1 files changed, 188 insertions, 0 deletions

diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig
new file mode 100644
index 00000000000..6ae169cd8fa
--- /dev/null
+++ b/fs/jffs2/Kconfig
@@ -0,0 +1,188 @@
+config JFFS2_FS
+        tristate "Journalling Flash File System v2 (JFFS2) support"
+        select CRC32
+        depends on MTD
+        help
+          JFFS2 is the second generation of the Journalling Flash File System
+          for use on diskless embedded devices. It provides improved wear
+          levelling, compression and support for hard links. You cannot use
+          this on normal block devices, only on 'MTD' devices.
+
+          Further information on the design and implementation of JFFS2 is
+          available at <http://sources.redhat.com/jffs2/>.
+
+config JFFS2_FS_DEBUG
+        int "JFFS2 debugging verbosity (0 = quiet, 2 = noisy)"
+        depends on JFFS2_FS
+        default "0"
+        help
+          This controls the amount of debugging messages produced by the JFFS2
+          code. Set it to zero for use in production systems. For evaluation,
+          testing and debugging, it's advisable to set it to one. This will
+          enable a few assertions and will print debugging messages at the
+          KERN_DEBUG loglevel, where they won't normally be visible. Level 2
+          is unlikely to be useful - it enables extra debugging in certain
+          areas which at one point needed debugging, but when the bugs were
+          located and fixed, the detailed messages were relegated to level 2.
+
+          If reporting bugs, please try to have available a full dump of the
+          messages at debug level 1 while the misbehaviour was occurring.
+
+config JFFS2_FS_WRITEBUFFER
+        bool "JFFS2 write-buffering support"
+        depends on JFFS2_FS
+        default y
+        help
+          This enables the write-buffering support in JFFS2.
+
+          This functionality is required to support JFFS2 on the following
+          types of flash devices:
+            - NAND flash
+            - NOR flash with transparent ECC
+            - DataFlash
+
+config JFFS2_FS_WBUF_VERIFY
+        bool "Verify JFFS2 write-buffer reads"
+        depends on JFFS2_FS_WRITEBUFFER
+        default n
+        help
+          This causes JFFS2 to read back every page written through the
+          write-buffer, and check for errors.
+
+config JFFS2_SUMMARY
+        bool "JFFS2 summary support (EXPERIMENTAL)"
+        depends on JFFS2_FS && EXPERIMENTAL
+        default n
+        help
+          This feature makes it possible to use summary information
+          for faster filesystem mount.
+
+          The summary information can be inserted into a filesystem image
+          by the utility 'sumtool'.
+
+          If unsure, say 'N'.
+
+config JFFS2_FS_XATTR
+        bool "JFFS2 XATTR support (EXPERIMENTAL)"
+        depends on JFFS2_FS && EXPERIMENTAL
+        default n
+        help
+          Extended attributes are name:value pairs associated with inodes by
+          the kernel or by users (see the attr(5) manual page, or visit
+          <http://acl.bestbits.at/> for details).
+
+          If unsure, say N.
+
+config JFFS2_FS_POSIX_ACL
+        bool "JFFS2 POSIX Access Control Lists"
+        depends on JFFS2_FS_XATTR
+        default y
+        select FS_POSIX_ACL
+        help
+          Posix Access Control Lists (ACLs) support permissions for users and
+          groups beyond the owner/group/world scheme.
+
+          To learn more about Access Control Lists, visit the Posix ACLs for
+          Linux website <http://acl.bestbits.at/>.
+
+          If you don't know what Access Control Lists are, say N
+
+config JFFS2_FS_SECURITY
+        bool "JFFS2 Security Labels"
+        depends on JFFS2_FS_XATTR
+        default y
+        help
+          Security labels support alternative access control models
+          implemented by security modules like SELinux.  This option
+          enables an extended attribute handler for file security
+          labels in the jffs2 filesystem.
+
+          If you are not using a security module that requires using
+          extended attributes for file security labels, say N.
+
+config JFFS2_COMPRESSION_OPTIONS
+        bool "Advanced compression options for JFFS2"
+        depends on JFFS2_FS
+        default n
+        help
+          Enabling this option allows you to explicitly choose which
+          compression modules, if any, are enabled in JFFS2. Removing
+          compressors can mean you cannot read existing file systems,
+          and enabling experimental compressors can mean that you
+          write a file system which cannot be read by a standard kernel.
+
+          If unsure, you should _definitely_ say 'N'.
+
+config JFFS2_ZLIB
+        bool "JFFS2 ZLIB compression support" if JFFS2_COMPRESSION_OPTIONS
+        select ZLIB_INFLATE
+        select ZLIB_DEFLATE
+        depends on JFFS2_FS
+        default y
+        help
+          Zlib is designed to be a free, general-purpose, legally unencumbered,
+          lossless data-compression library for use on virtually any computer
+          hardware and operating system. See <http://www.gzip.org/zlib/> for
+          further information.
+
+          Say 'Y' if unsure.
+
+config JFFS2_LZO
+        bool "JFFS2 LZO compression support" if JFFS2_COMPRESSION_OPTIONS
+        select LZO_COMPRESS
+        select LZO_DECOMPRESS
+        depends on JFFS2_FS
+        default n
+        help
+          minilzo-based compression. Generally works better than Zlib.
+
+          This feature was added in July, 2007. Say 'N' if you need
+          compatibility with older bootloaders or kernels.
+
+config JFFS2_RTIME
+        bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
+        depends on JFFS2_FS
+        default y
+        help
+          Rtime does manage to recompress already-compressed data. Say 'Y' if unsure.
+
+config JFFS2_RUBIN
+        bool "JFFS2 RUBIN compression support" if JFFS2_COMPRESSION_OPTIONS
+        depends on JFFS2_FS
+        default n
+        help
+          RUBINMIPS and DYNRUBIN compressors. Say 'N' if unsure.
+
+choice
+        prompt "JFFS2 default compression mode" if JFFS2_COMPRESSION_OPTIONS
+        default JFFS2_CMODE_PRIORITY
+        depends on JFFS2_FS
+        help
+          You can set here the default compression mode of JFFS2 from
+          the available compression modes. Don't touch if unsure.
+
+config JFFS2_CMODE_NONE
+        bool "no compression"
+        help
+          Uses no compression.
+
+config JFFS2_CMODE_PRIORITY
+        bool "priority"
+        help
+          Tries the compressors in a predefined order and chooses the first
+          successful one.
+
+config JFFS2_CMODE_SIZE
+        bool "size (EXPERIMENTAL)"
+        help
+          Tries all compressors and chooses the one which has the smallest
+          result.
+
+config JFFS2_CMODE_FAVOURLZO
+        bool "Favour LZO"
+        help
+          Tries all compressors and chooses the one which has the smallest
+          result but gives some preference to LZO (which has faster
+          decompression) at the expense of size.
+
+endchoice