From 62d50addf0774115adaa9e01e09099c3d7daa13d Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Tue, 30 Jan 2007 23:25:41 -0300 Subject: V4L/DVB (5163): Add checks for CAP_SYS_ADMIN to VIDIOC_DBG_G_REGISTER Before, root privileges were only needed to set hardware registers, not to read them. On some hardware, reading from the wrong place at the wrong time can hang the machine. So, to be consistent, root privileges are required to read registers on all hardware. Signed-off-by: Trent Piepho Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/usbvision/usbvision-video.c | 40 +++++++++---------------- 1 file changed, 14 insertions(+), 26 deletions(-) (limited to 'drivers/media/video/usbvision/usbvision-video.c') diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index b6fabeeb8ab..6a61ebcdf13 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -520,25 +520,6 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file, #ifdef CONFIG_VIDEO_ADV_DEBUG /* ioctls to allow direct acces to the NT100x registers */ case VIDIOC_DBG_G_REGISTER: - { - struct v4l2_register *reg = arg; - int errCode; - - if (reg->i2c_id != 0) - return -EINVAL; - /* NT100x has a 8-bit register space */ - errCode = usbvision_read_reg(usbvision, reg->reg&0xff); - if (errCode < 0) { - err("%s: VIDIOC_DBG_G_REGISTER failed: error %d", __FUNCTION__, errCode); - } - else { - reg->val=(unsigned char)errCode; - PDEBUG(DBG_IOCTL, "VIDIOC_DBG_G_REGISTER reg=0x%02X, value=0x%02X", - (unsigned int)reg->reg, reg->val); - errCode = 0; // No error - } - return errCode; - } case VIDIOC_DBG_S_REGISTER: { struct v4l2_register *reg = arg; @@ -548,15 +529,22 @@ static int usbvision_v4l2_do_ioctl(struct inode *inode, struct file *file, return -EINVAL; if (!capable(CAP_SYS_ADMIN)) return -EPERM; - errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); + /* NT100x has a 8-bit register space */ + if (cmd == VIDIOC_DBG_G_REGISTER) + errCode = usbvision_read_reg(usbvision, reg->reg&0xff); + else + errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val); if (errCode < 0) { - err("%s: VIDIOC_DBG_S_REGISTER failed: error %d", __FUNCTION__, errCode); - } - else { - PDEBUG(DBG_IOCTL, "VIDIOC_DBG_S_REGISTER reg=0x%02X, value=0x%02X", - (unsigned int)reg->reg, reg->val); - errCode = 0; + err("%s: VIDIOC_DBG_%c_REGISTER failed: error %d", __FUNCTION__, + cmd == VIDIOC_DBG_G_REGISTER ? 'G' : 'S', errCode); + return errCode; } + if (cmd == VIDIOC_DBG_S_REGISTER) + reg->val = (u8)errCode; + + PDEBUG(DBG_IOCTL, "VIDIOC_DBG_%c_REGISTER reg=0x%02X, value=0x%02X", + cmd == VIDIOC_DBG_G_REGISTER ? 'G' : 'S', + (unsigned int)reg->reg, reg->val); return 0; } #endif -- cgit v1.2.2