1 files changed, 51 insertions, 27 deletions

diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 05aaac1c386..0bc97698af1 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -347,11 +347,20 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
         }
 }
 
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
 {
-        u8 pwr;
+        u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+        if (on)
+                pwr &= ~PHY_PWR_PHYPWD;
+        else
+                pwr |= PHY_PWR_PHYPWD;
 
-        pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+        WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
+static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
         if (on) {
                 regulator_enable(twl->usb3v1);
                 regulator_enable(twl->usb1v8);
@@ -365,15 +374,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
                 twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
                                                         VUSB_DEDICATED2);
                 regulator_enable(twl->usb1v5);
-                pwr &= ~PHY_PWR_PHYPWD;
-                WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+                __twl4030_phy_power(twl, 1);
                 twl4030_usb_write(twl, PHY_CLK_CTRL,
                                   twl4030_usb_read(twl, PHY_CLK_CTRL) |
                                         (PHY_CLK_CTRL_CLOCKGATING_EN |
                                                 PHY_CLK_CTRL_CLK32K_EN));
-        } else  {
-                pwr |= PHY_PWR_PHYPWD;
-                WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+        } else {
+                __twl4030_phy_power(twl, 0);
                 regulator_disable(twl->usb1v5);
                 regulator_disable(twl->usb1v8);
                 regulator_disable(twl->usb3v1);
@@ -387,19 +394,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
 
         twl4030_phy_power(twl, 0);
         twl->asleep = 1;
+        dev_dbg(twl->dev, "%s\n", __func__);
 }
 
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
 {
-        if (!twl->asleep)
-                return;
-
         twl4030_phy_power(twl, 1);
         twl4030_i2c_access(twl, 1);
         twl4030_usb_set_mode(twl, twl->usb_mode);
         if (twl->usb_mode == T2_USB_MODE_ULPI)
                 twl4030_i2c_access(twl, 0);
+}
+
+static void twl4030_phy_resume(struct twl4030_usb *twl)
+{
+        if (!twl->asleep)
+                return;
+        __twl4030_phy_resume(twl);
         twl->asleep = 0;
+        dev_dbg(twl->dev, "%s\n", __func__);
 }
 
 static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -408,8 +421,8 @@ static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
         twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
         twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
 
-        /* put VUSB3V1 LDO in active state */
-        twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+        /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+        /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
 
         /* input to VUSB3V1 LDO is from VBAT, not VBUS */
         twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
@@ -502,6 +515,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
         return IRQ_HANDLED;
 }
 
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+        int status;
+
+        status = twl4030_usb_linkstat(twl);
+        if (status >= 0) {
+                if (status == USB_EVENT_NONE) {
+                        __twl4030_phy_power(twl, 0);
+                        twl->asleep = 1;
+                } else {
+                        __twl4030_phy_resume(twl);
+                        twl->asleep = 0;
+                }
+
+                blocking_notifier_call_chain(&twl->otg.notifier, status,
+                                twl->otg.gadget);
+        }
+        sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
 static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
 {
         struct twl4030_usb *twl = xceiv_to_twl(x);
@@ -550,7 +583,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         struct twl4030_usb_data *pdata = pdev->dev.platform_data;
         struct twl4030_usb      *twl;
         int                     status, err;
-        u8                      pwr;
 
         if (!pdata) {
                 dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -569,10 +601,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
         twl->otg.set_peripheral = twl4030_set_peripheral;
         twl->otg.set_suspend    = twl4030_set_suspend;
         twl->usb_mode           = pdata->usb_mode;
-
-        pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
-        twl->asleep             = (pwr & PHY_PWR_PHYPWD);
+        twl->asleep = 1;
 
         /* init spinlock for workqueue */
         spin_lock_init(&twl->lock);
@@ -610,15 +639,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
                 return status;
         }
 
-        /* The IRQ handler just handles changes from the previous states
-         * of the ID and VBUS pins ... in probe() we must initialize that
-         * previous state.  The easy way:  fake an IRQ.
-         *
-         * REVISIT:  a real IRQ might have happened already, if PREEMPT is
-         * enabled.  Else the IRQ may not yet be configured or enabled,
-         * because of scheduling delays.
+        /* Power down phy or make it work according to
+         * current link state.
          */
-        twl4030_usb_irq(twl->irq, twl);
+        twl4030_usb_phy_init(twl);
 
         dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
         return 0;