From 40cbbb781d3eba5d6ac0860db078af490e5c7c6b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:19 +0900 Subject: block: implement and use [__]blk_end_request_all() There are many [__]blk_end_request() call sites which call it with full request length and expect full completion. Many of them ensure that the request actually completes by doing BUG_ON() the return value, which is awkward and error-prone. This patch adds [__]blk_end_request_all() which takes @rq and @error and fully completes the request. BUG_ON() is added to to ensure that this actually happens. Most conversions are simple but there are a few noteworthy ones. * cdrom/viocd: viocd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/block/dasd: dasd_end_request() replaced with direct calls to __blk_end_request_all(). * s390/char/tape_block: tapeblock_end_request() replaced with direct calls to blk_end_request_all(). [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Russell King Cc: Stephen Rothwell Cc: Mike Miller Cc: Martin Schwidefsky Cc: Jeff Garzik Cc: Rusty Russell Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index d1cb64ad1a3..756ac7c93de 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -922,7 +922,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (driver_byte(result) & DRIVER_SENSE) scsi_print_sense("", cmd); } - blk_end_request(req, -EIO, blk_rq_bytes(req)); + blk_end_request_all(req, -EIO); scsi_next_command(cmd); break; case ACTION_REPREP: -- cgit v1.2.2 From 731ec497e5888c6792ad62613ae9be97eebcd7ca Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 23 Apr 2009 11:05:20 +0900 Subject: block: kill rq->data Now that all block request data transfer is done via bio, rq->data isn't used. Kill it. While at it, make the roles of rq->special and buffer clear. [ Impact: drop now unncessary field from struct request ] Signed-off-by: Tejun Heo Cc: Boaz Harrosh --- drivers/scsi/scsi_lib.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 756ac7c93de..aa9fc572e45 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1088,7 +1088,6 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) return ret; } else { BUG_ON(req->data_len); - BUG_ON(req->data); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); req->buffer = NULL; -- cgit v1.2.2 From c3a4d78c580de4edc9ef0f7c59812fb02ceb037f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:37 +0900 Subject: block: add rq->resid_len rq->data_len served two purposes - the length of data buffer on issue and the residual count on completion. This duality creates some headaches. First of all, block layer and low level drivers can't really determine what rq->data_len contains while a request is executing. It could be the total request length or it coulde be anything else one of the lower layers is using to keep track of residual count. This complicates things because blk_rq_bytes() and thus [__]blk_end_request_all() relies on rq->data_len for PC commands. Drivers which want to report residual count should first cache the total request length, update rq->data_len and then complete the request with the cached data length. Secondly, it makes requests default to reporting full residual count, ie. reporting that no data transfer occurred. The residual count is an exception not the norm; however, the driver should clear rq->data_len to zero to signify the normal cases while leaving it alone means no data transfer occurred at all. This reverse default behavior complicates code unnecessarily and renders block PC on some drivers (ide-tape/floppy) unuseable. This patch adds rq->resid_len which is used only for residual count. While at it, remove now unnecessasry blk_rq_bytes() caching in ide_pc_intr() as rq->data_len is not changed anymore. Boaz : spotted missing conversion in osd Sergei : spotted too early conversion to blk_rq_bytes() in ide-tape [ Impact: cleanup residual count handling, report 0 resid by default ] Signed-off-by: Tejun Heo Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Mike Miller Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Doug Gilbert Cc: Mike Miller Cc: Eric Moore Cc: Darrick J. Wong Cc: Pete Zaitcev Cc: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/scsi/libsas/sas_expander.c | 6 +---- drivers/scsi/libsas/sas_host_smp.c | 38 +++++++++++++++++--------------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 +--- drivers/scsi/scsi_lib.c | 24 ++++++++++---------- drivers/scsi/sg.c | 2 +- drivers/scsi/st.c | 2 +- 6 files changed, 36 insertions(+), 40 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 3da02e43678..6605ec905cc 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1936,12 +1936,8 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, bio_data(rsp->bio), rsp->data_len); if (ret > 0) { /* positive number is the untransferred residual */ - rsp->data_len = ret; - req->data_len = 0; + rsp->resid_len = ret; ret = 0; - } else if (ret == 0) { - rsp->data_len = 0; - req->data_len = 0; } return ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index d110a366c48..89952edd0be 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -134,7 +134,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, { u8 *req_data = NULL, *resp_data = NULL, *buf; struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); - int error = -EINVAL, resp_data_len = rsp->data_len; + int error = -EINVAL; /* eight is the minimum size for request and response frames */ if (req->data_len < 8 || rsp->data_len < 8) @@ -176,17 +176,20 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; + req->resid_len = req->data_len; + rsp->resid_len = rsp->data_len; + switch (req_data[1]) { case SMP_REPORT_GENERAL: - req->data_len -= 8; - resp_data_len -= 32; + req->resid_len -= 8; + rsp->resid_len -= 32; resp_data[2] = SMP_RESP_FUNC_ACC; resp_data[9] = sas_ha->num_phys; break; case SMP_REPORT_MANUF_INFO: - req->data_len -= 8; - resp_data_len -= 64; + req->resid_len -= 8; + rsp->resid_len -= 64; resp_data[2] = SMP_RESP_FUNC_ACC; memcpy(resp_data + 12, shost->hostt->name, SAS_EXPANDER_VENDOR_ID_LEN); @@ -199,13 +202,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_DISCOVER: - req->data_len -= 16; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 16; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 56; + rsp->resid_len -= 56; sas_host_smp_discover(sas_ha, resp_data, req_data[9]); break; @@ -215,13 +218,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_REPORT_PHY_SATA: - req->data_len -= 16; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 16; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 60; + rsp->resid_len -= 60; sas_report_phy_sata(sas_ha, resp_data, req_data[9]); break; @@ -238,13 +241,13 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, break; case SMP_PHY_CONTROL: - req->data_len -= 44; - if ((int)req->data_len < 0) { - req->data_len = 0; + req->resid_len -= 44; + if ((int)req->resid_len < 0) { + req->resid_len = 0; error = -EINVAL; goto out; } - resp_data_len -= 8; + rsp->resid_len -= 8; sas_phy_control(sas_ha, req_data[9], req_data[10], req_data[32] >> 4, req_data[33] >> 4, resp_data); @@ -265,7 +268,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, flush_kernel_dcache_page(bio_page(rsp->bio)); kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); local_irq_enable(); - rsp->data_len = resp_data_len; out: kfree(req_data); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index e03dc0b1e1a..53759c566bf 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1170,9 +1170,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - req->data_len = 0; - rsp->data_len -= mpi_reply->ResponseDataLength; - + rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index aa9fc572e45..7d49ef589f3 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -240,11 +240,11 @@ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, * is invalid. Prevent the garbage from being misinterpreted * and prevent security leaks by zeroing out the excess data. */ - if (unlikely(req->data_len > 0 && req->data_len <= bufflen)) - memset(buffer + (bufflen - req->data_len), 0, req->data_len); + if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen)) + memset(buffer + (bufflen - req->resid_len), 0, req->resid_len); if (resid) - *resid = req->data_len; + *resid = req->resid_len; ret = req->errors; out: blk_put_request(req); @@ -549,7 +549,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, int leftover = (req->hard_nr_sectors << 9); if (blk_pc_request(req)) - leftover = req->data_len; + leftover = req->resid_len; /* kill remainder if no retrys */ if (error && scsi_noretry_cmd(cmd)) @@ -673,11 +673,11 @@ void scsi_release_buffers(struct scsi_cmnd *cmd) EXPORT_SYMBOL(scsi_release_buffers); /* - * Bidi commands Must be complete as a whole, both sides at once. - * If part of the bytes were written and lld returned - * scsi_in()->resid and/or scsi_out()->resid this information will be left - * in req->data_len and req->next_rq->data_len. The upper-layer driver can - * decide what to do with this information. + * Bidi commands Must be complete as a whole, both sides at once. If + * part of the bytes were written and lld returned scsi_in()->resid + * and/or scsi_out()->resid this information will be left in + * req->resid_len and req->next_rq->resid_len. The upper-layer driver + * can decide what to do with this information. */ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) { @@ -685,8 +685,8 @@ static void scsi_end_bidi_request(struct scsi_cmnd *cmd) unsigned int dlen = req->data_len; unsigned int next_dlen = req->next_rq->data_len; - req->data_len = scsi_out(cmd)->resid; - req->next_rq->data_len = scsi_in(cmd)->resid; + req->resid_len = scsi_out(cmd)->resid; + req->next_rq->resid_len = scsi_in(cmd)->resid; /* The req and req->next_rq have not been completed */ BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen)); @@ -778,7 +778,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) scsi_end_bidi_request(cmd); return; } - req->data_len = scsi_get_resid(cmd); + req->resid_len = scsi_get_resid(cmd); } BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */ diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 82312df9b0b..dec4c70677d 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -1260,7 +1260,7 @@ static void sg_rq_end_io(struct request *rq, int uptodate) sense = rq->sense; result = rq->errors; - resid = rq->data_len; + resid = rq->resid_len; SCSI_LOG_TIMEOUT(4, printk("sg_cmd_done: %s, pack_id=%d, res=0x%x\n", sdp->disk->disk_name, srp->header.pack_id, result)); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index eb24efea8f1..8681b708344 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -463,7 +463,7 @@ static void st_scsi_execute_end(struct request *req, int uptodate) struct scsi_tape *STp = SRpnt->stp; STp->buffer->cmdstat.midlevel_result = SRpnt->result = req->errors; - STp->buffer->cmdstat.residual = req->data_len; + STp->buffer->cmdstat.residual = req->resid_len; if (SRpnt->waiting) complete(SRpnt->waiting); -- cgit v1.2.2 From 5b93629b4509c03ffa87a9316412fedf6f58cb37 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:38 +0900 Subject: block: implement blk_rq_pos/[cur_]sectors() and convert obvious ones Implement accessors - blk_rq_pos(), blk_rq_sectors() and blk_rq_cur_sectors() which return rq->hard_sector, rq->hard_nr_sectors and rq->hard_cur_sectors respectively and convert direct references of the said fields to the accessors. This is in preparation of request data length handling cleanup. Geert : suggested adding const to struct request * parameter to accessors Sergei : spotted error in patch description [ Impact: cleanup ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Acked-by: Stephen Rothwell Tested-by: Grant Likely Acked-by: Grant Likely Ackec-by: Sergei Shtylyov Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: James Bottomley Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 7d49ef589f3..9ff0ca9988a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = (req->hard_nr_sectors << 9); + int leftover = blk_rq_sectors(req) << 9; if (blk_pc_request(req)) leftover = req->resid_len; -- cgit v1.2.2 From 83096ebf1263b2c1ee5e653ba37d993d02e3eb7b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:39 +0900 Subject: block: convert to pos and nr_sectors accessors With recent cleanups, there is no place where low level driver directly manipulates request fields. This means that the 'hard' request fields always equal the !hard fields. Convert all rq->sectors, nr_sectors and current_nr_sectors references to accessors. While at it, drop superflous blk_rq_pos() < 0 test in swim.c. [ Impact: use pos and nr_sectors accessors ] Signed-off-by: Tejun Heo Acked-by: Geert Uytterhoeven Tested-by: Grant Likely Acked-by: Grant Likely Tested-by: Adrian McMenamin Acked-by: Adrian McMenamin Acked-by: Mike Miller Cc: James Bottomley Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Eric Moore Cc: Alan Stern Cc: FUJITA Tomonori Cc: Pete Zaitcev Cc: Stephen Rothwell Cc: Paul Clements Cc: Tim Waugh Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Alex Dubov Cc: David Woodhouse Cc: Martin Schwidefsky Cc: Dario Ballabio Cc: David S. Miller Cc: Rusty Russell Cc: unsik Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/scsi/eata.c | 24 ++++++++++++------------ drivers/scsi/lpfc/lpfc_scsi.c | 22 +++++++++++----------- drivers/scsi/scsi_lib.c | 6 +++--- drivers/scsi/sd.c | 24 ++++++++++++------------ drivers/scsi/sd_dif.c | 2 +- drivers/scsi/sr.c | 15 ++++++++------- drivers/scsi/u14-34f.c | 22 ++++++++++++---------- 7 files changed, 59 insertions(+), 56 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c index be5099dd94b..c7076ce25e2 100644 --- a/drivers/scsi/eata.c +++ b/drivers/scsi/eata.c @@ -1825,7 +1825,7 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt, if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) { ha->cp_stat[i] = READY; - flush_dev(SCpnt->device, SCpnt->request->sector, ha, 0); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0); return 0; } @@ -2144,13 +2144,13 @@ static int reorder(struct hostdata *ha, unsigned long cursec, if (!cpp->din) input_only = 0; - if (SCpnt->request->sector < minsec) - minsec = SCpnt->request->sector; - if (SCpnt->request->sector > maxsec) - maxsec = SCpnt->request->sector; + if (blk_rq_pos(SCpnt->request) < minsec) + minsec = blk_rq_pos(SCpnt->request); + if (blk_rq_pos(SCpnt->request) > maxsec) + maxsec = blk_rq_pos(SCpnt->request); - sl[n] = SCpnt->request->sector; - ioseek += SCpnt->request->nr_sectors; + sl[n] = blk_rq_pos(SCpnt->request); + ioseek += blk_rq_sectors(SCpnt->request); if (!n) continue; @@ -2190,7 +2190,7 @@ static int reorder(struct hostdata *ha, unsigned long cursec, k = il[n]; cpp = &ha->cp[k]; SCpnt = cpp->SCpnt; - ll[n] = SCpnt->request->nr_sectors; + ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number; if (!n) @@ -2236,12 +2236,12 @@ static int reorder(struct hostdata *ha, unsigned long cursec, cpp = &ha->cp[k]; SCpnt = cpp->SCpnt; scmd_printk(KERN_INFO, SCpnt, - "%s pid %ld mb %d fc %d nr %d sec %ld ns %ld" + "%s pid %ld mb %d fc %d nr %d sec %ld ns %u" " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n", (ihdlr ? "ihdlr" : "qcomm"), SCpnt->serial_number, k, flushcount, - n_ready, SCpnt->request->sector, - SCpnt->request->nr_sectors, cursec, YESNO(s), + n_ready, blk_rq_pos(SCpnt->request), + blk_rq_sectors(SCpnt->request), cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), YESNO(overlap), cpp->din); } @@ -2408,7 +2408,7 @@ static irqreturn_t ihdlr(struct Scsi_Host *shost) if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) - flush_dev(SCpnt->device, SCpnt->request->sector, ha, 1); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1); tstatus = status_byte(spp->target_status); diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 36fd2e75da1..a8fab397711 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -1313,10 +1313,10 @@ lpfc_parse_bg_err(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd, uint32_t bgstat = bgf->bgstat; uint64_t failing_sector = 0; - printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%lx " + printk(KERN_ERR "BG ERROR in cmd 0x%x lba 0x%llx blk cnt 0x%x " "bgstat=0x%x bghm=0x%x\n", cmd->cmnd[0], (unsigned long long)scsi_get_lba(cmd), - cmd->request->nr_sectors, bgstat, bghm); + blk_rq_sectors(cmd->request), bgstat, bghm); spin_lock(&_dump_buf_lock); if (!_dump_buf_done) { @@ -2375,15 +2375,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9035 BLKGRD: READ @ sector %llu, " - "count %lu\n", - (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors); + "count %u\n", + (unsigned long long)scsi_get_lba(cmnd), + blk_rq_sectors(cmnd->request)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9036 BLKGRD: WRITE @ sector %llu, " - "count %lu cmd=%p\n", + "count %u cmd=%p\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors, + blk_rq_sectors(cmnd->request), cmnd); err = lpfc_bg_scsi_prep_dma_buf(phba, lpfc_cmd); @@ -2403,15 +2403,15 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *)) if (cmnd->cmnd[0] == READ_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9040 dbg: READ @ sector %llu, " - "count %lu\n", + "count %u\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors); + blk_rq_sectors(cmnd->request)); else if (cmnd->cmnd[0] == WRITE_10) lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9041 dbg: WRITE @ sector %llu, " - "count %lu cmd=%p\n", + "count %u cmd=%p\n", (unsigned long long)scsi_get_lba(cmnd), - cmnd->request->nr_sectors, cmnd); + blk_rq_sectors(cmnd->request), cmnd); else lpfc_printf_vlog(vport, KERN_WARNING, LOG_BG, "9042 dbg: parser not implemented\n"); diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 9ff0ca9988a..39b3acfc0dd 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -787,9 +787,9 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) * Next deal with any sectors which we were able to correctly * handle. */ - SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, " + SCSI_LOG_HLCOMPLETE(1, printk("%u sectors total, " "%d bytes done.\n", - req->nr_sectors, good_bytes)); + blk_rq_sectors(req), good_bytes)); /* * Recovered errors need reporting, but they're always treated @@ -968,7 +968,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, if (blk_pc_request(req)) sdb->length = req->data_len; else - sdb->length = req->nr_sectors << 9; + sdb->length = blk_rq_sectors(req) << 9; return BLKPREP_OK; } diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 3fcb64b91c4..70c4dd99bbf 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -383,9 +383,9 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) struct scsi_device *sdp = q->queuedata; struct gendisk *disk = rq->rq_disk; struct scsi_disk *sdkp; - sector_t block = rq->sector; + sector_t block = blk_rq_pos(rq); sector_t threshold; - unsigned int this_count = rq->nr_sectors; + unsigned int this_count = blk_rq_sectors(rq); int ret, host_dif; if (rq->cmd_type == REQ_TYPE_BLOCK_PC) { @@ -412,10 +412,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) this_count)); if (!sdp || !scsi_device_online(sdp) || - block + rq->nr_sectors > get_capacity(disk)) { + block + blk_rq_sectors(rq) > get_capacity(disk)) { SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, - "Finishing %ld sectors\n", - rq->nr_sectors)); + "Finishing %u sectors\n", + blk_rq_sectors(rq))); SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "Retry with 0x%p\n", SCpnt)); goto out; @@ -462,7 +462,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) * for this. */ if (sdp->sector_size == 1024) { - if ((block & 1) || (rq->nr_sectors & 1)) { + if ((block & 1) || (blk_rq_sectors(rq) & 1)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -472,7 +472,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } } if (sdp->sector_size == 2048) { - if ((block & 3) || (rq->nr_sectors & 3)) { + if ((block & 3) || (blk_rq_sectors(rq) & 3)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -482,7 +482,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } } if (sdp->sector_size == 4096) { - if ((block & 7) || (rq->nr_sectors & 7)) { + if ((block & 7) || (blk_rq_sectors(rq) & 7)) { scmd_printk(KERN_ERR, SCpnt, "Bad block number requested\n"); goto out; @@ -511,10 +511,10 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq) } SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, - "%s %d/%ld 512 byte blocks.\n", + "%s %d/%u 512 byte blocks.\n", (rq_data_dir(rq) == WRITE) ? "writing" : "reading", this_count, - rq->nr_sectors)); + blk_rq_sectors(rq))); /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */ host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type); @@ -970,8 +970,8 @@ static struct block_device_operations sd_fops = { static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd) { - u64 start_lba = scmd->request->sector; - u64 end_lba = scmd->request->sector + (scsi_bufflen(scmd) / 512); + u64 start_lba = blk_rq_pos(scmd->request); + u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512); u64 bad_lba; int info_valid; diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 184dff49279..82f14a9482d 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -507,7 +507,7 @@ void sd_dif_complete(struct scsi_cmnd *scmd, unsigned int good_bytes) sector_sz = scmd->device->sector_size; sectors = good_bytes / sector_sz; - phys = scmd->request->sector & 0xffffffff; + phys = blk_rq_pos(scmd->request) & 0xffffffff; if (sector_sz == 4096) phys >>= 3; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 0e1a0f2d2ad..fddba53c7fe 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -292,7 +292,8 @@ static int sr_done(struct scsi_cmnd *SCpnt) if (cd->device->sector_size == 2048) error_sector <<= 2; error_sector &= ~(block_sectors - 1); - good_bytes = (error_sector - SCpnt->request->sector) << 9; + good_bytes = (error_sector - + blk_rq_pos(SCpnt->request)) << 9; if (good_bytes < 0 || good_bytes >= this_count) good_bytes = 0; /* @@ -349,8 +350,8 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) cd->disk->disk_name, block)); if (!cd->device || !scsi_device_online(cd->device)) { - SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n", - rq->nr_sectors)); + SCSI_LOG_HLQUEUE(2, printk("Finishing %u sectors\n", + blk_rq_sectors(rq))); SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt)); goto out; } @@ -413,7 +414,7 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) /* * request doesn't start on hw block boundary, add scatter pads */ - if (((unsigned int)rq->sector % (s_size >> 9)) || + if (((unsigned int)blk_rq_pos(rq) % (s_size >> 9)) || (scsi_bufflen(SCpnt) % s_size)) { scmd_printk(KERN_NOTICE, SCpnt, "unaligned transfer\n"); goto out; @@ -422,14 +423,14 @@ static int sr_prep_fn(struct request_queue *q, struct request *rq) this_count = (scsi_bufflen(SCpnt) >> 9) / (s_size >> 9); - SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n", + SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%u 512 byte blocks.\n", cd->cdi.name, (rq_data_dir(rq) == WRITE) ? "writing" : "reading", - this_count, rq->nr_sectors)); + this_count, blk_rq_sectors(rq))); SCpnt->cmnd[1] = 0; - block = (unsigned int)rq->sector / (s_size >> 9); + block = (unsigned int)blk_rq_pos(rq) / (s_size >> 9); if (this_count > 0xffff) { this_count = 0xffff; diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c index 601e95141cb..54023d41fd1 100644 --- a/drivers/scsi/u14-34f.c +++ b/drivers/scsi/u14-34f.c @@ -1306,7 +1306,7 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) { HD(j)->cp_stat[i] = READY; - flush_dev(SCpnt->device, SCpnt->request->sector, j, FALSE); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, FALSE); return 0; } @@ -1610,11 +1610,13 @@ static int reorder(unsigned int j, unsigned long cursec, if (!(cpp->xdir == DTD_IN)) input_only = FALSE; - if (SCpnt->request->sector < minsec) minsec = SCpnt->request->sector; - if (SCpnt->request->sector > maxsec) maxsec = SCpnt->request->sector; + if (blk_rq_pos(SCpnt->request) < minsec) + minsec = blk_rq_pos(SCpnt->request); + if (blk_rq_pos(SCpnt->request) > maxsec) + maxsec = blk_rq_pos(SCpnt->request); - sl[n] = SCpnt->request->sector; - ioseek += SCpnt->request->nr_sectors; + sl[n] = blk_rq_pos(SCpnt->request); + ioseek += blk_rq_sectors(SCpnt->request); if (!n) continue; @@ -1642,7 +1644,7 @@ static int reorder(unsigned int j, unsigned long cursec, if (!input_only) for (n = 0; n < n_ready; n++) { k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt; - ll[n] = SCpnt->request->nr_sectors; pl[n] = SCpnt->serial_number; + ll[n] = blk_rq_sectors(SCpnt->request); pl[n] = SCpnt->serial_number; if (!n) continue; @@ -1666,12 +1668,12 @@ static int reorder(unsigned int j, unsigned long cursec, if (link_statistics && (overlap || !(flushcount % link_statistics))) for (n = 0; n < n_ready; n++) { k = il[n]; cpp = &HD(j)->cp[k]; SCpnt = cpp->SCpnt; - printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %ld"\ + printk("%s %d.%d:%d pid %ld mb %d fc %d nr %d sec %ld ns %u"\ " cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n", (ihdlr ? "ihdlr" : "qcomm"), SCpnt->channel, SCpnt->target, SCpnt->lun, SCpnt->serial_number, k, flushcount, n_ready, - SCpnt->request->sector, SCpnt->request->nr_sectors, cursec, - YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), + blk_rq_pos(SCpnt->request), blk_rq_sectors(SCpnt->request), + cursec, YESNO(s), YESNO(r), YESNO(rev), YESNO(input_only), YESNO(overlap), cpp->xdir); } #endif @@ -1799,7 +1801,7 @@ static irqreturn_t ihdlr(unsigned int j) if (linked_comm && SCpnt->device->queue_depth > 2 && TLDEV(SCpnt->device->type)) - flush_dev(SCpnt->device, SCpnt->request->sector, j, TRUE); + flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), j, TRUE); tstatus = status_byte(spp->target_status); -- cgit v1.2.2 From b0790410300abaaf4f25f702803beff701baebf1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:42 +0900 Subject: block: cleanup rq->data_len usages With recent unification of fields, it's now guaranteed that rq->data_len always equals blk_rq_bytes(). Convert all non-IDE direct users to accessors. IDE will be converted in a separate patch. Boaz: spotted incorrect data_len/resid_len conversion in osd. [ Impact: convert direct rq->data_len usages to blk_rq_bytes() ] Signed-off-by: Tejun Heo Acked-by: Sergei Shtylyov Cc: Pete Zaitcev Cc: Eric Moore Cc: Markus Lidel Cc: Darrick J. Wong Cc: James Bottomley Cc: Eric Moore Cc: Boaz Harrosh Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/libsas/sas_expander.c | 8 ++++---- drivers/scsi/libsas/sas_host_smp.c | 18 +++++++++--------- drivers/scsi/mpt2sas/mpt2sas_transport.c | 21 +++++++++++---------- drivers/scsi/osd/osd_initiator.c | 4 ++-- drivers/scsi/scsi_lib.c | 13 ++++++------- drivers/scsi/scsi_tgt_lib.c | 2 +- 6 files changed, 33 insertions(+), 33 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 6605ec905cc..531af9ed719 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1927,13 +1927,13 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, /* do we need to support multiple segments? */ if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { printk("%s: multiple segments req %u %u, rsp %u %u\n", - __func__, req->bio->bi_vcnt, req->data_len, - rsp->bio->bi_vcnt, rsp->data_len); + __func__, req->bio->bi_vcnt, blk_rq_bytes(req), + rsp->bio->bi_vcnt, blk_rq_bytes(rsp)); return -EINVAL; } - ret = smp_execute_task(dev, bio_data(req->bio), req->data_len, - bio_data(rsp->bio), rsp->data_len); + ret = smp_execute_task(dev, bio_data(req->bio), blk_rq_bytes(req), + bio_data(rsp->bio), blk_rq_bytes(rsp)); if (ret > 0) { /* positive number is the untransferred residual */ rsp->resid_len = ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index 89952edd0be..be9a951b977 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -137,21 +137,21 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, int error = -EINVAL; /* eight is the minimum size for request and response frames */ - if (req->data_len < 8 || rsp->data_len < 8) + if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8) goto out; - if (bio_offset(req->bio) + req->data_len > PAGE_SIZE || - bio_offset(rsp->bio) + rsp->data_len > PAGE_SIZE) { + if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE || + bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) { shost_printk(KERN_ERR, shost, "SMP request/response frame crosses page boundary"); goto out; } - req_data = kzalloc(req->data_len, GFP_KERNEL); + req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL); /* make sure frame can always be built ... we copy * back only the requested length */ - resp_data = kzalloc(max(rsp->data_len, 128U), GFP_KERNEL); + resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL); if (!req_data || !resp_data) { error = -ENOMEM; @@ -160,7 +160,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, local_irq_disable(); buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio); - memcpy(req_data, buf, req->data_len); + memcpy(req_data, buf, blk_rq_bytes(req)); kunmap_atomic(buf - bio_offset(req->bio), KM_USER0); local_irq_enable(); @@ -176,8 +176,8 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; - req->resid_len = req->data_len; - rsp->resid_len = rsp->data_len; + req->resid_len = blk_rq_bytes(req); + rsp->resid_len = blk_rq_bytes(rsp); switch (req_data[1]) { case SMP_REPORT_GENERAL: @@ -264,7 +264,7 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, local_irq_disable(); buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio); - memcpy(buf, resp_data, rsp->data_len); + memcpy(buf, resp_data, blk_rq_bytes(rsp)); flush_kernel_dcache_page(bio_page(rsp->bio)); kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0); local_irq_enable(); diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index 53759c566bf..af95a449930 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1041,7 +1041,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, if (req->bio->bi_vcnt > 1 || rsp->bio->bi_vcnt > 1) { printk(MPT2SAS_ERR_FMT "%s: multiple segments req %u %u, " "rsp %u %u\n", ioc->name, __func__, req->bio->bi_vcnt, - req->data_len, rsp->bio->bi_vcnt, rsp->data_len); + blk_rq_bytes(req), rsp->bio->bi_vcnt, blk_rq_bytes(rsp)); return -EINVAL; } @@ -1104,7 +1104,7 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, *((u64 *)&mpi_request->SASAddress) = (rphy) ? cpu_to_le64(rphy->identify.sas_address) : cpu_to_le64(ioc->sas_hba.sas_address); - mpi_request->RequestDataLength = cpu_to_le16(req->data_len - 4); + mpi_request->RequestDataLength = cpu_to_le16(blk_rq_bytes(req) - 4); psge = &mpi_request->SGL; /* WRITE sgel first */ @@ -1112,13 +1112,13 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; dma_addr_out = pci_map_single(ioc->pdev, bio_data(req->bio), - req->data_len, PCI_DMA_BIDIRECTIONAL); + blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_out) { mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); goto unmap; } - ioc->base_add_sg_single(psge, sgl_flags | (req->data_len - 4), + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(req) - 4), dma_addr_out); /* incr sgel */ @@ -1129,14 +1129,14 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST); sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; - dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), - rsp->data_len, PCI_DMA_BIDIRECTIONAL); + dma_addr_in = pci_map_single(ioc->pdev, bio_data(rsp->bio), + blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); if (!dma_addr_in) { mpt2sas_base_free_smid(ioc, le16_to_cpu(smid)); goto unmap; } - ioc->base_add_sg_single(psge, sgl_flags | (rsp->data_len + 4), + ioc->base_add_sg_single(psge, sgl_flags | (blk_rq_bytes(rsp) + 4), dma_addr_in); dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - " @@ -1170,7 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - rsp->resid_len = rsp->data_len - mpi_reply->ResponseDataLength; + rsp->resid_len = blk_rq_bytes(rsp) - + mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); @@ -1186,10 +1187,10 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, unmap: if (dma_addr_out) - pci_unmap_single(ioc->pdev, dma_addr_out, req->data_len, + pci_unmap_single(ioc->pdev, dma_addr_out, blk_rq_bytes(req), PCI_DMA_BIDIRECTIONAL); if (dma_addr_in) - pci_unmap_single(ioc->pdev, dma_addr_in, rsp->data_len, + pci_unmap_single(ioc->pdev, dma_addr_in, blk_rq_bytes(rsp), PCI_DMA_BIDIRECTIONAL); out: diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index 2a5f0777148..d178a8b799e 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1299,7 +1299,7 @@ int osd_finalize_request(struct osd_request *or, return ret; } OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", - _LLU(or->out.total_bytes), or->out.req->data_len); + _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req)); } if (or->in.bio) { ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); @@ -1308,7 +1308,7 @@ int osd_finalize_request(struct osd_request *or, return ret; } OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", - _LLU(or->in.total_bytes), or->in.req->data_len); + _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req)); } or->out.pad_buff = sg_out_pad_buffer; diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 39b3acfc0dd..3d16c70fbde 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -682,14 +682,13 @@ EXPORT_SYMBOL(scsi_release_buffers); static void scsi_end_bidi_request(struct scsi_cmnd *cmd) { struct request *req = cmd->request; - unsigned int dlen = req->data_len; - unsigned int next_dlen = req->next_rq->data_len; req->resid_len = scsi_out(cmd)->resid; req->next_rq->resid_len = scsi_in(cmd)->resid; /* The req and req->next_rq have not been completed */ - BUG_ON(blk_end_bidi_request(req, 0, dlen, next_dlen)); + BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req), + blk_rq_bytes(req->next_rq))); scsi_release_buffers(cmd); @@ -966,7 +965,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, BUG_ON(count > sdb->table.nents); sdb->table.nents = count; if (blk_pc_request(req)) - sdb->length = req->data_len; + sdb->length = blk_rq_bytes(req); else sdb->length = blk_rq_sectors(req) << 9; return BLKPREP_OK; @@ -1087,21 +1086,21 @@ int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) if (unlikely(ret)) return ret; } else { - BUG_ON(req->data_len); + BUG_ON(blk_rq_bytes(req)); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); req->buffer = NULL; } cmd->cmd_len = req->cmd_len; - if (!req->data_len) + if (!blk_rq_bytes(req)) cmd->sc_data_direction = DMA_NONE; else if (rq_data_dir(req) == WRITE) cmd->sc_data_direction = DMA_TO_DEVICE; else cmd->sc_data_direction = DMA_FROM_DEVICE; - cmd->transfersize = req->data_len; + cmd->transfersize = blk_rq_bytes(req); cmd->allowed = req->retries; return BLKPREP_OK; } diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c index 48ba413f7f6..10303272ba4 100644 --- a/drivers/scsi/scsi_tgt_lib.c +++ b/drivers/scsi/scsi_tgt_lib.c @@ -387,7 +387,7 @@ static int scsi_map_user_pages(struct scsi_tgt_cmd *tcmd, struct scsi_cmnd *cmd, * we use REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the * length for us. */ - cmd->sdb.length = rq->data_len; + cmd->sdb.length = blk_rq_bytes(rq); return 0; -- cgit v1.2.2 From 1011c1b9f2e45ce7c6e38888d2b83936aec38771 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 7 May 2009 22:24:45 +0900 Subject: block: blk_rq_[cur_]_{sectors|bytes}() usage cleanup With the previous changes, the followings are now guaranteed for all requests in any valid state. * blk_rq_sectors() == blk_rq_bytes() >> 9 * blk_rq_cur_sectors() == blk_rq_cur_bytes() >> 9 Clean up accessor usages. Notable changes are * nbd,i2o_block: end_all used instead of explicit byte count * scsi_lib: unnecessary conditional on request type removed [ Impact: cleanup ] Signed-off-by: Tejun Heo Cc: Paul Clements Cc: Pete Zaitcev Cc: Alex Dubov Cc: Markus Lidel Cc: David Woodhouse Cc: James Bottomley Cc: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 3d16c70fbde..ee308f6f798 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,7 +546,7 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = blk_rq_sectors(req) << 9; + int leftover = blk_rq_bytes(req); if (blk_pc_request(req)) leftover = req->resid_len; @@ -964,10 +964,7 @@ static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, count = blk_rq_map_sg(req->q, req, sdb->table.sgl); BUG_ON(count > sdb->table.nents); sdb->table.nents = count; - if (blk_pc_request(req)) - sdb->length = blk_rq_bytes(req); - else - sdb->length = blk_rq_sectors(req) << 9; + sdb->length = blk_rq_bytes(req); return BLKPREP_OK; } -- cgit v1.2.2 From 9934c8c04561413609d2bc38c6b9f268cba774a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 8 May 2009 11:54:16 +0900 Subject: block: implement and enforce request peek/start/fetch Till now block layer allowed two separate modes of request execution. A request is always acquired from the request queue via elv_next_request(). After that, drivers are free to either dequeue it or process it without dequeueing. Dequeue allows elv_next_request() to return the next request so that multiple requests can be in flight. Executing requests without dequeueing has its merits mostly in allowing drivers for simpler devices which can't do sg to deal with segments only without considering request boundary. However, the benefit this brings is dubious and declining while the cost of the API ambiguity is increasing. Segment based drivers are usually for very old or limited devices and as converting to dequeueing model isn't difficult, it doesn't justify the API overhead it puts on block layer and its more modern users. Previous patches converted all block low level drivers to dequeueing model. This patch completes the API transition by... * renaming elv_next_request() to blk_peek_request() * renaming blkdev_dequeue_request() to blk_start_request() * adding blk_fetch_request() which is combination of peek and start * disallowing completion of queued (not started) requests * applying new API to all LLDs Renamings are for consistency and to break out of tree code so that it's apparent that out of tree drivers need updating. [ Impact: block request issue API cleanup, no functional change ] Signed-off-by: Tejun Heo Cc: Rusty Russell Cc: James Bottomley Cc: Mike Miller Cc: unsik Kim Cc: Paul Clements Cc: Tim Waugh Cc: Geert Uytterhoeven Cc: David S. Miller Cc: Laurent Vivier Cc: Jeff Garzik Cc: Jeremy Fitzhardinge Cc: Grant Likely Cc: Adrian McMenamin Cc: Stephen Rothwell Cc: Bartlomiej Zolnierkiewicz Cc: Borislav Petkov Cc: Sergei Shtylyov Cc: Alex Dubov Cc: Pierre Ossman Cc: David Woodhouse Cc: Markus Lidel Cc: Stefan Weinhuber Cc: Martin Schwidefsky Cc: Pete Zaitcev Cc: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 10 +++++----- drivers/scsi/scsi_transport_sas.c | 4 +--- 2 files changed, 6 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ee308f6f798..b12750f8216 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1207,7 +1207,7 @@ int scsi_prep_return(struct request_queue *q, struct request *req, int ret) break; case BLKPREP_DEFER: /* - * If we defer, the elv_next_request() returns NULL, but the + * If we defer, the blk_peek_request() returns NULL, but the * queue must be restarted, so we plug here if no returning * command will automatically do that. */ @@ -1385,7 +1385,7 @@ static void scsi_kill_request(struct request *req, struct request_queue *q) struct scsi_target *starget = scsi_target(sdev); struct Scsi_Host *shost = sdev->host; - blkdev_dequeue_request(req); + blk_start_request(req); if (unlikely(cmd == NULL)) { printk(KERN_CRIT "impossible request in %s.\n", @@ -1477,7 +1477,7 @@ static void scsi_request_fn(struct request_queue *q) if (!sdev) { printk("scsi: killing requests for dead queue\n"); - while ((req = elv_next_request(q)) != NULL) + while ((req = blk_peek_request(q)) != NULL) scsi_kill_request(req, q); return; } @@ -1498,7 +1498,7 @@ static void scsi_request_fn(struct request_queue *q) * that the request is fully prepared even if we cannot * accept it. */ - req = elv_next_request(q); + req = blk_peek_request(q); if (!req || !scsi_dev_queue_ready(q, sdev)) break; @@ -1514,7 +1514,7 @@ static void scsi_request_fn(struct request_queue *q) * Remove the request from the request list. */ if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req))) - blkdev_dequeue_request(req); + blk_start_request(req); sdev->device_busy++; spin_unlock(q->queue_lock); diff --git a/drivers/scsi/scsi_transport_sas.c b/drivers/scsi/scsi_transport_sas.c index 50988cbf7b2..d606452297c 100644 --- a/drivers/scsi/scsi_transport_sas.c +++ b/drivers/scsi/scsi_transport_sas.c @@ -163,12 +163,10 @@ static void sas_smp_request(struct request_queue *q, struct Scsi_Host *shost, int (*handler)(struct Scsi_Host *, struct sas_rphy *, struct request *); while (!blk_queue_plugged(q)) { - req = elv_next_request(q); + req = blk_fetch_request(q); if (!req) break; - blkdev_dequeue_request(req); - spin_unlock_irq(q->queue_lock); handler = to_sas_internal(shost->transportt)->f->smp_handler; -- cgit v1.2.2 From e6bb7a96c2c36f20c05ef648f15bd3c2b1834c78 Mon Sep 17 00:00:00 2001 From: FUJITA Tomonori Date: Mon, 11 May 2009 17:56:08 +0900 Subject: scsi: simplify the bidi completion Let's use blk_end_request_all() instead of blk_end_bidi_request(). Signed-off-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 43 +++++++++++++------------------------------ 1 file changed, 13 insertions(+), 30 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index b12750f8216..a54bec99438 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -672,33 +672,6 @@ void scsi_release_buffers(struct scsi_cmnd *cmd) } EXPORT_SYMBOL(scsi_release_buffers); -/* - * Bidi commands Must be complete as a whole, both sides at once. If - * part of the bytes were written and lld returned scsi_in()->resid - * and/or scsi_out()->resid this information will be left in - * req->resid_len and req->next_rq->resid_len. The upper-layer driver - * can decide what to do with this information. - */ -static void scsi_end_bidi_request(struct scsi_cmnd *cmd) -{ - struct request *req = cmd->request; - - req->resid_len = scsi_out(cmd)->resid; - req->next_rq->resid_len = scsi_in(cmd)->resid; - - /* The req and req->next_rq have not been completed */ - BUG_ON(blk_end_bidi_request(req, 0, blk_rq_bytes(req), - blk_rq_bytes(req->next_rq))); - - scsi_release_buffers(cmd); - - /* - * This will goose the queue request function at the end, so we don't - * need to worry about launching another command. - */ - scsi_next_command(cmd); -} - /* * Function: scsi_io_completion() * @@ -772,12 +745,22 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (!sense_deferred) error = -EIO; } + + req->resid_len = scsi_get_resid(cmd); + if (scsi_bidi_cmnd(cmd)) { - /* will also release_buffers */ - scsi_end_bidi_request(cmd); + /* + * Bidi commands Must be complete as a whole, + * both sides at once. + */ + req->next_rq->resid_len = scsi_in(cmd)->resid; + + blk_end_request_all(req, 0); + + scsi_release_buffers(cmd); + scsi_next_command(cmd); return; } - req->resid_len = scsi_get_resid(cmd); } BUG_ON(blk_bidi_rq(req)); /* bidi not support for !blk_pc_request yet */ -- cgit v1.2.2 From e458824f9d32e9bf7700d1eb0d201749af48eee0 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 12 May 2009 08:49:32 +0200 Subject: scsi: fix resid_len mis-conversion in scsi_end_request() Commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f introduced rq->data_len and converted residual count users to it. While converting, it mistakenly converted scsi_end_request() to finish requests with residual count when it wants to do is fully complete the request. Fix it by using blk_end_request_all() instead. This bug was spotted by Boaz Harrosh. Signed-off-by: Tejun Heo Spotted-by: Boaz Harrosh Cc: FUJITA Tomonori Cc: James Bottomley Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a54bec99438..e410d667910 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -546,14 +546,9 @@ static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int error, * to queue the remainder of them. */ if (blk_end_request(req, error, bytes)) { - int leftover = blk_rq_bytes(req); - - if (blk_pc_request(req)) - leftover = req->resid_len; - /* kill remainder if no retrys */ if (error && scsi_noretry_cmd(cmd)) - blk_end_request(req, error, leftover); + blk_end_request_all(req, error); else { if (requeue) { /* -- cgit v1.2.2 From 5f49f63178360b07a095bd33b0d850d60edf7590 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 May 2009 18:33:05 +0900 Subject: block: set rq->resid_len to blk_rq_bytes() on issue In commit c3a4d78c580de4edc9ef0f7c59812fb02ceb037f, while introducing rq->resid_len, the default value of residue count was changed from full count to zero. The conversion was done under the assumption that when a request fails residue count wasn't defined. However, Boaz and James pointed out that this wasn't true and the residue count should be preserved for failed requests too. This patchset restores the original behavior by setting rq->resid_len to blk_rq_bytes(rq) on request start and restoring explicit clearing in affected drivers. While at it, take advantage of the fact that rq->resid_len is set to full count where applicable. * ide-cd: rq->resid_len cleared on pc success * mptsas: req->resid_len cleared on success * sas_expander: rsp/req->resid_len cleared on success * mpt2sas_transport: req->resid_len cleared on success * ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take advantage of initial full count to simplify code Boaz Harrosh spotted bug in resid_len initialization. Fixed as suggested. Signed-off-by: Tejun Heo Acked-by: Borislav Petkov Cc: Boaz Harrosh Cc: James Bottomley Cc: Pete Zaitcev Cc: Bartlomiej Zolnierkiewicz Cc: Sergei Shtylyov Cc: Eric Moore Cc: Darrick J. Wong Signed-off-by: Jens Axboe --- drivers/scsi/libsas/sas_expander.c | 4 ++++ drivers/scsi/libsas/sas_host_smp.c | 3 --- drivers/scsi/mpt2sas/mpt2sas_transport.c | 4 ++-- 3 files changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 531af9ed719..54fa1e42dc4 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1937,7 +1937,11 @@ int sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, if (ret > 0) { /* positive number is the untransferred residual */ rsp->resid_len = ret; + req->resid_len = 0; ret = 0; + } else if (ret == 0) { + rsp->resid_len = 0; + req->resid_len = 0; } return ret; diff --git a/drivers/scsi/libsas/sas_host_smp.c b/drivers/scsi/libsas/sas_host_smp.c index be9a951b977..1bc3b756799 100644 --- a/drivers/scsi/libsas/sas_host_smp.c +++ b/drivers/scsi/libsas/sas_host_smp.c @@ -176,9 +176,6 @@ int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req, resp_data[1] = req_data[1]; resp_data[2] = SMP_RESP_FUNC_UNK; - req->resid_len = blk_rq_bytes(req); - rsp->resid_len = blk_rq_bytes(rsp); - switch (req_data[1]) { case SMP_REPORT_GENERAL: req->resid_len -= 8; diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c index af95a449930..5c65da519e3 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_transport.c +++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c @@ -1170,8 +1170,8 @@ transport_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy, memcpy(req->sense, mpi_reply, sizeof(*mpi_reply)); req->sense_len = sizeof(*mpi_reply); - rsp->resid_len = blk_rq_bytes(rsp) - - mpi_reply->ResponseDataLength; + req->resid_len = 0; + rsp->resid_len -= mpi_reply->ResponseDataLength; } else { dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - no reply\n", ioc->name, __func__)); -- cgit v1.2.2 From bc38bf106c967389a465d926be22c7371abba69d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 17 May 2009 18:56:17 +0300 Subject: libosd: Use new blk_rq_map_kern Now that blk_rq_map_kern will append the buffer onto the request we can use it easily for adding extra segments (eg. attributes) This patch is dependent on a block layer patch titled: [BLOCK] allow blk_rq_map_kern to append to requests Signed-off-by: Boaz Harrosh Signed-off-by: Jens Axboe --- drivers/scsi/osd/osd_initiator.c | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index d178a8b799e..bf66e301866 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -826,26 +826,6 @@ int osd_req_add_set_attr_list(struct osd_request *or, } EXPORT_SYMBOL(osd_req_add_set_attr_list); -static int _append_map_kern(struct request *req, - void *buff, unsigned len, gfp_t flags) -{ - struct bio *bio; - int ret; - - bio = bio_map_kern(req->q, buff, len, flags); - if (IS_ERR(bio)) { - OSD_ERR("Failed bio_map_kern(%p, %d) => %ld\n", buff, len, - PTR_ERR(bio)); - return PTR_ERR(bio); - } - ret = blk_rq_append_bio(req->q, req, bio); - if (ret) { - OSD_ERR("Failed blk_rq_append_bio(%p) => %d\n", bio, ret); - bio_put(bio); - } - return ret; -} - static int _req_append_segment(struct osd_request *or, unsigned padding, struct _osd_req_data_segment *seg, struct _osd_req_data_segment *last_seg, struct _osd_io_info *io) @@ -861,14 +841,14 @@ static int _req_append_segment(struct osd_request *or, else pad_buff = io->pad_buff; - ret = _append_map_kern(io->req, pad_buff, padding, + ret = blk_rq_map_kern(io->req->q, io->req, pad_buff, padding, or->alloc_flags); if (ret) return ret; io->total_bytes += padding; } - ret = _append_map_kern(io->req, seg->buff, seg->total_bytes, + ret = blk_rq_map_kern(io->req->q, io->req, seg->buff, seg->total_bytes, or->alloc_flags); if (ret) return ret; -- cgit v1.2.2 From c29b70f6ee4f2fa3ef07f55bc9082945861e5391 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 17 May 2009 18:58:41 +0300 Subject: libosd: Use of new blk_make_request Use new blk_make_request() to allocate a request from bio and avoid using deprecated blk_rq_append_bio(). This patch is dependent on a block layer patch titled: [BLOCK] New blk_make_request() takes bio returns request This is the last usage of blk_rq_append_bio in osd, it can now be un-exported. Signed-off-by: Boaz Harrosh CC: Jeff Garzik CC: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/osd/osd_initiator.c | 48 +++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 25 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c index bf66e301866..865ec0f4aa8 100644 --- a/drivers/scsi/osd/osd_initiator.c +++ b/drivers/scsi/osd/osd_initiator.c @@ -1200,6 +1200,21 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or, /* * osd_finalize_request and helpers */ +static struct request *_make_request(struct request_queue *q, bool has_write, + struct _osd_io_info *oii, gfp_t flags) +{ + if (oii->bio) + return blk_make_request(q, oii->bio, flags); + else { + struct request *req; + + req = blk_get_request(q, has_write ? WRITE : READ, flags); + if (unlikely(!req)) + return ERR_PTR(-ENOMEM); + + return req; + } +} static int _init_blk_request(struct osd_request *or, bool has_in, bool has_out) @@ -1208,11 +1223,13 @@ static int _init_blk_request(struct osd_request *or, struct scsi_device *scsi_device = or->osd_dev->scsi_device; struct request_queue *q = scsi_device->request_queue; struct request *req; - int ret = -ENOMEM; + int ret; - req = blk_get_request(q, has_out, flags); - if (!req) + req = _make_request(q, has_out, has_out ? &or->out : &or->in, flags); + if (IS_ERR(req)) { + ret = PTR_ERR(req); goto out; + } or->request = req; req->cmd_type = REQ_TYPE_BLOCK_PC; @@ -1225,9 +1242,10 @@ static int _init_blk_request(struct osd_request *or, or->out.req = req; if (has_in) { /* allocate bidi request */ - req = blk_get_request(q, READ, flags); - if (!req) { + req = _make_request(q, false, &or->in, flags); + if (IS_ERR(req)) { OSD_DEBUG("blk_get_request for bidi failed\n"); + ret = PTR_ERR(req); goto out; } req->cmd_type = REQ_TYPE_BLOCK_PC; @@ -1271,26 +1289,6 @@ int osd_finalize_request(struct osd_request *or, return ret; } - if (or->out.bio) { - ret = blk_rq_append_bio(or->request->q, or->out.req, - or->out.bio); - if (ret) { - OSD_DEBUG("blk_rq_append_bio out failed\n"); - return ret; - } - OSD_DEBUG("out bytes=%llu (bytes_req=%u)\n", - _LLU(or->out.total_bytes), blk_rq_bytes(or->out.req)); - } - if (or->in.bio) { - ret = blk_rq_append_bio(or->request->q, or->in.req, or->in.bio); - if (ret) { - OSD_DEBUG("blk_rq_append_bio in failed\n"); - return ret; - } - OSD_DEBUG("in bytes=%llu (bytes_req=%u)\n", - _LLU(or->in.total_bytes), blk_rq_bytes(or->in.req)); - } - or->out.pad_buff = sg_out_pad_buffer; or->in.pad_buff = sg_in_pad_buffer; -- cgit v1.2.2 From ac36552a52a6ec8563ac0a109e2a0935673f4abb Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Tue, 19 May 2009 19:54:09 +0200 Subject: scsi_lib: remove unused variable The last request completion cleanup in scsi_lib left an unused this_count variable in scsi_io_completion(). (It was used before in a code segment that now uses blk_end_request_all()) Signed-off-by: Boaz Harrosh Acked-by: Tejun Heo Acked-by: FUJITA Tomonori Signed-off-by: Jens Axboe --- drivers/scsi/scsi_lib.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e410d667910..d7c6c752e0a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -706,7 +706,6 @@ EXPORT_SYMBOL(scsi_release_buffers); void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; - int this_count; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; @@ -789,7 +788,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) */ if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL) return; - this_count = blk_rq_bytes(req); error = -EIO; -- cgit v1.2.2 From e1defc4ff0cf57aca6c5e3ff99fa503f5943c1f1 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:49 -0400 Subject: block: Do away with the notion of hardsect_size Until now we have had a 1:1 mapping between storage device physical block size and the logical block sized used when addressing the device. With SATA 4KB drives coming out that will no longer be the case. The sector size will be 4KB but the logical block size will remain 512-bytes. Hence we need to distinguish between the physical block size and the logical ditto. This patch renames hardsect_size to logical_block_size. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/scsi/sd.c | 2 +- drivers/scsi/sr.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 40d2860f235..bcf3bd40bbd 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1510,7 +1510,7 @@ got_data: */ sector_size = 512; } - blk_queue_hardsect_size(sdp->request_queue, sector_size); + blk_queue_logical_block_size(sdp->request_queue, sector_size); { char cap_str_2[10], cap_str_10[10]; diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index fddba53c7fe..cd350dfc121 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -727,7 +727,7 @@ static void get_sectorsize(struct scsi_cd *cd) } queue = cd->device->request_queue; - blk_queue_hardsect_size(queue, sector_size); + blk_queue_logical_block_size(queue, sector_size); return; } -- cgit v1.2.2 From ae03bf639a5027d27270123f5f6e3ee6a412781d Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Fri, 22 May 2009 17:17:50 -0400 Subject: block: Use accessor functions for queue limits Convert all external users of queue limits to using wrapper functions instead of poking the request queue variables directly. Signed-off-by: Martin K. Petersen Signed-off-by: Jens Axboe --- drivers/scsi/sg.c | 15 ++++++++------- drivers/scsi/st.c | 4 ++-- 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 0fc2c0ae769..9bd407fa98e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -289,8 +289,8 @@ sg_open(struct inode *inode, struct file *filp) if (list_empty(&sdp->sfds)) { /* no existing opens on this device */ sdp->sgdebug = 0; q = sdp->device->request_queue; - sdp->sg_tablesize = min(q->max_hw_segments, - q->max_phys_segments); + sdp->sg_tablesize = min(queue_max_hw_segments(q), + queue_max_phys_segments(q)); } if ((sfp = sg_add_sfp(sdp, dev))) filp->private_data = sfp; @@ -909,7 +909,7 @@ sg_ioctl(struct inode *inode, struct file *filp, if (val < 0) return -EINVAL; val = min_t(int, val, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); if (val != sfp->reserve.bufflen) { if (sg_res_in_use(sfp) || sfp->mmap_called) return -EBUSY; @@ -919,7 +919,7 @@ sg_ioctl(struct inode *inode, struct file *filp, return 0; case SG_GET_RESERVED_SIZE: val = min_t(int, sfp->reserve.bufflen, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); return put_user(val, ip); case SG_SET_COMMAND_Q: result = get_user(val, ip); @@ -1059,7 +1059,7 @@ sg_ioctl(struct inode *inode, struct file *filp, return -ENODEV; return scsi_ioctl(sdp->device, cmd_in, p); case BLKSECTGET: - return put_user(sdp->device->request_queue->max_sectors * 512, + return put_user(queue_max_sectors(sdp->device->request_queue) * 512, ip); case BLKTRACESETUP: return blk_trace_setup(sdp->device->request_queue, @@ -1377,7 +1377,8 @@ static Sg_device *sg_alloc(struct gendisk *disk, struct scsi_device *scsidp) sdp->device = scsidp; INIT_LIST_HEAD(&sdp->sfds); init_waitqueue_head(&sdp->o_excl_wait); - sdp->sg_tablesize = min(q->max_hw_segments, q->max_phys_segments); + sdp->sg_tablesize = min(queue_max_hw_segments(q), + queue_max_phys_segments(q)); sdp->index = k; kref_init(&sdp->d_ref); @@ -2055,7 +2056,7 @@ sg_add_sfp(Sg_device * sdp, int dev) sg_big_buff = def_reserved_size; bufflen = min_t(int, sg_big_buff, - sdp->device->request_queue->max_sectors * 512); + queue_max_sectors(sdp->device->request_queue) * 512); sg_build_reserve(sfp, bufflen); SCSI_LOG_TIMEOUT(3, printk("sg_add_sfp: bufflen=%d, k_use_sg=%d\n", sfp->reserve.bufflen, sfp->reserve.k_use_sg)); diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 8681b708344..89bd438e1fe 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -3983,8 +3983,8 @@ static int st_probe(struct device *dev) return -ENODEV; } - i = min(SDp->request_queue->max_hw_segments, - SDp->request_queue->max_phys_segments); + i = min(queue_max_hw_segments(SDp->request_queue), + queue_max_phys_segments(SDp->request_queue)); if (st_max_sg_segs < i) i = st_max_sg_segs; buffer = new_tape_buffer((SDp->host)->unchecked_isa_dma, i); -- cgit v1.2.2