1 files changed, 303 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
new file mode 100644
index 00000000000..3d00b935723
--- /dev/null
+++ b/drivers/acpi/acpica/exsystem.c
@@ -0,0 +1,303 @@
+
+/******************************************************************************
+ *
+ * Module Name: exsystem - Interface to OS services
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acinterp.h"
+
+#define _COMPONENT          ACPI_EXECUTER
+ACPI_MODULE_NAME("exsystem")
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_wait_semaphore
+ *
+ * PARAMETERS:  Semaphore       - Semaphore to wait on
+ *              Timeout         - Max time to wait
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Implements a semaphore wait with a check to see if the
+ *              semaphore is available immediately.  If it is not, the
+ *              interpreter is released before waiting.
+ *
+ ******************************************************************************/
+acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
+{
+        acpi_status status;
+
+        ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
+
+        status = acpi_os_wait_semaphore(semaphore, 1, ACPI_DO_NOT_WAIT);
+        if (ACPI_SUCCESS(status)) {
+                return_ACPI_STATUS(status);
+        }
+
+        if (status == AE_TIME) {
+
+                /* We must wait, so unlock the interpreter */
+
+                acpi_ex_relinquish_interpreter();
+
+                status = acpi_os_wait_semaphore(semaphore, 1, timeout);
+
+                ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+                                  "*** Thread awake after blocking, %s\n",
+                                  acpi_format_exception(status)));
+
+                /* Reacquire the interpreter */
+
+                acpi_ex_reacquire_interpreter();
+        }
+
+        return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_wait_mutex
+ *
+ * PARAMETERS:  Mutex           - Mutex to wait on
+ *              Timeout         - Max time to wait
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Implements a mutex wait with a check to see if the
+ *              mutex is available immediately.  If it is not, the
+ *              interpreter is released before waiting.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
+{
+        acpi_status status;
+
+        ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
+
+        status = acpi_os_acquire_mutex(mutex, ACPI_DO_NOT_WAIT);
+        if (ACPI_SUCCESS(status)) {
+                return_ACPI_STATUS(status);
+        }
+
+        if (status == AE_TIME) {
+
+                /* We must wait, so unlock the interpreter */
+
+                acpi_ex_relinquish_interpreter();
+
+                status = acpi_os_acquire_mutex(mutex, timeout);
+
+                ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+                                  "*** Thread awake after blocking, %s\n",
+                                  acpi_format_exception(status)));
+
+                /* Reacquire the interpreter */
+
+                acpi_ex_reacquire_interpreter();
+        }
+
+        return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_do_stall
+ *
+ * PARAMETERS:  how_long        - The amount of time to stall,
+ *                                in microseconds
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Suspend running thread for specified amount of time.
+ *              Note: ACPI specification requires that Stall() does not
+ *              relinquish the processor, and delays longer than 100 usec
+ *              should use Sleep() instead.  We allow stalls up to 255 usec
+ *              for compatibility with other interpreters and existing BIOSs.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_system_do_stall(u32 how_long)
+{
+        acpi_status status = AE_OK;
+
+        ACPI_FUNCTION_ENTRY();
+
+        if (how_long > 255) {   /* 255 microseconds */
+                /*
+                 * Longer than 255 usec, this is an error
+                 *
+                 * (ACPI specifies 100 usec as max, but this gives some slack in
+                 * order to support existing BIOSs)
+                 */
+                ACPI_ERROR((AE_INFO, "Time parameter is too large (%d)",
+                            how_long));
+                status = AE_AML_OPERAND_VALUE;
+        } else {
+                acpi_os_stall(how_long);
+        }
+
+        return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_do_suspend
+ *
+ * PARAMETERS:  how_long        - The amount of time to suspend,
+ *                                in milliseconds
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Suspend running thread for specified amount of time.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
+{
+        ACPI_FUNCTION_ENTRY();
+
+        /* Since this thread will sleep, we must release the interpreter */
+
+        acpi_ex_relinquish_interpreter();
+
+        acpi_os_sleep(how_long);
+
+        /* And now we must get the interpreter again */
+
+        acpi_ex_reacquire_interpreter();
+        return (AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_signal_event
+ *
+ * PARAMETERS:  obj_desc        - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_system_signal_event(union acpi_operand_object * obj_desc)
+{
+        acpi_status status = AE_OK;
+
+        ACPI_FUNCTION_TRACE(ex_system_signal_event);
+
+        if (obj_desc) {
+                status =
+                    acpi_os_signal_semaphore(obj_desc->event.os_semaphore, 1);
+        }
+
+        return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_wait_event
+ *
+ * PARAMETERS:  time_desc       - The 'time to delay' object descriptor
+ *              obj_desc        - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Provides an access point to perform synchronization operations
+ *              within the AML.  This operation is a request to wait for an
+ *              event.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ex_system_wait_event(union acpi_operand_object *time_desc,
+                          union acpi_operand_object *obj_desc)
+{
+        acpi_status status = AE_OK;
+
+        ACPI_FUNCTION_TRACE(ex_system_wait_event);
+
+        if (obj_desc) {
+                status =
+                    acpi_ex_system_wait_semaphore(obj_desc->event.os_semaphore,
+                                                  (u16) time_desc->integer.
+                                                  value);
+        }
+
+        return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ex_system_reset_event
+ *
+ * PARAMETERS:  obj_desc        - The object descriptor for this op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Reset an event to a known state.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ex_system_reset_event(union acpi_operand_object *obj_desc)
+{
+        acpi_status status = AE_OK;
+        acpi_semaphore temp_semaphore;
+
+        ACPI_FUNCTION_ENTRY();
+
+        /*
+         * We are going to simply delete the existing semaphore and
+         * create a new one!
+         */
+        status =
+            acpi_os_create_semaphore(ACPI_NO_UNIT_LIMIT, 0, &temp_semaphore);
+        if (ACPI_SUCCESS(status)) {
+                (void)acpi_os_delete_semaphore(obj_desc->event.os_semaphore);
+                obj_desc->event.os_semaphore = temp_semaphore;
+        }
+
+        return (status);
+}