1 files changed, 184 insertions, 92 deletions

diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index f4440d32931..509ace7e688 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -38,6 +38,8 @@
  *              Fix some spin_locks.
  *              Do not call uart_add_one_port for absent ports.
  *      1.07    Use CONFIG_SERIAL_TXX9_NR_UARTS.  Cleanup.
+ *      1.08    Use platform_device.
+ *              Fix and cleanup suspend/resume/initialization codes.
  */
 
 #if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
@@ -50,7 +52,7 @@
 #include <linux/console.h>
 #include <linux/sysrq.h>
 #include <linux/delay.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -60,7 +62,7 @@
 
 #include <asm/io.h>
 
-static char *serial_version = "1.07";
+static char *serial_version = "1.08";
 static char *serial_name = "TX39/49 Serial driver";
 
 #define PASS_LIMIT      256
@@ -94,12 +96,7 @@ static char *serial_name = "TX39/49 Serial driver";
 
 struct uart_txx9_port {
         struct uart_port        port;
-
-        /*
-         * We provide a per-port pm hook.
-         */
-        void                    (*pm)(struct uart_port *port,
-                                      unsigned int state, unsigned int old);
+        /* No additional info for now */
 };
 
 #define TXX9_REGION_SIZE        0x24
@@ -277,6 +274,31 @@ static void serial_txx9_enable_ms(struct uart_port *port)
         /* TXX9-SIO can not control DTR... */
 }
 
+static void serial_txx9_initialize(struct uart_port *port)
+{
+        struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+        unsigned int tmout = 10000;
+
+        sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
+        /* TX4925 BUG WORKAROUND.  Accessing SIOC register
+         * immediately after soft reset causes bus error. */
+        mmiowb();
+        udelay(1);
+        while ((sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST) && --tmout)
+                udelay(1);
+        /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
+        sio_set(up, TXX9_SIFCR,
+                TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
+        /* initial settings */
+        sio_out(up, TXX9_SILCR,
+                TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
+                ((up->port.flags & UPF_TXX9_USE_SCLK) ?
+                 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
+        sio_quot_set(up, uart_get_divisor(port, 9600));
+        sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+        sio_out(up, TXX9_SIDICR, 0);
+}
+
 static inline void
 receive_chars(struct uart_txx9_port *up, unsigned int *status)
 {
@@ -657,9 +679,8 @@ static void
 serial_txx9_pm(struct uart_port *port, unsigned int state,
               unsigned int oldstate)
 {
-        struct uart_txx9_port *up = (struct uart_txx9_port *)port;
-        if (up->pm)
-                up->pm(port, state, oldstate);
+        if (state == 0)
+                serial_txx9_initialize(port);
 }
 
 static int serial_txx9_request_resource(struct uart_txx9_port *up)
@@ -732,7 +753,6 @@ static int serial_txx9_request_port(struct uart_port *port)
 static void serial_txx9_config_port(struct uart_port *port, int uflags)
 {
         struct uart_txx9_port *up = (struct uart_txx9_port *)port;
-        unsigned long flags;
         int ret;
 
         /*
@@ -749,30 +769,7 @@ static void serial_txx9_config_port(struct uart_port *port, int uflags)
         if (up->port.line == up->port.cons->index)
                 return;
 #endif
-        spin_lock_irqsave(&up->port.lock, flags);
-        /*
-         * Reset the UART.
-         */
-        sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
-#ifdef CONFIG_CPU_TX49XX
-        /* TX4925 BUG WORKAROUND.  Accessing SIOC register
-         * immediately after soft reset causes bus error. */
-        iob();
-        udelay(1);
-#endif
-        while (sio_in(up, TXX9_SIFCR) & TXX9_SIFCR_SWRST)
-                ;
-        /* TX Int by FIFO Empty, RX Int by Receiving 1 char. */
-        sio_set(up, TXX9_SIFCR,
-                TXX9_SIFCR_TDIL_MAX | TXX9_SIFCR_RDIL_1);
-        /* initial settings */
-        sio_out(up, TXX9_SILCR,
-                TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
-                ((up->port.flags & UPF_TXX9_USE_SCLK) ?
-                 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
-        sio_quot_set(up, uart_get_divisor(port, 9600));
-        sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
-        spin_unlock_irqrestore(&up->port.lock, flags);
+        serial_txx9_initialize(port);
 }
 
 static int
@@ -818,7 +815,8 @@ static struct uart_ops serial_txx9_pops = {
 
 static struct uart_txx9_port serial_txx9_ports[UART_NR];
 
-static void __init serial_txx9_register_ports(struct uart_driver *drv)
+static void __init serial_txx9_register_ports(struct uart_driver *drv,
+                                              struct device *dev)
 {
         int i;
 
@@ -827,6 +825,7 @@ static void __init serial_txx9_register_ports(struct uart_driver *drv)
 
                 up->port.line = i;
                 up->port.ops = &serial_txx9_pops;
+                up->port.dev = dev;
                 if (up->port.iobase || up->port.mapbase)
                         uart_add_one_port(drv, &up->port);
         }
@@ -898,7 +897,7 @@ serial_txx9_console_write(struct console *co, const char *s, unsigned int count)
         sio_out(up, TXX9_SIDICR, ier);
 }
 
-static int serial_txx9_console_setup(struct console *co, char *options)
+static int __init serial_txx9_console_setup(struct console *co, char *options)
 {
         struct uart_port *port;
         struct uart_txx9_port *up;
@@ -919,17 +918,7 @@ static int serial_txx9_console_setup(struct console *co, char *options)
         if (!port->ops)
                 return -ENODEV;
 
-        /*
-         *      Disable UART interrupts, set DTR and RTS high
-         *      and set speed.
-         */
-        sio_out(up, TXX9_SIDICR, 0);
-        /* initial settings */
-        sio_out(up, TXX9_SILCR,
-                TXX9_SILCR_UMODE_8BIT | TXX9_SILCR_USBL_1BIT |
-                ((port->flags & UPF_TXX9_USE_SCLK) ?
-                 TXX9_SILCR_SCS_SCLK_BG : TXX9_SILCR_SCS_IMCLK_BG));
-        sio_out(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSTL_MAX /* 15 */);
+        serial_txx9_initialize(&up->port);
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -981,31 +970,6 @@ int __init early_serial_txx9_setup(struct uart_port *port)
         return 0;
 }
 
-#ifdef ENABLE_SERIAL_TXX9_PCI
-#ifdef CONFIG_PM
-/**
- *      serial_txx9_suspend_port - suspend one serial port
- *      @line:  serial line number
- *
- *      Suspend one serial port.
- */
-static void serial_txx9_suspend_port(int line)
-{
-        uart_suspend_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
-}
-
-/**
- *      serial_txx9_resume_port - resume one serial port
- *      @line:  serial line number
- *
- *      Resume one serial port.
- */
-static void serial_txx9_resume_port(int line)
-{
-        uart_resume_port(&serial_txx9_reg, &serial_txx9_ports[line].port);
-}
-#endif
-
 static DEFINE_MUTEX(serial_txx9_mutex);
 
 /**
@@ -1028,8 +992,18 @@ static int __devinit serial_txx9_register_port(struct uart_port *port)
         mutex_lock(&serial_txx9_mutex);
         for (i = 0; i < UART_NR; i++) {
                 uart = &serial_txx9_ports[i];
-                if (!(uart->port.iobase || uart->port.mapbase))
+                if (uart_match_port(&uart->port, port)) {
+                        uart_remove_one_port(&serial_txx9_reg, &uart->port);
                         break;
+                }
+        }
+        if (i == UART_NR) {
+                /* Find unused port */
+                for (i = 0; i < UART_NR; i++) {
+                        uart = &serial_txx9_ports[i];
+                        if (!(uart->port.iobase || uart->port.mapbase))
+                                break;
+                }
         }
         if (i < UART_NR) {
                 uart->port.iobase = port->iobase;
@@ -1072,6 +1046,95 @@ static void __devexit serial_txx9_unregister_port(int line)
 }
 
 /*
+ * Register a set of serial devices attached to a platform device.
+ */
+static int __devinit serial_txx9_probe(struct platform_device *dev)
+{
+        struct uart_port *p = dev->dev.platform_data;
+        struct uart_port port;
+        int ret, i;
+
+        memset(&port, 0, sizeof(struct uart_port));
+        for (i = 0; p && p->uartclk != 0; p++, i++) {
+                port.iobase     = p->iobase;
+                port.membase    = p->membase;
+                port.irq        = p->irq;
+                port.uartclk    = p->uartclk;
+                port.iotype     = p->iotype;
+                port.flags      = p->flags;
+                port.mapbase    = p->mapbase;
+                port.dev        = &dev->dev;
+                ret = serial_txx9_register_port(&port);
+                if (ret < 0) {
+                        dev_err(&dev->dev, "unable to register port at index %d "
+                                "(IO%x MEM%lx IRQ%d): %d\n", i,
+                                p->iobase, p->mapbase, p->irq, ret);
+                }
+        }
+        return 0;
+}
+
+/*
+ * Remove serial ports registered against a platform device.
+ */
+static int __devexit serial_txx9_remove(struct platform_device *dev)
+{
+        int i;
+
+        for (i = 0; i < UART_NR; i++) {
+                struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+                if (up->port.dev == &dev->dev)
+                        serial_txx9_unregister_port(i);
+        }
+        return 0;
+}
+
+#ifdef CONFIG_PM
+static int serial_txx9_suspend(struct platform_device *dev, pm_message_t state)
+{
+        int i;
+
+        for (i = 0; i < UART_NR; i++) {
+                struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+                if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+                        uart_suspend_port(&serial_txx9_reg, &up->port);
+        }
+
+        return 0;
+}
+
+static int serial_txx9_resume(struct platform_device *dev)
+{
+        int i;
+
+        for (i = 0; i < UART_NR; i++) {
+                struct uart_txx9_port *up = &serial_txx9_ports[i];
+
+                if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
+                        uart_resume_port(&serial_txx9_reg, &up->port);
+        }
+
+        return 0;
+}
+#endif
+
+static struct platform_driver serial_txx9_plat_driver = {
+        .probe          = serial_txx9_probe,
+        .remove         = __devexit_p(serial_txx9_remove),
+#ifdef CONFIG_PM
+        .suspend        = serial_txx9_suspend,
+        .resume         = serial_txx9_resume,
+#endif
+        .driver         = {
+                .name   = "serial_txx9",
+                .owner  = THIS_MODULE,
+        },
+};
+
+#ifdef ENABLE_SERIAL_TXX9_PCI
+/*
  * Probe one serial board.  Unfortunately, there is no rhyme nor reason
  * to the arrangement of serial ports on a PCI card.
  */
@@ -1097,20 +1160,22 @@ pciserial_txx9_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
         line = serial_txx9_register_port(&port);
         if (line < 0) {
                 printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
+                pci_disable_device(dev);
+                return line;
         }
-        pci_set_drvdata(dev, (void *)(long)line);
+        pci_set_drvdata(dev, &serial_txx9_ports[line]);
 
         return 0;
 }
 
 static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
 {
-        int line = (int)(long)pci_get_drvdata(dev);
+        struct uart_txx9_port *up = pci_get_drvdata(dev);
 
         pci_set_drvdata(dev, NULL);
 
-        if (line) {
-                serial_txx9_unregister_port(line);
+        if (up) {
+                serial_txx9_unregister_port(up->port.line);
                 pci_disable_device(dev);
         }
 }
@@ -1118,10 +1183,10 @@ static void __devexit pciserial_txx9_remove_one(struct pci_dev *dev)
 #ifdef CONFIG_PM
 static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
 {
-        int line = (int)(long)pci_get_drvdata(dev);
+        struct uart_txx9_port *up = pci_get_drvdata(dev);
 
-        if (line)
-                serial_txx9_suspend_port(line);
+        if (up)
+                uart_suspend_port(&serial_txx9_reg, &up->port);
         pci_save_state(dev);
         pci_set_power_state(dev, pci_choose_state(dev, state));
         return 0;
@@ -1129,15 +1194,12 @@ static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
 
 static int pciserial_txx9_resume_one(struct pci_dev *dev)
 {
-        int line = (int)(long)pci_get_drvdata(dev);
+        struct uart_txx9_port *up = pci_get_drvdata(dev);
 
         pci_set_power_state(dev, PCI_D0);
         pci_restore_state(dev);
-
-        if (line) {
-                pci_enable_device(dev);
-                serial_txx9_resume_port(line);
-        }
+        if (up)
+                uart_resume_port(&serial_txx9_reg, &up->port);
         return 0;
 }
 #endif
@@ -1161,6 +1223,8 @@ static struct pci_driver serial_txx9_pci_driver = {
 MODULE_DEVICE_TABLE(pci, serial_txx9_pci_tbl);
 #endif /* ENABLE_SERIAL_TXX9_PCI */
 
+static struct platform_device *serial_txx9_plat_devs;
+
 static int __init serial_txx9_init(void)
 {
         int ret;
@@ -1168,13 +1232,39 @@ static int __init serial_txx9_init(void)
         printk(KERN_INFO "%s version %s\n", serial_name, serial_version);
 
         ret = uart_register_driver(&serial_txx9_reg);
-        if (ret >= 0) {
-                serial_txx9_register_ports(&serial_txx9_reg);
+        if (ret)
+                goto out;
+
+        serial_txx9_plat_devs = platform_device_alloc("serial_txx9", -1);
+        if (!serial_txx9_plat_devs) {
+                ret = -ENOMEM;
+                goto unreg_uart_drv;
+        }
+
+        ret = platform_device_add(serial_txx9_plat_devs);
+        if (ret)
+                goto put_dev;
+
+        serial_txx9_register_ports(&serial_txx9_reg,
+                                   &serial_txx9_plat_devs->dev);
+
+        ret = platform_driver_register(&serial_txx9_plat_driver);
+        if (ret)
+                goto del_dev;
 
 #ifdef ENABLE_SERIAL_TXX9_PCI
-                ret = pci_register_driver(&serial_txx9_pci_driver);
+        ret = pci_register_driver(&serial_txx9_pci_driver);
 #endif
-        }
+        if (ret == 0)
+                goto out;
+
+ del_dev:
+        platform_device_del(serial_txx9_plat_devs);
+ put_dev:
+        platform_device_put(serial_txx9_plat_devs);
+ unreg_uart_drv:
+        uart_unregister_driver(&serial_txx9_reg);
+ out:
         return ret;
 }
 
@@ -1185,6 +1275,8 @@ static void __exit serial_txx9_exit(void)
 #ifdef ENABLE_SERIAL_TXX9_PCI
         pci_unregister_driver(&serial_txx9_pci_driver);
 #endif
+        platform_driver_unregister(&serial_txx9_plat_driver);
+        platform_device_unregister(serial_txx9_plat_devs);
         for (i = 0; i < UART_NR; i++) {
                 struct uart_txx9_port *up = &serial_txx9_ports[i];
                 if (up->port.iobase || up->port.mapbase)