aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-sparc/dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-sparc/dma.h')
-rw-r--r--include/asm-sparc/dma.h290
1 files changed, 5 insertions, 285 deletions
diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h
index 959d6c8a71a..8cc69bfaae2 100644
--- a/include/asm-sparc/dma.h
+++ b/include/asm-sparc/dma.h
@@ -1,288 +1,8 @@
1/* include/asm-sparc/dma.h 1#ifndef ___ASM_SPARC_DMA_H
2 * 2#define ___ASM_SPARC_DMA_H
3 * Copyright 1995 (C) David S. Miller (davem@davemloft.net) 3#if defined(__sparc__) && defined(__arch64__)
4 */ 4#include <asm-sparc/dma_64.h>
5
6#ifndef _ASM_SPARC_DMA_H
7#define _ASM_SPARC_DMA_H
8
9#include <linux/kernel.h>
10#include <linux/types.h>
11
12#include <asm/vac-ops.h> /* for invalidate's, etc. */
13#include <asm/sbus.h>
14#include <asm/delay.h>
15#include <asm/oplib.h>
16#include <asm/system.h>
17#include <asm/io.h>
18#include <linux/spinlock.h>
19
20struct page;
21extern spinlock_t dma_spin_lock;
22
23static inline unsigned long claim_dma_lock(void)
24{
25 unsigned long flags;
26 spin_lock_irqsave(&dma_spin_lock, flags);
27 return flags;
28}
29
30static inline void release_dma_lock(unsigned long flags)
31{
32 spin_unlock_irqrestore(&dma_spin_lock, flags);
33}
34
35/* These are irrelevant for Sparc DMA, but we leave it in so that
36 * things can compile.
37 */
38#define MAX_DMA_CHANNELS 8
39#define MAX_DMA_ADDRESS (~0UL)
40#define DMA_MODE_READ 1
41#define DMA_MODE_WRITE 2
42
43/* Useful constants */
44#define SIZE_16MB (16*1024*1024)
45#define SIZE_64K (64*1024)
46
47/* SBUS DMA controller reg offsets */
48#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */
49#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */
50#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */
51#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */
52
53/* DVMA chip revisions */
54enum dvma_rev {
55 dvmarev0,
56 dvmaesc1,
57 dvmarev1,
58 dvmarev2,
59 dvmarev3,
60 dvmarevplus,
61 dvmahme
62};
63
64#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1)
65
66/* Linux DMA information structure, filled during probe. */
67struct sbus_dma {
68 struct sbus_dma *next;
69 struct sbus_dev *sdev;
70 void __iomem *regs;
71
72 /* Status, misc info */
73 int node; /* Prom node for this DMA device */
74 int running; /* Are we doing DMA now? */
75 int allocated; /* Are we "owned" by anyone yet? */
76
77 /* Transfer information. */
78 unsigned long addr; /* Start address of current transfer */
79 int nbytes; /* Size of current transfer */
80 int realbytes; /* For splitting up large transfers, etc. */
81
82 /* DMA revision */
83 enum dvma_rev revision;
84};
85
86extern struct sbus_dma *dma_chain;
87
88/* Broken hardware... */
89#ifdef CONFIG_SUN4
90/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
91 * Or is rev0 present only on sun4 boxes? -jj */
92#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
93#else 5#else
94#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) 6#include <asm-sparc/dma_32.h>
95#endif 7#endif
96#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1)
97
98/* Main routines in dma.c */
99extern void dvma_init(struct sbus_bus *);
100
101/* Fields in the cond_reg register */
102/* First, the version identification bits */
103#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */
104#define DMA_VERS0 0x00000000 /* Sunray DMA version */
105#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */
106#define DMA_VERS1 0x80000000 /* DMA rev 1 */
107#define DMA_VERS2 0xa0000000 /* DMA rev 2 */
108#define DMA_VERHME 0xb0000000 /* DMA hme gate array */
109#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */
110
111#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */
112#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */
113#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */
114#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */
115#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */
116#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */
117#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */
118#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */
119#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */
120#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */
121#define DMA_ST_WRITE 0x00000100 /* write from device to memory */
122#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */
123#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */
124#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */
125#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */
126#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */
127#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */
128#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */
129#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */
130#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */
131#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */
132#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */
133#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */
134#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */
135#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */
136#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */
137#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */
138#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */
139#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */
140#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */
141#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */
142#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */
143#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */
144#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */
145#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */
146#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */
147#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */
148#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */
149#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */
150#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */
151#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */
152#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */
153#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */
154
155/* Values describing the burst-size property from the PROM */
156#define DMA_BURST1 0x01
157#define DMA_BURST2 0x02
158#define DMA_BURST4 0x04
159#define DMA_BURST8 0x08
160#define DMA_BURST16 0x10
161#define DMA_BURST32 0x20
162#define DMA_BURST64 0x40
163#define DMA_BURSTBITS 0x7f
164
165/* Determine highest possible final transfer address given a base */
166#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
167
168/* Yes, I hack a lot of elisp in my spare time... */
169#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR))
170#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
171#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE))
172#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE)))
173#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
174#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
175#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
176#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr))
177#define DMA_BEGINDMA_W(regs) \
178 ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
179#define DMA_BEGINDMA_R(regs) \
180 ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
181
182/* For certain DMA chips, we need to disable ints upon irq entry
183 * and turn them back on when we are done. So in any ESP interrupt
184 * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
185 * when leaving the handler. You have been warned...
186 */
187#define DMA_IRQ_ENTRY(dma, dregs) do { \
188 if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
189 } while (0)
190
191#define DMA_IRQ_EXIT(dma, dregs) do { \
192 if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
193 } while(0)
194
195#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */
196/* Pause until counter runs out or BIT isn't set in the DMA condition
197 * register.
198 */
199static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
200 unsigned long bit)
201{
202 int ctr = 50000; /* Let's find some bugs ;) */
203
204 /* Busy wait until the bit is not set any more */
205 while((regs->cond_reg&bit) && (ctr>0)) {
206 ctr--;
207 __delay(5);
208 }
209
210 /* Check for bogus outcome. */
211 if(!ctr)
212 panic("DMA timeout");
213}
214
215/* Reset the friggin' thing... */
216#define DMA_RESET(dma) do { \
217 struct sparc_dma_registers *regs = dma->regs; \
218 /* Let the current FIFO drain itself */ \
219 sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \
220 /* Reset the logic */ \
221 regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \
222 __delay(400); /* let the bits set ;) */ \
223 regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \
224 sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \
225 /* Enable FAST transfers if available */ \
226 if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \
227 dma->running = 0; \
228} while(0)
229#endif 8#endif
230
231#define for_each_dvma(dma) \
232 for((dma) = dma_chain; (dma); (dma) = (dma)->next)
233
234extern int get_dma_list(char *);
235extern int request_dma(unsigned int, __const__ char *);
236extern void free_dma(unsigned int);
237
238/* From PCI */
239
240#ifdef CONFIG_PCI
241extern int isa_dma_bridge_buggy;
242#else
243#define isa_dma_bridge_buggy (0)
244#endif
245
246/* Routines for data transfer buffers. */
247BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
248BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long)
249
250#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
251#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
252
253/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
254BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
255BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
256BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
257BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
258
259#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
260#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
261#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
262#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
263
264/*
265 * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
266 *
267 * The mmu_map_dma_area establishes two mappings in one go.
268 * These mappings point to pages normally mapped at 'va' (linear address).
269 * First mapping is for CPU visible address at 'a', uncached.
270 * This is an alias, but it works because it is an uncached mapping.
271 * Second mapping is for device visible address, or "bus" address.
272 * The bus address is returned at '*pba'.
273 *
274 * These functions seem distinct, but are hard to split. On sun4c,
275 * at least for now, 'a' is equal to bus address, and retured in *pba.
276 * On sun4m, page attributes depend on the CPU type, so we have to
277 * know if we are mapping RAM or I/O, so it has to be an additional argument
278 * to a separate mapping function for CPU visible mappings.
279 */
280BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
281BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
282BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len)
283
284#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
285#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
286#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba)
287
288#endif /* !(_ASM_SPARC_DMA_H) */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-29 03:34:33 -0500