completed. If there is no "next req" queued, then DMA ISR doesn't do
          * anything before calling this callback.
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index fabcc49abe8..5535dd0a78c 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -263,7 +263,7 @@ static void disable_i2s0_vcxo(void)
         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
         val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-        /* Deactivate VCXO if noone else is using VCXO */
+        /* Deactivate VCXO if no one else is using VCXO */
         if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
                 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -283,7 +283,7 @@ static void disable_i2s1_vcxo(void)
         val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
         val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-        /* Deactivate VCXO if noone else is using VCXO */
+        /* Deactivate VCXO if no one else is using VCXO */
         if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
                 val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
         writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
@@ -649,7 +649,7 @@ static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
  */
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
-        /* TODO: get apropriate switches for EMIFCLK, AHBCLK and MCLK */
+        /* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
         /* Else default to fixed value */
 
         if (clk->round_rate) {
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index dc8746d7826..af913741e6e 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -52,7 +52,7 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = {
          * on value present in GpioSel1 to GpioSel6 and AlternatFunction
          * register. This is the array of 7 configuration settings.
          * One has to compile time decide these settings. Below is the
-         * explaination of these setting
+         * explanation of these setting
          * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO
          * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO
          * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0fefb34c11e..16647b25537 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -58,7 +58,7 @@
 #define U8500_GPIO2_BASE        (U8500_PER2_BASE + 0xE000)
 #define U8500_GPIO3_BASE        (U8500_PER5_BASE + 0x1E000)
 
-/* per7 base addressess */
+/* per7 base addresses */
 #define U8500_CR_BASE_ED        (U8500_PER7_BASE_ED + 0x8000)
 #define U8500_MTU0_BASE_ED      (U8500_PER7_BASE_ED + 0xa000)
 #define U8500_MTU1_BASE_ED      (U8500_PER7_BASE_ED + 0xb000)
@@ -68,7 +68,7 @@
 #define U8500_UART0_BASE        (U8500_PER1_BASE + 0x0000)
 #define U8500_UART1_BASE        (U8500_PER1_BASE + 0x1000)
 
-/* per6 base addressess */
+/* per6 base addresses */
 #define U8500_RNG_BASE          (U8500_PER6_BASE + 0x0000)
 #define U8500_PKA_BASE          (U8500_PER6_BASE + 0x1000)
 #define U8500_PKAM_BASE         (U8500_PER6_BASE + 0x2000)
@@ -79,11 +79,11 @@
 #define U8500_CRYPTO1_BASE      (U8500_PER6_BASE + 0xb000)
 #define U8500_CLKRST6_BASE      (U8500_PER6_BASE + 0xf000)
 
-/* per5 base addressess */
+/* per5 base addresses */
 #define U8500_USBOTG_BASE       (U8500_PER5_BASE + 0x00000)
 #define U8500_CLKRST5_BASE      (U8500_PER5_BASE + 0x1f000)
 
-/* per4 base addressess */
+/* per4 base addresses */
 #define U8500_BACKUPRAM0_BASE   (U8500_PER4_BASE + 0x00000)
 #define U8500_BACKUPRAM1_BASE   (U8500_PER4_BASE + 0x01000)
 #define U8500_RTT0_BASE         (U8500_PER4_BASE + 0x02000)
@@ -106,7 +106,7 @@
 #define U8500_SDI5_BASE         (U8500_PER3_BASE + 0x8000)
 #define U8500_CLKRST3_BASE      (U8500_PER3_BASE + 0xf000)
 
-/* per2 base addressess */
+/* per2 base addresses */
 #define U8500_I2C3_BASE         (U8500_PER2_BASE + 0x0000)
 #define U8500_SPI2_BASE         (U8500_PER2_BASE + 0x1000)
 #define U8500_SPI1_BASE         (U8500_PER2_BASE + 0x2000)
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index d3644db467b..f40c69656d8 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -32,7 +32,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  *
  *  Size  Clean (ticks) Dirty (ticks)
  *   4096   21  20  21    53  55  54
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 49c2b66cf3d..a7b276dbda1 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -34,7 +34,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  *
  * *** This needs benchmarking
  */
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 6136e68ce95..dc18d81ef8c 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -96,7 +96,7 @@ ENDPROC(v7_flush_dcache_all)
  *      Flush the entire cache system.
  *  The data cache flush is now achieved using atomic clean / invalidates
  *  working outwards from L1 cache. This is done using Set/Way based cache
- *  maintainance instructions.
+ *  maintenance instructions.
  *  The instruction cache can still be invalidated back to the point of
  *  unification in a single instruction.
  *
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index afe209e1e1f..74be05f3e03 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -7,6 +7,7 @@
 #include <linux/shm.h>
 #include <linux/sched.h>
 #include <linux/io.h>
+#include <linux/personality.h>
 #include <linux/random.h>
 #include <asm/cputype.h>
 #include <asm/system.h>
@@ -82,7 +83,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
                 mm->cached_hole_size = 0;
         }
         /* 8 bits of randomness in 20 address space bits */
-        if (current->flags & PF_RANDOMIZE)
+        if ((current->flags & PF_RANDOMIZE) &&
+            !(current->personality & ADDR_NO_RANDOMIZE))
                 addr += (get_random_int() % (1 << 8)) << PAGE_SHIFT;
 
 full_search:
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 226e3d8351c..6c4e7fd6c8a 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -64,7 +64,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    32768
 
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 86d9c2cf0bc..4ce947c1962 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -64,7 +64,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    32768
 
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 83d3dd34f84..c8884c5413a 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    32768
 
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 686043ee728..413684660aa 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    32768
 
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 665266da143..7a06e5964f5 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -63,7 +63,7 @@ ENTRY(cpu_arm720_proc_fin)
 /*
  * Function: arm720_proc_do_idle(void)
  * Params  : r0 = unused
- * Purpose : put the processer in proper idle mode
+ * Purpose : put the processor in proper idle mode
  */
 ENTRY(cpu_arm720_do_idle)
                 mov     pc, lr
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 219980ec8b6..bf8a1d1cccb 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -53,7 +53,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    65536
 
@@ -390,7 +390,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl  cpu_arm920_suspend_size
 .equ    cpu_arm920_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
         stmfd   sp!, {r4 - r7, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ PID
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 36154b1e792..95ba1fc56e4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -54,7 +54,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.  (I think this should
+ * cache line maintenance instructions.  (I think this should
  * be 32768).
  */
 #define CACHE_DLIMIT    8192
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 89c5e0009c4..541e4774eea 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -77,7 +77,7 @@
 /*
  * This is the size at which it becomes more efficient to
  * clean the whole cache, rather than using the individual
- * cache line maintainence instructions.
+ * cache line maintenance instructions.
  */
 #define CACHE_DLIMIT    8192
 
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 6a4bdb2c94a..0ed85d930c0 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -404,7 +404,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl  cpu_arm926_suspend_size
 .equ    cpu_arm926_suspend_size, 4 * 3
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
         stmfd   sp!, {r4 - r7, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ PID
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index e32fa499194..34261f9486b 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -85,7 +85,7 @@
 
 /*
  * Sanity check the PTE configuration for the code below - which makes
- * certain assumptions about how these bits are layed out.
+ * certain assumptions about how these bits are laid out.
  */
 #ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 74483d1977f..184a9c997e3 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -171,7 +171,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
 
 .globl  cpu_sa1100_suspend_size
 .equ    cpu_sa1100_suspend_size, 4*4
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_sa1100_do_suspend)
         stmfd   sp!, {r4 - r7, lr}
         mrc     p15, 0, r4, c3, c0, 0           @ domain ID
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 832b6bdc192..7c99cb4c8e4 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -124,7 +124,7 @@ ENTRY(cpu_v6_set_pte_ext)
 /* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
 .globl  cpu_v6_suspend_size
 .equ    cpu_v6_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v6_do_suspend)
         stmfd   sp!, {r4 - r11, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
@@ -132,7 +132,7 @@ ENTRY(cpu_v6_do_suspend)
         mrc     p15, 0, r6, c3, c0, 0   @ Domain ID
         mrc     p15, 0, r7, c2, c0, 0   @ Translation table base 0
         mrc     p15, 0, r8, c2, c0, 1   @ Translation table base 1
-        mrc     p15, 0, r9, c1, c0, 1   @ auxillary control register
+        mrc     p15, 0, r9, c1, c0, 1   @ auxiliary control register
         mrc     p15, 0, r10, c1, c0, 2  @ co-processor access control
         mrc     p15, 0, r11, c1, c0, 0  @ control register
         stmia   r0, {r4 - r11}
@@ -151,7 +151,7 @@ ENTRY(cpu_v6_do_resume)
         mcr     p15, 0, r6, c3, c0, 0   @ Domain ID
         mcr     p15, 0, r7, c2, c0, 0   @ Translation table base 0
         mcr     p15, 0, r8, c2, c0, 1   @ Translation table base 1
-        mcr     p15, 0, r9, c1, c0, 1   @ auxillary control register
+        mcr     p15, 0, r9, c1, c0, 1   @ auxiliary control register
         mcr     p15, 0, r10, c1, c0, 2  @ co-processor access control
         mcr     p15, 0, ip, c2, c0, 2   @ TTB control register
         mcr     p15, 0, ip, c7, c5, 4   @ ISB
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 262fa88a743..babfba09c89 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -211,7 +211,7 @@ cpu_v7_name:
 /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
 .globl  cpu_v7_suspend_size
 .equ    cpu_v7_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_v7_do_suspend)
         stmfd   sp!, {r4 - r11, lr}
         mrc     p15, 0, r4, c13, c0, 0  @ FCSE/PID
@@ -237,7 +237,7 @@ ENTRY(cpu_v7_do_resume)
         mcr     p15, 0, r7, c2, c0, 0   @ TTB 0
         mcr     p15, 0, r8, c2, c0, 1   @ TTB 1
         mcr     p15, 0, ip, c2, c0, 2   @ TTB control register
-        mcr     p15, 0, r10, c1, c0, 1  @ Auxillary control register
+        mcr     p15, 0, r10, c1, c0, 1  @ Auxiliary control register
         mcr     p15, 0, r11, c1, c0, 2  @ Co-processor access control
         ldr     r4, =PRRR               @ PRRR
         ldr     r5, =NMRR               @ NMRR
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 63d8b2044e8..596213699f3 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -417,7 +417,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 
 .globl  cpu_xsc3_suspend_size
 .equ    cpu_xsc3_suspend_size, 4 * 8
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
         stmfd   sp!, {r4 - r10, lr}
         mrc     p14, 0, r4, c6, c0, 0   @ clock configuration, for turbo mode
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 086038cd86a..ce233bcbf50 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -518,7 +518,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 
 .globl  cpu_xscale_suspend_size
 .equ    cpu_xscale_suspend_size, 4 * 7
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xscale_do_suspend)
         stmfd   sp!, {r4 - r10, lr}
         mrc     p14, 0, r4, c6, c0, 0   @ clock configuration, for turbo mode
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index ce81481becf..4268a2bdf14 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -13,7 +13,7 @@
 
 /*
  * A driver for the Freescale Semiconductor i.MXC CPUfreq module.
- * The CPUFREQ driver is for controling CPU frequency. It allows you to change
+ * The CPUFREQ driver is for controlling CPU frequency. It allows you to change
  * the CPU clock speed on the fly.
  */
 
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index bd9bb979914..2e49e71b1b9 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -33,9 +33,9 @@
         .macro  arch_ret_to_user, tmp1, tmp2
         .endm
 
-        @ this macro checks which interrupt occured
+        @ this macro checks which interrupt occurred
         @ and returns its number in irqnr
-        @ and returns if an interrupt occured in irqstat
+        @ and returns if an interrupt occurred in irqstat
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 #ifndef CONFIG_MXC_TZIC
         @ Load offset & priority of the highest priority
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 04c0d060d81..6bb96ef1600 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -24,7 +24,7 @@
 
 struct mxc_nand_platform_data {
         unsigned int width;     /* data bus width in bytes */
-        unsigned int hw_ecc:1;  /* 0 if supress hardware ECC */
+        unsigned int hw_ecc:1;  /* 0 if suppress hardware ECC */
         unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
         struct mtd_partition *parts;    /* partition table */
         int nr_parts;                   /* size of parts */
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 7d9f815cede..ea28f98d5d6 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -280,7 +280,7 @@ EXPORT_SYMBOL(omap_dsp_get_mempool_base);
  * Claiming GPIOs, and setting their direction and initial values, is the
  * responsibility of the device drivers.  So is responding to probe().
  *
- * Board-specific knowlege like creating devices or pin setup is to be
+ * Board-specific knowledge like creating devices or pin setup is to be
  * kept out of drivers as much as possible.  In particular, pin setup
  * may be handled by the boot loader, and drivers should expect it will
  * normally have been done by the time they're probed.
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 2ec3b5d9f21..c22217c2ee5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1019,7 +1019,7 @@ EXPORT_SYMBOL(omap_set_dma_callback);
  * If the channel is running the caller must disable interrupts prior calling
  * this function and process the returned value before re-enabling interrupt to
  * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CSSA_L register overflow inbetween the two reads resulting
+ * is a chance for CSSA_L register overflow between the two reads resulting
  * in incorrect return value.
  */
 dma_addr_t omap_get_dma_src_pos(int lch)
@@ -1046,7 +1046,7 @@ EXPORT_SYMBOL(omap_get_dma_src_pos);
  * If the channel is running the caller must disable interrupts prior calling
  * this function and process the returned value before re-enabling interrupt to
  * prevent races with the interrupt handler. Note that in continuous mode there
- * is a chance for CDSA_L register overflow inbetween the two reads resulting
+ * is a chance for CDSA_L register overflow between the two reads resulting
  * in incorrect return value.
  */
 dma_addr_t omap_get_dma_dst_pos(int lch)
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index d6f9fa0f62a..cac2e8ac696 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -93,7 +93,7 @@ extern void omap_gpio_restore_context(void);
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
  * which lets us plug in FPGA, I2C, and other implementations.
  * *
- * The original OMAP-specfic calls should eventually be removed.
+ * The original OMAP-specific calls should eventually be removed.
  */
 
 #include <linux/errno.h>
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 12b31616503..1527929b445 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -90,7 +90,7 @@ enum omap_ecc {
                 /* 1-bit ecc: stored at end of spare area */
         OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
         OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-                /* 1-bit ecc: stored at begining of spare area as romcode */
+                /* 1-bit ecc: stored at beginning of spare area as romcode */
         OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
 };
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index d598d9fd65a..5587acf0eb2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1103,7 +1103,7 @@ int omap_mcbsp_pollread(unsigned int id, u16 *buf)
                 /* resend */
                 return -1;
         } else {
-                /* wait for recieve confirmation */
+                /* wait for receive confirmation */
                 int attemps = 0;
                 while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) {
                         if (attemps++ > 1000) {
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 75f65647124..89e68e07b0a 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -434,7 +434,7 @@ typedef unsigned long mfp_cfg_t;
  *
  * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
  * represents a range of MFP pins from "start" to "end", with the offset
- * begining at "offset", to define a single pin, let "end" = -1.
+ * beginning at "offset", to define a single pin, let "end" = -1.
  *
  * use
  *
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c2064c30871..0291bd6e236 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_CPU_FREQ_S3C24XX)  += cpu-freq.o
 obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
-# Architecture dependant builds
+# Architecture dependent builds
 
 obj-$(CONFIG_PM_SIMTEC)         += pm-simtec.o
 obj-$(CONFIG_PM)                += pm.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index eea75ff81d1..b3d3d027899 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -455,7 +455,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
 
         /* whilst we will be called later on, we try and re-set the
          * cpu frequencies as soon as possible so that we do not end
-         * up resuming devices and then immediatley having to re-set
+         * up resuming devices and then immediately having to re-set
          * a number of settings once these devices have restarted.
          *
          * as a note, it is expected devices are not used until they
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 6ad274e7593..27ea852e337 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -557,7 +557,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
                 break;
 
         case S3C2410_DMALOAD_1LOADED_1RUNNING:
-                /* I belive in this case we do not have anything to do
+                /* I believe in this case we do not have anything to do
                  * until the next buffer comes along, and we turn off the
                  * reload */
                 return;
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 46dd078147d..cd6d67c8382 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -208,7 +208,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
         }
 
         /*
-         * chained GPIO irq has been sucessfully registered, allocate new gpio
+         * chained GPIO irq has been successfully registered, allocate new gpio
          * int group and assign irq nubmers
          */
 
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 9a82b887491..983c578b827 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -21,7 +21,7 @@ struct clk;
  * @set_parent: set the clock's parent, see clk_set_parent().
  *
  * Group the common clock implementations together so that we
- * don't have to keep setting the same fiels again. We leave
+ * don't have to keep setting the same fields again. We leave
  * enable in struct clk.
  *
  * Adding an extra layer of indirection into the process should
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 5603db0b79b..3ad8386599c 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -114,7 +114,7 @@ extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip,
  * of control per GPIO, generally in the form of:
  *      0000 = Input
  *      0001 = Output
- *      others = Special functions (dependant on bank)
+ *      others = Special functions (dependent on bank)
  *
  * Note, since the code to deal with the case where there are two control
  * registers instead of one, we do not have a separate set of functions for
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 5e04fa6eda7..1762dcb4cb9 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -125,7 +125,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  *
  * These values control the state of the weak pull-{up,down} resistors
  * available on most pins on the S3C series. Not all chips support both
- * up or down settings, and it may be dependant on the chip that is being
+ * up or down settings, and it may be dependent on the chip that is being
  * used to whether the particular mode is available.
  */
 #define S3C_GPIO_PULL_NONE      ((__force s3c_gpio_pull_t)0x00)
@@ -138,7 +138,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
  * @pull: The configuration for the pull resistor.
  *
  * This function sets the state of the pull-{up,down} resistor for the
- * specified pin. It will return 0 if successfull, or a negative error
+ * specified pin. It will return 0 if successful, or a negative error
  * code if the pin cannot support the requested pull setting.
  *
  * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP.
@@ -202,7 +202,7 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
  * @drvstr: The new value of the driver strength
  *
  * This function sets the driver strength value for the specified pin.
- * It will return 0 if successfull, or a negative error code if the pin
+ * It will return 0 if successful, or a negative error code if the pin
  * cannot support the requested setting.
 */
 extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index dac35d0a711..8cad4cf19c3 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -108,7 +108,7 @@ extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);
  * of control per GPIO, generally in the form of:
  * 0000 = Input
  * 0001 = Output
- * others = Special functions (dependant on bank)
+ * others = Special functions (dependent on bank)
  *
  * Note, since the code to deal with the case where there are two control
  * registers instead of one, we do not have a separate set of function
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index b0bdf16549d..058e09654fe 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -57,7 +57,7 @@ enum clk_types {
  * @cfg_gpio: Configure the GPIO for a specific card bit-width
  * @cfg_card: Configure the interface for a specific card and speed. This
  *            is necessary the controllers and/or GPIO blocks require the
- *            changing of driver-strength and other controls dependant on
+ *            changing of driver-strength and other controls dependent on
  *            the card and speed of operation.
  *
  * Initialisation data specific to either the machine or the platform
@@ -108,7 +108,7 @@ extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc3_def_platdata;
 
-/* Helper function availablity */
+/* Helper function availability */
 
 extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c
index b4ff8d74ac4..f85638c6f5a 100644
--- a/arch/arm/plat-samsung/s3c-pl330.c
+++ b/arch/arm/plat-samsung/s3c-pl330.c
@@ -68,7 +68,7 @@ struct s3c_pl330_xfer {
  * @req: Two requests to communicate with the PL330 engine.
  * @callback_fn: Callback function to the client.
  * @rqcfg: Channel configuration for the xfers.
- * @xfer_head: Pointer to the xfer to be next excecuted.
+ * @xfer_head: Pointer to the xfer to be next executed.
  * @dmac: Pointer to the DMAC that manages this channel, NULL if the
  *      channel is available to be acquired.
  * @client: Client of this channel. NULL if the
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 2ae6606930a..fcc0d0ad4a1 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -89,7 +89,7 @@ struct rate_config {
  * @sibling: node for list of clocks having same parents
  * @private_data: clock specific private data
  * @node: list to maintain clocks linearly
- * @cl: clocklook up assoicated with this clock
+ * @cl: clocklook up associated with this clock
  * @dent: object for debugfs
  */
 struct clk {
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index bbf3da012af..f74695075e6 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -78,6 +78,14 @@ static void vfp_thread_exit(struct thread_info *thread)
         put_cpu();
 }
 
+static void vfp_thread_copy(struct thread_info *thread)
+{
+        struct thread_info *parent = current_thread_info();
+
+        vfp_sync_hwstate(parent);
+        thread->vfpstate = parent->vfpstate;
+}
+
 /*
  * When this function is called with the following 'cmd's, the following
  * is true while this function is being run:
@@ -104,12 +112,17 @@ static void vfp_thread_exit(struct thread_info *thread)
 static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
         struct thread_info *thread = v;
+        u32 fpexc;
+#ifdef CONFIG_SMP
+        unsigned int cpu;
+#endif
 
-        if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
-                u32 fpexc = fmrx(FPEXC);
+        switch (cmd) {
+        case THREAD_NOTIFY_SWITCH:
+                fpexc = fmrx(FPEXC);
 
 #ifdef CONFIG_SMP
-                unsigned int cpu = thread->cpu;
+                cpu = thread->cpu;
 
                 /*
                  * On SMP, if VFP is enabled, save the old state in
@@ -134,13 +147,20 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
                  * old state.
                  */
                 fmxr(FPEXC, fpexc & ~FPEXC_EN);
-                return NOTIFY_DONE;
-        }
+                break;
 
-        if (cmd == THREAD_NOTIFY_FLUSH)
+        case THREAD_NOTIFY_FLUSH:
                 vfp_thread_flush(thread);
-        else
+                break;
+
+        case THREAD_NOTIFY_EXIT:
                 vfp_thread_exit(thread);
+                break;
+
+        case THREAD_NOTIFY_COPY:
+                vfp_thread_copy(thread);
+                break;
+        }
 
         return NOTIFY_DONE;
 }