aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb
Commit message (Collapse)AuthorAge
* usb: add PRODUCT, TYPE to usb-interface eventsKay Sievers2007-08-22
| | | | | | | | | | | This fixes a regression for userspace programs that were relying on these events. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Andreas Jellinghaus <aj@ciphirelabs.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: resubmission unusual_devs modification for Nikon D80Mike Pagano2007-08-22
| | | | | | | | | | Upgrade the unusual_devs.h file to support the new 1.01 firmware for the Nikon D80. Signed-off-by: Mike Pagano <mpagano-kernel@mpagano.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb quirks: Add Canon EOS 5D (PC Connection mode) to the autosuspend blacklistPaul Walmsley2007-08-22
| | | | | | | | | | | | | | | | | | | Recent versions of the Linux kernel auto-suspend attached USB devices. After this happens to the Canon EOS 5D camera, the camera's interrupt endpoints don't seem to wake back up correctly, causing further use with libgphoto2 to fail with a -114 "OS error in camera communication" error. A similar fix is probably necessary for this camera in PTP mode, which identifies as USB product id 0x3102, but we haven't tested this. As part of our testing process, we tried the USB_QUIRK_RESET_RESUME quirk also, it's not helpful in this case. Signed-off-by: Raj Kumar <rkumar@archive.org> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: make EHCI initialize properly on PPC SOCsMike Nuss2007-08-22
| | | | | | | | | | | | | | | | | | | Correctly initialize the on-chip EHCI controller on the AMCC PPC440EPx. Fix "USB 0.0" initialization message, and properly put the controller into a known state before starting it. Add "FIXME" comment to the au1xxx bus glue which is doing the same wrong thing here. (Who maintains that, now that AMD sold off Alchemy?) Remove some false copyright attributions which were somehow placed in the au1xxx bus glue then copied into ppc-soc. Signed-off-by: Mike Nuss <mike@terascala.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: K.Boge <karsten.boge@amd.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Remove sysfs files on error caseStanislaw Gruszka2007-08-22
| | | | | | | | Bugfix, remove sysfs files when modem fails to boot. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fsl_usb2_udc: fix bug in processing setup requestsLi Yang2007-08-22
| | | | | | | | | | | | | | | Kim Liu found that in the original code certain class setup requests are wrongly recognized and processed as standard setup requests. For that reason gadget ether can't work in RNDIS mode with Windows host. The patch fixes the setup request processing code, and makes class requests correctly passed to gadget layer. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Liu <KLiu@vixs.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: g_file_storage: fix bug in DMA buffer handlingAlan Stern2007-08-22
| | | | | | | | | | | This patch (as963) fixes a recently-introduced bug. The gadget conversion removing DMA-mapped buffer allocation did not remove quite enough code from the g_file_storage driver; DMA pointers were being set to 0. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: update last_busy field correctlyAlan Stern2007-08-22
| | | | | | | | | | | | | This patch (as966) fixes a bug in the autosuspend code. The last_busy field should be updated whenever any event occurs, not just events that cause an autosuspend or an autoresume. This partially fixes Bugzilla #8892. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: allow retry on descriptor fetch errorsAlan Stern2007-08-22
| | | | | | | | | | | This patch (as964) was suggested by Steffen Koepf. It makes usb_get_descriptor() retry on all errors other than ETIMEDOUT, instead of only on EPIPE. This helps with some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unkill cxacru atm driverOliver Neukum2007-08-22
| | | | | | | | | | | it seems like you overdid it a bit in your quest to clean up the use of urb->status. In this driver you read it the first thing, which means that you are in a race against URB completion you'll usually lose, returning -EINPROGRESS. This kills the driver. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Adding support for HTC Smartphones to ipaqChristian Heim2007-08-22
| | | | | | | | | | This patch enables support for HTC Smartphones. The original patch is at https://bugs.gentoo.org/show_bug.cgi?id=187522. Original author is Mike Doty <kingtaco@gentoo.org>. Signed-off-by: Christian Heim <phreak@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: another quirky deviceOliver Neukum2007-08-22
| | | | | | | | for the drive Jean reported. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: quirky mass storage deviceOliver Neukum2007-08-22
| | | | | | | | this device has been reported to break with autosuspend. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci, fix oddball gcc warningDavid Brownell2007-08-22
| | | | | | | | | Some versions of GCC recently grew annoying warnings about constants. This gets rid of that warning from the OHCI driver. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: fix bugs in the disconnect pathwayAlan Stern2007-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | This patch (as961) fixes a couple of bugs in the disconnect pathway of usb-storage. The first problem, which apparently has been around for a while although nobody noticed it, shows up when an aborted command is still pending when a disconnect occurs. The SCSI error-handler will continue to wait in command_abort() until the us->notify completion is signalled. Thus quiesce_and_remove_host() needs to signal it. The second problem was introduced recently along with autosuspend support. Since usb_stor_scan_thread() now calls usb_autopm_put_interface() before exiting, we can't simply leave the scanning thread running after a disconnect; we must wait until the thread exits. This is solved by adding a new struct completion to the private data structure. Fortuitously, it allows the removal of the rather clunky mechanism used in the past to insure that all threads have finished before the module is unloaded. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: typo in usb R8A66597 HCD configM4rkusXXL2007-08-22
| | | | | | Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: accept 1-byte Device Status replies, fixing some b0rken devicesAlan Stern2007-08-22
| | | | | | | | | | | | | | | | | | Some devices have a bug which causes them to send a 1-byte reply to Get-Device-Status requests instead of 2 bytes as required by the spec. This doesn't play well with autosuspend, since we look for a valid status reply to make sure the device is still present when it resumes. Without both bytes, we assume the device has been disconnected. Lack of the second byte shouldn't matter much, since the spec requires it always to be equal to 0. Hence this patch (as959) causes finish_port_resume() to accept a 1-byte reply as valid. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: blacklist Samsung ML-2010 printerOliver Neukum2007-08-22
| | | | | | | | | | | Hi, this printer does not survive suspension. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: fix oti6858.c segfault in termios handlingThomas Viehmann2007-08-22
| | | | | | | | | | | | The oti6858 usb serial driver should use kernel_termios_to_user_termios/ user_termios_to_kernel_termios to avoid segfaults because the kernel uses a structure differing from that of user space with a different size. Signed-off-by: Thomas Viehmann <tv@beamnet.de> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove DEBUG definition from dummy_hcdAlan Stern2007-08-22
| | | | | | | | | This patch (as958) removes an unneeded and unwanted #define line from dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: belkin_sa: avoid divide by zero errorAndy Green2007-08-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The belkin_sa module has a problem coping with a 0 return from tty_get_baud_rate() -- the subsequent BELKIN_SA_BAUD macro drivers/usb/serial/belkin_sa.h:#define BELKIN_SA_BAUD(b) (230400/b) performs a divide with it leading to the following divide error: usb 3-1: Belkin / Peracom / GoHubs USB Serial Adapter converter now attached to ttyUSB0 PM: Adding info for No Bus:usbdev3.3_ep81 PM: Adding info for No Bus:usbdev3.3_ep01 PM: Adding info for No Bus:usbdev3.3_ep82 divide error: 0000 [#1] SMP Modules linked in: vfat fat iwl3945 mac80211 cfg80211 belkin_sa usbserial usb_storage autofs4 vmnet(P) vmmon(P) aes nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables cpufreq_ondemand acpi_cpufreq video output sbs button dock battery ac arc4 snd_hda_intel ecb blkcipher snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss sr_mod snd_mixer_oss rtc_cmos cdrom iTCO_wdt iTCO_vendor_support snd_pcm rtc_core snd_timer serio_raw b44 ssb rtc_lib parport ata_piix snd soundcore snd_page_alloc mii ata_generic sg ahci libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd CPU: 1 EIP: 0060:[<f8dd1747>] Tainted: P VLI EFLAGS: 00010246 (2.6.23-rc1 #1) EIP is at belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] eax: 00038400 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00038400 edi: 00001cb2 ebp: de49adb0 esp: de49ad6c ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process minicom (pid: 7306, ti=de49a000 task=eed6c3b0 task.ti=de49a000) Stack: d85c74f0 00000046 00000002 00000001 d85c74f0 d85c74f0 00000246 c887c658 00000001 00000cb0 00000001 00000084 00000000 d01b58c0 f6ba10e0 de49ade8 de49ae40 de49add0 f8e2526b d85c74b8 ca6e6dbc de49ae40 d85c746c eded72e8 Call Trace: [<c0405f35>] show_trace_log_lvl+0x1a/0x2f [<c0405fe5>] show_stack_log_lvl+0x9b/0xa3 [<c04061a5>] show_registers+0x1b8/0x289 [<c0406389>] die+0x113/0x246 [<c0622f98>] do_trap+0x8a/0xa3 [<c04068dc>] do_divide_error+0x85/0x8f [<c0622d6a>] error_code+0x72/0x78 [<f8e2526b>] serial_set_termios+0x86/0x8d [usbserial] [<c0542d33>] set_termios+0x309/0x34c [<c0542ece>] n_tty_ioctl+0x158/0x4ba [<c054030b>] tty_ioctl+0xc78/0xcd6 [<c048aea0>] do_ioctl+0x50/0x67 [<c048b100>] vfs_ioctl+0x249/0x25c [<c048b15c>] sys_ioctl+0x49/0x61 [<c0404ed2>] sysenter_past_esp+0x5f/0x99 ======================= Code: 85 c0 79 14 c7 44 24 04 67 1c dd f8 c7 04 24 d4 1e dd f8 e8 96 99 65 c7 8b 46 04 be 00 84 03 00 e8 47 11 77 c7 31 d2 89 c1 89 f0 <f7> f1 66 85 c0 89 c1 b8 01 00 00 00 0f 44 c8 8b 45 d8 85 db 8b EIP: [<f8dd1747>] belkin_sa_set_termios+0x18e/0x5b9 [belkin_sa] SS:ESP 0068:de49ad6c The small patch below should take care of this situation. Note that my kernel was tainted (vmware) but the problem will occur if tty_get_baud_rate() ever returns zero and should be taken care of. Signed-off-by: Andy Green <andy@warmcat.com> Cc: William Greathouse <wgreathouse@smva.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Support for the Evolution Scorpion robotsSøren Hauberg2007-08-22
| | | | | | | | | | | | | | | | | | The attached (mostly trivial) patches adds support for the Evolution Scorpion Robots. Evolution Robotics supplies a patch against 2.6.8 with their software. My patch is based on their work, so I don't know if I can sign it off, or if you need some Evolution people to do this (which might be hard). The patch adds device ID's for some robots which is trivial. From: Søren Hauberg <hauberg@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Søren
* USB: quirks: multicard reader doesn't like autosuspendDavid Brownell2007-08-22
| | | | | | | | | | It appears that one reason the "iConnect"-labeled multi-card reader was on sale for only $5 is that it doesn't handle suspend/resume correctly. Other than that, it was a good deal for a highspeed MMC/SD bridge. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: r8a66597-hcd: fix up error path.Paul Mundt2007-08-22
| | | | | | | | | | | | | | | | | | | Currently when registration fails we're left with a stray reference to release_mem_region(), this leads to the following case: r8a66597_hcd r8a66597_hcd: irq 13, io base 0x18040000 drivers/usb/host/r8a66597-hcd.c: register access fail. r8a66597_hcd r8a66597_hcd: startup error -6 r8a66597_hcd r8a66597_hcd: USB bus 1 deregistered drivers/usb/host/r8a66597-hcd.c: Failed to add hcd Trying to free nonexistent resource <0000000018040000-0000000018040000> This fixes it up. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: Enable hcd support on SH unconditionally.Paul Mundt2007-08-22
| | | | | | | | | | Previous boards were likely seeing USB_ARCH_HAS_HCD selected by way of PCMCIA or PCI, though none of those are required for hcd support on SH. Enable support unconditionally. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix support for Dell Wireless Broadband (aka WWAN)Faidon Liambotis2007-08-22
| | | | | | | | | | Dell Wireless Broadband ExpressCards are rebrands of Novatel's cards. Add all of their known PCI IDs to date along with their mapping to the exact Novatel model to the Option driver which already claims to support them. Signed-off-by: Faidon Liambotis <paravoid@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: u132-hcd.c - Fix a warning when CONFIG_PM=nGabriel C2007-08-22
| | | | | | | | | | | | | | I noticed this warning with CONFING_PM=n ... drivers/usb/host/u132-hcd.c:1525: warning: 'port_power' defined but not used ... Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Typo: "USB_SAFE_PADDED" -> "USB_SERIAL_SAFE_PADDED".Robert P. J. Day2007-08-22
| | | | | | | | Fix typo in safe_serial.c to match the actual CONFIG variable. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Stall control endpoint when file storage class request wValue != 0Luis Lloret2007-08-22
| | | | | | | | | | | | This patch makes the File Storage Gadget stall the control endpoint when a MSC class request is made with wValue != 0. This change makes some MSC compliance test warnings disappear. Signed-off-by: Luis Lloret <luislloret@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: garmin_gps: fixes package loss if used from gpsbabelHermann Kneissel2007-08-22
| | | | | | | | | | | | | | | | | | | | This patch contains two fixes submitted by Ondrej Palkovsky: - the 'ACK' packet is sent after the transfer of the USB packet is completed, i.e. in the write_callback function. Because the close function sends the 'abort' command, a parameter is added that allows the caller of garmin_write_bulk to specify, if the 'ack' should be propagated to the serial link or dimissed. This fixes the problem with gpsbabel, it has sent several packets that were acknowledged before they were sent to the GPS and GpsBabel closed the device - thus effectively cancelled all outstanding requests in the queue. - removed the APP_RESP_SEEN and APP_REQ_SEEN flags and changed them into counters. It evades USB reset of the gps on every device close. Signed-off-by: Hermann Kneissel <hermann.kneissel@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: visor add ACER S10 palm device idMaximilian Attems2007-08-22
| | | | | | | | | | | modprobe visor vendor=0x502 product=0x1 is said to work, plus there are patch instructions for it. fixes http://bugs.debian.org/340547 see http://www.chinaitpower.com/A/2004-07-28/87909.html Signed-off-by: Maximilian Attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: fix sysfs attribute registration bugAlan Stern2007-08-22
| | | | | | | | | | | | | | | | This patch (as950) fixes a bug in the cdc-acm driver. It doesn't keep track of which interface (control or data) the sysfs attributes get registered for, and as a result, during disconnect it will sometimes attempt to remove the attributes from the wrong interface. The left-over attributes can cause a crash later on, particularly if the driver module has been unloaded. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: px2xx_udc bugfix, missing check for gpio_pullupDavid Brownell2007-08-22
| | | | | | | | | | | | | | | | git commit b2bbb20b37d734443d1c279d0033a64f6095db54 added direct support for PXA GPIO D+ pullup as alternative to the older udc_command ops method. This was done by introduction of the pxa2xx_udc_mach_info member "gpio_pullup" which, if initialized, is now used in (almost) all places where udc_command used to be called. This patch fixes two places where checks for availability of D+ pullup control still only honor udc_command. Signed-off-by: Uli Luckas <u.luckas@road.de> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: EHCI cpufreq fix"Linus Torvalds2007-08-21
| | | | | | | | | | | | | This reverts commit 196705c9bbc03540429b0f7cf9ee35c2f928a534. It was reported to cause a regression by Daniel Exner, and Arjan van de Ven points out that we actually already have infrastructure in place for setting limits on acceptable DMA latency that would be the much more correct fix for the problem with some Broadcom EHCI controllers. Fixed up trivial conflicts due to the changes to support big-endian host controller descriptors in drivers/usb/host/{ehci-sched.c,ehci.h}. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add some help texts to recently-introduced kconfig itemsJan Engelhardt2007-08-18
| | | | | | Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: "sparse" cleanups for usb gadgetsDavid Brownell2007-07-30
| | | | | | | | | | This removes complaints about the gadget stack which are generated by the currrent "sparse": it doesn't like the fact that zero is the null pointer. (Last I checked, C guarantees that's correct ...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: Fix edgeport regression on non-EPiC devicesAdam Kropelin2007-07-30
| | | | | | | | | | | | | | Fix serious regression on non-EPiC edgeport usb-serial devices. Baud rate and MCR/LCR registers are not being written on these models due to apparent copy-n-paste errors introduced with EPiC support. Failure reported by Nick Pasich <Nick@NickAndBarb.net>. Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: more pxa2xx_udc dead code removalDavid Brownell2007-07-30
| | | | | | | | | | | | Remove some more dead code from the pxa2xx_udc driver: support for a no-longer-undocumented hardware "test mode". Newer chips made this the default, evidently as the best workaround for deep silicon bugs. The interest was that this seemed to be the only way to kick in the (documented!) double buffering capability. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: NIKON D50 is an unusual deviceMilinevsky Dmitry2007-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This short patch allows NIKON D50 to be mounted as UMS[unusual device] on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST 2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel GNU/Linux, some previous kernels... lsusb -v Bus 001 Device 006: ID 04b0:0409 Nikon Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04b0 Nikon Corp. idProduct 0x0409 bcdDevice 1.00 iManufacturer 1 NIKON iProduct 2 NIKON DSC D50 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: <caglar@pardus.org.tr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: drivers/usb/serial/sierra.c: make 3 functions staticAdrian Bunk2007-07-30
| | | | | | | | | This patch makes three needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Kevin Lloyd <linux@sierrawireless.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix BUG: sleeping function called from invalid context at ↵Oliver Neukum2007-07-30
| | | | | | | | | | | | /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0 Clearly there's a bug in drivers/usb/serial/usb-serial.c:usb_serial_put(). It shouldn't call kref_put() while holding a spinlock. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: mct_u232: Convert to proper speed handling APIAlan Cox2007-07-30
| | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* digi_acceleport: Drag the driver kicking and screaming into coding styleAlan Cox2007-07-30
| | | | | | | | | | | - The outbreak of acute bracketitus has been cured - The belief that brackets should have spaces everywhere likewise - Various other coding style tweaks - Use baud rates not Bfoo in the speed setup switch Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* cp2101: Remove broken termios optimisation, use proper speed APIAlan Cox2007-07-30
| | | | | | | | | I've also enabled the commented out support for 7200, 14400, 55854, 127117 and 3686400 baud as you can now set such rates in the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Fix a bug in usb_start_wait_urbAlan Stern2007-07-30
| | | | | | | | | | | This patch (as941) fixes a bug recently added to the USB synchronous API. The status of a completed URB must be preserved separately across a completion callback. Also, the actual_length value isn't available until after the URB has fully completed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix scatterlist PIO case (IOMMU)David Brownell2007-07-30
| | | | | | | | | | | | | | | Update the scatterlist logic so that PIO options are also disabled when an IOMMU may have coalesced pages during dma_map_sg() ... it's not just HIGHMEM that can make trouble supporting both PIO and DMA based host controller drivers. There also seems to be a cross-arch issue here, with 64bit powerpc not using an IOMMU define ... and its IOMMU_VMERGE config can always be overridden on the kernel command line. So this is better, but still imperfect. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix usb_serial_suspend(): buggy codeOliver Neukum2007-07-30
| | | | | | | | | | | | | | | | | | | | Am Montag 23 Juli 2007 schrieb Adrian Bunk: > Commit ec22559e0b7a05283a3413bda5d177e42c950e23 added the following > function to drivers/usb/serial/usb-serial.c: > [..] > > The Coverity checker spotted the inconsequent NULL checking for "serial". > > Looking at the code it also doesn't seem to have been intended to always > return 0. Coverity is right. The check for NULL is wrongly done and the error return is lost. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: yet another quirky deviceOliver Neukum2007-07-30
| | | | | | | | another quirky scanner. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add CanonScan LiDE30 to the quirk listJohann Felix Soden2007-07-30
| | | | | | | | | This patch adds CanoScan N1240U/LiDE30 (Scanner) to the list of quirky USB devices. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: even more quirksOliver Neukum2007-07-30
| | | | | | | | The number of quirky devices seems to be large. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-22 09:07:26 -0500