aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
...
* rtlwifi: rtl8192ce: Fix loss of receive performanceJingjun Wu2012-04-05
| | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit a9b89e2567c743483e6354f64d7a7e3a8c101e9e upstream. Driver rtl8192ce when used with the RTL8188CE device would start at about 20 Mbps on a 54 Mbps connection, but quickly drop to 1 Mbps. One of the symptoms is that the AP would need to retransmit each packet 4 of 5 times before the driver would acknowledge it. Recovery is possible only by unloading and reloading the driver. This problem was reported at https://bugzilla.redhat.com/show_bug.cgi?id=770207. The problem is due to a missing update of the gain setting. Signed-off-by: Jingjun Wu <jingjun_wu@realsil.com.cn> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: rtl8192c: Prevent sleeping from invalid context in rtl8192cuLarry Finger2012-04-05
| | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit ebecdcc12fed5d3c81853dea61a0a78a5aefab52 upstream. When driver rtl8192cu is used with the debug level set to 3 or greater, the result is "sleeping function called from invalid context" due to an rcu_read_lock() call in the DM refresh routine in driver rtl8192c. This lock is not necessary as the USB driver does not use the struct being protected, thus the lock is set only when a PCI interface is active. This bug is reported in https://bugzilla.kernel.org/show_bug.cgi?id=42775. Reported-by: Ronald Wahl <ronald.wahl@raritan.com> Tested-by: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rtlwifi: Handle previous allocation failures when freeing device memorySimon Graham2012-04-05
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 7f66c2f93e5779625c10d262c84537427a2673ca upstream. Handle previous allocation failures when freeing device memory Signed-off-by: Simon Graham <simon.graham@virtualcomputer.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* rt2x00: Add support for D-Link DWA-127 to rt2800usb.Gertjan van Wingerde2012-04-05
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit d42a179b941a9e4cc6cf41d0f3cbadd75fc48a89 upstream. This is an RT3070 based device. Reported-by: Mikhail Kryshen <mikhail@kryshen.net> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: mos7840: Fixed MCS7820 device attach problemDonald Lee2012-04-05
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 093ea2d3a766cb8a4c4de57efec6c0a127a58792 upstream. A MCS7820 device supports two serial ports and a MCS7840 device supports four serial ports. Both devices use the same driver, but the attach function in driver was unable to correctly handle the port numbers for MCS7820 device. This problem has been fixed in this patch and this fix has been verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices. Signed-off-by: Donald Lee <donald@asix.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cp210x: Update to support CP2105 and multiple interface devicesPreston Fick2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit a5360a53a7ccad5ed9ccef210b94fef13c6e5529 upstream. This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS deviceScott Dial2012-04-05
| | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 6d161b99f875269ad4ffa44375e1e54bca6fd02e upstream. This patch adds new device IDs to the ftdi_sio module to support the new Sealevel SeaLINK+8 2038-ROHS device. Signed-off-by: Scott Dial <scott.dial@scientiallc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: qcserial: don't grab QMI port on Gobi 1000 devicesDan Williams2012-04-05
| | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit c192c8e71a2ded01170c1a992cd21aaedc822756 upstream. Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: qcserial: add several new serial devicesThomas Tuttle2012-04-05
| | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 2db4d87070e87d198ab630e66a898b45eff316d9 upstream. Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Fix build error due to dma_mask is not at pdev_archdata at ARMPeter Chen2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream. When build i.mx platform with imx_v6_v7_defconfig, and after adding USB Gadget support, it has below build error: CC drivers/usb/host/fsl-mph-dr-of.o drivers/usb/host/fsl-mph-dr-of.c: In function 'fsl_usb2_device_register': drivers/usb/host/fsl-mph-dr-of.c:97: error: 'struct pdev_archdata' has no member named 'dma_mask' It has discussed at: http://www.spinics.net/lists/linux-usb/msg57302.html For PowerPC, there is dma_mask at struct pdev_archdata, but there is no dma_mask at struct pdev_archdata for ARM. The pdev_archdata is related to specific platform, it should NOT be accessed by cross platform drivers, like USB. The code for pdev_archdata should be useless, as for PowerPC, it has already gotten the value for pdev->dev.dma_mask at function arch_setup_pdev_archdata of arch/powerpc/kernel/setup-common.c. Tested-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: fsl_udc_core: Fix scheduling while atomic dump messagePeter Chen2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit c5cc5ed86667d4ae74fe40ee4ed893f4b46aba05 upstream. When loading g_ether gadget, there is below message: Backtrace: [<80012248>] (dump_backtrace+0x0/0x10c) from [<803cb42c>] (dump_stack+0x18/0x1c) r7:00000000 r6:80512000 r5:8052bef8 r4:80513f30 [<803cb414>] (dump_stack+0x0/0x1c) from [<8000feb4>] (show_regs+0x44/0x50) [<8000fe70>] (show_regs+0x0/0x50) from [<8004c840>] (__schedule_bug+0x68/0x84) r5:8052bef8 r4:80513f30 [<8004c7d8>] (__schedule_bug+0x0/0x84) from [<803cd0e4>] (__schedule+0x4b0/0x528) r5:8052bef8 r4:809aad00 [<803ccc34>] (__schedule+0x0/0x528) from [<803cd214>] (_cond_resched+0x44/0x58) [<803cd1d0>] (_cond_resched+0x0/0x58) from [<800a9488>] (dma_pool_alloc+0x184/0x250) r5:9f9b4000 r4:9fb4fb80 [<800a9304>] (dma_pool_alloc+0x0/0x250) from [<802a8ad8>] (fsl_req_to_dtd+0xac/0x180) [<802a8a2c>] (fsl_req_to_dtd+0x0/0x180) from [<802a8ce4>] (fsl_ep_queue+0x138/0x274) [<802a8bac>] (fsl_ep_queue+0x0/0x274) from [<7f004328>] (composite_setup+0x2d4/0xfac [g_ether]) [<7f004054>] (composite_setup+0x0/0xfac [g_ether]) from [<802a9bb4>] (fsl_udc_irq+0x8dc/0xd38) [<802a92d8>] (fsl_udc_irq+0x0/0xd38) from [<800704f8>] (handle_irq_event_percpu+0x54/0x188) [<800704a4>] (handle_irq_event_percpu+0x0/0x188) from [<80070674>] (handle_irq_event+0x48/0x68) [<8007062c>] (handle_irq_event+0x0/0x68) from [<800738ec>] (handle_level_irq+0xb4/0x138) r5:80514f94 r4:80514f40 [<80073838>] (handle_level_irq+0x0/0x138) from [<8006ffa4>] (generic_handle_irq+0x38/0x44) r7:00000012 r6:80510b1c r5:80529860 r4:80512000 [<8006ff6c>] (generic_handle_irq+0x0/0x44) from [<8000f4c4>] (handle_IRQ+0x54/0xb4) [<8000f470>] (handle_IRQ+0x0/0xb4) from [<800085b8>] (tzic_handle_irq+0x64/0x94) r9:412fc085 r8:00000000 r7:80513f30 r6:00000001 r5:00000000 r4:00000000 [<80008554>] (tzic_handle_irq+0x0/0x94) from [<8000e680>] (__irq_svc+0x40/0x60) The reason of above dump message is calling dma_poll_alloc with can-schedule mem_flags at atomic context. To fix this problem, below changes are made: - fsl_req_to_dtd doesn't need to be protected by spin_lock_irqsave, as struct usb_request can be access at process context. Move lock to beginning of hardware visit (fsl_queue_td). - Change the memory flag which using to allocate dTD descriptor buffer, the memory flag can be from gadget layer. It is tested at i.mx51 bbg board with g_mass_storage, g_ether, g_serial. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: Don't clear WDM_READ unless entire read buffer is emptiedBen Hutchings2012-04-05
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit b7a205545345578712611106b371538992e142ff upstream. The WDM_READ flag is cleared later iff desc->length is reduced to 0. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: Fix more races on the read pathBen Hutchings2012-04-05
| | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 711c68b3c0f7a924ffbee4aa962d8f62b85188ff upstream. We must not allow the input buffer length to change while we're shuffling the buffer contents. We also mustn't clear the WDM_READ flag after more data might have arrived. Therefore move both of these into the spinlocked region at the bottom of wdm_read(). When reading desc->length without holding the iuspin lock, use ACCESS_ONCE() to ensure the compiler doesn't re-read it with inconsistent results. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: fix console error reportingJohan Hovold2012-04-05
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 548dd4b6da8a8e428453d55f7fa7b8a46498d147 upstream. Do not report errors in write path if port is used as a console as this may trigger the same error (and error report) resulting in a loop. Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: Wrong unicode value copied in con_set_unimap()Liz Clark2012-04-05
| | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 4a4c61b7ce26bfc9d49ea4bd121d52114bad9f99 upstream. Bugzilla 40012: PIO_UNIMAP bug: error updating Unicode-to-font map https://bugzilla.kernel.org/show_bug.cgi?id=40012 The unicode font map for the virtual console is a 32x32x64 table which allocates rows dynamically as entries are added. The unicode value increases sequentially and should count all entries even in empty rows. The defect is when copying the unicode font map in con_set_unimap(), the unicode value is not incremented properly. The wrong unicode value is entered in the new font map. Signed-off-by: Liz Clark <liz.clark@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: moxa: fix bit test in moxa_start()Dan Carpenter2012-04-05
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 58112dfbfe02d803566a2c6c8bd97b5fa3c62cdc upstream. This is supposed to be doing a shift before the comparison instead of just doing a bitwise AND directly. The current code means the start() just returns without doing anything. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: gadget: Make g_hid device class conform to spec.Orjan Friberg2012-04-05
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 33d2832ab0149a26418d360af3c444969a63fb28 upstream. HID devices should specify this in their interface descriptors, not in the device descriptor. This fixes a "missing hardware id" bug under Windows 7 with a VIA VL800 (3.0) controller. Signed-off-by: Orjan Friberg <of@flatfrog.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadgetfs: return number of bytes on ep0 read requestThomas Faber2012-04-05
| | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 85b4b3c8c189e0159101f7628a71411af072ff69 upstream. A read from GadgetFS endpoint 0 during the data stage of a control request would always return 0 on success (as returned by wait_event_interruptible) despite having written data into the user buffer. This patch makes it correctly set the return value to the number of bytes read. Signed-off-by: Thomas Faber <thfabba@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: Reselect index reg in interrupt contextSupriya Karanth2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 39287076e46d2c19aaceaa6f0a44168ae4d257ec upstream. musb INDEX register is getting modified/corrupted during temporary un-locking in a SMP system. Set this register with proper value after re-acquiring the lock Scenario: --------- CPU1 is handling a data transfer completion interrupt received for the CLASS1 EP CPU2 is handling a CLASS2 thread which is queuing data to musb for transfer Below is the error sequence: CPU1 | CPU2 -------------------------------------------------------------------- Data transfer completion inter- | rupt recieved. | | musb INDEX reg set to CLASS1 EP | | musb LOCK is acquired. | | | CLASS2 thread queues data. | | CLASS2 thread tries to acquire musb | LOCK but lock is already taken by | CLASS1, so CLASS2 thread is | spinning. | From Interrupt Context musb | giveback function is called | | The giveback function releases | CLASS2 thread now acquires LOCK LOCK | | ClASS1 Request's completion cal-| ClASS2 schedules the data transfer and lback is called | sets the MUSB INDEX to Class2 EP number | Interrupt handler for CLASS1 EP | tries to acquire LOCK and is | spinning | | Interrupt for Class1 EP acquires| Class2 completes the scheduling etc and the MUSB LOCK | releases the musb LOCK | Interrupt for Class1 EP schedul-| es the next data transfer | but musb INDEX register is still| set to CLASS2 EP | Since the MUSB INDEX register is set to a different endpoint, we read and modify the wrong registers. Hence data transfer will not happen properly. This results in unpredictable behavior So, the MUSB INDEX register is set to proper value again when interrupt re-acquires the lock Signed-off-by: Supriya Karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com> Reviewed-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* powerpc/usb: fix bug of kernel hang when initializing usbShengzhou Liu2012-04-05
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 28c56ea1431421dec51b7b229369e991481453df upstream. If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: new PID: LUMEL PD12Michał Wróbel2012-04-05
| | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 57e596f3af88ef52dea9640ed5e34ecd38893a02 upstream. Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: add support for FT-X series devicesJim Paris2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit dc0827c128c0ee5a58b822b99d662b59f4b8e970 upstream. Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices. Tested with a FT201X and FT230X at various baudrates (100 - 3000000). Sample dmesg: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver usb 2-1: new full-speed USB device number 6 using ohci_hcd usb 2-1: New USB device found, idVendor=0403, idProduct=6015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: FT230X USB Half UART usb 2-1: Manufacturer: FTDI usb 2-1: SerialNumber: DC001WI6 ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X usb 2-1: Number of endpoints 2 usb 2-1: Endpoint 1 MaxPacketSize 64 usb 2-1: Endpoint 2 MaxPacketSize 64 usb 2-1: Setting MaxPacketSize 64 drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: new PID: Distortec JTAG-lock-pickMichał Wróbel2012-04-05
| | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 47594d5528f28a4c025c2955c68104c75815637c upstream. Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.Bruno Thomsen2012-04-05
| | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit c1cee1d84001815a1b4321c49b995254c0df3100 upstream. Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs. A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways). Most likely the Hornby based their design on PIC18F87J50 Full Speed USB Demo Board. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: add support for BeagleBone rev A5+Peter Korsgaard2012-04-05
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 444aa7fa9bd752d19ce472d3e02558b987c3cc67 upstream. BeagleBone changed to the default FTDI 0403:6010 id in rev A5 to make life easier for Windows users, so we need a similar workaround as the Calao board to support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: fix problem when the manufacture is a NULL stringGreg Kroah-Hartman2012-04-05
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 656d2b3964a9d0f9864d472f8dfa2dd7dd42e6c0 upstream. On some misconfigured ftdi_sio devices, if the manufacturer string is NULL, the kernel will oops when the device is plugged in. This patch fixes the problem. Reported-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Tested-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add ZTE MF820DBjørn Mork2012-04-05
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 5889d3d4209c1050b4a3c96c41faf6c0976a4acf upstream. This device presents a total of 5 interfaces with ff/ff/ff class/subclass/protocol. The last one of these is verified to be a QMI/wwan combined interface which should be handled by the qmi_wwan driver, so we blacklist it here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: make interface blacklist work againBjørn Mork2012-04-05
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 963940cf472d76eca2d36296e461202cc6997352 upstream. commit 0d905fd "USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist" accidentally ANDed two blacklist tests by leaving out a return. This was not noticed because the two consecutive bracketless if statements made it syntactically correct. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option driver: adding support for Telit CC864-SINGLE, CC864-DUAL and ↵Daniele Palmas2012-04-05
| | | | | | | | | | | | | | DE910-DUAL modems BugLink: http://bugs.launchpad.net/bugs/971808 commit 7204cf584836c24b4b06e4ad4a8e6bb8ea84908e upstream. Adding PID for Telit CC864-SINGLE, CC864-DUAL and DE910-DUAL modems Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: Add MediaTek MT6276M modem&app interfacesMeng Zhang2012-04-05
| | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/971808 commit 0d8520a1d7f43328bc7085d4244d93c595064157 upstream. Add MEDIATEK products to Option driver Signed-off-by: Meng Zhang <meng.zhang@mediatek.com> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ASPM: Fix pcie devices with non-pcie childrenMatthew Garrett2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/961482 Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON. Some other systems using the pata_jmicron driver fail to boot because no disks are detected. Passing pcie_aspm=force on the kernel command line works around it. The cause: commit 4949be16822e ("PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to always return 0 if aspm is disabled, in order to avoid cases where we changed ASPM state on pre-PCIe 1.1 devices. This skipped the secondary function of pcie_aspm_sanity_check which was to avoid us enabling ASPM on devices that had non-PCIe children, causing trouble later on. Move the aspm_disabled check so we continue to honour that scenario. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and http://bugs.debian.org/665420 Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: stable@vger.kernel.org Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520 Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363 [jn: with more symptoms in log message] Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit c9651e70ad0aa499814817cbf3cc1d0b806ed3a1) Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* ACPICA: Fix regression in FADT revision checksJulian Anastasov2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/883441 commit 64b3db22c04586997ab4be46dd5a5b99f8a2d390 (2.6.39), "Remove use of unreliable FADT revision field" causes regression for old P4 systems because now cst_control and other fields are not reset to 0. The effect is that acpi_processor_power_init will notice cst_control != 0 and a write to CST_CNT register is performed that should not happen. As result, the system oopses after the "No _CST, giving up" message, sometimes in acpi_ns_internalize_name, sometimes in acpi_ns_get_type, usually at random places. May be during migration to CPU 1 in acpi_processor_get_throttling. Every one of these settings help to avoid this problem: - acpi=off - processor.nocst=1 - maxcpus=1 The fix is to update acpi_gbl_FADT.header.length after the original value is used to check for old revisions. https://bugzilla.kernel.org/show_bug.cgi?id=42700 https://bugzilla.redhat.com/show_bug.cgi?id=727865 Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> (cherry picked from commit 3e80acd1af40fcd91a200b0416a7616b20c5d647) Signed-off-by: Colin King <colin.king@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* UBUNTU: SAUCE: (no-up) remove __initdata from vesafb_fixTim Gardner2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/969309 OK. Then, I think we also want to fix these warnings probably introduced by commit a6021559 "UBUNTU: SAUCE: (no-up) Modularize vesafb". WARNING: drivers/video/vesafb.o(.exit.text+0x42): Section mismatch in reference from the function vesafb_remove() to the (unknown reference) .init.data:(unknown) The function __exit vesafb_remove() references a (unknown reference) __initdata (unknown). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __initdata annotation of (unknown) so it may be used outside an init section. WARNING: drivers/video/vesafb.o(.exit.text+0x4a): Section mismatch in reference from the function vesafb_remove() to the variable .init.data:vesafb_fix The function __exit vesafb_remove() references a variable __initdata vesafb_fix. This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __initdata annotation of vesafb_fix so it may be used outside an init section. Reported-by: Tetsuo Honda <from-ubuntu@I-love.SAKURA.ne.jp> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Signed-off-by: Andy Whitcroft <apw@canonical.com>
* UBUNTU: SAUCE (no-up) Quirk for enabling backlight hotkeys on Samsung N150PBrad Figg2012-04-05
| | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/875893 This patch is a very small part of a much larger patch that is upstream. I felt the full patch was too invasive to try to backport. (partial backport of upstream commit: a979e2e2af7d5b4bb3b20f6a716c627bb23a6753) Signed-off-by: Brad Figg <brad.figg@canonical.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* ata_piix: Add Toshiba Satellite Pro A120 to the quirks list due to broken ↵Benjamin Larsson2012-04-05
| | | | | | | | | | | | | suspend functionality. BugLink: http://bugs.launchpad.net/bugs/886850 Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> (cherry picked from commit b73fa4630e63e4d23407181c2bc0a54777bd0ce8) Signed-off-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Leann Ogasawara <leann.ogasawara@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* UBUNTU: SAUCE (no-up) Provide a param for allowing the BIOS to handle ↵Brad Figg2012-04-05
| | | | | | | | | | | | | | | changing the brightness on AC/battery status changes. BugLink: http://bugs.launchpad.net/bugs/949311 We currently carry a SAUCE patch which lets the OS handle the brightness levels automatically when connecting/disconnecting AC. There are some laptops (MSI Wind) for which this doesn't work. Provide a driver param which allows this behaviour to be overriden. Signed-off-by: Brad Figg <brad.figg@canonical.com> Acked-by: Colin King <colin.king@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* usermodehelper: use UMH_WAIT_PROC consistentlyOleg Nesterov2012-04-05
| | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/963685 A few call_usermodehelper() callers use the hardcoded constant instead of the proper UMH_WAIT_PROC, fix them. Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michal Januszewski <spock@gentoo.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> (back ported from commit 70834d3070c3f3015ab5c05176d54bd4a0100546) Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Stefan Bader <stefan.bader@canonical.com> Acked-by: Andy Whitcroft <andy.whitcroft@canonical.com>
* iwl3945: fix possible il->txq NULL pointer dereference in delayed worksStanislaw Gruszka2012-03-26
| | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/963823 commit 210787e82a0ac1ffb5d7be1c796f0c51050849ad upstream. On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* i2c-algo-bit: Fix spurious SCL timeouts under heavy loadVille Syrjala2012-03-26
| | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit 8ee161ce5e0cfc689eb677f227a6248191165fac upstream. When the system is under heavy load, there can be a significant delay between the getscl() and time_after() calls inside sclhi(). That delay may cause the time_after() check to trigger after SCL has gone high, causing sclhi() to return -ETIMEDOUT. To fix the problem, double check that SCL is still low after the timeout has been reached, before deciding to return -ETIMEDOUT. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* hwmon: (w83627ehf) Fix memory leak in probe functionGuenter Roeck2012-03-26
| | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit 32260d94408c553dca4ce54104edf79941a27536 upstream. The driver probe function leaked memory if creating the cpu0_vid attribute file failed. Fix by converting the driver to use devm_kzalloc. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776FGuenter Roeck2012-03-26
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit 33fa9b620409edfc71aa6cf01a51f990fbe46ab8 upstream. NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The correct registers were used to read FAN_STOP_TIME, but writes used the wrong registers. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* compat: Re-add missing asm/compat.h include to fix compile breakage on s390Jiri Slaby2012-03-26
| | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 For 3.0 stable kernel the backport of 048cd4e51d24ebf7f3552226d03c769d6ad91658 "compat: fix compile breakage on s390" breaks compilation... Re-add a single #include <asm/compat.h> in order to fix this. This patch is _not_ necessary for upstream, only for stable kernels which include the "build fix" mentioned above. One fix for arch/s390/kernel/setup.c was already sent and applied. But we need a similar patch for drivers/s390/char/fs3270.c. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* sfc: Fix assignment of ip_summed for pre-allocated skbsBen Hutchings2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit ff3bc1e7527504a93710535611b2f812f3bb89bf upstream. When pre-allocating skbs for received packets, we set ip_summed = CHECKSUM_UNNCESSARY. We used to change it back to CHECKSUM_NONE when the received packet had an incorrect checksum or unhandled protocol. Commit bc8acf2c8c3e43fcc192762a9f964b3e9a17748b ('drivers/net: avoid some skb->ip_summed initializations') mistakenly replaced the latter assignment with a DEBUG-only assertion that ip_summed == CHECKSUM_NONE. This assertion is always false, but it seems no-one has exercised this code path in a DEBUG build. Fix this by moving our assignment of CHECKSUM_UNNECESSARY into efx_rx_packet_gro(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* block, sx8: fix pointer math issue getting fw versionDan Carpenter2012-03-26
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit ea5f4db8ece896c2ab9eafa0924148a2596c52e4 upstream. "mem" is type u8. We need parenthesis here or it screws up the pointer math probably leading to an oops. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* regulator: Fix setting selector in tps6524x set_voltage functionAxel Lin2012-03-26
| | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit f03570cf1709397ebe656608266b44ec772960c2 upstream. Don't assign the voltage to selector. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* usb: asix: Patch for Sitecom LN-031Joerg Neikes2012-03-26
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit 4e50391968849860dff1aacde358b4eb14aa5127 upstream. This patch adds support for the Sitecom LN-031 USB adapter with a AX88178 chip. Added USB id to find correct driver for AX88178 1000 Ethernet adapter. Signed-off-by: Joerg Neikes <j.neikes@midlandgate.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* atl1c: dont use highprio tx queueEric Dumazet2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 [ Upstream commit 11aad99af6ef629ff3b05d1c9f0936589b204316 ] This driver attempts to use two TX rings but lacks proper support : 1) IRQ handler only takes care of TX completion on first TX ring 2) the stop/start logic uses the legacy functions (for non multiqueue drivers) This means all packets witk skb mark set to 1 are sent through high queue but are never cleaned and queue eventualy fills and block the device, triggering the infamous "NETDEV WATCHDOG" message. Lets use a single TX ring to fix the problem, this driver is not a real multiqueue one yet. Minimal fix for stable kernels. Reported-by: Thomas Meyer <thomas@m3y3r.de> Tested-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* vmxnet3: Fix transport header sizeShreyas Bhatewara2012-03-26
| | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 [ Upstream commit efead8710aad9e384730ecf25eae0287878840d7 ] Fix transport header size Fix the transpoert header size for UDP packets. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* ppp: fix 'ppp_mp_reconstruct bad seq' errorsBen McKeegan2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 [ Upstream commit 8a49ad6e89feb5015e77ce6efeb2678947117e20 ] This patch fixes a (mostly cosmetic) bug introduced by the patch 'ppp: Use SKB queue abstraction interfaces in fragment processing' found here: http://www.spinics.net/lists/netdev/msg153312.html The above patch rewrote and moved the code responsible for cleaning up discarded fragments but the new code does not catch every case where this is necessary. This results in some discarded fragments remaining in the queue, and triggering a 'bad seq' error on the subsequent call to ppp_mp_reconstruct. Fragments are discarded whenever other fragments of the same frame have been lost. This can generate a lot of unwanted and misleading log messages. This patch also adds additional detail to the debug logging to make it clearer which fragments were lost and which other fragments were discarded as a result of losses. (Run pppd with 'kdebug 1' option to enable debug logging.) Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
* acer-wmi: No wifi rfkill on Lenovo machinesIke Panhc2012-03-26
| | | | | | | | | | | | | | | | | | | | | | | BugLink: http://bugs.launchpad.net/bugs/959470 commit 461e74377cfcfc2c0d6bbdfa8fc5fbc21b052c2a upstream. We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-10 19:18:23 -0400