8 files changed, 205 insertions, 37 deletions

diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index f3f37f141db..971d1c0c83e 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -144,7 +144,7 @@ usage should require reading the full document.
         this though and the recommendation to allow only a single
         interface in STA mode at first!
       </para>
-!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_vif
     </chapter>
 
     <chapter id="rx-tx">
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 0a46833c1b7..2f93ac06c41 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -88,27 +88,6 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
-What:   CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
-When:   March 2010 / desktop catchup
-
-Why:    The old regulatory infrastructure has been replaced with a new one
-        which does not require statically defined regulatory domains. We do
-        not want to keep static regulatory domains in the kernel due to the
-        the dynamic nature of regulatory law and localization. We kept around
-        the old static definitions for the regulatory domains of:
-
-                * US
-                * JP
-                * EU
-
-        and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
-        set. We will remove this option once the standard Linux desktop catches
-        up with the new userspace APIs we have implemented.
-
-Who:    Luis R. Rodriguez <lrodriguez@atheros.com>
-
----------------------------
-
 What:   dev->power.power_state
 When:   July 2007
 Why:    Broken design for runtime control over driver power states, confusing
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 5fe8de5cc72..f172091fb7c 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -149,10 +149,11 @@ char *(*procinfo)(struct capi_ctr *ctrlr)
         pointer to a callback function returning the entry for the device in
         the CAPI controller info table, /proc/capi/controller
 
-read_proc_t *ctr_read_proc
-        pointer to the read_proc callback function for the device's proc file
-        system entry, /proc/capi/controllers/<n>; will be called with a
-        pointer to the device's capi_ctr structure as the last (data) argument
+const struct file_operations *proc_fops
+        pointers to callback functions for the device's proc file
+        system entry, /proc/capi/controllers/<n>; pointer to the device's
+        capi_ctr structure is available from struct proc_dir_entry::data
+        which is available from struct inode.
 
 Note: Callback functions except send_message() are never called in interrupt
 context.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 006b39dec87..2dc7a1d9768 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -692,6 +692,25 @@ proxy_arp - BOOLEAN
         conf/{all,interface}/proxy_arp is set to TRUE,
         it will be disabled otherwise
 
+proxy_arp_pvlan - BOOLEAN
+        Private VLAN proxy arp.
+        Basically allow proxy arp replies back to the same interface
+        (from which the ARP request/solicitation was received).
+
+        This is done to support (ethernet) switch features, like RFC
+        3069, where the individual ports are NOT allowed to
+        communicate with each other, but they are allowed to talk to
+        the upstream router.  As described in RFC 3069, it is possible
+        to allow these hosts to communicate through the upstream
+        router by proxy_arp'ing. Don't need to be used together with
+        proxy_arp.
+
+        This technology is known by different names:
+          In RFC 3069 it is called VLAN Aggregation.
+          Cisco and Allied Telesyn call it Private VLAN.
+          Hewlett-Packard call it Source-Port filtering or port-isolation.
+          Ericsson call it MAC-Forced Forwarding (RFC Draft).
+
 shared_media - BOOLEAN
         Send(router) or accept(host) RFC1620 shared media redirects.
         Overrides ip_secure_redirects.
@@ -833,9 +852,18 @@ arp_notify - BOOLEAN
             or hardware address changes.
 
 arp_accept - BOOLEAN
-        Define behavior when gratuitous arp replies are received:
-        0 - drop gratuitous arp frames
-        1 - accept gratuitous arp frames
+        Define behavior for gratuitous ARP frames who's IP is not
+        already present in the ARP table:
+        0 - don't create new entries in the ARP table
+        1 - create new entries in the ARP table
+
+        Both replies and requests type gratuitous arp will trigger the
+        ARP table to be updated, if this setting is on.
+
+        If the ARP table already contains the IP address of the
+        gratuitous arp frame, the arp table will be updated regardless
+        if this setting is on or off.
+
 
 app_solicit - INTEGER
         The maximum number of probes to send to the user space ARP daemon
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
new file mode 100755
index 00000000000..19015de6725
--- /dev/null
+++ b/Documentation/networking/ixgbevf.txt
@@ -0,0 +1,90 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+November 24, 2009
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+In This Release
+===============
+
+This file describes the ixgbevf Linux* Base Driver for Intel Network
+Connection.
+
+The ixgbevf driver supports 82599-based virtual function devices that can only
+be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The ixgbevf driver supports virtual functions generated by the ixgbe driver
+with a max_vfs value of 1 or greater.
+
+The guest OS loading the ixgbevf driver must support MSI-X interrupts.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/network/sb/CS-008441.htm
+
+Known Issues/Troubleshooting
+============================
+
+  Unloading Physical Function (PF) Driver Causes System Reboots When VM is
+  Running and VF is Loaded on the VM
+  ------------------------------------------------------------------------
+  Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
+
+License
+=======
+
+Intel 10 Gigabit Linux driver.
+Copyright(c) 1999 - 2009 Intel Corporation.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.
+
+This program is distributed in the hope it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+The full GNU General Public License is included in this distribution in
+the file called "COPYING".
+
+Trademarks
+==========
+
+Intel, Itanium, and Pentium are trademarks or registered trademarks of
+Intel Corporation or its subsidiaries in the United States and other
+countries.
+
+* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index ee31369e9e5..9551622d0a7 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -188,3 +188,27 @@ Then in some part of your code after your wiphy has been registered:
                        &mydriver_jp_regdom.reg_rules[i],
                        sizeof(struct ieee80211_reg_rule));
         regulatory_struct_hint(rd);
+
+Statically compiled regulatory database
+---------------------------------------
+
+In most situations the userland solution using CRDA as described
+above is the preferred solution.  However in some cases a set of
+rules built into the kernel itself may be desirable.  To account
+for this situation, a configuration option has been provided
+(i.e. CONFIG_CFG80211_INTERNAL_REGDB).  With this option enabled,
+the wireless database information contained in net/wireless/db.txt is
+used to generate a data structure encoded in net/wireless/regdb.c.
+That option also enables code in net/wireless/reg.c which queries
+the data in regdb.c as an alternative to using CRDA.
+
+The file net/wireless/db.txt should be kept up-to-date with the db.txt
+file available in the git repository here:
+
+    git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git
+
+Again, most users in most situations should be using the CRDA package
+provided with their distribution, and in most other situations users
+should be building and using CRDA on their own rather than using
+this option.  If you are not absolutely sure that you should be using
+CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_.
diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 00000000000..2fa4fcd38fd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+                           are: "ip" for ip bus clock
+                                 "ref" for reference clock (XTAL)
+                           "ref" is default in case this property is not
+                           present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+                           are: "ip" for ip bus clock
+                                "ref" for reference clock
+                                "sys" for system clock
+                           If this property is not present, an optimal CAN
+                           clock source and frequency based on the system
+                           clock will be selected. If this is not possible,
+                           the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+                           clock divider can be specified. By default, a
+                           value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+        can@1300 {
+                compatible = "fsl,mpc5121-mscan";
+                interrupts = <12 0x8>;
+                interrupt-parent = <&ipic>;
+                reg = <0x1300 0x80>;
+        };
+
+        can@1380 {
+                compatible = "fsl,mpc5121-mscan";
+                interrupts = <13 0x8>;
+                interrupt-parent = <&ipic>;
+                reg = <0x1380 0x80>;
+                fsl,mscan-clock-source = "ref";
+                fsl,mscan-clock-divider = <3>;
+        };
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index 5c6602dbfdc..4ccb2cd5df9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -195,11 +195,4 @@ External interrupts:
 
 fsl,mpc5200-mscan nodes
 -----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
-                          are:  "ip" for ip bus clock
-                                "ref" for reference clock (XTAL)
-                          "ref" is default in case this property is not
-                          present.
+See file can.txt in this directory.