config SGX540
	tristate "PowerVR SGX"
	depends on ARCH_OMAP4
	---help---
	  Support for the PowerVR SGX 3D core.

config SGX530
	tristate "PowerVR SGX"
	depends on ARCH_OMAP3
	---help---
	  Support for the PowerVR SGX 3D core.

config VIRTUAL_DISPLAY_SUPPORT
	tristate "Virtual display support"
	depends on SGX540
	---help---
	  Support for showing one framebuffer split in 2 displays at the same
	  time. Each display will show a part of the framebuffer by updating
	  the corresponding overlay on each display. This feature requires
	  2 framebuffers so CONFIG_FB_OMAP2_NUM_FBS must be 2 and each
	  framebuffer must be initialized correctly.
	  The current implementation supports only panels of the same X and Y
	  resolutions and both panels must have the same bits per pixel values.
	  This feature is EXPERIMENTAL and might not be stable if power
	  management is added at the moment.
	  It is important to give enough memory to FB0 to allow at least
	  one buffer with twice the height of a normal single display buffer,
	  so if the panel needs 864x480x4 bytes for one single display buffer
	  you must give twice the size which is 864x960x4 with the bootargs
	  omapfb.vram='0:4M'. To enable double buffering you need to give
	  864x960x4x2 bytes for two buffers, the bootargs should have
	  omapfb.vram='0:8M'. Since FB1 must also be initialized properly be
	  sure to left enough memory for one single buffer (864x480x4 bytes).
	  The bootarg 'vram' must have the FB0 and FB1 memory requirements
	  combined. Example:
	  If you want FB0 with 4M (no double buffering) and FB1 with 2M, the
	  bootargs must have the following:
	  vram='6M' omapfb.vram='0:4M,1:2M'

choice
	prompt "SGX revision"
	depends on SGX530
	default SGX_REV125

config SGX_REV121
       bool "Revision 1.2.1 - Omap 3430"

config SGX_REV125
	bool "Revision 1.2.5 - Omap 3630"

endchoice

choice
	prompt "SGX revision"
	depends on SGX540
	default SGX_REV120

config SGX_REV110
       bool "Revision 1.1.0 - Omap 4430 ES1"

config SGX_REV120
       bool "Revision 1.2.0 - Omap 4430 ES2"

endchoice

choice
	prompt "PowerVR build type"
	depends on SGX530
	default SGX_530_BUILD_RELEASE

config SGX_530_BUILD_RELEASE
       bool "SGX530 RELEASE"

config SGX_530_BUILD_DEBUG
       bool "SGX530 DEBUG"

endchoice

choice
	prompt "PowerVR build type"
	depends on SGX540
	default SGX_540_BUILD_RELEASE

config SGX_540_BUILD_RELEASE
       bool "SGX540 RELEASE"

config SGX_540_BUILD_DEBUG
       bool "SGX540 DEBUG"

endchoice

config SGX_PDUMP
	depends on SGX530 || SGX540
	bool "PowerVR SGX Parameter Dump"
	---help---
	  This option enables the PDump (Parameter Dump) build to debug
	  the SGX driver. The user side of the driver must be built with
	  this option enabled as well