aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mips/alchemy
Commit message (Collapse)AuthorAge
* MIPS: MTX-1: Request button GPIO before setting its directionFlorian Fainelli2009-08-03
| | | | | | | | | | | | | | | | | | | This patch fixes the following warning at boot time: WARNING: at drivers/gpio/gpiolib.c:83 0x8021d5e0() autorequest GPIO-207 Modules linked in: Call Trace:[<8011e0ec>] 0x8011e0ec [<80110a28>] 0x80110a28 [<80110a28>] 0x80110a28 [..snip..] The current code does not request the GPIO and attempts to set its direction, which is a violation of the GPIO API. This patch also unhardcode the GPIO we request and use the one we defined in the button driver. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: devboards: Convert to gpio calls.Manuel Lauss2009-06-17
| | | | | | | Replace a few open-coded GPIO register accesses with gpio calls. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: xxs1500: use linux gpio api.Manuel Lauss2009-06-17
| | | | | | | | Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: MTX-1: Use linux gpio api.Manuel Lauss2009-06-17
| | | | | | | | Replace a few GPIO register accesses in the board init code with calls to the gpio api. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Rewrite GPIO support.Manuel Lauss2009-06-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current in-kernel Alchemy GPIO support is far too inflexible for all my use cases. To address this, the following changes are made: * create generic functions which deal with manipulating the on-chip GPIO1/2 blocks. Such functions are universally useful. * Macros for GPIO2 shared interrupt management and block control. * support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros. If CONFIG_GPIOLIB is not enabled, provide linux gpio framework compatibility by directly inlining the GPIO1/2 functions. GPIO access is limited to on-chip ones and they can be accessed as documented in the datasheets (GPIO0-31 and 200-215). If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and one for GPIO2, are registered. GPIOs can still be accessed by using the numberspace established in the databooks. However this is not yet flexible enough for my uses: My Alchemy systems have a documented "external" gpio interface (fixed, different numberspace) and can support a variety of baseboards, some of which are equipped with I2C gpio expanders. I want to be able to provide the default 16 GPIOs of the CPU board numbered as 0..15 and also support gpio expanders, if present, starting as gpio16. To achieve this, a new Kconfig symbol for Alchemy is introduced, CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal that they don't want the Alchemy numberspace exposed to the outside world, but instead want to provide their own. Boards are now respon- sible for providing the linux gpio interface glue code (either in a custom gpio.h header (in board include directory) or with gpio_chips). To make the board-specific inlined gpio functions work, the MIPS Makefile must be changed so that the mach-au1x00/gpio.h header is included _after_ the board headers, by moving the inclusion of the mach-au1x00/ to the end of the header list. See arch/mips/include/asm/mach-au1x00/gpio.h for more info. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Timer build fixManuel Lauss2009-05-14
| | | | | | | Fix breakage introduced by 8e19608e8b5c001e4a66ce482edc474f05fb7355. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-07
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MIPS: Alchemy: PB1200: use SMC91X platform data.Manuel Lauss2009-03-30
| | | | | | | Add platform data for the smc91x on the PB1200/DB1200, and remove the now unused AU1X00 entry in smc91x.h. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
* MIPS: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all platformsRalf Baechle2009-03-30
| | | | | | __do_IRQ() is deprecated and will go away. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Au1000: convert to using gpiolibFlorian Fainelli2009-03-30
| | | | | | | This patch converts the GPIO board code to use gpiolib. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: In plat_time_init() t reaches -1, tested: 0Roel Kluin2009-02-27
| | | | | | | | | With a postfix decrement t reaches -1 rather than 0, so the fall-back will not occur. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: mano@roarinelk.homelinux.net Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: time.c build fixManuel Lauss2009-01-30
| | | | | | | In Linus' current -git the cpumask member is now a pointer. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: new userspace suspend interface for development boards.Manuel Lauss2009-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the current sysctl-based suspend interface with a new sysfs- based one which also uses the Linux-2.6 suspend model. To configure wakeup sources, a subtree for the demoboards is created under /sys/power/db1x: sys/ `-- power `-- db1x |-- gpio0 |-- gpio1 |-- gpio2 |-- gpio3 |-- gpio4 |-- gpio5 |-- gpio6 |-- gpio7 |-- timer |-- timer_timeout |-- wakemsk `-- wakesrc The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2 bits of the SYS_WAKEMSK (wakeup source enable) register. Writing '1' enables a wakesource, 0 disables it. The 'timer_timeout' node holds the timeout in seconds after which the TOYMATCH2 event should wake the system. The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex), the 'wakemsk' node can be used to get/set the wakeup mask directly. For example, to have the timer wake the system after 10 seconds of sleep, the following must be done in userspace: echo 10 > /sys/power/db1x/timer_timeout echo 1 > /sys/power/db1x/timer echo mem > /sys/power/sleep This patch also removes the homebrew CPU frequency switching code. I don't understand how it could have ever worked reliably; it does not communicate the clock changes to peripheral devices other than uarts. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/alchemy/devboards/pm.c
* MIPS: Alchemy: dbdma suspend/resume support.Manuel Lauss2009-01-11
| | | | | | | Implement suspend/resume for DBDMA controller and its channels. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Fix up PM code on Au1550/Au1200Manuel Lauss2009-01-11
| | | | | | | | | | | | Au1550/Au1200 have a different memory controller which requires additi- onal code to properly put memory to sleep (code taken from AMD/RMI's Linux-2.6.11 source package). Also fix up the remaining pm-related paths to compile on Au1200/Au1550 platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: move calc_clock function.Manuel Lauss2009-01-11
| | | | | | | | | | Now that nothing in time.c depends on calc_clock, it can be moved to clocks.c where it belongs. While at it, give it a better non-generic name and call it as soon as possible in plat_mem_init. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: RTC counter clocksource / clockevent support.Manuel Lauss2009-01-11
| | | | | | | | | | | | Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent device. As a nice side effect, this also enables use of the 'wait' instruction for runtime idle power savings. If the counters aren't enabled/working properly, fall back on the cp0 counter clock code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: remove cpu_table.Manuel Lauss2009-01-11
| | | | | | | | | | | | | | | | Remove the cpu_table: - move detection of whether c0_config[OD] is read-only and should be set to fix various chip errata to au1000 headers. - move detection of write-only sys_cpupll to au1000 headers. - remove the BCLK switching code: Activation of this features should be left to the boards using the chips since it also affects external devices tied to BCLK, and only the board designers know whether it is safe to enable. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/cputable.c
* MIPS: Alchemy: remove get/set_au1x00_lcd_clock().Manuel Lauss2009-01-11
| | | | | | | There are no in-tree users, so remove them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: pb1200: update CPLD cascade irq handler.Manuel Lauss2009-01-11
| | | | | | | Tested on Db1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: update core interrupt code.Manuel Lauss2009-01-11
| | | | | | | | | | | | | | | | | | | | | | | This patch attempts to modernize core Alchemy interrupt handling code. - add irq_chips for irq controllers instead of irq type, - add a set_type() hook to change irq trigger type during runtime, - add a set_wake() hook to control GPIO0..7 based wakeup, - use linux' IRQF_TRIGGER_ constants instead of homebrew ones, - enable GENERIC_HARDIRQS_NO__DO_IRQ. - simplify plat_irq_dispatch - merge au1xxx_irqmap into irq.c file, the only place where its contents are referenced. - board_init_irq() is now mandatory for every board; use it to register the remaining (gpio-based) interrupt sources; update all boards accordingly. Run-tested on Db1200 and other Au1200 based platforms. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
* MIPS: Alchemy: move commandline mangling out of common codeManuel Lauss2009-01-11
| | | | | | | | | | | Not every alchemy-based board might want these options forced on it, and most of this stuff seems to be intended for devboard code anyway. Remove commandline mangling code out of common chip code and instead add relevant sections to all in-tree boards to not change existing behaviour. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: devboards: consolidate filesManuel Lauss2009-01-11
| | | | | | | | | | | | | | | | | | | | | | | Share some code and merge small files: - Extract the prom init code from all devboard files (they only differ in memory configuration). - Merge the irq configuration into board setup code. - Merge smaller files into board setup code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c create mode 100644 arch/mips/alchemy/devboards/prom.c
* MIPS: Alchemy: Move development board code to common subdirectoryManuel Lauss2009-01-11
| | | | | | | This should ease sharing of common devboard code. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Change strict_strtol to strict_strtoulJulia Lawall2009-01-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since memsize is unsigned, it would seem better to use strict_strtoul that strict_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @s2@ long e; position p; @@ strict_strtol@p(...,&e) @@ position p != s2.p; type T; T e; @@ - strict_strtol@p + strict_strtoul (...,&e) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.Manuel Lauss2008-10-27
| | | | | | | | Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD controllers for them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Alchemy: rename directoryRalf Baechle2008-10-11
It's more than the au1000 these days. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 14:58:05 -0500