aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [WATCHDOG] acquirewdt.c - convert to platform_device part 2Wim Van Sebroeck2007-01-10
| | | | | | | Convert the reboot_notifier into the platform_device's shutdown method Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] acquirewdt.c - convert to platform_deviceWim Van Sebroeck2007-01-10
| | | | | | Convert the acquirewdt watchdog into a platform_device Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] acquirewdt.c - clean before platform_device patchesWim Van Sebroeck2007-01-10
| | | | | | | | | | Clean the current code before we convert the driver to a platform_device. This clean consists of: - document the includes - make sure that the printk's use the module/driver-name - do the exit of the module exactly the opposite of the init of the module Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd_usb.c - get heartbeat from dip switchesWim Van Sebroeck2007-01-09
| | | | | | | | | | | | | | | | | | | | | | The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd.c - e-mail adres updateWim Van Sebroeck2007-01-09
| | | | | | update Simon Machell's e-mail adres Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd_usb.c - get heartbeat from dip switchesWim Van Sebroeck2007-01-08
| | | | | | | | | | | | | | | | | | | | | | The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd_usb.c - document includesWim Van Sebroeck2007-01-08
| | | | | | document and review the include files. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd_pci.c - spinlock fixesWim Van Sebroeck2007-01-07
| | | | | | | the keepalive and get_temperature functions should use spinlocks also. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] pcwd_pci.c - get heartbeat from dip switchesWim Van Sebroeck2007-01-07
| | | | | | | | | | | | | | | | | | | | | | The PCWD cards normally use the heartbeat that is set via the dip-switches of the card. There are only 3 switches, thus 8 combinations that each have a certain heartbeat. The card can however be programmed with a heartbeat from 1 till 65535 seconds. This is what our driver does: it programs the heartbeat on the card. There are however a lot of people that don't know that we set the heartbeat of the watchdog card to the value provided by the heartbeat module parameter. Instead they think that the heartbeat value is the same as set by the dip-switches. This patch changes the driver so that at startup you can take the heartbeat from the dip-switches. You do this by setting the heartbeat module parameter to 0. This patch also makes this the default behaviour. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] fix clk_get() error checkAkinobu Mita2006-12-19
| | | | | | | | | The return value of clk_get() should be checked by IS_ERR(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* [WATCHDOG] s3c2410_wdt exit driver via labelsBen Dooks2006-12-18
| | | | | | | | | | | | | Cleanup the s3c2410_wdt driver's exit point by using labels instead of multiple returns. Also remove the checks for the resources having been allocate in the exit, as we will now either have fully allocated or not allocated the resources at-all. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds2006-12-17
|\ | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] longhaul compile fix. [CPUFREQ] Advise not to use longhaul on VIA C7. [CPUFREQ] set policy->curfreq on initialization [CPUFREQ] Trivial cleanup for acpi read/write port in acpi-cpufreq.c [CPUFREQ] fixes typo in cpufreq.c
| * [CPUFREQ] fixes typo in cpufreq.cDhaval Giani2006-12-13
| | | | | | | | | | | | | | This patch fixes a typo in cpufreq.c From: Dhaval Giani <dhaval.giani@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com>
* | [SUNKBD]: Fix sunkbd_enable(sunkbd, 0); obvious.Fabrice Knevez2006-12-17
| | | | | | | | | | | | | | | | "sunkbd_enable(sunkbd, 0);" has no effect. Adding "sunkbd->enabled = enable" in sunkbd_enable (obvious) Signed-off-by: Fabrice Knevez <nuxdoors@cegetel.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] m68k trivial build fixesAl Viro2006-12-17
| | | | | | | | | | | | | | | | amikbd: missing declaration sun3_NCR5380: more work_struct mess sun3_NCR5380: cast is not an lvalue Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge branch 'for-linus' of ↵Linus Torvalds2006-12-16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Use DEFINE_MUTEX() instead of mutex_init() IB/mthca: Add HCA profile module parameters IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4G IB: Fix ib_dma_alloc_coherent() wrapper
| * | IB/mthca: Use DEFINE_MUTEX() instead of mutex_init()Roland Dreier2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | mthca_device_mutex() can be initialized automatically with DEFINE_MUTEX() rather than explicitly calling mutex_init(). This saves a bit of text and shrinks the source by a line, so we may as well do it.... Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/mthca: Add HCA profile module parametersLeonid Arsh2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add module parameters that enable settting some of the HCA profile values, such as the number of QPs, CQs, etc. Signed-off-by: Leonid Arsh <leonida@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/srp: Fix FMR mapping for 32-bit kernels and addresses above 4GRoland Dreier2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct srp_device.fmr_page_mask was unsigned long, which means that the top part of addresses above 4G was being chopped off on 32-bit architectures. Of course nothing good happens when data from SRP targets is DMAed to the wrong place. Fix this by changing fmr_page_mask to u64, to match the addresses actually used by IB devices. Thanks to Brian Cain <Brian.Cain@ge.com> and David McMillen <davem@systemfabricworks.com> for help diagnosing the bug and testing the fix. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | [PATCH] pata_via: Cable detect errorAlan2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UDMA66 VIA hardware has no controller side cable detect bits we can use. This patch minimally fixes the problem by reporting unknown in this case and using drive side detection. The old drivers/ide code does some additional tricks but those aren't appropriate now we are in -rc. Without this update UDMA66 via controllers run slowly. They don't fail so it's a borderline call whether this is -rc material or not. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] Fix help text for CONFIG_ATA_PIIXAlan2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > Thanks for clarifying Bill, and sorry Alan. ata_piix does indeed work > correctly. The help text is a bit confusing: > > config ATA_PIIX > tristate "Intel PIIX/ICH SATA support" > depends on PCI > help > This option enables support for ICH5/6/7/8 Serial ATA. > If PATA support was enabled previously, this enables > support for select Intel PIIX/ICH PATA host controllers. New help text Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] initializer entry defined twice in pata_rz1000Ira Snyder2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the extra definition of the .error_handler member in the pata_rz1000 driver. Signed-off-by: Ira W. Snyder <kernel@irasnyder.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] ata: fix platform_device_register_simple() error checkAkinobu Mita2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value of platform_device_register_simple() should be checked by IS_ERR(). Cc: Jeff Garzik <jgarzik@pobox.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] ahci: do not mangle saved HOST_CAP while resetting controllerTejun Heo2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not mangle with HOST_CAP while resetting controller. The code is there for a historical reason. The mangling breaks controller feature detection and 0 PORTS_IMPL workaround code. This problem was spotted by Manoj Kasichainula. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Manoj Kasichainula <manoj@io.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [libata] use kmap_atomic(KM_IRQ0) in SCSI simulatorJeff Garzik2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] ata_piix: use piix_host_stop() in ich_pata_opsTejun Heo2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9Jason Gaston2006-12-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | [S390] cio: css_register_subchannel race.Stefan Bader2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Asynchronous probe can release memory of a subchannel before css_get_ssd_info is called. To fix this call css_get_ssd_info before registering with driver core. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] Fix reboot hang on LPARsMichael Holzheu2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] sclp_cpi module license.Christian Borntraeger2006-12-15
| | | | | | | | | | | | | | | | | | | | | sclp_cpi is GPL. Make the module not taint the kernel Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] zcrypt: module unload fixes.Ralph Wuerthner2006-12-15
| | | | | | | | | | | | | | | | | | | | | | | | Add code to reset all queues for a domain and add missing tasklet_kill call to ap bus module exit code. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] Hipersocket multicast queue: make sure outbound handler is calledUrsula Braun2006-12-15
|/ / | | | | | | | | | | | | | | | | | | A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Driver core: Make platform_device_add_data accept a const pointerScott Wood2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | Driver core: "platform_driver_probe() can save codespace": save codespaceAndrew Morton2006-12-13
| | | | | | | | | | | | | | | | | | | | | | This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | driver core: delete virtual directory on class_unregister()Akinobu Mita2006-12-13
| | | | | | | | | | | | | | | | | | Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | [PATCH] Add support for Korenix 16C950-based PCI cardsRussell King2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support to 8250-pci for the Korenix Jetcard PCI serial cards. The JC12xx cards are standard RS232-based serial cards utilising the Oxford 16C950 device. The JC14xx are RS422/RS485-based cards, but in order for these to be supported natively, we will need additional tweaks to the 8250 layers so we can specify some values for the 950's registers. Hence, these two entries are commented out. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2006-12-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Fixup cciss error handling [PATCH] Allow as-iosched to be unloaded [PATCH 2/2] cciss: remove calls to pci_disable_device [PATCH 1/2] cciss: map out more memory for config table [PATCH] Propagate down request sync flag Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
| * | [PATCH] Fixup cciss error handlingJens Axboe2006-12-13
| | | | | | | | | | | | | | | | | | | | | The previous cciss commit removed the err_out_disable_pdev label, but there was still a user of that. Fix that up. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | [PATCH 2/2] cciss: remove calls to pci_disable_devicemike.miller@hp.com2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | [PATCH 1/2] cciss: map out more memory for config tablemike.miller@hp.com2006-12-13
| |/ | | | | | | | | | | | | | | | | This patch maps out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2006-12-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add MAINTAINERS entry for new ams driver hwmon: New AMS hardware monitoring driver hwmon/w83793: Add documentation and maintainer hwmon: New Winbond W83793 hardware monitoring driver hwmon: Update Rudolf Marek's e-mail address hwmon/f71805f: Fix the device address decoding hwmon/f71805f: Always create all fan inputs hwmon/f71805f: Add support for the Fintek F71872F/FG chip hwmon: New PC87427 hardware monitoring driver hwmon/it87: Remove the SMBus interface support hwmon/hdaps: Update the list of supported devices hwmon/hdaps: Move the DMI detection data to .data hwmon/pc87360: Autodetect the VRM version hwmon/f71805f: Document the fan control features hwmon/f71805f: Add support for "speed mode" fan speed control hwmon/f71805f: Support DC fan speed control mode hwmon/f71805f: Let the user adjust the PWM base frequency hwmon/f71805f: Add manual fan speed control hwmon/f71805f: Store the fan control registers
| * | hwmon: New AMS hardware monitoring driverStelian Pop2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: New Winbond W83793 hardware monitoring driverRudolf Marek2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Update Rudolf Marek's e-mail addressJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Fix the device address decodingJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Always create all fan inputsJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Add support for the Fintek F71872F/FG chipJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: New PC87427 hardware monitoring driverJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-26 05:54:50 -0500