198 files changed, 812 insertions, 2867 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dfb0312f4e7..87693e63112 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -186,6 +186,9 @@ config GENERIC_ISA_DMA
 config FIQ
         bool
 
+config NEED_RET_TO_USER
+        bool
+
 config ARCH_MTD_XIP
         bool
 
@@ -479,6 +482,7 @@ config ARCH_IOP13XX
         select ARCH_SUPPORTS_MSI
         select VMSPLIT_1G
         select NEED_MACH_MEMORY_H
+        select NEED_RET_TO_USER
         help
           Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -486,6 +490,7 @@ config ARCH_IOP32X
         bool "IOP32x-based"
         depends on MMU
         select CPU_XSCALE
+        select NEED_RET_TO_USER
         select PLAT_IOP
         select PCI
         select ARCH_REQUIRE_GPIOLIB
@@ -497,6 +502,7 @@ config ARCH_IOP33X
         bool "IOP33x-based"
         depends on MMU
         select CPU_XSCALE
+        select NEED_RET_TO_USER
         select PLAT_IOP
         select PCI
         select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d7ff7..03646c4c13d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,25 +81,6 @@ choice
         prompt "Kernel low-level debugging port"
         depends on DEBUG_LL
 
-        config DEBUG_LL_UART_NONE
-                bool "No low-level debugging UART"
-                help
-                  Say Y here if your platform doesn't provide a UART option
-                  below. This relies on your platform choosing the right UART
-                  definition internally in order for low-level debugging to
-                  work.
-
-        config DEBUG_ICEDCC
-                bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-                help
-                  Say Y here if you want the debug print routines to direct
-                  their output to the EmbeddedICE macrocell's DCC channel using
-                  co-processor 14. This is known to work on the ARM9 style ICE
-                  channel and on the XScale with the PEEDI.
-
-                  Note that the system will appear to hang during boot if there
-                  is nothing connected to read from the DCC.
-
         config AT91_DEBUG_LL_DBGU0
                 bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
                 depends on HAVE_AT91_DBGU0
@@ -108,20 +89,6 @@ choice
                 bool "Kernel low-level debugging on 9263, 9g45 and cap9"
                 depends on HAVE_AT91_DBGU1
 
-        config DEBUG_FOOTBRIDGE_COM1
-                bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-                depends on FOOTBRIDGE
-                help
-                  Say Y here if you want the debug print routines to direct
-                  their output to the 8250 at PCI COM1.
-
-        config DEBUG_DC21285_PORT
-                bool "Kernel low-level debugging messages via footbridge serial port"
-                depends on FOOTBRIDGE
-                help
-                  Say Y here if you want the debug print routines to direct
-                  their output to the serial port in the DC21285 (Footbridge).
-
         config DEBUG_CLPS711X_UART1
                 bool "Kernel low-level debugging messages via UART1"
                 depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@ choice
                   Say Y here if you want the debug print routines to direct
                   their output to the second serial port on these devices.
 
+        config DEBUG_DC21285_PORT
+                bool "Kernel low-level debugging messages via footbridge serial port"
+                depends on FOOTBRIDGE
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the serial port in the DC21285 (Footbridge).
+
+        config DEBUG_FOOTBRIDGE_COM1
+                bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+                depends on FOOTBRIDGE
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the 8250 at PCI COM1.
+
         config DEBUG_HIGHBANK_UART
                 bool "Kernel low-level debugging messages via Highbank UART"
                 depends on ARCH_HIGHBANK
@@ -206,38 +187,42 @@ choice
                   Say Y here if you want kernel low-level debugging support
                   on i.MX6Q.
 
-        config DEBUG_S3C_UART0
-                depends on PLAT_SAMSUNG
-                bool "Use S3C UART 0 for low-level debug"
+        config DEBUG_MSM_UART1
+                bool "Kernel low-level debugging messages via MSM UART1"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to UART 0. The port must have been initialised
-                  by the boot-loader before use.
-
-                  The uncompressor code port configuration is now handled
-                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+                  their output to the first serial port on MSM devices.
 
-        config DEBUG_S3C_UART1
-                depends on PLAT_SAMSUNG
-                bool "Use S3C UART 1 for low-level debug"
+        config DEBUG_MSM_UART2
+                bool "Kernel low-level debugging messages via MSM UART2"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to UART 1. The port must have been initialised
-                  by the boot-loader before use.
+                  their output to the second serial port on MSM devices.
 
-                  The uncompressor code port configuration is now handled
-                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+        config DEBUG_MSM_UART3
+                bool "Kernel low-level debugging messages via MSM UART3"
+                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the third serial port on MSM devices.
 
-        config DEBUG_S3C_UART2
-                depends on PLAT_SAMSUNG
-                bool "Use S3C UART 2 for low-level debug"
+        config DEBUG_MSM8660_UART
+                bool "Kernel low-level debugging messages via MSM 8660 UART"
+                depends on ARCH_MSM8X60
+                select MSM_HAS_DEBUG_UART_HS
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to UART 2. The port must have been initialised
-                  by the boot-loader before use.
+                  their output to the serial port on MSM 8660 devices.
 
-                  The uncompressor code port configuration is now handled
-                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+        config DEBUG_MSM8960_UART
+                bool "Kernel low-level debugging messages via MSM 8960 UART"
+                depends on ARCH_MSM8960
+                select MSM_HAS_DEBUG_UART_HS
+                help
+                  Say Y here if you want the debug print routines to direct
+                  their output to the serial port on MSM 8960 devices.
 
         config DEBUG_REALVIEW_STD_PORT
                 bool "RealView Default UART"
@@ -255,42 +240,57 @@ choice
                   their output to the standard serial port on the RealView
                   PB1176 platform.
 
-        config DEBUG_MSM_UART1
-                bool "Kernel low-level debugging messages via MSM UART1"
-                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+        config DEBUG_S3C_UART0
+                depends on PLAT_SAMSUNG
+                bool "Use S3C UART 0 for low-level debug"
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to the first serial port on MSM devices.
+                  their output to UART 0. The port must have been initialised
+                  by the boot-loader before use.
 
-        config DEBUG_MSM_UART2
-                bool "Kernel low-level debugging messages via MSM UART2"
-                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                  The uncompressor code port configuration is now handled
+                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+        config DEBUG_S3C_UART1
+                depends on PLAT_SAMSUNG
+                bool "Use S3C UART 1 for low-level debug"
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to the second serial port on MSM devices.
+                  their output to UART 1. The port must have been initialised
+                  by the boot-loader before use.
 
-        config DEBUG_MSM_UART3
-                bool "Kernel low-level debugging messages via MSM UART3"
-                depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+                  The uncompressor code port configuration is now handled
+                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+        config DEBUG_S3C_UART2
+                depends on PLAT_SAMSUNG
+                bool "Use S3C UART 2 for low-level debug"
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to the third serial port on MSM devices.
+                  their output to UART 2. The port must have been initialised
+                  by the boot-loader before use.
 
-        config DEBUG_MSM8660_UART
-                bool "Kernel low-level debugging messages via MSM 8660 UART"
-                depends on ARCH_MSM8X60
-                select MSM_HAS_DEBUG_UART_HS
+                  The uncompressor code port configuration is now handled
+                  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+        config DEBUG_LL_UART_NONE
+                bool "No low-level debugging UART"
                 help
-                  Say Y here if you want the debug print routines to direct
-                  their output to the serial port on MSM 8660 devices.
+                  Say Y here if your platform doesn't provide a UART option
+                  below. This relies on your platform choosing the right UART
+                  definition internally in order for low-level debugging to
+                  work.
 
-        config DEBUG_MSM8960_UART
-                bool "Kernel low-level debugging messages via MSM 8960 UART"
-                depends on ARCH_MSM8960
-                select MSM_HAS_DEBUG_UART_HS
+        config DEBUG_ICEDCC
+                bool "Kernel low-level debugging via EmbeddedICE DCC channel"
                 help
                   Say Y here if you want the debug print routines to direct
-                  their output to the serial port on MSM 8960 devices.
+                  their output to the EmbeddedICE macrocell's DCC channel using
+                  co-processor 14. This is known to work on the ARM9 style ICE
+                  channel and on the XScale with the PEEDI.
+
+                  Note that the system will appear to hang during boot if there
+                  is nothing connected to read from the DCC.
 
 endchoice
 
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
index e0af4983723..8c215acd9b5 100644
--- a/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -11,14 +11,6 @@
 /* IOC / IOMD based hardware */
 #include <asm/hardware/iomd.h>
 
-                .macro  disable_fiq
-                mov     r12, #ioc_base_high
-                .if     ioc_base_low
-                orr     r12, r12, #ioc_base_low
-                .endif
-                strb    r12, [r12, #0x38]       @ Disable FIQ register
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldrb    \irqstat, [\base, #IOMD_IRQREQB]        @ get high priority first
                 ldr     \tmp, =irq_prio_h
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc6ec0..424aa458c48 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@ extern void cpu_init(void);
 
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
 
 #define UDBG_UNDEFINED  (1 << 0)
 #define UDBG_SYSCALL    (1 << 1)
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index be16a48007b..22f0ed324f3 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,7 +19,9 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
+#ifndef CONFIG_MULTI_IRQ_HANDLER
 #include <mach/entry-macro.S>
+#endif
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
@@ -1101,7 +1103,6 @@ __stubs_start:
  * get out of that mode without clobbering one register.
  */
 vector_fiq:
-        disable_fiq
         subs    pc, lr, #4
 
 /*=============================================================================
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 9fd0ba90c1d..54ee265dd81 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,9 +10,15 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <mach/entry-macro.S>
 #include <asm/unwind.h>
 
+#ifdef CONFIG_NEED_RET_TO_USER
+#include <mach/entry-macro.S>
+#else
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+#endif
+
 #include "entry-header.S"
 
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 219e4efee1a..d3eca452453 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
-#include <mach/system.h>
-
 void disable_hlt(void)
 {
         hlt_counter++;
@@ -181,13 +179,17 @@ void cpu_idle_wait(void)
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
- * This is our default idle handler.  We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
  */
+
+void (*arm_pm_idle)(void);
+
 static void default_idle(void)
 {
-        if (!need_resched())
-                arch_idle();
+        if (arm_pm_idle)
+                arm_pm_idle();
+        else
+                cpu_do_idle();
         local_irq_enable();
 }
 
@@ -215,6 +217,10 @@ void cpu_idle(void)
                                 cpu_die();
 #endif
 
+                        /*
+                         * We need to disable interrupts here
+                         * to ensure we don't miss a wakeup call.
+                         */
                         local_irq_disable();
 #ifdef CONFIG_PL310_ERRATA_769419
                         wmb();
@@ -222,19 +228,18 @@ void cpu_idle(void)
                         if (hlt_counter) {
                                 local_irq_enable();
                                 cpu_relax();
-                        } else {
+                        } else if (!need_resched()) {
                                 stop_critical_timings();
                                 if (cpuidle_idle_call())
                                         pm_idle();
                                 start_critical_timings();
                                 /*
-                                 * This will eventually be removed - pm_idle
-                                 * functions should always return with IRQs
-                                 * enabled.
+                                 * pm_idle functions must always
+                                 * return with IRQs enabled.
                                  */
                                 WARN_ON(irqs_disabled());
+                        } else
                                 local_irq_enable();
-                        }
                 }
                 leds_event(led_idle_end);
                 rcu_idle_exit();
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index a42edc25a87..8967d75c2ea 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -14,6 +14,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -313,6 +314,12 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
         }
 };
 
+static void at91cap9_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -332,6 +339,7 @@ static void __init at91cap9_ioremap_registers(void)
 
 static void __init at91cap9_initialize(void)
 {
+        arm_pm_idle = at91cap9_idle;
         arm_pm_restart = at91sam9g45_restart;
         at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174e24a..dd6e2de1342 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,6 +289,15 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
         }
 };
 
+static void at91rm9200_idle(void)
+{
+        /*
+         * Disable the processor clock.  The processor will be automatically
+         * re-enabled by an interrupt or by a reset.
+         */
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
 static void at91rm9200_restart(char mode, const char *cmd)
 {
         /*
@@ -314,6 +323,7 @@ static void __init at91rm9200_ioremap_registers(void)
 
 static void __init at91rm9200_initialize(void)
 {
+        arm_pm_idle = at91rm9200_idle;
         arm_pm_restart = at91rm9200_restart;
         at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
                         | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba4361..9ac8c6fe336 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -328,8 +329,15 @@ static void __init at91sam9260_ioremap_registers(void)
         at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }
 
+static void at91sam9260_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 static void __init at91sam9260_initialize(void)
 {
+        arm_pm_idle = at91sam9260_idle;
         arm_pm_restart = at91sam9_alt_restart;
         at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
                         | (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff138d..ab76868f01f 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -286,8 +287,15 @@ static void __init at91sam9261_ioremap_registers(void)
         at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }
 
+static void at91sam9261_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 static void __init at91sam9261_initialize(void)
 {
+        arm_pm_idle = at91sam9261_idle;
         arm_pm_restart = at91sam9_alt_restart;
         at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
                         | (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c258a..247ab633abc 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -307,8 +308,15 @@ static void __init at91sam9263_ioremap_registers(void)
         at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
 }
 
+static void at91sam9263_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 static void __init at91sam9263_initialize(void)
 {
+        arm_pm_idle = at91sam9263_idle;
         arm_pm_restart = at91sam9_alt_restart;
         at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96b1c1..5b12192e52e 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,6 +317,12 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
         }
 };
 
+static void at91sam9g45_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 /* --------------------------------------------------------------------
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
@@ -337,6 +343,7 @@ static void __init at91sam9g45_ioremap_registers(void)
 
 static void __init at91sam9g45_initialize(void)
 {
+        arm_pm_idle = at91sam9g45_idle;
         arm_pm_restart = at91sam9g45_restart;
         at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a841cb..fd60e226a98 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -291,8 +292,15 @@ static void __init at91sam9rl_ioremap_registers(void)
         at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }
 
+static void at91sam9rl_idle(void)
+{
+        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+        cpu_do_idle();
+}
+
 static void __init at91sam9rl_initialize(void)
 {
+        arm_pm_idle = at91sam9rl_idle;
         arm_pm_restart = at91sam9_alt_restart;
         at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd035a..0154b7f44ff 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
 #include <mach/at91_st.h>
@@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk)
         return AT91X40_MASTER_CLOCK;
 }
 
+static void at91x40_idle(void)
+{
+        /*
+         * Disable the processor clock.  The processor will be automatically
+         * re-enabled by an interrupt or by a reset.
+         */
+        at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+        cpu_do_idle();
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
+        arm_pm_idle = at91x40_idle;
         at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
                         | (1 << AT91X40_ID_IRQ2);
 }
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 423eea0ed74..903bf205a33 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -13,17 +13,11 @@
 #include <mach/hardware.h>
 #include <mach/at91_aic.h>
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =at91_aic_base           @ base virtual address of AIC peripheral
         ldr     \base, [\base]
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         ldr     \irqnr, [\base, #AT91_AIC_IVR]          @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
         ldr     \irqstat, [\base, #AT91_AIC_ISR]        @ read interrupt source number
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3bcec..00000000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
-        /*
-         * Disable the processor clock.  The processor will be automatically
-         * re-enabled by an interrupt or by a reset.
-         */
-#ifdef AT91_PS
-        at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
-        at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
-        /*
-         * Set the processor (CP15) into 'Wait for Interrupt' mode.
-         * Post-RM9200 processors need this in conjunction with the above
-         * to save power when idle.
-         */
-        cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e8426..22e4e0a28ad 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-#define AMBA_DEVICE(name, initname, base, plat, size)       \
-static struct amba_device name##_device = {     \
-   .dev = {                                     \
-      .coherent_dma_mask = ~0,                  \
-      .init_name = initname,                    \
-      .platform_data = plat                     \
-   },                                           \
-   .res = {                                     \
-      .start = MM_ADDR_IO_##base,               \
-                .end = MM_ADDR_IO_##base + (size) - 1,    \
-      .flags = IORESOURCE_MEM                   \
-   },                                           \
-   .dma_mask = ~0,                              \
-   .irq = {                                     \
-      IRQ_##base                                \
-   }                                            \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
 
 static struct clk pll1_clk = {
         .name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
index 94c950d783b..2f316f0e6e6 100644
--- a/arch/arm/mach-bcmring/include/mach/entry-macro.S
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -21,9 +21,6 @@
 #include <mach/hardware.h>
 #include <mach/csp/mm_io.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \base, =(MM_IO_BASE_INTC0)
                 ldr     \irqstat, [\base, #0]           @ get status
@@ -77,6 +74,3 @@
 
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250db64..00000000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b9b4d..8736c1acc16 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd)
 {
         soft_restart(0);
 }
+
+static void clps711x_idle(void)
+{
+        clps_writel(1, HALT);
+        __asm__ __volatile__(
+        "mov    r0, r0\n\
+        mov     r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+        arm_pm_idle = clps711x_idle;
+        return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
index 90fa2f70489..125af59d7a2 100644
--- a/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -10,15 +10,9 @@
 #include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
 #if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
 #error INTSR stride != INTMR stride
 #endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8c84d..00000000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
-        clps_writel(1, HALT);
-        __asm__ __volatile__(
-        "mov    r0, r0\n\
-        mov     r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
deleted file mode 100644
index 01c57df5f71..00000000000
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Low-level IRQ helper macros for Cavium Networks platforms
- *
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7dc133..00000000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index e14c0dc0e12..c1661d2feca 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -11,17 +11,11 @@
 #include <mach/io.h>
 #include <mach/irqs.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 ldr \base, =davinci_intc_base
                 ldr \base, [\base]
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 #if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
                 ldr \tmp, =davinci_intc_type
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a015aba..00000000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
index e84c78c2a8b..72d622baaad 100644
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =IRQ_VIRT_BASE
         .endm
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954f616..00000000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad07f7a..804c9122b7b 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = {
         &am79c961_device,
 };
 
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+        const char *irq_stat = (char *)0xff000000;
+
+        /* disable clock switching */
+        asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+        /* wait for an interrupt to occur */
+        while (!*irq_stat);
+
+        /* enable clock switching */
+        asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
 static int __init ebsa110_init(void)
 {
+        arm_pm_idle = ebsa110_idle;
         return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
index cc3e5992f6b..14b110de78a 100644
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -12,16 +12,10 @@
 
 #define IRQ_STAT                0xff000000      /* read */
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         mov     \base, #IRQ_STAT
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, stat, base, tmp
         ldrb    \stat, [\base]                  @ get interrupts
         mov     \irqnr, #0
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65edb6..00000000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-        const char *irq_stat = (char *)0xff000000;
-
-        /* disable clock switching */
-        asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-        /* wait for an interrupt to occur */
-        while (!*irq_stat);
-
-        /* enable clock switching */
-        asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b5c1dae8327..41f0d680c5e 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = {
         .set_mctrl      = ep93xx_uart_set_mctrl,
 };
 
-static struct amba_device uart1_device = {
-        .dev            = {
-                .init_name      = "apb:uart1",
-                .platform_data  = &ep93xx_uart_data,
-        },
-        .res            = {
-                .start  = EP93XX_UART1_PHYS_BASE,
-                .end    = EP93XX_UART1_PHYS_BASE + 0x0fff,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_EP93XX_UART1, NO_IRQ },
-        .periphid       = 0x00041010,
-};
-
-static struct amba_device uart2_device = {
-        .dev            = {
-                .init_name      = "apb:uart2",
-                .platform_data  = &ep93xx_uart_data,
-        },
-        .res            = {
-                .start  = EP93XX_UART2_PHYS_BASE,
-                .end    = EP93XX_UART2_PHYS_BASE + 0x0fff,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_EP93XX_UART2, NO_IRQ },
-        .periphid       = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+        { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
-static struct amba_device uart3_device = {
-        .dev            = {
-                .init_name      = "apb:uart3",
-                .platform_data  = &ep93xx_uart_data,
-        },
-        .res            = {
-                .start  = EP93XX_UART3_PHYS_BASE,
-                .end    = EP93XX_UART3_PHYS_BASE + 0x0fff,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_EP93XX_UART3, NO_IRQ },
-        .periphid       = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+        { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
 
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+        { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 
 static struct resource ep93xx_rtc_resource[] = {
         {
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
deleted file mode 100644
index 9be6edcf904..00000000000
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7cb9b5..00000000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 6de298c5d2d..93fa2d532e4 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
         },
 };
 
-static void exynos_idle(void)
-{
-        if (!need_resched())
-                cpu_do_idle();
-
-        local_irq_enable();
-}
-
 void exynos4_restart(char mode, const char *cmd)
 {
         __raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init);
 int __init exynos_init(void)
 {
         printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-        /* set idle function */
-        pm_idle = exynos_idle;
-
         return device_register(&exynos4_dev);
 }
 
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd270f0..91370def4a7 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = {
         .peri_id = pdma0_peri,
 };
 
-struct amba_device exynos4_device_pdma0 = {
-        .dev = {
-                .init_name = "dma-pl330.0",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &exynos4_pdma0_pdata,
-        },
-        .res = {
-                .start = EXYNOS4_PA_PDMA0,
-                .end = EXYNOS4_PA_PDMA0 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA0, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+        {IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
 u8 pdma1_peri[] = {
         DMACH_PCM0_RX,
@@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = {
         .peri_id = pdma1_peri,
 };
 
-struct amba_device exynos4_device_pdma1 = {
-        .dev = {
-                .init_name = "dma-pl330.1",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &exynos4_pdma1_pdata,
-        },
-        .res = {
-                .start = EXYNOS4_PA_PDMA1,
-                .end = EXYNOS4_PA_PDMA1 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA1, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+        {IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
 static int __init exynos4_dma_init(void)
 {
@@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void)
 
         dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-        amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+        amba_device_register(&exynos4_pdma0_device, &iomem_resource);
 
         dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-        amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+        amba_device_register(&exynos4_pdma1_device, &iomem_resource);
 
         return 0;
 }
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
deleted file mode 100644
index 3ba4f547534..00000000000
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/entry-macro.S
- *
- * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for EXYNOS4 platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6de3dc..00000000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-        /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
index d3847be0c66..dabbd5c54a7 100644
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -14,9 +14,6 @@
                 .equ    dc21285_high, ARMCSR_BASE & 0xff000000
                 .equ    dc21285_low, ARMCSR_BASE & 0x00ffffff
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 mov     \base, #dc21285_high
                 .if     dc21285_low
@@ -24,9 +21,6 @@
                 .endif
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \irqstat, [\base, #0x180]       @ get interrupts
 
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a5841bc..00000000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b95a76..7355c0bbcb5 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y                   := irq.o mm.o time.o devices.o gpio.o
+obj-y                   := irq.o mm.o time.o devices.o gpio.o idle.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_NAS4220B)     += board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 00000000000..92bbd6bb600
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+        /*
+         * Because of broken hardware we have to enable interrupts or the CPU
+         * will never wakeup... Acctualy it is not very good to enable
+         * interrupts first since scheduler can miss a tick, but there is
+         * no other way around this. Platforms that needs it for power saving
+         * should call enable_hlt() in init code, since by default it is
+         * disabled.
+         */
+        local_irq_enable();
+        cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+        arm_pm_idle = gemini_idle;
+        return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
index 1624f91a2b8..f044e430bfa 100644
--- a/arch/arm/mach-gemini/include/mach/entry-macro.S
+++ b/arch/arm/mach-gemini/include/mach/entry-macro.S
@@ -12,15 +12,9 @@
 
 #define IRQ_STATUS      0x14
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         ldr     \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
         ldr     \irqnr, [\irqstat]
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f87247..a33b5a1f8ab 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 
-static inline void arch_idle(void)
-{
-        /*
-         * Because of broken hardware we have to enable interrupts or the CPU
-         * will never wakeup... Acctualy it is not very good to enable
-         * interrupts here since scheduler can miss a tick, but there is
-         * no other way around this. Platforms that needs it for power saving
-         * should call enable_hlt() in init code, since by default it is
-         * disabled.
-         */
-        local_irq_enable();
-        cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
         __raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8fdf85..ca70e5fcc7a 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@ void __init gemini_init_irq(void)
         unsigned int i, mode = 0, level = 0;
 
         /*
-         * Disable arch_idle() by default since it is buggy
-         * For more info see arch/arm/mach-gemini/include/mach/system.h
+         * Disable the idle handler by default since it is buggy
+         * For more info see arch/arm/mach-gemini/idle.c
          */
         disable_hlt();
 
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6bb548..e756d1ac00c 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd)
 {
         CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
+
+static void h720x__idle(void)
+{
+        CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+        nop();
+        nop();
+        CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+        nop();
+        nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+        arm_pm_idle = h720x__idle;
+        return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
index c3948e5ba4a..75267fad701 100644
--- a/arch/arm/mach-h720x/include/mach/entry-macro.S
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -8,15 +8,9 @@
  * warranty of any kind, whether express or implied.
  */
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 #if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
                 @ we could use the id register on H7202, but this is not
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e239a..00000000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
-        CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-        nop();
-        nop();
-        CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-        nop();
-        nop();
-}
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
deleted file mode 100644
index a14f9e62ca9..00000000000
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ /dev/null
@@ -1,5 +0,0 @@
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
deleted file mode 100644
index b1d8b5fbe37..00000000000
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 2530c151b7b..9c9b7f9f43d 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@ static void imx3_idle(void)
 {
         unsigned long reg = 0;
 
-        if (!need_resched())
-                __asm__ __volatile__(
-                        /* disable I and D cache */
-                        "mrc p15, 0, %0, c1, c0, 0\n"
-                        "bic %0, %0, #0x00001000\n"
-                        "bic %0, %0, #0x00000004\n"
-                        "mcr p15, 0, %0, c1, c0, 0\n"
-                        /* invalidate I cache */
-                        "mov %0, #0\n"
-                        "mcr p15, 0, %0, c7, c5, 0\n"
-                        /* clear and invalidate D cache */
-                        "mov %0, #0\n"
-                        "mcr p15, 0, %0, c7, c14, 0\n"
-                        /* WFI */
-                        "mov %0, #0\n"
-                        "mcr p15, 0, %0, c7, c0, 4\n"
-                        "nop\n" "nop\n" "nop\n" "nop\n"
-                        "nop\n" "nop\n" "nop\n"
-                        /* enable I and D cache */
-                        "mrc p15, 0, %0, c1, c0, 0\n"
-                        "orr %0, %0, #0x00001000\n"
-                        "orr %0, %0, #0x00000004\n"
-                        "mcr p15, 0, %0, c1, c0, 0\n"
-                        : "=r" (reg));
-        local_irq_enable();
+        __asm__ __volatile__(
+                /* disable I and D cache */
+                "mrc p15, 0, %0, c1, c0, 0\n"
+                "bic %0, %0, #0x00001000\n"
+                "bic %0, %0, #0x00000004\n"
+                "mcr p15, 0, %0, c1, c0, 0\n"
+                /* invalidate I cache */
+                "mov %0, #0\n"
+                "mcr p15, 0, %0, c7, c5, 0\n"
+                /* clear and invalidate D cache */
+                "mov %0, #0\n"
+                "mcr p15, 0, %0, c7, c14, 0\n"
+                /* WFI */
+                "mov %0, #0\n"
+                "mcr p15, 0, %0, c7, c0, 4\n"
+                "nop\n" "nop\n" "nop\n" "nop\n"
+                "nop\n" "nop\n" "nop\n"
+                /* enable I and D cache */
+                "mrc p15, 0, %0, c1, c0, 0\n"
+                "orr %0, %0, #0x00001000\n"
+                "orr %0, %0, #0x00000004\n"
+                "mcr p15, 0, %0, c1, c0, 0\n"
+                : "=r" (reg));
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@ void __init imx31_init_early(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX31);
         mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-        pm_idle = imx3_idle;
         imx_ioremap = imx3_ioremap;
+        arm_pm_idle = imx3_idle;
 }
 
 void __init mx31_init_irq(void)
@@ -203,7 +201,7 @@ void __init imx35_init_early(void)
         mxc_set_cpu_type(MXC_CPU_MX35);
         mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
         mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-        pm_idle = imx3_idle;
+        arm_pm_idle = imx3_idle;
         imx_ioremap = imx3_ioremap;
 }
 
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 90d7880bb37..dc7c4ed8153 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk;
 
 static void imx5_idle(void)
 {
-        if (!need_resched()) {
-                /* gpc clock is needed for SRPG */
-                if (gpc_dvfs_clk == NULL) {
-                        gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-                        if (IS_ERR(gpc_dvfs_clk))
-                                goto err0;
-                }
-                clk_enable(gpc_dvfs_clk);
-                mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-                if (tzic_enable_wake())
-                        goto err1;
-                cpu_do_idle();
-err1:
-                clk_disable(gpc_dvfs_clk);
+        /* gpc clock is needed for SRPG */
+        if (gpc_dvfs_clk == NULL) {
+                gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+                if (IS_ERR(gpc_dvfs_clk))
+                        return;
         }
-err0:
-        local_irq_enable();
+        clk_enable(gpc_dvfs_clk);
+        mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+        if (tzic_enable_wake() != 0)
+                cpu_do_idle();
+        clk_disable(gpc_dvfs_clk);
 }
 
 /*
@@ -108,7 +102,7 @@ void __init imx51_init_early(void)
         mxc_set_cpu_type(MXC_CPU_MX51);
         mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
         mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-        pm_idle = imx5_idle;
+        arm_pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f855b..6fcffa7db97 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 #include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state)
                 cscr &= 0xFFFFFFFC;
                 __raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
                 /* Executes WFI */
-                arch_idle();
+                cpu_do_idle();
                 break;
 
         default:
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab08f6..15b87f26ac9 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
 
 static struct amba_pl010_data integrator_uart_data;
 
-static struct amba_device rtc_device = {
-        .dev            = {
-                .init_name = "mb:15",
-        },
-        .res            = {
-                .start  = INTEGRATOR_RTC_BASE,
-                .end    = INTEGRATOR_RTC_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ      { IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ    { IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ    { IRQ_UARTINT1 }
+#define KMI0_IRQ                { IRQ_KMIINT0 }
+#define KMI1_IRQ                { IRQ_KMIINT1 }
 
-static struct amba_device uart0_device = {
-        .dev            = {
-                .init_name = "mb:16",
-                .platform_data = &integrator_uart_data,
-        },
-        .res            = {
-                .start  = INTEGRATOR_UART0_BASE,
-                .end    = INTEGRATOR_UART0_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+        INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static struct amba_device uart1_device = {
-        .dev            = {
-                .init_name = "mb:17",
-                .platform_data = &integrator_uart_data,
-        },
-        .res            = {
-                .start  = INTEGRATOR_UART1_BASE,
-                .end    = INTEGRATOR_UART1_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+        INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi0_device = {
-        .dev            = {
-                .init_name = "mb:18",
-        },
-        .res            = {
-                .start  = KMI0_BASE,
-                .end    = KMI0_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+        INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi1_device = {
-        .dev            = {
-                .init_name = "mb:19",
-        },
-        .res            = {
-                .start  = KMI1_BASE,
-                .end    = KMI1_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
         &rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a96bd..3e538da6cb1 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev)
 
                 pc_base = dev->resource.start + idev->offset;
 
-                d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+                d = amba_device_alloc(NULL, pc_base, SZ_4K);
                 if (!d)
                         continue;
 
                 dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
                 d->dev.parent   = &dev->dev;
-                d->res.start    = dev->resource.start + idev->offset;
-                d->res.end      = d->res.start + SZ_4K - 1;
-                d->res.flags    = IORESOURCE_MEM;
                 d->irq[0]       = dev->irq;
                 d->irq[1]       = dev->irq;
                 d->periphid     = idev->id;
                 d->dev.platform_data = idev->platform_data;
 
-                ret = amba_device_register(d, &dev->resource);
+                ret = amba_device_add(d, &dev->resource);
                 if (ret) {
                         dev_err(&d->dev, "unable to register device: %d\n", ret);
-                        kfree(d);
+                        amba_device_put(d);
                 }
         }
 
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
index 3d029c9f3ef..5cc7b85ad9d 100644
--- a/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -11,15 +11,9 @@
 #include <mach/platform.h>
 #include <mach/irqs.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 /* FIXME: should not be using soo many LDRs here */
                 ldr     \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514eba4a..00000000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6003f..be9ead4a3bc 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = {
         .gpio_cd        = -1,
 };
 
-static struct amba_device mmc_device = {
-        .dev            = {
-                .init_name = "mb:1c",
-                .platform_data = &mmc_data,
-        },
-        .res            = {
-                .start  = INTEGRATOR_CP_MMC_BASE,
-                .end    = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
-        .periphid       = 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS  { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
 
-static struct amba_device aaci_device = {
-        .dev            = {
-                .init_name = "mb:1d",
-        },
-        .res            = {
-                .start  = INTEGRATOR_CP_AACI_BASE,
-                .end    = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { IRQ_CP_AACIINT, NO_IRQ },
-        .periphid       = 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+        INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+        INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
 /*
@@ -425,21 +407,8 @@ static struct clcd_board clcd_data = {
         .remove         = versatile_clcd_remove_dma,
 };
 
-static struct amba_device clcd_device = {
-        .dev            = {
-                .init_name = "mb:c0",
-                .coherent_dma_mask = ~0,
-                .platform_data = &clcd_data,
-        },
-        .res            = {
-                .start  = INTCP_PA_CLCD_BASE,
-                .end    = INTCP_PA_CLCD_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .dma_mask       = ~0,
-        .irq            = { IRQ_CP_CLCDCINT, NO_IRQ },
-        .periphid       = 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+        { IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
         &mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
index a624a7870c6..1a2d603488d 100644
--- a/arch/arm/mach-iop13xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
@@ -16,9 +16,6 @@
  * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
  */
-        .macro  disable_fiq
-        .endm
-
         .macro get_irqnr_preamble, base, tmp
         mrc     p15, 0, \tmp, c15, c1, 0
         orr     \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3f8ae..00000000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
index b02fb56bafc..ea13ae02d9b 100644
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -9,9 +9,6 @@
  */
 #include <mach/iop32x.h>
 
-        .macro  disable_fiq
-        .endm
-
         .macro get_irqnr_preamble, base, tmp
         mrc     p15, 0, \tmp, c15, c1, 0
         orr     \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727bca9..00000000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
index 4e1f7282b35..0a398fe1fba 100644
--- a/arch/arm/mach-iop33x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -9,9 +9,6 @@
  */
 #include <mach/iop33x.h>
 
-        .macro  disable_fiq
-        .endm
-
         .macro get_irqnr_preamble, base, tmp
         mrc     p15, 0, \tmp, c15, c1, 0
         orr     \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e765397..00000000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
index 5850ffc8c75..c4444dff920 100644
--- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -9,15 +9,9 @@
  */
 #include <mach/irqs.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 
                 mov     \irqnr, #0x0              @clear out irqnr as default
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b2b8e..00000000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb905cc..7c1495e4fe7 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = {
 
 void __init ixp23xx_sys_init(void)
 {
+        /* by default, the idle code is disabled */
+        disable_hlt();
+
         *IXP23XX_EXP_UNIT_FUSE |= 0xf;
         platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 }
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
index 3f5338a7bbd..3fd2cb984e4 100644
--- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -2,15 +2,9 @@
  * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
  */
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
                 ldr     \irqnr, [\irqnr]        @ get interrupt number
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7334b..00000000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
-        if (!hlt_counter)
-                cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4146b..a6329a0a8ec 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void)
 {
         int i = 0;
 
+        /*
+         * ixp4xx does not implement the XScale PWRMODE register
+         * so it must not call cpu_do_idle().
+         */
+        disable_hlt();
+
         /* Route all sources to IRQ instead of FIQ */
         *IXP4XX_ICLR = 0x0;
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
index f2e14e94ed1..79adf83e2c3 100644
--- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -9,15 +9,9 @@
  */
 #include <mach/hardware.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
                 ldr     \irqstat, [\irqstat]            @ get interrupts
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9bef446..00000000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
-        /* ixp4xx does not implement the XScale PWRMODE register,
-         * so it must not call cpu_do_idle() here.
-         */
-#if 0
-        cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
index 8939d36f893..82db29f7af8 100644
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =IRQ_VIRT_BASE
         .endm
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde002b5..00000000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
index b4fe0c11c6c..8315b34f32f 100644
--- a/arch/arm/mach-ks8695/include/mach/entry-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -14,16 +14,10 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
                 ldr     \base, =KS8695_IRQ_VA                   @ Base address of interrupt controller
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \irqstat, [\base, #KS8695_INTMS]        @ Mask Status register
 
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992395b..00000000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks,
-         */
-        cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
index b725f6c9397..24ca11b377c 100644
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -21,16 +21,10 @@
 
 #define LPC32XX_INTC_MASKED_STATUS_OFS  0x8
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
 /*
  * Return IRQ number in irqnr. Also return processor Z flag status in CPSR
  * as set if an interrupt is pending.
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
deleted file mode 100644
index bf176c99152..00000000000
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index bfee5b45510..5d51c102c25 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = {
         .remove         = lpc32xx_clcd_remove,
 };
 
-static struct amba_device lpc32xx_clcd_device = {
-        .dev                            = {
-                .coherent_dma_mask      = ~0,
-                .init_name              = "dev:clcd",
-                .platform_data          = &lpc32xx_clcd_data,
-        },
-        .res                            = {
-                .start                  = LPC32XX_LCD_BASE,
-                .end                    = (LPC32XX_LCD_BASE + SZ_4K - 1),
-                .flags                  = IORESOURCE_MEM,
-        },
-        .dma_mask                       = ~0,
-        .irq                            = {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+        LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
 
 /*
  * AMBA SSP (SPI)
@@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
         .enable_dma             = 0,
 };
 
-static struct amba_device lpc32xx_ssp0_device = {
-        .dev                            = {
-                .coherent_dma_mask      = ~0,
-                .init_name              = "dev:ssp0",
-                .platform_data          = &lpc32xx_ssp0_data,
-        },
-        .res                            = {
-                .start                  = LPC32XX_SSP0_BASE,
-                .end                    = (LPC32XX_SSP0_BASE + SZ_4K - 1),
-                .flags                  = IORESOURCE_MEM,
-        },
-        .dma_mask                       = ~0,
-        .irq                            = {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+        LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index c42d9d4e892..9cff9e7a2b2 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -8,12 +8,6 @@
 
 #include <mach/regs-icu.h>
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         mrc     p15, 0, \tmp, c0, c0, 0         @ CPUID
         and     \tmp, \tmp, #0xff00
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001eab81e..00000000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f052713..00000000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc. 
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */ 
-                
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
-        mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */
-        bic     r0, r1, #(1 << 2)        /* clear dcache bit   */
-        bic     r0, r0, #(1 << 12)       /* clear icache bit   */
-        mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */
-
-        mov     r0, #0                   /* prepare wfi value  */
-        mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */
-        mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */
-        mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */
-
-        mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */
-#endif
-        mov     pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 00000000000..0c9e13c6574
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+        asm volatile (
+
+        "mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
+        "bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
+        "bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
+        "mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
+
+        "mov     r0, #0                   /* prepare wfi value  */ \n\t"
+        "mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
+        "mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
+        "mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
+
+        "mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
+
+        : : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+        arm_pm_idle = msm_idle;
+        return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index 41f7003ef34..f2ae9087f65 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,12 +16,6 @@
  *
  */
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
 #if !defined(CONFIG_ARM_GIC)
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b35da..f5fb2ec87ff 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
  * GNU General Public License for more details.
  *
  */
-void arch_idle(void);
 
 /* low level hardware reset hook -- for example, hitting the
  * PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index 66ae2d29e77..6b1f088e059 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =IRQ_VIRT_BASE
         .endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a5387cec..00000000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847930c..01faffec306 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@ err:
 
 int __init mxs_add_amba_device(const struct amba_device *dev)
 {
-        struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+        struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+                dev->res.start, resource_size(&dev->res));
 
         if (!adev) {
                 pr_err("%s: failed to allocate memory", __func__);
                 return -ENOMEM;
         }
 
-        *adev = *dev;
+        adev->irq[0] = dev->irq[0];
+        adev->irq[1] = dev->irq[1];
 
-        return amba_device_register(adev, &iomem_resource);
+        return amba_device_add(adev, &iomem_resource);
 }
 
 struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db09b49..a5479f76604 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = {		\
                 .end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,   \
                 .flags = IORESOURCE_MEM,                        \
         },                                                      \
-        .irq = {soc ## _INT_DUART, NO_IRQ},                     \
+        .irq = {soc ## _INT_DUART},                             \
 }
 
 #ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S
index 9f0da12e657..0c14259705b 100644
--- a/arch/arm/mach-mxs/include/mach/entry-macro.S
+++ b/arch/arm/mach-mxs/include/mach/entry-macro.S
@@ -23,9 +23,6 @@
 #define MXS_ICOLL_VBASE         MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
 #define HW_ICOLL_STAT_OFFSET    0x70
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         ldr     \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
         cmp     \irqnr, #0x7F
@@ -36,6 +33,3 @@
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =MXS_ICOLL_VBASE
         .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb2942..00000000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da29bd..a9b4bbcdafb 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
         switch (state) {
         case PM_SUSPEND_MEM:
-                arch_idle();
+                cpu_do_idle();
                 break;
 
         default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b9913234bbf..2cdf6ef69be 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@ void clk_put(struct clk *clk)
 {
 }
 
-static struct amba_device fb_device = {
-        .dev            = {
-                .init_name = "fb",
-                .coherent_dma_mask = ~0,
-        },
-        .res            = {
-                .start  = 0x00104000,
-                .end    = 0x00104fff,
-                .flags  = IORESOURCE_MEM,
-        },
-        .irq            = { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
 
 int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
 {
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
deleted file mode 100644
index 6e9f1cbe163..00000000000
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36d58c..00000000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf0034..f6f74adbe8c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void)
 #endif
 }
 
-#define __MEM_4K_RESOURCE(x) \
-        .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+        { IRQ_UART0 }, NULL);
 
-static struct amba_device uart0_device = {
-        .dev = { .init_name = "uart0" },
-        __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
-        .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-        .dev = { .init_name = "uart1" },
-        __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
-        .irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+        { IRQ_UART1 }, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
         &uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4fdd3..27f43a46985 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = {
         GPIO_DEVICE(3),
 };
 
-static struct amba_device cpu8815_amba_rng = {
-        .dev = {
-                .init_name = "rng",
-        },
-        __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
 
 static struct platform_device *platform_devs[] __initdata = {
         cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = {
 };
 
 static struct amba_device *amba_devs[] __initdata = {
-        &cpu8815_amba_rng
+        &cpu8815_amba_rng_device
 };
 
 static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
deleted file mode 100644
index 98ea1c1fbba..00000000000
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Low-level IRQ helper macros for Nomadik platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b8976..00000000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  mach-nomadik/include/mach/system.h
- *
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index bfb4fb1d738..83c0250c530 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -14,15 +14,9 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
                 ldr     \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a16df..00000000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20ca0cc..0c2c3669d59 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/atomic.h>
 
 #include <asm/irq.h>
-#include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
@@ -108,13 +108,7 @@ void omap1_pm_idle(void)
         __u32 use_idlect1 = arm_idlect1_mask;
         int do_sleep = 0;
 
-        local_irq_disable();
         local_fiq_disable();
-        if (need_resched()) {
-                local_fiq_enable();
-                local_irq_enable();
-                return;
-        }
 
 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@ void omap1_pm_idle(void)
                 omap_writel(saved_idlect1, ARM_IDLECT1);
 
                 local_fiq_enable();
-                local_irq_enable();
                 return;
         }
         omap_sram_suspend(omap_readl(ARM_IDLECT1),
                           omap_readl(ARM_IDLECT2));
 
         local_fiq_enable();
-        local_irq_enable();
 }
 
 /*
@@ -583,8 +575,6 @@ static void omap_pm_init_proc(void)
 
 #endif /* DEBUG && CONFIG_PROC_FS */
 
-static void (*saved_idle)(void) = NULL;
-
 /*
  *      omap_pm_prepare - Do preliminary suspend work.
  *
@@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL;
 static int omap_pm_prepare(void)
 {
         /* We cannot sleep in idle until we have resumed */
-        saved_idle = pm_idle;
-        pm_idle = NULL;
+        disable_hlt();
 
         return 0;
 }
@@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state)
 
 static void omap_pm_finish(void)
 {
-        pm_idle = saved_idle;
+        enable_hlt();
 }
 
 
@@ -687,7 +676,7 @@ static int __init omap_pm_init(void)
                 return -ENODEV;
         }
 
-        pm_idle = omap1_pm_idle;
+        arm_pm_idle = omap1_pm_idle;
 
         if (cpu_is_omap7xx())
                 setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e290cc..ce91aad4cda 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin");
 #define ETB_BASE        (L4_EMU_34XX_PHYS + 0x1b000)
 #define DAPCTL          (L4_EMU_34XX_PHYS + 0x1d000)
 
-static struct amba_device omap3_etb_device = {
-        .dev            = {
-                .init_name = "etb",
-        },
-        .res            = {
-                .start  = ETB_BASE,
-                .end    = ETB_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .periphid       = 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
-        .dev            = {
-                .init_name = "etm",
-        },
-        .res            = {
-                .start  = ETM_BASE,
-                .end    = ETM_BASE + SZ_4K - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-        .periphid       = 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
 
 static int __init emu_init(void)
 {
@@ -66,4 +45,3 @@ static int __init emu_init(void)
 }
 
 subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
deleted file mode 100644
index 56964a0c4c7..00000000000
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721ab90..00000000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 23de98d0384..a4eb5c28043 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -226,7 +226,6 @@ static int omap2_can_sleep(void)
 
 static void omap2_pm_idle(void)
 {
-        local_irq_disable();
         local_fiq_disable();
 
         if (!omap2_can_sleep()) {
@@ -243,7 +242,6 @@ static void omap2_pm_idle(void)
 
 out:
         local_fiq_enable();
-        local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -462,7 +460,7 @@ static int __init omap2_pm_init(void)
         }
 
         suspend_set_ops(&omap_pm_ops);
-        pm_idle = omap2_pm_idle;
+        arm_pm_idle = omap2_pm_idle;
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc698757892..b77df735fa6 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@ void omap_sram_idle(void)
 
 static void omap3_pm_idle(void)
 {
-        local_irq_disable();
         local_fiq_disable();
 
-        if (omap_irq_pending() || need_resched())
+        if (omap_irq_pending())
                 goto out;
 
         trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@ static void omap3_pm_idle(void)
 
 out:
         local_fiq_enable();
-        local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@ static int __init omap3_pm_init(void)
         suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-        pm_idle = omap3_pm_idle;
+        arm_pm_idle = omap3_pm_idle;
         omap3_idle_init();
 
         /*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7219c..c840689df24 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  * omap_default_idle - OMAP4 default ilde routine.'
  *
  * Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
  * by secondary CPU with CONFIG_CPUIDLE.
  */
 static void omap_default_idle(void)
 {
-        local_irq_disable();
         local_fiq_disable();
 
         omap_do_wfi();
 
         local_fiq_enable();
-        local_irq_enable();
 }
 
 /**
@@ -255,8 +253,8 @@ static int __init omap4_pm_init(void)
         suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-        /* Overwrite the default arch_idle() */
-        pm_idle = omap_default_idle;
+        /* Overwrite the default cpu_do_idle() */
+        arm_pm_idle = omap_default_idle;
 
         omap4_idle_init();
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118ab43e..873b51d494e 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
-#include <mach/system.h>
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index d658992e540..79eb502a1e6 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
 
 #include <mach/bridge-regs.h>
 
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         ldr     \base, =MAIN_IRQ_CAUSE
         .endm
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a2650cef..00000000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
deleted file mode 100644
index 9b505ac00be..00000000000
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * entry-macro.S
- *
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * Low-level IRQ helper macros for picoXcell platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb57df..00000000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching and wait for interrupt
-         * tricks.
-         */
-        cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
index db7eeebf30d..77a55584671 100644
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -25,15 +25,9 @@
 #define SIC1_BASE_INT   32
 #define SIC2_BASE_INT   64
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 /* decode the MIC interrupt numbers */
                 ldr     \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe718809..00000000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S
index 1c8a50f102a..86434e7a5be 100644
--- a/arch/arm/mach-prima2/include/mach/entry-macro.S
+++ b/arch/arm/mach-prima2/include/mach/entry-macro.S
@@ -20,10 +20,3 @@
         cmp \irqnr, #0x40                       @ the irq num can't be larger than 0x3f
         movges \irqnr, #0
         .endm
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9d0c9..00000000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
deleted file mode 100644
index 260c0c17692..00000000000
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd3cc0..00000000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author:      Nicolas Pitre
- * Created:     Jun 15, 2001
- * Copyright:   MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57aaf2d..f8f2c0ac4c0 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
 #include <asm/setup.h>
 #include <asm/leds.h>
 
-#define AMBA_DEVICE(name,busid,base,plat)                       \
-static struct amba_device name##_device = {                     \
-        .dev            = {                                     \
-                .coherent_dma_mask = ~0,                        \
-                .init_name = busid,                             \
-                .platform_data = plat,                          \
-        },                                                      \
-        .res            = {                                     \
-                .start  = REALVIEW_##base##_BASE,               \
-                .end    = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
-                .flags  = IORESOURCE_MEM,                       \
-        },                                                      \
-        .dma_mask       = ~0,                                   \
-        .irq            = base##_IRQ,                           \
-}
+#define APB_DEVICE(name, busid, base, plat)                     \
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)                     \
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
 
 struct machine_desc;
 
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
deleted file mode 100644
index e8a5179c265..00000000000
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625e3e0..708f84156f2 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC         (IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC          (IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD         (IRQ_DC1176_GIC_START + 15)     /* CLCD controller */
+#define IRQ_DC1176_GPIO0        (IRQ_DC1176_GIC_START + 16)
 #define IRQ_DC1176_SSP          (IRQ_DC1176_GIC_START + 17)     /* SSP port */
 #define IRQ_DC1176_UART0        (IRQ_DC1176_GIC_START + 18)     /* UART 0 on development chip */
 #define IRQ_DC1176_UART1        (IRQ_DC1176_GIC_START + 19)     /* UART 1 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_DMAC         (IRQ_PB1176_GIC_START + 24)     /* DMA controller */
 #define IRQ_PB1176_RTC          (IRQ_PB1176_GIC_START + 25)     /* Real Time Clock */
 
-#define IRQ_PB1176_GPIO0        -1
 #define IRQ_PB1176_SCTL         -1
 
 #define NR_GIC_PB1176           2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671159c..00000000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145f2df..157e1bc6e83 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ       { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ       { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ       { IRQ_EB_GPIO2 }
+#define GPIO3_IRQ       { IRQ_EB_GPIO3 }
 
-#define AACI_IRQ        { IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ        { IRQ_EB_AACI }
 #define MMCI0_IRQ       { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ        { IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ        { IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ        { IRQ_EB_KMI0 }
+#define KMI1_IRQ        { IRQ_EB_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define EB_SMC_IRQ      { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ        { NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ     { IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ        { IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ      { }
+#define MPMC_IRQ        { }
+#define EB_CLCD_IRQ     { IRQ_EB_CLCD }
+#define DMAC_IRQ        { IRQ_EB_DMA }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ        { NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ    { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ       { IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ      { IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ        { }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ    { IRQ_EB_GPIO0 }
+#define GPIO1_IRQ       { IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ      { IRQ_EB_RTC }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ         { IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ    { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ    { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ    { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ    { IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ      { IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ         { IRQ_EB_SCI }
+#define EB_UART0_IRQ    { IRQ_EB_UART0 }
+#define EB_UART1_IRQ    { IRQ_EB_UART1 }
+#define EB_UART2_IRQ    { IRQ_EB_UART2 }
+#define EB_UART3_IRQ    { IRQ_EB_UART3 }
+#define EB_SSP_IRQ      { IRQ_EB_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
         &dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94fb11..b1d7cafa1a6 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * RealView PB1176 AMBA devices
  */
-#define GPIO2_IRQ       { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ       { IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ        { IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ       { IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ       { IRQ_PB1176_GPIO3 }
+#define AACI_IRQ        { IRQ_PB1176_AACI }
 #define MMCI0_IRQ       { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ        { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ        { IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ  { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ        { NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ        { NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ     { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ        { IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ       { IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ  { IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ         { IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ        { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ        { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ        { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ        { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ        { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ          { IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ        { IRQ_PB1176_KMI0 }
+#define KMI1_IRQ        { IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ  { }
+#define MPMC_IRQ        { }
+#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
+#define SCTL_IRQ        { }
+#define PB1176_WATCHDOG_IRQ     { IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ        { IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ       { IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ  { IRQ_DC1176_RTC }
+#define SCI_IRQ         { IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ        { IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ        { IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ        { IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ        { IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ        { IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ          { IRQ_DC1176_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,       "fpga:aaci",    AACI,           NULL);
-AMBA_DEVICE(mmc0,       "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,       "fpga:kmi0",    KMI0,           NULL);
-AMBA_DEVICE(kmi1,       "fpga:kmi1",    KMI1,           NULL);
-AMBA_DEVICE(uart4,      "fpga:uart4",   PB1176_UART4,   NULL);
+APB_DEVICE(aaci,        "fpga:aaci",    AACI,           NULL);
+APB_DEVICE(mmc0,        "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,        "fpga:kmi0",    KMI0,           NULL);
+APB_DEVICE(kmi1,        "fpga:kmi1",    KMI1,           NULL);
+APB_DEVICE(uart4,       "fpga:uart4",   PB1176_UART4,   NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,        "dev:smc",      PB1176_SMC,     NULL);
-AMBA_DEVICE(sctl,       "dev:sctl",     SCTL,           NULL);
-AMBA_DEVICE(wdog,       "dev:wdog",     PB1176_WATCHDOG,        NULL);
-AMBA_DEVICE(gpio0,      "dev:gpio0",    PB1176_GPIO0,   &gpio0_plat_data);
-AMBA_DEVICE(gpio1,      "dev:gpio1",    GPIO1,          &gpio1_plat_data);
-AMBA_DEVICE(gpio2,      "dev:gpio2",    GPIO2,          &gpio2_plat_data);
-AMBA_DEVICE(rtc,        "dev:rtc",      PB1176_RTC,     NULL);
-AMBA_DEVICE(sci0,       "dev:sci0",     SCI,            NULL);
-AMBA_DEVICE(uart0,      "dev:uart0",    PB1176_UART0,   NULL);
-AMBA_DEVICE(uart1,      "dev:uart1",    PB1176_UART1,   NULL);
-AMBA_DEVICE(uart2,      "dev:uart2",    PB1176_UART2,   NULL);
-AMBA_DEVICE(uart3,      "dev:uart3",    PB1176_UART3,   NULL);
-AMBA_DEVICE(ssp0,       "dev:ssp0",     PB1176_SSP,     &ssp0_plat_data);
-AMBA_DEVICE(clcd,       "dev:clcd",     PB1176_CLCD,    &clcd_plat_data);
+AHB_DEVICE(smc,         "dev:smc",      PB1176_SMC,     NULL);
+AHB_DEVICE(sctl,        "dev:sctl",     SCTL,           NULL);
+APB_DEVICE(wdog,        "dev:wdog",     PB1176_WATCHDOG,        NULL);
+APB_DEVICE(gpio0,       "dev:gpio0",    PB1176_GPIO0,   &gpio0_plat_data);
+APB_DEVICE(gpio1,       "dev:gpio1",    GPIO1,          &gpio1_plat_data);
+APB_DEVICE(gpio2,       "dev:gpio2",    GPIO2,          &gpio2_plat_data);
+APB_DEVICE(rtc,         "dev:rtc",      PB1176_RTC,     NULL);
+APB_DEVICE(sci0,        "dev:sci0",     SCI,            NULL);
+APB_DEVICE(uart0,       "dev:uart0",    PB1176_UART0,   NULL);
+APB_DEVICE(uart1,       "dev:uart1",    PB1176_UART1,   NULL);
+APB_DEVICE(uart2,       "dev:uart2",    PB1176_UART2,   NULL);
+APB_DEVICE(uart3,       "dev:uart3",    PB1176_UART3,   NULL);
+APB_DEVICE(ssp0,        "dev:ssp0",     PB1176_SSP,     &ssp0_plat_data);
+AHB_DEVICE(clcd,        "dev:clcd",     PB1176_CLCD,    &clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
         &uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335f66f..ae7fe54f6eb 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PB11MPCore AMBA devices
  */
 
-#define GPIO2_IRQ               { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ               { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ                { IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ               { IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ               { IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ                { IRQ_TC11MP_AACI }
 #define MMCI0_IRQ               { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ                { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ                { IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ          { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ                { NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ         { IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ                { IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ                { NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ     { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ        { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ               { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ          { IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ                 { IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ        { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ        { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ        { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ        { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ          { IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ                { IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ                { IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ          { }
+#define MPMC_IRQ                { }
+#define PB11MP_CLCD_IRQ         { IRQ_PB11MP_CLCD }
+#define DMAC_IRQ                { IRQ_PB11MP_DMAC }
+#define SCTL_IRQ                { }
+#define PB11MP_WATCHDOG_IRQ     { IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ        { IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ               { IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ          { IRQ_TC11MP_RTC }
+#define SCI_IRQ                 { IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ        { IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ        { IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ        { IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ        { IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ          { IRQ_PB11MP_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,       "fpga:aaci",    AACI,           NULL);
-AMBA_DEVICE(mmc0,       "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,       "fpga:kmi0",    KMI0,           NULL);
-AMBA_DEVICE(kmi1,       "fpga:kmi1",    KMI1,           NULL);
-AMBA_DEVICE(uart3,      "fpga:uart3",   PB11MP_UART3,   NULL);
+APB_DEVICE(aaci,        "fpga:aaci",    AACI,           NULL);
+APB_DEVICE(mmc0,        "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,        "fpga:kmi0",    KMI0,           NULL);
+APB_DEVICE(kmi1,        "fpga:kmi1",    KMI1,           NULL);
+APB_DEVICE(uart3,       "fpga:uart3",   PB11MP_UART3,   NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,        "dev:smc",      PB11MP_SMC,     NULL);
-AMBA_DEVICE(sctl,       "dev:sctl",     SCTL,           NULL);
-AMBA_DEVICE(wdog,       "dev:wdog",     PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,      "dev:gpio0",    PB11MP_GPIO0,   &gpio0_plat_data);
-AMBA_DEVICE(gpio1,      "dev:gpio1",    GPIO1,          &gpio1_plat_data);
-AMBA_DEVICE(gpio2,      "dev:gpio2",    GPIO2,          &gpio2_plat_data);
-AMBA_DEVICE(rtc,        "dev:rtc",      PB11MP_RTC,     NULL);
-AMBA_DEVICE(sci0,       "dev:sci0",     SCI,            NULL);
-AMBA_DEVICE(uart0,      "dev:uart0",    PB11MP_UART0,   NULL);
-AMBA_DEVICE(uart1,      "dev:uart1",    PB11MP_UART1,   NULL);
-AMBA_DEVICE(uart2,      "dev:uart2",    PB11MP_UART2,   NULL);
-AMBA_DEVICE(ssp0,       "dev:ssp0",     PB11MP_SSP,     &ssp0_plat_data);
+AHB_DEVICE(smc,         "dev:smc",      PB11MP_SMC,     NULL);
+AHB_DEVICE(sctl,        "dev:sctl",     SCTL,           NULL);
+APB_DEVICE(wdog,        "dev:wdog",     PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0,       "dev:gpio0",    PB11MP_GPIO0,   &gpio0_plat_data);
+APB_DEVICE(gpio1,       "dev:gpio1",    GPIO1,          &gpio1_plat_data);
+APB_DEVICE(gpio2,       "dev:gpio2",    GPIO2,          &gpio2_plat_data);
+APB_DEVICE(rtc,         "dev:rtc",      PB11MP_RTC,     NULL);
+APB_DEVICE(sci0,        "dev:sci0",     SCI,            NULL);
+APB_DEVICE(uart0,       "dev:uart0",    PB11MP_UART0,   NULL);
+APB_DEVICE(uart1,       "dev:uart1",    PB11MP_UART1,   NULL);
+APB_DEVICE(uart2,       "dev:uart2",    PB11MP_UART2,   NULL);
+APB_DEVICE(ssp0,        "dev:ssp0",     PB11MP_SSP,     &ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,       "issp:clcd",    PB11MP_CLCD,    &clcd_plat_data);
-AMBA_DEVICE(dmac,       "issp:dmac",    DMAC,           NULL);
+AHB_DEVICE(clcd,        "issp:clcd",    PB11MP_CLCD,    &clcd_plat_data);
+AHB_DEVICE(dmac,        "issp:dmac",    DMAC,           NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
         &dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59296f..59650174e6e 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBA8Core AMBA devices
  */
 
-#define GPIO2_IRQ               { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ               { IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ                { IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ               { IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ               { IRQ_PBA8_GPIO3 }
+#define AACI_IRQ                { IRQ_PBA8_AACI }
 #define MMCI0_IRQ               { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ                { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ                { IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ            { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ                { NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ           { IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ                { IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ                { NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ       { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ          { IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ               { IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ            { IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ                 { IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ          { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ          { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ          { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ          { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ            { IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ                { IRQ_PBA8_KMI0 }
+#define KMI1_IRQ                { IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ            { }
+#define MPMC_IRQ                { }
+#define PBA8_CLCD_IRQ           { IRQ_PBA8_CLCD }
+#define DMAC_IRQ                { IRQ_PBA8_DMAC }
+#define SCTL_IRQ                { }
+#define PBA8_WATCHDOG_IRQ       { IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ          { IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ               { IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ            { IRQ_PBA8_RTC }
+#define SCI_IRQ                 { IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ          { IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ          { IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ          { IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ          { IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ            { IRQ_PBA8_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,       "fpga:aaci",    AACI,           NULL);
-AMBA_DEVICE(mmc0,       "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,       "fpga:kmi0",    KMI0,           NULL);
-AMBA_DEVICE(kmi1,       "fpga:kmi1",    KMI1,           NULL);
-AMBA_DEVICE(uart3,      "fpga:uart3",   PBA8_UART3,     NULL);
+APB_DEVICE(aaci,        "fpga:aaci",    AACI,           NULL);
+APB_DEVICE(mmc0,        "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,        "fpga:kmi0",    KMI0,           NULL);
+APB_DEVICE(kmi1,        "fpga:kmi1",    KMI1,           NULL);
+APB_DEVICE(uart3,       "fpga:uart3",   PBA8_UART3,     NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,        "dev:smc",      PBA8_SMC,       NULL);
-AMBA_DEVICE(sctl,       "dev:sctl",     SCTL,           NULL);
-AMBA_DEVICE(wdog,       "dev:wdog",     PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,      "dev:gpio0",    PBA8_GPIO0,     &gpio0_plat_data);
-AMBA_DEVICE(gpio1,      "dev:gpio1",    GPIO1,          &gpio1_plat_data);
-AMBA_DEVICE(gpio2,      "dev:gpio2",    GPIO2,          &gpio2_plat_data);
-AMBA_DEVICE(rtc,        "dev:rtc",      PBA8_RTC,       NULL);
-AMBA_DEVICE(sci0,       "dev:sci0",     SCI,            NULL);
-AMBA_DEVICE(uart0,      "dev:uart0",    PBA8_UART0,     NULL);
-AMBA_DEVICE(uart1,      "dev:uart1",    PBA8_UART1,     NULL);
-AMBA_DEVICE(uart2,      "dev:uart2",    PBA8_UART2,     NULL);
-AMBA_DEVICE(ssp0,       "dev:ssp0",     PBA8_SSP,       &ssp0_plat_data);
+AHB_DEVICE(smc,         "dev:smc",      PBA8_SMC,       NULL);
+AHB_DEVICE(sctl,        "dev:sctl",     SCTL,           NULL);
+APB_DEVICE(wdog,        "dev:wdog",     PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0,       "dev:gpio0",    PBA8_GPIO0,     &gpio0_plat_data);
+APB_DEVICE(gpio1,       "dev:gpio1",    GPIO1,          &gpio1_plat_data);
+APB_DEVICE(gpio2,       "dev:gpio2",    GPIO2,          &gpio2_plat_data);
+APB_DEVICE(rtc,         "dev:rtc",      PBA8_RTC,       NULL);
+APB_DEVICE(sci0,        "dev:sci0",     SCI,            NULL);
+APB_DEVICE(uart0,       "dev:uart0",    PBA8_UART0,     NULL);
+APB_DEVICE(uart1,       "dev:uart1",    PBA8_UART1,     NULL);
+APB_DEVICE(uart2,       "dev:uart2",    PBA8_UART2,     NULL);
+APB_DEVICE(ssp0,        "dev:ssp0",     PBA8_SSP,       &ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,       "issp:clcd",    PBA8_CLCD,      &clcd_plat_data);
-AMBA_DEVICE(dmac,       "issp:dmac",    DMAC,           NULL);
+AHB_DEVICE(clcd,        "issp:clcd",    PBA8_CLCD,      &clcd_plat_data);
+AHB_DEVICE(dmac,        "issp:dmac",    DMAC,           NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
         &dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac715645b86..1cd9956f587 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBXCore AMBA devices
  */
 
-#define GPIO2_IRQ               { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ               { IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ                { IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ               { IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ               { IRQ_PBX_GPIO3 }
+#define AACI_IRQ                { IRQ_PBX_AACI }
 #define MMCI0_IRQ               { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ                { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ                { IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ             { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ                { NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ            { IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ                { IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ                { NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ        { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ           { IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ               { IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ             { IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ                 { IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ           { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ           { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ           { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ           { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ             { IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ                { IRQ_PBX_KMI0 }
+#define KMI1_IRQ                { IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ             { }
+#define MPMC_IRQ                { }
+#define PBX_CLCD_IRQ            { IRQ_PBX_CLCD }
+#define DMAC_IRQ                { IRQ_PBX_DMAC }
+#define SCTL_IRQ                { }
+#define PBX_WATCHDOG_IRQ        { IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ           { IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ               { IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ             { IRQ_PBX_RTC }
+#define SCI_IRQ                 { IRQ_PBX_SCI }
+#define PBX_UART0_IRQ           { IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ           { IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ           { IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ           { IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ             { IRQ_PBX_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,       "fpga:aaci",    AACI,           NULL);
-AMBA_DEVICE(mmc0,       "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,       "fpga:kmi0",    KMI0,           NULL);
-AMBA_DEVICE(kmi1,       "fpga:kmi1",    KMI1,           NULL);
-AMBA_DEVICE(uart3,      "fpga:uart3",   PBX_UART3,      NULL);
+APB_DEVICE(aaci,        "fpga:aaci",    AACI,           NULL);
+APB_DEVICE(mmc0,        "fpga:mmc0",    MMCI0,          &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,        "fpga:kmi0",    KMI0,           NULL);
+APB_DEVICE(kmi1,        "fpga:kmi1",    KMI1,           NULL);
+APB_DEVICE(uart3,       "fpga:uart3",   PBX_UART3,      NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,        "dev:smc",      PBX_SMC,        NULL);
-AMBA_DEVICE(sctl,       "dev:sctl",     SCTL,           NULL);
-AMBA_DEVICE(wdog,       "dev:wdog",     PBX_WATCHDOG,   NULL);
-AMBA_DEVICE(gpio0,      "dev:gpio0",    PBX_GPIO0,      &gpio0_plat_data);
-AMBA_DEVICE(gpio1,      "dev:gpio1",    GPIO1,          &gpio1_plat_data);
-AMBA_DEVICE(gpio2,      "dev:gpio2",    GPIO2,          &gpio2_plat_data);
-AMBA_DEVICE(rtc,        "dev:rtc",      PBX_RTC,        NULL);
-AMBA_DEVICE(sci0,       "dev:sci0",     SCI,            NULL);
-AMBA_DEVICE(uart0,      "dev:uart0",    PBX_UART0,      NULL);
-AMBA_DEVICE(uart1,      "dev:uart1",    PBX_UART1,      NULL);
-AMBA_DEVICE(uart2,      "dev:uart2",    PBX_UART2,      NULL);
-AMBA_DEVICE(ssp0,       "dev:ssp0",     PBX_SSP,        &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc",      PBX_SMC,        NULL);
+AHB_DEVICE(sctl,        "dev:sctl",     SCTL,           NULL);
+APB_DEVICE(wdog,        "dev:wdog",     PBX_WATCHDOG,   NULL);
+APB_DEVICE(gpio0,       "dev:gpio0",    PBX_GPIO0,      &gpio0_plat_data);
+APB_DEVICE(gpio1,       "dev:gpio1",    GPIO1,          &gpio1_plat_data);
+APB_DEVICE(gpio2,       "dev:gpio2",    GPIO2,          &gpio2_plat_data);
+APB_DEVICE(rtc,         "dev:rtc",      PBX_RTC,        NULL);
+APB_DEVICE(sci0,        "dev:sci0",     SCI,            NULL);
+APB_DEVICE(uart0,       "dev:uart0",    PBX_UART0,      NULL);
+APB_DEVICE(uart1,       "dev:uart1",    PBX_UART1,      NULL);
+APB_DEVICE(uart2,       "dev:uart2",    PBX_UART2,      NULL);
+APB_DEVICE(ssp0,        "dev:ssp0",     PBX_SSP,        &ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,       "issp:clcd",    PBX_CLCD,       &clcd_plat_data);
-AMBA_DEVICE(dmac,       "issp:dmac",    DMAC,           NULL);
+AHB_DEVICE(clcd,        "issp:clcd",    PBX_CLCD,       &clcd_plat_data);
+AHB_DEVICE(dmac,        "issp:dmac",    DMAC,           NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
         &dmac_device,
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index aa77bc9efbb..dfa405c0cfd 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y                   := dma.o irq.o riscpc.o
+obj-y                   := dma.o fiq.o irq.o riscpc.o
 obj-m                   :=
 obj-n                   :=
 obj-                    :=
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
new file mode 100644
index 00000000000..48ddd57db16
--- /dev/null
+++ b/arch/arm/mach-rpc/fiq.S
@@ -0,0 +1,16 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/entry-macro.S>
+
+        .text
+
+        .global rpc_default_fiq_end
+ENTRY(rpc_default_fiq_start)
+        mov     r12, #ioc_base_high
+        .if     ioc_base_low
+        orr     r12, r12, #ioc_base_low
+        .endif
+        strb    r12, [r12, #0x38]       @ Disable FIQ register
+        subs    pc, lr, #4
+rpc_default_fiq_end:
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
index 4e7e5414409..7178368d706 100644
--- a/arch/arm/mach-rpc/include/mach/entry-macro.S
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -10,7 +10,3 @@
         orr     \base, \base, #ioc_base_low
         .endif
         .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab94b6a..00000000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 2e1b5309fba..cf0e669eaf1 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -5,6 +5,7 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/iomd.h>
 #include <asm/irq.h>
+#include <asm/fiq.h>
 
 static void iomd_ack_irq_a(struct irq_data *d)
 {
@@ -112,6 +113,8 @@ static struct irq_chip iomd_fiq_chip = {
         .irq_unmask     = iomd_unmask_irq_fiq,
 };
 
+extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
+
 void __init rpc_init_irq(void)
 {
         unsigned int irq, flags;
@@ -121,6 +124,9 @@ void __init rpc_init_irq(void)
         iomd_writeb(0, IOMD_FIQMASK);
         iomd_writeb(0, IOMD_DMAMASK);
 
+        set_fiq_handler(&rpc_default_fiq_start,
+                &rpc_default_fiq_end - &rpc_default_fiq_start);
+
         for (irq = 0; irq < NR_IRQS; irq++) {
                 flags = IRQF_VALID;
 
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
index 473b3cd37d9..7615a14773f 100644
--- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -25,9 +25,6 @@
         .macro  get_irqnr_preamble, base, tmp
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 
                 mov     \base, #S3C24XX_VA_IRQ
@@ -71,8 +68,3 @@
                 @@ exit here, Z flag unset if IRQ
 
         .endm
-
-                /* currently don't need an disable_fiq macro */
-
-                .macro  disable_fiq
-                .endm
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1a5c8..00000000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
-        unsigned long tmp;
-        int i;
-
-        /* idle the system by using the idle mode which will wait for an
-         * interrupt to happen before restarting the system.
-         */
-
-        /* Warning: going into idle state upsets jtag scanning */
-
-        __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-                     S3C2410_CLKCON);
-
-        /* the samsung port seems to do a loop and then unset idle.. */
-        for (i = 0; i < 50; i++) {
-                tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-        }
-
-        /* this bit is not cleared on re-start... */
-
-        __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-                     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-        if (s3c24xx_idle != NULL)
-                (s3c24xx_idle)();
-        else
-                s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85a97c..c6eac987109 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
-
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
@@ -164,7 +162,7 @@ void __init s3c2412_map_io(void)
 
         /* set our idle function */
 
-        s3c24xx_idle = s3c2412_idle;
+        arm_pm_idle = s3c2412_idle;
 
         /* register our io-tables */
 
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d2808d3..08bb0355159 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/gpio-core.h>
@@ -88,8 +87,6 @@ int __init s3c2416_init(void)
 {
         printk(KERN_INFO "S3C2416: Initializing architecture\n");
 
-        /* s3c24xx_idle = s3c2416_idle; */
-
         /* change WDT IRQ number */
         s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
         s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
deleted file mode 100644
index dc2bc15142c..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed4389ae..00000000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-        /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a37644..9143f8b1996 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@ static void s5p64x0_idle(void)
 {
         unsigned long val;
 
-        if (!need_resched()) {
-                val = __raw_readl(S5P64X0_PWR_CFG);
-                val &= ~(0x3 << 5);
-                val |= (0x1 << 5);
-                __raw_writel(val, S5P64X0_PWR_CFG);
+        val = __raw_readl(S5P64X0_PWR_CFG);
+        val &= ~(0x3 << 5);
+        val |= (0x1 << 5);
+        __raw_writel(val, S5P64X0_PWR_CFG);
 
-                cpu_do_idle();
-        }
-        local_irq_enable();
+        cpu_do_idle();
 }
 
 /*
@@ -286,7 +283,7 @@ int __init s5p64x0_init(void)
         printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
 
         /* set idle function */
-        pm_idle = s5p64x0_idle;
+        arm_pm_idle = s5p64x0_idle;
 
         return device_register(&s5p64x0_dev);
 }
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c074440..f7f68ad7791 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = {
         .peri_id = s5p6450_pdma_peri,
 };
 
-struct amba_device s5p64x0_device_pdma = {
-        .dev = {
-                .init_name = "dma-pl330",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-        },
-        .res = {
-                .start = S5P64X0_PA_PDMA,
-                .end = S5P64X0_PA_PDMA + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_DMA0, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
+        {IRQ_DMA0}, NULL);
 
 static int __init s5p64x0_dma_init(void)
 {
         if (soc_is_s5p6450()) {
                 dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
                 dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
-                s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+                s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
         } else {
                 dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
                 dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
-                s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+                s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
         }
 
-        amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+        amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
 
         return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
deleted file mode 100644
index fbb246d0a3d..00000000000
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Low-level IRQ helper macros for the Samsung S5P64X0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e0954a2..00000000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-        /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c9095730a7f..ff71e2d467c 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
         }
 };
 
-static void s5pc100_idle(void)
-{
-        if (!need_resched())
-                cpu_do_idle();
-
-        local_irq_enable();
-}
-
 /*
  * s5pc100_map_io
  *
@@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init);
 int __init s5pc100_init(void)
 {
         printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
-        /* set idle function */
-        pm_idle = s5pc100_idle;
-
         return device_register(&s5pc100_dev);
 }
 
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d313f..96b1ab3dcd4 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = {
         .peri_id = pdma0_peri,
 };
 
-struct amba_device s5pc100_device_pdma0 = {
-        .dev = {
-                .init_name = "dma-pl330.0",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &s5pc100_pdma0_pdata,
-        },
-        .res = {
-                .start = S5PC100_PA_PDMA0,
-                .end = S5PC100_PA_PDMA0 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA0, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma0,  "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
+        {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
 
 u8 pdma1_peri[] = {
         DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = {
         .peri_id = pdma1_peri,
 };
 
-struct amba_device s5pc100_device_pdma1 = {
-        .dev = {
-                .init_name = "dma-pl330.1",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &s5pc100_pdma1_pdata,
-        },
-        .res = {
-                .start = S5PC100_PA_PDMA1,
-                .end = S5PC100_PA_PDMA1 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA1, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
+        {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
 
 static int __init s5pc100_dma_init(void)
 {
         dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
-        amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+        amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
 
         dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
-        amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+        amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
 
         return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index b8c242edfa2..bad0700457d 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,14 +12,8 @@
  * warranty of any kind, whether express or implied.
 */
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         .endm
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c29851..00000000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-        /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdcc12c..4c9e9027df9 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
         }
 };
 
-static void s5pv210_idle(void)
-{
-        if (!need_resched())
-                cpu_do_idle();
-
-        local_irq_enable();
-}
-
 void s5pv210_restart(char mode, const char *cmd)
 {
         __raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init);
 int __init s5pv210_init(void)
 {
         printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
-        /* set idle function */
-        pm_idle = s5pv210_idle;
-
         return device_register(&s5pv210_dev);
 }
 
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0267f..f6885d247d1 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = {
         .peri_id = pdma0_peri,
 };
 
-struct amba_device s5pv210_device_pdma0 = {
-        .dev = {
-                .init_name = "dma-pl330.0",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &s5pv210_pdma0_pdata,
-        },
-        .res = {
-                .start = S5PV210_PA_PDMA0,
-                .end = S5PV210_PA_PDMA0 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA0, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
+        {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
 
 u8 pdma1_peri[] = {
         DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = {
         .peri_id = pdma1_peri,
 };
 
-struct amba_device s5pv210_device_pdma1 = {
-        .dev = {
-                .init_name = "dma-pl330.1",
-                .dma_mask = &dma_dmamask,
-                .coherent_dma_mask = DMA_BIT_MASK(32),
-                .platform_data = &s5pv210_pdma1_pdata,
-        },
-        .res = {
-                .start = S5PV210_PA_PDMA1,
-                .end = S5PV210_PA_PDMA1 + SZ_4K,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_PDMA1, NO_IRQ},
-        .periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
+        {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
 
 static int __init s5pv210_dma_init(void)
 {
         dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
-        amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+        amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
 
         dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
         dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
-        amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+        amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
 
         return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
deleted file mode 100644
index bebca1b5d0b..00000000000
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ced860..00000000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-        /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
index 6aa13c46c5d..8cf7630bf02 100644
--- a/arch/arm/mach-sa1100/include/mach/entry-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -8,17 +8,11 @@
  * warranty of any kind, whether express or implied.
  */
 
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 mov     \base, #0xfa000000              @ ICIP = 0xfa050000
                 add     \base, \base, #0x00050000
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
                 ldr     \irqstat, [\base]               @ get irqs
                 ldr     \irqnr, [\base, #4]             @ ICMR = 0xfa050004
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208f76d..00000000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c254ad6..6a2a7f2c255 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@ static struct sys_timer shark_timer = {
         .init           = shark_timer_init,
 };
 
+static void shark_init_early(void)
+{
+        disable_hlt();
+}
+
 MACHINE_START(SHARK, "Shark")
         /* Maintainer: Alexander Schulz */
         .atag_offset    = 0x3000,
         .map_io         = shark_map_io,
+        .init_early     = shark_init_early,
         .init_irq       = shark_init_irq,
         .timer          = &shark_timer,
         .dma_zone_size  = SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index 0bb6cc626eb..5901b09fc96 100644
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -7,16 +7,10 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-                .macro  disable_fiq
-                .endm
-
                 .macro  get_irqnr_preamble, base, tmp
                 mov     \base, #0xe0000000
                 .endm
 
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
-
                 .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 
                 mov     \irqstat, #0x0C
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5050a..00000000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
deleted file mode 100644
index 2a57b2964ee..00000000000
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010  Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18ddbf..3bbcb3fa077 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
         soft_restart(0);
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
deleted file mode 100644
index de3bb41c8e9..00000000000
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee6335c9..00000000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 4f7f5182dd4..f7db66812ab 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = {
         .irq_base       = SPEAR300_GPIO1_INT_BASE,
 };
 
-struct amba_device spear300_gpio1_device = {
-        .dev = {
-                .init_name = "gpio1",
-                .platform_data = &gpio1_plat_data,
-        },
-        .res = {
-                .start = SPEAR300_GPIO_BASE,
-                .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+        {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
 
 /* spear300 routines */
 void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45da86a..b1733c37f20 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = {
         .irq_base       = SPEAR3XX_GPIO_INT_BASE,
 };
 
-struct amba_device spear3xx_gpio_device = {
-        .dev = {
-                .init_name = "gpio",
-                .platform_data = &gpio_plat_data,
-        },
-        .res = {
-                .start = SPEAR3XX_ICM3_GPIO_BASE,
-                .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+        {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
 
 /* uart device registration */
-struct amba_device spear3xx_uart_device = {
-        .dev = {
-                .init_name = "uart",
-        },
-        .res = {
-                .start = SPEAR3XX_ICM1_UART_BASE,
-                .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+        {SPEAR3XX_IRQ_UART}, NULL);
 
 /* Do spear3xx familiy common initialization part here */
 void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
deleted file mode 100644
index d490a910d92..00000000000
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be81cf..00000000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif  /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628c8b2..b997b1b10ba 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@ struct amba_device uart_device[] = {
                         .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
                         .flags = IORESOURCE_MEM,
                 },
-                .irq = {IRQ_UART_0, NO_IRQ},
+                .irq = {IRQ_UART_0},
         }, {
                 .dev = {
                         .init_name = "uart1",
@@ -44,7 +44,7 @@ struct amba_device uart_device[] = {
                         .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
                         .flags = IORESOURCE_MEM,
                 },
-                .irq = {IRQ_UART_1, NO_IRQ},
+                .irq = {IRQ_UART_1},
         }
 };
 
@@ -73,7 +73,7 @@ struct amba_device gpio_device[] = {
                         .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
                         .flags = IORESOURCE_MEM,
                 },
-                .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+                .irq = {IRQ_LOCAL_GPIO},
         }, {
                 .dev = {
                         .init_name = "gpio1",
@@ -84,7 +84,7 @@ struct amba_device gpio_device[] = {
                         .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
                         .flags = IORESOURCE_MEM,
                 },
-                .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+                .irq = {IRQ_BASIC_GPIO},
         }, {
                 .dev = {
                         .init_name = "gpio2",
@@ -95,7 +95,7 @@ struct amba_device gpio_device[] = {
                         .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
                         .flags = IORESOURCE_MEM,
                 },
-                .irq = {IRQ_APPL_GPIO, NO_IRQ},
+                .irq = {IRQ_APPL_GPIO},
         }
 };
 
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb90169ae..2db20da1d58 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,7 +27,6 @@
 #include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
-#include <mach/system.h>
 
 #include "board.h"
 #include "clock.h"
@@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
+        disable_hlt();  /* idle WFI usage needs to be confirmed */
+
         tegra_init_fuse();
         tegra2_init_clocks();
         tegra_clk_init_from_table(tegra20_clk_init_table);
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
deleted file mode 100644
index e577cfe27e7..00000000000
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-tegra/include/mach/entry-macro.S
- *
- * Copyright (C) 2009 Palm, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988bf6f..00000000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *      Colin Cross <ccross@google.com>
- *      Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index a7b3f36e226..b911590c8ae 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -95,19 +95,9 @@ static struct amba_pl011_data uart0_plat_data = {
 #endif
 };
 
-static struct amba_device uart0_device = {
-        .dev = {
-                .coherent_dma_mask = ~0,
-                .init_name = "uart0", /* Slow device at 0x3000 offset */
-                .platform_data = &uart0_plat_data,
-        },
-        .res = {
-                .start = U300_UART0_BASE,
-                .end   = U300_UART0_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+        { IRQ_U300_UART0 }, &uart0_plat_data);
 
 /* The U335 have an additional UART1 on the APP CPU */
 #ifdef CONFIG_MACH_U300_BS335
@@ -119,71 +109,28 @@ static struct amba_pl011_data uart1_plat_data = {
 #endif
 };
 
-static struct amba_device uart1_device = {
-        .dev = {
-                .coherent_dma_mask = ~0,
-                .init_name = "uart1", /* Fast device at 0x7000 offset */
-                .platform_data = &uart1_plat_data,
-        },
-        .res = {
-                .start = U300_UART1_BASE,
-                .end   = U300_UART1_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+        { IRQ_U300_UART1 }, &uart1_plat_data);
 #endif
 
-static struct amba_device pl172_device = {
-        .dev = {
-                .init_name = "pl172", /* AHB device at 0x4000 offset */
-                .platform_data = NULL,
-        },
-        .res = {
-                .start = U300_EMIF_CFG_BASE,
-                .end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
 
 
 /*
  * Everything within this next ifdef deals with external devices connected to
  * the APP SPI bus.
  */
-static struct amba_device pl022_device = {
-        .dev = {
-                .coherent_dma_mask = ~0,
-                .init_name = "pl022", /* Fast device at 0x6000 offset */
-        },
-        .res = {
-                .start = U300_SPI_BASE,
-                .end   = U300_SPI_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_U300_SPI, NO_IRQ },
-        /*
-         * This device has a DMA channel but the Linux driver does not use
-         * it currently.
-         */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+        { IRQ_U300_SPI }, NULL);
 
-static struct amba_device mmcsd_device = {
-        .dev = {
-                .init_name = "mmci", /* Fast device at 0x1000 offset */
-                .platform_data = NULL, /* Added later */
-        },
-        .res = {
-                .start = U300_MMCSD_BASE,
-                .end   = U300_MMCSD_BASE + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        },
-        .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
-        /*
-         * This device has a DMA channel but the Linux driver does not use
-         * it currently.
-         */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+        U300_MMCSD_IRQS, NULL);
 
 /*
  * The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
deleted file mode 100644
index 7181d6ac665..00000000000
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/entry-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Low-level IRQ helper macros for ST-Ericsson U300
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e3829..00000000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e5418d8..898a64517b0 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
         struct amba_device *dev;
         int ret;
 
-        dev = kzalloc(sizeof *dev, GFP_KERNEL);
+        dev = amba_device_alloc(name, base, SZ_4K);
         if (!dev)
                 return ERR_PTR(-ENOMEM);
 
-        dev->dev.init_name = name;
-
-        dev->res.start = base;
-        dev->res.end = base + SZ_4K - 1;
-        dev->res.flags = IORESOURCE_MEM;
-
         dev->dma_mask = DMA_BIT_MASK(32);
         dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
         dev->irq[0] = irq;
-        dev->irq[1] = NO_IRQ;
 
         dev->periphid = periphid;
 
         dev->dev.platform_data = pdata;
 
-        ret = amba_device_register(dev, &iomem_resource);
+        ret = amba_device_add(dev, &iomem_resource);
         if (ret) {
-                kfree(dev);
+                amba_device_put(dev);
                 return ERR_PTR(ret);
         }
 
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
deleted file mode 100644
index e16299e1020..00000000000
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Low-level IRQ helper macros for U8500 platforms
- *
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is a copy of ARM Realview platform.
- *      -just satisfied checkpatch script.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c919c2..00000000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 008ce22b9a0..0968772aedb 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -585,58 +585,58 @@ static struct pl022_ssp_controller ssp0_plat_data = {
         .num_chipselect = 1,
 };
 
-#define AACI_IRQ        { IRQ_AACI, NO_IRQ }
+#define AACI_IRQ        { IRQ_AACI }
 #define MMCI0_IRQ       { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ        { IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ        { IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ        { IRQ_SIC_KMI0 }
+#define KMI1_IRQ        { IRQ_SIC_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define SMC_IRQ         { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ        { NO_IRQ, NO_IRQ }
-#define CLCD_IRQ        { IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ        { IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ         { }
+#define MPMC_IRQ        { }
+#define CLCD_IRQ        { IRQ_CLCDINT }
+#define DMAC_IRQ        { IRQ_DMAINT }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ        { NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ    { IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ       { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ       { IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ         { IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ        { }
+#define WATCHDOG_IRQ    { IRQ_WDOGINT }
+#define GPIO0_IRQ       { IRQ_GPIOINT0 }
+#define GPIO1_IRQ       { IRQ_GPIOINT1 }
+#define RTC_IRQ         { IRQ_RTCINT }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ         { IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ       { IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ       { IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ       { IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ         { IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ         { IRQ_SCIINT }
+#define UART0_IRQ       { IRQ_UARTINT0 }
+#define UART1_IRQ       { IRQ_UARTINT1 }
+#define UART2_IRQ       { IRQ_UARTINT2 }
+#define SSP_IRQ         { IRQ_SSPINT }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
+AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
         &dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f555f31..683e60776a8 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev);
 extern struct of_dev_auxdata versatile_auxdata_lookup[];
 #endif
 
-#define AMBA_DEVICE(name,busid,base,plat)                       \
-static struct amba_device name##_device = {                     \
-        .dev            = {                                     \
-                .coherent_dma_mask = ~0,                        \
-                .init_name = busid,                             \
-                .platform_data = plat,                          \
-        },                                                      \
-        .res            = {                                     \
-                .start  = VERSATILE_##base##_BASE,              \
-                .end    = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
-                .flags  = IORESOURCE_MEM,                       \
-        },                                                      \
-        .dma_mask       = ~0,                                   \
-        .irq            = base##_IRQ,                           \
-}
+#define APB_DEVICE(name, busid, base, plat)     \
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)     \
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
 
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
deleted file mode 100644
index b6f0dbf122e..00000000000
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347895f..00000000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c197500..19738331bd3 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = {
         .irq_base       = IRQ_GPIO3_START,
 };
 
-#define UART3_IRQ       { IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ        { IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ       { IRQ_SIC_UART3 }
+#define SCI1_IRQ        { IRQ_SIC_SCI3 }
 #define MMCI1_IRQ       { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ       { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ       { IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ       { IRQ_GPIOINT2 }
+#define GPIO3_IRQ       { IRQ_GPIOINT3 }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
 
 /* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
-AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
+APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
+APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
         &uart3_device,
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f4397159c17..9f0f2827c71 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,2 @@
 #define __MMIO_P2V(x)   (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
 #define MMIO_P2V(x)     ((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat)       \
-struct amba_device name##_device = {            \
-        .dev            = {                     \
-                .coherent_dma_mask = ~0UL,      \
-                .init_name = busid,             \
-                .platform_data = plat,          \
-        },                                      \
-        .res            = {                     \
-                .start  = base,                 \
-                .end    = base + SZ_4K - 1,     \
-                .flags  = IORESOURCE_MEM,       \
-        },                                      \
-        .dma_mask       = ~0UL,                 \
-        .irq            = IRQ_##base,           \
-        /* .dma         = DMA_##base,*/         \
-}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c184e5..1b1d2e4892b 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = {
         .remove         = versatile_clcd_remove_dma,
 };
 
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
 
 static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
         &clcd_device,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4faae..a40468f3b93 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -35,7 +35,7 @@
  * Interrupts.  Those in {} are for AMBA devices
  */
 #define IRQ_CT_CA9X4_CLCDC      { 76 }
-#define IRQ_CT_CA9X4_DMC        { -1 }
+#define IRQ_CT_CA9X4_DMC        { 0 }
 #define IRQ_CT_CA9X4_SMC        { 77, 78 }
 #define IRQ_CT_CA9X4_TIMER0     80
 #define IRQ_CT_CA9X4_TIMER1     81
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
deleted file mode 100644
index a14f9e62ca9..00000000000
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ /dev/null
@@ -1,5 +0,0 @@
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e265b..00000000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca0e50..ad64f97a200 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = {
         .status         = v2m_mmci_status,
 };
 
-static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
-static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
-static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
 
 static struct amba_device *v2m_amba_devs[] __initdata = {
         &aaci_device,
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
index 92684c7eaed..367d1b55fb9 100644
--- a/arch/arm/mach-vt8500/include/mach/entry-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S
@@ -8,18 +8,12 @@
  * warranty of any kind, whether express or implied.
  */
 
-        .macro  disable_fiq
-        .endm
-
         .macro  get_irqnr_preamble, base, tmp
         @ physical 0xd8140000 is virtual 0xf8140000
         mov     \base, #0xf8000000
         orr     \base, \base, #0x00140000
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
         ldr     \irqnr, [\base]
         cmp     \irqnr, #63 @ may be false positive, check interrupt status
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757eaf26..58fa8010ee6 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
 /* PM Software Reset request register */
 #define VT8500_PMSR_VIRT        0xf8130060
 
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
         writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110befb7a..db82568a998 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
 
 void __init nuc900_board_init(struct platform_device **device, int size)
 {
+        disable_hlt();
         platform_add_devices(device, size);
         platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
         spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S
index d39aca5be9e..e286daca682 100644
--- a/arch/arm/mach-w90x900/include/mach/entry-macro.S
+++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S
@@ -15,9 +15,6 @@
         .macro  get_irqnr_preamble, base, tmp
         .endm
 
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
-
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 
                 mov     \base, #AIC_BA
@@ -27,8 +24,3 @@
                 cmp     \irqnr, #0
 
         .endm
-
-        /* currently don't need an disable_fiq macro */
-
-        .macro  disable_fiq
-        .endm
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb931161..00000000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
deleted file mode 100644
index d621fb73256..00000000000
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-zynq/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros
- *
- *  Copyright (C) 2011 Xilinx
- *
- * based on arch/plat-mxc/include/mach/entry-macro.S
- *
- *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-                .macro  disable_fiq
-                .endm
-
-                .macro  arch_ret_to_user, tmp1, tmp2
-                .endm
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b8d2b..00000000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
deleted file mode 100644
index def5d30cb67..00000000000
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-        .macro  disable_fiq
-        .endm
-
-        .macro  arch_ret_to_user, tmp1, tmp2
-        .endm
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df2e86..00000000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd74b12..00000000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-        cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda8b66..32a09931350 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/regs-clock.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
 
@@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
         return __raw_readl(S3C2410_GSTATUS1);
 }
 
+static void s3c24xx_default_idle(void)
+{
+        unsigned long tmp;
+        int i;
+
+        /* idle the system by using the idle mode which will wait for an
+         * interrupt to happen before restarting the system.
+         */
+
+        /* Warning: going into idle state upsets jtag scanning */
+
+        __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+                     S3C2410_CLKCON);
+
+        /* the samsung port seems to do a loop and then unset idle.. */
+        for (i = 0; i < 50; i++)
+                tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+        /* this bit is not cleared on re-start... */
+
+        __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+                     S3C2410_CLKCON);
+}
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
+        arm_pm_idle = s3c24xx_default_idle;
+
         /* initialise the io descriptors we need for initialisation */
         iotable_init(mach_desc, size);
         iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83b44c..00000000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-        /*
-         * This should do all the clock switching
-         * and wait for interrupt tricks
-         */
-        cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */