aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
...
* USB: cdc-wdm: fix race leading leading to memory corruptionOliver Neukum2012-05-07
| | | | | | | | | | | | | | commit 5c22837adca7c30b66121cf18ad3e160134268d4 upstream. This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: Fix build error due to dma_mask is not at pdev_archdata at ARM"Greg Kroah-Hartman2012-05-07
| | | | | | | | | | | | This reverts commit d39514c14bd941232976b68e2750dc725b90e724 which is e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream as it causes oopses on some ppc systems. Reported-by: Chen Peter-B29397 <B29397@freescale.com> Cc: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: fix criterion for resuming the root hubAlan Stern2012-05-07
| | | | | | | | | | | | | | | | | | | | | | | | | | commit dc75ce9d929aabeb0843a6b1a4ab320e58ba1597 upstream. This patch (as1542) changes the criterion ehci-hcd uses to tell when it needs to resume the controller's root hub. A resume is needed when a port status change is detected, obviously, but only if the root hub is currently suspended. Right now the driver tests whether the root hub is running, and that is not the correct test. In particular, if the controller has died then the root hub should not be restarted. In addition, some buggy hardware occasionally requires the root hub to be running and sending out SOF packets even while it is nominally supposed to be suspended. In the end, the test needs to be changed. Rather than checking whether the root hub is currently running, the driver will now check whether the root hub is currently suspended. This will yield the correct behavior in all cases. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Peter Chen <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
* usb: musb: omap: fix the error check for pm_runtime_get_syncShubhrajyoti D2012-04-27
| | | | | | | | | | | | | | | | commit ad579699c4f0274bf522a9252ff9b20c72197e48 upstream. pm_runtime_get_sync returns a signed integer. In case of errors it returns a negative value. This patch fixes the error check by making it signed instead of unsigned thus preventing register access if get_sync_fails. Also passes the error cause to the debug message. Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: omap: fix crash when musb glue (omap) gets initializedKishon Vijay Abraham I2012-04-27
| | | | | | | | | | | | | | commit 3006dc8c627d738693e910c159630e4368c9e86c upstream. pm_runtime_enable is being called after omap2430_musb_init. Hence pm_runtime_get_sync in omap2430_musb_init does not have any effect (does not enable clocks) resulting in a crash during register access. It is fixed here. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: eliminate NULL pointer dereference (bugfix)Andrzej Pietrasiewicz2012-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 92b0abf80c5c5f0e0d71d1309688a330fd74731b upstream. usb: gadget: eliminate NULL pointer dereference (bugfix) This patch fixes a bug which causes NULL pointer dereference in ffs_ep0_ioctl. The bug happens when the FunctionFS is not bound (either has not been bound yet or has been bound and then unbound) and can be reproduced with running the following commands: $ insmod g_ffs.ko $ mount -t functionfs func /dev/usbgadget $ ./null where null.c is: #include <fcntl.h> #include <linux/usb/functionfs.h> int main(void) { int fd = open("/dev/usbgadget/ep0", O_RDWR); ioctl(fd, FUNCTIONFS_CLEAR_HALT); return 0; } Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: fix deadlock in bConfigurationValue attribute methodAlan Stern2012-04-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 8963c487a80b4688c9e68dcc504a90074aacc145 upstream. This patch (as154) fixes a self-deadlock that occurs when userspace writes to the bConfigurationValue sysfs attribute for a hub with children. The task tries to lock the bandwidth_mutex at a time when it already owns the lock: The attribute's method calls usb_set_configuration(), which calls usb_disable_device() with the bandwidth_mutex held. usb_disable_device() unregisters the existing interfaces, which causes the hub driver to be unbound. The hub_disconnect() routine calls hub_quiesce(), which calls usb_disconnect() for each of the hub's children. usb_disconnect() attempts to acquire the bandwidth_mutex around a call to usb_disable_device(). The solution is to make usb_disable_device() acquire the mutex for itself instead of requiring the caller to hold it. Then the mutex can cover only the bandwidth deallocation operation and not the region where the interfaces are unregistered. This has the potential to change system behavior slightly when a config change races with another config or altsetting change. Some of the bandwidth released from the old config might get claimed by the other config or altsetting, make it impossible to restore the old config in case of a failure. But since we don't try to recover from config-change failures anyway, this doesn't matter. [This should be marked for stable kernels that contain the commit fccf4e86200b8f5edd9a65da26f150e32ba79808 "USB: Free bandwidth when usb_disable_device is called." That commit was marked for stable kernels as old as 2.6.32.] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: always clear the STS_FLR status bitAlan Stern2012-04-27
| | | | | | | | | | | | | | | | | | commit 2fbe2bf1fd37f9d99950bd8d8093623cf22cf08b upstream. This patch (as1544) fixes a problem affecting some EHCI controllers. They can generate interrupts whenever the STS_FLR status bit is turned on, even though that bit is masked out in the Interrupt Enable register. Since the driver doesn't use STS_FLR anyway, the patch changes the interrupt routine to clear that bit whenever it is set, rather than leaving it alone. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: sierra: avoid QMI/wwan interface on MC77xxBjørn Mork2012-04-27
| | | | | | | | | | | | | | | | | commit 749541d19e70905e3971f2a08335a206a98e4d0c upstream. These devices have a number of non serial interfaces as well. Use the existing "Direct IP" blacklist to prevent binding to interfaces which are handled by other drivers. We also extend the "Direct IP" blacklist with with interfaces only seen in "QMI" mode, assuming that these devices use the same interface numbers for serial interfaces both in "Direct IP" and in "QMI" mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: cp210x: Fixed usb_control_msg timeout valuesYuri Matylitski2012-04-27
| | | | | | | | | | | | | commit 2d5733fcd33dd451022d197cb6b476e970519ca7 upstream. Fixed too small hardcoded timeout values for usb_control_msg in driver for SiliconLabs cp210x-based usb-to-serial adapters. Replaced with USB_CTRL_GET_TIMEOUT/USB_CTRL_SET_TIMEOUT. Signed-off-by: Yuri Matylitski <ym@tekinsoft.com> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: yurex: Fix missing URB_NO_TRANSFER_DMA_MAP flag in urbTomoki Sekiyama2012-04-27
| | | | | | | | | | | | commit 532f17b5d59bf0deb6f1ff9bc1fb27d5b5011c09 upstream. Current probing code is setting URB_NO_TRANSFER_DMA_MAP flag into a wrong urb structure, and this causes BUG_ON with some USB host implementations. This patch fixes the issue. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: yurex: Remove allocation of coherent buffer for setup-packet bufferTomoki Sekiyama2012-04-27
| | | | | | | | | | | | commit 523fc5c14f6cad283e5a266eba0e343aed6e73d5 upstream. Removes allocation of coherent buffer for the control-request setup-packet buffer from the yurex driver. Using coherent buffers for setup-packet is obsolete and does not work with some USB host implementations. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOHTomoya MORINAGA2012-04-22
| | | | | | | | | | | | commit 731ad81e2dd97e3f222361f7b3ff4b35639e46af upstream. ML7831 is companion chip for Intel Atom E6xx series. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com> Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: pch_udc: Reduce redundant interruptTomoya MORINAGA2012-04-22
| | | | | | | | | | | | | | | | | | | | commit 833310402c54ad9b676b465fc53ad276b13d36be upstream. ISSUE: USB Suspend interrupts occur frequently. CAUSE: When it is called pch_udc_reconnect() in USB Suspend, it repeats reset and Suspend. SOLUTION: pch_udc_reconnect() does not enable all interrupts. When an enumeration event occurred the driver enables all interrupts. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: pch_udc: Fix usb/gadget/pch_udc: Fix ether gadget ↵Tomoya MORINAGA2012-04-22
| | | | | | | | | | | | | | | | | | | | | | connect/disconnect issue commit 1c575d2d2e3ff2a7cb3c2e2165064199cfd8ad32 upstream. ISSUE: After a USB cable is connect/disconnected, the system rarely freezes. CAUSE: Since the USB device controller cannot know to disconnect the USB cable, when it is used without detecting VBUS by GPIO, the UDC driver does not notify to USB Gadget. Since USB Gadget cannot know to disconnect, a false setting occurred when the USB cable is connected/disconnect repeatedly. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: pch_udc: Fix USB suspend issueTomoya MORINAGA2012-04-22
| | | | | | | | | | | | | | | | commit 84566abba058b2aae8d603dfa90b5a3778a6714f upstream. ISSUE: After USB Suspend, a system rarely freezes. CAUSE: When USB Suspend occurred, the driver is not notifying a gadget of the event. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: pch_udc: Fix wrong return valueTomoya MORINAGA2012-04-22
| | | | | | | | | | | | | | | | | | commit c802672cd36cd063bfd54d54c8c34825ab5b2357 upstream. ISSUE: If the return value of pch_udc_pcd_init() is False, the return value of this function is unsettled. Since pch_udc_pcd_init() always returns 0, there is not actually the issue. CAUSE: If pch_udc_pcd_init() is True, the variable, retval, is not set for an appropriate value. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: pch_udc: Fix disconnect issueTomoya MORINAGA2012-04-22
| | | | | | | | | | | | | | | | | commit c50a3bff0edb0acd49d8033a12ea4668e09a31ad upstream. ISSUE: When the driver notifies a gadget of a disconnect event, a system rarely freezes. CAUSE: When the driver calls dev->driver->disconnect(), it is not calling spin_unlock(). Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Fix register save/restore order.Sarah Sharp2012-04-22
| | | | | | | | | | | | | | | | | | | | | | commit c7713e736526d8c9f6f87716fb90562a8ffaff2c upstream. The xHCI 1.0 spec errata released on June 13, 2011, changes the ordering that the xHCI registers are saved and restored in. It moves the interrupt pending (IMAN) and interrupt control (IMOD) registers to be saved and restored last. I believe that's because the host controller may attempt to fetch the event ring table when interrupts are re-enabled. Therefore we need to restore the event ring registers before we re-enable interrupts. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation" Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xHCI: add XHCI_RESET_ON_RESUME quirk for VIA xHCI hostElric Fu2012-04-22
| | | | | | | | | | | | | | | | | | | | | | commit 457a4f61f9bfc3ae76e5b49f30f25d86bb696f67 upstream. The suspend operation of VIA xHCI host have some issues and hibernate operation works fine, so The XHCI_RESET_ON_RESUME quirk is added for it. This patch should base on "xHCI: Don't write zeroed pointer to xHC registers" that is released by Sarah. Otherwise, the host system error will ocurr in the hibernate operation process. This should be backported to stable kernels as old as 2.6.37, that contain the commit c877b3b2ad5cb9d4fe523c5496185cc328ff3ae9 "xhci: Add reset on resume quirk for asrock p67 host". Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xHCI: Correct the #define XHCI_LEGACY_DISABLE_SMIAlex He2012-04-22
| | | | | | | | | | | | | | | commit 95018a53f7653e791bba1f54c8d75d9cb700d1bd upstream. Re-define XHCI_LEGACY_DISABLE_SMI and used it in right way. All SMI enable bits will be cleared to zero and flag bits 29:31 are also cleared to zero. Other bits should be presvered as Table 146. This patch should be backported to kernels as old as 2.6.31. Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Restore event ring dequeue pointer on resume.Sarah Sharp2012-04-22
| | | | | | | | | | | | | | | | | | | commit fb3d85bc7193f23c9a564502df95564c49a32c91 upstream. The xhci_save_registers() function saved the event ring dequeue pointer in the s3 register structure, but xhci_restore_registers() never restored it. No other code in the xHCI successful resume path would ever restore it either. Fix that. This should be backported to kernels as old as 2.6.37, that contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI: PCI power management implementation". Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Cc: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Don't write zeroed pointers to xHC registers.Sarah Sharp2012-04-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 159e1fcc9a60fc7daba23ee8fcdb99799de3fe84 upstream. When xhci_mem_cleanup() is called, we can't be sure if the xHC is actually halted. We can ask the xHC to halt by writing to the RUN bit in the command register, but that might timeout due to a HW hang. If the host controller is still running, we should not write zeroed values to the event ring dequeue pointers or base tables, the DCBAA pointers, or the command ring pointers. Eric Fu reports his VIA VL800 host accesses the event ring pointers after a failed register restore on resume from suspend. The hypothesis is that the host never actually halted before the register write to change the event ring pointer to zero. Remove all writes of zeroed values to pointer registers in xhci_mem_cleanup(). Instead, make all callers of the function reset the host controller first, which will reset those registers to zero. xhci_mem_init() is the only caller that doesn't first halt and reset the host controller before calling xhci_mem_cleanup(). This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: don't re-enable IE constantlyFelipe Balbi2012-04-22
| | | | | | | | | | | | | | | | | | | | | commit 4e833c0b87a30798e67f06120cecebef6ee9644c upstream. While we're at that, define IMAN bitfield to aid readability. The interrupt enable bit should be set once on driver init, and we shouldn't need to continually re-enable it. Commit c21599a3 introduced a read of the irq_pending register, and that allows us to preserve the state of the IE bit. Before that commit, we were blindly writing 0x3 to the register. This patch should be backported to kernels as old as 2.6.36, or ones that contain the commit c21599a36165dbc78b380846b254017a548b9de5 "USB: xhci: Reduce reads and writes of interrupter registers". Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: don't clear urb->dev in scatter-gather libraryAlan Stern2012-04-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit bcf398537630bf20b4dbe59ba855b69f404c93cf upstream. This patch (as1517b) fixes an error in the USB scatter-gather library. The library code uses urb->dev to determine whether or nor an URB is currently active; the completion handler sets urb->dev to NULL. However the core unlinking routines need to use urb->dev. Since unlinking always racing with completion, the completion handler must not clear urb->dev -- it can lead to invalid memory accesses when a transfer has to be cancelled. This patch fixes the problem by getting rid of the lines that clear urb->dev after urb has been submitted. As a result we may end up trying to unlink an URB that failed in submission or that has already completed, so an extra check is added after each unlink to avoid printing an error message when this happens. The checks are updated in both sg_complete() and sg_cancel(), and the second is updated to match the first (currently it prints out unnecessary warning messages if a device is unplugged while a transfer is in progress). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Illia Zaitsev <I.Zaitsev@adbglobal.com> CC: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: sierra: add support for Sierra Wireless MC7710Anton Samokhvalov2012-04-22
| | | | | | | | | | commit c5d703dcc776cb542b41665f2b7e2ba054efb4a7 upstream. Just add new device id. 3G works fine, LTE not tested. Signed-off-by: Anton Samokhvalov <pg83@yandex.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id arraySantiago Garcia Mantinan2012-04-22
| | | | | | | | | | commit 9ac2feb22b5b821d81463bef92698ef7682a3145 upstream. Re-add NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED to option_id array Signed-off-by: Santiago Garcia Mantinan <manty@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: pl2303: fix DTR/RTS being raised on baud rate changeJohan Hovold2012-04-22
| | | | | | | | | | | | commit ce5c9851855bab190c9a142761d54ba583ab094c upstream. DTR/RTS should only be raised when changing baudrate from B0 and not on any baud rate change (> B0). Reported-by: Søren Holm <sgh@sgh.dk> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: fix race between probe and openJohan Hovold2012-04-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a65a6f14dc24a90bde3f5d0073ba2364476200bf upstream. Fix race between probe and open by making sure that the disconnected flag is not cleared until all ports have been registered. A call to tty_open while probe is running may get a reference to the serial structure in serial_install before its ports have been registered. This may lead to usb_serial_core calling driver open before port is fully initialised. With ftdi_sio this result in the following NULL-pointer dereference as the private data has not been initialised at open: [ 199.698286] IP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698297] *pde = 00000000 [ 199.698303] Oops: 0000 [#1] PREEMPT SMP [ 199.698313] Modules linked in: ftdi_sio usbserial [ 199.698323] [ 199.698327] Pid: 1146, comm: ftdi_open Not tainted 3.2.11 #70 Dell Inc. Vostro 1520/0T816J [ 199.698339] EIP: 0060:[<f811a089>] EFLAGS: 00010286 CPU: 0 [ 199.698344] EIP is at ftdi_open+0x59/0xe0 [ftdi_sio] [ 199.698348] EAX: 0000003e EBX: f5067000 ECX: 00000000 EDX: 80000600 [ 199.698352] ESI: f48d8800 EDI: 00000001 EBP: f515dd54 ESP: f515dcfc [ 199.698356] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 199.698361] Process ftdi_open (pid: 1146, ti=f515c000 task=f481e040 task.ti=f515c000) [ 199.698364] Stack: [ 199.698368] f811a9fe f811a9e0 f811b3ef 00000000 00000000 00001388 00000000 f4a86800 [ 199.698387] 00000002 00000000 f806e68e 00000000 f532765c f481e040 00000246 22222222 [ 199.698479] 22222222 22222222 22222222 f5067004 f5327600 f5327638 f515dd74 f806e6ab [ 199.698496] Call Trace: [ 199.698504] [<f806e68e>] ? serial_activate+0x2e/0x70 [usbserial] [ 199.698511] [<f806e6ab>] serial_activate+0x4b/0x70 [usbserial] [ 199.698521] [<c126380c>] tty_port_open+0x7c/0xd0 [ 199.698527] [<f806e660>] ? serial_set_termios+0xa0/0xa0 [usbserial] [ 199.698534] [<f806e76f>] serial_open+0x2f/0x70 [usbserial] [ 199.698540] [<c125d07c>] tty_open+0x20c/0x510 [ 199.698546] [<c10e9eb7>] chrdev_open+0xe7/0x230 [ 199.698553] [<c10e48f2>] __dentry_open+0x1f2/0x390 [ 199.698559] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698565] [<c10e4b76>] nameidata_to_filp+0x66/0x80 [ 199.698570] [<c10e9dd0>] ? cdev_put+0x20/0x20 [ 199.698576] [<c10f3e08>] do_last+0x198/0x730 [ 199.698581] [<c10f4440>] path_openat+0xa0/0x350 [ 199.698587] [<c10f47d5>] do_filp_open+0x35/0x80 [ 199.698593] [<c144bfec>] ? _raw_spin_unlock+0x2c/0x50 [ 199.698599] [<c10ff110>] ? alloc_fd+0xc0/0x100 [ 199.698605] [<c10f0b72>] ? getname_flags+0x72/0x120 [ 199.698611] [<c10e4450>] do_sys_open+0xf0/0x1c0 [ 199.698617] [<c11fcc08>] ? trace_hardirqs_on_thunk+0xc/0x10 [ 199.698623] [<c10e458e>] sys_open+0x2e/0x40 [ 199.698628] [<c144c990>] sysenter_do_call+0x12/0x36 [ 199.698632] Code: 85 89 00 00 00 8b 16 8b 4d c0 c1 e2 08 c7 44 24 14 88 13 00 00 81 ca 00 00 00 80 c7 44 24 10 00 00 00 00 c7 44 24 0c 00 00 00 00 <0f> b7 41 78 31 c9 89 44 24 08 c7 44 24 04 00 00 00 00 c7 04 24 [ 199.698884] EIP: [<f811a089>] ftdi_open+0x59/0xe0 [ftdi_sio] SS:ESP 0068:f515dcfc [ 199.698893] CR2: 0000000000000078 [ 199.698925] ---[ end trace 77c43ec023940cff ]--- Reported-and-tested-by: Ken Huang <csuhgw@gmail.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: mos7840: Fixed MCS7820 device attach problemDonald Lee2012-04-02
| | | | | | | | | | | | | | commit 093ea2d3a766cb8a4c4de57efec6c0a127a58792 upstream. A MCS7820 device supports two serial ports and a MCS7840 device supports four serial ports. Both devices use the same driver, but the attach function in driver was unable to correctly handle the port numbers for MCS7820 device. This problem has been fixed in this patch and this fix has been verified on x86 Linux kernel 3.2.9 with both MCS7820 and MCS7840 devices. Signed-off-by: Donald Lee <donald@asix.com.tw> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cp210x: Update to support CP2105 and multiple interface devicesPreston Fick2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | commit a5360a53a7ccad5ed9ccef210b94fef13c6e5529 upstream. This patch updates the cp210x driver to support CP210x multiple interface devices devices from Silicon Labs. The existing driver always sends control requests to interface 0, which is hardcoded in the usb_control_msg function calls. This only allows for single interface devices to be used, and causes a bug when using ports on an interface other than 0 in the multiple interface devices. Here are the changes included in this patch: - Updated the device list to contain the Silicon Labs factory default VID/PID for multiple interface CP210x devices - Created a cp210x_port_private struct created for each port on startup, this struct holds the interface number - Added a cp210x_release function to clean up the cp210x_port_private memory created on startup - Modified usb_get_config and usb_set_config to get a pointer to the cp210x_port_private struct, and use the interface number there in the usb_control_message wIndex param Signed-off-by: Preston Fick <preston.fick@silabs.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb-serial: Add support for the Sealevel SeaLINK+8 2038-ROHS deviceScott Dial2012-04-02
| | | | | | | | | | | commit 6d161b99f875269ad4ffa44375e1e54bca6fd02e upstream. This patch adds new device IDs to the ftdi_sio module to support the new Sealevel SeaLINK+8 2038-ROHS device. Signed-off-by: Scott Dial <scott.dial@scientiallc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: qcserial: don't grab QMI port on Gobi 1000 devicesDan Williams2012-04-02
| | | | | | | | | | | | | | | | commit c192c8e71a2ded01170c1a992cd21aaedc822756 upstream. Gobi 1000 devices have a different port layout, which wasn't respected by the current driver, and thus it grabbed the QMI/net port. In the near future we'll be attaching another driver to the QMI/net port for these devices (cdc-wdm and qmi_wwan) so make sure the qcserial driver doesn't claim them. This patch also prevents qcserial from binding to interfaces 0 and 1 on 1K devices because those interfaces do not respond. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: qcserial: add several new serial devicesThomas Tuttle2012-04-02
| | | | | | | | commit 2db4d87070e87d198ab630e66a898b45eff316d9 upstream. Signed-off-by: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Fix build error due to dma_mask is not at pdev_archdata at ARMPeter Chen2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit e90fc3cb087ce5c5f81e814358222cd6d197b5db upstream. When build i.mx platform with imx_v6_v7_defconfig, and after adding USB Gadget support, it has below build error: CC drivers/usb/host/fsl-mph-dr-of.o drivers/usb/host/fsl-mph-dr-of.c: In function 'fsl_usb2_device_register': drivers/usb/host/fsl-mph-dr-of.c:97: error: 'struct pdev_archdata' has no member named 'dma_mask' It has discussed at: http://www.spinics.net/lists/linux-usb/msg57302.html For PowerPC, there is dma_mask at struct pdev_archdata, but there is no dma_mask at struct pdev_archdata for ARM. The pdev_archdata is related to specific platform, it should NOT be accessed by cross platform drivers, like USB. The code for pdev_archdata should be useless, as for PowerPC, it has already gotten the value for pdev->dev.dma_mask at function arch_setup_pdev_archdata of arch/powerpc/kernel/setup-common.c. Tested-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: fsl_udc_core: Fix scheduling while atomic dump messagePeter Chen2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c5cc5ed86667d4ae74fe40ee4ed893f4b46aba05 upstream. When loading g_ether gadget, there is below message: Backtrace: [<80012248>] (dump_backtrace+0x0/0x10c) from [<803cb42c>] (dump_stack+0x18/0x1c) r7:00000000 r6:80512000 r5:8052bef8 r4:80513f30 [<803cb414>] (dump_stack+0x0/0x1c) from [<8000feb4>] (show_regs+0x44/0x50) [<8000fe70>] (show_regs+0x0/0x50) from [<8004c840>] (__schedule_bug+0x68/0x84) r5:8052bef8 r4:80513f30 [<8004c7d8>] (__schedule_bug+0x0/0x84) from [<803cd0e4>] (__schedule+0x4b0/0x528) r5:8052bef8 r4:809aad00 [<803ccc34>] (__schedule+0x0/0x528) from [<803cd214>] (_cond_resched+0x44/0x58) [<803cd1d0>] (_cond_resched+0x0/0x58) from [<800a9488>] (dma_pool_alloc+0x184/0x250) r5:9f9b4000 r4:9fb4fb80 [<800a9304>] (dma_pool_alloc+0x0/0x250) from [<802a8ad8>] (fsl_req_to_dtd+0xac/0x180) [<802a8a2c>] (fsl_req_to_dtd+0x0/0x180) from [<802a8ce4>] (fsl_ep_queue+0x138/0x274) [<802a8bac>] (fsl_ep_queue+0x0/0x274) from [<7f004328>] (composite_setup+0x2d4/0xfac [g_ether]) [<7f004054>] (composite_setup+0x0/0xfac [g_ether]) from [<802a9bb4>] (fsl_udc_irq+0x8dc/0xd38) [<802a92d8>] (fsl_udc_irq+0x0/0xd38) from [<800704f8>] (handle_irq_event_percpu+0x54/0x188) [<800704a4>] (handle_irq_event_percpu+0x0/0x188) from [<80070674>] (handle_irq_event+0x48/0x68) [<8007062c>] (handle_irq_event+0x0/0x68) from [<800738ec>] (handle_level_irq+0xb4/0x138) r5:80514f94 r4:80514f40 [<80073838>] (handle_level_irq+0x0/0x138) from [<8006ffa4>] (generic_handle_irq+0x38/0x44) r7:00000012 r6:80510b1c r5:80529860 r4:80512000 [<8006ff6c>] (generic_handle_irq+0x0/0x44) from [<8000f4c4>] (handle_IRQ+0x54/0xb4) [<8000f470>] (handle_IRQ+0x0/0xb4) from [<800085b8>] (tzic_handle_irq+0x64/0x94) r9:412fc085 r8:00000000 r7:80513f30 r6:00000001 r5:00000000 r4:00000000 [<80008554>] (tzic_handle_irq+0x0/0x94) from [<8000e680>] (__irq_svc+0x40/0x60) The reason of above dump message is calling dma_poll_alloc with can-schedule mem_flags at atomic context. To fix this problem, below changes are made: - fsl_req_to_dtd doesn't need to be protected by spin_lock_irqsave, as struct usb_request can be access at process context. Move lock to beginning of hardware visit (fsl_queue_td). - Change the memory flag which using to allocate dTD descriptor buffer, the memory flag can be from gadget layer. It is tested at i.mx51 bbg board with g_mass_storage, g_ether, g_serial. Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: Don't clear WDM_READ unless entire read buffer is emptiedBen Hutchings2012-04-02
| | | | | | | | | | | | commit b7a205545345578712611106b371538992e142ff upstream. The WDM_READ flag is cleared later iff desc->length is reduced to 0. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: Fix more races on the read pathBen Hutchings2012-04-02
| | | | | | | | | | | | | | | | | | | commit 711c68b3c0f7a924ffbee4aa962d8f62b85188ff upstream. We must not allow the input buffer length to change while we're shuffling the buffer contents. We also mustn't clear the WDM_READ flag after more data might have arrived. Therefore move both of these into the spinlocked region at the bottom of wdm_read(). When reading desc->length without holding the iuspin lock, use ACCESS_ONCE() to ensure the compiler doesn't re-read it with inconsistent results. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Bjørn Mork <bjorn@mork.no> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: fix console error reportingJohan Hovold2012-04-02
| | | | | | | | | | | | commit 548dd4b6da8a8e428453d55f7fa7b8a46498d147 upstream. Do not report errors in write path if port is used as a console as this may trigger the same error (and error report) resulting in a loop. Reported-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: gadget: Make g_hid device class conform to spec.Orjan Friberg2012-04-02
| | | | | | | | | | | | | commit 33d2832ab0149a26418d360af3c444969a63fb28 upstream. HID devices should specify this in their interface descriptors, not in the device descriptor. This fixes a "missing hardware id" bug under Windows 7 with a VIA VL800 (3.0) controller. Signed-off-by: Orjan Friberg <of@flatfrog.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadgetfs: return number of bytes on ep0 read requestThomas Faber2012-04-02
| | | | | | | | | | | | | | | commit 85b4b3c8c189e0159101f7628a71411af072ff69 upstream. A read from GadgetFS endpoint 0 during the data stage of a control request would always return 0 on success (as returned by wait_event_interruptible) despite having written data into the user buffer. This patch makes it correctly set the return value to the number of bytes read. Signed-off-by: Thomas Faber <thfabba@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: musb: Reselect index reg in interrupt contextSupriya Karanth2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 39287076e46d2c19aaceaa6f0a44168ae4d257ec upstream. musb INDEX register is getting modified/corrupted during temporary un-locking in a SMP system. Set this register with proper value after re-acquiring the lock Scenario: --------- CPU1 is handling a data transfer completion interrupt received for the CLASS1 EP CPU2 is handling a CLASS2 thread which is queuing data to musb for transfer Below is the error sequence: CPU1 | CPU2 -------------------------------------------------------------------- Data transfer completion inter- | rupt recieved. | | musb INDEX reg set to CLASS1 EP | | musb LOCK is acquired. | | | CLASS2 thread queues data. | | CLASS2 thread tries to acquire musb | LOCK but lock is already taken by | CLASS1, so CLASS2 thread is | spinning. | From Interrupt Context musb | giveback function is called | | The giveback function releases | CLASS2 thread now acquires LOCK LOCK | | ClASS1 Request's completion cal-| ClASS2 schedules the data transfer and lback is called | sets the MUSB INDEX to Class2 EP number | Interrupt handler for CLASS1 EP | tries to acquire LOCK and is | spinning | | Interrupt for Class1 EP acquires| Class2 completes the scheduling etc and the MUSB LOCK | releases the musb LOCK | Interrupt for Class1 EP schedul-| es the next data transfer | but musb INDEX register is still| set to CLASS2 EP | Since the MUSB INDEX register is set to a different endpoint, we read and modify the wrong registers. Hence data transfer will not happen properly. This results in unpredictable behavior So, the MUSB INDEX register is set to proper value again when interrupt re-acquires the lock Signed-off-by: Supriya Karanth <supriya.karanth@stericsson.com> Signed-off-by: Praveena Nadahally <praveen.nadahally@stericsson.com> Reviewed-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* powerpc/usb: fix bug of kernel hang when initializing usbShengzhou Liu2012-04-02
| | | | | | | | | | | | commit 28c56ea1431421dec51b7b229369e991481453df upstream. If USB UTMI PHY is not enable, writing to portsc register will lead to kernel hang during boot up. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: new PID: LUMEL PD12Michał Wróbel2012-04-02
| | | | | | | | commit 57e596f3af88ef52dea9640ed5e34ecd38893a02 upstream. Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: add support for FT-X series devicesJim Paris2012-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit dc0827c128c0ee5a58b822b99d662b59f4b8e970 upstream. Add PID 0x6015, corresponding to the new series of FT-X chips (FT220XD, FT201X, FT220X, FT221X, FT230X, FT231X, FT240X). They all appear as serial devices, and seem indistinguishable except for the default product string stored in their EEPROM. The baudrate generation matches FT232RL devices. Tested with a FT201X and FT230X at various baudrates (100 - 3000000). Sample dmesg: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver usb 2-1: new full-speed USB device number 6 using ohci_hcd usb 2-1: New USB device found, idVendor=0403, idProduct=6015 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: FT230X USB Half UART usb 2-1: Manufacturer: FTDI usb 2-1: SerialNumber: DC001WI6 ftdi_sio 2-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: ftdi_sio_port_probe drivers/usb/serial/ftdi_sio.c: ftdi_determine_type: bcdDevice = 0x1000, bNumInterfaces = 1 usb 2-1: Detected FT-X usb 2-1: Number of endpoints 2 usb 2-1: Endpoint 1 MaxPacketSize 64 usb 2-1: Endpoint 2 MaxPacketSize 64 usb 2-1: Setting MaxPacketSize 64 drivers/usb/serial/ftdi_sio.c: read_latency_timer drivers/usb/serial/ftdi_sio.c: write_latency_timer: setting latency timer = 1 drivers/usb/serial/ftdi_sio.c: create_sysfs_attrs drivers/usb/serial/ftdi_sio.c: sysfs attributes for FT-X usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0 Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: new PID: Distortec JTAG-lock-pickMichał Wróbel2012-04-02
| | | | | | | | commit 47594d5528f28a4c025c2955c68104c75815637c upstream. Signed-off-by: Michał Wróbel <michal.wrobel@flytronic.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Microchip VID mislabeled as Hornby VID in ftdi_sio.Bruno Thomsen2012-04-02
| | | | | | | | | | | | | | | | commit c1cee1d84001815a1b4321c49b995254c0df3100 upstream. Microchip VID (0x04d8) was mislabeled as Hornby VID according to USB-IDs. A Full Speed USB Demo Board PID (0x000a) was mislabeled as Hornby Elite (an Digital Command Controller Console for model railways). Most likely the Hornby based their design on PIC18F87J50 Full Speed USB Demo Board. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: add support for BeagleBone rev A5+Peter Korsgaard2012-04-02
| | | | | | | | | | | | commit 444aa7fa9bd752d19ce472d3e02558b987c3cc67 upstream. BeagleBone changed to the default FTDI 0403:6010 id in rev A5 to make life easier for Windows users, so we need a similar workaround as the Calao board to support it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ftdi_sio: fix problem when the manufacture is a NULL stringGreg Kroah-Hartman2012-04-02
| | | | | | | | | | | | | commit 656d2b3964a9d0f9864d472f8dfa2dd7dd42e6c0 upstream. On some misconfigured ftdi_sio devices, if the manufacturer string is NULL, the kernel will oops when the device is plugged in. This patch fixes the problem. Reported-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Tested-by: Wojciech M Zabolotny <W.Zabolotny@elka.pw.edu.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add ZTE MF820DBjørn Mork2012-04-02
| | | | | | | | | | | | | commit 5889d3d4209c1050b4a3c96c41faf6c0976a4acf upstream. This device presents a total of 5 interfaces with ff/ff/ff class/subclass/protocol. The last one of these is verified to be a QMI/wwan combined interface which should be handled by the qmi_wwan driver, so we blacklist it here. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-16 02:18:19 -0400