aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host
Commit message (Collapse)AuthorAge
...
| | * | xhci 1.0: Only interrupt on short packet for IN EPs.Sarah Sharp2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It doesn't make sense to set the interrupt on short packet (TRB_ISP) flag for TRBs queued to endpoints that only receive packets from the host controller (i.e. OUT endpoints). Packets can only be short when they are sent from a USB device. Plus, the xHCI 1.0 specification forbids setting the flag for anything but IN endpoints. While we're at it, remove some of my snide remarks about the inefficiency of event data TRBs. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Remove sparse warning about cmd_status.Sarah Sharp2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sparse complains about the arguments to xhci_evaluate_context_result() and xhci_configure_endpoint_result(): CHECK drivers/usb/host/xhci.c drivers/usb/host/xhci.c:1647:53: warning: incorrect type in argument 3 (different signedness) drivers/usb/host/xhci.c:1647:53: expected int *cmd_status drivers/usb/host/xhci.c:1647:53: got unsigned int [usertype] *[assigned] cmd_status drivers/usb/host/xhci.c:1648:50: warning: incorrect type in argument 3 (different signedness) drivers/usb/host/xhci.c:1648:50: expected int *cmd_status drivers/usb/host/xhci.c:1648:50: got unsigned int [usertype] *[assigned] cmd_status The command status is taken from the command completion event TRB, and will always be a positive number. Change the signature of xhci_evaluate_context_result() and xhci_configure_endpoint_result() to take a u32 for cmd_status. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | usbcore: Refine USB3.0 device suspend and resumeAndiry Xu2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the past, we use USB2.0 request to suspend and resume a USB3.0 device. Actually, USB3.0 hub does not support Set/Clear PORT_SUSPEND request, instead, it uses Set PORT_LINK_STATE request. This patch makes USB3.0 device suspend/resume comply with USB3.0 specification. This patch fixes the issue that USB3.0 device can not be suspended when connected to a USB3.0 external hub. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI: report USB3.0 portstatus comply with USB3.0 specificationAndiry Xu2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB3.0 specification has different wPortStatus and wPortChange definitions from USB2.0 specification. Since USB3 root hub and USB2 root hub are split now and USB3 hub only has USB3 protocol ports, we should modify the portstatus and portchange report of USB3 ports to comply with USB3.0 specification. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI: Set link state supportAndiry Xu2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Set Port Feature(PORT_LINK_STATE) request. The most significant byte (bits 15..8) of the wIndex field specifies the U state the host software wants to put the link connected to the port into. This request is only valid when the PORT_ENABLE bit is set and the PORT_LINK_STATE should not be above value '5' (Rx.Detect). This request will be later used to replace the set/clear suspend USB3 protocol ports in hub driver. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI: Clear link state change supportAndiry Xu2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Clear Port Feature(C_PORT_LINK_STATE) request from usbcore. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xHCI: warm reset supportAndiry Xu2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds warm reset support to xhci hub control. It handles Set Port Feature(BH_PORT_RESET) and Clear Port Feature (C_BH_PORT_RESET) request from usbcore. Note warm reset is called BH reset some places in USB3.0 specification. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | usb/ch9: use proper endianess for wBytesPerIntervalSebastian Andrzej Siewior2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | while going through Tatyana's changes for the gadget framework I noticed that this type is not defined as __le16. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Remove recursive call to xhci_handle_eventMatt Evans2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the caller loop while there are events to handle, instead. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Add an assertion to check for virt_dev=0 bug.Matt Evans2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a "plug-unplug" stress test on an NEC xHCI card, a null pointer dereference was observed. xhci_address_device() dereferenced a null virt_dev (possibly an erroneous udev->slot_id?); this patch adds a WARN_ON & message to aid debug if it can be recreated. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Add rmb() between reading event validity & event data access.Matt Evans2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On weakly-ordered systems, the reading of an event's content must occur after reading the event's validity. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * | xhci: Make xHCI driver endian-safeMatt Evans2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the struct members defining access to xHCI device-visible memory to use __le32/__le64 where appropriate, and then adds swaps where required. Checked with sparse that all accesses are correct. MMIO accesses use readl/writel so already are performed LE, but prototypes now reflect this with __le*. There were a couple of (debug) instances of DMA pointers being truncated to 32bits which have been fixed too. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * | | usb/isp1760: Improve urb queueing, get rid of BUG():s in normal code pathsArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the code that handles qtds. Intead of directly allocating chip mem and chip slot, enqueue the transfer in a list of queue heads. Use a centralized function enqueue_qtds() to prioritize and enqueue transfers. This removes all of the interrupt context BUG() calls when out of chip mem or transfer slots. It also makes it possible to efficiently use the dual-port mem on the chip for double-buffered transfers, which improve transfer times to/from/between usb sticks by about 40 % on my HW. With this patch it should also be possible to handle qtd scheduling outside of the interrupt handler, for significantly improved kernel latency. I have not implemented this since there are some locking issues which I haven't had time to look at. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/isp1760: Report correct urb status after unlinkArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug in my previous (2.6.38) patch series which caused urb->status value to be wrong after unlink (broke usbtest 11, 12). Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/isp1760: Remove unneeded OR map and HcBufferStatus codeArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we always set the OR flag for each transfer, we can just as well set all these bits to 1 at init and be done with it. Also, HcBufferStatus can be set at init as per the ISP1761 datasheet page 47 with no loss of performance. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/isp1760: Clean up urb enqueueingArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This collects urb enqueue code that was spread out all over the place into a couple of more readable functions. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | usb/isp1760: Remove false error printoutArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the "qh is 0" printout. qh == NULL if the urb has been unlinked, so this condition is normal. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: extend ehci-fsl and fsl_udc_core driver for OTG operationAnatolij Gustschin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | USB: ehci-fsl: add MPC5121E specific suspend and resumeAnatolij Gustschin2011-05-02
| |/ / | | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | xhci-hcd: Include <linux/slab.h> in xhci-pci.cBen Hutchings2011-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b02d0ed677acb3465e7600366f2353413bf24074 ('xhci: Change hcd_priv into a pointer') added calls to kzalloc() and kfree() in xhci-pci.c. On most architectures <linux/slab.h> is indirectly included, but on some it is not. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>, Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ehci: tegra: fix USB1 port reset issueJim Lin2011-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra USB1 port needs to issue Port Reset twice internally, otherwise it fails to enumerate devices attached to it Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Olof Johansson <olofj@chromium.org> [ squash two patches into one and minor style cleanups ] Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ohci-s3c2410: use resource_size()Jingoo Han2011-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses the resource_size help function instead of manually calculating the resource size. It can reduce the chance of introducing off-by-one errors. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: ohci-s3c2410: use __devinit and __devexit macros for probe and removeJingoo Han2011-04-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | The __devinit and __devexit macros were added to probe and remove functions. The macros move the probe and remove functions to the devinit and devexit sections. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | Merge 2.6.39-rc4 into usb-nextGreg Kroah-Hartman2011-04-19
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | This is needed to help resolve some xhci issues and other minor differences. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ohci: add bus glue for the Atheros AR71XX/AR7240 SoCsGabor Juhos2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Atheros AR71XX/AR7240 SoCs have a built-in OHCI controller. This patch adds the necessary glue code to make the generic OHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ehci: add workaround for Synopsys HC bugGabor Juhos2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A Synopsys USB core used in various SoCs has a bug which might cause that the host controller not issuing ping. When software uses the Doorbell mechanism to remove queue heads, the host controller still has references to the removed queue head even after indicating an Interrupt on Async Advance. This happens if the last executed queue head's Next Link queue head is removed. Consequences of the defect: The Host controller fetches the removed queue head, using memory that would otherwise be deallocated.This results in incorrect transactions on both the USB and system memory. This may result in undefined behavior. Workarounds: 1) If no queue head is active (no Status field's Active bit is set) after removing the queue heads, the software can write one of the valid queue head addresses to the ASYNCLISTADDR register and deallocate the removed queue head's memory after 2 microframes. If one or more of the queue heads is active (the Active bit is set in the Status field) after removing the queue heads, the software can delay memory deallocation after time X, where X is the time required for the Host Controller to go through all the queue heads once. X varies with the number of queue heads and the time required to process periodic transactions: if more periodic transactions must be performed, the Host Controller has less time to process asynchronous transaction processing. 2) Do not use the Doorbell mechanism to remove the queue heads. Disable the Asynchronous Schedule Enable bit instead. The bug has been discussed on the linux-usb-devel mailing-list four years ago, the original thread can be found here: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg45345.html This patch implements the first workaround as suggested by David Brownell. The built-in USB host controller of the Atheros AR7130/AR7141/AR7161 SoCs requires this to work properly. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: ehci: add bus glue for the Atheros AR71XX/AR724X/AR91XX SoCsGabor Juhos2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Atheros AR71XX/AR91XX SoCs have a built-in EHCI controller. This patch adds the necessary glue code to make the generic EHCI driver usable for them. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: Add initial S5P EHCI driverJoonyoung Shim2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds host USB high speed driver for samsung S5P series. This is initial driver and we need additional implementation to support some functions like power management. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: Mark ehci_adjust_port_wakeup_flags as __maybe_unusedFabio Estevam2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mark ehci_adjust_port_wakeup_flags as __maybe_unused to avoid the following warning when building the ehci-mxc driver: CC drivers/usb/host/ehci-hcd.o drivers/usb/host/ehci-hub.c:130: warning: 'ehci_adjust_port_wakeup_flags' defined but not used Current ehci-mxc driver implementation does not support suspend/resume. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | usb: u132-hcd: Drop __TIME__ usageMichal Marek2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: UHCI: don't try to revive a dead controllerAlan Stern2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1457) abandons the curious strategy of declaring a controller dead following hibernation merely in order to reset and then revive it. The core no longer allow dead controllers to spring back to life when the system resumes, so there's no reason to declare a working controller temporarily dead. Instead we do an explicit reset. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: UHCI: remove uses of hcd->stateAlan Stern2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1456) removes all uses of hcd->state from the uhci-hcd driver, as part of the overall strategy to eliminate hcd->state completely. Now when a controller dies we call usb_hc_died() directly, instead of relying on the core interrupt handler to see that hcd->state has changed to HC_STATE_HALT and make the call for us. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| | * | USB: sl811: add Kconfig option for ISOCHRONOUS modeMike Frysinger2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some bluetooth dongles want ISO mode, and the limited support that the sl811 offers today is sufficient. So add a Kconfig option for people to optionally get access to the partial functionality. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-05-23
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) b43: fix comment typo reqest -> request Haavard Skinnemoen has left Atmel cris: typo in mach-fs Makefile Kconfig: fix copy/paste-ism for dell-wmi-aio driver doc: timers-howto: fix a typo ("unsgined") perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course'). treewide: fix a few typos in comments regulator: change debug statement be consistent with the style of the rest Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations" audit: acquire creds selectively to reduce atomic op overhead rtlwifi: don't touch with treewide double semicolon removal treewide: cleanup continuations and remove logging message whitespace ath9k_hw: don't touch with treewide double semicolon removal include/linux/leds-regulator.h: fix syntax in example code tty: fix typo in descripton of tty_termios_encode_baud_rate xtensa: remove obsolete BKL kernel option from defconfig m68k: fix comment typo 'occcured' arch:Kconfig.locks Remove unused config option. treewide: remove extra semicolons ...
| * | | | treewide: fix a few typos in commentsJustin P. Mattock2011-05-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - kenrel -> kernel - whetehr -> whether - ttt -> tt - sss -> ss Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | | treewide: cleanup continuations and remove logging message whitespaceJoe Perches2011-04-26
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using C line continuation inside format strings is error prone. Clean up the unintended whitespace introduced by misuse of \. Neaten correctly used line continations as well for consistency. drivers/scsi/arcmsr/arcmsr_hba.c has these errors as well, but arcmsr needs a lot more work and the driver should likely be moved to staging instead. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | / sanitize <linux/prefetch.h> usageLinus Torvalds2011-05-20
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e66eed651fd1 ("list: remove prefetching from regular list iterators") removed the include of prefetch.h from list.h, which uncovered several cases that had apparently relied on that rather obscure header file dependency. So this fixes things up a bit, using grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]') grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]') to guide us in finding files that either need <linux/prefetch.h> inclusion, or have it despite not needing it. There are more of them around (mostly network drivers), but this gets many core ones. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | xHCI: Clear PLC in xhci_bus_resume()Andiry Xu2011-05-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended port, because if a port transition from U3 to U0 state, it will report a port link state change, and software should clear the corresponding PLC bit. It also uses hcd->speed to check if a port is a USB2 protocol port. The patch fixes the issue that USB keyboard can not wakeup system from hibernation. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | | usb/isp1760: Report correct urb status after unlinkArvid Brodin2011-05-02
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug in my previous (2.6.38) patch series which caused urb->status value to be wrong after unlink (broke usbtest 11, 12). Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | omap:usb: add regulator support for EHCIKeshava Munegowda2011-05-02
|/ / | | | | | | | | | | | | | | | | | | in case of ehci phy mode; regulator of phy should be enabled before initializing the usbhs core driver. Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Steve Calfee <stevecalfee@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | Revert "USB: isp1760-hcd: move imask clear after pending work is done"Greg Kroah-Hartman2011-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 5808544690300071f09eef9ab83a0fb1f60cf1cd. To quote Richard: I don't think this should be mainlined. It was a misunderstanding on my part. If you see all the other hdc drivers in the same location, they all do the same thing (i.e. clear the interrupt status first, then do the work) that "glitch" I think I saw was actually two back-to-back interrupts. Sebastian (the original author of isp1760) explained it to me a few days after my submission. sorry for the confusion Cc: Richard Retanubun <RichardRetanubun@ruggedcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | xHCI: Implement AMD PLL quirkAndiry Xu2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch disable the optional PM feature inside the Hudson3 platform under the following conditions: 1. If an isochronous device is connected to xHCI port and is active; 2. Optional PM feature that powers down the internal Bus PLL when the link is in low power state is enabled. The PM feature needs to be disabled to eliminate PLL startup delays when the link comes out of low power state. The performance of DMA data transfer could be impacted if system delay were encountered and in addition to the PLL start up delays. Disabling the PM would leave room for unpredictable system delays in order to guarantee uninterrupted data transfer to isochronous audio or video stream devices that require time sensitive information. If data in an audio/video stream was interrupted then erratic audio or video performance may be encountered. AMD PLL quirk is already implemented in OHCI/EHCI driver. After moving the quirk code to pci-quirks.c and export them, xHCI driver can call it directly without having the quirk implementation in itself. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | xhci: Tell USB core both roothubs lost power.Sarah Sharp2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a resume, when the power is lost during hibernate, the USB core will call hub_reset_resume for the xHCI USB 2.0 roothub, but not for the USB 3.0 roothub: [ 164.748310] usb usb1: root hub lost power or was reset [ 164.748353] usb usb2: root hub lost power or was reset [ 164.748487] usb usb3: root hub lost power or was reset [ 164.748488] xhci_hcd 0000:01:00.0: Stop HCD ... [ 164.870039] hub 4-0:1.0: hub_resume ... [ 164.870054] hub 3-0:1.0: hub_reset_resume This causes issues later, because the USB core assumes the USB 3.0 hub attached to the USB 3.0 roothub is still active. It attempts to queue a control URB for the external hub, which fails because all the device slot contexts were released when the USB 3.0 roothub lost power: [ 164.980044] hub 4-1:1.0: hub_resume [ 164.980047] xhci_hcd 0000:01:00.0: Get port status returned 0x10101 [ 164.980049] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980053] hub 3-0:1.0: port 1: status 0101 change 0001 [ 164.980056] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980060] xhci_hcd 0000:01:00.0: `MEM_WRITE_DWORD(3'b000, 32'hffffc90008948440, 32'h202e1, 4'hf); [ 164.980062] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980066] xhci_hcd 0000:01:00.0: clear port connect change, actual port 0 status = 0x2e1 [ 164.980069] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980072] xhci_hcd 0000:01:00.0: get port status, actual port 1 status = 0x2a0 [ 164.980074] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980077] xhci_hcd 0000:01:00.0: Get port status returned 0x100 [ 164.980079] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980082] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980085] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980088] hub 4-1:1.0: port 4: status 0000 change 0000 [ 164.980091] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980094] hub 4-1:1.0: activate --> -22 [ 164.980113] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980117] hub 4-1:1.0: hub_port_status failed (err = -22) [ 164.980119] xHCI xhci_urb_enqueue called with unaddressed device [ 164.980123] hub 4-1:1.0: can't resume port 4, status -22 [ 164.980126] hub 4-1:1.0: port 4 status ffff.ffff after resume, -22 [ 164.980129] usb 4-1.4: can't resume, status -22 [ 164.980131] hub 4-1:1.0: logical disconnect on port 4 This causes issues when a USB 3.0 hard drive is attached to the external USB 3.0 hub when the system is hibernated: [ 6249.849653] sd 8:0:0:0: [sdb] Unhandled error code [ 6249.849659] sd 8:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 6249.849663] sd 8:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 2a 08 00 00 02 00 [ 6249.849671] end_request: I/O error, dev sdb, sector 10760 Make sure to inform the USB core that *both* xHCI roothubs lost power. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: xhci - also free streams when resetting devicesDmitry Torokhov2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, when resetting a device, xHCI driver disables all but one endpoints and frees their rings, but leaves alone any streams that might have been allocated. Later, when users try to free allocated streams, we oops in xhci_setup_no_streams_ep_input_ctx() because ep->ring is NULL. Let's free not only rings but also stream data as well, so that calling free_streams() on a device that was reset will be safe. This should be queued for stable trees back to 2.6.35. Reviewed-by: Micah Elizabeth Scott <micah@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* | xhci: Fix NULL pointer deref in handle_port_status()Sarah Sharp2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | When we get a port status change event, we need to figure out what type of port it came from: a USB 3.0 port, or a USB 2.0/1.1 port. We can't know which usb_hcd to use until that point, so hcd will be NULL for part of the function. Unfortunately, if any of the sanity checks fail, we'll jump to the cleanup label before hcd is set to a valid pointer, and then we'll attempt to tell the USB core to kick the hcd, which is NULL. Skip kicking the roothub if the sanity checks fail. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: xhci - fix math in xhci_get_endpoint_interval()Dmitry Torokhov2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When parsing exponent-expressed intervals we subtract 1 from the value and then expect it to match with original + 1, which is highly unlikely, and we end with frequent spew: usb 3-4: ep 0x83 - rounding interval to 512 microframes Also, parsing interval for fullspeed isochronous endpoints was incorrect - according to USB spec they use exponent-based intervals (but xHCI spec claims frame-based intervals). I trust USB spec more, especially since USB core agrees with it. This should be queued for stable kernels back to 2.6.31. Reviewed-by: Micah Elizabeth Scott <micah@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* | USB: xhci: simplify logic of skipping missed isoc TDsDmitry Torokhov2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic of the handling Missed Service Error Events was pretty confusing as we were checking the same condition several times. In addition, it caused compiler warning since the compiler could not figure out that event_trb is actually unused in case we are skipping current TD. Fix that by rearranging "skip" condition checks, and factor out skip_isoc_td() so that it is called explicitly. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: xhci - remove excessive 'inline' markingsDmitry Torokhov2011-04-13
| | | | | | | | | | | | | | | | Remove 'inline' markings from file-local functions and let compiler do its job and inline what makes sense for given architecture. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: xhci: unsigned char never equals -1Dan Carpenter2011-04-13
| | | | | | | | | | | | | | | | | | | | | | | | There were some places that compared port_speed == -1 where port_speed is a u8. This doesn't work unless we cast the -1 to u8. Some places did it correctly. Instead of using -1 directly, I've created a DUPLICATE_ENTRY define which does the cast and is more descriptive as well. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | USB: xhci - fix unsafe macro definitionsDmitry Torokhov2011-04-13
| | | | | | | | | | | | | | | | | | | | | | Macro arguments used in expressions need to be enclosed in parenthesis to avoid unpleasant surprises. This should be queued for kernels back to 2.6.31 Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-17 19:50:16 -0400