aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs
Commit message (Collapse)AuthorAge
* vfs: Implement proper O_SYNC semanticsChristoph Hellwig2009-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
* Merge branch 'for-next' into for-linusJiri Kosina2009-12-07
|\ | | | | | | | | | | Conflicts: kernel/irq/chip.c
| * tree-wide: fix misspelling of "definition" in commentsAdam Buchbinder2009-12-04
| | | | | | | | | | | | | | | | "Definition" is misspelled "defintion" in several comments; this patch fixes them. No code changes. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-04
| | | | | | | | | | | | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2009-11-30
|\ \ | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] Fix sparse warning [CIFS] Duplicate data on appending to some Samba servers [CIFS] fix oops in cifs_lookup during net boot
| * | [CIFS] Fix sparse warningSteve French2009-11-24
| | | | | | | | | | | | | | | | | | Also update CHANGES file Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | [CIFS] Duplicate data on appending to some Samba serversSteve French2009-11-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SMB writes are sent with a starting offset and length. When the server supports the newer SMB trans2 posix open (rather than using the SMB NTCreateX) a file can be opened with SMB_O_APPEND flag, and for that case Samba server assumes that the offset sent in SMBWriteX is unneeded since the write should go to the end of the file - which can cause problems if the write was cached (since the beginning part of a page could be written twice by the client mm). Jeff suggested that masking the flag on posix open on the client is easiest for the time being. Note that recent Samba server also had an unrelated problem with SMB NTCreateX and append (see samba bugzilla bug number 6898) which should not affect current Linux clients (unless cifs Unix Extensions are disabled). The cifs client did not send the O_APPEND flag on posix open before 2.6.29 so the fix is unneeded on early kernels. In the future, for the non-cached case (O_DIRECT, and forcedirectio mounts) it would be possible and useful to send O_APPEND on posix open (for Windows case: FILE_APPEND_DATA but not FILE_WRITE_DATA on SMB NTCreateX) but for cached writes although the vfs sets the offset to end of file it may fragment a write across pages - so we can't send O_APPEND on open (could result in sending part of a page twice). CC: Stable <stable@kernel.org> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * | [CIFS] fix oops in cifs_lookup during net bootSteve French2009-11-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes bugzilla.kernel.org bug number 14641 Lookup called during network boot (network root filesystem for diskless workstation) has case where nd is null in lookup. This patch fixes that in cifs_lookup. (Shirish noted that 2.6.30 and 2.6.31 stable need the same check) Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com> Acked-by: Jeff Layton <jlayton@redhat.com> Tested-by: Vladimir Stavrinov <vs@inist.ru> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | | SLOW_WORK: Fix CIFS to pass THIS_MODULE to slow_work_register_user()David Howells2009-11-20
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As of the patch: SLOW_WORK: Wait for outstanding work items belonging to a module to clear Wait for outstanding slow work items belonging to a module to clear when unregistering that module as a user of the facility. This prevents the put_ref code of a work item from being taken away before it returns. slow_work_register_user() takes a module pointer as an argument. CIFS must now pass THIS_MODULE as that argument, lest the following error be observed: fs/cifs/cifsfs.c: In function 'init_cifs': fs/cifs/cifsfs.c:1040: error: too few arguments to function 'slow_work_register_user' Signed-off-by: David Howells <dhowells@redhat.com>
* | cifs: clear server inode number flag while autodisablingSuresh Jayaraman2009-11-16
| | | | | | | | | | | | | | | | | | | | | | | | Fix the commit ec06aedd44 that intended to turn off querying for server inode numbers when server doesn't consistently support inode numbers. Presumably the commit didn't actually clear the CIFS_MOUNT_SERVER_INUM flag, perhaps a typo. Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | cifs: don't use CIFSGetSrvInodeNumber in is_path_accessibleJeff Layton2009-11-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to verify the accessibility of the root inode and then falls back to doing a full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report of a server that returns NT_STATUS_INTERNAL_ERROR rather than something that translates to EOPNOTSUPP. Rather than trying to be clever with that call, just have is_path_accessible do a normal QPathInfo. That call is widely supported and it shouldn't increase the overhead significantly. Cc: Stable <stable@kernel.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | cifs: clean up handling when server doesn't consistently support inode numbersJeff Layton2009-11-06
|/ | | | | | | | | | | | | | | | | | It's possible that a server will return a valid FileID when we query the FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers when we do a FindFile with an infolevel of SMB_FIND_FILE_ID_FULL_DIR_INFO. In this situation turn off querying for server inode numbers, generate a warning for the user and just generate an inode number using iunique. Once we generate any inode number with iunique we can no longer use any server inode numbers or we risk collisions, so ensure that we don't do that in cifs_get_inode_info either. Cc: Stable <stable@kernel.org> Reported-by: Timothy Normand Miller <theosib@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session()Steve French2009-10-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | trivial bug in fs/cifs/connect.c . The bug is caused by fail of extract_hostname() when mounting cifs file system. This is the situation when I noticed this bug. % sudo mount -t cifs //192.168.10.208 mountpoint -o options... Then my kernel says, [ 1461.807776] ------------[ cut here ]------------ [ 1461.807781] kernel BUG at mm/slab.c:521! [ 1461.807784] invalid opcode: 0000 [#2] PREEMPT SMP [ 1461.807790] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:09:02.0/resource [ 1461.807793] CPU 0 [ 1461.807796] Modules linked in: nls_iso8859_1 usbhid sbp2 uhci_hcd ehci_hcd i2c_i801 ohci1394 ieee1394 psmouse serio_raw pcspkr sky2 usbcore evdev [ 1461.807816] Pid: 3446, comm: mount Tainted: G D 2.6.32-rc2-vanilla [ 1461.807820] RIP: 0010:[<ffffffff810b888e>] [<ffffffff810b888e>] kfree+0x63/0x156 [ 1461.807829] RSP: 0018:ffff8800b4f7fbb8 EFLAGS: 00010046 [ 1461.807832] RAX: ffffea00033fff98 RBX: ffff8800afbae7e2 RCX: 0000000000000000 [ 1461.807836] RDX: ffffea0000000000 RSI: 000000000000005c RDI: ffffffffffffffea [ 1461.807839] RBP: ffff8800b4f7fbf8 R08: 0000000000000001 R09: 0000000000000000 [ 1461.807842] R10: 0000000000000000 R11: ffff8800b4f7fbf8 R12: 00000000ffffffea [ 1461.807845] R13: ffff8800afb23000 R14: ffff8800b4f87bc0 R15: ffffffffffffffea [ 1461.807849] FS: 00007f52b6f187c0(0000) GS:ffff880007600000(0000) knlGS:0000000000000000 [ 1461.807852] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1461.807855] CR2: 0000000000613000 CR3: 00000000af8f9000 CR4: 00000000000006f0 [ 1461.807858] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1461.807861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1461.807865] Process mount (pid: 3446, threadinfo ffff8800b4f7e000, task ffff8800950e4380) [ 1461.807867] Stack: [ 1461.807869] 0000000000000202 0000000000000282 ffff8800b4f7fbf8 ffff8800afbae7e2 [ 1461.807876] <0> 00000000ffffffea ffff8800afb23000 ffff8800b4f87bc0 ffff8800b4f7fc28 [ 1461.807884] <0> ffff8800b4f7fcd8 ffffffff81159f6d ffffffff81147bc2 ffffffff816bfb48 [ 1461.807892] Call Trace: [ 1461.807899] [<ffffffff81159f6d>] cifs_get_tcp_session+0x440/0x44b [ 1461.807904] [<ffffffff81147bc2>] ? find_nls+0x1c/0xe9 [ 1461.807909] [<ffffffff8115b889>] cifs_mount+0x16bc/0x2167 [ 1461.807917] [<ffffffff814455bd>] ? _spin_unlock+0x30/0x4b [ 1461.807923] [<ffffffff81150da9>] cifs_get_sb+0xa5/0x1a8 [ 1461.807928] [<ffffffff810c1b94>] vfs_kern_mount+0x56/0xc9 [ 1461.807933] [<ffffffff810c1c64>] do_kern_mount+0x47/0xe7 [ 1461.807938] [<ffffffff810d8632>] do_mount+0x712/0x775 [ 1461.807943] [<ffffffff810d671f>] ? copy_mount_options+0xcf/0x132 [ 1461.807948] [<ffffffff810d8714>] sys_mount+0x7f/0xbf [ 1461.807953] [<ffffffff8144509a>] ? lockdep_sys_exit_thunk+0x35/0x67 [ 1461.807960] [<ffffffff81011cc2>] system_call_fastpath+0x16/0x1b [ 1461.807963] Code: 00 00 00 00 ea ff ff 48 c1 e8 0c 48 6b c0 68 48 01 d0 66 83 38 00 79 04 48 8b 40 10 66 83 38 00 79 04 48 8b 40 10 80 38 00 78 04 <0f> 0b eb fe 4c 8b 70 58 4c 89 ff 41 8b 76 4c e8 b8 49 fb ff e8 [ 1461.808022] RIP [<ffffffff810b888e>] kfree+0x63/0x156 [ 1461.808027] RSP <ffff8800b4f7fbb8> [ 1461.808031] ---[ end trace ffe26fcdc72c0ce4 ]--- The reason of this bug is that the error handling code of cifs_get_tcp_session() calls kfree() when corresponding kmalloc() failed. (The kmalloc() is called by extract_hostname().) Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> CC: Stable <stable@kernel.org> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2009-09-26
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix locking and list handling code in cifs_open and its helper [CIFS] Remove build warning cifs: fix problems with last two commits [CIFS] Fix build break when keys support turned off cifs: eliminate cifs_init_private cifs: convert oplock breaks to use slow_work facility (try #4) cifs: have cifsFileInfo hold an extra inode reference cifs: take read lock on GlobalSMBSes_lock in is_valid_oplock_break cifs: remove cifsInodeInfo.oplockPending flag cifs: fix oplock request handling in posix codepath [CIFS] Re-enable Lanman security
| * cifs: fix locking and list handling code in cifs_open and its helperJeff Layton2009-09-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch to remove cifs_init_private introduced a locking imbalance. It didn't remove the leftover list addition code and the unlocking in that function. cifs_new_fileinfo does the list addition now, so there should be no need to do it outside of that function. pCifsInode will never be NULL, so we don't need to check for that. This patch also gets rid of the ugly locking and unlocking across function calls. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Remove build warningSteve French2009-09-24
| | | | | | | | | | Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: fix problems with last two commitsJeff Layton2009-09-24
| | | | | | | | | | | | | | | | | | | | Fix problems with commits: 086f68bd97126618ecb2dcff5f766f3a21722df7 3bc303c254335dbd7c7012cc1760b12f1d5514d3 Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Fix build break when keys support turned offSteve French2009-09-24
| | | | | | | | | | Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: eliminate cifs_init_privateJeff Layton2009-09-24
| | | | | | | | | | | | | | | | | | | | ...it does the same thing as cifs_fill_fileinfo, but doesn't handle the flist ordering correctly. Also rename cifs_fill_fileinfo to a more descriptive name and have it take an open flags arg instead of just a write_only flag. That makes the logic in the callers a little simpler. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: convert oplock breaks to use slow_work facility (try #4)Jeff Layton2009-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the fourth respin of the patch to convert oplock breaks to use the slow_work facility. A customer of ours was testing a backport of one of the earlier patchsets, and hit a "Busy inodes after umount..." problem. An oplock break job had raced with a umount, and the superblock got torn down and its memory reused. When the oplock break job tried to dereference the inode->i_sb, the kernel oopsed. This patchset has the oplock break job hold an inode and vfsmount reference until the oplock break completes. With this, there should be no need to take a tcon reference (the vfsmount implicitly holds one already). Currently, when an oplock break comes in there's a chance that the oplock break job won't occur if the allocation of the oplock_q_entry fails. There are also some rather nasty races in the allocation and handling these structs. Rather than allocating oplock queue entries when an oplock break comes in, add a few extra fields to the cifsFileInfo struct. Get rid of the dedicated cifs_oplock_thread as well and queue the oplock break job to the slow_work thread pool. This approach also has the advantage that the oplock break jobs can potentially run in parallel rather than be serialized like they are today. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: have cifsFileInfo hold an extra inode referenceJeff Layton2009-09-15
| | | | | | | | | | | | | | | | | | It's possible that this struct will outlive the filp to which it is attached. If it does and it needs to do some work on the inode, then it'll need a reference. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: take read lock on GlobalSMBSes_lock in is_valid_oplock_breakJeff Layton2009-09-15
| | | | | | | | | | | | | | | | ...rather than a write lock. It doesn't change the list so a read lock should be sufficient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: remove cifsInodeInfo.oplockPending flagJeff Layton2009-09-15
| | | | | | | | | | | | | | It's set on oplock break but nothing ever looks at it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * cifs: fix oplock request handling in posix codepathJeff Layton2009-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cifs_posix_open takes a "poplock" argument that's intended to be used in the actual posix open call to set the "Flags" field. It ignores this value however and declares an "oplock" parameter on the stack that it passes uninitialized to the CIFSPOSIXOpen function. Not only does this mean that the oplock request flags are bogus, but the result that's expected to be in that variable is unchanged. Fix this, and also clean up the type of the oplock parameter used. Since it's expected to be __u32, we should use that everywhere and not implicitly cast it from a signed type. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
| * [CIFS] Re-enable Lanman securityChuck Ebbert2009-09-15
| | | | | | | | | | | | | | | | | | | | | | commit ac68392460ffefed13020967bae04edc4d3add06 ("[CIFS] Allow raw ntlmssp code to be enabled with sec=ntlmssp") added a new bit to the allowed security flags mask but seems to have inadvertently removed Lanman security from the allowed flags. Add it back. CC: Stable <stable@kernel.org> Signed-off-by: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* | truncate: use new helpersnpiggin@suse.de2009-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update some fs code to make use of new helper functions introduced in the previous patch. Should be no significant change in behaviour (except CIFS now calls send_sig under i_lock, via inode_newsize_ok). Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Cc: linux-nfs@vger.kernel.org Cc: Trond.Myklebust@netapp.com Cc: linux-cifs-client@lists.samba.org Cc: sfrench@samba.org Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | fs: Make unload_nls() NULL pointer safeThomas Gleixner2009-09-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most call sites of unload_nls() do: if (nls) unload_nls(nls); Check the pointer inside unload_nls() like we do in kfree() and simplify the call sites. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steve French <sfrench@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: Anton Altaparmakov <aia21@cantab.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-09-22
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) trivial: fix typo in aic7xxx comment trivial: fix comment typo in drivers/ata/pata_hpt37x.c trivial: typo in kernel-parameters.txt trivial: fix typo in tracing documentation trivial: add __init/__exit macros in drivers/gpio/bt8xxgpio.c trivial: add __init macro/ fix of __exit macro location in ipmi_poweroff.c trivial: remove unnecessary semicolons trivial: Fix duplicated word "options" in comment trivial: kbuild: remove extraneous blank line after declaration of usage() trivial: improve help text for mm debug config options trivial: doc: hpfall: accept disk device to unload as argument trivial: doc: hpfall: reduce risk that hpfall can do harm trivial: SubmittingPatches: Fix reference to renumbered step trivial: fix typos "man[ae]g?ment" -> "management" trivial: media/video/cx88: add __init/__exit macros to cx88 drivers trivial: fix typo in CONFIG_DEBUG_FS in gcov doc trivial: fix missing printk space in amd_k7_smp_check trivial: fix typo s/ketymap/keymap/ in comment trivial: fix typo "to to" in multiple files trivial: fix typos in comments s/DGBU/DBGU/ ...
| * | trivial: remove unnecessary semicolonsJoe Perches2009-09-21
| |/ | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | const: mark remaining inode_operations as constAlexey Dobriyan2009-09-22
| | | | | | | | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | const: make struct super_block::s_qcop constAlexey Dobriyan2009-09-22
|/ | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cifs: consolidate reconnect logic in smb_init routinesJeff Layton2009-09-03
| | | | | | | | | There's a large cut and paste chunk of code in smb_init and small_smb_init to handle reconnects. Break it out into a separate function, clean it up and have both routines call it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: Replace wrtPending with a real reference countDave Kleikamp2009-09-01
| | | | | | | | | | | | | | | Currently, cifs_close() tries to wait until all I/O is complete and then frees the file private data. If I/O does not completely in a reasonable amount of time it frees the structure anyway, leaving a potential use- after-free situation. This patch changes the wrtPending counter to a complete reference count and lets the last user free the structure. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Tested-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: protect GlobalOplock_Q with its own spinlockJeff Layton2009-09-01
| | | | | | | | | | | Right now, the GlobalOplock_Q is protected by the GlobalMid_Lock. That lock is also used for completely unrelated purposes (mostly for managing the global mid queue). Give the list its own dedicated spinlock (cifs_oplock_lock) and rename the list to cifs_oplock_list to eliminate the camel-case. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: use tcon pointer in cifs_show_optionsJeff Layton2009-09-01
| | | | | | | | | | | Minor nit: we already have a tcon pointer so we don't need to dereference cifs_sb again. Also initialize the vars in the declaration. Reported-by: Peter Staubach <staubach@redhat.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: send IPv6 addr in upcall with colon delimitersJeff Layton2009-09-01
| | | | | | | | Make it easier on the upcall program by adding ':' delimiters between each group of hex digits. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] Fix checkpatch warningsSteve French2009-09-01
| | | | | | Also update version number to 1.61 Signed-off-by: Steve French <sfrench@us.ibm.com>
* PATCH] cifs: fix broken mounts when a SSH tunnel is used (try #4)Suresh Jayaraman2009-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One more try.. It seems there is a regression that got introduced while Jeff fixed all the mount/umount races. While attempting to find whether a tcp session is already existing, we were not checking whether the "port" used are the same. When a second mount is attempted with a different "port=" option, it is being ignored. Because of this the cifs mounts that uses a SSH tunnel appears to be broken. Steps to reproduce: 1. create 2 shares # SSH Tunnel a SMB session 2. ssh -f -L 6111:127.0.0.1:445 root@localhost "sleep 86400" 3. ssh -f -L 6222:127.0.0.1:445 root@localhost "sleep 86400" 4. tcpdump -i lo 6111 & 5. mkdir -p /mnt/mnt1 6. mkdir -p /mnt/mnt2 7. mount.cifs //localhost/a /mnt/mnt1 -o username=guest,ip=127.0.0.1,port=6111 #(shows tcpdump activity on port 6111) 8. mount.cifs //localhost/b /mnt/mnt2 -o username=guest,ip=127.0.0.1,port=6222 #(shows tcpdump activity only on port 6111 and not on 6222 Fix by adding a check to compare the port _only_ if the user tries to override the tcp port with "port=" option, before deciding that an existing tcp session is found. Also, clean up a bit by replacing if-else if by a switch statment while at it as suggested by Jeff. Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] Memory leak in ntlmv2 hash calculationAlexander Strakh2009-09-01
| | | | | | | | | | | | | | | in function calc_ntlmv2_hash memory is not released. 1. If in the line 333 we successfully allocate memory and assign it to pctxt variable: pctxt = kmalloc(sizeof(struct HMACMD5Context), GFP_KERNEL); then we go to line 376 and exit wihout releasing memory pointed to by pctxt variable. Add a memory releasing for pctxt variable before exit from function calc_ntlmv2_hash. Signed-off-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] potential NULL dereference in parse_DFS_referrals()Steve French2009-08-31
| | | | | | | | | memory allocation may fail, prevent a NULL dereference Pointed out by Roel Kluin CC: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] Update readme to reflect forceuid mount parmsSteve French2009-08-03
| | | | Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: Read buffer overflowRoel Kluin2009-08-03
| | | | | | | | Check whether index is within bounds before testing the element. Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: show noforceuid/noforcegid mount options (try #2)Jeff Layton2009-08-03
| | | | | | | Since forceuid is the default, we now need to show when it's disabled. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: reinstate original behavior when uid=/gid= options are specifiedJeff Layton2009-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the regression reported here: http://bugzilla.kernel.org/show_bug.cgi?id=13861 commit 4ae1507f6d266d0cc3dd36e474d83aad70fec9e4 changed the default behavior when the uid= or gid= option was specified for a mount. The existing behavior was to always clobber the ownership information provided by the server when these options were specified. The above commit changed this behavior so that these options simply provided defaults when the server did not provide this information (unless "forceuid" or "forcegid" were specified) This patch reverts this change so that the default behavior is restored. It also adds "noforceuid" and "noforcegid" options to make it so that ownership information from the server is preserved, even when the mount has uid= or gid= options specified. It also adds a couple of printk notices that pop up when forceuid or forcegid options are specified without a uid= or gid= option. Reported-by: Tom Chiverton <bugzilla.kernel.org@falkensweb.com> Reviewed-by: Shirish Pargaonkar <shirishp@us.ibm.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] Updates fs/cifs/CHANGESSteve French2009-07-29
| | | | Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: fix error handling in mount-time DFS referral chasing codeJeff Layton2009-07-27
| | | | | | | | | | | | If the referral is malformed or the hostname can't be resolved, then the current code generates an oops. Fix it to handle these errors gracefully. Reported-by: Sandro Mathys <sm@sandro-mathys.ch> Acked-by: Igor Mammedov <niallain@gmail.com> CC: Stable <stable@kernel.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* [CIFS] fix sparse warningSteve French2009-07-22
| | | | Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: fix sb->s_maxbytes so that it casts properly to a signed valueJeff Layton2009-07-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This off-by-one bug causes sendfile() to not work properly. When a task calls sendfile() on a file on a CIFS filesystem, the syscall returns -1 and sets errno to EOVERFLOW. do_sendfile uses s_maxbytes to verify the returned offset of the file. The problem there is that this value is cast to a signed value (loff_t). When this is done on the s_maxbytes value that cifs uses, it becomes negative and the comparisons against it fail. Even though s_maxbytes is an unsigned value, it seems that it's not OK to set it in such a way that it'll end up negative when it's cast to a signed value. These casts happen in other codepaths besides sendfile too, but the VFS is a little hard to follow in this area and I can't be sure if there are other bugs that this will fix. It's not clear to me why s_maxbytes isn't just declared as loff_t in the first place, but either way we still need to fix these values to make sendfile work properly. This is also an opportunity to replace the magic bit-shift values here with the standard #defines for this. This fixes the reproducer program I have that does a sendfile and will probably also fix the situation where apache is serving from a CIFS share. Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: disable serverino if server doesn't support itJeff Layton2009-07-22
| | | | | | | | | | A recent regression when dealing with older servers. This bug was introduced when we made serverino the default... When the server can't provide inode numbers, disable it for the mount. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: free nativeFileSystem field before allocating a new oneJeff Layton2009-07-20
| | | | | | | | | ...otherwise, we'll leak this memory if we have to reconnect (e.g. after network failure). Signed-off-by: Jeff Layton <jlayton@redhat.com> CC: Stable <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-25 10:48:30 -0500