1 files changed, 23 insertions, 23 deletions

diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 429ecafe9fd..e43b39cc7fe 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -190,7 +190,7 @@ err_free_1:
  * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
  * single GPIO line and are compatible with the leds-gpio driver.
  *
- * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
  * in the following array:
  *
  * SATAx blue LED | SATAx activity | LED state
@@ -339,28 +339,28 @@ static struct platform_device net2big_gpio_buttons = {
  * General Setup
  ****************************************************************************/
 
-static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
-        {  0, MPP_GPIO },       /* Raid mode (bit 0) */
-        {  1, MPP_GPIO },       /* USB port 2 fuse (0 = Fail, 1 = Ok) */
-        {  2, MPP_GPIO },       /* Raid mode (bit 1) */
-        {  3, MPP_GPIO },       /* Board ID (bit 0) */
-        {  4, MPP_GPIO },       /* Fan activity (0 = Off, 1 = On) */
-        {  5, MPP_GPIO },       /* Fan fail detection */
-        {  6, MPP_GPIO },       /* Red front LED (0 = Off, 1 = On) */
-        {  7, MPP_GPIO },       /* Disable initial blinking on front LED */
-        {  8, MPP_GPIO },       /* Rear power switch (on|auto) */
-        {  9, MPP_GPIO },       /* Rear power switch (auto|off) */
-        { 10, MPP_GPIO },       /* SATA 1 red LED (0 = Off, 1 = On) */
-        { 11, MPP_GPIO },       /* SATA 0 red LED (0 = Off, 1 = On) */
-        { 12, MPP_GPIO },       /* Board ID (bit 1) */
-        { 13, MPP_GPIO },       /* SATA 1 blue LED blink control */
-        { 14, MPP_SATA_LED },
-        { 15, MPP_SATA_LED },
-        { 16, MPP_GPIO },       /* Blue front LED control */
-        { 17, MPP_GPIO },       /* SATA 0 blue LED blink control */
-        { 18, MPP_GPIO },       /* Front button (0 = Released, 1 = Pushed ) */
-        { 19, MPP_GPIO },       /* SATA{0,1} power On/Off request */
-        { -1 }
+static unsigned int net2big_mpp_modes[] __initdata = {
+        MPP0_GPIO,      /* Raid mode (bit 0) */
+        MPP1_GPIO,      /* USB port 2 fuse (0 = Fail, 1 = Ok) */
+        MPP2_GPIO,      /* Raid mode (bit 1) */
+        MPP3_GPIO,      /* Board ID (bit 0) */
+        MPP4_GPIO,      /* Fan activity (0 = Off, 1 = On) */
+        MPP5_GPIO,      /* Fan fail detection */
+        MPP6_GPIO,      /* Red front LED (0 = Off, 1 = On) */
+        MPP7_GPIO,      /* Disable initial blinking on front LED */
+        MPP8_GPIO,      /* Rear power switch (on|auto) */
+        MPP9_GPIO,      /* Rear power switch (auto|off) */
+        MPP10_GPIO,     /* SATA 1 red LED (0 = Off, 1 = On) */
+        MPP11_GPIO,     /* SATA 0 red LED (0 = Off, 1 = On) */
+        MPP12_GPIO,     /* Board ID (bit 1) */
+        MPP13_GPIO,     /* SATA 1 blue LED blink control */
+        MPP14_SATA_LED,
+        MPP15_SATA_LED,
+        MPP16_GPIO,     /* Blue front LED control */
+        MPP17_GPIO,     /* SATA 0 blue LED blink control */
+        MPP18_GPIO,     /* Front button (0 = Released, 1 = Pushed ) */
+        MPP19_GPIO,     /* SATA{0,1} power On/Off request */
+        0,
         /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
         /* 23: SATA 0 power status */
         /* 24: Board power off */