mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCs

CMD23 causes lots of errors in kernel on some freescale SoCs
(P1020, P1021, P1022, P1024, P1025 and P4080) when MMC card used,
which is because these controllers does not support CMD23,
even on the SoCs which declares CMD23 is supported.
Therefore, we'll not use CMD23.

Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

4 files changed, 22 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c
index ae5fcbfa1ee..63d219f57ca 100644
--- a/drivers/mmc/host/sdhci-of-esdhc.c
+++ b/drivers/mmc/host/sdhci-of-esdhc.c
@@ -169,6 +169,16 @@ static void esdhc_of_resume(struct sdhci_host *host)
 }
 #endif
 
+static void esdhc_of_platform_init(struct sdhci_host *host)
+{
+        u32 vvn;
+
+        vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
+        vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
+        if (vvn == VENDOR_V_22)
+                host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
+}
+
 static struct sdhci_ops sdhci_esdhc_ops = {
         .read_l = esdhc_readl,
         .read_w = esdhc_readw,
@@ -180,6 +190,7 @@ static struct sdhci_ops sdhci_esdhc_ops = {
         .enable_dma = esdhc_of_enable_dma,
         .get_max_clock = esdhc_of_get_max_clock,
         .get_min_clock = esdhc_of_get_min_clock,
+        .platform_init = esdhc_of_platform_init,
 #ifdef CONFIG_PM
         .platform_suspend = esdhc_of_suspend,
         .platform_resume = esdhc_of_resume,
diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c
index 65551a9709c..27164457f86 100644
--- a/drivers/mmc/host/sdhci-pltfm.c
+++ b/drivers/mmc/host/sdhci-pltfm.c
@@ -150,6 +150,13 @@ struct sdhci_host *sdhci_pltfm_init(struct platform_device *pdev,
                 goto err_remap;
         }
 
+        /*
+         * Some platforms need to probe the controller to be able to
+         * determine which caps should be used.
+         */
+        if (host->ops && host->ops->platform_init)
+                host->ops->platform_init(host);
+
         platform_set_drvdata(pdev, host);
 
         return host;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7922adb4238..f05a37747b3 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2837,6 +2837,9 @@ int sdhci_add_host(struct sdhci_host *host)
         if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
                 mmc->caps |= MMC_CAP_4_BIT_DATA;
 
+        if (host->quirks2 & SDHCI_QUIRK2_HOST_NO_CMD23)
+                mmc->caps &= ~MMC_CAP_CMD23;
+
         if (caps[0] & SDHCI_CAN_DO_HISPD)
                 mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 97653ea8942..71a4a7ed46c 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -278,6 +278,7 @@ struct sdhci_ops {
         void    (*hw_reset)(struct sdhci_host *host);
         void    (*platform_suspend)(struct sdhci_host *host);
         void    (*platform_resume)(struct sdhci_host *host);
+        void    (*platform_init)(struct sdhci_host *host);
 };
 
 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS