litmus-rt-tegra.git/include, branch master

Added missing tegra files.

2013-01-22T15:38:37+00:00

Patched in Tegra support.

2013-01-17T21:15:55+00:00

Merge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2013-01-14T18:56:05+00:00

Pull sound fixes from Takashi Iwai:
 "Most of commits found here are for ASoC device specific fixes,
  arizona, cs4271, wm5102, wm2200, etc, in addition to a couple of
  memory leak fixes in ASoC core.

  Other than that, regression fixes in HD-audio and USB-audio, and a fix
  for new Realtek codecs."

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: usb-audio: Fix NULL dereference by access to non-existing substream
  ALSA: hda - Add support of new codec ALC284
  ALSA: usb-audio: Make ebox44_table static
  ALSA: hdspm - Fix wordclock status on AES32
  Revert "ALSA: hda - Shut up pins at power-saving mode with Conexnat codecs"
  ALSA: hda - Disable runtime D3 for Intel CPT & co
  ALSA: pxa27x: fix ac97 warm reset
  ALSA: pxa27x: fix ac97 cold reset
  ASoC: wm_adsp: Ensure that block writes are from DMA aligned addresses
  ASoC: wm2000: Fix sense of speech clarity enable
  ASoC: wm5100: Remove DSP B and left justified formats
  ASoC: arizona: Remove DSP B and left justified AIF modes
  ASoC: wm2200: Remove DSP B and left justified AIF modes
  ASoC: wm5102: Improve speaker enable performance
  ASoC: core: fix the memory leak in case of remove_aux_dev()
  ASoC: core: fix the memory leak in case of device_add() failure
  ASoC: cs42l52: Catch no-match case in cs42l52_get_clk
  ASoC: lm49453: Update lm49453_reg_defs values as per LM49453 HW revision-B
  ASoC: lm49453: Fix adc, mic and sidetone volume ranges
  ASoC: arizona: Correct FLL source definitions
  ...

Merge tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2013-01-14T17:07:11+00:00

Pull driver core fixes from Greg Kroah-Hartman:
 "Here are two patches for 3.8-rc3.

  One removes the __dev* defines from init.h now that all usages of it
  are gone from your tree.  The other fix is for debugfs's paramater
  that was using the wrong base for the option.

  Signed-off-by: Greg Kroah-Hartman "

* tag 'driver-core-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  debugfs: convert gid= argument from decimal, not octal
  Remove __dev* markings from init.h

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2013-01-14T16:27:10+00:00

Pull networking fixes from David Miller:

 1) Fix regression allowing IP_TTL setting of zero, fix from Cong Wang.

 2) Fix leak regressions in tunap, from Jason Wang.

 3) be2net driver always returns IRQ_HANDLED in INTx handler, fix from
    Sathya Perla.

 4) qlge doesn't really support NETIF_F_TSO6, don't set that flag.  Fix
    from Amerigo Wang.

 5) Add 802.11ad Atheros wil6210 driver, from Vladimir Kondratiev.

 6) Fix MTU calculations in mac80211 layer, from T Krishna Chaitanya.

 7) Station info layer of mac80211 needs to use del_timer_sync(), from
    Johannes Berg.

 8) tcp_read_sock() can loop forever, because we don't immediately stop
    when recv_actor() returns zero.  Fix from Eric Dumazet.

 9) Fix WARN_ON() in tcp_cleanup_rbuf().  We have to use sk_eat_skb() in
    tcp_recv_skb() to handle the case where a large GRO packet is split
    up while it is use by a splice() operation.  Fix also from Eric
    Dumazet.

10) addrconf_get_prefix_route() in ipv6 tests flags incorrectly, it
    does:

        if (X && (p->flags & Y) != 0)

    when it really meant to go:

        if (X && (p->flags & X) != 0)

    fix from Romain Kuntz.

11) Fix lost Kconfig dependency for bfin_mac driver hardware
    timestamping.  From Lars-Peter Clausen.

12) Fix regression in handling of RST without ACK in TCP, from Eric
    Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (37 commits)
  be2net: fix unconditionally returning IRQ_HANDLED in INTx
  tuntap: fix leaking reference count
  tuntap: forbid calling TUNSETIFF when detached
  tuntap: switch to use rtnl_dereference()
  net, wireless: overwrite default_ethtool_ops
  qlge: remove NETIF_F_TSO6 flag
  tcp: accept RST without ACK flag
  net: ethernet: xilinx: Do not use NO_IRQ in axienet
  net: ethernet: xilinx: Do not use axienet on PPC
  bnx2x: Allow management traffic after boot from SAN
  bnx2x: Fix fastpath structures when memory allocation fails
  bfin_mac: Restore hardware time-stamping dependency on BF518
  tun: avoid owner checks on IFF_ATTACH_QUEUE
  bnx2x: move debugging code before the return
  tuntap: refuse to re-attach to different tun_struct
  ipv6: use addrconf_get_prefix_route for prefix route lookup [v2]
  ipv6: fix the noflags test in addrconf_get_prefix_route
  tcp: fix splice() and tcp collapsing interaction
  tcp: splice: fix an infinite loop in tcp_read_sock()
  net: prevent setting ttl=0 via IP_TTL
  ...

net, wireless: overwrite default_ethtool_ops

2013-01-11T23:55:48+00:00

Since:

commit 2c60db037034d27f8c636403355d52872da92f81
Author: Eric Dumazet 
Date:   Sun Sep 16 09:17:26 2012 +0000

    net: provide a default dev->ethtool_ops

wireless core does not correctly assign ethtool_ops.

After alloc_netdev*() call, some cfg80211 drivers provide they own
ethtool_ops, but some do not. For them, wireless core provide generic
cfg80211_ethtool_ops, which is assigned in NETDEV_REGISTER notify call:

        if (!dev->ethtool_ops)
                dev->ethtool_ops = &cfg80211_ethtool_ops;

But after Eric's commit, dev->ethtool_ops is no longer NULL (on cfg80211
drivers without custom ethtool_ops), but points to &default_ethtool_ops.

In order to fix the problem, provide function which will overwrite
default_ethtool_ops and use it by wireless core.

Signed-off-by: Stanislaw Gruszka 
Acked-by: Johannes Berg 
Acked-by: Ben Hutchings 
Signed-off-by: David S. Miller

Merge branch 'akpm' (incoming fixes from Andrew)

2013-01-11T22:55:15+00:00

Merge misc fixes from Andrew Morton:
 "The audit fixes have been floating around for a while - Al and Eric
  aren't responding to either myself or Kees so I asked Kees to
  re-review them and here they are."

* emailed patches from Andrew Morton : (22 commits)
  lib/rbtree.c: avoid the use of non-static __always_inline
  MAINTAINERS: Omar had moved
  mm: compaction: partially revert capture of suitable high-order page
  linux/audit.h: move ptrace.h include to kernel header
  kernel/audit.c: avoid negative sleep durations
  audit: catch possible NULL audit buffers
  audit: create explicit AUDIT_SECCOMP event type
  MAINTAINERS: fix a status pattern
  MAINTAINERS: fix arch/arm/plat-omap/include/plat/omap_hwmod.h
  mm: thp: acquire the anon_vma rwsem for write during split
  mm: mmap: annotate vm_lock_anon_vma locking properly for lockdep
  lockdep, rwsem: provide down_write_nest_lock()
  arch/mn10300/Kconfig: select CONFIG_GENERIC_ATOMIC64
  mm: bootmem: fix free_all_bootmem_core() with odd bitmap alignment
  mm: use aligned zone start for pfn_to_bitidx calculation
  fs/exec.c: work around icc miscompilation
  mm: compaction: fix echo 1 > compact_memory return error issue
  mm: memblock: fix wrong memmove size in memblock_merge_regions()
  drivers/video/ssd1307fb.c: fix bit order bug in the byte translation function
  mm: migrate: check page_count of THP before migrating
  ...

lib/rbtree.c: avoid the use of non-static __always_inline

2013-01-11T22:54:56+00:00

lib/rbtree.c declared __rb_erase_color() as __always_inline void, and
then exported it with EXPORT_SYMBOL.

This was because __rb_erase_color() must be exported for augmented
rbtree users, but it must also be inlined into rb_erase() so that the
dummy callback can get optimized out of that call site.

(Actually with a modern compiler, none of the dummy callback functions
should even be generated as separate text functions).

The above usage is legal C, but it was unusual enough for some compilers
to warn about it.  This change makes things more explicit, with a static
__always_inline ____rb_erase_color function for use in rb_erase(), and a
separate non-inline __rb_erase_color function for use in
rb_erase_augmented call sites.

Signed-off-by: Michel Lespinasse 
Reported-by: Wu Fengguang 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

mm: compaction: partially revert capture of suitable high-order page

2013-01-11T22:54:56+00:00

Eric Wong reported on 3.7 and 3.8-rc2 that ppoll() got stuck when
waiting for POLLIN on a local TCP socket.  It was easier to trigger if
there was disk IO and dirty pages at the same time and he bisected it to
commit 1fb3f8ca0e92 ("mm: compaction: capture a suitable high-order page
immediately when it is made available").

The intention of that patch was to improve high-order allocations under
memory pressure after changes made to reclaim in 3.6 drastically hurt
THP allocations but the approach was flawed.  For Eric, the problem was
that page->pfmemalloc was not being cleared for captured pages leading
to a poor interaction with swap-over-NFS support causing the packets to
be dropped.  However, I identified a few more problems with the patch
including the fact that it can increase contention on zone->lock in some
cases which could result in async direct compaction being aborted early.

In retrospect the capture patch took the wrong approach.  What it should
have done is mark the pageblock being migrated as MIGRATE_ISOLATE if it
was allocating for THP and avoided races that way.  While the patch was
showing to improve allocation success rates at the time, the benefit is
marginal given the relative complexity and it should be revisited from
scratch in the context of the other reclaim-related changes that have
taken place since the patch was first written and tested.  This patch
partially reverts commit 1fb3f8ca0e92 ("mm: compaction: capture a
suitable high-order page immediately when it is made available").

Reported-and-tested-by: Eric Wong 
Tested-by: Eric Dumazet 
Cc: 
Signed-off-by: Mel Gorman 
Cc: David Miller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

linux/audit.h: move ptrace.h include to kernel header

2013-01-11T22:54:56+00:00

While the kernel internals want pt_regs (and so it includes
linux/ptrace.h), the user version of audit.h does not need it.  So move
the include out of the uapi version.

This avoids issues where people want the audit defines and userland
ptrace api.  Including both the kernel ptrace and the userland ptrace
headers can easily lead to failure.

Signed-off-by: Mike Frysinger 
Cc: Eric Paris 
Cc: Al Viro 
Reviewed-by: Kees Cook 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds