diff options
Diffstat (limited to 'drivers/mtd/devices/mtd_dataflash.c')
-rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 135 |
1 files changed, 121 insertions, 14 deletions
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index b35e4813a3a..54e36bfc2c3 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c | |||
@@ -82,7 +82,7 @@ | |||
82 | 82 | ||
83 | 83 | ||
84 | struct dataflash { | 84 | struct dataflash { |
85 | u8 command[4]; | 85 | uint8_t command[4]; |
86 | char name[24]; | 86 | char name[24]; |
87 | 87 | ||
88 | unsigned partitioned:1; | 88 | unsigned partitioned:1; |
@@ -150,7 +150,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) | |||
150 | struct spi_transfer x = { .tx_dma = 0, }; | 150 | struct spi_transfer x = { .tx_dma = 0, }; |
151 | struct spi_message msg; | 151 | struct spi_message msg; |
152 | unsigned blocksize = priv->page_size << 3; | 152 | unsigned blocksize = priv->page_size << 3; |
153 | u8 *command; | 153 | uint8_t *command; |
154 | 154 | ||
155 | DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", | 155 | DEBUG(MTD_DEBUG_LEVEL2, "%s: erase addr=0x%x len 0x%x\n", |
156 | spi->dev.bus_id, | 156 | spi->dev.bus_id, |
@@ -182,8 +182,8 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) | |||
182 | pageaddr = pageaddr << priv->page_offset; | 182 | pageaddr = pageaddr << priv->page_offset; |
183 | 183 | ||
184 | command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; | 184 | command[0] = do_block ? OP_ERASE_BLOCK : OP_ERASE_PAGE; |
185 | command[1] = (u8)(pageaddr >> 16); | 185 | command[1] = (uint8_t)(pageaddr >> 16); |
186 | command[2] = (u8)(pageaddr >> 8); | 186 | command[2] = (uint8_t)(pageaddr >> 8); |
187 | command[3] = 0; | 187 | command[3] = 0; |
188 | 188 | ||
189 | DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", | 189 | DEBUG(MTD_DEBUG_LEVEL3, "ERASE %s: (%x) %x %x %x [%i]\n", |
@@ -234,7 +234,7 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, | |||
234 | struct spi_transfer x[2] = { { .tx_dma = 0, }, }; | 234 | struct spi_transfer x[2] = { { .tx_dma = 0, }, }; |
235 | struct spi_message msg; | 235 | struct spi_message msg; |
236 | unsigned int addr; | 236 | unsigned int addr; |
237 | u8 *command; | 237 | uint8_t *command; |
238 | int status; | 238 | int status; |
239 | 239 | ||
240 | DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", | 240 | DEBUG(MTD_DEBUG_LEVEL2, "%s: read 0x%x..0x%x\n", |
@@ -274,9 +274,9 @@ static int dataflash_read(struct mtd_info *mtd, loff_t from, size_t len, | |||
274 | * fewer "don't care" bytes. Both buffers stay unchanged. | 274 | * fewer "don't care" bytes. Both buffers stay unchanged. |
275 | */ | 275 | */ |
276 | command[0] = OP_READ_CONTINUOUS; | 276 | command[0] = OP_READ_CONTINUOUS; |
277 | command[1] = (u8)(addr >> 16); | 277 | command[1] = (uint8_t)(addr >> 16); |
278 | command[2] = (u8)(addr >> 8); | 278 | command[2] = (uint8_t)(addr >> 8); |
279 | command[3] = (u8)(addr >> 0); | 279 | command[3] = (uint8_t)(addr >> 0); |
280 | /* plus 4 "don't care" bytes */ | 280 | /* plus 4 "don't care" bytes */ |
281 | 281 | ||
282 | status = spi_sync(priv->spi, &msg); | 282 | status = spi_sync(priv->spi, &msg); |
@@ -311,7 +311,7 @@ static int dataflash_write(struct mtd_info *mtd, loff_t to, size_t len, | |||
311 | size_t remaining = len; | 311 | size_t remaining = len; |
312 | u_char *writebuf = (u_char *) buf; | 312 | u_char *writebuf = (u_char *) buf; |
313 | int status = -EINVAL; | 313 | int status = -EINVAL; |
314 | u8 *command; | 314 | uint8_t *command; |
315 | 315 | ||
316 | DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", | 316 | DEBUG(MTD_DEBUG_LEVEL2, "%s: write 0x%x..0x%x\n", |
317 | spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); | 317 | spi->dev.bus_id, (unsigned)to, (unsigned)(to + len)); |
@@ -487,7 +487,9 @@ add_dataflash(struct spi_device *spi, char *name, | |||
487 | device->write = dataflash_write; | 487 | device->write = dataflash_write; |
488 | device->priv = priv; | 488 | device->priv = priv; |
489 | 489 | ||
490 | dev_info(&spi->dev, "%s (%d KBytes)\n", name, device->size/1024); | 490 | dev_info(&spi->dev, "%s (%d KBytes) pagesize %d bytes, " |
491 | "erasesize %d bytes\n", name, device->size/1024, | ||
492 | pagesize, pagesize * 8); /* 8 pages = 1 block */ | ||
491 | dev_set_drvdata(&spi->dev, priv); | 493 | dev_set_drvdata(&spi->dev, priv); |
492 | 494 | ||
493 | if (mtd_has_partitions()) { | 495 | if (mtd_has_partitions()) { |
@@ -521,7 +523,7 @@ add_dataflash(struct spi_device *spi, char *name, | |||
521 | * | 523 | * |
522 | * Device Density ID code #Pages PageSize Offset | 524 | * Device Density ID code #Pages PageSize Offset |
523 | * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 | 525 | * AT45DB011B 1Mbit (128K) xx0011xx (0x0c) 512 264 9 |
524 | * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1025 264 9 | 526 | * AT45DB021B 2Mbit (256K) xx0101xx (0x14) 1024 264 9 |
525 | * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 | 527 | * AT45DB041B 4Mbit (512K) xx0111xx (0x1c) 2048 264 9 |
526 | * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 | 528 | * AT45DB081B 8Mbit (1M) xx1001xx (0x24) 4096 264 9 |
527 | * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 | 529 | * AT45DB0161B 16Mbit (2M) xx1011xx (0x2c) 4096 528 10 |
@@ -529,9 +531,114 @@ add_dataflash(struct spi_device *spi, char *name, | |||
529 | * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 | 531 | * AT45DB0642 64Mbit (8M) xx111xxx (0x3c) 8192 1056 11 |
530 | * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 | 532 | * AT45DB1282 128Mbit (16M) xx0100xx (0x10) 16384 1056 11 |
531 | */ | 533 | */ |
534 | |||
535 | struct flash_info { | ||
536 | char *name; | ||
537 | |||
538 | /* JEDEC id zero means "no ID" (most older chips); otherwise it has | ||
539 | * a high byte of zero plus three data bytes: the manufacturer id, | ||
540 | * then a two byte device id. | ||
541 | */ | ||
542 | uint32_t jedec_id; | ||
543 | |||
544 | /* The size listed here is what works with OPCODE_SE, which isn't | ||
545 | * necessarily called a "sector" by the vendor. | ||
546 | */ | ||
547 | unsigned nr_pages; | ||
548 | uint16_t pagesize; | ||
549 | uint16_t pageoffset; | ||
550 | |||
551 | uint16_t flags; | ||
552 | #define SUP_POW2PS 0x02 | ||
553 | #define IS_POW2PS 0x01 | ||
554 | }; | ||
555 | |||
556 | static struct flash_info __devinitdata dataflash_data [] = { | ||
557 | |||
558 | { "at45db011d", 0x1f2200, 512, 264, 9, SUP_POW2PS}, | ||
559 | { "at45db011d", 0x1f2200, 512, 256, 8, SUP_POW2PS | IS_POW2PS}, | ||
560 | |||
561 | { "at45db021d", 0x1f2300, 1024, 264, 9, SUP_POW2PS}, | ||
562 | { "at45db021d", 0x1f2300, 1024, 256, 8, SUP_POW2PS | IS_POW2PS}, | ||
563 | |||
564 | { "at45db041d", 0x1f2400, 2048, 264, 9, SUP_POW2PS}, | ||
565 | { "at45db041d", 0x1f2400, 2048, 256, 8, SUP_POW2PS | IS_POW2PS}, | ||
566 | |||
567 | { "at45db081d", 0x1f2500, 4096, 264, 9, SUP_POW2PS}, | ||
568 | { "at45db081d", 0x1f2500, 4096, 256, 8, SUP_POW2PS | IS_POW2PS}, | ||
569 | |||
570 | { "at45db161d", 0x1f2600, 4096, 528, 10, SUP_POW2PS}, | ||
571 | { "at45db161d", 0x1f2600, 4096, 512, 9, SUP_POW2PS | IS_POW2PS}, | ||
572 | |||
573 | { "at45db321c", 0x1f2700, 8192, 528, 10, }, | ||
574 | |||
575 | { "at45db321d", 0x1f2701, 8192, 528, 10, SUP_POW2PS}, | ||
576 | { "at45db321d", 0x1f2701, 8192, 512, 9, SUP_POW2PS | IS_POW2PS}, | ||
577 | |||
578 | { "at45db641d", 0x1f2800, 8192, 1056, 11, SUP_POW2PS}, | ||
579 | { "at45db641d", 0x1f2800, 8192, 1024, 10, SUP_POW2PS | IS_POW2PS}, | ||
580 | }; | ||
581 | |||
582 | static struct flash_info *__devinit jedec_probe(struct spi_device *spi) | ||
583 | { | ||
584 | int tmp; | ||
585 | uint8_t code = OP_READ_ID; | ||
586 | uint8_t id[3]; | ||
587 | uint32_t jedec; | ||
588 | struct flash_info *info; | ||
589 | int status; | ||
590 | |||
591 | |||
592 | /* JEDEC also defines an optional "extended device information" | ||
593 | * string for after vendor-specific data, after the three bytes | ||
594 | * we use here. Supporting some chips might require using it. | ||
595 | */ | ||
596 | tmp = spi_write_then_read(spi, &code, 1, id, 3); | ||
597 | if (tmp < 0) { | ||
598 | DEBUG(MTD_DEBUG_LEVEL0, "%s: error %d reading JEDEC ID\n", | ||
599 | spi->dev.bus_id, tmp); | ||
600 | return NULL; | ||
601 | } | ||
602 | jedec = id[0]; | ||
603 | jedec = jedec << 8; | ||
604 | jedec |= id[1]; | ||
605 | jedec = jedec << 8; | ||
606 | jedec |= id[2]; | ||
607 | |||
608 | for (tmp = 0, info = dataflash_data; | ||
609 | tmp < ARRAY_SIZE(dataflash_data); | ||
610 | tmp++, info++) { | ||
611 | if (info->jedec_id == jedec) { | ||
612 | if (info->flags & SUP_POW2PS) { | ||
613 | status = dataflash_status(spi); | ||
614 | if (status & 0x1) | ||
615 | /* return power of 2 pagesize */ | ||
616 | return ++info; | ||
617 | else | ||
618 | return info; | ||
619 | } | ||
620 | } | ||
621 | } | ||
622 | return NULL; | ||
623 | } | ||
624 | |||
532 | static int __devinit dataflash_probe(struct spi_device *spi) | 625 | static int __devinit dataflash_probe(struct spi_device *spi) |
533 | { | 626 | { |
534 | int status; | 627 | int status; |
628 | struct flash_info *info; | ||
629 | |||
630 | /* | ||
631 | * Try to detect dataflash by JEDEC ID. | ||
632 | * If it succeeds we know we have either a C or D part. | ||
633 | * D will support power of 2 pagesize option. | ||
634 | */ | ||
635 | |||
636 | info = jedec_probe(spi); | ||
637 | |||
638 | if (info != NULL) | ||
639 | return add_dataflash(spi, info->name, info->nr_pages, | ||
640 | info->pagesize, info->pageoffset); | ||
641 | |||
535 | 642 | ||
536 | status = dataflash_status(spi); | 643 | status = dataflash_status(spi); |
537 | if (status <= 0 || status == 0xff) { | 644 | if (status <= 0 || status == 0xff) { |
@@ -551,16 +658,16 @@ static int __devinit dataflash_probe(struct spi_device *spi) | |||
551 | status = add_dataflash(spi, "AT45DB011B", 512, 264, 9); | 658 | status = add_dataflash(spi, "AT45DB011B", 512, 264, 9); |
552 | break; | 659 | break; |
553 | case 0x14: /* 0 1 0 1 x x */ | 660 | case 0x14: /* 0 1 0 1 x x */ |
554 | status = add_dataflash(spi, "AT45DB021B", 1025, 264, 9); | 661 | status = add_dataflash(spi, "AT45DB021B", 1024, 264, 9); |
555 | break; | 662 | break; |
556 | case 0x1c: /* 0 1 1 1 x x */ | 663 | case 0x1c: /* 0 1 1 1 x x */ |
557 | status = add_dataflash(spi, "AT45DB041x", 2048, 264, 9); | 664 | status = add_dataflash(spi, "AT45DB041B", 2048, 264, 9); |
558 | break; | 665 | break; |
559 | case 0x24: /* 1 0 0 1 x x */ | 666 | case 0x24: /* 1 0 0 1 x x */ |
560 | status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); | 667 | status = add_dataflash(spi, "AT45DB081B", 4096, 264, 9); |
561 | break; | 668 | break; |
562 | case 0x2c: /* 1 0 1 1 x x */ | 669 | case 0x2c: /* 1 0 1 1 x x */ |
563 | status = add_dataflash(spi, "AT45DB161x", 4096, 528, 10); | 670 | status = add_dataflash(spi, "AT45DB161B", 4096, 528, 10); |
564 | break; | 671 | break; |
565 | case 0x34: /* 1 1 0 1 x x */ | 672 | case 0x34: /* 1 1 0 1 x x */ |
566 | status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); | 673 | status = add_dataflash(spi, "AT45DB321x", 8192, 528, 10); |