9 files changed, 31 insertions, 18 deletions

diff --git a/drivers/usb/gadget/fsl_mx3_udc.c b/drivers/usb/gadget/fsl_mx3_udc.c
index 4bc2bf3d602..20a802ecaa1 100644
--- a/drivers/usb/gadget/fsl_mx3_udc.c
+++ b/drivers/usb/gadget/fsl_mx3_udc.c
@@ -17,6 +17,8 @@
 #include <linux/fsl_devices.h>
 #include <linux/platform_device.h>
 
+#include <mach/hardware.h>
+
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_usb_clk;
 
@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 
         pdata = pdev->dev.platform_data;
 
-        mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
-        if (IS_ERR(mxc_ahb_clk))
-                return PTR_ERR(mxc_ahb_clk);
+        if (!cpu_is_mx35()) {
+                mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
+                if (IS_ERR(mxc_ahb_clk))
+                        return PTR_ERR(mxc_ahb_clk);
 
-        ret = clk_enable(mxc_ahb_clk);
-        if (ret < 0) {
-                dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
-                goto eenahb;
+                ret = clk_enable(mxc_ahb_clk);
+                if (ret < 0) {
+                        dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
+                        goto eenahb;
+                }
         }
 
         /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
         if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
             (freq < 59999000 || freq > 60001000)) {
                 dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
+                ret = -EINVAL;
                 goto eclkrate;
         }
 
@@ -66,9 +71,11 @@ eclkrate:
         clk_put(mxc_usb_clk);
         mxc_usb_clk = NULL;
 egusb:
-        clk_disable(mxc_ahb_clk);
+        if (!cpu_is_mx35())
+                clk_disable(mxc_ahb_clk);
 eenahb:
-        clk_put(mxc_ahb_clk);
+        if (!cpu_is_mx35())
+                clk_put(mxc_ahb_clk);
         return ret;
 }
 
@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
                 clk_disable(mxc_usb_clk);
                 clk_put(mxc_usb_clk);
         }
-        clk_disable(mxc_ahb_clk);
-        clk_put(mxc_ahb_clk);
+        if (!cpu_is_mx35()) {
+                clk_disable(mxc_ahb_clk);
+                clk_put(mxc_ahb_clk);
+        }
 }
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index e6fedbd5a65..be5fb34d960 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -65,6 +65,10 @@
 #include <mach/pxa25x-udc.h>
 #endif
 
+#ifdef CONFIG_ARCH_LUBBOCK
+#include <mach/lubbock.h>
+#endif
+
 #include <asm/mach/udc_pxa2xx.h>
 
 
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 7e5bf593d38..f742c8e7397 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,7 +30,7 @@
 
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/regs-usb-hsotg.h>
-#include <plat/regs-sys.h>
+#include <mach/regs-sys.h>
 #include <plat/udc-hs.h>
 
 #define DMA_ADDR_INVALID (~((dma_addr_t)0))
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 66913811af5..a883f9dd3f8 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -274,7 +274,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
         /* NOTE: DaVinci shadows the Mentor IRQs.  Don't manage them through
          * the Mentor registers (except for setup), use the TI ones and EOI.
          *
-         * Docs describe irq "vector" registers asociated with the CPPI and
+         * Docs describe irq "vector" registers associated with the CPPI and
          * USB EOI registers.  These hold a bitmask corresponding to the
          * current IRQ, not an irq handler address.  Would using those bits
          * resolve some of the races observed in this dispatch code??
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 292894a2c24..8d8062b10e2 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -491,7 +491,7 @@ static inline u8  musb_read_txhubport(void __iomem *mbase, u8 epnum)
 #define MUSB_FLAT_OFFSET(_epnum, _offset)       \
         (USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
 
-/* Not implemented - HW has seperate Tx/Rx FIFO */
+/* Not implemented - HW has separate Tx/Rx FIFO */
 #define MUSB_TXCSR_MODE                 0x0000
 
 static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index baf74b44e6e..e23c77925e7 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -152,7 +152,7 @@ struct cypress_private {
         int isthrottled;                   /* if throttled, discard reads */
         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
         char prev_status, diff_status;     /* used for TIOCMIWAIT */
-        /* we pass a pointer to this as the arguement sent to
+        /* we pass a pointer to this as the argument sent to
            cypress_set_termios old_termios */
         struct ktermios tmp_termios;       /* stores the old termios settings */
 };
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index f37476e2268..701452ae919 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -115,7 +115,7 @@ static void opticon_bulk_callback(struct urb *urb)
                 }
         } else {
                 dev_dbg(&priv->udev->dev,
-                        "Improper ammount of data received from the device, "
+                        "Improper amount of data received from the device, "
                         "%d bytes", urb->actual_length);
         }
 
diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c
index 72398888858..ee190cc1757 100644
--- a/drivers/usb/serial/symbolserial.c
+++ b/drivers/usb/serial/symbolserial.c
@@ -94,7 +94,7 @@ static void symbol_int_callback(struct urb *urb)
                 }
         } else {
                 dev_dbg(&priv->udev->dev,
-                        "Improper ammount of data received from the device, "
+                        "Improper amount of data received from the device, "
                         "%d bytes", urb->actual_length);
         }
 
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index fd2fd4e277e..759cda55f7c 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -198,7 +198,7 @@ struct wusb_port {
  *                 ports) this HC will take. Read-only.
  *
  * @port           Array of port status for each fake root port. Guaranteed to
- *                 always be the same lenght during device existence
+ *                 always be the same length during device existence
  *                 [this allows for some unlocked but referenced reading].
  *
  * @mmcies_max     Max number of Information Elements this HC can send