320 files changed, 30411 insertions, 4875 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9adc7e5158c..14b03684ba8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -310,10 +310,9 @@ config ARCH_MXC
         bool "Freescale MXC/iMX-based"
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
-        select ARCH_MTD_XIP
-        select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
         select HAVE_CLK
+        select COMMON_CLKDEV
         help
           Support for Freescale MXC/iMX-based family of processors
 
@@ -497,7 +496,7 @@ config ARCH_ORION5X
           Orion-2 (5281), Orion-1-90 (6183).
 
 config ARCH_MMP
-        bool "Marvell PXA168/910"
+        bool "Marvell PXA168/910/MMP2"
         depends on MMU
         select GENERIC_GPIO
         select ARCH_REQUIRE_GPIOLIB
@@ -508,7 +507,7 @@ config ARCH_MMP
         select TICK_ONESHOT
         select PLAT_PXA
         help
-          Support for Marvell's PXA168/910 processor line.
+          Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
         bool "Micrel/Kendin KS8695"
@@ -584,6 +583,11 @@ config ARCH_MSM
           interface to the ARM9 modem processor which runs the baseband stack
           and controls some vital subsystems (clock and power control, etc).
 
+config ARCH_SHMOBILE
+        bool "Renesas SH-Mobile"
+        help
+          Support for Renesas's SH-Mobile ARM platforms
+
 config ARCH_RPC
         bool "RiscPC"
         select ARCH_ACORN
@@ -742,6 +746,7 @@ config ARCH_OMAP
         select ARCH_HAS_CPUFREQ
         select GENERIC_TIME
         select GENERIC_CLOCKEVENTS
+        select ARCH_HAS_HOLES_MEMORYMODEL
         help
           Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -769,14 +774,26 @@ config ARCH_U8500
 
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -791,16 +808,26 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -810,9 +837,14 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
 
-source "arch/arm/mach-dove/Kconfig"
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
@@ -835,48 +867,23 @@ source "arch/arm/mach-s5p6440/Kconfig"
 
 source "arch/arm/mach-s5p6442/Kconfig"
 
-source "arch/arm/plat-stmp3xxx/Kconfig"
-
 if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
 source "arch/arm/mach-s5pv210/Kconfig"
 
-source "arch/arm/mach-lh7a40x/Kconfig"
-
-source "arch/arm/mach-h720x/Kconfig"
-
-source "arch/arm/mach-versatile/Kconfig"
-
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
+source "arch/arm/mach-shmobile/Kconfig"
 
-source "arch/arm/mach-nomadik/Kconfig"
-source "arch/arm/plat-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
+source "arch/arm/plat-stmp3xxx/Kconfig"
 
 source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
+source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-ux500/Kconfig"
+source "arch/arm/mach-w90x900/Kconfig"
 
 # Definitions to make life easier
 config ARCH_ACORN
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 27032222b86..2dca13f6016 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@ CFLAGS_ABI	+=-funwind-tables
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT   :=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT   :=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN   :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2   :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2   :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@@ -146,6 +146,8 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)              := mx2
 machine-$(CONFIG_ARCH_MX25)             := mx25
 machine-$(CONFIG_ARCH_MX3)              := mx3
+machine-$(CONFIG_ARCH_MX5)              := mx5
+machine-$(CONFIG_ARCH_MXC91231)         := mxc91231
 machine-$(CONFIG_ARCH_NETX)             := netx
 machine-$(CONFIG_ARCH_NOMADIK)          := nomadik
 machine-$(CONFIG_ARCH_NS9XXX)           := ns9xxx
@@ -167,6 +169,7 @@ machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)          := s5pv210
 machine-$(CONFIG_ARCH_SA1100)           := sa1100
 machine-$(CONFIG_ARCH_SHARK)            := shark
+machine-$(CONFIG_ARCH_SHMOBILE)         := shmobile
 machine-$(CONFIG_ARCH_STMP378X)         := stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)         := stmp37xx
 machine-$(CONFIG_ARCH_U300)             := u300
@@ -174,21 +177,20 @@ machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)        := versatile
 machine-$(CONFIG_ARCH_W90X900)          := w90x900
 machine-$(CONFIG_FOOTBRIDGE)            := footbridge
-machine-$(CONFIG_ARCH_MXC91231)         := mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)         := mxc
 plat-$(CONFIG_ARCH_OMAP)        := omap
+plat-$(CONFIG_ARCH_S3C64XX)     := samsung
+plat-$(CONFIG_ARCH_STMP3XXX)    := stmp3xxx
 plat-$(CONFIG_PLAT_IOP)         := iop
 plat-$(CONFIG_PLAT_NOMADIK)     := nomadik
 plat-$(CONFIG_PLAT_ORION)       := orion
 plat-$(CONFIG_PLAT_PXA)         := pxa
 plat-$(CONFIG_PLAT_S3C24XX)     := s3c24xx samsung
-plat-$(CONFIG_ARCH_S3C64XX)     := samsung
 plat-$(CONFIG_PLAT_S5PC1XX)     := s5pc1xx samsung
 plat-$(CONFIG_PLAT_S5P)         := s5p samsung
-plat-$(CONFIG_ARCH_STMP3XXX)    := stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index d356af7cef8..4fddc509e78 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,14 @@
                 .macro  writeb, ch, rb
                 mcr     p14, 0, \ch, c0, c5, 0
                 .endm
+#elif defined(CONFIG_CPU_V7)
+                .macro  loadsp, rb
+                .endm
+                .macro  writeb, ch, rb
+wait:           mrc     p14, 0, pc, c0, c1, 0
+                bcs     wait
+                mcr     p14, 0, \ch, c0, c5, 0
+                .endm
 #elif defined(CONFIG_CPU_XSCALE)
                 .macro  loadsp, rb
                 .endm
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 7e0fe4d42c7..56a0d116d27 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -53,6 +53,18 @@ static void icedcc_putc(int ch)
 
         asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+        asm(
+        "wait:  mrc     p14, 0, pc, c0, c1, 0                   \n\
+                bcs     wait                                    \n\
+                mcr     p14, 0, %0, c0, c5, 0                   "
+        : : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -88,7 +100,6 @@ static void icedcc_putc(int ch)
 #endif
 
 #define putc(ch)        icedcc_putc(ch)
-#define flush() do { } while (0)
 #endif
 
 static void putstr(const char *ptr)
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index bd36c778c81..90ae00b631c 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -32,6 +32,12 @@
 
 #include <asm/hardware/locomo.h>
 
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY          (0)
+#define IRQ_LOCOMO_GPIO         (1)
+#define IRQ_LOCOMO_LT           (2)
+#define IRQ_LOCOMO_SPI          (3)
+
 /* M62332 output channel selection */
 #define M62332_EVR_CH   1       /* M62332 volume channel number  */
                                 /*   0 : CH.1 , 1 : CH. 2        */
@@ -58,6 +64,7 @@ struct locomo {
         struct device *dev;
         unsigned long phys;
         unsigned int irq;
+        int irq_base;
         spinlock_t lock;
         void __iomem *base;
 #ifdef CONFIG_PM
@@ -81,9 +88,7 @@ struct locomo_dev_info {
 static struct locomo_dev_info locomo_devices[] = {
         {
                 .devid          = LOCOMO_DEVID_KEYBOARD,
-                .irq = {
-                        IRQ_LOCOMO_KEY,
-                },
+                .irq            = { IRQ_LOCOMO_KEY },
                 .name           = "locomo-keyboard",
                 .offset         = LOCOMO_KEYBOARD,
                 .length         = 16,
@@ -133,53 +138,20 @@ static struct locomo_dev_info locomo_devices[] = {
         },
 };
 
-
-/** LoCoMo interrupt handling stuff.
- * NOTE: LoCoMo has a 1 to many mapping on all of its IRQs.
- * that is, there is only one real hardware interrupt
- * we determine which interrupt it is by reading some IO memory.
- * We have two levels of expansion, first in the handler for the
- * hardware interrupt we generate an interrupt
- * IRQ_LOCOMO_*_BASE and those handlers generate more interrupts
- *
- * hardware irq reads LOCOMO_ICR & 0x0f00
- *   IRQ_LOCOMO_KEY_BASE
- *   IRQ_LOCOMO_GPIO_BASE
- *   IRQ_LOCOMO_LT_BASE
- *   IRQ_LOCOMO_SPI_BASE
- * IRQ_LOCOMO_KEY_BASE reads LOCOMO_KIC & 0x0001
- *   IRQ_LOCOMO_KEY
- * IRQ_LOCOMO_GPIO_BASE reads LOCOMO_GIR & LOCOMO_GPD & 0xffff
- *   IRQ_LOCOMO_GPIO[0-15]
- * IRQ_LOCOMO_LT_BASE reads LOCOMO_LTINT & 0x0001
- *   IRQ_LOCOMO_LT
- * IRQ_LOCOMO_SPI_BASE reads LOCOMO_SPIIR & 0x000F
- *   IRQ_LOCOMO_SPI_RFR
- *   IRQ_LOCOMO_SPI_RFW
- *   IRQ_LOCOMO_SPI_OVRN
- *   IRQ_LOCOMO_SPI_TEND
- */
-
-#define LOCOMO_IRQ_START        (IRQ_LOCOMO_KEY_BASE)
-#define LOCOMO_IRQ_KEY_START    (IRQ_LOCOMO_KEY)
-#define LOCOMO_IRQ_GPIO_START   (IRQ_LOCOMO_GPIO0)
-#define LOCOMO_IRQ_LT_START     (IRQ_LOCOMO_LT)
-#define LOCOMO_IRQ_SPI_START    (IRQ_LOCOMO_SPI_RFR)
-
 static void locomo_handler(unsigned int irq, struct irq_desc *desc)
 {
+        struct locomo *lchip = get_irq_chip_data(irq);
         int req, i;
-        void __iomem *mapbase = get_irq_chip_data(irq);
 
         /* Acknowledge the parent IRQ */
         desc->chip->ack(irq);
 
         /* check why this interrupt was generated */
-        req = locomo_readl(mapbase + LOCOMO_ICR) & 0x0f00;
+        req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
 
         if (req) {
                 /* generate the next interrupt(s) */
-                irq = LOCOMO_IRQ_START;
+                irq = lchip->irq_base;
                 for (i = 0; i <= 3; i++, irq++) {
                         if (req & (0x0100 << i)) {
                                 generic_handle_irq(irq);
@@ -195,20 +167,20 @@ static void locomo_ack_irq(unsigned int irq)
 
 static void locomo_mask_irq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct locomo *lchip = get_irq_chip_data(irq);
         unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_ICR);
-        r &= ~(0x0010 << (irq - LOCOMO_IRQ_START));
-        locomo_writel(r, mapbase + LOCOMO_ICR);
+        r = locomo_readl(lchip->base + LOCOMO_ICR);
+        r &= ~(0x0010 << (irq - lchip->irq_base));
+        locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static void locomo_unmask_irq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct locomo *lchip = get_irq_chip_data(irq);
         unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_ICR);
-        r |= (0x0010 << (irq - LOCOMO_IRQ_START));
-        locomo_writel(r, mapbase + LOCOMO_ICR);
+        r = locomo_readl(lchip->base + LOCOMO_ICR);
+        r |= (0x0010 << (irq - lchip->irq_base));
+        locomo_writel(r, lchip->base + LOCOMO_ICR);
 }
 
 static struct irq_chip locomo_chip = {
@@ -218,297 +190,22 @@ static struct irq_chip locomo_chip = {
         .unmask = locomo_unmask_irq,
 };
 
-static void locomo_key_handler(unsigned int irq, struct irq_desc *desc)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-
-        if (locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC) & 0x0001) {
-                generic_handle_irq(LOCOMO_IRQ_KEY_START);
-        }
-}
-
-static void locomo_key_ack_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-        r &= ~(0x0100 << (irq - LOCOMO_IRQ_KEY_START));
-        locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_mask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-        r &= ~(0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-        locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static void locomo_key_unmask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-        r |= (0x0010 << (irq - LOCOMO_IRQ_KEY_START));
-        locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
-}
-
-static struct irq_chip locomo_key_chip = {
-        .name   = "LOCOMO-key",
-        .ack    = locomo_key_ack_irq,
-        .mask   = locomo_key_mask_irq,
-        .unmask = locomo_key_unmask_irq,
-};
-
-static void locomo_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
-        int req, i;
-        void __iomem *mapbase = get_irq_chip_data(irq);
-
-        req =   locomo_readl(mapbase + LOCOMO_GIR) &
-                locomo_readl(mapbase + LOCOMO_GPD) &
-                0xffff;
-
-        if (req) {
-                irq = LOCOMO_IRQ_GPIO_START;
-                for (i = 0; i <= 15; i++, irq++) {
-                        if (req & (0x0001 << i)) {
-                                generic_handle_irq(irq);
-                        }
-                }
-        }
-}
-
-static void locomo_gpio_ack_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_GWE);
-        r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-        locomo_writel(r, mapbase + LOCOMO_GWE);
-
-        r = locomo_readl(mapbase + LOCOMO_GIS);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-        locomo_writel(r, mapbase + LOCOMO_GIS);
-
-        r = locomo_readl(mapbase + LOCOMO_GWE);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-        locomo_writel(r, mapbase + LOCOMO_GWE);
-}
-
-static void locomo_gpio_mask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_GIE);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-        locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static void locomo_gpio_unmask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_GIE);
-        r |= (0x0001 << (irq - LOCOMO_IRQ_GPIO_START));
-        locomo_writel(r, mapbase + LOCOMO_GIE);
-}
-
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-
-static int locomo_gpio_type(unsigned int irq, unsigned int type)
-{
-        unsigned int mask;
-        void __iomem *mapbase = get_irq_chip_data(irq);
-
-        mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
-
-        if (type == IRQ_TYPE_PROBE) {
-                if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-                        return 0;
-                type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-        }
-
-        if (type & IRQ_TYPE_EDGE_RISING)
-                GPIO_IRQ_rising_edge |= mask;
-        else
-                GPIO_IRQ_rising_edge &= ~mask;
-        if (type & IRQ_TYPE_EDGE_FALLING)
-                GPIO_IRQ_falling_edge |= mask;
-        else
-                GPIO_IRQ_falling_edge &= ~mask;
-        locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
-        locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
-
-        return 0;
-}
-
-static struct irq_chip locomo_gpio_chip = {
-        .name     = "LOCOMO-gpio",
-        .ack      = locomo_gpio_ack_irq,
-        .mask     = locomo_gpio_mask_irq,
-        .unmask   = locomo_gpio_unmask_irq,
-        .set_type = locomo_gpio_type,
-};
-
-static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-
-        if (locomo_readl(mapbase + LOCOMO_LTINT) & 0x0001) {
-                generic_handle_irq(LOCOMO_IRQ_LT_START);
-        }
-}
-
-static void locomo_lt_ack_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_LTINT);
-        r &= ~(0x0100 << (irq - LOCOMO_IRQ_LT_START));
-        locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_mask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_LTINT);
-        r &= ~(0x0010 << (irq - LOCOMO_IRQ_LT_START));
-        locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static void locomo_lt_unmask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_LTINT);
-        r |= (0x0010 << (irq - LOCOMO_IRQ_LT_START));
-        locomo_writel(r, mapbase + LOCOMO_LTINT);
-}
-
-static struct irq_chip locomo_lt_chip = {
-        .name   = "LOCOMO-lt",
-        .ack    = locomo_lt_ack_irq,
-        .mask   = locomo_lt_mask_irq,
-        .unmask = locomo_lt_unmask_irq,
-};
-
-static void locomo_spi_handler(unsigned int irq, struct irq_desc *desc)
-{
-        int req, i;
-        void __iomem *mapbase = get_irq_chip_data(irq);
-
-        req = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIR) & 0x000F;
-        if (req) {
-                irq = LOCOMO_IRQ_SPI_START;
-
-                for (i = 0; i <= 3; i++, irq++) {
-                        if (req & (0x0001 << i)) {
-                                generic_handle_irq(irq);
-                        }
-                }
-        }
-}
-
-static void locomo_spi_ack_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-        r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-        locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-
-        r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-        locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIS);
-
-        r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-        locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIWE);
-}
-
-static void locomo_spi_mask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-        r &= ~(0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-        locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static void locomo_spi_unmask_irq(unsigned int irq)
-{
-        void __iomem *mapbase = get_irq_chip_data(irq);
-        unsigned int r;
-        r = locomo_readl(mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-        r |= (0x0001 << (irq - LOCOMO_IRQ_SPI_START));
-        locomo_writel(r, mapbase + LOCOMO_SPI + LOCOMO_SPIIE);
-}
-
-static struct irq_chip locomo_spi_chip = {
-        .name   = "LOCOMO-spi",
-        .ack    = locomo_spi_ack_irq,
-        .mask   = locomo_spi_mask_irq,
-        .unmask = locomo_spi_unmask_irq,
-};
-
 static void locomo_setup_irq(struct locomo *lchip)
 {
-        int irq;
-        void __iomem *irqbase = lchip->base;
+        int irq = lchip->irq_base;
 
         /*
          * Install handler for IRQ_LOCOMO_HW.
          */
         set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
-        set_irq_chip_data(lchip->irq, irqbase);
+        set_irq_chip_data(lchip->irq, lchip);
         set_irq_chained_handler(lchip->irq, locomo_handler);
 
-        /* Install handlers for IRQ_LOCOMO_*_BASE */
-        set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
-        set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
-        set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
-
-        set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
-        set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
-        set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
-
-        set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
-        set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
-        set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
-
-        set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
-        set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
-        set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
-
-        /* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
-        set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
-        set_irq_chip_data(LOCOMO_IRQ_KEY_START, irqbase);
-        set_irq_handler(LOCOMO_IRQ_KEY_START, handle_edge_irq);
-        set_irq_flags(LOCOMO_IRQ_KEY_START, IRQF_VALID | IRQF_PROBE);
-
-        /* install handlers for IRQ_LOCOMO_GPIO_BASE generated interrupts */
-        for (irq = LOCOMO_IRQ_GPIO_START; irq < LOCOMO_IRQ_GPIO_START + 16; irq++) {
-                set_irq_chip(irq, &locomo_gpio_chip);
-                set_irq_chip_data(irq, irqbase);
-                set_irq_handler(irq, handle_edge_irq);
-                set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-        }
-
-        /* install handlers for IRQ_LOCOMO_LT_BASE generated interrupts */
-        set_irq_chip(LOCOMO_IRQ_LT_START, &locomo_lt_chip);
-        set_irq_chip_data(LOCOMO_IRQ_LT_START, irqbase);
-        set_irq_handler(LOCOMO_IRQ_LT_START, handle_edge_irq);
-        set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
-
-        /* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
-        for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
-                set_irq_chip(irq, &locomo_spi_chip);
-                set_irq_chip_data(irq, irqbase);
-                set_irq_handler(irq, handle_edge_irq);
+        /* Install handlers for IRQ_LOCOMO_* */
+        for ( ; irq <= lchip->irq_base + 3; irq++) {
+                set_irq_chip(irq, &locomo_chip);
+                set_irq_chip_data(irq, lchip);
+                set_irq_handler(irq, handle_level_irq);
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
 }
@@ -555,7 +252,8 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
                 dev->mapbase = 0;
         dev->length = info->length;
 
-        memmove(dev->irq, info->irq, sizeof(dev->irq));
+        dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+                        NO_IRQ : lchip->irq_base + info->irq[0];
 
         ret = device_register(&dev->dev);
         if (ret) {
@@ -672,6 +370,7 @@ static int locomo_resume(struct platform_device *dev)
 static int
 __locomo_probe(struct device *me, struct resource *mem, int irq)
 {
+        struct locomo_platform_data *pdata = me->platform_data;
         struct locomo *lchip;
         unsigned long r;
         int i, ret = -ENODEV;
@@ -687,6 +386,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
         lchip->phys = mem->start;
         lchip->irq = irq;
+        lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
 
         /*
          * Map the whole region.  This also maps the
@@ -753,7 +453,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
          * The interrupt controller must be initialised before any
          * other device to ensure that the interrupts are available.
          */
-        if (lchip->irq != NO_IRQ)
+        if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
                 locomo_setup_irq(lchip);
 
         for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 8ba7044c554..a52a27c1d9b 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -35,6 +35,58 @@
 
 #include <asm/hardware/sa1111.h>
 
+/* SA1111 IRQs */
+#define IRQ_GPAIN0              (0)
+#define IRQ_GPAIN1              (1)
+#define IRQ_GPAIN2              (2)
+#define IRQ_GPAIN3              (3)
+#define IRQ_GPBIN0              (4)
+#define IRQ_GPBIN1              (5)
+#define IRQ_GPBIN2              (6)
+#define IRQ_GPBIN3              (7)
+#define IRQ_GPBIN4              (8)
+#define IRQ_GPBIN5              (9)
+#define IRQ_GPCIN0              (10)
+#define IRQ_GPCIN1              (11)
+#define IRQ_GPCIN2              (12)
+#define IRQ_GPCIN3              (13)
+#define IRQ_GPCIN4              (14)
+#define IRQ_GPCIN5              (15)
+#define IRQ_GPCIN6              (16)
+#define IRQ_GPCIN7              (17)
+#define IRQ_MSTXINT             (18)
+#define IRQ_MSRXINT             (19)
+#define IRQ_MSSTOPERRINT        (20)
+#define IRQ_TPTXINT             (21)
+#define IRQ_TPRXINT             (22)
+#define IRQ_TPSTOPERRINT        (23)
+#define SSPXMTINT               (24)
+#define SSPRCVINT               (25)
+#define SSPROR                  (26)
+#define AUDXMTDMADONEA          (32)
+#define AUDRCVDMADONEA          (33)
+#define AUDXMTDMADONEB          (34)
+#define AUDRCVDMADONEB          (35)
+#define AUDTFSR                 (36)
+#define AUDRFSR                 (37)
+#define AUDTUR                  (38)
+#define AUDROR                  (39)
+#define AUDDTS                  (40)
+#define AUDRDD                  (41)
+#define AUDSTO                  (42)
+#define IRQ_USBPWR              (43)
+#define IRQ_HCIM                (44)
+#define IRQ_HCIBUFFACC          (45)
+#define IRQ_HCIRMTWKP           (46)
+#define IRQ_NHCIMFCIR           (47)
+#define IRQ_USB_PORT_RESUME     (48)
+#define IRQ_S0_READY_NINT       (49)
+#define IRQ_S1_READY_NINT       (50)
+#define IRQ_S0_CD_VALID         (51)
+#define IRQ_S1_CD_VALID         (52)
+#define IRQ_S0_BVD1_STSCHG      (53)
+#define IRQ_S1_BVD1_STSCHG      (54)
+
 extern void __init sa1110_mb_enable(void);
 
 /*
@@ -49,6 +101,7 @@ struct sa1111 {
         struct clk      *clk;
         unsigned long   phys;
         int             irq;
+        int             irq_base;       /* base for cascaded on-chip IRQs */
         spinlock_t      lock;
         void __iomem    *base;
 #ifdef CONFIG_PM
@@ -152,36 +205,37 @@ static void
 sa1111_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
         unsigned int stat0, stat1, i;
-        void __iomem *base = get_irq_data(irq);
+        struct sa1111 *sachip = get_irq_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
 
-        stat0 = sa1111_readl(base + SA1111_INTSTATCLR0);
-        stat1 = sa1111_readl(base + SA1111_INTSTATCLR1);
+        stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
+        stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
 
-        sa1111_writel(stat0, base + SA1111_INTSTATCLR0);
+        sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
 
         desc->chip->ack(irq);
 
-        sa1111_writel(stat1, base + SA1111_INTSTATCLR1);
+        sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
 
         if (stat0 == 0 && stat1 == 0) {
                 do_bad_IRQ(irq, desc);
                 return;
         }
 
-        for (i = IRQ_SA1111_START; stat0; i++, stat0 >>= 1)
+        for (i = 0; stat0; i++, stat0 >>= 1)
                 if (stat0 & 1)
-                        handle_edge_irq(i, irq_desc + i);
+                        generic_handle_irq(i + sachip->irq_base);
 
-        for (i = IRQ_SA1111_START + 32; stat1; i++, stat1 >>= 1)
+        for (i = 32; stat1; i++, stat1 >>= 1)
                 if (stat1 & 1)
-                        handle_edge_irq(i, irq_desc + i);
+                        generic_handle_irq(i + sachip->irq_base);
 
         /* For level-based interrupts */
         desc->chip->unmask(irq);
 }
 
-#define SA1111_IRQMASK_LO(x)    (1 << (x - IRQ_SA1111_START))
-#define SA1111_IRQMASK_HI(x)    (1 << (x - IRQ_SA1111_START - 32))
+#define SA1111_IRQMASK_LO(x)    (1 << (x - sachip->irq_base))
+#define SA1111_IRQMASK_HI(x)    (1 << (x - sachip->irq_base - 32))
 
 static void sa1111_ack_irq(unsigned int irq)
 {
@@ -189,7 +243,8 @@ static void sa1111_ack_irq(unsigned int irq)
 
 static void sa1111_mask_lowirq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned long ie0;
 
         ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -199,7 +254,8 @@ static void sa1111_mask_lowirq(unsigned int irq)
 
 static void sa1111_unmask_lowirq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned long ie0;
 
         ie0 = sa1111_readl(mapbase + SA1111_INTEN0);
@@ -216,8 +272,9 @@ static void sa1111_unmask_lowirq(unsigned int irq)
  */
 static int sa1111_retrigger_lowirq(unsigned int irq)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_LO(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip0;
         int i;
 
@@ -237,8 +294,9 @@ static int sa1111_retrigger_lowirq(unsigned int irq)
 
 static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_LO(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip0;
 
         if (flags == IRQ_TYPE_PROBE)
@@ -260,8 +318,9 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_LO(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long we0;
 
         we0 = sa1111_readl(mapbase + SA1111_WAKEEN0);
@@ -286,7 +345,8 @@ static struct irq_chip sa1111_low_chip = {
 
 static void sa1111_mask_highirq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned long ie1;
 
         ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -296,7 +356,8 @@ static void sa1111_mask_highirq(unsigned int irq)
 
 static void sa1111_unmask_highirq(unsigned int irq)
 {
-        void __iomem *mapbase = get_irq_chip_data(irq);
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned long ie1;
 
         ie1 = sa1111_readl(mapbase + SA1111_INTEN1);
@@ -313,8 +374,9 @@ static void sa1111_unmask_highirq(unsigned int irq)
  */
 static int sa1111_retrigger_highirq(unsigned int irq)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_HI(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip1;
         int i;
 
@@ -334,8 +396,9 @@ static int sa1111_retrigger_highirq(unsigned int irq)
 
 static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_HI(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long ip1;
 
         if (flags == IRQ_TYPE_PROBE)
@@ -357,8 +420,9 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 
 static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
 {
+        struct sa1111 *sachip = get_irq_chip_data(irq);
+        void __iomem *mapbase = sachip->base + SA1111_INTC;
         unsigned int mask = SA1111_IRQMASK_HI(irq);
-        void __iomem *mapbase = get_irq_chip_data(irq);
         unsigned long we1;
 
         we1 = sa1111_readl(mapbase + SA1111_WAKEEN1);
@@ -412,14 +476,14 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 
         for (irq = IRQ_GPAIN0; irq <= SSPROR; irq++) {
                 set_irq_chip(irq, &sa1111_low_chip);
-                set_irq_chip_data(irq, irqbase);
+                set_irq_chip_data(irq, sachip);
                 set_irq_handler(irq, handle_edge_irq);
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
 
         for (irq = AUDXMTDMADONEA; irq <= IRQ_S1_BVD1_STSCHG; irq++) {
                 set_irq_chip(irq, &sa1111_high_chip);
-                set_irq_chip_data(irq, irqbase);
+                set_irq_chip_data(irq, sachip);
                 set_irq_handler(irq, handle_edge_irq);
                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
         }
@@ -428,7 +492,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
          * Register SA1111 interrupt
          */
         set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
-        set_irq_data(sachip->irq, irqbase);
+        set_irq_data(sachip->irq, sachip);
         set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
 
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 37bda5f3dde..9012004321d 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -140,6 +140,7 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+#ifdef CONFIG_PM
 static void check_scoop_reg(struct scoop_dev *sdev)
 {
         unsigned short mcr;
@@ -149,7 +150,6 @@ static void check_scoop_reg(struct scoop_dev *sdev)
                 iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
-#ifdef CONFIG_PM
 static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 {
         struct scoop_dev *sdev = platform_get_drvdata(dev);
diff --git a/arch/arm/configs/ap4evb_defconfig b/arch/arm/configs/ap4evb_defconfig
new file mode 100644
index 00000000000..e14229be767
--- /dev/null
+++ b/arch/arm/configs/ap4evb_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:25:36 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+# CONFIG_ARCH_SH7377 is not set
+CONFIG_ARCH_SH7372=y
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_AP4EVB=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x10000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g3evm_defconfig b/arch/arm/configs/g3evm_defconfig
new file mode 100644
index 00000000000..3c19031961d
--- /dev/null
+++ b/arch/arm/configs/g3evm_defconfig
@@ -0,0 +1,774 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:20:01 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+CONFIG_ARCH_SH7367=y
+# CONFIG_ARCH_SH7377 is not set
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G3EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x50000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC1,115200 earlyprintk=sh-sci.1,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/g4evm_defconfig b/arch/arm/configs/g4evm_defconfig
new file mode 100644
index 00000000000..8ee79a53713
--- /dev/null
+++ b/arch/arm/configs/g4evm_defconfig
@@ -0,0 +1,779 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc7
+# Mon Feb  8 12:21:35 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_RD_LZO=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+CONFIG_ARCH_SHMOBILE=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# SH-Mobile System Type
+#
+# CONFIG_ARCH_SH7367 is not set
+CONFIG_ARCH_SH7377=y
+# CONFIG_ARCH_SH7372 is not set
+
+#
+# SH-Mobile Board Type
+#
+CONFIG_MACH_G4EVM=y
+
+#
+# SH-Mobile System Configuration
+#
+
+#
+# Memory configuration
+#
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x08000000
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TIMER_CMT=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttySC4,115200 earlyprintk=sh-sci.4,115200"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DECOMPRESS_LZO=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
new file mode 100644
index 00000000000..95d2becfc66
--- /dev/null
+++ b/arch/arm/configs/imote2_defconfig
@@ -0,0 +1,2077 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc8
+# Sat Feb 13 21:48:53 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_SLOW_WORK_DEBUG is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_ARCOM_ZEUS is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+CONFIG_MACH_INTELMOTE2=y
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_STP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+CONFIG_IEEE802154=y
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_BT_ATH3K is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_OTP=y
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_DRBD is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_IEEE802154_DRIVERS=y
+# CONFIG_IEEE802154_FAKEHARD is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_DA9030 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+CONFIG_IR_CORE=y
+CONFIG_VIDEO_IR=y
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_MEDIA_TUNER_MAX2165=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=y
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9T112 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_RJ54N1 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+# CONFIG_SOC_CAMERA_OV9640 is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
+# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+# CONFIG_BACKLIGHT_DA903X is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+# CONFIG_SND_PXA2XX_SOC_IMOTE2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 5fc44c94b0a..4611d3ce451 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:31:18 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:08:54 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -127,14 +134,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -163,6 +197,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -185,6 +220,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Marvell Kirkwood Implementations
@@ -195,7 +231,11 @@ CONFIG_MACH_RD88F6281=y
 CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
+CONFIG_MACH_TS41X=y
+CONFIG_MACH_OPENRD=y
 CONFIG_MACH_OPENRD_BASE=y
+CONFIG_MACH_OPENRD_CLIENT=y
+CONFIG_MACH_NETSPACE_V2=y
 CONFIG_PLAT_ORION=y
 
 #
@@ -262,12 +302,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -398,15 +436,18 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
 CONFIG_CFG80211=y
 # CONFIG_NL80211_TESTMODE is not set
 # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
 CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_CFG80211_DEBUGFS is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
 # CONFIG_LIB80211_DEBUG is not set
@@ -556,6 +597,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -606,7 +651,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -642,6 +689,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -696,15 +744,16 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_SCH is not set
@@ -720,7 +769,7 @@ CONFIG_SATA_MV=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -828,13 +877,6 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-# CONFIG_LIBERTAS_USB is not set
-CONFIG_LIBERTAS_SDIO=y
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_ATMEL is not set
 # CONFIG_AT76C50X_USB is not set
@@ -846,19 +888,24 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_MWL8K is not set
-# CONFIG_P54_COMMON is not set
 # CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
 # CONFIG_IWLWIFI is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
+# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_HERMES is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
 # CONFIG_WL12XX is not set
-# CONFIG_IWM is not set
+# CONFIG_ZD1211RW is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -881,6 +928,7 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -890,6 +938,7 @@ CONFIG_LIBERTAS_SDIO=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -933,6 +982,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -1019,11 +1069,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1032,7 +1077,6 @@ CONFIG_I2C_MV64XXX=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1048,6 +1092,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_ORION=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -1074,10 +1120,12 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1116,6 +1164,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -1123,6 +1172,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1305,6 +1356,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
@@ -1344,6 +1396,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1388,6 +1441,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1417,7 +1471,9 @@ CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1684,7 +1740,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1692,7 +1750,11 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig
new file mode 100644
index 00000000000..03f76cfc941
--- /dev/null
+++ b/arch/arm/configs/mmp2_defconfig
@@ -0,0 +1,1194 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Tue Jan  5 13:55:22 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_MACH_TAVOREVB is not set
+
+#
+# Marvell PXA168/910/MMP2 Implmentations
+#
+# CONFIG_MACH_ASPENITE is not set
+# CONFIG_MACH_ZYLONITE2 is not set
+# CONFIG_MACH_TTC_DKB is not set
+CONFIG_MACH_FLINT=y
+CONFIG_CPU_MMP2=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M user_debug=255"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_PXA3xx is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_BLK_DEV is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_MFD_88PM8607=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_REGULATOR_88PM8607=y
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_EXT4_USE_FOR_EXT23=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 6afa2c108ea..da4710dd1da 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -176,6 +176,7 @@ CONFIG_ARCH_MV78XX0=y
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
+CONFIG_MACH_TERASTATION_WXL=y
 CONFIG_PLAT_ORION=y
 
 #
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
deleted file mode 100644
index 3cabbb6d927..00000000000
--- a/arch/arm/configs/mx1ads_defconfig
+++ /dev/null
@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index edfdd6faf80..b4c1366e9e0 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
new file mode 100644
index 00000000000..c88e9527a8e
--- /dev/null
+++ b/arch/arm/configs/mx51_defconfig
@@ -0,0 +1,1286 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Tue Feb  2 15:20:48 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
+# CONFIG_ARCH_MX3 is not set
+# CONFIG_ARCH_MXC91231 is not set
+CONFIG_ARCH_MX5=y
+CONFIG_ARCH_MX51=y
+
+#
+# MX5 platforms:
+#
+CONFIG_MACH_MX51_BABBAGE=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_TZIC=y
+# CONFIG_MXC_PWM is not set
+CONFIG_ARCH_MXC_IOMUX_V3=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_QSEMI_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_ICPLUS_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_STE10XP=y
+CONFIG_LSI_ET1011C_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+CONFIG_MOUSE_PS2_ELANTECH=y
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=m
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_IMX is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_MXC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_MXC is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_SECURITYFS=y
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_RATIONAL=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 85b05d3e279..ee1ebd8dfa8 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Sat Nov  7 20:52:21 2009
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb  4 23:30:00 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -32,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,6 +51,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -122,14 +129,41 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -158,6 +192,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -180,6 +215,7 @@ CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # Orion Implementations
@@ -192,6 +228,7 @@ CONFIG_MACH_TS209=y
 CONFIG_MACH_TERASTATION_PRO2=y
 CONFIG_MACH_LINKSTATION_PRO=y
 CONFIG_MACH_LINKSTATION_MINI=y
+CONFIG_MACH_LINKSTATION_LS_HGL=y
 CONFIG_MACH_TS409=y
 CONFIG_MACH_WRT350N_V2=y
 CONFIG_MACH_TS78XX=y
@@ -268,12 +305,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
@@ -412,10 +447,6 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_CFG80211_DEFAULT_PS_VALUE=0
-# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
 
 #
@@ -554,6 +585,10 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -562,6 +597,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_PHANTOM is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
@@ -569,6 +605,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -621,7 +658,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BE2ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
 # CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
@@ -657,6 +696,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_BFA_FC is not set
 # CONFIG_SCSI_DH is not set
@@ -711,15 +751,16 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
@@ -736,7 +777,7 @@ CONFIG_SATA_MV=y
 #
 
 #
-# See the help texts for more information.
+# The newer stack is recommended.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -842,8 +883,10 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -866,6 +909,7 @@ CONFIG_WLAN=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
 # CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
@@ -875,6 +919,7 @@ CONFIG_WLAN=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -993,11 +1038,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_TINY_USB is not set
 
 #
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
 # Other I2C/SMBus bus drivers
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
@@ -1006,7 +1046,6 @@ CONFIG_I2C_MV64XXX=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -1033,10 +1072,12 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_ADP5588 is not set
 
 #
 # PCI GPIO expanders:
 #
+# CONFIG_GPIO_CS5535 is not set
 # CONFIG_GPIO_BT8XX is not set
 # CONFIG_GPIO_LANGWELL is not set
 
@@ -1079,6 +1120,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM73 is not set
 CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -1104,6 +1146,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_AMC6821 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_TMP421 is not set
@@ -1118,6 +1161,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_I2C is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
@@ -1140,11 +1184,13 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_MFD_88PM8607 is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -1316,6 +1362,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_USB_ULPI is not set
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
@@ -1332,6 +1379,7 @@ CONFIG_LEDS_GPIO_PLATFORM=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -1377,6 +1425,7 @@ CONFIG_RTC_DRV_PCF8563=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 CONFIG_RTC_DRV_S35390A=y
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1398,7 +1447,9 @@ CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_M48T86=y
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1686,7 +1737,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1694,7 +1747,11 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index 791b8c39aef..113511f91eb 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Mar 20 13:43:13 2009
+# Linux kernel version: 2.6.33-rc3
+# Tue Jan 12 08:57:10 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,6 +32,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,11 +49,13 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -64,10 +69,10 @@ CONFIG_NAMESPACES=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -78,17 +83,20 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -98,6 +106,11 @@ CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -109,8 +122,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -118,31 +130,62 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -150,26 +193,30 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-CONFIG_ARCH_MMP=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 # CONFIG_MACH_TAVOREVB is not set
 
 #
@@ -177,6 +224,7 @@ CONFIG_ARCH_MMP=y
 #
 CONFIG_MACH_ASPENITE=y
 CONFIG_MACH_ZYLONITE2=y
+CONFIG_MACH_AVENGERS_LITE=y
 # CONFIG_MACH_TTC_DKB is not set
 CONFIG_CPU_PXA168=y
 CONFIG_PLAT_PXA=y
@@ -187,7 +235,7 @@ CONFIG_PLAT_PXA=y
 CONFIG_CPU_MOHAWK=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -201,7 +249,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -223,13 +271,15 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -237,12 +287,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,7 +340,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -330,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -343,6 +395,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -355,13 +409,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +428,7 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -412,8 +467,10 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -422,15 +479,12 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN=y
+# CONFIG_HOSTAP is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -442,6 +496,7 @@ CONFIG_SMC91X=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -449,6 +504,7 @@ CONFIG_SMC91X=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -510,6 +566,11 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -530,11 +591,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -555,22 +619,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -595,13 +645,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -613,10 +667,13 @@ CONFIG_RTC_LIB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -627,6 +684,11 @@ CONFIG_INOTIFY_USER=y
 CONFIG_GENERIC_ACL=y
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -673,6 +735,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -681,7 +744,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -706,6 +768,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -714,11 +777,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -738,28 +805,33 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -768,7 +840,9 @@ CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
 # CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -776,13 +850,16 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -791,10 +868,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -822,11 +901,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -863,6 +944,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -870,6 +952,7 @@ CONFIG_CRYPTO_DES=y
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -884,7 +967,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
new file mode 100644
index 00000000000..acb1a8f30e3
--- /dev/null
+++ b/arch/arm/configs/raumfeld_defconfig
@@ -0,0 +1,1898 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 21:57:32 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA320=y
+# CONFIG_CPU_PXA930 is not set
+# CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+CONFIG_MACH_RAUMFELD_RC=y
+CONFIG_MACH_RAUMFELD_CONNECTOR=y
+CONFIG_MACH_RAUMFELD_PROTO=y
+CONFIG_MACH_RAUMFELD_SPEAKER=y
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="console=ttyS0,115200 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REG_DEBUG=y
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_NAND_PXA3xx_BUILTIN is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_ISL29003=y
+CONFIG_TI_DAC7512=y
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+CONFIG_USB_NET_MCS7830=y
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_EETI=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=m
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+CONFIG_W1_MASTER_GPIO=m
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+CONFIG_W1_SLAVE_DS2760=m
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+CONFIG_BATTERY_DS2760=m
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_SENSORS_LIS3_SPI=y
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_MAX8660=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+CONFIG_PXA3XX_GCU=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_RAUMFELD_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_PXA2XX_AC97 is not set
+CONFIG_SND_SPI=y
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+CONFIG_SND_PXA_SOC_SSP=y
+CONFIG_SND_SOC_RAUMFELD=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AK4104=y
+CONFIG_SND_SOC_CS4270=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=m
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+CONFIG_LEDS_LT3593=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+# CONFIG_FSCACHE_HISTOGRAM is not set
+# CONFIG_FSCACHE_DEBUG is not set
+CONFIG_CACHEFILES=y
+# CONFIG_CACHEFILES_DEBUG is not set
+# CONFIG_CACHEFILES_HISTOGRAM is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFS_FSCACHE=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 730aefcfbee..8113bb5fb66 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -42,7 +42,8 @@
 #endif
 
 #if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
-    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+    defined(CONFIG_CPU_ARM1026)
 # define MULTI_CACHE 1
 #endif
 
@@ -154,16 +155,16 @@
  *      Please note that the implementation of these, and the required
  *      effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
- *      flush_cache_kern_all()
+ *      flush_kern_all()
  *
  *              Unconditionally clean and invalidate the entire cache.
  *
- *      flush_cache_user_mm(mm)
+ *      flush_user_all()
  *
  *              Clean and invalidate all user space cache entries
  *              before a change of page tables.
  *
- *      flush_cache_user_range(start, end, flags)
+ *      flush_user_range(start, end, flags)
  *
  *              Clean and invalidate a range of cache entries in the
  *              specified address space before a change of page tables.
@@ -179,6 +180,20 @@
  *              - start  - virtual start address
  *              - end    - virtual end address
  *
+ *      coherent_user_range(start, end)
+ *
+ *              Ensure coherency between the Icache and the Dcache in the
+ *              region described by start, end.  If you have non-snooping
+ *              Harvard caches, you need to implement this function.
+ *              - start  - virtual start address
+ *              - end    - virtual end address
+ *
+ *      flush_kern_dcache_area(kaddr, size)
+ *
+ *              Ensure that the data held in page is written back.
+ *              - kaddr  - page address
+ *              - size   - region size
+ *
  *      DMA Cache Coherency
  *      ===================
  *
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 74b5fff7f57..6700c7fc7eb 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,6 +75,18 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
 /* frequently used interrupts */
 #define IT8152_PCISERR          IT8152_PD_IRQ(14)
 #define IT8152_H2PTADR          IT8152_PD_IRQ(13)
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
index 954b1be991b..74e51d6bd93 100644
--- a/arch/arm/include/asm/hardware/locomo.h
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -214,4 +214,8 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int
 /* Frontlight control */
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
 
+struct locomo_platform_data {
+        int     irq_base;       /* IRQ base for cascaded on-chip IRQs */
+};
+
 #endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
index 5da2595759e..92ed254c175 100644
--- a/arch/arm/include/asm/hardware/sa1111.h
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -578,4 +578,8 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
 
+struct sa1111_platform_data {
+        int     irq_base;       /* base for cascaded on-chip IRQs */
+};
+
 #endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index b121b6053cc..5c91addcaeb 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,26 @@
 1002:
                 .endm
 
+#elif defined(CONFIG_CPU_V7)
+
+                .macro  addruart, rx
+                .endm
+
+                .macro  senduart, rd, rx
+                mcr     p14, 0, \rd, c0, c5, 0
+                .endm
+
+                .macro  busyuart, rd, rx
+busy:           mrc     p14, 0, pc, c0, c1, 0
+                bcs     busy
+                .endm
+
+                .macro  waituart, rd, rx
+wait:           mrc     p14, 0, pc, c0, c1, 0
+                bcs     wait
+
+                .endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
                 .macro  addruart, rx
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 950391f194c..d4a0da1e48f 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
                 return 1;
         if (cpu_architecture() < CPU_ARCH_ARMv6)
                 return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-        /*
-         * If we have support for OABI programs, we can never allow NX
-         * support - our signal syscall restart mechanism relies upon
-         * being able to execute code placed on the user stack.
-         */
-        return 1;
-#else
         return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c6c57b640b6..621acad8ea4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -102,6 +102,7 @@ struct cpu_cache_fns cpu_cache;
 #endif
 #ifdef CONFIG_OUTER_CACHE
 struct outer_cache_fns outer_cache;
+EXPORT_SYMBOL(outer_cache);
 #endif
 
 struct stack {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 309f3511aa2..2500f41d8d2 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -58,6 +58,12 @@ static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
         u32     sr = at91_sys_read(AT91_ST_SR) & irqmask;
 
+        /*
+         * irqs should be disabled here, but as the irq is shared they are only
+         * guaranteed to be off if the timer irq is registered first.
+         */
+        WARN_ON_ONCE(!irqs_disabled());
+
         /* simulate "oneshot" timer with alarm */
         if (sr & AT91_ST_ALMS) {
                 clkevt.event_handler(&clkevt);
@@ -132,24 +138,11 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static int
 clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-        unsigned long   flags;
         u32             alm;
         int             status = 0;
 
         BUG_ON(delta < 2);
 
-        /* Use "raw" primitives so we behave correctly on RT kernels. */
-        raw_local_irq_save(flags);
-
-        /*
-         * According to Thomas Gleixner irqs are already disabled here.  Simply
-         * removing raw_local_irq_save above (and the matching
-         * raw_local_irq_restore) was not accepted.  See
-         * http://thread.gmane.org/gmane.linux.ports.arm.kernel/41174
-         * So for now (2008-11-20) just warn once if irqs were not disabled ...
-         */
-        WARN_ON_ONCE(!raw_irqs_disabled_flags(flags));
-
         /* The alarm IRQ uses absolute time (now+delta), not the relative
          * time (delta) in our calling convention.  Like all clockevents
          * using such "match" hardware, we have a race to defend against.
@@ -169,7 +162,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
         alm += delta;
         at91_sys_write(AT91_ST_RTAR, alm);
 
-        raw_local_irq_restore(flags);
         return status;
 }
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 4bd56aee437..608a63240b6 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -62,16 +62,12 @@ static struct clocksource pit_clk = {
 static void
 pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-        unsigned long   flags;
-
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
-                /* update clocksource counter, then enable the IRQ */
-                raw_local_irq_save(flags);
+                /* update clocksource counter */
                 pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
                 at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
                                 | AT91_PIT_PITIEN);
-                raw_local_irq_restore(flags);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 BUG();
@@ -100,6 +96,11 @@ static struct clock_event_device pit_clkevt = {
  */
 static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 {
+        /*
+         * irqs should be disabled here, but as the irq is shared they are only
+         * guaranteed to be off if the timer irq is registered first.
+         */
+        WARN_ON_ONCE(!irqs_disabled());
 
         /* The PIT interrupt may be disabled, and is shared */
         if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
index b4e21a2976d..7a560e05bda 100644
--- a/arch/arm/mach-davinci/include/mach/keyscan.h
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -29,6 +29,7 @@ enum davinci_matrix_types {
 };
 
 struct davinci_ks_platform_data {
+        int             (*device_enable)(struct device *dev);
         unsigned short  *keymap;
         u32             keymapsize;
         u8              rep:1;
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 806972a68c8..5da2cf402c8 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -605,7 +605,7 @@ static struct platform_device dove_xor00_channel = {
         .dev            = {
                 .dma_mask               = &dove_xor0_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&dove_xor00_data,
+                .platform_data          = &dove_xor00_data,
         },
 };
 
@@ -631,7 +631,7 @@ static struct platform_device dove_xor01_channel = {
         .dev            = {
                 .dma_mask               = &dove_xor0_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&dove_xor01_data,
+                .platform_data          = &dove_xor01_data,
         },
 };
 
@@ -704,7 +704,7 @@ static struct platform_device dove_xor10_channel = {
         .dev            = {
                 .dma_mask               = &dove_xor1_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&dove_xor10_data,
+                .platform_data          = &dove_xor10_data,
         },
 };
 
@@ -730,7 +730,7 @@ static struct platform_device dove_xor11_channel = {
         .dev            = {
                 .dma_mask               = &dove_xor1_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&dove_xor11_data,
+                .platform_data          = &dove_xor11_data,
         },
 };
 
diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c
index e7263854bc7..fe3bd5ac8b1 100644
--- a/arch/arm/mach-gemini/gpio.c
+++ b/arch/arm/mach-gemini/gpio.c
@@ -86,7 +86,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
         unsigned int reg_both, reg_level, reg_type;
 
         reg_type = __raw_readl(base + GPIO_INT_TYPE);
-        reg_level = __raw_readl(base + GPIO_INT_BOTH_EDGE);
+        reg_level = __raw_readl(base + GPIO_INT_LEVEL);
         reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE);
 
         switch (type) {
@@ -117,7 +117,7 @@ static int gpio_set_irq_type(unsigned int irq, unsigned int type)
         }
 
         __raw_writel(reg_type, base + GPIO_INT_TYPE);
-        __raw_writel(reg_level, base + GPIO_INT_BOTH_EDGE);
+        __raw_writel(reg_level, base + GPIO_INT_LEVEL);
         __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
 
         gpio_ack_irq(irq);
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 59c5df7e716..5483f61a806 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -30,7 +30,9 @@ static inline void putc(char c)
         UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index f6c6196a51f..17879a876be 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@ config MACH_SHEEVAPLUG
           Say 'Y' here if you want your kernel to support the
           Marvell SheevaPlug Reference Board.
 
+config MACH_ESATA_SHEEVAPLUG
+        bool "Marvell eSATA SheevaPlug Reference Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell eSATA SheevaPlug Reference Board.
+
 config MACH_TS219
         bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
         help
@@ -46,18 +52,35 @@ config MACH_TS41X
           QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
           devices.
 
+config MACH_OPENRD
+        bool
+
 config MACH_OPENRD_BASE
         bool "Marvell OpenRD Base Board"
+        select MACH_OPENRD
         help
           Say 'Y' here if you want your kernel to support the
           Marvell OpenRD Base Board.
 
+config MACH_OPENRD_CLIENT
+        bool "Marvell OpenRD Client Board"
+        select MACH_OPENRD
+        help
+          Say 'Y' here if you want your kernel to support the
+          Marvell OpenRD Client Board.
+
 config MACH_NETSPACE_V2
         bool "LaCie Network Space v2 NAS Board"
         help
           Say 'Y' here if you want your kernel to support the
           LaCie Network Space v2 NAS.
 
+config MACH_INETSPACE_V2
+        bool "LaCie Internet Space v2 NAS Board"
+        help
+          Say 'Y' here if you want your kernel to support the
+          LaCie Internet Space v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index d4d7f53b0fb..a5530e36ba3 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,9 +5,11 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)            += rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)      += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)           += sheevaplug-setup.o
+obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)     += sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)                += ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)                += ts41x-setup.o tsx1x-common.o
-obj-$(CONFIG_MACH_OPENRD_BASE)          += openrd_base-setup.o
+obj-$(CONFIG_MACH_OPENRD)               += openrd-setup.o
 obj-$(CONFIG_MACH_NETSPACE_V2)          += netspace_v2-setup.o
+obj-$(CONFIG_MACH_INETSPACE_V2)         += netspace_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 242dd077534..f759ca24392 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -656,7 +656,7 @@ static struct platform_device kirkwood_xor00_channel = {
         .dev            = {
                 .dma_mask               = &kirkwood_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&kirkwood_xor00_data,
+                .platform_data          = &kirkwood_xor00_data,
         },
 };
 
@@ -682,7 +682,7 @@ static struct platform_device kirkwood_xor01_channel = {
         .dev            = {
                 .dma_mask               = &kirkwood_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&kirkwood_xor01_data,
+                .platform_data          = &kirkwood_xor01_data,
         },
 };
 
@@ -755,7 +755,7 @@ static struct platform_device kirkwood_xor10_channel = {
         .dev            = {
                 .dma_mask               = &kirkwood_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&kirkwood_xor10_data,
+                .platform_data          = &kirkwood_xor10_data,
         },
 };
 
@@ -781,7 +781,7 @@ static struct platform_device kirkwood_xor11_channel = {
         .dev            = {
                 .dma_mask               = &kirkwood_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&kirkwood_xor11_data,
+                .platform_data          = &kirkwood_xor11_data,
         },
 };
 
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 9a064065beb..3ae158d7268 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -182,8 +182,14 @@ static struct platform_device netspace_v2_gpio_buttons = {
 
 static struct gpio_led netspace_v2_gpio_led_pins[] = {
         {
-                .name   = "ns_v2:red:fail",
-                .gpio   = NETSPACE_V2_GPIO_RED_LED,
+                .name                   = "ns_v2:blue:sata",
+                .default_trigger        = "default-on",
+                .gpio                   = NETSPACE_V2_GPIO_BLUE_LED_CMD,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "ns_v2:red:fail",
+                .gpio                   = NETSPACE_V2_GPIO_RED_LED,
         },
 };
 
@@ -202,30 +208,19 @@ static struct platform_device netspace_v2_gpio_leds = {
 
 static void __init netspace_v2_gpio_leds_init(void)
 {
-        platform_device_register(&netspace_v2_gpio_leds);
+        int err;
 
-        /*
-         * Configure the front blue LED to blink in relation with the SATA
-         * activity.
-         */
-        if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
-                         "SATA blue LED slow") != 0)
-                return;
-        if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
-                goto err_free_1;
-        if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
-                         "SATA blue LED command") != 0)
-                goto err_free_1;
-        if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
-                goto err_free_2;
-
-        return;
-
-err_free_2:
-        gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
-err_free_1:
-        gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
-        pr_err("netspace_v2: failed to configure SATA blue LED\n");
+        /* Configure register slow_led to allow SATA activity LED blinking */
+        err = gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW, "blue LED slow");
+        if (err == 0) {
+                err = gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0);
+                if (err)
+                        gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+        }
+        if (err)
+                pr_err("netspace_v2: failed to configure blue LED slow GPIO\n");
+
+        platform_device_register(&netspace_v2_gpio_leds);
 }
 
 /*****************************************************************************
@@ -314,6 +309,7 @@ static void __init netspace_v2_init(void)
                 pr_err("netspace_v2: failed to configure power-off GPIO\n");
 }
 
+#ifdef CONFIG_MACH_NETSPACE_V2
 MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
         .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
         .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
@@ -323,3 +319,16 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
         .init_irq       = kirkwood_init_irq,
         .timer          = &netspace_v2_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_INETSPACE_V2
+MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = netspace_v2_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &netspace_v2_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
new file mode 100644
index 00000000000..ad3f1ec3379
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-kirkwood/openrd-setup.c
+ *
+ * Marvell OpenRD (Base|Client) Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_nand_parts[] = {
+        {
+                .name           = "u-boot",
+                .offset         = 0,
+                .size           = SZ_1M,
+                .mask_flags     = MTD_WRITEABLE
+        }, {
+                .name           = "uImage",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = SZ_4M
+        }, {
+                .name           = "root",
+                .offset         = MTDPART_OFS_NXTBLK,
+                .size           = MTDPART_SIZ_FULL
+        },
+};
+
+static struct mv643xx_eth_platform_data openrd_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data openrd_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(24),
+};
+
+static struct mv_sata_platform_data openrd_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct mvsdio_platform_data openrd_mvsdio_data = {
+        .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_mpp_config[] __initdata = {
+        MPP29_GPIO,
+        0
+};
+
+static void __init openrd_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_init();
+        kirkwood_mpp_conf(openrd_mpp_config);
+
+        kirkwood_uart0_init();
+        kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
+
+        kirkwood_ehci_init();
+
+        kirkwood_ge00_init(&openrd_ge00_data);
+        if (machine_is_openrd_client())
+                kirkwood_ge01_init(&openrd_ge01_data);
+        kirkwood_sata_init(&openrd_sata_data);
+        kirkwood_sdio_init(&openrd_mvsdio_data);
+
+        kirkwood_i2c_init();
+}
+
+static int __init openrd_pci_init(void)
+{
+        if (machine_is_openrd_base() || machine_is_openrd_client())
+                kirkwood_pcie_init();
+
+        return 0;
+}
+subsys_initcall(openrd_pci_init);
+
+#ifdef CONFIG_MACH_OPENRD_BASE
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = openrd_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_OPENRD_CLIENT
+MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
+        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = openrd_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
deleted file mode 100644
index 77617c72229..00000000000
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/openrd_base-setup.c
- *
- * Marvell OpenRD Base Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
-#include "common.h"
-#include "mpp.h"
-
-static struct mtd_partition openrd_base_nand_parts[] = {
-        {
-                .name = "u-boot",
-                .offset = 0,
-                .size = SZ_1M
-        }, {
-                .name = "uImage",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = SZ_4M
-        }, {
-                .name = "root",
-                .offset = MTDPART_OFS_NXTBLK,
-                .size = MTDPART_SIZ_FULL
-        },
-};
-
-static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
-};
-
-static struct mv_sata_platform_data openrd_base_sata_data = {
-        .n_ports        = 2,
-};
-
-static struct mvsdio_platform_data openrd_base_mvsdio_data = {
-        .gpio_card_detect = 29, /* MPP29 used as SD card detect */
-};
-
-static unsigned int openrd_base_mpp_config[] __initdata = {
-        MPP29_GPIO,
-        0
-};
-
-static void __init openrd_base_init(void)
-{
-        /*
-         * Basic setup. Needs to be called early.
-         */
-        kirkwood_init();
-        kirkwood_mpp_conf(openrd_base_mpp_config);
-
-        kirkwood_uart0_init();
-        kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
-
-        kirkwood_ehci_init();
-
-        kirkwood_ge00_init(&openrd_base_ge00_data);
-        kirkwood_sata_init(&openrd_base_sata_data);
-        kirkwood_sdio_init(&openrd_base_mvsdio_data);
-
-        kirkwood_i2c_init();
-}
-
-static int __init openrd_base_pci_init(void)
-{
-        if (machine_is_openrd_base())
-                kirkwood_pcie_init();
-
-        return 0;
- }
-subsys_initcall(openrd_base_pci_init);
-
-
-MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
-        /* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
-        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
-        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
-        .boot_params    = 0x00000100,
-        .init_machine   = openrd_base_init,
-        .map_io         = kirkwood_map_io,
-        .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
-MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d084..3bf6304158f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
          */
         kirkwood_init();
 
+        orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+        if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+            gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+                pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
         kirkwood_ehci_init();
         kirkwood_ge00_init(&rd88f6192_ge00_data);
         kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index c7319eeac8b..a00879d34d5 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/ata_platform.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
@@ -42,10 +43,19 @@ static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
 };
 
+static struct mv_sata_platform_data sheeva_esata_sata_data = {
+        .n_ports        = 2,
+};
+
 static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
         /* unfortunately the CD signal has not been connected */
 };
 
+static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
+        .gpio_write_protect = 44, /* MPP44 used as SD write protect */
+        .gpio_card_detect = 47,   /* MPP47 used as SD card detect */
+};
+
 static struct gpio_led sheevaplug_led_pins[] = {
         {
                 .name                   = "plug:green:health",
@@ -74,13 +84,26 @@ static unsigned int sheevaplug_mpp_config[] __initdata = {
         0
 };
 
+static unsigned int sheeva_esata_mpp_config[] __initdata = {
+        MPP29_GPIO,     /* USB Power Enable */
+        MPP44_GPIO,     /* SD Write Protect */
+        MPP47_GPIO,     /* SD Card Detect */
+        MPP49_GPIO,     /* LED Green */
+        0
+};
+
 static void __init sheevaplug_init(void)
 {
         /*
          * Basic setup. Needs to be called early.
          */
         kirkwood_init();
-        kirkwood_mpp_conf(sheevaplug_mpp_config);
+
+        /* setup gpio pin select */
+        if (machine_is_sheeva_esata())
+                kirkwood_mpp_conf(sheeva_esata_mpp_config);
+        else
+                kirkwood_mpp_conf(sheevaplug_mpp_config);
 
         kirkwood_uart0_init();
         kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
@@ -91,11 +114,21 @@ static void __init sheevaplug_init(void)
         kirkwood_ehci_init();
 
         kirkwood_ge00_init(&sheevaplug_ge00_data);
-        kirkwood_sdio_init(&sheevaplug_mvsdio_data);
+
+        /* honor lower power consumption for plugs with out eSATA */
+        if (machine_is_sheeva_esata())
+                kirkwood_sata_init(&sheeva_esata_sata_data);
+
+        /* enable sd wp and sd cd on plugs with esata */
+        if (machine_is_sheeva_esata())
+                kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
+        else
+                kirkwood_sdio_init(&sheevaplug_mvsdio_data);
 
         platform_device_register(&sheevaplug_leds);
 }
 
+#ifdef CONFIG_MACH_SHEEVAPLUG
 MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
         /* Maintainer: shadi Ammouri <shadi@marvell.com> */
         .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
@@ -106,3 +139,16 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
         .init_irq       = kirkwood_init_irq,
         .timer          = &kirkwood_timer,
 MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
+MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
+        .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+        .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = sheevaplug_init,
+        .map_io         = kirkwood_map_io,
+        .init_irq       = kirkwood_init_irq,
+        .timer          = &kirkwood_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index c6a564fc4a7..6ab843eaa35 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -1,6 +1,6 @@
 if ARCH_MMP
 
-menu "Marvell PXA168/910 Implmentations"
+menu "Marvell PXA168/910/MMP2 Implmentations"
 
 config MACH_ASPENITE
         bool "Marvell's PXA168 Aspenite Development Board"
@@ -16,6 +16,13 @@ config MACH_ZYLONITE2
           Say 'Y' here if you want to support the Marvell PXA168-based
           Zylonite2 Development Board.
 
+config MACH_AVENGERS_LITE
+        bool "Marvell's PXA168 Avengers Lite Development Board"
+        select CPU_PXA168
+        help
+          Say 'Y' here if you want to support the Marvell PXA168-based
+          Avengers Lite Development Board.
+
 config MACH_TAVOREVB
         bool "Marvell's PXA910 TavorEVB Development Board"
         select CPU_PXA910
@@ -30,6 +37,26 @@ config MACH_TTC_DKB
           Say 'Y' here if you want to support the Marvell PXA910-based
           TTC_DKB Development Board.
 
+config MACH_FLINT
+        bool "Marvell's Flint Development Platform"
+        select CPU_MMP2
+        help
+          Say 'Y' here if you want to support the Marvell MMP2-based
+          Flint Development Platform.
+          MMP2-based board can't be co-existed with PXA168-based &
+          PXA910-based development board. Since MMP2 is compatible to
+          ARMv6 architecture.
+
+config MACH_MARVELL_JASPER
+        bool "Marvell's Jasper Development Platform"
+        select CPU_MMP2
+        help
+          Say 'Y' here if you want to support the Marvell MMP2-base
+          Jasper Development Platform.
+          MMP2-based board can't be co-existed with PXA168-based &
+          PXA910-based development board. Since MMP2 is compatible to
+          ARMv6 architecture.
+
 endmenu
 
 config CPU_PXA168
@@ -44,4 +71,10 @@ config CPU_PXA910
         help
           Select code specific to PXA910
 
+config CPU_MMP2
+        bool
+        select CPU_V6
+        select CPU_32v6K
+        help
+          Select code specific to MMP2. MMP2 is ARMv6 compatible.
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 6883e658488..8b66d06739c 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -2,14 +2,18 @@
 # Makefile for Marvell's PXA168 processors line
 #
 
-obj-y                           += common.o clock.o devices.o irq.o time.o
+obj-y                           += common.o clock.o devices.o time.o
 
 # SoC support
-obj-$(CONFIG_CPU_PXA168)        += pxa168.o
-obj-$(CONFIG_CPU_PXA910)        += pxa910.o
+obj-$(CONFIG_CPU_PXA168)        += pxa168.o irq-pxa168.o
+obj-$(CONFIG_CPU_PXA910)        += pxa910.o irq-pxa168.o
+obj-$(CONFIG_CPU_MMP2)          += mmp2.o irq-mmp2.o
 
 # board support
 obj-$(CONFIG_MACH_ASPENITE)     += aspenite.o
 obj-$(CONFIG_MACH_ZYLONITE2)    += aspenite.o
+obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)     += tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)      += ttc_dkb.o
+obj-$(CONFIG_MACH_FLINT)        += flint.o
+obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
new file mode 100644
index 00000000000..8c3fa5d14f4
--- /dev/null
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -0,0 +1,51 @@
+/*
+ *  linux/arch/arm/mach-mmp/avengers_lite.c
+ *
+ *  Support for the Marvell PXA168-based Avengers lite Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-pxa168.h>
+#include <mach/pxa168.h>
+#include <mach/irqs.h>
+
+
+#include "common.h"
+#include <linux/delay.h>
+
+/* Avengers lite MFP configurations */
+static unsigned long avengers_lite_pin_config_V16F[] __initdata = {
+        /* DEBUG_UART */
+        GPIO88_UART2_TXD,
+        GPIO89_UART2_RXD,
+};
+
+static void __init avengers_lite_init(void)
+{
+        mfp_config(ARRAY_AND_SIZE(avengers_lite_pin_config_V16F));
+
+        /* on-chip devices */
+        pxa168_add_uart(2);
+}
+
+MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
+        .phys_io        = APB_PHYS_BASE,
+        .boot_params    = 0x00000100,
+        .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa168_init_irq,
+        .timer          = &pxa168_timer,
+        .init_machine   = avengers_lite_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index c33fbbc4941..b4a0ba05a0f 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -3,11 +3,15 @@
 struct sys_timer;
 
 extern void timer_init(int irq);
+extern void mmp2_clear_pmic_int(void);
 
 extern struct sys_timer pxa168_timer;
 extern struct sys_timer pxa910_timer;
+extern struct sys_timer mmp2_timer;
 extern void __init pxa168_init_irq(void);
 extern void __init pxa910_init_irq(void);
+extern void __init mmp2_init_icu(void);
+extern void __init mmp2_init_irq(void);
 
 extern void __init icu_init_irq(void);
 extern void __init pxa_map_io(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
new file mode 100644
index 00000000000..4ec7709a346
--- /dev/null
+++ b/arch/arm/mach-mmp/flint.c
@@ -0,0 +1,123 @@
+/*
+ *  linux/arch/arm/mach-mmp/flint.c
+ *
+ *  Support for the Marvell Flint Development Platform.
+ *
+ *  Copyright (C) 2009 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long flint_pin_config[] __initdata = {
+        /* UART1 */
+        GPIO45_UART1_RXD,
+        GPIO46_UART1_TXD,
+
+        /* UART2 */
+        GPIO47_UART2_RXD,
+        GPIO48_UART2_TXD,
+
+        /* SMC */
+        GPIO151_SMC_SCLK,
+        GPIO145_SMC_nCS0,
+        GPIO146_SMC_nCS1,
+        GPIO152_SMC_BE0,
+        GPIO153_SMC_BE1,
+        GPIO154_SMC_IRQ,
+        GPIO113_SMC_RDY,
+
+        /*Ethernet*/
+        GPIO155_GPIO155,
+
+        /* DFI */
+        GPIO168_DFI_D0,
+        GPIO167_DFI_D1,
+        GPIO166_DFI_D2,
+        GPIO165_DFI_D3,
+        GPIO107_DFI_D4,
+        GPIO106_DFI_D5,
+        GPIO105_DFI_D6,
+        GPIO104_DFI_D7,
+        GPIO111_DFI_D8,
+        GPIO164_DFI_D9,
+        GPIO163_DFI_D10,
+        GPIO162_DFI_D11,
+        GPIO161_DFI_D12,
+        GPIO110_DFI_D13,
+        GPIO109_DFI_D14,
+        GPIO108_DFI_D15,
+        GPIO143_ND_nCS0,
+        GPIO144_ND_nCS1,
+        GPIO147_ND_nWE,
+        GPIO148_ND_nRE,
+        GPIO150_ND_ALE,
+        GPIO149_ND_CLE,
+        GPIO112_ND_RDY0,
+        GPIO160_ND_RDY1,
+};
+
+static struct smc91x_platdata flint_smc91x_info = {
+        .flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_resources[] = {
+        [0] = {
+                .start  = SMC_CS1_PHYS_BASE + 0x300,
+                .end    = SMC_CS1_PHYS_BASE + 0xfffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = gpio_to_irq(155),
+                .end    = gpio_to_irq(155),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+        }
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smc91x",
+        .id             = 0,
+        .dev            = {
+                .platform_data = &flint_smc91x_info,
+        },
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+};
+
+static void __init flint_init(void)
+{
+        mfp_config(ARRAY_AND_SIZE(flint_pin_config));
+
+        /* on-chip devices */
+        mmp2_add_uart(1);
+        mmp2_add_uart(2);
+
+        /* off-chip devices */
+        platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(FLINT, "Flint Development Platform")
+        .phys_io        = APB_PHYS_BASE,
+        .boot_params    = 0x00000100,
+        .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = mmp2_init_irq,
+        .timer          = &mmp2_timer,
+        .init_machine   = flint_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index 25e797b0908..83b18721d93 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -8,6 +8,7 @@
  *
  * PXA168    A0    0x41159263   0x56158400   0x00A0A333
  * PXA910    Y0    0x41159262   0x56158000   0x00F0C910
+ * MMP2      Z0                 0x560f5811
  */
 
 #ifdef CONFIG_CPU_PXA168
@@ -24,7 +25,15 @@
 #  define __cpu_is_pxa910(id)   (0)
 #endif
 
+#ifdef CONFIG_CPU_MMP2
+#  define __cpu_is_mmp2(id)     \
+        ({ unsigned int _id = ((id) >> 8) & 0xff; _id == 0x58; })
+#else
+#  define __cpu_is_mmp2(id)     (0)
+#endif
+
 #define cpu_is_pxa168()         ({ __cpu_is_pxa168(read_cpuid_id()); })
 #define cpu_is_pxa910()         ({ __cpu_is_pxa910(read_cpuid_id()); })
+#define cpu_is_mmp2()           ({ __cpu_is_mmp2(read_cpuid_id()); })
 
 #endif /* __ASM_MACH_CPUTYPE_H */
diff --git a/arch/arm/mach-mmp/include/mach/devices.h b/arch/arm/mach-mmp/include/mach/devices.h
index 24585397217..1fa0a492454 100644
--- a/arch/arm/mach-mmp/include/mach/devices.h
+++ b/arch/arm/mach-mmp/include/mach/devices.h
@@ -34,4 +34,16 @@ struct pxa_device_desc pxa910_device_##_name __initdata = {		\
         .size           = _size,                                        \
         .dma            = { _dma },                                     \
 };
+
+#define MMP2_DEVICE(_name, _drv, _id, _irq, _start, _size, _dma...)     \
+struct pxa_device_desc mmp2_device_##_name __initdata = {               \
+        .dev_name       = "mmp2-" #_name,                               \
+        .drv_name       = _drv,                                         \
+        .id             = _id,                                          \
+        .irq            = IRQ_MMP2_##_irq,                              \
+        .start          = _start,                                       \
+        .size           = _size,                                        \
+        .dma            = { _dma },                                     \
+}
+
 extern int pxa_register_device(struct pxa_device_desc *, void *, size_t);
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index 6d3cd35478b..c42d9d4e892 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -15,7 +15,12 @@
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
-        ldr     \base, =ICU_AP_IRQ_SEL_INT_NUM
+        mrc     p15, 0, \tmp, c0, c0, 0         @ CPUID
+        and     \tmp, \tmp, #0xff00
+        cmp     \tmp, #0x5800
+        ldr     \base, =ICU_VIRT_BASE
+        addne   \base, \base, #0x10c            @ PJ1 AP INT SEL register
+        addeq   \base, \base, #0x104            @ PJ4 IRQ SEL register
         .endm
 
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index d68871b0f28..02701196ea0 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -113,10 +113,119 @@
 #define IRQ_PXA910_AP_PMU               60
 #define IRQ_PXA910_SM_INT               63      /* from PinMux */
 
-#define IRQ_GPIO_START                  64
-#define IRQ_GPIO_NUM                    128
+/*
+ * Interrupt numbers for MMP2
+ */
+#define IRQ_MMP2_NONE                   (-1)
+#define IRQ_MMP2_SSP1                   0
+#define IRQ_MMP2_SSP2                   1
+#define IRQ_MMP2_SSPA1                  2
+#define IRQ_MMP2_SSPA2                  3
+#define IRQ_MMP2_PMIC_MUX               4       /* PMIC & Charger */
+#define IRQ_MMP2_RTC_MUX                5
+#define IRQ_MMP2_TWSI1                  7
+#define IRQ_MMP2_GPU                    8
+#define IRQ_MMP2_KEYPAD                 9
+#define IRQ_MMP2_ROTARY                 10
+#define IRQ_MMP2_TRACKBALL              11
+#define IRQ_MMP2_ONEWIRE                12
+#define IRQ_MMP2_TIMER1                 13
+#define IRQ_MMP2_TIMER2                 14
+#define IRQ_MMP2_TIMER3                 15
+#define IRQ_MMP2_RIPC                   16
+#define IRQ_MMP2_TWSI_MUX               17      /* TWSI2 ~ TWSI6 */
+#define IRQ_MMP2_HDMI                   19
+#define IRQ_MMP2_SSP3                   20
+#define IRQ_MMP2_SSP4                   21
+#define IRQ_MMP2_USB_HS1                22
+#define IRQ_MMP2_USB_HS2                23
+#define IRQ_MMP2_UART3                  24
+#define IRQ_MMP2_UART1                  27
+#define IRQ_MMP2_UART2                  28
+#define IRQ_MMP2_MIPI_DSI               29
+#define IRQ_MMP2_CI2                    30
+#define IRQ_MMP2_PMU_TIMER1             31
+#define IRQ_MMP2_PMU_TIMER2             32
+#define IRQ_MMP2_PMU_TIMER3             33
+#define IRQ_MMP2_USB_FS                 34
+#define IRQ_MMP2_MISC_MUX               35
+#define IRQ_MMP2_WDT1                   36
+#define IRQ_MMP2_NAND_DMA               37
+#define IRQ_MMP2_USIM                   38
+#define IRQ_MMP2_MMC                    39
+#define IRQ_MMP2_WTM                    40
+#define IRQ_MMP2_LCD                    41
+#define IRQ_MMP2_CI                     42
+#define IRQ_MMP2_IRE                    43
+#define IRQ_MMP2_USB_OTG                44
+#define IRQ_MMP2_NAND                   45
+#define IRQ_MMP2_UART4                  46
+#define IRQ_MMP2_DMA_FIQ                47
+#define IRQ_MMP2_DMA_RIQ                48
+#define IRQ_MMP2_GPIO                   49
+#define IRQ_MMP2_SSP_MUX                51
+#define IRQ_MMP2_MMC2                   52
+#define IRQ_MMP2_MMC3                   53
+#define IRQ_MMP2_MMC4                   54
+#define IRQ_MMP2_MIPI_HSI               55
+#define IRQ_MMP2_MSP                    58
+#define IRQ_MMP2_MIPI_SLIM_DMA          59
+#define IRQ_MMP2_PJ4_FREQ_CHG           60
+#define IRQ_MMP2_MIPI_SLIM              62
+#define IRQ_MMP2_SM                     63
+
+#define IRQ_MMP2_MUX_BASE               64
+
+/* secondary interrupt of INT #4 */
+#define IRQ_MMP2_PMIC_BASE              (IRQ_MMP2_MUX_BASE)
+#define IRQ_MMP2_CHARGER                (IRQ_MMP2_PMIC_BASE + 0)
+#define IRQ_MMP2_PMIC                   (IRQ_MMP2_PMIC_BASE + 1)
+
+/* secondary interrupt of INT #5 */
+#define IRQ_MMP2_RTC_BASE               (IRQ_MMP2_PMIC_BASE + 2)
+#define IRQ_MMP2_RTC_ALARM              (IRQ_MMP2_RTC_BASE + 0)
+#define IRQ_MMP2_RTC                    (IRQ_MMP2_RTC_BASE + 1)
+
+/* secondary interrupt of INT #17 */
+#define IRQ_MMP2_TWSI_BASE              (IRQ_MMP2_RTC_BASE + 2)
+#define IRQ_MMP2_TWSI2                  (IRQ_MMP2_TWSI_BASE + 0)
+#define IRQ_MMP2_TWSI3                  (IRQ_MMP2_TWSI_BASE + 1)
+#define IRQ_MMP2_TWSI4                  (IRQ_MMP2_TWSI_BASE + 2)
+#define IRQ_MMP2_TWSI5                  (IRQ_MMP2_TWSI_BASE + 3)
+#define IRQ_MMP2_TWSI6                  (IRQ_MMP2_TWSI_BASE + 4)
+
+/* secondary interrupt of INT #35 */
+#define IRQ_MMP2_MISC_BASE              (IRQ_MMP2_TWSI_BASE + 5)
+#define IRQ_MMP2_PERF                   (IRQ_MMP2_MISC_BASE + 0)
+#define IRQ_MMP2_L2_PA_ECC              (IRQ_MMP2_MISC_BASE + 1)
+#define IRQ_MMP2_L2_ECC                 (IRQ_MMP2_MISC_BASE + 2)
+#define IRQ_MMP2_L2_UECC                (IRQ_MMP2_MISC_BASE + 3)
+#define IRQ_MMP2_DDR                    (IRQ_MMP2_MISC_BASE + 4)
+#define IRQ_MMP2_FAB0_TIMEOUT           (IRQ_MMP2_MISC_BASE + 5)
+#define IRQ_MMP2_FAB1_TIMEOUT           (IRQ_MMP2_MISC_BASE + 6)
+#define IRQ_MMP2_FAB2_TIMEOUT           (IRQ_MMP2_MISC_BASE + 7)
+#define IRQ_MMP2_THERMAL                (IRQ_MMP2_MISC_BASE + 9)
+#define IRQ_MMP2_MAIN_PMU               (IRQ_MMP2_MISC_BASE + 10)
+#define IRQ_MMP2_WDT2                   (IRQ_MMP2_MISC_BASE + 11)
+#define IRQ_MMP2_CORESIGHT              (IRQ_MMP2_MISC_BASE + 12)
+#define IRQ_MMP2_COMMTX                 (IRQ_MMP2_MISC_BASE + 13)
+#define IRQ_MMP2_COMMRX                 (IRQ_MMP2_MISC_BASE + 14)
+
+/* secondary interrupt of INT #51 */
+#define IRQ_MMP2_SSP_BASE               (IRQ_MMP2_MISC_BASE + 15)
+#define IRQ_MMP2_SSP1_SRDY              (IRQ_MMP2_SSP_BASE + 0)
+#define IRQ_MMP2_SSP3_SRDY              (IRQ_MMP2_SSP_BASE + 1)
+
+#define IRQ_MMP2_MUX_END                (IRQ_MMP2_SSP_BASE + 2)
+
+#define IRQ_GPIO_START                  128
+#define IRQ_GPIO_NUM                    192
 #define IRQ_GPIO(x)                     (IRQ_GPIO_START + (x))
 
-#define NR_IRQS         (IRQ_GPIO_START + IRQ_GPIO_NUM)
+/* Board IRQ - 64 by default, increase if not enough */
+#define IRQ_BOARD_START                 (IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_END                   (IRQ_BOARD_START + 64)
+
+#define NR_IRQS                         (IRQ_BOARD_END)
 
 #endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
new file mode 100644
index 00000000000..9f9f8143e27
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -0,0 +1,240 @@
+#ifndef __ASM_MACH_MFP_MMP2_H
+#define __ASM_MACH_MFP_MMP2_H
+
+#include <mach/mfp.h>
+
+#define MFP_DRIVE_VERY_SLOW     (0x0 << 13)
+#define MFP_DRIVE_SLOW          (0x2 << 13)
+#define MFP_DRIVE_MEDIUM        (0x4 << 13)
+#define MFP_DRIVE_FAST          (0x8 << 13)
+
+/* GPIO */
+
+/* DFI */
+#define GPIO108_DFI_D15         MFP_CFG(GPIO108, AF0)
+#define GPIO109_DFI_D14         MFP_CFG(GPIO109, AF0)
+#define GPIO110_DFI_D13         MFP_CFG(GPIO110, AF0)
+#define GPIO161_DFI_D12         MFP_CFG(GPIO161, AF0)
+#define GPIO162_DFI_D11         MFP_CFG(GPIO162, AF0)
+#define GPIO163_DFI_D10         MFP_CFG(GPIO163, AF0)
+#define GPIO164_DFI_D9          MFP_CFG(GPIO164, AF0)
+#define GPIO111_DFI_D8          MFP_CFG(GPIO111, AF0)
+#define GPIO104_DFI_D7          MFP_CFG(GPIO104, AF0)
+#define GPIO105_DFI_D6          MFP_CFG(GPIO105, AF0)
+#define GPIO106_DFI_D5          MFP_CFG(GPIO106, AF0)
+#define GPIO107_DFI_D4          MFP_CFG(GPIO107, AF0)
+#define GPIO165_DFI_D3          MFP_CFG(GPIO165, AF0)
+#define GPIO166_DFI_D2          MFP_CFG(GPIO166, AF0)
+#define GPIO167_DFI_D1          MFP_CFG(GPIO167, AF0)
+#define GPIO168_DFI_D0          MFP_CFG(GPIO168, AF0)
+#define GPIO143_ND_nCS0         MFP_CFG(GPIO143, AF0)
+#define GPIO144_ND_nCS1         MFP_CFG(GPIO144, AF0)
+#define GPIO147_ND_nWE          MFP_CFG(GPIO147, AF0)
+#define GPIO148_ND_nRE          MFP_CFG(GPIO148, AF0)
+#define GPIO150_ND_ALE          MFP_CFG(GPIO150, AF0)
+#define GPIO149_ND_CLE          MFP_CFG(GPIO149, AF0)
+#define GPIO112_ND_RDY0         MFP_CFG(GPIO112, AF0)
+#define GPIO160_ND_RDY1         MFP_CFG(GPIO160, AF0)
+
+/* Static Memory Controller */
+#define GPIO145_SMC_nCS0        MFP_CFG(GPIO145, AF0)
+#define GPIO146_SMC_nCS1        MFP_CFG(GPIO146, AF0)
+#define GPIO152_SMC_BE0         MFP_CFG(GPIO152, AF0)
+#define GPIO153_SMC_BE1         MFP_CFG(GPIO153, AF0)
+#define GPIO154_SMC_IRQ         MFP_CFG(GPIO154, AF0)
+#define GPIO113_SMC_RDY         MFP_CFG(GPIO113, AF0)
+#define GPIO151_SMC_SCLK        MFP_CFG(GPIO151, AF0)
+
+/* Ethernet */
+#define GPIO155_SM_ADVMUX       MFP_CFG(GPIO155, AF2)
+#define GPIO155_GPIO155         MFP_CFG(GPIO155, AF1)
+
+/* UART1 */
+#define GPIO45_UART1_RXD        MFP_CFG(GPIO45, AF1)
+#define GPIO46_UART1_TXD        MFP_CFG(GPIO46, AF1)
+#define GPIO29_UART1_RXD        MFP_CFG(GPIO29, AF1)
+#define GPIO30_UART1_TXD        MFP_CFG(GPIO30, AF1)
+#define GPIO31_UART1_CTS        MFP_CFG(GPIO31, AF1)
+#define GPIO32_UART1_RTS        MFP_CFG(GPIO32, AF1)
+
+/* UART2 */
+#define GPIO47_UART2_RXD        MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART2_TXD        MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART2_CTS        MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART2_RTS        MFP_CFG(GPIO50, AF1)
+
+/* UART3 */
+#define GPIO51_UART3_RXD        MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART3_TXD        MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART3_CTS        MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART3_RTS        MFP_CFG(GPIO54, AF1)
+
+/* MMC1 */
+#define GPIO124_MMC1_DAT7       MFP_CFG_DRV(GPIO124, AF1, FAST)
+#define GPIO125_MMC1_DAT6       MFP_CFG_DRV(GPIO125, AF1, FAST)
+#define GPIO129_MMC1_DAT5       MFP_CFG_DRV(GPIO129, AF1, FAST)
+#define GPIO130_MMC1_DAT4       MFP_CFG_DRV(GPIO130, AF1, FAST)
+#define GPIO131_MMC1_DAT3       MFP_CFG_DRV(GPIO131, AF1, FAST)
+#define GPIO132_MMC1_DAT2       MFP_CFG_DRV(GPIO132, AF1, FAST)
+#define GPIO133_MMC1_DAT1       MFP_CFG_DRV(GPIO133, AF1, FAST)
+#define GPIO134_MMC1_DAT0       MFP_CFG_DRV(GPIO134, AF1, FAST)
+#define GPIO136_MMC1_CMD        MFP_CFG_DRV(GPIO136, AF1, FAST)
+#define GPIO139_MMC1_CLK        MFP_CFG_DRV(GPIO139, AF1, FAST)
+#define GPIO140_MMC1_CD         MFP_CFG_DRV(GPIO140, AF1, FAST)
+#define GPIO141_MMC1_WP         MFP_CFG_DRV(GPIO141, AF1, FAST)
+
+/*MMC2*/
+#define GPIO37_MMC2_DAT3        MFP_CFG_DRV(GPIO37, AF1, FAST)
+#define GPIO38_MMC2_DAT2        MFP_CFG_DRV(GPIO38, AF1, FAST)
+#define GPIO39_MMC2_DAT1        MFP_CFG_DRV(GPIO39, AF1, FAST)
+#define GPIO40_MMC2_DAT0        MFP_CFG_DRV(GPIO40, AF1, FAST)
+#define GPIO41_MMC2_CMD         MFP_CFG_DRV(GPIO41, AF1, FAST)
+#define GPIO42_MMC2_CLK         MFP_CFG_DRV(GPIO42, AF1, FAST)
+
+/*MMC3*/
+#define GPIO165_MMC3_DAT7       MFP_CFG_DRV(GPIO165, AF2, FAST)
+#define GPIO162_MMC3_DAT6       MFP_CFG_DRV(GPIO162, AF2, FAST)
+#define GPIO166_MMC3_DAT5       MFP_CFG_DRV(GPIO166, AF2, FAST)
+#define GPIO163_MMC3_DAT4       MFP_CFG_DRV(GPIO163, AF2, FAST)
+#define GPIO167_MMC3_DAT3       MFP_CFG_DRV(GPIO167, AF2, FAST)
+#define GPIO164_MMC3_DAT2       MFP_CFG_DRV(GPIO164, AF2, FAST)
+#define GPIO168_MMC3_DAT1       MFP_CFG_DRV(GPIO168, AF2, FAST)
+#define GPIO111_MMC3_DAT0       MFP_CFG_DRV(GPIO111, AF2, FAST)
+#define GPIO112_MMC3_CMD        MFP_CFG_DRV(GPIO112, AF2, FAST)
+#define GPIO151_MMC3_CLK        MFP_CFG_DRV(GPIO151, AF2, FAST)
+
+/* LCD */
+#define GPIO74_LCD_FCLK         MFP_CFG_DRV(GPIO74, AF1, FAST)
+#define GPIO75_LCD_LCLK         MFP_CFG_DRV(GPIO75, AF1, FAST)
+#define GPIO76_LCD_PCLK         MFP_CFG_DRV(GPIO76, AF1, FAST)
+#define GPIO77_LCD_DENA         MFP_CFG_DRV(GPIO77, AF1, FAST)
+#define GPIO78_LCD_DD0          MFP_CFG_DRV(GPIO78, AF1, FAST)
+#define GPIO79_LCD_DD1          MFP_CFG_DRV(GPIO79, AF1, FAST)
+#define GPIO80_LCD_DD2          MFP_CFG_DRV(GPIO80, AF1, FAST)
+#define GPIO81_LCD_DD3          MFP_CFG_DRV(GPIO81, AF1, FAST)
+#define GPIO82_LCD_DD4          MFP_CFG_DRV(GPIO82, AF1, FAST)
+#define GPIO83_LCD_DD5          MFP_CFG_DRV(GPIO83, AF1, FAST)
+#define GPIO84_LCD_DD6          MFP_CFG_DRV(GPIO84, AF1, FAST)
+#define GPIO85_LCD_DD7          MFP_CFG_DRV(GPIO85, AF1, FAST)
+#define GPIO86_LCD_DD8          MFP_CFG_DRV(GPIO86, AF1, FAST)
+#define GPIO87_LCD_DD9          MFP_CFG_DRV(GPIO87, AF1, FAST)
+#define GPIO88_LCD_DD10         MFP_CFG_DRV(GPIO88, AF1, FAST)
+#define GPIO89_LCD_DD11         MFP_CFG_DRV(GPIO89, AF1, FAST)
+#define GPIO90_LCD_DD12         MFP_CFG_DRV(GPIO90, AF1, FAST)
+#define GPIO91_LCD_DD13         MFP_CFG_DRV(GPIO91, AF1, FAST)
+#define GPIO92_LCD_DD14         MFP_CFG_DRV(GPIO92, AF1, FAST)
+#define GPIO93_LCD_DD15         MFP_CFG_DRV(GPIO93, AF1, FAST)
+#define GPIO94_LCD_DD16         MFP_CFG_DRV(GPIO94, AF1, FAST)
+#define GPIO95_LCD_DD17         MFP_CFG_DRV(GPIO95, AF1, FAST)
+#define GPIO96_LCD_DD18         MFP_CFG_DRV(GPIO96, AF1, FAST)
+#define GPIO97_LCD_DD19         MFP_CFG_DRV(GPIO97, AF1, FAST)
+#define GPIO98_LCD_DD20         MFP_CFG_DRV(GPIO98, AF1, FAST)
+#define GPIO99_LCD_DD21         MFP_CFG_DRV(GPIO99, AF1, FAST)
+#define GPIO100_LCD_DD22        MFP_CFG_DRV(GPIO100, AF1, FAST)
+#define GPIO101_LCD_DD23        MFP_CFG_DRV(GPIO101, AF1, FAST)
+#define GPIO94_SPI_DCLK         MFP_CFG_DRV(GPIO94, AF3, FAST)
+#define GPIO95_SPI_CS0          MFP_CFG_DRV(GPIO95, AF3, FAST)
+#define GPIO96_SPI_DIN          MFP_CFG_DRV(GPIO96, AF3, FAST)
+#define GPIO97_SPI_DOUT         MFP_CFG_DRV(GPIO97, AF3, FAST)
+#define GPIO98_LCD_RST          MFP_CFG_DRV(GPIO98, AF0, FAST)
+
+#define GPIO114_MN_CLK_OUT      MFP_CFG_DRV(GPIO114, AF1, FAST)
+
+/*LCD TV path*/
+#define GPIO124_LCD_DD24        MFP_CFG_DRV(GPIO124, AF2, FAST)
+#define GPIO125_LCD_DD25        MFP_CFG_DRV(GPIO125, AF2, FAST)
+#define GPIO126_LCD_DD33        MFP_CFG_DRV(GPIO126, AF2, FAST)
+#define GPIO127_LCD_DD26        MFP_CFG_DRV(GPIO127, AF2, FAST)
+#define GPIO128_LCD_DD27        MFP_CFG_DRV(GPIO128, AF2, FAST)
+#define GPIO129_LCD_DD28        MFP_CFG_DRV(GPIO129, AF2, FAST)
+#define GPIO130_LCD_DD29        MFP_CFG_DRV(GPIO130, AF2, FAST)
+#define GPIO135_LCD_DD30        MFP_CFG_DRV(GPIO135, AF2, FAST)
+#define GPIO137_LCD_DD31        MFP_CFG_DRV(GPIO137, AF2, FAST)
+#define GPIO138_LCD_DD32        MFP_CFG_DRV(GPIO138, AF2, FAST)
+#define GPIO140_LCD_DD34        MFP_CFG_DRV(GPIO140, AF2, FAST)
+#define GPIO141_LCD_DD35        MFP_CFG_DRV(GPIO141, AF2, FAST)
+
+/* I2C */
+#define GPIO43_TWSI2_SCL        MFP_CFG_DRV(GPIO43, AF1, SLOW)
+#define GPIO44_TWSI2_SDA        MFP_CFG_DRV(GPIO44, AF1, SLOW)
+#define GPIO71_TWSI3_SCL        MFP_CFG_DRV(GPIO71, AF1, SLOW)
+#define GPIO72_TWSI3_SDA        MFP_CFG_DRV(GPIO72, AF1, SLOW)
+#define GPIO99_TWSI5_SCL        MFP_CFG_DRV(GPIO99, AF4, SLOW)
+#define GPIO100_TWSI5_SDA       MFP_CFG_DRV(GPIO100, AF4, SLOW)
+#define GPIO97_TWSI6_SCL        MFP_CFG_DRV(GPIO97, AF2, SLOW)
+#define GPIO98_TWSI6_SDA        MFP_CFG_DRV(GPIO98, AF2, SLOW)
+
+/* SSPA1 */
+#define GPIO24_I2S_SYSCLK       MFP_CFG(GPIO24, AF1)
+#define GPIO25_I2S_BITCLK       MFP_CFG(GPIO25, AF1)
+#define GPIO26_I2S_SYNC         MFP_CFG(GPIO26, AF1)
+#define GPIO27_I2S_DATA_OUT     MFP_CFG(GPIO27, AF1)
+#define GPIO28_I2S_SDATA_IN     MFP_CFG(GPIO28, AF1)
+#define GPIO114_I2S_MCLK        MFP_CFG(GPIO114, AF1)
+
+/* SSPA2 */
+#define GPIO33_SSPA2_CLK        MFP_CFG(GPIO33, AF1)
+#define GPIO34_SSPA2_FRM        MFP_CFG(GPIO34, AF1)
+#define GPIO35_SSPA2_TXD        MFP_CFG(GPIO35, AF1)
+#define GPIO36_SSPA2_RXD        MFP_CFG(GPIO36, AF1)
+
+/* Keypad */
+#define GPIO00_KP_MKIN0         MFP_CFG(GPIO0, AF1)
+#define GPIO01_KP_MKOUT0        MFP_CFG(GPIO1, AF1)
+#define GPIO02_KP_MKIN1         MFP_CFG(GPIO2, AF1)
+#define GPIO03_KP_MKOUT1        MFP_CFG(GPIO3, AF1)
+#define GPIO04_KP_MKIN2         MFP_CFG(GPIO4, AF1)
+#define GPIO05_KP_MKOUT2        MFP_CFG(GPIO5, AF1)
+#define GPIO06_KP_MKIN3         MFP_CFG(GPIO6, AF1)
+#define GPIO07_KP_MKOUT3        MFP_CFG(GPIO7, AF1)
+#define GPIO08_KP_MKIN4         MFP_CFG(GPIO8, AF1)
+#define GPIO09_KP_MKOUT4        MFP_CFG(GPIO9, AF1)
+#define GPIO10_KP_MKIN5         MFP_CFG(GPIO10, AF1)
+#define GPIO11_KP_MKOUT5        MFP_CFG(GPIO11, AF1)
+#define GPIO12_KP_MKIN6         MFP_CFG(GPIO12, AF1)
+#define GPIO13_KP_MKOUT6        MFP_CFG(GPIO13, AF1)
+#define GPIO14_KP_MKIN7         MFP_CFG(GPIO14, AF1)
+#define GPIO15_KP_MKOUT7        MFP_CFG(GPIO15, AF1)
+#define GPIO16_KP_DKIN0         MFP_CFG(GPIO16, AF1)
+#define GPIO17_KP_DKIN1         MFP_CFG(GPIO17, AF1)
+#define GPIO18_KP_DKIN2         MFP_CFG(GPIO18, AF1)
+#define GPIO19_KP_DKIN3         MFP_CFG(GPIO19, AF1)
+#define GPIO20_KP_DKIN4         MFP_CFG(GPIO20, AF1)
+#define GPIO21_KP_DKIN5         MFP_CFG(GPIO21, AF1)
+#define GPIO22_KP_DKIN6         MFP_CFG(GPIO22, AF1)
+#define GPIO23_KP_DKIN7         MFP_CFG(GPIO23, AF1)
+
+/* CAMERA */
+#define GPIO59_CCIC_IN7         MFP_CFG_DRV(GPIO59, AF1, FAST)
+#define GPIO60_CCIC_IN6         MFP_CFG_DRV(GPIO60, AF1, FAST)
+#define GPIO61_CCIC_IN5         MFP_CFG_DRV(GPIO61, AF1, FAST)
+#define GPIO62_CCIC_IN4         MFP_CFG_DRV(GPIO62, AF1, FAST)
+#define GPIO63_CCIC_IN3         MFP_CFG_DRV(GPIO63, AF1, FAST)
+#define GPIO64_CCIC_IN2         MFP_CFG_DRV(GPIO64, AF1, FAST)
+#define GPIO65_CCIC_IN1         MFP_CFG_DRV(GPIO65, AF1, FAST)
+#define GPIO66_CCIC_IN0         MFP_CFG_DRV(GPIO66, AF1, FAST)
+#define GPIO67_CAM_HSYNC        MFP_CFG_DRV(GPIO67, AF1, FAST)
+#define GPIO68_CAM_VSYNC        MFP_CFG_DRV(GPIO68, AF1, FAST)
+#define GPIO69_CAM_MCLK         MFP_CFG_DRV(GPIO69, AF1, FAST)
+#define GPIO70_CAM_PCLK         MFP_CFG_DRV(GPIO70, AF1, FAST)
+
+/* Wifi */
+#define GPIO45_GPIO45           MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO46           MFP_CFG(GPIO46, AF0)
+#define GPIO21_GPIO21           MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO22           MFP_CFG(GPIO22, AF0)
+#define GPIO55_GPIO55           MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO56           MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO57           MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO58           MFP_CFG(GPIO58, AF0)
+
+/* Codec*/
+#define GPIO23_GPIO23           MFP_CFG(GPIO23, AF0)
+
+#define GPIO101_GPIO101         MFP_CFG(GPIO101, AF0)
+
+/* PMIC */
+#define PMIC_PMIC_INT           MFP_CFG(PMIC_INT, AF0)
+
+#endif /* __ASM_MACH_MFP_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
index 3b216bf41e7..ded43c455ec 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h
@@ -193,7 +193,9 @@
 #define GPIO32_CF_nCD1          MFP_CFG(GPIO32, AF3)
 #define GPIO33_CF_nCD2          MFP_CFG(GPIO33, AF3)
 
-/* UART1 */
+/* UART */
+#define GPIO88_UART2_TXD        MFP_CFG(GPIO88, AF2)
+#define GPIO89_UART2_RXD        MFP_CFG(GPIO89, AF2)
 #define GPIO107_UART1_TXD       MFP_CFG_DRV(GPIO107, AF1, FAST)
 #define GPIO107_UART1_RXD       MFP_CFG_DRV(GPIO107, AF2, FAST)
 #define GPIO108_UART1_RXD       MFP_CFG_DRV(GPIO108, AF1, FAST)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
new file mode 100644
index 00000000000..459f3be9cfb
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -0,0 +1,60 @@
+#ifndef __ASM_MACH_MMP2_H
+#define __ASM_MACH_MMP2_H
+
+#include <linux/i2c.h>
+#include <mach/devices.h>
+#include <plat/i2c.h>
+
+extern struct pxa_device_desc mmp2_device_uart1;
+extern struct pxa_device_desc mmp2_device_uart2;
+extern struct pxa_device_desc mmp2_device_uart3;
+extern struct pxa_device_desc mmp2_device_uart4;
+extern struct pxa_device_desc mmp2_device_twsi1;
+extern struct pxa_device_desc mmp2_device_twsi2;
+extern struct pxa_device_desc mmp2_device_twsi3;
+extern struct pxa_device_desc mmp2_device_twsi4;
+extern struct pxa_device_desc mmp2_device_twsi5;
+extern struct pxa_device_desc mmp2_device_twsi6;
+
+static inline int mmp2_add_uart(int id)
+{
+        struct pxa_device_desc *d = NULL;
+
+        switch (id) {
+        case 1: d = &mmp2_device_uart1; break;
+        case 2: d = &mmp2_device_uart2; break;
+        case 3: d = &mmp2_device_uart3; break;
+        case 4: d = &mmp2_device_uart4; break;
+        default:
+                return -EINVAL;
+        }
+
+        return pxa_register_device(d, NULL, 0);
+}
+
+static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
+                                  struct i2c_board_info *info, unsigned size)
+{
+        struct pxa_device_desc *d = NULL;
+        int ret;
+
+        switch (id) {
+        case 0: d = &mmp2_device_twsi1; break;
+        case 1: d = &mmp2_device_twsi2; break;
+        case 2: d = &mmp2_device_twsi3; break;
+        case 3: d = &mmp2_device_twsi4; break;
+        case 4: d = &mmp2_device_twsi5; break;
+        case 5: d = &mmp2_device_twsi6; break;
+        default:
+                return -EINVAL;
+        }
+
+        ret = i2c_register_board_info(id, info, size);
+        if (ret)
+                return ret;
+
+        return pxa_register_device(d, data, sizeof(*data));
+}
+
+#endif /* __ASM_MACH_MMP2_H */
+
diff --git a/arch/arm/mach-mmp/include/mach/regs-apbc.h b/arch/arm/mach-mmp/include/mach/regs-apbc.h
index 98ccbee4bd0..712af03fd1a 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apbc.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apbc.h
@@ -69,6 +69,47 @@
 #define APBC_PXA910_ASFAR       APBC_REG(0x050)
 #define APBC_PXA910_ASSAR       APBC_REG(0x054)
 
+/*
+ * APB Clock register offsets for MMP2
+ */
+#define APBC_MMP2_RTC           APBC_REG(0x000)
+#define APBC_MMP2_TWSI1         APBC_REG(0x004)
+#define APBC_MMP2_TWSI2         APBC_REG(0x008)
+#define APBC_MMP2_TWSI3         APBC_REG(0x00c)
+#define APBC_MMP2_TWSI4         APBC_REG(0x010)
+#define APBC_MMP2_ONEWIRE       APBC_REG(0x014)
+#define APBC_MMP2_KPC           APBC_REG(0x018)
+#define APBC_MMP2_TB_ROTARY     APBC_REG(0x01c)
+#define APBC_MMP2_SW_JTAG       APBC_REG(0x020)
+#define APBC_MMP2_TIMERS        APBC_REG(0x024)
+#define APBC_MMP2_UART1         APBC_REG(0x02c)
+#define APBC_MMP2_UART2         APBC_REG(0x030)
+#define APBC_MMP2_UART3         APBC_REG(0x034)
+#define APBC_MMP2_GPIO          APBC_REG(0x038)
+#define APBC_MMP2_PWM0          APBC_REG(0x03c)
+#define APBC_MMP2_PWM1          APBC_REG(0x040)
+#define APBC_MMP2_PWM2          APBC_REG(0x044)
+#define APBC_MMP2_PWM3          APBC_REG(0x048)
+#define APBC_MMP2_SSP0          APBC_REG(0x04c)
+#define APBC_MMP2_SSP1          APBC_REG(0x050)
+#define APBC_MMP2_SSP2          APBC_REG(0x054)
+#define APBC_MMP2_SSP3          APBC_REG(0x058)
+#define APBC_MMP2_SSP4          APBC_REG(0x05c)
+#define APBC_MMP2_SSP5          APBC_REG(0x060)
+#define APBC_MMP2_AIB           APBC_REG(0x064)
+#define APBC_MMP2_ASFAR         APBC_REG(0x068)
+#define APBC_MMP2_ASSAR         APBC_REG(0x06c)
+#define APBC_MMP2_USIM          APBC_REG(0x070)
+#define APBC_MMP2_MPMU          APBC_REG(0x074)
+#define APBC_MMP2_IPC           APBC_REG(0x078)
+#define APBC_MMP2_TWSI5         APBC_REG(0x07c)
+#define APBC_MMP2_TWSI6         APBC_REG(0x080)
+#define APBC_MMP2_TWSI_INTSTS   APBC_REG(0x084)
+#define APBC_MMP2_UART4         APBC_REG(0x088)
+#define APBC_MMP2_RIPC          APBC_REG(0x08c)
+#define APBC_MMP2_THSENS1       APBC_REG(0x090) /* Thermal Sensor */
+#define APBC_MMP2_THSENS_INTSTS APBC_REG(0x0a4)
+
 /* Common APB clock register bit definitions */
 #define APBC_APBCLK     (1 << 0)  /* APB Bus Clock Enable */
 #define APBC_FNCLK      (1 << 1)  /* Functional Clock Enable */
diff --git a/arch/arm/mach-mmp/include/mach/regs-icu.h b/arch/arm/mach-mmp/include/mach/regs-icu.h
index e5f08723e0c..f882d91894b 100644
--- a/arch/arm/mach-mmp/include/mach/regs-icu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-icu.h
@@ -17,10 +17,12 @@
 #define ICU_REG(x)      (ICU_VIRT_BASE + (x))
 
 #define ICU_INT_CONF(n)         ICU_REG((n) << 2)
+#define ICU_INT_CONF_MASK       (0xf)
+
+/************ PXA168/PXA910 (MMP) *********************/
 #define ICU_INT_CONF_AP_INT     (1 << 6)
 #define ICU_INT_CONF_CP_INT     (1 << 5)
 #define ICU_INT_CONF_IRQ        (1 << 4)
-#define ICU_INT_CONF_MASK       (0xf)
 
 #define ICU_AP_FIQ_SEL_INT_NUM  ICU_REG(0x108)  /* AP FIQ Selected Interrupt */
 #define ICU_AP_IRQ_SEL_INT_NUM  ICU_REG(0x10C)  /* AP IRQ Selected Interrupt */
@@ -28,4 +30,42 @@
 #define ICU_INT_STATUS_0        ICU_REG(0x128)  /* Interrupt Stuats 0 */
 #define ICU_INT_STATUS_1        ICU_REG(0x12C)  /* Interrupt Status 1 */
 
+/************************** MMP2 ***********************/
+
+/*
+ * IRQ0/FIQ0 is routed to SP IRQ/FIQ.
+ * IRQ1 is routed to PJ4 IRQ, and IRQ2 is routes to PJ4 FIQ.
+ */
+#define ICU_INT_ROUTE_SP_IRQ            (1 << 4)
+#define ICU_INT_ROUTE_PJ4_IRQ           (1 << 5)
+#define ICU_INT_ROUTE_PJ4_FIQ           (1 << 6)
+
+#define MMP2_ICU_PJ4_IRQ_STATUS0        ICU_REG(0x138)
+#define MMP2_ICU_PJ4_IRQ_STATUS1        ICU_REG(0x13c)
+#define MMP2_ICU_PJ4_FIQ_STATUS0        ICU_REG(0x140)
+#define MMP2_ICU_PJ4_FIQ_STATUS1        ICU_REG(0x144)
+
+#define MMP2_ICU_INT4_STATUS            ICU_REG(0x150)
+#define MMP2_ICU_INT5_STATUS            ICU_REG(0x154)
+#define MMP2_ICU_INT17_STATUS           ICU_REG(0x158)
+#define MMP2_ICU_INT35_STATUS           ICU_REG(0x15c)
+#define MMP2_ICU_INT51_STATUS           ICU_REG(0x160)
+
+#define MMP2_ICU_INT4_MASK              ICU_REG(0x168)
+#define MMP2_ICU_INT5_MASK              ICU_REG(0x16C)
+#define MMP2_ICU_INT17_MASK             ICU_REG(0x170)
+#define MMP2_ICU_INT35_MASK             ICU_REG(0x174)
+#define MMP2_ICU_INT51_MASK             ICU_REG(0x178)
+
+#define MMP2_ICU_SP_IRQ_SEL             ICU_REG(0x100)
+#define MMP2_ICU_PJ4_IRQ_SEL            ICU_REG(0x104)
+#define MMP2_ICU_PJ4_FIQ_SEL            ICU_REG(0x108)
+
+#define MMP2_ICU_INVERT                 ICU_REG(0x164)
+
+#define MMP2_ICU_INV_PMIC               (1 << 0)
+#define MMP2_ICU_INV_PERF               (1 << 1)
+#define MMP2_ICU_INV_COMMTX             (1 << 2)
+#define MMP2_ICU_INV_COMMRX             (1 << 3)
+
 #endif /* __ASM_MACH_ICU_H */
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index c93d5fa5865..a7dcc530721 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -8,15 +8,16 @@
 
 #include <linux/serial_reg.h>
 #include <mach/addr-map.h>
+#include <asm/mach-types.h>
 
 #define UART1_BASE      (APB_PHYS_BASE + 0x36000)
 #define UART2_BASE      (APB_PHYS_BASE + 0x17000)
 #define UART3_BASE      (APB_PHYS_BASE + 0x18000)
 
+static volatile unsigned long *UART = (unsigned long *)UART2_BASE;
+
 static inline void putc(char c)
 {
-        volatile unsigned long *UART = (unsigned long *)UART2_BASE;
-
         /* UART enabled? */
         if (!(UART[UART_IER] & UART_IER_UUE))
                 return;
@@ -34,8 +35,14 @@ static inline void flush(void)
 {
 }
 
+static inline void arch_decomp_setup(void)
+{
+        if (machine_is_avengers_lite())
+                UART = (unsigned long *)UART3_BASE;
+}
+
 /*
  * nothing to do
  */
-#define arch_decomp_setup()
+
 #define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/irq-mmp2.c b/arch/arm/mach-mmp/irq-mmp2.c
new file mode 100644
index 00000000000..cb18221c0af
--- /dev/null
+++ b/arch/arm/mach-mmp/irq-mmp2.c
@@ -0,0 +1,154 @@
+/*
+ *  linux/arch/arm/mach-mmp/irq-mmp2.c
+ *
+ *  Generic IRQ handling, GPIO IRQ demultiplexing, etc.
+ *
+ *  Author:     Haojian Zhuang <haojian.zhuang@marvell.com>
+ *  Copyright:  Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/regs-icu.h>
+
+#include "common.h"
+
+static void icu_mask_irq(unsigned int irq)
+{
+        uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+        r &= ~ICU_INT_ROUTE_PJ4_IRQ;
+        __raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static void icu_unmask_irq(unsigned int irq)
+{
+        uint32_t r = __raw_readl(ICU_INT_CONF(irq));
+
+        r |= ICU_INT_ROUTE_PJ4_IRQ;
+        __raw_writel(r, ICU_INT_CONF(irq));
+}
+
+static struct irq_chip icu_irq_chip = {
+        .name           = "icu_irq",
+        .mask           = icu_mask_irq,
+        .mask_ack       = icu_mask_irq,
+        .unmask         = icu_unmask_irq,
+};
+
+static void pmic_irq_ack(unsigned int irq)
+{
+        if (irq == IRQ_MMP2_PMIC)
+                mmp2_clear_pmic_int();
+}
+
+#define SECOND_IRQ_MASK(_name_, irq_base, prefix)                       \
+static void _name_##_mask_irq(unsigned int irq)                         \
+{                                                                       \
+        uint32_t r;                                                     \
+        r = __raw_readl(prefix##_MASK) | (1 << (irq - irq_base));       \
+        __raw_writel(r, prefix##_MASK);                                 \
+}
+
+#define SECOND_IRQ_UNMASK(_name_, irq_base, prefix)                     \
+static void _name_##_unmask_irq(unsigned int irq)                       \
+{                                                                       \
+        uint32_t r;                                                     \
+        r = __raw_readl(prefix##_MASK) & ~(1 << (irq - irq_base));      \
+        __raw_writel(r, prefix##_MASK);                                 \
+}
+
+#define SECOND_IRQ_DEMUX(_name_, irq_base, prefix)                      \
+static void _name_##_irq_demux(unsigned int irq, struct irq_desc *desc) \
+{                                                                       \
+        unsigned long status, mask, n;                                  \
+        mask = __raw_readl(prefix##_MASK);                              \
+        while (1) {                                                     \
+                status = __raw_readl(prefix##_STATUS) & ~mask;          \
+                if (status == 0)                                        \
+                        break;                                          \
+                n = find_first_bit(&status, BITS_PER_LONG);             \
+                while (n < BITS_PER_LONG) {                             \
+                        generic_handle_irq(irq_base + n);               \
+                        n = find_next_bit(&status, BITS_PER_LONG, n+1); \
+                }                                                       \
+        }                                                               \
+}
+
+#define SECOND_IRQ_CHIP(_name_, irq_base, prefix)                       \
+SECOND_IRQ_MASK(_name_, irq_base, prefix)                               \
+SECOND_IRQ_UNMASK(_name_, irq_base, prefix)                             \
+SECOND_IRQ_DEMUX(_name_, irq_base, prefix)                              \
+static struct irq_chip _name_##_irq_chip = {                            \
+        .name           = #_name_,                                      \
+        .mask           = _name_##_mask_irq,                            \
+        .unmask         = _name_##_unmask_irq,                          \
+}
+
+SECOND_IRQ_CHIP(pmic, IRQ_MMP2_PMIC_BASE, MMP2_ICU_INT4);
+SECOND_IRQ_CHIP(rtc,  IRQ_MMP2_RTC_BASE,  MMP2_ICU_INT5);
+SECOND_IRQ_CHIP(twsi, IRQ_MMP2_TWSI_BASE, MMP2_ICU_INT17);
+SECOND_IRQ_CHIP(misc, IRQ_MMP2_MISC_BASE, MMP2_ICU_INT35);
+SECOND_IRQ_CHIP(ssp,  IRQ_MMP2_SSP_BASE,  MMP2_ICU_INT51);
+
+static void init_mux_irq(struct irq_chip *chip, int start, int num)
+{
+        int irq;
+
+        for (irq = start; num > 0; irq++, num--) {
+                /* mask and clear the IRQ */
+                chip->mask(irq);
+                if (chip->ack)
+                        chip->ack(irq);
+
+                set_irq_chip(irq, chip);
+                set_irq_flags(irq, IRQF_VALID);
+                set_irq_handler(irq, handle_level_irq);
+        }
+}
+
+void __init mmp2_init_icu(void)
+{
+        int irq;
+
+        for (irq = 0; irq < IRQ_MMP2_MUX_BASE; irq++) {
+                icu_mask_irq(irq);
+                set_irq_chip(irq, &icu_irq_chip);
+                set_irq_flags(irq, IRQF_VALID);
+
+                switch (irq) {
+                case IRQ_MMP2_PMIC_MUX:
+                case IRQ_MMP2_RTC_MUX:
+                case IRQ_MMP2_TWSI_MUX:
+                case IRQ_MMP2_MISC_MUX:
+                case IRQ_MMP2_SSP_MUX:
+                        break;
+                default:
+                        set_irq_handler(irq, handle_level_irq);
+                        break;
+                }
+        }
+
+        /* NOTE: IRQ_MMP2_PMIC requires the PMIC MFPR register
+         * to be written to clear the interrupt
+         */
+        pmic_irq_chip.ack = pmic_irq_ack;
+
+        init_mux_irq(&pmic_irq_chip, IRQ_MMP2_PMIC_BASE, 2);
+        init_mux_irq(&rtc_irq_chip, IRQ_MMP2_RTC_BASE, 2);
+        init_mux_irq(&twsi_irq_chip, IRQ_MMP2_TWSI_BASE, 5);
+        init_mux_irq(&misc_irq_chip, IRQ_MMP2_MISC_BASE, 15);
+        init_mux_irq(&ssp_irq_chip, IRQ_MMP2_SSP_BASE, 2);
+
+        set_irq_chained_handler(IRQ_MMP2_PMIC_MUX, pmic_irq_demux);
+        set_irq_chained_handler(IRQ_MMP2_RTC_MUX, rtc_irq_demux);
+        set_irq_chained_handler(IRQ_MMP2_TWSI_MUX, twsi_irq_demux);
+        set_irq_chained_handler(IRQ_MMP2_MISC_MUX, misc_irq_demux);
+        set_irq_chained_handler(IRQ_MMP2_SSP_MUX, ssp_irq_demux);
+}
diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq-pxa168.c
index 52ff2f065eb..52ff2f065eb 100644
--- a/arch/arm/mach-mmp/irq.c
+++ b/arch/arm/mach-mmp/irq-pxa168.c
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
new file mode 100644
index 00000000000..cfd4d66ef80
--- /dev/null
+++ b/arch/arm/mach-mmp/jasper.c
@@ -0,0 +1,80 @@
+/*
+ *  linux/arch/arm/mach-mmp/jasper.c
+ *
+ *  Support for the Marvell Jasper Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+
+#include "common.h"
+
+static unsigned long jasper_pin_config[] __initdata = {
+        /* UART1 */
+        GPIO29_UART1_RXD,
+        GPIO30_UART1_TXD,
+
+        /* UART3 */
+        GPIO51_UART3_RXD,
+        GPIO52_UART3_TXD,
+
+        /* DFI */
+        GPIO168_DFI_D0,
+        GPIO167_DFI_D1,
+        GPIO166_DFI_D2,
+        GPIO165_DFI_D3,
+        GPIO107_DFI_D4,
+        GPIO106_DFI_D5,
+        GPIO105_DFI_D6,
+        GPIO104_DFI_D7,
+        GPIO111_DFI_D8,
+        GPIO164_DFI_D9,
+        GPIO163_DFI_D10,
+        GPIO162_DFI_D11,
+        GPIO161_DFI_D12,
+        GPIO110_DFI_D13,
+        GPIO109_DFI_D14,
+        GPIO108_DFI_D15,
+        GPIO143_ND_nCS0,
+        GPIO144_ND_nCS1,
+        GPIO147_ND_nWE,
+        GPIO148_ND_nRE,
+        GPIO150_ND_ALE,
+        GPIO149_ND_CLE,
+        GPIO112_ND_RDY0,
+        GPIO160_ND_RDY1,
+};
+
+static void __init jasper_init(void)
+{
+        mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
+
+        /* on-chip devices */
+        mmp2_add_uart(1);
+        mmp2_add_uart(3);
+}
+
+MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
+        .phys_io        = APB_PHYS_BASE,
+        .boot_params    = 0x00000100,
+        .io_pg_offst    = (APB_VIRT_BASE >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = mmp2_init_irq,
+        .timer          = &mmp2_timer,
+        .init_machine   = jasper_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
new file mode 100644
index 00000000000..72eb9daeea9
--- /dev/null
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -0,0 +1,123 @@
+/*
+ * linux/arch/arm/mach-mmp/mmp2.c
+ *
+ * code name MMP2
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/addr-map.h>
+#include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
+#include <mach/cputype.h>
+#include <mach/irqs.h>
+#include <mach/mfp.h>
+#include <mach/gpio.h>
+#include <mach/devices.h>
+
+#include "common.h"
+#include "clock.h"
+
+#define MFPR_VIRT_BASE  (APB_VIRT_BASE + 0x1e000)
+
+#define APMASK(i)       (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
+
+static struct mfp_addr_map mmp2_addr_map[] __initdata = {
+        MFP_ADDR(PMIC_INT, 0x2c4),
+
+        MFP_ADDR_END,
+};
+
+void mmp2_clear_pmic_int(void)
+{
+        unsigned long mfpr_pmic, data;
+
+        mfpr_pmic = APB_VIRT_BASE + 0x1e000 + 0x2c4;
+        data = __raw_readl(mfpr_pmic);
+        __raw_writel(data | (1 << 6), mfpr_pmic);
+        __raw_writel(data, mfpr_pmic);
+}
+
+static void __init mmp2_init_gpio(void)
+{
+        int i;
+
+        /* enable GPIO clock */
+        __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
+
+        /* unmask GPIO edge detection for all 6 banks -- APMASKx */
+        for (i = 0; i < 6; i++)
+                __raw_writel(0xffffffff, APMASK(i));
+
+        pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
+}
+
+void __init mmp2_init_irq(void)
+{
+        mmp2_init_icu();
+        mmp2_init_gpio();
+}
+
+/* APB peripheral clocks */
+static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
+static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
+static APBC_CLK(uart3, MMP2_UART3, 1, 26000000);
+static APBC_CLK(uart4, MMP2_UART4, 1, 26000000);
+static APBC_CLK(twsi1, MMP2_TWSI1, 0, 26000000);
+static APBC_CLK(twsi2, MMP2_TWSI2, 0, 26000000);
+static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
+static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
+static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
+static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
+
+static APMU_CLK(nand, NAND, 0xbf, 100000000);
+
+static struct clk_lookup mmp2_clkregs[] = {
+        INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
+        INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL),
+        INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL),
+        INIT_CLKREG(&clk_uart4, "pxa2xx-uart.3", NULL),
+        INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.0", NULL),
+        INIT_CLKREG(&clk_twsi2, "pxa2xx-i2c.1", NULL),
+        INIT_CLKREG(&clk_twsi3, "pxa2xx-i2c.2", NULL),
+        INIT_CLKREG(&clk_twsi4, "pxa2xx-i2c.3", NULL),
+        INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
+        INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
+        INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+};
+
+static int __init mmp2_init(void)
+{
+        if (cpu_is_mmp2()) {
+                mfp_init_base(MFPR_VIRT_BASE);
+                mfp_init_addr(mmp2_addr_map);
+                clks_register(ARRAY_AND_SIZE(mmp2_clkregs));
+        }
+
+        return 0;
+}
+postcore_initcall(mmp2_init);
+
+/* on-chip devices */
+MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
+MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
+MMP2_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4018000, 0x30, 22, 23);
+MMP2_DEVICE(uart4, "pxa2xx-uart", 3, UART4, 0xd4016000, 0x30, 18, 19);
+MMP2_DEVICE(twsi1, "pxa2xx-i2c", 0, TWSI1, 0xd4011000, 0x70);
+MMP2_DEVICE(twsi2, "pxa2xx-i2c", 1, TWSI2, 0xd4031000, 0x70);
+MMP2_DEVICE(twsi3, "pxa2xx-i2c", 2, TWSI3, 0xd4032000, 0x70);
+MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
+MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
+MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
+MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index a8400bb891e..cf75694e968 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -30,7 +30,10 @@
 
 #include <mach/addr-map.h>
 #include <mach/regs-timers.h>
+#include <mach/regs-apbc.h>
 #include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <asm/mach/time.h>
 
 #include "clock.h"
 
@@ -158,7 +161,7 @@ static void __init timer_config(void)
 
         __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
 
-        ccr &= TMR_CCR_CS_0(0x3);
+        ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
         __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
 
         /* free-running mode */
@@ -197,3 +200,24 @@ void __init timer_init(int irq)
         clocksource_register(&cksrc);
         clockevents_register_device(&ckevt);
 }
+
+static void __init mmp2_timer_init(void)
+{
+        unsigned long clk_rst;
+
+        __raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
+
+        /*
+         * enable bus/functional clock, enable 6.5MHz (divider 4),
+         * release reset
+         */
+        clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
+        __raw_writel(clk_rst, APBC_MMP2_TIMERS);
+
+        timer_init(IRQ_MMP2_TIMER1);
+}
+
+struct sys_timer mmp2_timer = {
+        .init   = mmp2_timer_init,
+};
+
diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
index 6fbe68fe441..f2d309d0619 100644
--- a/arch/arm/mach-mv78xx0/Kconfig
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -14,6 +14,12 @@ config MACH_RD78X00_MASA
           Say 'Y' here if you want your kernel to support the
           Marvell RD-78x00-mASA Reference Design.
 
+config MACH_TERASTATION_WXL
+        bool "Buffalo WLX (Terastation Duo) NAS"
+        help
+          Say 'Y' here if you want your kernel to support the
+          Buffalo WXL Nas.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
index da628b7f3bb..67a13f9bfe6 100644
--- a/arch/arm/mach-mv78xx0/Makefile
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -1,3 +1,4 @@
-obj-y                           += common.o addr-map.o irq.o pcie.o
+obj-y                           += common.o addr-map.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)   += db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA) += rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 00000000000..61e5e583603
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <mach/mv78xx0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+        .n_ports        = 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+        I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+        MPP0_GE1_TXCLK,
+        MPP1_GE1_TXCTL,
+        MPP2_GE1_RXCTL,
+        MPP3_GE1_RXCLK,
+        MPP4_GE1_TXD0,
+        MPP5_GE1_TXD1,
+        MPP6_GE1_TXD2,
+        MPP7_GE1_TXD3,
+        MPP8_GE1_RXD0,
+        MPP9_GE1_RXD1,
+        MPP10_GE1_RXD2,
+        MPP11_GE1_RXD3,
+        MPP12_GPIO,
+        MPP13_SYSRST_OUTn,
+        MPP14_SATA1_ACTn,
+        MPP15_SATA0_ACTn,
+        MPP16_GPIO,
+        MPP17_GPIO,
+        MPP18_GPIO,
+        MPP19_GPIO,
+        MPP20_GPIO,
+        MPP21_GPIO,
+        MPP22_GPIO,
+        MPP23_GPIO,
+        MPP24_UA2_TXD,
+        MPP25_UA2_RXD,
+        MPP26_UA2_CTSn,
+        MPP27_UA2_RTSn,
+        MPP28_GPIO,
+        MPP29_SYSRST_OUTn,
+        MPP30_GPIO,
+        MPP31_GPIO,
+        MPP32_GPIO,
+        MPP33_GPIO,
+        MPP34_GPIO,
+        MPP35_GPIO,
+        MPP36_GPIO,
+        MPP37_GPIO,
+        MPP38_GPIO,
+        MPP39_GPIO,
+        MPP40_UNUSED,
+        MPP41_UNUSED,
+        MPP42_UNUSED,
+        MPP43_UNUSED,
+        MPP44_UNUSED,
+        MPP45_UNUSED,
+        MPP46_UNUSED,
+        MPP47_UNUSED,
+        MPP48_SATA1_ACTn,
+        MPP49_SATA0_ACTn,
+        0
+};
+
+
+static void __init wxl_init(void)
+{
+        /*
+         * Basic MV78xx0 setup. Needs to be called early.
+         */
+        mv78xx0_init();
+        mv78xx0_mpp_conf(wxl_mpp_config);
+
+        /*
+         * Partition on-chip peripherals between the two CPU cores.
+         */
+        mv78xx0_ehci0_init();
+        mv78xx0_ehci1_init();
+        mv78xx0_ehci2_init();
+        mv78xx0_ge00_init(&db78x00_ge00_data);
+        mv78xx0_ge01_init(&db78x00_ge01_data);
+        mv78xx0_sata_init(&db78x00_sata_data);
+        mv78xx0_uart0_init();
+        mv78xx0_uart1_init();
+        mv78xx0_uart2_init();
+        mv78xx0_uart3_init();
+        mv78xx0_i2c_init();
+        i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+        if (machine_is_terastation_wxl()) {
+                /*
+                 * Assign the x16 PCIe slot on the board to CPU core
+                 * #0, and let CPU core #1 have the four x1 slots.
+                 */
+                if (mv78xx0_core_index() == 0)
+                        mv78xx0_pcie_init(0, 1);
+                else
+                        mv78xx0_pcie_init(1, 0);
+        }
+
+        return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+        /* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+        .phys_io        = MV78XX0_REGS_PHYS_BASE,
+        .io_pg_offst    = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
+        .boot_params    = 0x00000100,
+        .init_machine   = wxl_init,
+        .map_io         = mv78xx0_map_io,
+        .init_irq       = mv78xx0_init_irq,
+        .timer          = &mv78xx0_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 00000000000..354ac514eb8
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/gpio.h>
+#include <mach/hardware.h>
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+        u32 dev, rev;
+
+        mv78xx0_pcie_id(&dev, &rev);
+
+        if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+                return MPP_78100_A0_MASK;
+
+        printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+                        "(dev %#x rev %#x)\n", dev, rev);
+        return 0;
+}
+
+#define MPP_CTRL(i)     (DEV_BUS_VIRT_BASE + (i) * 4)
+#define MPP_NR_REGS     (1 + MPP_MAX/8)
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+        u32 mpp_ctrl[MPP_NR_REGS];
+        unsigned int variant_mask;
+        int i;
+
+        variant_mask = mv78xx0_variant();
+        if (!variant_mask)
+                return;
+
+        /* Initialize gpiolib. */
+        orion_gpio_init();
+
+        printk(KERN_DEBUG "initial MPP regs:");
+        for (i = 0; i < MPP_NR_REGS; i++) {
+                mpp_ctrl[i] = readl(MPP_CTRL(i));
+                printk(" %08x", mpp_ctrl[i]);
+        }
+        printk("\n");
+
+        while (*mpp_list) {
+                unsigned int num = MPP_NUM(*mpp_list);
+                unsigned int sel = MPP_SEL(*mpp_list);
+                int shift, gpio_mode;
+
+                if (num > MPP_MAX) {
+                        printk(KERN_ERR "mv78xx0_mpp_conf: invalid MPP "
+                                        "number (%u)\n", num);
+                        continue;
+                }
+                if (!(*mpp_list & variant_mask)) {
+                        printk(KERN_WARNING
+                                        "mv78xx0_mpp_conf: requested MPP%u config "
+                                        "unavailable on this hardware\n", num);
+                        continue;
+                }
+
+                shift = (num & 7) << 2;
+                mpp_ctrl[num / 8] &= ~(0xf << shift);
+                mpp_ctrl[num / 8] |= sel << shift;
+
+                gpio_mode = 0;
+                if (*mpp_list & MPP_INPUT_MASK)
+                        gpio_mode |= GPIO_INPUT_OK;
+                if (*mpp_list & MPP_OUTPUT_MASK)
+                        gpio_mode |= GPIO_OUTPUT_OK;
+                if (sel != 0)
+                        gpio_mode = 0;
+                orion_gpio_set_valid(num, gpio_mode);
+
+                mpp_list++;
+        }
+
+        printk(KERN_DEBUG "  final MPP regs:");
+        for (i = 0; i < MPP_NR_REGS; i++) {
+                writel(mpp_ctrl[i], MPP_CTRL(i));
+                printk(" %08x", mpp_ctrl[i]);
+        }
+        printk("\n");
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 00000000000..80840b781ea
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,347 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+    /* MPP number */        ((_num) & 0xff) | \
+    /* MPP select value */        (((_sel) & 0xf) << 8) | \
+    /* may be input signal */    ((!!(_in)) << 12) | \
+    /* may be output signal */    ((!!(_out)) << 13) | \
+    /* available on A0 */    ((!!(_78100_A0)) << 14))
+
+#define MPP_NUM(x)    ((x) & 0xff)
+#define MPP_SEL(x)    (((x) >> 8) & 0xf)
+
+                /*   num sel  i  o  78100_A0  */
+
+#define MPP_INPUT_MASK        MPP(0, 0x0, 1, 0, 0)
+#define MPP_OUTPUT_MASK        MPP(0, 0x0, 0, 1, 0)
+
+#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 1, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 1, 1)
+#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 1, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 1, 1)
+#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 1, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 1, 0, 1)
+#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 1, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 1, 0, 1)
+#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 1, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 1, 1)
+#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 1, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 1, 1)
+#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 1, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 1, 1)
+#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 1, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 1, 1)
+#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 1, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 1, 0, 1)
+#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 1, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 1, 0, 1)
+#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 1, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 1, 0, 1)
+#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 1, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 1, 0, 1)
+#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 1, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 1, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 1, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 1, 1)
+#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 1, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 1, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 1, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 1, 1)
+#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 1, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 1, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 1, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 1, 1)
+#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 1, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 1, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 1, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 1, 0, 1)
+#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 1, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 1, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 1, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 1, 0, 1)
+#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 1, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 1, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 1, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 1, 1)
+#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 1, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 1, 1)
+#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 1, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 1, 1)
+#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 1, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 1, 1, 0)
+#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 1, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 1, 1, 0)
+#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 1, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 1, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 1, 0, 1)
+#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 1, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 1, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 1, 1)
+#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 1, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 1, 0, 1)
+#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 1, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 1, 1)
+#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 1, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 1, 1, 1)
+#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 1, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 1, 1, 1)
+#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 1, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 1, 0, 1)
+#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 1, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 1, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 1, 1)
+#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 1, 0, 1)
+#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 1, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 1, 1)
+#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 1, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 1, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 1, 1)
+#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 1, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 1, 1)
+#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 1, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 1, 1)
+#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 1, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 1, 1)
+#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 1, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 1, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 1, 1)
+#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 1, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 1, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 1, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 1, 1)
+#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 1, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 1, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 1, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 1, 1)
+#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 1, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 1, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 1, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 1, 0, 1)
+#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 1, 0, 1)
+#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 1, 1)
+#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 1, 1, 1)
+#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 1, 1, 1)
+#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 1, 0, 1)
+#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 1, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 1, 1)
+#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 1, 1)
+#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 1, 1)
+#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 1, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 1, 0, 1)
+#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX            49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mx1/Makefile b/arch/arm/mach-mx1/Makefile
index 7f86fe073ec..fc2ddf82441 100644
--- a/arch/arm/mach-mx1/Makefile
+++ b/arch/arm/mach-mx1/Makefile
@@ -4,11 +4,12 @@
 
 # Object file lists.
 
+EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-y                   += generic.o clock.o devices.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mach-mx1ads.c
index 30f04e56faf..51f3cfd83db 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mach-mx1ads.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
  *
  * Initially based on:
  *      linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 #include <mach/irqs.h>
 
 #include "devices.h"
@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
         /* Maintainer: Sascha Hauer, Pengutronix */
         .phys_io        = IMX_IO_PHYS,
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .boot_params    = MX1_PHYS_OFFSET + 0x100,
         .map_io         = mx1_map_io,
         .init_irq       = mx1_init_irq,
         .timer          = &mx1ads_timer,
@@ -157,7 +157,7 @@ MACHINE_END
 MACHINE_START(MXLADS, "Freescale MXLADS")
         .phys_io        = IMX_IO_PHYS,
         .io_pg_offst    = (IMX_IO_BASE >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .boot_params    = MX1_PHYS_OFFSET + 0x100,
         .map_io         = mx1_map_io,
         .init_irq       = mx1_init_irq,
         .timer          = &mx1ads_timer,
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/mach-scb9328.c
index 325d98df605..7587a7a1246 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/mach-scb9328.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
  *
  * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
  * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
@@ -23,7 +23,7 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx1.h>
 
 #include "devices.h"
 
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index b96c6a38936..742fd4e6dcb 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -37,6 +37,7 @@ config MACH_MX27ADS
 config MACH_PCM038
         bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
         depends on MACH_MX27
+        select MXC_ULPI if USB_ULPI
         help
           Include support for phyCORE-i.MX27 (aka pcm038) platform. This
           includes specific configurations for the module and its peripherals.
@@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
         bool "Eukrea CPUIMX27 module"
         depends on MACH_MX27
         help
@@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
         bool "CPUIMX27 integrates SDHC2 module"
-        depends on MACH_EUKREA_CPUIMX27
+        depends on MACH_CPUIMX27
         help
           This adds support for the internal SDHC2 used on CPUIMX27 used
           for wifi or eMMC.
 
 choice
         prompt "Baseboard"
-        depends on MACH_EUKREA_CPUIMX27
+        depends on MACH_CPUIMX27
         default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +91,7 @@ config MACH_MX27_3DS
           Include support for MX27PDK platform. This includes specific
           configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
         bool "LogicPD MX27 LITEKIT platform"
         depends on MACH_MX27
         help
@@ -100,6 +101,7 @@ config MACH_MX27LITE
 config MACH_PCA100
         bool "Phytec phyCARD-s (pca100)"
         depends on MACH_MX27
+        select MXC_ULPI if USB_ULPI
         help
           Include support for phyCARD-s (aka pca100) platform. This
           includes specific configurations for the module and its peripherals.
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 52aca0aaf9b..e3254faac82 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -4,21 +4,20 @@
 
 # Object file lists.
 
-obj-y   :=  generic.o devices.o serial.o
+obj-y   :=  devices.o serial.o
 
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o
+obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 91901b5d56c..8974faf9cef 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)        (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR                IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0              IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1              IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0              IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1              IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL           IO_ADDR_CCM(0x14)
+#define CCM_PCDR0               IO_ADDR_CCM(0x18)
+#define CCM_PCDR1               IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0               IO_ADDR_CCM(0x20)
+#define CCM_PCCR1               IO_ADDR_CCM(0x24)
+#define CCM_CCSR                IO_ADDR_CCM(0x28)
+#define CCM_PMCTL               IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT             IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL             IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET   29
+#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET     26
+#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET      24
+#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES        (1 << 22)
+#define CCM_CSCR_MPLLRES        (1 << 21)
+#define CCM_CSCR_SSI2_OFFSET    20
+#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET    19
+#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET     18
+#define CCM_CSCR_FIR            (1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP             (1 << 17)
+#define CCM_CSCR_MCU            (1 << 16)
+#define CCM_CSCR_BCLK_OFFSET    10
+#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET   9
+#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV      (1 << 4)
+#define CCM_CSCR_OSC26M         (1 << 3)
+#define CCM_CSCR_FPM            (1 << 2)
+#define CCM_CSCR_SPEN           (1 << 1)
+#define CCM_CSCR_MPEN           1
+
+#define CCM_MPCTL0_CPLM         (1 << 31)
+#define CCM_MPCTL0_PD_OFFSET    26
+#define CCM_MPCTL0_PD_MASK      (0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET   16
+#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET   10
+#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET   0
+#define CCM_MPCTL0_MFN_MASK     0x3ff
+
+#define CCM_MPCTL1_LF           (1 << 15)
+#define CCM_MPCTL1_BRMO         (1 << 6)
+
+#define CCM_SPCTL0_CPLM         (1 << 31)
+#define CCM_SPCTL0_PD_OFFSET    26
+#define CCM_SPCTL0_PD_MASK      (0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET   16
+#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET   10
+#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET   0
+#define CCM_SPCTL0_MFN_MASK     0x3ff
+
+#define CCM_SPCTL1_LF           (1 << 15)
+#define CCM_SPCTL1_BRMO         (1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET       16
+#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET        8
+#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET    0
+#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET         12
+#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET         5
+#define CCM_PCDR0_48MDIV_MASK           (0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET        0
+#define CCM_PCDR0_FIRIDIV_MASK          0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET        24
+#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET        16
+#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET        8
+#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET        0
+#define CCM_PCDR1_PERDIV1_MASK          0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET        31
+#define CCM_PCCR_HCLK_CSI_REG           CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET        30
+#define CCM_PCCR_HCLK_DMA_REG           CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET       28
+#define CCM_PCCR_HCLK_BROM_REG          CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET       27
+#define CCM_PCCR_HCLK_EMMA_REG          CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET       26
+#define CCM_PCCR_HCLK_LCDC_REG          CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET      25
+#define CCM_PCCR_HCLK_SLCDC_REG         CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET     24
+#define CCM_PCCR_HCLK_USBOTG_REG        CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET        23
+#define CCM_PCCR_BMI_MASK               (1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG           CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET         22
+#define CCM_PCCR_PERCLK4_REG            CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET           21
+#define CCM_PCCR_SLCDC_REG              CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET       20
+#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG          CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET             19
+#define CCM_PCCR_NFC_REG                CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET            18
+#define CCM_PCCR_LCDC_REG               CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET       17
+#define CCM_PCCR_SSI1_BAUD_REG          CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET       16
+#define CCM_PCCR_SSI2_BAUD_REG          CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET            15
+#define CCM_PCCR_EMMA_REG               CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET          14
+#define CCM_PCCR_USBOTG_REG             CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET             13
+#define CCM_PCCR_DMA_REG                CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET            12
+#define CCM_PCCR_I2C1_REG               CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET            11
+#define CCM_PCCR_GPIO_REG               CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET           10
+#define CCM_PCCR_SDHC2_REG              CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET           9
+#define CCM_PCCR_SDHC1_REG              CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET            8
+#define CCM_PCCR_FIRI_MASK              (1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG               CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET        7
+#define CCM_PCCR_SSI2_REG               CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET        6
+#define CCM_PCCR_SSI1_REG               CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET           5
+#define CCM_PCCR_CSPI2_REG              CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET           4
+#define CCM_PCCR_CSPI1_REG              CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET           3
+#define CCM_PCCR_UART4_REG              CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET           2
+#define CCM_PCCR_UART3_REG              CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET           1
+#define CCM_PCCR_UART2_REG              CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET           0
+#define CCM_PCCR_UART1_REG              CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET           31
+#define CCM_PCCR_OWIRE_REG              CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET             30
+#define CCM_PCCR_KPP_REG                CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET             29
+#define CCM_PCCR_RTC_REG                CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET             28
+#define CCM_PCCR_PWM_REG                CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET            27
+#define CCM_PCCR_GPT3_REG               CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET            26
+#define CCM_PCCR_GPT2_REG               CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET            25
+#define CCM_PCCR_GPT1_REG               CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET             24
+#define CCM_PCCR_WDT_REG                CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET           23
+#define CCM_PCCR_CSPI3_REG              CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK             (1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK             (1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK             (1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK               (1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK              (1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK              (1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK              (1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK              (1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK              (1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK         (1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK          (1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK          (1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK         (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK         (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK        (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK       (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK              (1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK               (1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK              (1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK               (1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK             (1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK           (1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK               (1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK               (1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK             (1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK             (1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK             (1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK         (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK          (1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK         (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK          (1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK             (1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK             (1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK             (1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK             (1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK            (1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK               (1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR          (1 << 15)
+
+#define CCM_CCSR_CLKMODE1       (1 << 9)
+#define CCM_CCSR_CLKMODE0       (1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK   0x1f
+
+#define SYS_FMCR                0x14    /* Functional Muxing Control Reg */
+#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
         clk_enable(&uart_clk[0]);
 #endif
 
-        mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+        mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+                        MX21_INT_GPT1);
         return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index b010bf9ceaa..68bf93e6e90 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)        (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR                IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0              IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1              IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0              IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1              IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL           IO_ADDR_CCM(0x14)
+#define CCM_PCDR0               IO_ADDR_CCM(0x18)
+#define CCM_PCDR1               IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0               IO_ADDR_CCM(0x20)
+#define CCM_PCCR1               IO_ADDR_CCM(0x24)
+#define CCM_CCSR                IO_ADDR_CCM(0x28)
+#define CCM_PMCTL               IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT             IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL             IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS     (1 << 31)
 #define CCM_CSCR_SSI2           (1 << 23)
@@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
         clk_enable(&uart1_clk);
 #endif
 
-        mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+        mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+                        MX27_INT_GPT1);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d9e3bf9644c..d8d3b2d84dc 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
          * the silicon revision very early we read it here to
          * avoid any further hooks
         */
-        val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+        val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+                                + SYS_CHIP_ID));
 
         cpu_silicon_rev = (int)(val >> 28);
         cpu_partnumber = (int)((val >> 12) & 0xFFFF);
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
deleted file mode 100644
index 749de76b3f9..00000000000
--- a/arch/arm/mach-mx2/crm_regs.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET   29
-#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES        (1 << 22)
-#define CCM_CSCR_MPLLRES        (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET    20
-#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET    19
-#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET     18
-#define CCM_CSCR_FIR            (1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET    10
-#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET   9
-#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET         5
-#define CCM_PCDR0_48MDIV_MASK           (0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET        0
-#define CCM_PCDR0_FIRIDIV_MASK          0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET        31
-#define CCM_PCCR_HCLK_CSI_REG           CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET        30
-#define CCM_PCCR_HCLK_DMA_REG           CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET       28
-#define CCM_PCCR_HCLK_BROM_REG          CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET       27
-#define CCM_PCCR_HCLK_EMMA_REG          CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET       26
-#define CCM_PCCR_HCLK_LCDC_REG          CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET      25
-#define CCM_PCCR_HCLK_SLCDC_REG         CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET     24
-#define CCM_PCCR_HCLK_USBOTG_REG        CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET        23
-#define CCM_PCCR_BMI_MASK               (1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG           CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET         22
-#define CCM_PCCR_PERCLK4_REG            CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET           21
-#define CCM_PCCR_SLCDC_REG              CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET       20
-#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG          CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET             19
-#define CCM_PCCR_NFC_REG                CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET            18
-#define CCM_PCCR_LCDC_REG               CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET       17
-#define CCM_PCCR_SSI1_BAUD_REG          CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET       16
-#define CCM_PCCR_SSI2_BAUD_REG          CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET            15
-#define CCM_PCCR_EMMA_REG               CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET          14
-#define CCM_PCCR_USBOTG_REG             CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET             13
-#define CCM_PCCR_DMA_REG                CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET            12
-#define CCM_PCCR_I2C1_REG               CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET            11
-#define CCM_PCCR_GPIO_REG               CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET           10
-#define CCM_PCCR_SDHC2_REG              CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET           9
-#define CCM_PCCR_SDHC1_REG              CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET            8
-#define CCM_PCCR_FIRI_MASK              (1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG               CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET        7
-#define CCM_PCCR_SSI2_REG               CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET        6
-#define CCM_PCCR_SSI1_REG               CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET           5
-#define CCM_PCCR_CSPI2_REG              CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET           4
-#define CCM_PCCR_CSPI1_REG              CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET           3
-#define CCM_PCCR_UART4_REG              CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET           2
-#define CCM_PCCR_UART3_REG              CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET           1
-#define CCM_PCCR_UART2_REG              CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET           0
-#define CCM_PCCR_UART1_REG              CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET           31
-#define CCM_PCCR_OWIRE_REG              CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET             30
-#define CCM_PCCR_KPP_REG                CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET             29
-#define CCM_PCCR_RTC_REG                CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET             28
-#define CCM_PCCR_PWM_REG                CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET            27
-#define CCM_PCCR_GPT3_REG               CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET            26
-#define CCM_PCCR_GPT2_REG               CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET            25
-#define CCM_PCCR_GPT1_REG               CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET             24
-#define CCM_PCCR_WDT_REG                CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET           23
-#define CCM_PCCR_CSPI3_REG              CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK             (1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK             (1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK             (1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK               (1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK              (1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK              (1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK              (1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK              (1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK              (1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK         (1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK          (1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK          (1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK         (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK         (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK        (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK       (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK              (1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK               (1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK              (1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK               (1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK             (1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK           (1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK               (1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK               (1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK             (1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK             (1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK             (1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK         (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK          (1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK         (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK          (1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK             (1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK             (1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK             (1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK             (1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK            (1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK               (1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR          (1 << 15)
-
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14    /*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 3d398ce09b3..a4b809b82fa 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -46,65 +46,31 @@
  * - i.MX21: 2 channel
  * - i.MX27: 3 channel
  */
-static struct resource mxc_spi_resources0[] = {
-        {
-               .start = CSPI1_BASE_ADDR,
-               .end = CSPI1_BASE_ADDR + SZ_4K - 1,
-               .flags = IORESOURCE_MEM,
-        }, {
-               .start = MXC_INT_CSPI1,
-               .end = MXC_INT_CSPI1,
-               .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct resource mxc_spi_resources1[] = {
-        {
-                .start = CSPI2_BASE_ADDR,
-                .end = CSPI2_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_CSPI2,
-                .end = MXC_INT_CSPI2,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_spi_resources2[] = {
-        {
-                .start = CSPI3_BASE_ADDR,
-                .end = CSPI3_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_CSPI3,
-                .end = MXC_INT_CSPI3,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-#endif
-
-struct platform_device mxc_spi_device0 = {
-        .name = "spi_imx",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources0),
-        .resource = mxc_spi_resources0,
-};
+#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)                                 \
+        static struct resource mxc_spi_resources ## n[] = {                     \
+                {                                                               \
+                        .start = baseaddr,                                      \
+                        .end = baseaddr + SZ_4K - 1,                            \
+                        .flags = IORESOURCE_MEM,                                \
+                }, {                                                            \
+                        .start = irq,                                           \
+                        .end = irq,                                             \
+                        .flags = IORESOURCE_IRQ,                                \
+                },                                                              \
+        };                                                                      \
+                                                                                \
+        struct platform_device mxc_spi_device ## n = {                          \
+                .name = "spi_imx",                                              \
+                .id = n,                                                        \
+                .num_resources = ARRAY_SIZE(mxc_spi_resources ## n),            \
+                .resource = mxc_spi_resources ## n,                             \
+        }
 
-struct platform_device mxc_spi_device1 = {
-        .name = "spi_imx",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources1),
-        .resource = mxc_spi_resources1,
-};
+DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
+DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
 
 #ifdef CONFIG_MACH_MX27
-struct platform_device mxc_spi_device2 = {
-        .name = "spi_imx",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(mxc_spi_resources2),
-        .resource = mxc_spi_resources2,
-};
+DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
 #endif
 
 /*
@@ -112,104 +78,34 @@ struct platform_device mxc_spi_device2 = {
  * - i.MX21: 3 timers
  * - i.MX27: 6 timers
  */
-
-/* We use gpt0 as system timer, so do not add a device for this one */
-
-static struct resource timer1_resources[] = {
-        {
-                .start  = GPT2_BASE_ADDR,
-                .end    = GPT2_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start   = MXC_INT_GPT2,
-                .end     = MXC_INT_GPT2,
-                .flags   = IORESOURCE_IRQ,
+#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)                         \
+        static struct resource timer ## n ##_resources[] = {            \
+                {                                                       \
+                        .start = baseaddr,                              \
+                        .end = baseaddr + SZ_4K - 1,                    \
+                        .flags = IORESOURCE_MEM,                        \
+                }, {                                                    \
+                        .start = irq,                                   \
+                        .end = irq,                                     \
+                        .flags = IORESOURCE_IRQ,                        \
+                }                                                       \
+        };                                                              \
+                                                                        \
+        struct platform_device mxc_gpt ## n = {                         \
+                .name = "imx_gpt",                                      \
+                .id = n,                                                \
+                .num_resources = ARRAY_SIZE(timer ## n ## _resources),  \
+                .resource = timer ## n ## _resources,                   \
         }
-};
-
-struct platform_device mxc_gpt1 = {
-        .name = "imx_gpt",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(timer1_resources),
-        .resource = timer1_resources,
-};
 
-static struct resource timer2_resources[] = {
-        {
-                .start  = GPT3_BASE_ADDR,
-                .end    = GPT3_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start   = MXC_INT_GPT3,
-                .end     = MXC_INT_GPT3,
-                .flags   = IORESOURCE_IRQ,
-        }
-};
-
-struct platform_device mxc_gpt2 = {
-        .name = "imx_gpt",
-        .id = 2,
-        .num_resources = ARRAY_SIZE(timer2_resources),
-        .resource = timer2_resources,
-};
+/* We use gpt1 as system timer, so do not add a device for this one */
+DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
+DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource timer3_resources[] = {
-        {
-                .start  = GPT4_BASE_ADDR,
-                .end    = GPT4_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start   = MXC_INT_GPT4,
-                .end     = MXC_INT_GPT4,
-                .flags   = IORESOURCE_IRQ,
-        }
-};
-
-struct platform_device mxc_gpt3 = {
-        .name = "imx_gpt",
-        .id = 3,
-        .num_resources = ARRAY_SIZE(timer3_resources),
-        .resource = timer3_resources,
-};
-
-static struct resource timer4_resources[] = {
-        {
-                .start  = GPT5_BASE_ADDR,
-                .end    = GPT5_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start   = MXC_INT_GPT5,
-                .end     = MXC_INT_GPT5,
-                .flags   = IORESOURCE_IRQ,
-        }
-};
-
-struct platform_device mxc_gpt4 = {
-        .name = "imx_gpt",
-        .id = 4,
-        .num_resources = ARRAY_SIZE(timer4_resources),
-        .resource = timer4_resources,
-};
-
-static struct resource timer5_resources[] = {
-        {
-                .start  = GPT6_BASE_ADDR,
-                .end    = GPT6_BASE_ADDR + 0x17,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start   = MXC_INT_GPT6,
-                .end     = MXC_INT_GPT6,
-                .flags   = IORESOURCE_IRQ,
-        }
-};
-
-struct platform_device mxc_gpt5 = {
-        .name = "imx_gpt",
-        .id = 5,
-        .num_resources = ARRAY_SIZE(timer5_resources),
-        .resource = timer5_resources,
-};
+DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
+DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
+DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
 #endif
 
 /*
@@ -220,9 +116,9 @@ struct platform_device mxc_gpt5 = {
  */
 static struct resource mxc_wdt_resources[] = {
         {
-                .start  = WDOG_BASE_ADDR,
-                .end    = WDOG_BASE_ADDR + 0x30,
-                .flags  = IORESOURCE_MEM,
+                .start = MX2x_WDOG_BASE_ADDR,
+                .end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
         },
 };
 
@@ -235,8 +131,8 @@ struct platform_device mxc_wdt = {
 
 static struct resource mxc_w1_master_resources[] = {
         {
-                .start = OWIRE_BASE_ADDR,
-                .end   = OWIRE_BASE_ADDR + SZ_4K - 1,
+                .start = MX2x_OWIRE_BASE_ADDR,
+                .end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
                 .flags = IORESOURCE_MEM,
         },
 };
@@ -248,24 +144,33 @@ struct platform_device mxc_w1_master_device = {
         .resource = mxc_w1_master_resources,
 };
 
-static struct resource mxc_nand_resources[] = {
-        {
-                .start  = NFC_BASE_ADDR,
-                .end    = NFC_BASE_ADDR + 0xfff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_NANDFC,
-                .end    = MXC_INT_NANDFC,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
+#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)                      \
+        static struct resource pfx ## _nand_resources[] = {             \
+                {                                                       \
+                        .start = baseaddr,                              \
+                        .end = baseaddr + SZ_4K - 1,                    \
+                        .flags = IORESOURCE_MEM,                        \
+                }, {                                                    \
+                        .start = irq,                                   \
+                        .end = irq,                                     \
+                        .flags = IORESOURCE_IRQ,                        \
+                },                                                      \
+        };                                                              \
+                                                                        \
+        struct platform_device pfx ## _nand_device = {                  \
+                .name = "mxc_nand",                                     \
+                .id = 0,                                                \
+                .num_resources = ARRAY_SIZE(pfx ## _nand_resources),    \
+                .resource = pfx ## _nand_resources,                     \
+        }
 
-struct platform_device mxc_nand_device = {
-        .name = "mxc_nand",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_nand_resources),
-        .resource = mxc_nand_resources,
-};
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
+#endif
 
 /*
  * lcdc:
@@ -275,12 +180,12 @@ struct platform_device mxc_nand_device = {
  */
 static struct resource mxc_fb[] = {
         {
-                .start = LCDC_BASE_ADDR,
-                .end   = LCDC_BASE_ADDR + 0xFFF,
+                .start = MX2x_LCDC_BASE_ADDR,
+                .end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_LCDC,
-                .end   = MXC_INT_LCDC,
+                .start = MX2x_INT_LCDC,
+                .end = MX2x_INT_LCDC,
                 .flags = IORESOURCE_IRQ,
         }
 };
@@ -299,13 +204,13 @@ struct platform_device mxc_fb_device = {
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_fec_resources[] = {
         {
-                .start  = FEC_BASE_ADDR,
-                .end    = FEC_BASE_ADDR + 0xfff,
-                .flags  = IORESOURCE_MEM,
+                .start = MX27_FEC_BASE_ADDR,
+                .end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
         }, {
-                .start  = MXC_INT_FEC,
-                .end    = MXC_INT_FEC,
-                .flags  = IORESOURCE_IRQ,
+                .start = MX27_INT_FEC,
+                .end = MX27_INT_FEC,
+                .flags = IORESOURCE_IRQ,
         },
 };
 
@@ -317,55 +222,41 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
-static struct resource mxc_i2c_1_resources[] = {
-        {
-                .start  = I2C_BASE_ADDR,
-                .end    = I2C_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_I2C,
-                .end    = MXC_INT_I2C,
-                .flags  = IORESOURCE_IRQ,
+#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)                         \
+        static struct resource mxc_i2c_resources ## n[] = {             \
+                {                                                       \
+                        .start = baseaddr,                              \
+                        .end = baseaddr + SZ_4K - 1,                    \
+                        .flags = IORESOURCE_MEM,                        \
+                }, {                                                    \
+                        .start = irq,                                   \
+                        .end = irq,                                     \
+                        .flags = IORESOURCE_IRQ,                        \
+                }                                                       \
+        };                                                              \
+                                                                        \
+        struct platform_device mxc_i2c_device ## n = {                  \
+                .name = "imx-i2c",                                      \
+                .id = n,                                                \
+                .num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),    \
+                .resource = mxc_i2c_resources ## n,                     \
         }
-};
 
-struct platform_device mxc_i2c_device0 = {
-        .name = "imx-i2c",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-        .resource = mxc_i2c_1_resources,
-};
+DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
 
 #ifdef CONFIG_MACH_MX27
-static struct resource mxc_i2c_2_resources[] = {
-        {
-                .start  = I2C2_BASE_ADDR,
-                .end    = I2C2_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_I2C2,
-                .end    = MXC_INT_I2C2,
-                .flags  = IORESOURCE_IRQ,
-        }
-};
-
-struct platform_device mxc_i2c_device1 = {
-        .name = "imx-i2c",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-        .resource = mxc_i2c_2_resources,
-};
+DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
 #endif
 
 static struct resource mxc_pwm_resources[] = {
         {
-                .start  = PWM_BASE_ADDR,
-                .end    = PWM_BASE_ADDR + 0x0fff,
-                .flags  = IORESOURCE_MEM,
+                .start = MX2x_PWM_BASE_ADDR,
+                .end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
         }, {
-                .start   = MXC_INT_PWM,
-                .end     = MXC_INT_PWM,
-                .flags   = IORESOURCE_IRQ,
+                .start = MX2x_INT_PWM,
+                .end = MX2x_INT_PWM,
+                .flags = IORESOURCE_IRQ,
         }
 };
 
@@ -379,74 +270,49 @@ struct platform_device mxc_pwm_device = {
 /*
  * Resource definition for the MXC SDHC
  */
-static struct resource mxc_sdhc1_resources[] = {
-        {
-                .start = SDHC1_BASE_ADDR,
-                .end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_SDHC1,
-                .end   = MXC_INT_SDHC1,
-                .flags = IORESOURCE_IRQ,
-        }, {
-                .start  = DMA_REQ_SDHC1,
-                .end    = DMA_REQ_SDHC1,
-                .flags  = IORESOURCE_DMA,
-        },
-};
-
-static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
-
-struct platform_device mxc_sdhc_device0 = {
-       .name           = "mxc-mmc",
-       .id             = 0,
-       .dev            = {
-               .dma_mask = &mxc_sdhc1_dmamask,
-               .coherent_dma_mask = 0xffffffff,
-       },
-       .num_resources  = ARRAY_SIZE(mxc_sdhc1_resources),
-       .resource       = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_sdhc2_resources[] = {
-        {
-                .start = SDHC2_BASE_ADDR,
-                .end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = MXC_INT_SDHC2,
-                .end   = MXC_INT_SDHC2,
-                .flags = IORESOURCE_IRQ,
-        }, {
-                .start  = DMA_REQ_SDHC2,
-                .end    = DMA_REQ_SDHC2,
-                .flags  = IORESOURCE_DMA,
-        },
-};
+#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)                 \
+        static struct resource mxc_sdhc_resources ## n[] = {            \
+                {                                                       \
+                        .start = baseaddr,                              \
+                        .end = baseaddr + SZ_4K - 1,                    \
+                        .flags = IORESOURCE_MEM,                        \
+                }, {                                                    \
+                        .start = irq,                                   \
+                        .end = irq,                                     \
+                        .flags = IORESOURCE_IRQ,                        \
+                }, {                                                    \
+                        .start = dmareq,                                \
+                        .end = dmareq,                                  \
+                        .flags = IORESOURCE_DMA,                        \
+                },                                                      \
+        };                                                              \
+                                                                        \
+        static u64 mxc_sdhc ## n ## _dmamask = 0xffffffffUL;            \
+                                                                        \
+        struct platform_device mxc_sdhc_device ## n = {                 \
+                .name = "mxc-mmc",                                      \
+                .id = n,                                                \
+                .dev = {                                                \
+                        .dma_mask = &mxc_sdhc ## n ## _dmamask,         \
+                        .coherent_dma_mask = 0xffffffff,                \
+                },                                                      \
+                .num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),   \
+                .resource = mxc_sdhc_resources ## n,            \
+        }
 
-static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
-
-struct platform_device mxc_sdhc_device1 = {
-       .name           = "mxc-mmc",
-       .id             = 1,
-       .dev            = {
-               .dma_mask = &mxc_sdhc2_dmamask,
-               .coherent_dma_mask = 0xffffffff,
-       },
-       .num_resources  = ARRAY_SIZE(mxc_sdhc2_resources),
-       .resource       = mxc_sdhc2_resources,
-};
+DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
+DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
 
 #ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
         {
-                .start  = OTG_BASE_ADDR,
-                .end    = OTG_BASE_ADDR + 0x1ff,
-                .flags  = IORESOURCE_MEM,
+                .start = MX27_USBOTG_BASE_ADDR,
+                .end = MX27_USBOTG_BASE_ADDR + 0x1ff,
+                .flags = IORESOURCE_MEM,
         }, {
-                .start  = MXC_INT_USB3,
-                .end    = MXC_INT_USB3,
-                .flags  = IORESOURCE_IRQ,
+                .start = MX27_INT_USB3,
+                .end = MX27_INT_USB3,
+                .flags = IORESOURCE_IRQ,
         },
 };
 
@@ -454,14 +320,14 @@ static u64 otg_dmamask = 0xffffffffUL;
 
 /* OTG gadget device */
 struct platform_device mxc_otg_udc_device = {
-        .name           = "fsl-usb2-udc",
-        .id             = -1,
-        .dev            = {
-                .dma_mask               = &otg_dmamask,
-                .coherent_dma_mask      = 0xffffffffUL,
+        .name = "fsl-usb2-udc",
+        .id = -1,
+        .dev = {
+                .dma_mask = &otg_dmamask,
+                .coherent_dma_mask = 0xffffffffUL,
         },
-        .resource       = otg_resources,
-        .num_resources  = ARRAY_SIZE(otg_resources),
+        .resource = otg_resources,
+        .num_resources = ARRAY_SIZE(otg_resources),
 };
 
 /* OTG host */
@@ -482,12 +348,12 @@ static u64 usbh1_dmamask = 0xffffffffUL;
 
 static struct resource mxc_usbh1_resources[] = {
         {
-                .start = OTG_BASE_ADDR + 0x200,
-                .end = OTG_BASE_ADDR + 0x3ff,
+                .start = MX27_USBOTG_BASE_ADDR + 0x200,
+                .end = MX27_USBOTG_BASE_ADDR + 0x3ff,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_USB1,
-                .end = MXC_INT_USB1,
+                .start = MX27_INT_USB1,
+                .end = MX27_INT_USB1,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -508,12 +374,12 @@ static u64 usbh2_dmamask = 0xffffffffUL;
 
 static struct resource mxc_usbh2_resources[] = {
         {
-                .start = OTG_BASE_ADDR + 0x400,
-                .end = OTG_BASE_ADDR + 0x5ff,
+                .start = MX27_USBOTG_BASE_ADDR + 0x400,
+                .end = MX27_USBOTG_BASE_ADDR + 0x5ff,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_USB2,
-                .end = MXC_INT_USB2,
+                .start = MX27_INT_USB2,
+                .end = MX27_INT_USB2,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -530,115 +396,88 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
-static struct resource imx_ssi_resources0[] = {
-        {
-                .start  = SSI1_BASE_ADDR,
-                .end    = SSI1_BASE_ADDR + 0x6F,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_SSI1,
-                .end    = MXC_INT_SSI1,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .name   = "tx0",
-                .start  = DMA_REQ_SSI1_TX0,
-                .end    = DMA_REQ_SSI1_TX0,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "rx0",
-                .start  = DMA_REQ_SSI1_RX0,
-                .end    = DMA_REQ_SSI1_RX0,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "tx1",
-                .start  = DMA_REQ_SSI1_TX1,
-                .end    = DMA_REQ_SSI1_TX1,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "rx1",
-                .start  = DMA_REQ_SSI1_RX1,
-                .end    = DMA_REQ_SSI1_RX1,
-                .flags  = IORESOURCE_DMA,
-        },
-};
-
-static struct resource imx_ssi_resources1[] = {
-        {
-                .start  = SSI2_BASE_ADDR,
-                .end    = SSI2_BASE_ADDR + 0x6F,
-                .flags  = IORESOURCE_MEM,
-        }, {
-                .start  = MXC_INT_SSI2,
-                .end    = MXC_INT_SSI2,
-                .flags  = IORESOURCE_IRQ,
-        }, {
-                .name   = "tx0",
-                .start  = DMA_REQ_SSI2_TX0,
-                .end    = DMA_REQ_SSI2_TX0,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "rx0",
-                .start  = DMA_REQ_SSI2_RX0,
-                .end    = DMA_REQ_SSI2_RX0,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "tx1",
-                .start  = DMA_REQ_SSI2_TX1,
-                .end    = DMA_REQ_SSI2_TX1,
-                .flags  = IORESOURCE_DMA,
-        }, {
-                .name   = "rx1",
-                .start  = DMA_REQ_SSI2_RX1,
-                .end    = DMA_REQ_SSI2_RX1,
-                .flags  = IORESOURCE_DMA,
-        },
-};
+#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)                      \
+        {                                                               \
+                .name = _name,                                          \
+                .start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,       \
+                .end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,         \
+                .flags = IORESOURCE_DMA,                                \
+        }
 
-struct platform_device imx_ssi_device0 = {
-        .name = "imx-ssi",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(imx_ssi_resources0),
-        .resource = imx_ssi_resources0,
-};
+#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)                   \
+        static struct resource imx_ssi_resources ## n[] = {             \
+                {                                                       \
+                        .start = MX2x_SSI ## ssin ## _BASE_ADDR,        \
+                        .end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,   \
+                        .flags = IORESOURCE_MEM,                        \
+                }, {                                                    \
+                        .start = MX2x_INT_SSI1,                         \
+                        .end = MX2x_INT_SSI1,                           \
+                        .flags = IORESOURCE_IRQ,                        \
+                },                                                      \
+                DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),                \
+                DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),                \
+                DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),                \
+                DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),                \
+        };                                                              \
+                                                                        \
+        struct platform_device imx_ssi_device ## n = {                  \
+                .name = "imx-ssi",                                      \
+                .id = n,                                                \
+                .num_resources = ARRAY_SIZE(imx_ssi_resources ## n),    \
+                .resource = imx_ssi_resources ## n,                     \
+        }
 
-struct platform_device imx_ssi_device1 = {
-        .name = "imx-ssi",
-        .id = 1,
-        .num_resources = ARRAY_SIZE(imx_ssi_resources1),
-        .resource = imx_ssi_resources1,
-};
+DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
+DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
 
 /* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-        {
-                .chip.label = "gpio-0",
-                .irq = MXC_INT_GPIO,
-                .base = IO_ADDRESS(GPIO_BASE_ADDR),
-                .virtual_irq_start = MXC_GPIO_IRQ_START,
-        }, {
-                .chip.label = "gpio-1",
-                .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-        }, {
-                .chip.label = "gpio-2",
-                .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-        }, {
-                .chip.label = "gpio-3",
-                .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-        }, {
-                .chip.label = "gpio-4",
-                .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-        }, {
-                .chip.label = "gpio-5",
-                .base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
-                .virtual_irq_start = MXC_GPIO_IRQ_START + 160,
+#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)                          \
+        {                                                               \
+                .chip.label = "gpio-" #n,                               \
+                .irq = _irq,                                            \
+                .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +        \
+                                n * 0x100),                             \
+                .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,       \
         }
-};
+
+#define DEFINE_MXC_GPIO_PORT(SOC, n)                                    \
+        {                                                               \
+                .chip.label = "gpio-" #n,                               \
+                .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +        \
+                                n * 0x100),                             \
+                .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,       \
+        }
+
+#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)                                 \
+        static struct mxc_gpio_port pfx ## _gpio_ports[] = {            \
+                DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),     \
+                DEFINE_MXC_GPIO_PORT(SOC, 1),                           \
+                DEFINE_MXC_GPIO_PORT(SOC, 2),                           \
+                DEFINE_MXC_GPIO_PORT(SOC, 3),                           \
+                DEFINE_MXC_GPIO_PORT(SOC, 4),                           \
+                DEFINE_MXC_GPIO_PORT(SOC, 5),                           \
+        }
+
+#ifdef CONFIG_MACH_MX21
+DEFINE_MXC_GPIO_PORTS(MX21, imx21);
+#endif
+
+#ifdef CONFIG_MACH_MX27
+DEFINE_MXC_GPIO_PORTS(MX27, imx27);
+#endif
 
 int __init mxc_register_gpios(void)
 {
-        return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+#ifdef CONFIG_MACH_MX21
+        if (cpu_is_mx21())
+                return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
+        else
+#endif
+#ifdef CONFIG_MACH_MX27
+        if (cpu_is_mx27())
+                return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
+        else
+#endif
+                return 0;
 }
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 97306aa18f1..f15df2aaae4 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -1,8 +1,10 @@
 extern struct platform_device mxc_gpt1;
 extern struct platform_device mxc_gpt2;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
+#endif
 extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
@@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_nand_device;
+#ifdef CONFIG_MACH_MX21
+extern struct platform_device imx21_nand_device;
+#endif
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx27_nand_device;
+#endif
 extern struct platform_device mxc_fb_device;
 extern struct platform_device mxc_fec_device;
 extern struct platform_device mxc_pwm_device;
 extern struct platform_device mxc_i2c_device0;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_i2c_device1;
+#endif
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
@@ -25,6 +34,8 @@ extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
+#ifdef CONFIG_MACH_MX27
 extern struct platform_device mxc_spi_device2;
+#endif
 extern struct platform_device imx_ssi_device0;
 extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
index 7382b6d27ee..f3b169d5245 100644
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
index 7b187606682..1f616dcaabc 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/mach-cpuimx27.c
@@ -36,7 +36,7 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 
@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
         {
-                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
                 .irq = IRQ_GPIOB(23),
                 .uartclk = 14745600,
                 .regshift = 1,
                 .iotype = UPIO_MEM,
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
-                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
                 .irq = IRQ_GPIOB(22),
                 .uartclk = 14745600,
                 .regshift = 1,
                 .iotype = UPIO_MEM,
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
-                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
                 .irq = IRQ_GPIOB(27),
                 .uartclk = 14745600,
                 .regshift = 1,
                 .iotype = UPIO_MEM,
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
-                .mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+                .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
                 .irq = IRQ_GPIOB(30),
                 .uartclk = 14745600,
                 .regshift = 1,
@@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void)
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 
-        mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+        mxc_register_device(&imx27_nand_device,
+                        &eukrea_cpuimx27_nand_board_info);
 
         i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
                                 ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
@@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = eukrea_cpuimx27_init,
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
index 82ea227ea0c..b5710bf18b9 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mach-imx27lite.c
@@ -27,7 +27,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27lite.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = mx27lite_init,
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
index cf5f77cbc2f..113e58d7cb4 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mach-mx21ads.c
@@ -30,7 +30,7 @@
 #include <asm/mach/map.h>
 #include <mach/imx-uart.h>
 #include <mach/imxfb.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
 #include <mach/mmc.h>
 #include <mach/board-mx21ads.h>
@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 };
 
 static struct resource mx21ads_flash_resource = {
-        .start = CS0_BASE_ADDR,
-        .end = CS0_BASE_ADDR + 0x02000000 - 1,
+        .start = MX21_CS0_BASE_ADDR,
+        .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
         .flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
          */
         {
                 .virtual = MX21ADS_MMIO_BASE_ADDR,
-                .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+                .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
                 .length = MX21ADS_MMIO_SIZE,
                 .type = MT_DEVICE,
         },
@@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void)
         mxc_register_device(&mxc_uart_device3, &uart_pdata);
         mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
         mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-        mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+        mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
@@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX21_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX21_PHYS_OFFSET + 0x100,
         .map_io         = mx21ads_map_io,
         .init_irq       = mx21_init_irq,
         .init_machine   = mx21ads_board_init,
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
index 6761d1b79e4..b2f4e0db3fb 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mach-mx27_3ds.c
@@ -26,7 +26,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27pdk.h>
 
 #include "devices.h"
@@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = mx27pdk_init,
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
index 83e412b713e..6ce323669e5 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mach-mx27ads.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <mach/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/board-mx27ads.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
@@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void)
         mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
         mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
         mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-        mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+        mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
 
         /* only the i2c master 1 is used on this CPU card */
         i2c_register_board_info(1, mx27ads_i2c_devices,
@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
 static struct map_desc mx27ads_io_desc[] __initdata = {
         {
                 .virtual = PBC_BASE_ADDRESS,
-                .pfn = __phys_to_pfn(CS4_BASE_ADDR),
+                .pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
                 .length = SZ_1M,
                 .type = MT_DEVICE,
         },
@@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
         /* maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27ads_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = mx27ads_board_init,
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
index 8bcc1a5b882..bc385599267 100644
--- a/arch/arm/mach-mx2/mxt_td60.c
+++ b/arch/arm/mach-mx2/mach-mxt_td60.c
@@ -33,7 +33,7 @@
 #include <asm/mach/map.h>
 #include <linux/gpio.h>
 #include <mach/imx-uart.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <mach/i2c.h>
 #include <linux/i2c/pca953x.h>
@@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void)
         mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
         mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
         mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-        mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+        mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
 
         i2c_register_board_info(0, mxt_td60_i2c_devices,
                                 ARRAY_SIZE(mxt_td60_i2c_devices));
@@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
         /* maintainer: Maxtrack Industrial */
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = mxt_td60_board_init,
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/mach-pca100.c
index aea3d340d2e..778fff23091 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/mach-pca100.c
@@ -25,25 +25,36 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 #include <linux/irq.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/i2c.h>
 #include <asm/mach/time.h>
 #if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 #include <mach/spi.h>
 #endif
 #include <mach/imx-uart.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
+#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
+#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
+
 static int pca100_pins[] = {
         /* UART1 */
         PE12_PF_UART1_TXD,
@@ -92,6 +103,34 @@ static int pca100_pins[] = {
         PD29_PF_CSPI1_SCLK,
         PD30_PF_CSPI1_MISO,
         PD31_PF_CSPI1_MOSI,
+        /* OTG */
+        OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+        PC7_PF_USBOTG_DATA5,
+        PC8_PF_USBOTG_DATA6,
+        PC9_PF_USBOTG_DATA0,
+        PC10_PF_USBOTG_DATA2,
+        PC11_PF_USBOTG_DATA1,
+        PC12_PF_USBOTG_DATA4,
+        PC13_PF_USBOTG_DATA3,
+        PE0_PF_USBOTG_NXT,
+        PE1_PF_USBOTG_STP,
+        PE2_PF_USBOTG_DIR,
+        PE24_PF_USBOTG_CLK,
+        PE25_PF_USBOTG_DATA7,
+        /* USBH2 */
+        USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
+        PA0_PF_USBH2_CLK,
+        PA1_PF_USBH2_DIR,
+        PA2_PF_USBH2_DATA7,
+        PA3_PF_USBH2_NXT,
+        PA4_PF_USBH2_STP,
+        PD19_AF_USBH2_DATA4,
+        PD20_AF_USBH2_DATA3,
+        PD21_AF_USBH2_DATA6,
+        PD22_AF_USBH2_DATA0,
+        PD23_AF_USBH2_DATA2,
+        PD24_AF_USBH2_DATA1,
+        PD26_AF_USBH2_DATA5,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
 };
 #endif
 
+static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+        mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
+        gpio_set_value(GPIO_PORTC + 20, 1);
+        udelay(2);
+        gpio_set_value(GPIO_PORTC + 20, 0);
+        mxc_gpio_mode(PC20_PF_SSI1_FS);
+        msleep(2);
+}
+
+static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+        mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
+        gpio_set_value(GPIO_PORTC + 20, 0);
+        mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
+        gpio_set_value(GPIO_PORTC + 22, 0);
+        mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
+        gpio_set_value(GPIO_PORTC + 28, 0);
+        udelay(10);
+        gpio_set_value(GPIO_PORTC + 28, 1);
+        mxc_gpio_mode(PC20_PF_SSI1_FS);
+        mxc_gpio_mode(PC22_PF_SSI1_TXD);
+        msleep(2);
+}
+
+static struct imx_ssi_platform_data pca100_ssi_pdata = {
+        .ac97_reset             = pca100_ac97_cold_reset,
+        .ac97_warm_reset        = pca100_ac97_warm_reset,
+        .flags                  = IMX_SSI_USE_AC97,
+};
+
 static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
                 void *data)
 {
@@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = {
         .exit = pca100_sdhc2_exit,
 };
 
+static int otg_phy_init(struct platform_device *pdev)
+{
+        gpio_set_value(OTG_PHY_CS_GPIO, 0);
+        return 0;
+}
+
+static struct mxc_usbh_platform_data otg_pdata = {
+        .init   = otg_phy_init,
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static int usbh2_phy_init(struct platform_device *pdev)
+{
+        gpio_set_value(USBH2_PHY_CS_GPIO, 0);
+        return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+        .init   = usbh2_phy_init,
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pca100_otg_mode(char *options)
+{
+        if (!strcmp(options, "host"))
+                otg_mode_host = 1;
+        else if (!strcmp(options, "device"))
+                otg_mode_host = 0;
+        else
+                pr_info("otg_mode neither \"host\" nor \"device\". "
+                        "Defaulting to device\n");
+        return 0;
+}
+__setup("otg_mode=", pca100_otg_mode);
+
 static void __init pca100_init(void)
 {
         int ret;
 
+        /* SSI unit */
+        mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
+                                  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+                                  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
+                                  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
+                                  MXC_AUDMUX_V1_PCR_RXDSEL(3));
+        mxc_audmux_v1_configure_port(3,
+                                  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
+                                  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
+                                  MXC_AUDMUX_V1_PCR_TFSDIR |
+                                  MXC_AUDMUX_V1_PCR_RXDSEL(0));
+
         ret = mxc_gpio_setup_multiple_pins(pca100_pins,
                         ARRAY_SIZE(pca100_pins), "PCA100");
         if (ret)
                 printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
 
+        mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
+
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
         mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
         mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 
-        mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+        mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
 
         /* only the i2c master 1 is used on this CPU card */
         i2c_register_board_info(1, pca100_i2c_devices,
@@ -220,6 +348,29 @@ static void __init pca100_init(void)
         mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
 #endif
 
+        gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
+        gpio_direction_output(OTG_PHY_CS_GPIO, 1);
+        gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
+        gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
+
+#if defined(CONFIG_USB_ULPI)
+        if (otg_mode_host) {
+                otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+                mxc_register_device(&mxc_otg_host, &otg_pdata);
+        }
+
+        usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+        mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+        if (!otg_mode_host) {
+                gpio_set_value(OTG_PHY_CS_GPIO, 0);
+                mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+        }
+
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
 
@@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = pca100_init,
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
index 906d59b0a7a..035fbe046ec 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/mach-pcm038.c
@@ -36,10 +36,12 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/i2c.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
 #include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -96,6 +98,19 @@ static int pcm038_pins[] = {
         PC17_PF_SSI4_RXD,
         PC18_PF_SSI4_TXD,
         PC19_PF_SSI4_CLK,
+        /* USB host */
+        PA0_PF_USBH2_CLK,
+        PA1_PF_USBH2_DIR,
+        PA2_PF_USBH2_DATA7,
+        PA3_PF_USBH2_NXT,
+        PA4_PF_USBH2_STP,
+        PD19_AF_USBH2_DATA4,
+        PD20_AF_USBH2_DATA3,
+        PD21_AF_USBH2_DATA6,
+        PD22_AF_USBH2_DATA0,
+        PD23_AF_USBH2_DATA2,
+        PD24_AF_USBH2_DATA1,
+        PD26_AF_USBH2_DATA5,
 };
 
 /*
@@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-        .start = CS1_BASE_ADDR,
-        .end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+        .start = MX27_CS1_BASE_ADDR,
+        .end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
         .flags = IORESOURCE_MEM,
 };
 
@@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-        __raw_writel(0x0000d843, CSCR_U(1));
-        __raw_writel(0x22252521, CSCR_L(1));
-        __raw_writel(0x22220a00, CSCR_A(1));
+        mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
         }
 };
 
+static struct mxc_usbh_platform_data usbh2_pdata = {
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
 static void __init pcm038_init(void)
 {
         mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -291,7 +309,7 @@ static void __init pcm038_init(void)
         mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
 
         mxc_gpio_mode(PE16_AF_OWIRE);
-        mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
+        mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
 
         /* only the i2c master 1 is used on this CPU card */
         i2c_register_board_info(1, pcm038_i2c_devices,
@@ -311,6 +329,8 @@ static void __init pcm038_init(void)
         spi_register_board_info(pcm038_spi_board_info,
                                 ARRAY_SIZE(pcm038_spi_board_info));
 
+        mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
@@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-        .phys_io        = AIPI_BASE_ADDR,
-        .io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX27_AIPI_BASE_ADDR,
+        .io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX27_PHYS_OFFSET + 0x100,
         .map_io         = mx27_map_io,
         .init_irq       = mx27_init_irq,
         .init_machine   = pcm038_init,
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c
new file mode 100644
index 00000000000..64134314d01
--- /dev/null
+++ b/arch/arm/mach-mx2/mm-imx21.c
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-mx2/mm-imx21.c
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/* MX21 memory map definition */
+static struct map_desc imx21_io_desc[] __initdata = {
+        /*
+         * this fixed mapping covers:
+         * - AIPI1
+         * - AIPI2
+         * - AITC
+         * - ROM Patch
+         * - and some reserved space
+         */
+        {
+                .virtual = MX21_AIPI_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
+                .length = MX21_AIPI_SIZE,
+                .type = MT_DEVICE
+        },
+        /*
+         * this fixed mapping covers:
+         * - CSI
+         * - ATA
+         */
+        {
+                .virtual = MX21_SAHB1_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
+                .length = MX21_SAHB1_SIZE,
+                .type = MT_DEVICE
+        },
+        /*
+         * this fixed mapping covers:
+         * - EMI
+         */
+        {
+                .virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
+                .length = MX21_X_MEMC_SIZE,
+                .type = MT_DEVICE
+        },
+};
+
+/*
+ * Initialize the memory map. It is called during the
+ * system startup to create static physical to virtual
+ * memory map for the IO modules.
+ */
+void __init mx21_map_io(void)
+{
+        mxc_set_cpu_type(MXC_CPU_MX21);
+        mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
+
+        iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
+}
+
+void __init mx21_init_irq(void)
+{
+        mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/mm-imx27.c
index ae8f759134d..3366ed44cfd 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/mm-imx27.c
@@ -1,5 +1,5 @@
 /*
- * generic.c
+ * arch/arm/mach-mx2/mm-imx27.c
  *
  * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
  *
@@ -26,7 +26,7 @@
 #include <asm/mach/map.h>
 
 /* MX27 memory map definition */
-static struct map_desc mxc_io_desc[] __initdata = {
+static struct map_desc imx27_io_desc[] __initdata = {
         /*
          * this fixed mapping covers:
          * - AIPI1
@@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
          * - and some reserved space
          */
         {
-                .virtual = AIPI_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(AIPI_BASE_ADDR),
-                .length = AIPI_SIZE,
+                .virtual = MX27_AIPI_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
+                .length = MX27_AIPI_SIZE,
                 .type = MT_DEVICE
         },
         /*
@@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
          * - ATA
          */
         {
-                .virtual = SAHB1_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
-                .length = SAHB1_SIZE,
+                .virtual = MX27_SAHB1_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
+                .length = MX27_SAHB1_SIZE,
                 .type = MT_DEVICE
         },
         /*
@@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
          * - EMI
          */
         {
-                .virtual = X_MEMC_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
-                .length = X_MEMC_SIZE,
+                .virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
+                .length = MX27_X_MEMC_SIZE,
                 .type = MT_DEVICE
-        }
+        },
 };
 
 /*
@@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = {
  * system startup to create static physical to virtual
  * memory map for the IO modules.
  */
-void __init mx21_map_io(void)
-{
-        mxc_set_cpu_type(MXC_CPU_MX21);
-        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
-}
-
 void __init mx27_map_io(void)
 {
         mxc_set_cpu_type(MXC_CPU_MX27);
-        mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+        mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
 
-        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+        iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
 }
 
 void __init mx27_init_irq(void)
 {
-        mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+        mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
 }
-
-void __init mx21_init_irq(void)
-{
-        mx27_init_irq();
-}
-
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 3cb7f457e5d..4aafd5b8b85 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -24,7 +24,7 @@
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 #include <mach/imxfb.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
         {
-                .start   = CS4_BASE_ADDR,
-                .end     = CS4_BASE_ADDR + 0x100 - 1,
+                .start   = MX27_CS4_BASE_ADDR,
+                .end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
                 .flags   = IORESOURCE_MEM,
         }, {
                 .start   = IRQ_GPIOE(19),
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 40a485cdc10..1c0c835b225 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -26,12 +26,12 @@
 
 static struct resource uart0[] = {
         {
-                .start = UART1_BASE_ADDR,
-                .end = UART1_BASE_ADDR + 0x0B5,
+                .start = MX2x_UART1_BASE_ADDR,
+                .end = MX2x_UART1_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART1,
-                .end = MXC_INT_UART1,
+                .start = MX2x_INT_UART1,
+                .end = MX2x_INT_UART1,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = {
 
 static struct resource uart1[] = {
         {
-                .start = UART2_BASE_ADDR,
-                .end = UART2_BASE_ADDR + 0x0B5,
+                .start = MX2x_UART2_BASE_ADDR,
+                .end = MX2x_UART2_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART2,
-                .end = MXC_INT_UART2,
+                .start = MX2x_INT_UART2,
+                .end = MX2x_INT_UART2,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = {
 
 static struct resource uart2[] = {
         {
-                .start = UART3_BASE_ADDR,
-                .end = UART3_BASE_ADDR + 0x0B5,
+                .start = MX2x_UART3_BASE_ADDR,
+                .end = MX2x_UART3_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART3,
-                .end = MXC_INT_UART3,
+                .start = MX2x_INT_UART3,
+                .end = MX2x_INT_UART3,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = {
 
 static struct resource uart3[] = {
         {
-                .start = UART4_BASE_ADDR,
-                .end = UART4_BASE_ADDR + 0x0B5,
+                .start = MX2x_UART4_BASE_ADDR,
+                .end = MX2x_UART4_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART4,
-                .end = MXC_INT_UART4,
+                .start = MX2x_INT_UART4,
+                .end = MX2x_INT_UART4,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = {
 #ifdef CONFIG_MACH_MX27
 static struct resource uart4[] = {
         {
-                .start = UART5_BASE_ADDR,
-                .end = UART5_BASE_ADDR + 0x0B5,
+                .start = MX27_UART5_BASE_ADDR,
+                .end = MX27_UART5_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART5,
-                .end = MXC_INT_UART5,
+                .start = MX27_INT_UART5,
+                .end = MX27_INT_UART5,
                 .flags = IORESOURCE_IRQ,
         },
 };
@@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = {
 
 static struct resource uart5[] = {
         {
-                .start = UART6_BASE_ADDR,
-                .end = UART6_BASE_ADDR + 0x0B5,
+                .start = MX27_UART6_BASE_ADDR,
+                .end = MX27_UART6_BASE_ADDR + 0x0B5,
                 .flags = IORESOURCE_MEM,
         }, {
-                .start = MXC_INT_UART6,
-                .end = MXC_INT_UART6,
+                .start = MX27_INT_UART6,
+                .end = MX27_INT_UART6,
                 .flags = IORESOURCE_IRQ,
         },
 };
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index cc28f56eae8..54d217314ee 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -3,7 +3,6 @@ if ARCH_MX25
 comment "MX25 platforms:"
 
 config MACH_MX25_3DS
-        select ARCH_MXC_IOMUX_V3
         bool "Support MX25PDK (3DS) Platform"
 
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index fe23836a9f3..10cebc5ced8 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,3 +1,3 @@
 obj-y                           := mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)         += clock.o
-obj-$(CONFIG_MACH_MX25_3DS)     += mx25pdk.o
+obj-$(CONFIG_MACH_MX25_3DS)     += mach-mx25pdk.o
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b85771..56bf958d8c3 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,16 @@ static unsigned long get_rate_nfc(struct clk *clk)
         return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+        return get_rate_per(5);
+}
+
+static unsigned long get_rate_lcdc(struct clk *clk)
+{
+        return get_rate_per(7);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
         return 48000000; /* FIXME */
@@ -144,7 +154,7 @@ static void clk_cgcr_disable(struct clk *clk)
         __raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)           \
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)        \
         static struct clk name = {                      \
                 .id             = i,                    \
                 .enable_reg     = CRM_BASE + er,        \
@@ -153,27 +163,34 @@ static void clk_cgcr_disable(struct clk *clk)
                 .set_rate       = sr,                   \
                 .enable         = clk_cgcr_enable,      \
                 .disable        = clk_cgcr_disable,     \
+                .secondary      = s,                    \
         }
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,   0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,   0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,   0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,   0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,    0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,    0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,    0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,    0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,        NULL, NULL);
+DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL,       NULL, NULL);
+DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0,  7, NULL,       NULL, &lcdc_ahb_clk);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,   0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,   0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,   0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,   0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,    0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,    0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,    0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,    0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
+DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1,  8, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(lcdc_clk,   0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
 
 #define _REGISTER_CLOCK(d, n, c)        \
         {                               \
@@ -206,15 +223,28 @@ static struct clk_lookup lookups[] = {
         _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
         _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
         _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+        _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
+        _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
         int i;
 
         for (i = 0; i < ARRAY_SIZE(lookups); i++)
                 clkdev_add(&lookups[i]);
 
+        /* Turn off all clocks except the ones we need to survive, namely:
+         * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+         * SCC
+         */
+        __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+        __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+        __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
+        /* Clock source for lcdc is upll */
+        __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
+
         mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
         return 0;
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 9fdeea1c083..3f4b8a0b5fa 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = {
         .num_resources  = ARRAY_SIZE(mx25_fec_resources),
         .resource       = mx25_fec_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+        {
+                .start  = MX25_NFC_BASE_ADDR,
+                .end    = MX25_NFC_BASE_ADDR + 0x1fff,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = MX25_INT_NANDFC,
+                .end    = MX25_INT_NANDFC,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_nand_device = {
+        .name           = "mxc_nand",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(mxc_nand_resources),
+        .resource       = mxc_nand_resources,
+};
+
+static struct resource mx25_rtc_resources[] = {
+        {
+                .start  = MX25_DRYICE_BASE_ADDR,
+                .end    = MX25_DRYICE_BASE_ADDR + 0x40,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = MX25_INT_DRYICE,
+                .flags  = IORESOURCE_IRQ
+        },
+};
+
+struct platform_device mx25_rtc_device = {
+        .name   = "imxdi_rtc",
+        .id     = 0,
+        .num_resources  = ARRAY_SIZE(mx25_rtc_resources),
+        .resource       = mx25_rtc_resources,
+};
+
+static struct resource mx25_fb_resources[] = {
+        {
+                .start  = MX25_LCDC_BASE_ADDR,
+                .end    = MX25_LCDC_BASE_ADDR + 0xfff,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = MX25_INT_LCDC,
+                .end    = MX25_INT_LCDC,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mx25_fb_device = {
+        .name           = "imx-fb",
+        .id             = 0,
+        .resource       = mx25_fb_resources,
+        .num_resources  = ARRAY_SIZE(mx25_fb_resources),
+        .dev            = {
+                .coherent_dma_mask = 0xFFFFFFFF,
+        },
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe5420fcd11..39560e13bc0 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
 extern struct platform_device mx25_fec_device;
+extern struct platform_device mxc_nand_device;
+extern struct platform_device mx25_rtc_device;
+extern struct platform_device mx25_fb_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mach-mx25pdk.c
index 921bc99ea23..83d74109e7d 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mach-mx25pdk.c
@@ -35,8 +35,9 @@
 #include <mach/imx-uart.h>
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
+#include <mach/imxfb.h>
 #include "devices.h"
-#include <mach/iomux.h>
+#include <mach/iomux-mx25.h>
 
 static struct imxuart_platform_data uart_pdata = {
         .flags = IMXUART_HAVE_RTSCTS,
@@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = {
         MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
         MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
         MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+
+        /* LCD */
+        MX25_PAD_LD0__LD0,
+        MX25_PAD_LD1__LD1,
+        MX25_PAD_LD2__LD2,
+        MX25_PAD_LD3__LD3,
+        MX25_PAD_LD4__LD4,
+        MX25_PAD_LD5__LD5,
+        MX25_PAD_LD6__LD6,
+        MX25_PAD_LD7__LD7,
+        MX25_PAD_LD8__LD8,
+        MX25_PAD_LD9__LD9,
+        MX25_PAD_LD10__LD10,
+        MX25_PAD_LD11__LD11,
+        MX25_PAD_LD12__LD12,
+        MX25_PAD_LD13__LD13,
+        MX25_PAD_LD14__LD14,
+        MX25_PAD_LD15__LD15,
+        MX25_PAD_GPIO_E__LD16,
+        MX25_PAD_GPIO_F__LD17,
+        MX25_PAD_HSYNC__HSYNC,
+        MX25_PAD_VSYNC__VSYNC,
+        MX25_PAD_LSCLK__LSCLK,
+        MX25_PAD_OE_ACD__OE_ACD,
+        MX25_PAD_CONTRAST__CONTRAST,
 };
 
 static struct fec_platform_data mx25_fec_pdata = {
@@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void)
         gpio_set_value(FEC_RESET_B_GPIO, 1);
 }
 
+static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
+        .width          = 1,
+        .hw_ecc         = 1,
+        .flash_bbt      = 1,
+};
+
+static struct imx_fb_videomode mx25pdk_modes[] = {
+        {
+                .mode   = {
+                        .name           = "CRT-VGA",
+                        .refresh        = 60,
+                        .xres           = 640,
+                        .yres           = 480,
+                        .pixclock       = 39683,
+                        .left_margin    = 45,
+                        .right_margin   = 114,
+                        .upper_margin   = 33,
+                        .lower_margin   = 11,
+                        .hsync_len      = 1,
+                        .vsync_len      = 1,
+                },
+                .bpp    = 16,
+                .pcr    = 0xFA208B80,
+        },
+};
+
+static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+        .mode           = mx25pdk_modes,
+        .num_modes      = ARRAY_SIZE(mx25pdk_modes),
+        .pwmr           = 0x00A903FF,
+        .lscr1          = 0x00120300,
+        .dmacr          = 0x00020010,
+};
+
 static void __init mx25pdk_init(void)
 {
         mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
@@ -84,6 +144,9 @@ static void __init mx25pdk_init(void)
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
         mxc_register_device(&mxc_usbh2, NULL);
+        mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
+        mxc_register_device(&mx25_rtc_device, NULL);
+        mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
 
         mx25pdk_fec_reset();
         mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
@@ -91,7 +154,7 @@ static void __init mx25pdk_init(void)
 
 static void __init mx25pdk_timer_init(void)
 {
-        mx25_clocks_init(26000000);
+        mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {
@@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
         /* Maintainer: Freescale Semiconductor, Inc. */
         .phys_io        = MX25_AIPS1_BASE_ADDR,
         .io_pg_offst    = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .boot_params    = MX25_PHYS_OFFSET + 0x100,
         .map_io         = mx25_map_io,
         .init_irq       = mx25_init_irq,
         .init_machine   = mx25pdk_init,
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 28294416b0a..3872af1cf2c 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
 config MACH_PCM037
         bool "Support Phytec pcm037 (i.MX31) platforms"
         select ARCH_MX31
+        select MXC_ULPI if USB_ULPI
         help
           Include support for Phytec pcm037 platform. This includes
           specific configurations for the board and its peripherals.
@@ -86,6 +87,7 @@ config MACH_QONG
 config MACH_PCM043
         bool "Support Phytec pcm043 (i.MX35) platforms"
         select ARCH_MX35
+        select MXC_ULPI if USB_ULPI
         help
           Include support for Phytec pcm043 platform. This includes
           specific configurations for the board and its peripherals.
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 93c7b296be6..5d650fda5d5 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y                           := mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)         += clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)         += clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)         += clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)      += mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)    += mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)     += mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)       += pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)   += pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)     += mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)  += mx31moboard.o mx31moboard-devboard.o \
-                                   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)         += qong.o
-obj-$(CONFIG_MACH_PCM043)       += pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)     += mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
+obj-$(CONFIG_MACH_MX31ADS)      += mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)    += mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)     += mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)       += mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)   += mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)     += mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)  += mach-mx31moboard.o mx31moboard-devboard.o \
+                                   mx31moboard-marxbot.o mx31moboard-smartbot.o
+obj-$(CONFIG_MACH_QONG)         += mach-qong.o
+obj-$(CONFIG_MACH_PCM043)       += mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)     += mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock-imx31.c
index 27a318af0d2..d22a66f502a 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref)
 
         mx31_read_cpu_rev();
 
-        if (mx31_revision() >= CHIP_REV_2_0) {
+        if (mx31_revision() >= MX31_CHIP_REV_2_0) {
                 reg = __raw_readl(MXC_CCM_PMCR1);
                 /* No PLL restart on DVFS switch; enable auto EMI handshake */
                 reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
                 __raw_writel(reg, MXC_CCM_PMCR1);
         }
 
-        mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+        mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+                        MX31_INT_GPT);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 7584b4c6c55..07d630ebc28 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE        IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE        MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -504,7 +504,8 @@ int __init mx35_clocks_init()
         __raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
         __raw_writel(0, CCM_BASE + CCM_CGR3);
 
-        mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+        mxc_timer_init(&gpt_clk,
+                        MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
         return 0;
 }
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index db828809c67..861afe0fe3a 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
         u32 i, srev;
 
         /* read SREV register from IIM module */
-        srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+        srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
         for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
                 if (srev == mx31_cpu_type[i].srev) {
diff --git a/arch/arm/mach-mx3/crm_regs.h b/arch/arm/mach-mx3/crm_regs.h
index adfa3627ad8..37a8a07beda 100644
--- a/arch/arm/mach-mx3/crm_regs.h
+++ b/arch/arm/mach-mx3/crm_regs.h
@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE            IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE            MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR            (MXC_CCM_BASE + 0x00)
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux-imx31.c
index c66ccbcdc11..a1d7fa5123d 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux-imx31.c
@@ -29,7 +29,7 @@
 /*
  * IOMUX register (base) addresses
  */
-#define IOMUX_BASE      IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE      MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
 #define IOMUXINT_OBS1   (IOMUX_BASE + 0x000)
 #define IOMUXINT_OBS2   (IOMUX_BASE + 0x004)
 #define IOMUXGPR        (IOMUX_BASE + 0x008)
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index 54aab401dbd..3d72b0b8970 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
 
 static struct resource armadillo5x0_nor_flash_resource = {
         .flags          = IORESOURCE_MEM,
-        .start          = CS0_BASE_ADDR,
-        .end            = CS0_BASE_ADDR + SZ_64M - 1,
+        .start          = MX31_CS0_BASE_ADDR,
+        .end            = MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
 static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
         {
-                .start  = CS3_BASE_ADDR,
-                .end    = CS3_BASE_ADDR + SZ_32M - 1,
+                .start  = MX31_CS3_BASE_ADDR,
+                .end    = MX31_CS3_BASE_ADDR + SZ_32M - 1,
                 .flags  = IORESOURCE_MEM,
         }, {
                 .start  = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
         /* Maintainer: Alberto Panizzo  */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x00000100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
         .init_irq       = mx31_init_irq,
         .timer          = &armadillo5x0_timer,
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 6fa99ce3008..f085d5d1a6d 100644
--- a/arch/arm/mach-mx3/kzmarm11.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -46,13 +46,18 @@
 
 #include "devices.h"
 
+#define KZM_ARM11_IO_ADDRESS(x) (                                       \
+        IMX_IO_ADDRESS(x, MX31_CS4) ?:                                  \
+        IMX_IO_ADDRESS(x, MX31_CS5) ?:                                  \
+        MX31_IO_ADDRESS(x))
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
 static struct plat_serial8250_port serial_platform_data[] = {
         {
-                .membase        = IO_ADDRESS(KZM_ARM11_16550),
+                .membase        = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
                 .mapbase        = KZM_ARM11_16550,
                 .irq            = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
                 .irqflags       = IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
         /*
          * Unmask UART interrupt
          */
-        tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+        tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
         tmp |= 0x2;
-        __raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+        __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 
         return platform_device_register(&serial_device);
 }
@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
 
 static struct resource kzm_smsc9118_resources[] = {
         {
-                .start  = CS5_BASE_ADDR,
-                .end    = CS5_BASE_ADDR + SZ_128K - 1,
+                .start  = MX31_CS5_BASE_ADDR,
+                .end    = MX31_CS5_BASE_ADDR + SZ_128K - 1,
                 .flags  = IORESOURCE_MEM,
         },
         {
@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
  */
 static struct map_desc kzm_io_desc[] __initdata = {
         {
-                .virtual        = CS4_BASE_ADDR_VIRT,
-                .pfn            = __phys_to_pfn(CS4_BASE_ADDR),
-                .length         = CS4_SIZE,
+                .virtual        = MX31_CS4_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+                .length         = MX31_CS4_SIZE,
                 .type           = MT_DEVICE
         },
         {
-                .virtual        = CS5_BASE_ADDR_VIRT,
-                .pfn            = __phys_to_pfn(CS5_BASE_ADDR),
-                .length         = CS5_SIZE,
+                .virtual        = MX31_CS5_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+                .length         = MX31_CS5_SIZE,
                 .type           = MT_DEVICE
         },
 };
@@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = kzm_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = kzm_board_init,
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 18715f1aa7e..b88c18ad769 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
         {
-                .virtual = CS5_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(CS5_BASE_ADDR),
-                .length = CS5_SIZE,
+                .virtual = MX31_CS5_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+                .length = MX31_CS5_SIZE,
                 .type = MT_DEVICE,
         },
 };
@@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31pdk_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mach-mx31ads.c
index 3e7bafa2ddb..b3d1a1895c2 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mach-mx31ads.c
@@ -60,7 +60,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
         {
                 .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-                .mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+                .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
                 .irq      = EXPIO_INT_XUART_INTA,
                 .uartclk  = 14745600,
                 .regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
         }, {
                 .membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-                .mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+                .mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
                 .irq      = EXPIO_INT_XUART_INTB,
                 .uartclk  = 14745600,
                 .regshift = 0,
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
 }
 
 static struct irq_chip expio_irq_chip = {
+        .name = "EXPIO(CPLD)",
         .ack = expio_ack_irq,
         .mask = expio_mask_irq,
         .unmask = expio_unmask_irq,
@@ -302,17 +303,14 @@ static struct regulator_init_data ldo1_data = {
                 .min_uV = 2800000,
                 .max_uV = 2800000,
                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                 .apply_uV = 1,
         },
 };
 
 static struct regulator_consumer_supply ldo2_consumers[] = {
-        {
-                .supply = "AVDD",
-        },
-        {
-                .supply = "HPVDD",
-        },
+        { .supply = "AVDD", .dev_name = "1-001a" },
+        { .supply = "HPVDD", .dev_name = "1-001a" },
 };
 
 /* CODEC and SIM */
@@ -322,6 +320,7 @@ static struct regulator_init_data ldo2_data = {
                 .min_uV = 3300000,
                 .max_uV = 3300000,
                 .valid_modes_mask = REGULATOR_MODE_NORMAL,
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
                 .apply_uV = 1,
         },
         .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -382,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
 
 static int mx31_wm8350_init(struct wm8350 *wm8350)
 {
-        int i;
-
         wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
                            WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
                            WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
@@ -419,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
                            WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
                            WM8350_GPIO_DEBOUNCE_OFF);
 
-        /* Fix up for our own supplies. */
-        for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
-                ldo2_consumers[i].dev = wm8350->dev;
-
         wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
         wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
         wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
@@ -459,6 +452,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
         .init = mx31_wm8350_init,
+        .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
@@ -489,14 +483,27 @@ static void mxc_init_i2c(void)
 }
 #endif
 
+static unsigned int ssi_pins[] = {
+        MX31_PIN_SFS5__SFS5,
+        MX31_PIN_SCK5__SCK5,
+        MX31_PIN_SRXD5__SRXD5,
+        MX31_PIN_STXD5__STXD5,
+};
+
+static void mxc_init_audio(void)
+{
+        mxc_register_device(&imx_ssi_device0, NULL);
+        mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
+}
+
 /*!
  * This structure defines static mappings for the i.MX31ADS board.
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
         {
-                .virtual        = CS4_BASE_ADDR_VIRT,
-                .pfn            = __phys_to_pfn(CS4_BASE_ADDR),
-                .length         = CS4_SIZE / 2,
+                .virtual        = MX31_CS4_BASE_ADDR_VIRT,
+                .pfn            = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+                .length         = MX31_CS4_SIZE / 2,
                 .type           = MT_DEVICE
         },
 };
@@ -524,6 +531,7 @@ static void __init mxc_board_init(void)
         mxc_init_extuart();
         mxc_init_imx_uart();
         mxc_init_i2c();
+        mxc_init_audio();
 }
 
 static void __init mx31ads_timer_init(void)
@@ -541,9 +549,9 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31ads_map_io,
         .init_irq       = mx31ads_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 9ce029f554b..80847b04c06 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -57,8 +57,8 @@
 
 static struct resource smsc91x_resources[] = {
         {
-                .start  = CS4_BASE_ADDR,
-                .end    = CS4_BASE_ADDR + 0xffff,
+                .start  = MX31_CS4_BASE_ADDR,
+                .end    = MX31_CS4_BASE_ADDR + 0xffff,
                 .flags  = IORESOURCE_MEM,
         },
         {
@@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mx31lilly_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index 789b20d1730..2b6d1140087 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct resource smsc911x_resources[] = {
         {
-                .start          = CS4_BASE_ADDR,
-                .end            = CS4_BASE_ADDR + 0x100,
+                .start          = MX31_CS4_BASE_ADDR,
+                .end            = MX31_CS4_BASE_ADDR + 0x100,
                 .flags          = IORESOURCE_MEM,
         }, {
                 .start          = IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
         {
-                .virtual = CS4_BASE_ADDR_VIRT,
-                .pfn = __phys_to_pfn(CS4_BASE_ADDR),
-                .length = CS4_SIZE,
+                .virtual = MX31_CS4_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+                .length = MX31_CS4_SIZE,
                 .type = MT_DEVICE
         }
 };
@@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
         /* Maintainer: Freescale Semiconductor, Inc. */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31lite_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index cfd605d078e..a7dc5191bf5 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -96,9 +96,6 @@ static unsigned int moboard_pins[] = {
         /* LEDs */
         MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
         MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
-        /* SEL */
-        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
-        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
         /* SPI1 */
         MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
         MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
@@ -352,9 +349,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
 {
-        int ret = gpio_request(USBH2_EN_B, "usbh2-en");
-        if (ret)
-                return ret;
+        int ret;
 
         mxc_iomux_set_gpr(MUX_PGP_UH2, true);
 
@@ -371,6 +366,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev)
         mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
         mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
 
+        ret = gpio_request(USBH2_EN_B, "usbh2-en");
+        if (ret)
+                return ret;
         gpio_direction_output(USBH2_EN_B, 0);
 
         return 0;
@@ -431,34 +429,6 @@ static struct platform_device mx31moboard_leds_device = {
         },
 };
 
-#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
-#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
-#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
-#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
-
-static void mx31moboard_init_sel_gpios(void)
-{
-        if (!gpio_request(SEL0, "sel0")) {
-                gpio_direction_input(SEL0);
-                gpio_export(SEL0, true);
-        }
-
-        if (!gpio_request(SEL1, "sel1")) {
-                gpio_direction_input(SEL1);
-                gpio_export(SEL1, true);
-        }
-
-        if (!gpio_request(SEL2, "sel2")) {
-                gpio_direction_input(SEL2);
-                gpio_export(SEL2, true);
-        }
-
-        if (!gpio_request(SEL3, "sel3")) {
-                gpio_direction_input(SEL3);
-                gpio_export(SEL3, true);
-        }
-}
-
 static struct ipu_platform_data mx3_ipu_data = {
         .irq_base = MXC_IPU_IRQ_START,
 };
@@ -518,8 +488,6 @@ static void __init mxc_board_init(void)
 
         mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
-        mx31moboard_init_sel_gpios();
-
         mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
         mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
@@ -552,6 +520,9 @@ static void __init mxc_board_init(void)
         case MX31MARXBOT:
                 mx31moboard_marxbot_init();
                 break;
+        case MX31SMARTBOT:
+                mx31moboard_smartbot_init();
+                break;
         default:
                 printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
                         mx31moboard_baseboard);
@@ -569,9 +540,9 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
         /* Maintainer: Valentin Longchamp, EPFL Mobots group */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mach-mx35pdk.c
index 0bbc65ea23c..bcac84d4dca 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mach-mx35pdk.c
@@ -106,9 +106,9 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         /* Maintainer: Freescale Semiconductor, Inc */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX35_AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx35_map_io,
         .init_irq       = mx35_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 5be396917c9..11f53155916 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 #include <linux/can/platform/sja1000.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <media/soc_camera.h>
 
@@ -51,6 +54,8 @@
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 #include "pcm037.h"
@@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = {
         MX31_PIN_CSI_VSYNC__CSI_VSYNC,
         /* GPIO */
         IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
-};
-
-static struct physmap_flash_data pcm037_flash_data = {
-        .width  = 2,
-};
-
-static struct resource pcm037_flash_resource = {
-        .start  = 0xa0000000,
-        .end    = 0xa1ffffff,
-        .flags  = IORESOURCE_MEM,
-};
-
-static int usbotg_pins[] = {
+        /* OTG */
         MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
         MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
         MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
@@ -197,39 +190,29 @@ static int usbotg_pins[] = {
         MX31_PIN_USBOTG_DIR__USBOTG_DIR,
         MX31_PIN_USBOTG_NXT__USBOTG_NXT,
         MX31_PIN_USBOTG_STP__USBOTG_STP,
+        /* USB host 2 */
+        IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
+        IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
 };
 
-/* USB OTG HS port */
-static int __init gpio_usbotg_hs_activate(void)
-{
-        int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
-                                        ARRAY_SIZE(usbotg_pins), "usbotg");
-
-        if (ret < 0) {
-                printk(KERN_ERR "Cannot set up OTG pins\n");
-                return ret;
-        }
-
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-        mxc_iomux_set_pad(MX31_PIN_USBOTG_STP,   PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
-
-        return 0;
-}
+static struct physmap_flash_data pcm037_flash_data = {
+        .width  = 2,
+};
 
-/* OTG config */
-static struct fsl_usb2_platform_data usb_pdata = {
-        .operating_mode = FSL_USB2_DR_DEVICE,
-        .phy_mode       = FSL_USB2_PHY_ULPI,
+static struct resource pcm037_flash_resource = {
+        .start  = 0xa0000000,
+        .end    = 0xa1ffffff,
+        .flags  = IORESOURCE_MEM,
 };
 
 static struct platform_device pcm037_flash = {
@@ -248,8 +231,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct resource smsc911x_resources[] = {
         {
-                .start          = CS1_BASE_ADDR + 0x300,
-                .end            = CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+                .start          = MX31_CS1_BASE_ADDR + 0x300,
+                .end            = MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
                 .flags          = IORESOURCE_MEM,
         }, {
                 .start          = IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +264,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-        .start = CS4_BASE_ADDR,
-        .end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+        .start = MX31_CS4_BASE_ADDR,
+        .end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
         .flags = IORESOURCE_MEM,
 };
 
@@ -536,8 +519,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 
 static struct resource pcm970_sja1000_resources[] = {
         {
-                .start   = CS5_BASE_ADDR,
-                .end     = CS5_BASE_ADDR + 0x100 - 1,
+                .start   = MX31_CS5_BASE_ADDR,
+                .end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
                 .flags   = IORESOURCE_MEM,
         }, {
                 .start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -561,16 +544,65 @@ static struct platform_device pcm970_sja1000 = {
         .num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+        .portsc = MXC_EHCI_MODE_ULPI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm037_otg_mode(char *options)
+{
+        if (!strcmp(options, "host"))
+                otg_mode_host = 1;
+        else if (!strcmp(options, "device"))
+                otg_mode_host = 0;
+        else
+                pr_info("otg_mode neither \"host\" nor \"device\". "
+                        "Defaulting to device\n");
+        return 0;
+}
+__setup("otg_mode=", pcm037_otg_mode);
+
 /*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
         int ret;
+        u32 tmp;
+
+        mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
 
         mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
                         "pcm037");
 
+#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
+                | PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+        mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
+        mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
+        mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG);  /* USBH2_DATA2 */
+        mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG);  /* USBH2_DATA3 */
+        mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG);   /* USBH2_DATA4 */
+        mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG);   /* USBH2_DATA5 */
+        mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG);  /* USBH2_DATA6 */
+        mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG);  /* USBH2_DATA7 */
+
         if (pcm037_variant() == PCM037_EET)
                 mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
                         ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
@@ -608,8 +640,6 @@ static void __init mxc_board_init(void)
         mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
-        if (!gpio_usbotg_hs_activate())
-                mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 
         /* CSI */
         /* Camera power: default - off */
@@ -623,6 +653,23 @@ static void __init mxc_board_init(void)
                 mxc_register_device(&mx3_camera, &camera_pdata);
 
         platform_device_register(&pcm970_sja1000);
+
+#if defined(CONFIG_USB_ULPI)
+        if (otg_mode_host) {
+                otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+                mxc_register_device(&mxc_otg_host, &otg_pdata);
+        }
+
+        usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+        mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+        if (!otg_mode_host)
+                mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm037_timer_init(void)
@@ -636,9 +683,9 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
         /* Maintainer: Pengutronix */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 8d386000fc4..8d386000fc4 100644
--- a/arch/arm/mach-mx3/pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index e3aa829be58..1bf1ec2eef5 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -26,8 +26,12 @@
 #include <linux/gpio.h>
 #include <linux/smc911x.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -44,6 +48,10 @@
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+#include <mach/audmux.h>
+#include <mach/ssi.h>
 
 #include "devices.h"
 
@@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = {
         MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
         /* gpio */
         MX35_PAD_ATA_CS0__GPIO2_6,
+        /* USB host */
+        MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
+        MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+        /* SSI */
+        MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
+        MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
+        MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
+        MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
+};
+
+#define AC97_GPIO_TXFS  (1 * 32 + 31)
+#define AC97_GPIO_TXD   (1 * 32 + 28)
+#define AC97_GPIO_RESET (1 * 32 + 0)
+
+static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
+{
+        struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+        struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+        int ret;
+
+        ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+        if (ret) {
+                printk("failed to get GPIO_TXFS: %d\n", ret);
+                return;
+        }
+
+        mxc_iomux_v3_setup_pad(&txfs_gpio);
+
+        /* warm reset */
+        gpio_direction_output(AC97_GPIO_TXFS, 1);
+        udelay(2);
+        gpio_set_value(AC97_GPIO_TXFS, 0);
+
+        gpio_free(AC97_GPIO_TXFS);
+        mxc_iomux_v3_setup_pad(&txfs);
+}
+
+static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
+{
+        struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+        struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+        struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+        struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+        struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+        int ret;
+
+        ret = gpio_request(AC97_GPIO_TXFS, "SSI");
+        if (ret)
+                goto err1;
+
+        ret = gpio_request(AC97_GPIO_TXD, "SSI");
+        if (ret)
+                goto err2;
+
+        ret = gpio_request(AC97_GPIO_RESET, "SSI");
+        if (ret)
+                goto err3;
+
+        mxc_iomux_v3_setup_pad(&txfs_gpio);
+        mxc_iomux_v3_setup_pad(&txd_gpio);
+        mxc_iomux_v3_setup_pad(&reset_gpio);
+
+        gpio_direction_output(AC97_GPIO_TXFS, 0);
+        gpio_direction_output(AC97_GPIO_TXD, 0);
+
+        /* cold reset */
+        gpio_direction_output(AC97_GPIO_RESET, 0);
+        udelay(10);
+        gpio_direction_output(AC97_GPIO_RESET, 1);
+
+        mxc_iomux_v3_setup_pad(&txd);
+        mxc_iomux_v3_setup_pad(&txfs);
+
+        gpio_free(AC97_GPIO_RESET);
+err3:
+        gpio_free(AC97_GPIO_TXD);
+err2:
+        gpio_free(AC97_GPIO_TXFS);
+err1:
+        if (ret)
+                printk("%s failed with %d\n", __func__, ret);
+        mdelay(1);
+}
+
+static struct imx_ssi_platform_data pcm043_ssi_pdata = {
+        .ac97_reset = pcm043_ac97_cold_reset,
+        .ac97_warm_reset = pcm043_ac97_warm_reset,
+        .flags = IMX_SSI_USE_AC97,
 };
 
 static struct mxc_nand_platform_data pcm037_nand_board_info = {
@@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
         .hw_ecc = 1,
 };
 
+static struct mxc_usbh_platform_data otg_pdata = {
+        .portsc = MXC_EHCI_MODE_UTMI,
+        .flags  = MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+        .portsc = MXC_EHCI_MODE_SERIAL,
+        .flags  = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
+                  MXC_EHCI_IPPUE_DOWN,
+};
+
+static struct fsl_usb2_platform_data otg_device_pdata = {
+        .operating_mode = FSL_USB2_DR_DEVICE,
+        .phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
+static int otg_mode_host;
+
+static int __init pcm043_otg_mode(char *options)
+{
+        if (!strcmp(options, "host"))
+                otg_mode_host = 1;
+        else if (!strcmp(options, "device"))
+                otg_mode_host = 0;
+        else
+                pr_info("otg_mode neither \"host\" nor \"device\". "
+                        "Defaulting to device\n");
+        return 0;
+}
+__setup("otg_mode=", pcm043_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -219,10 +346,23 @@ static void __init mxc_board_init(void)
 {
         mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
 
+        mxc_audmux_v2_configure_port(3,
+                        MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+                        MXC_AUDMUX_V2_PTCR_TFSEL(0) |
+                        MXC_AUDMUX_V2_PTCR_TFSDIR,
+                        MXC_AUDMUX_V2_PDCR_RXDSEL(0));
+
+        mxc_audmux_v2_configure_port(0,
+                        MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
+                        MXC_AUDMUX_V2_PTCR_TCSEL(3) |
+                        MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
+                        MXC_AUDMUX_V2_PDCR_RXDSEL(3));
+
         platform_add_devices(devices, ARRAY_SIZE(devices));
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
         mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
+        mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
 
         mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
@@ -235,6 +375,20 @@ static void __init mxc_board_init(void)
 
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+#if defined(CONFIG_USB_ULPI)
+        if (otg_mode_host) {
+                otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+                                USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+                mxc_register_device(&mxc_otg_host, &otg_pdata);
+        }
+
+        mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+#endif
+        if (!otg_mode_host)
+                mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+
 }
 
 static void __init pcm043_timer_init(void)
@@ -248,9 +402,9 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
         /* Maintainer: Pengutronix */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX35_AIPS1_BASE_ADDR,
+        .io_pg_offst    = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx35_map_io,
         .init_irq       = mx35_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/mach-qong.c
index 044511f1b9a..e5b5b8323a1 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/mach-qong.c
@@ -43,7 +43,7 @@
 #define QONG_FPGA_VERSION(major, minor, rev)    \
         (((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR              CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR              MX31_CS1_BASE_ADDR
 #define QONG_FPGA_PERIPH_SIZE           (1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR         QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
 };
 
 static struct resource qong_flash_resource = {
-        .start = CS0_BASE_ADDR,
-        .end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+        .start = MX31_CS0_BASE_ADDR,
+        .end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
         .flags = IORESOURCE_MEM,
 };
 
@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
 };
 
 static struct resource qong_nand_resource = {
-        .start          = CS3_BASE_ADDR,
-        .end            = CS3_BASE_ADDR + SZ_32M - 1,
+        .start          = MX31_CS3_BASE_ADDR,
+        .end            = MX31_CS3_BASE_ADDR + SZ_32M - 1,
         .flags          = IORESOURCE_MEM,
 };
 
@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
         /* init CS */
-        __raw_writel(0x00004f00, CSCR_U(3));
-        __raw_writel(0x20013b31, CSCR_L(3));
-        __raw_writel(0x00020800, CSCR_A(3));
+        mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
         mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
         /* enable pin */
@@ -275,9 +273,9 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         /* Maintainer: DENX Software Engineering GmbH */
-        .phys_io        = AIPS1_BASE_ADDR,
-        .io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .phys_io        = MX31_AIPS1_BASE_ADDR,
+        .io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
+        .boot_params    = MX3x_PHYS_OFFSET + 0x100,
         .map_io         = mx31_map_io,
         .init_irq       = mx31_init_irq,
         .init_machine   = mxc_board_init,
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 694611d6b05..ccd874225c3 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -67,6 +67,13 @@ static unsigned int litekit_db_board_pins[] __initdata = {
         MX31_PIN_CSPI1_SS0__SS0,
         MX31_PIN_CSPI1_SS1__SS1,
         MX31_PIN_CSPI1_SS2__SS2,
+        /* SDHC1 */
+        MX31_PIN_SD1_DATA0__SD1_DATA0,
+        MX31_PIN_SD1_DATA1__SD1_DATA1,
+        MX31_PIN_SD1_DATA2__SD1_DATA2,
+        MX31_PIN_SD1_DATA3__SD1_DATA3,
+        MX31_PIN_SD1_CLK__SD1_CLK,
+        MX31_PIN_SD1_CMD__SD1_CMD,
 };
 
 /* UART */
@@ -79,11 +86,11 @@ static struct imxuart_platform_data uart_pdata __initdata = {
 static int gpio_det, gpio_wp;
 
 #define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-                        PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+                     PAD_CTL_ODE_CMOS)
 
 static int mxc_mmc1_get_ro(struct device *dev)
 {
-        return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+        return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_GPIO1_6));
 }
 
 static int mxc_mmc1_init(struct device *dev,
@@ -94,12 +101,17 @@ static int mxc_mmc1_init(struct device *dev,
         gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
         gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
 
-        mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+        mxc_iomux_set_pad(MX31_PIN_SD1_DATA0,
+                          MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+        mxc_iomux_set_pad(MX31_PIN_SD1_DATA1,
+                          MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+        mxc_iomux_set_pad(MX31_PIN_SD1_DATA2,
+                          MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+        mxc_iomux_set_pad(MX31_PIN_SD1_DATA3,
+                          MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
+        mxc_iomux_set_pad(MX31_PIN_SD1_CMD,
+                          MMC_PAD_CFG | PAD_CTL_PUE_PUD | PAD_CTL_100K_PU);
         mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
-        mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
 
         ret = gpio_request(gpio_det, "MMC detect");
         if (ret)
@@ -113,7 +125,7 @@ static int mxc_mmc1_init(struct device *dev,
         gpio_direction_input(gpio_wp);
 
         ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
-                          IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+                          IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
                           "MMC detect", data);
         if (ret)
                 goto exit_free_wp;
@@ -133,7 +145,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 {
         gpio_free(gpio_det);
         gpio_free(gpio_wp);
-        free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+        free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
 static struct imxmmc_platform_data mmc_pdata = {
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 438428eaf76..9fbad2eb3a4 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -49,6 +49,9 @@ static unsigned int devboard_pins[] = {
         MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
         MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
         MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+        /* SEL */
+        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -108,6 +111,33 @@ static struct imxmmc_platform_data sdhc2_pdata = {
         .exit   = devboard_sdhc2_exit,
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void devboard_init_sel_gpios(void)
+{
+        if (!gpio_request(SEL0, "sel0")) {
+                gpio_direction_input(SEL0);
+                gpio_export(SEL0, true);
+        }
+
+        if (!gpio_request(SEL1, "sel1")) {
+                gpio_direction_input(SEL1);
+                gpio_export(SEL1, true);
+        }
+
+        if (!gpio_request(SEL2, "sel2")) {
+                gpio_direction_input(SEL2);
+                gpio_export(SEL2, true);
+        }
+
+        if (!gpio_request(SEL3, "sel3")) {
+                gpio_direction_input(SEL3);
+                gpio_export(SEL3, true);
+        }
+}
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
                         PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -196,5 +226,7 @@ void __init mx31moboard_devboard_init(void)
 
         mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 
+        devboard_init_sel_gpios();
+
         devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 1f44b9ccbb0..3958515d75b 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -66,6 +66,9 @@ static unsigned int marxbot_pins[] = {
         MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
         MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
         MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
+        /* SEL */
+        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -127,12 +130,12 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 static void dspics_resets_init(void)
 {
         if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
-                gpio_direction_output(TRSLAT_RST_B, 1);
+                gpio_direction_output(TRSLAT_RST_B, 0);
                 gpio_export(TRSLAT_RST_B, false);
         }
 
         if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
-                gpio_direction_output(DSPICS_RST_B, 1);
+                gpio_direction_output(DSPICS_RST_B, 0);
                 gpio_export(DSPICS_RST_B, false);
         }
 }
@@ -200,7 +203,7 @@ static int __init marxbot_cam_init(void)
         int ret = gpio_request(CAM_CHOICE, "cam-choice");
         if (ret)
                 return ret;
-        gpio_direction_output(CAM_CHOICE, 1);
+        gpio_direction_output(CAM_CHOICE, 0);
 
         ret = gpio_request(BASECAM_RST_B, "basecam-reset");
         if (ret)
@@ -223,6 +226,34 @@ static int __init marxbot_cam_init(void)
         return 0;
 }
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void marxbot_init_sel_gpios(void)
+{
+        if (!gpio_request(SEL0, "sel0")) {
+                gpio_direction_input(SEL0);
+                gpio_export(SEL0, true);
+        }
+
+        if (!gpio_request(SEL1, "sel1")) {
+                gpio_direction_input(SEL1);
+                gpio_export(SEL1, true);
+        }
+
+        if (!gpio_request(SEL2, "sel2")) {
+                gpio_direction_input(SEL2);
+                gpio_export(SEL2, true);
+        }
+
+        if (!gpio_request(SEL3, "sel3")) {
+                gpio_direction_input(SEL3);
+                gpio_export(SEL3, true);
+        }
+}
+
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
                         PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -307,6 +338,8 @@ void __init mx31moboard_marxbot_init(void)
         mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
                 "marxbot");
 
+        marxbot_init_sel_gpios();
+
         dspics_resets_init();
 
         mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
new file mode 100644
index 00000000000..52a69fc8b14
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include <media/soc_camera.h>
+
+#include "devices.h"
+
+static unsigned int smartbot_pins[] = {
+        /* UART1 */
+        MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+        MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+        /* CSI */
+        MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+        MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+        MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+        MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+        MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+        MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+        MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+        MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+        MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+        /* ENABLES */
+        MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+        MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#define CAM_POWER       IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define CAM_RST_B       IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+
+static int smartbot_cam_power(struct device *dev, int on)
+{
+        gpio_set_value(CAM_POWER, !on);
+        return 0;
+}
+
+static int smartbot_cam_reset(struct device *dev)
+{
+        gpio_set_value(CAM_RST_B, 0);
+        udelay(100);
+        gpio_set_value(CAM_RST_B, 1);
+        return 0;
+}
+
+static struct i2c_board_info smartbot_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("mt9t031", 0x5d),
+        },
+};
+
+static struct soc_camera_link base_iclink = {
+        .bus_id         = 0,            /* Must match with the camera ID */
+        .power          = smartbot_cam_power,
+        .reset          = smartbot_cam_reset,
+        .board_info     = &smartbot_i2c_devices[0],
+        .i2c_adapter_id = 0,
+        .module_name    = "mt9t031",
+};
+
+static struct platform_device smartbot_camera[] = {
+        {
+                .name   = "soc-camera-pdrv",
+                .id     = 0,
+                .dev    = {
+                        .platform_data = &base_iclink,
+                },
+        },
+};
+
+static struct platform_device *smartbot_cameras[] __initdata = {
+        &smartbot_camera[0],
+};
+
+static int __init smartbot_cam_init(void)
+{
+        int ret = gpio_request(CAM_RST_B, "cam-reset");
+        if (ret)
+                return ret;
+        gpio_direction_output(CAM_RST_B, 1);
+        ret = gpio_request(CAM_POWER, "cam-standby");
+        if (ret)
+                return ret;
+        gpio_direction_output(CAM_POWER, 0);
+
+        return 0;
+}
+
+#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void smartbot_resets_init(void)
+{
+        if (!gpio_request(POWER_EN, "power-enable")) {
+                gpio_direction_output(POWER_EN, 0);
+                gpio_export(POWER_EN, false);
+        }
+
+        if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
+                gpio_direction_output(DSPIC_RST_B, 0);
+                gpio_export(DSPIC_RST_B, false);
+        }
+
+        if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+                gpio_direction_output(TRSLAT_RST_B, 0);
+                gpio_export(TRSLAT_RST_B, false);
+        }
+
+        if (!gpio_request(SEL3, "sel3")) {
+                gpio_direction_input(SEL3);
+                gpio_export(SEL3, true);
+        }
+}
+/*
+ * system init for baseboard usage. Will be called by mx31moboard init.
+ */
+void __init mx31moboard_smartbot_init(void)
+{
+        printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
+
+        mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
+                "smartbot");
+
+        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+        smartbot_resets_init();
+
+        smartbot_cam_init();
+        platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
+}
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
new file mode 100644
index 00000000000..1576d51e676
--- /dev/null
+++ b/arch/arm/mach-mx5/Kconfig
@@ -0,0 +1,18 @@
+if ARCH_MX5
+
+config ARCH_MX51
+        bool
+        default y
+        select MXC_TZIC
+        select ARCH_MXC_IOMUX_V3
+
+comment "MX5 platforms:"
+
+config MACH_MX51_BABBAGE
+        bool "Support MX51 BABBAGE platforms"
+        help
+          Include support for MX51 Babbage platform, also known as MX51EVK in
+          u-boot. This includes specific configurations for the board and its
+          peripherals.
+
+endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
new file mode 100644
index 00000000000..bf23f869ef5
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+obj-y   := cpu.o mm.o clock-mx51.o devices.o
+
+obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
+
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y   := 0x90008000
+params_phys-y   := 0x90000100
+initrd_phys-y   := 0x90800000
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
new file mode 100644
index 00000000000..ee67a71db80
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx51.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+static struct platform_device *devices[] __initdata = {
+        &mxc_fec_device,
+};
+
+static struct pad_desc mx51babbage_pads[] = {
+        /* UART1 */
+        MX51_PAD_UART1_RXD__UART1_RXD,
+        MX51_PAD_UART1_TXD__UART1_TXD,
+        MX51_PAD_UART1_RTS__UART1_RTS,
+        MX51_PAD_UART1_CTS__UART1_CTS,
+
+        /* UART2 */
+        MX51_PAD_UART2_RXD__UART2_RXD,
+        MX51_PAD_UART2_TXD__UART2_TXD,
+
+        /* UART3 */
+        MX51_PAD_EIM_D25__UART3_RXD,
+        MX51_PAD_EIM_D26__UART3_TXD,
+        MX51_PAD_EIM_D27__UART3_RTS,
+        MX51_PAD_EIM_D24__UART3_CTS,
+};
+
+/* Serial ports */
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+        .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+        mxc_register_device(&mxc_uart_device0, &uart_pdata);
+        mxc_register_device(&mxc_uart_device1, &uart_pdata);
+        mxc_register_device(&mxc_uart_device2, &uart_pdata);
+}
+#else /* !SERIAL_IMX */
+static inline void mxc_init_imx_uart(void)
+{
+}
+#endif /* SERIAL_IMX */
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+        mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
+                                        ARRAY_SIZE(mx51babbage_pads));
+        mxc_init_imx_uart();
+        platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx51_babbage_timer_init(void)
+{
+        mx51_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mxc_timer = {
+        .init   = mx51_babbage_timer_init,
+};
+
+MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
+        /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
+        .phys_io = MX51_AIPS1_BASE_ADDR,
+        .io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+        .boot_params = PHYS_OFFSET + 0x100,
+        .map_io = mx51_map_io,
+        .init_irq = mx51_init_irq,
+        .init_machine = mxc_board_init,
+        .timer = &mxc_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c
new file mode 100644
index 00000000000..be90c03101c
--- /dev/null
+++ b/arch/arm/mach-mx5/clock-mx51.c
@@ -0,0 +1,825 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "crm_regs.h"
+
+/* External clock values passed-in by the board code */
+static unsigned long external_high_reference, external_low_reference;
+static unsigned long oscillator_reference, ckih2_reference;
+
+static struct clk osc_clk;
+static struct clk pll1_main_clk;
+static struct clk pll1_sw_clk;
+static struct clk pll2_sw_clk;
+static struct clk pll3_sw_clk;
+static struct clk lp_apm_clk;
+static struct clk periph_apm_clk;
+static struct clk ahb_clk;
+static struct clk ipg_clk;
+
+#define MAX_DPLL_WAIT_TRIES     1000 /* 1000 * udelay(1) = 1ms */
+
+static int _clk_ccgr_enable(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+
+        return 0;
+}
+
+static void _clk_ccgr_disable(struct clk *clk)
+{
+        u32 reg;
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
+        __raw_writel(reg, clk->enable_reg);
+
+}
+
+static void _clk_ccgr_disable_inwait(struct clk *clk)
+{
+        u32 reg;
+
+        reg = __raw_readl(clk->enable_reg);
+        reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
+        reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
+        __raw_writel(reg, clk->enable_reg);
+}
+
+/*
+ * For the 4-to-1 muxed input clock
+ */
+static inline u32 _get_mux(struct clk *parent, struct clk *m0,
+                           struct clk *m1, struct clk *m2, struct clk *m3)
+{
+        if (parent == m0)
+                return 0;
+        else if (parent == m1)
+                return 1;
+        else if (parent == m2)
+                return 2;
+        else if (parent == m3)
+                return 3;
+        else
+                BUG();
+
+        return -EINVAL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+        if (pll == &pll1_main_clk)
+                return MX51_DPLL1_BASE;
+        else if (pll == &pll2_sw_clk)
+                return MX51_DPLL2_BASE;
+        else if (pll == &pll3_sw_clk)
+                return MX51_DPLL3_BASE;
+        else
+                BUG();
+
+        return NULL;
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+        long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+        unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+        void __iomem *pllbase;
+        s64 temp;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        pllbase = _get_pll_base(clk);
+
+        dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+        pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+        dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+        if (pll_hfsm == 0) {
+                dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+                dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+                dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+        } else {
+                dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+                dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+                dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+        }
+        pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+        mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+        mfi = (mfi <= 5) ? 5 : mfi;
+        mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+        mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+        /* Sign extend to 32-bits */
+        if (mfn >= 0x04000000) {
+                mfn |= 0xFC000000;
+                mfn_abs = -mfn;
+        }
+
+        ref_clk = 2 * parent_rate;
+        if (dbl != 0)
+                ref_clk *= 2;
+
+        ref_clk /= (pdf + 1);
+        temp = (u64) ref_clk * mfn_abs;
+        do_div(temp, mfd + 1);
+        if (mfn < 0)
+                temp = -temp;
+        temp = (ref_clk * mfi) + temp;
+
+        return temp;
+}
+
+static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg;
+        void __iomem *pllbase;
+
+        long mfi, pdf, mfn, mfd = 999999;
+        s64 temp64;
+        unsigned long quad_parent_rate;
+        unsigned long pll_hfsm, dp_ctl;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        pllbase = _get_pll_base(clk);
+
+        quad_parent_rate = 4 * parent_rate;
+        pdf = mfi = -1;
+        while (++pdf < 16 && mfi < 5)
+                mfi = rate * (pdf+1) / quad_parent_rate;
+        if (mfi > 15)
+                return -EINVAL;
+        pdf--;
+
+        temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+        do_div(temp64, quad_parent_rate/1000000);
+        mfn = (long)temp64;
+
+        dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+        /* use dpdck0_2 */
+        __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+        pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+        if (pll_hfsm == 0) {
+                reg = mfi << 4 | pdf;
+                __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+                __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+                __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+        } else {
+                reg = mfi << 4 | pdf;
+                __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+                __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+                __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+        }
+
+        return 0;
+}
+
+static int _clk_pll_enable(struct clk *clk)
+{
+        u32 reg;
+        void __iomem *pllbase;
+        int i = 0;
+
+        pllbase = _get_pll_base(clk);
+        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+        __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+        /* Wait for lock */
+        do {
+                reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+                if (reg & MXC_PLL_DP_CTL_LRF)
+                        break;
+
+                udelay(1);
+        } while (++i < MAX_DPLL_WAIT_TRIES);
+
+        if (i == MAX_DPLL_WAIT_TRIES) {
+                pr_err("MX5: pll locking failed\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static void _clk_pll_disable(struct clk *clk)
+{
+        u32 reg;
+        void __iomem *pllbase;
+
+        pllbase = _get_pll_base(clk);
+        reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+        __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg, step;
+
+        reg = __raw_readl(MXC_CCM_CCSR);
+
+        /* When switching from pll_main_clk to a bypass clock, first select a
+         * multiplexed clock in 'step_sel', then shift the glitchless mux
+         * 'pll1_sw_clk_sel'.
+         *
+         * When switching back, do it in reverse order
+         */
+        if (parent == &pll1_main_clk) {
+                /* Switch to pll1_main_clk */
+                reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+                __raw_writel(reg, MXC_CCM_CCSR);
+                /* step_clk mux switched to lp_apm, to save power. */
+                reg = __raw_readl(MXC_CCM_CCSR);
+                reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+                reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
+                                MXC_CCM_CCSR_STEP_SEL_OFFSET);
+        } else {
+                if (parent == &lp_apm_clk) {
+                        step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
+                } else  if (parent == &pll2_sw_clk) {
+                        step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
+                } else  if (parent == &pll3_sw_clk) {
+                        step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
+                } else
+                        return -EINVAL;
+
+                reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
+                reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
+
+                __raw_writel(reg, MXC_CCM_CCSR);
+                /* Switch to step_clk */
+                reg = __raw_readl(MXC_CCM_CCSR);
+                reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
+        }
+        __raw_writel(reg, MXC_CCM_CCSR);
+        return 0;
+}
+
+static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
+{
+        u32 reg, div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(MXC_CCM_CCSR);
+
+        if (clk->parent == &pll2_sw_clk) {
+                div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
+                       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
+        } else if (clk->parent == &pll3_sw_clk) {
+                div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
+                       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
+        } else
+                div = 1;
+        return parent_rate / div;
+}
+
+static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CCSR);
+
+        if (parent == &pll2_sw_clk)
+                reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+        else
+                reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
+
+        __raw_writel(reg, MXC_CCM_CCSR);
+        return 0;
+}
+
+static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        if (parent == &osc_clk)
+                reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
+        else
+                return -EINVAL;
+
+        __raw_writel(reg, MXC_CCM_CCSR);
+
+        return 0;
+}
+
+static unsigned long clk_arm_get_rate(struct clk *clk)
+{
+        u32 cacrr, div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+        cacrr = __raw_readl(MXC_CCM_CACRR);
+        div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
+
+        return parent_rate / div;
+}
+
+static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg, mux;
+        int i = 0;
+
+        mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
+
+        reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
+        reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
+        __raw_writel(reg, MXC_CCM_CBCMR);
+
+        /* Wait for lock */
+        do {
+                reg = __raw_readl(MXC_CCM_CDHIPR);
+                if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
+                        break;
+
+                udelay(1);
+        } while (++i < MAX_DPLL_WAIT_TRIES);
+
+        if (i == MAX_DPLL_WAIT_TRIES) {
+                pr_err("MX5: Set parent for periph_apm clock failed\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CBCDR);
+
+        if (parent == &pll2_sw_clk)
+                reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+        else if (parent == &periph_apm_clk)
+                reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
+        else
+                return -EINVAL;
+
+        __raw_writel(reg, MXC_CCM_CBCDR);
+
+        return 0;
+}
+
+static struct clk main_bus_clk = {
+        .parent = &pll2_sw_clk,
+        .set_parent = _clk_main_bus_set_parent,
+};
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+        u32 reg, div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(MXC_CCM_CBCDR);
+        div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+               MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+        return parent_rate / div;
+}
+
+
+static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
+{
+        u32 reg, div;
+        unsigned long parent_rate;
+        int i = 0;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+        if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+                return -EINVAL;
+
+        reg = __raw_readl(MXC_CCM_CBCDR);
+        reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
+        reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
+        __raw_writel(reg, MXC_CCM_CBCDR);
+
+        /* Wait for lock */
+        do {
+                reg = __raw_readl(MXC_CCM_CDHIPR);
+                if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
+                        break;
+
+                udelay(1);
+        } while (++i < MAX_DPLL_WAIT_TRIES);
+
+        if (i == MAX_DPLL_WAIT_TRIES) {
+                pr_err("MX5: clk_ahb_set_rate failed\n");
+                return -EINVAL;
+        }
+
+        return 0;
+}
+
+static unsigned long _clk_ahb_round_rate(struct clk *clk,
+                                                unsigned long rate)
+{
+        u32 div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        div = parent_rate / rate;
+        if (div > 8)
+                div = 8;
+        else if (div == 0)
+                div++;
+        return parent_rate / div;
+}
+
+
+static int _clk_max_enable(struct clk *clk)
+{
+        u32 reg;
+
+        _clk_ccgr_enable(clk);
+
+        /* Handshake with MAX when LPM is entered. */
+        reg = __raw_readl(MXC_CCM_CLPCR);
+        reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+        __raw_writel(reg, MXC_CCM_CLPCR);
+
+        return 0;
+}
+
+static void _clk_max_disable(struct clk *clk)
+{
+        u32 reg;
+
+        _clk_ccgr_disable_inwait(clk);
+
+        /* No Handshake with MAX when LPM is entered as its disabled. */
+        reg = __raw_readl(MXC_CCM_CLPCR);
+        reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+        __raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+        u32 reg, div;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(MXC_CCM_CBCDR);
+        div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+               MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+        return parent_rate / div;
+}
+
+static unsigned long clk_ipg_per_get_rate(struct clk *clk)
+{
+        u32 reg, prediv1, prediv2, podf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
+                /* the main_bus_clk is the one before the DVFS engine */
+                reg = __raw_readl(MXC_CCM_CBCDR);
+                prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
+                           MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
+                prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
+                           MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
+                podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
+                        MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
+                return parent_rate / (prediv1 * prediv2 * podf);
+        } else if (clk->parent == &ipg_clk)
+                return parent_rate;
+        else
+                BUG();
+}
+
+static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg;
+
+        reg = __raw_readl(MXC_CCM_CBCMR);
+
+        reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+        reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+
+        if (parent == &ipg_clk)
+                reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
+        else if (parent == &lp_apm_clk)
+                reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
+        else if (parent != &main_bus_clk)
+                return -EINVAL;
+
+        __raw_writel(reg, MXC_CCM_CBCMR);
+
+        return 0;
+}
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+        u32 reg, prediv, podf;
+        unsigned long parent_rate;
+
+        parent_rate = clk_get_rate(clk->parent);
+
+        reg = __raw_readl(MXC_CCM_CSCDR1);
+        prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
+                  MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
+        podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
+                MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
+
+        return parent_rate / (prediv * podf);
+}
+
+static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
+{
+        u32 reg, mux;
+
+        mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
+                       &lp_apm_clk);
+        reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
+        reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
+        __raw_writel(reg, MXC_CCM_CSCMR1);
+
+        return 0;
+}
+
+static unsigned long get_high_reference_clock_rate(struct clk *clk)
+{
+        return external_high_reference;
+}
+
+static unsigned long get_low_reference_clock_rate(struct clk *clk)
+{
+        return external_low_reference;
+}
+
+static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
+{
+        return oscillator_reference;
+}
+
+static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
+{
+        return ckih2_reference;
+}
+
+/* External high frequency clock */
+static struct clk ckih_clk = {
+        .get_rate = get_high_reference_clock_rate,
+};
+
+static struct clk ckih2_clk = {
+        .get_rate = get_ckih2_reference_clock_rate,
+};
+
+static struct clk osc_clk = {
+        .get_rate = get_oscillator_reference_clock_rate,
+};
+
+/* External low frequency (32kHz) clock */
+static struct clk ckil_clk = {
+        .get_rate = get_low_reference_clock_rate,
+};
+
+static struct clk pll1_main_clk = {
+        .parent = &osc_clk,
+        .get_rate = clk_pll_get_rate,
+        .enable = _clk_pll_enable,
+        .disable = _clk_pll_disable,
+};
+
+/* Clock tree block diagram (WIP):
+ *      CCM: Clock Controller Module
+ *
+ * PLL output -> |
+ *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
+ * PLL bypass -> |
+ *
+ */
+
+/* PLL1 SW supplies to ARM core */
+static struct clk pll1_sw_clk = {
+        .parent = &pll1_main_clk,
+        .set_parent = _clk_pll1_sw_set_parent,
+        .get_rate = clk_pll1_sw_get_rate,
+};
+
+/* PLL2 SW supplies to AXI/AHB/IP buses */
+static struct clk pll2_sw_clk = {
+        .parent = &osc_clk,
+        .get_rate = clk_pll_get_rate,
+        .set_rate = _clk_pll_set_rate,
+        .set_parent = _clk_pll2_sw_set_parent,
+        .enable = _clk_pll_enable,
+        .disable = _clk_pll_disable,
+};
+
+/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
+static struct clk pll3_sw_clk = {
+        .parent = &osc_clk,
+        .set_rate = _clk_pll_set_rate,
+        .get_rate = clk_pll_get_rate,
+        .enable = _clk_pll_enable,
+        .disable = _clk_pll_disable,
+};
+
+/* Low-power Audio Playback Mode clock */
+static struct clk lp_apm_clk = {
+        .parent = &osc_clk,
+        .set_parent = _clk_lp_apm_set_parent,
+};
+
+static struct clk periph_apm_clk = {
+        .parent = &pll1_sw_clk,
+        .set_parent = _clk_periph_apm_set_parent,
+};
+
+static struct clk cpu_clk = {
+        .parent = &pll1_sw_clk,
+        .get_rate = clk_arm_get_rate,
+};
+
+static struct clk ahb_clk = {
+        .parent = &main_bus_clk,
+        .get_rate = clk_ahb_get_rate,
+        .set_rate = _clk_ahb_set_rate,
+        .round_rate = _clk_ahb_round_rate,
+};
+
+/* Main IP interface clock for access to registers */
+static struct clk ipg_clk = {
+        .parent = &ahb_clk,
+        .get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ipg_perclk = {
+        .parent = &lp_apm_clk,
+        .get_rate = clk_ipg_per_get_rate,
+        .set_parent = _clk_ipg_per_set_parent,
+};
+
+static struct clk uart_root_clk = {
+        .parent = &pll2_sw_clk,
+        .get_rate = clk_uart_get_rate,
+        .set_parent = _clk_uart_set_parent,
+};
+
+static struct clk ahb_max_clk = {
+        .parent = &ahb_clk,
+        .enable_reg = MXC_CCM_CCGR0,
+        .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+        .enable = _clk_max_enable,
+        .disable = _clk_max_disable,
+};
+
+static struct clk aips_tz1_clk = {
+        .parent = &ahb_clk,
+        .secondary = &ahb_max_clk,
+        .enable_reg = MXC_CCM_CCGR0,
+        .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
+        .enable = _clk_ccgr_enable,
+        .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk aips_tz2_clk = {
+        .parent = &ahb_clk,
+        .secondary = &ahb_max_clk,
+        .enable_reg = MXC_CCM_CCGR0,
+        .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+        .enable = _clk_ccgr_enable,
+        .disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk gpt_32k_clk = {
+        .id = 0,
+        .parent = &ckil_clk,
+};
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)     \
+        static struct clk name = {                      \
+                .id             = i,                    \
+                .enable_reg     = er,                   \
+                .enable_shift   = es,                   \
+                .get_rate       = gr,                   \
+                .set_rate       = sr,                   \
+                .enable         = _clk_ccgr_enable,     \
+                .disable        = _clk_ccgr_disable,    \
+                .parent         = p,                    \
+                .secondary      = s,                    \
+        }
+
+/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
+   get_rate, set_rate, parent, secondary); */
+
+/* Shared peripheral bus arbiter */
+DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
+        NULL,  NULL, &ipg_clk, NULL);
+
+/* UART */
+DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
+        NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
+        NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
+        NULL,  NULL, &uart_root_clk, NULL);
+DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
+        NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
+        NULL,  NULL, &ipg_clk, &aips_tz1_clk);
+DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
+        NULL,  NULL, &ipg_clk, &spba_clk);
+
+/* GPT */
+DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
+        NULL,  NULL, &ipg_perclk, NULL);
+DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
+        NULL,  NULL, &ipg_clk, NULL);
+
+/* FEC */
+DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
+        NULL,  NULL, &ipg_clk, NULL);
+
+#define _REGISTER_CLOCK(d, n, c) \
+       { \
+                .dev_id = d, \
+                .con_id = n, \
+                .clk = &c,   \
+       },
+
+static struct clk_lookup lookups[] = {
+        _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+        _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+        _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+        _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+        _REGISTER_CLOCK("fec.0", NULL, fec_clk)
+};
+
+static void clk_tree_init(void)
+{
+        u32 reg;
+
+        ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
+
+        /*
+         * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
+         * 8MHz, its derived from lp_apm.
+         *
+         * FIXME: Verify if true for all boards
+         */
+        reg = __raw_readl(MXC_CCM_CBCDR);
+        reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
+        reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
+        reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
+        reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
+        __raw_writel(reg, MXC_CCM_CBCDR);
+}
+
+int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
+                        unsigned long ckih1, unsigned long ckih2)
+{
+        int i;
+
+        external_low_reference = ckil;
+        external_high_reference = ckih1;
+        ckih2_reference = ckih2;
+        oscillator_reference = osc;
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++)
+                clkdev_add(&lookups[i]);
+
+        clk_tree_init();
+
+        clk_enable(&cpu_clk);
+        clk_enable(&main_bus_clk);
+
+        /* System timer */
+        mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+                MX51_MXC_INT_GPT);
+        return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
new file mode 100644
index 00000000000..41c769f08c4
--- /dev/null
+++ b/arch/arm/mach-mx5/cpu.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This file contains the CPU initialization code.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+static int __init post_cpu_init(void)
+{
+        unsigned int reg;
+        void __iomem *base;
+
+        if (!cpu_is_mx51())
+                return 0;
+
+        base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+        __raw_writel(0x0, base + 0x40);
+        __raw_writel(0x0, base + 0x44);
+        __raw_writel(0x0, base + 0x48);
+        __raw_writel(0x0, base + 0x4C);
+        reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+        __raw_writel(reg, base + 0x50);
+
+        base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+        __raw_writel(0x0, base + 0x40);
+        __raw_writel(0x0, base + 0x44);
+        __raw_writel(0x0, base + 0x48);
+        __raw_writel(0x0, base + 0x4C);
+        reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+        __raw_writel(reg, base + 0x50);
+
+        return 0;
+}
+
+postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
new file mode 100644
index 00000000000..c776b9af062
--- /dev/null
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -0,0 +1,583 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
+
+#define MX51_CCM_BASE           MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
+#define MX51_DPLL1_BASE         MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
+#define MX51_DPLL2_BASE         MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
+#define MX51_DPLL3_BASE         MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
+#define MX51_CORTEXA8_BASE      MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
+#define MX51_GPC_BASE           MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL                  0x00
+#define MXC_PLL_DP_CONFIG               0x04
+#define MXC_PLL_DP_OP                   0x08
+#define MXC_PLL_DP_MFD                  0x0C
+#define MXC_PLL_DP_MFN                  0x10
+#define MXC_PLL_DP_MFNMINUS             0x14
+#define MXC_PLL_DP_MFNPLUS              0x18
+#define MXC_PLL_DP_HFS_OP               0x1C
+#define MXC_PLL_DP_HFS_MFD              0x20
+#define MXC_PLL_DP_HFS_MFN              0x24
+#define MXC_PLL_DP_MFN_TOGC             0x28
+#define MXC_PLL_DP_DESTAT               0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL         0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN      0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET  12
+#define MXC_PLL_DP_CTL_ADE              0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV      0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET       8
+#define MXC_PLL_DP_CTL_HFSM             0x80
+#define MXC_PLL_DP_CTL_PRE              0x40
+#define MXC_PLL_DP_CTL_UPEN             0x20
+#define MXC_PLL_DP_CTL_RST              0x10
+#define MXC_PLL_DP_CTL_RCP              0x8
+#define MXC_PLL_DP_CTL_PLM              0x4
+#define MXC_PLL_DP_CTL_BRM0             0x2
+#define MXC_PLL_DP_CTL_LRF              0x1
+
+#define MXC_PLL_DP_CONFIG_BIST          0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE        0x4
+#define MXC_PLL_DP_CONFIG_AREN          0x2
+#define MXC_PLL_DP_CONFIG_LDREQ         0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET        4
+#define MXC_PLL_DP_OP_MFI_MASK          (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET        0
+#define MXC_PLL_DP_OP_PDF_MASK          0xF
+
+#define MXC_PLL_DP_MFD_OFFSET           0
+#define MXC_PLL_DP_MFD_MASK             0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET           0x0
+#define MXC_PLL_DP_MFN_MASK             0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS     (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN      (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET  0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK    0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL       (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN           0x07FFFFFF
+
+/* Register addresses of CCM*/
+#define MXC_CCM_CCR             (MX51_CCM_BASE + 0x00)
+#define MXC_CCM_CCDR            (MX51_CCM_BASE + 0x04)
+#define MXC_CCM_CSR             (MX51_CCM_BASE + 0x08)
+#define MXC_CCM_CCSR            (MX51_CCM_BASE + 0x0C)
+#define MXC_CCM_CACRR           (MX51_CCM_BASE + 0x10)
+#define MXC_CCM_CBCDR           (MX51_CCM_BASE + 0x14)
+#define MXC_CCM_CBCMR           (MX51_CCM_BASE + 0x18)
+#define MXC_CCM_CSCMR1          (MX51_CCM_BASE + 0x1C)
+#define MXC_CCM_CSCMR2          (MX51_CCM_BASE + 0x20)
+#define MXC_CCM_CSCDR1          (MX51_CCM_BASE + 0x24)
+#define MXC_CCM_CS1CDR          (MX51_CCM_BASE + 0x28)
+#define MXC_CCM_CS2CDR          (MX51_CCM_BASE + 0x2C)
+#define MXC_CCM_CDCDR           (MX51_CCM_BASE + 0x30)
+#define MXC_CCM_CHSCDR          (MX51_CCM_BASE + 0x34)
+#define MXC_CCM_CSCDR2          (MX51_CCM_BASE + 0x38)
+#define MXC_CCM_CSCDR3          (MX51_CCM_BASE + 0x3C)
+#define MXC_CCM_CSCDR4          (MX51_CCM_BASE + 0x40)
+#define MXC_CCM_CWDR            (MX51_CCM_BASE + 0x44)
+#define MXC_CCM_CDHIPR          (MX51_CCM_BASE + 0x48)
+#define MXC_CCM_CDCR            (MX51_CCM_BASE + 0x4C)
+#define MXC_CCM_CTOR            (MX51_CCM_BASE + 0x50)
+#define MXC_CCM_CLPCR           (MX51_CCM_BASE + 0x54)
+#define MXC_CCM_CISR            (MX51_CCM_BASE + 0x58)
+#define MXC_CCM_CIMR            (MX51_CCM_BASE + 0x5C)
+#define MXC_CCM_CCOSR           (MX51_CCM_BASE + 0x60)
+#define MXC_CCM_CGPR            (MX51_CCM_BASE + 0x64)
+#define MXC_CCM_CCGR0           (MX51_CCM_BASE + 0x68)
+#define MXC_CCM_CCGR1           (MX51_CCM_BASE + 0x6C)
+#define MXC_CCM_CCGR2           (MX51_CCM_BASE + 0x70)
+#define MXC_CCM_CCGR3           (MX51_CCM_BASE + 0x74)
+#define MXC_CCM_CCGR4           (MX51_CCM_BASE + 0x78)
+#define MXC_CCM_CCGR5           (MX51_CCM_BASE + 0x7C)
+#define MXC_CCM_CCGR6           (MX51_CCM_BASE + 0x80)
+#define MXC_CCM_CMEOR           (MX51_CCM_BASE + 0x84)
+
+/* Define the bits in register CCR */
+#define MXC_CCM_CCR_COSC_EN             (1 << 12)
+#define MXC_CCM_CCR_FPM_MULT_MASK       (1 << 11)
+#define MXC_CCM_CCR_CAMP2_EN            (1 << 10)
+#define MXC_CCM_CCR_CAMP1_EN            (1 << 9)
+#define MXC_CCM_CCR_FPM_EN              (1 << 8)
+#define MXC_CCM_CCR_OSCNT_OFFSET        (0)
+#define MXC_CCM_CCR_OSCNT_MASK  (0xFF)
+
+/* Define the bits in register CCDR */
+#define MXC_CCM_CCDR_HSC_HS_MASK        (0x1 << 18)
+#define MXC_CCM_CCDR_IPU_HS_MASK        (0x1 << 17)
+#define MXC_CCM_CCDR_EMI_HS_MASK        (0x1 << 16)
+
+/* Define the bits in register CSR */
+#define MXC_CCM_CSR_COSR_READY  (1 << 5)
+#define MXC_CCM_CSR_LVS_VALUE   (1 << 4)
+#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
+#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
+#define MXC_CCM_CSR_FPM_READY   (1 << 1)
+#define MXC_CCM_CSR_REF_EN_B    (1 << 0)
+
+/* Define the bits in register CCSR */
+#define MXC_CCM_CCSR_LP_APM_SEL         (0x1 << 9)
+#define MXC_CCM_CCSR_STEP_SEL_OFFSET    (7)
+#define MXC_CCM_CCSR_STEP_SEL_MASK      (0x3 << 7)
+#define MXC_CCM_CCSR_STEP_SEL_LP_APM       0
+#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
+#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
+#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
+#define MXC_CCM_CCSR_PLL2_PODF_OFFSET   (5)
+#define MXC_CCM_CCSR_PLL2_PODF_MASK     (0x3 << 5)
+#define MXC_CCM_CCSR_PLL3_PODF_OFFSET   (3)
+#define MXC_CCM_CCSR_PLL3_PODF_MASK     (0x3 << 3)
+#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL    (1 << 2) /* 0: pll1_main_clk,
+                                                    1: step_clk */
+#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL    (1 << 1)
+#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL    (1 << 0)
+
+/* Define the bits in register CACRR */
+#define MXC_CCM_CACRR_ARM_PODF_OFFSET   (0)
+#define MXC_CCM_CACRR_ARM_PODF_MASK     (0x7)
+
+/* Define the bits in register CBCDR */
+#define MXC_CCM_CBCDR_EMI_CLK_SEL               (0x1 << 26)
+#define MXC_CCM_CBCDR_PERIPH_CLK_SEL            (0x1 << 25)
+#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET         (30)
+#define MXC_CCM_CBCDR_DDR_HF_SEL                (0x1 << 30)
+#define MXC_CCM_CBCDR_DDR_PODF_OFFSET           (27)
+#define MXC_CCM_CBCDR_DDR_PODF_MASK             (0x7 << 27)
+#define MXC_CCM_CBCDR_EMI_PODF_OFFSET           (22)
+#define MXC_CCM_CBCDR_EMI_PODF_MASK             (0x7 << 22)
+#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET         (19)
+#define MXC_CCM_CBCDR_AXI_B_PODF_MASK           (0x7 << 19)
+#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET         (16)
+#define MXC_CCM_CBCDR_AXI_A_PODF_MASK           (0x7 << 16)
+#define MXC_CCM_CBCDR_NFC_PODF_OFFSET           (13)
+#define MXC_CCM_CBCDR_NFC_PODF_MASK             (0x7 << 13)
+#define MXC_CCM_CBCDR_AHB_PODF_OFFSET           (10)
+#define MXC_CCM_CBCDR_AHB_PODF_MASK             (0x7 << 10)
+#define MXC_CCM_CBCDR_IPG_PODF_OFFSET           (8)
+#define MXC_CCM_CBCDR_IPG_PODF_MASK             (0x3 << 8)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET       (6)
+#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK         (0x3 << 6)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET       (3)
+#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK         (0x7 << 3)
+#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET        (0)
+#define MXC_CCM_CBCDR_PERCLK_PODF_MASK          (0x7)
+
+/* Define the bits in register CBCMR */
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET    (14)
+#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK      (0x3 << 14)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET     (12)
+#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK       (0x3 << 12)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET        (10)
+#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK          (0x3 << 10)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET    (8)
+#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK      (0x3 << 8)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET    (6)
+#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK      (0x3 << 6)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET        (4)
+#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK          (0x3 << 4)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET      (14)
+#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK        (0x3 << 14)
+#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL     (0x1 << 1)
+#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL        (0x1 << 0)
+
+/* Define the bits in register CSCMR1 */
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET          (30)
+#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK            (0x3 << 30)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET          (28)
+#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK            (0x3 << 28)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET           (26)
+#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL                  (0x1 << 26)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET              (24)
+#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK                (0x3 << 24)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET            (22)
+#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK              (0x3 << 22)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET      (20)
+#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK        (0x3 << 20)
+#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL                   (0x1 << 19)
+#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL                   (0x1 << 18)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET      (16)
+#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK        (0x3 << 16)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET              (14)
+#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK                (0x3 << 14)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET              (12)
+#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK                (0x3 << 12)
+#define MXC_CCM_CSCMR1_SSI3_CLK_SEL                     (0x1 << 11)
+#define MXC_CCM_CSCMR1_VPU_RCLK_SEL                     (0x1 << 10)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET           (8)
+#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK             (0x3 << 8)
+#define MXC_CCM_CSCMR1_TVE_CLK_SEL                      (0x1 << 7)
+#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL                  (0x1 << 6)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET              (4)
+#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK                (0x3 << 4)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET             (2)
+#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK               (0x3 << 2)
+#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL             (0x1 << 1)
+#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL             (0x1)
+
+/* Define the bits in register CSCMR2 */
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)             (26+n*3)
+#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)               (0x7 << (26+n*3))
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET         (24)
+#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK           (0x3 << 24)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET         (22)
+#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK           (0x3 << 22)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET               (20)
+#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK                 (0x3 << 20)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET              (18)
+#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK                (0x3 << 18)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET              (16)
+#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK                (0x3 << 16)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET             (14)
+#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK               (0x3 << 14)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET              (12)
+#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK                (0x3 << 12)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET               (10)
+#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK                 (0x3 << 10)
+#define MXC_CCM_CSCMR2_SLIMBUS_COM                      (0x1 << 9)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET           (6)
+#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK             (0x7 << 6)
+#define MXC_CCM_CSCMR2_SPDIF1_COM                       (1 << 5)
+#define MXC_CCM_CSCMR2_SPDIF0_COM                       (1 << 4)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET            (2)
+#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK              (0x3 << 2)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET            (0)
+#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK              (0x3)
+
+/* Define the bits in register CSCDR1 */
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET     (22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK       (0x7 << 22)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET     (19)
+#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK       (0x7 << 19)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET     (16)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK       (0x7 << 16)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET              (14)
+#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK                (0x3 << 14)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET     (11)
+#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK       (0x7 << 11)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET           (8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK             (0x7 << 8)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET           (6)
+#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK             (0x3 << 6)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET             (3)
+#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK               (0x7 << 3)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET             (0)
+#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK               (0x7)
+
+/* Define the bits in register CS1CDR and CS2CDR */
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET         (22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK           (0x7 << 22)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET         (16)
+#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK           (0x3F << 16)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET             (6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK               (0x7 << 6)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET             (0)
+#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK               (0x3F)
+
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET         (22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK           (0x7 << 22)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET         (16)
+#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK           (0x3F << 16)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET             (6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK               (0x7 << 6)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET             (0)
+#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK               (0x3F)
+
+/* Define the bits in register CDCDR */
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET               (28)
+#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK                 (0x7 << 28)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET            (25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK              (0x7 << 25)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET            (19)
+#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK              (0x3F << 19)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET            (16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK              (0x7 << 16)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET            (9)
+#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK              (0x3F << 9)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET                (6)
+#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK                  (0x7 << 6)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET               (3)
+#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK                 (0x7 << 3)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET               (0)
+#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK                 (0x7)
+
+/* Define the bits in register CHSCCDR */
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET             (12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK               (0x7 << 12)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET             (6)
+#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK               (0x3F << 6)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET            (3)
+#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK              (0x7 << 3)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET            (0)
+#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK              (0x7)
+
+/* Define the bits in register CSCDR2 */
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET             (25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK               (0x7 << 25)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET             (19)
+#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK               (0x3F << 19)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET              (16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK                (0x7 << 16)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET              (9)
+#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK                (0x3F << 9)
+#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET          (6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK                (0x7 << 6)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET              (0)
+#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK                (0x3F)
+
+/* Define the bits in register CSCDR3 */
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET            (16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK              (0x7 << 16)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET            (9)
+#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK              (0x3F << 9)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET             (6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK               (0x7 << 6)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET             (0)
+#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK               (0x3F)
+
+/* Define the bits in register CSCDR4 */
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET        (16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK          (0x7 << 16)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET        (9)
+#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK          (0x3F << 9)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET        (6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK          (0x7 << 6)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET        (0)
+#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK          (0x3F)
+
+/* Define the bits in register CDHIPR */
+#define MXC_CCM_CDHIPR_ARM_PODF_BUSY                    (1 << 16)
+#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY              (1 << 8)
+#define MXC_CCM_CDHIPR_DDR_PODF_BUSY                    (1 << 7)
+#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY                 (1 << 6)
+#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY              (1 << 5)
+#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY        (1 << 4)
+#define MXC_CCM_CDHIPR_AHB_PODF_BUSY                    (1 << 3)
+#define MXC_CCM_CDHIPR_EMI_PODF_BUSY                    (1 << 2)
+#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY                  (1 << 1)
+#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY                  (1 << 0)
+
+/* Define the bits in register CDCR */
+#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER             (0x1 << 2)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET        (0)
+#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK          (0x3)
+
+/* Define the bits in register CLPCR */
+#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS         (0x1 << 23)
+#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS         (0x1 << 22)
+#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS         (0x1 << 21)
+#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS        (0x1 << 20)
+#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS         (0x1 << 19)
+#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS         (0x1 << 18)
+#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS        (0x1 << 17)
+#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS        (0x1 << 16)
+#define MXC_CCM_CLPCR_COSC_PWRDOWN              (0x1 << 11)
+#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET         (9)
+#define MXC_CCM_CLPCR_STBY_COUNT_MASK           (0x3 << 9)
+#define MXC_CCM_CLPCR_VSTBY                     (0x1 << 8)
+#define MXC_CCM_CLPCR_DIS_REF_OSC               (0x1 << 7)
+#define MXC_CCM_CLPCR_SBYOS                     (0x1 << 6)
+#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM        (0x1 << 5)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET       (3)
+#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK         (0x3 << 3)
+#define MXC_CCM_CLPCR_LPM_OFFSET                (0)
+#define MXC_CCM_CLPCR_LPM_MASK                  (0x3)
+
+/* Define the bits in register CISR */
+#define MXC_CCM_CISR_ARM_PODF_LOADED                    (0x1 << 25)
+#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED        (0x1 << 21)
+#define MXC_CCM_CISR_AHB_PODF_LOADED                    (0x1 << 20)
+#define MXC_CCM_CISR_EMI_PODF_LOADED                    (0x1 << 19)
+#define MXC_CCM_CISR_AXI_B_PODF_LOADED                  (0x1 << 18)
+#define MXC_CCM_CISR_AXI_A_PODF_LOADED                  (0x1 << 17)
+#define MXC_CCM_CISR_DIVIDER_LOADED                     (0x1 << 16)
+#define MXC_CCM_CISR_COSC_READY                         (0x1 << 6)
+#define MXC_CCM_CISR_CKIH2_READY                        (0x1 << 5)
+#define MXC_CCM_CISR_CKIH_READY                         (0x1 << 4)
+#define MXC_CCM_CISR_FPM_READY                          (0x1 << 3)
+#define MXC_CCM_CISR_LRF_PLL3                           (0x1 << 2)
+#define MXC_CCM_CISR_LRF_PLL2                           (0x1 << 1)
+#define MXC_CCM_CISR_LRF_PLL1                           (0x1)
+
+/* Define the bits in register CIMR */
+#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED               (0x1 << 25)
+#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED   (0x1 << 21)
+#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED               (0x1 << 20)
+#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED             (0x1 << 19)
+#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED             (0x1 << 18)
+#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED             (0x1 << 17)
+#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED                (0x1 << 16)
+#define MXC_CCM_CIMR_MASK_COSC_READY                    (0x1 << 5)
+#define MXC_CCM_CIMR_MASK_CKIH_READY                    (0x1 << 4)
+#define MXC_CCM_CIMR_MASK_FPM_READY                     (0x1 << 3)
+#define MXC_CCM_CIMR_MASK_LRF_PLL3                      (0x1 << 2)
+#define MXC_CCM_CIMR_MASK_LRF_PLL2                      (0x1 << 1)
+#define MXC_CCM_CIMR_MASK_LRF_PLL1                      (0x1)
+
+/* Define the bits in register CCOSR */
+#define MXC_CCM_CCOSR_CKO2_EN_OFFSET                    (0x1 << 24)
+#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET                   (21)
+#define MXC_CCM_CCOSR_CKO2_DIV_MASK                     (0x7 << 21)
+#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET                   (16)
+#define MXC_CCM_CCOSR_CKO2_SEL_MASK                     (0x1F << 16)
+#define MXC_CCM_CCOSR_CKOL_EN                           (0x1 << 7)
+#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET                   (4)
+#define MXC_CCM_CCOSR_CKOL_DIV_MASK                     (0x7 << 4)
+#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET                   (0)
+#define MXC_CCM_CCOSR_CKOL_SEL_MASK                     (0xF)
+
+/* Define the bits in registers CGPR */
+#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE             (0x1 << 4)
+#define MXC_CCM_CGPR_FPM_SEL                            (0x1 << 3)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET            (0)
+#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK              (0x7)
+
+/* Define the bits in registers CCGRx */
+#define MXC_CCM_CCGRx_CG_MASK                           0x3
+#define MXC_CCM_CCGRx_MOD_OFF                           0x0
+#define MXC_CCM_CCGRx_MOD_ON                            0x3
+#define MXC_CCM_CCGRx_MOD_IDLE                          0x1
+
+#define MXC_CCM_CCGRx_CG15_MASK                         (0x3 << 30)
+#define MXC_CCM_CCGRx_CG14_MASK                         (0x3 << 28)
+#define MXC_CCM_CCGRx_CG13_MASK                         (0x3 << 26)
+#define MXC_CCM_CCGRx_CG12_MASK                         (0x3 << 24)
+#define MXC_CCM_CCGRx_CG11_MASK                         (0x3 << 22)
+#define MXC_CCM_CCGRx_CG10_MASK                         (0x3 << 20)
+#define MXC_CCM_CCGRx_CG9_MASK                          (0x3 << 18)
+#define MXC_CCM_CCGRx_CG8_MASK                          (0x3 << 16)
+#define MXC_CCM_CCGRx_CG5_MASK                          (0x3 << 10)
+#define MXC_CCM_CCGRx_CG4_MASK                          (0x3 << 8)
+#define MXC_CCM_CCGRx_CG3_MASK                          (0x3 << 6)
+#define MXC_CCM_CCGRx_CG2_MASK                          (0x3 << 4)
+#define MXC_CCM_CCGRx_CG1_MASK                          (0x3 << 2)
+#define MXC_CCM_CCGRx_CG0_MASK                          (0x3 << 0)
+
+#define MXC_CCM_CCGRx_CG15_OFFSET                       30
+#define MXC_CCM_CCGRx_CG14_OFFSET                       28
+#define MXC_CCM_CCGRx_CG13_OFFSET                       26
+#define MXC_CCM_CCGRx_CG12_OFFSET                       24
+#define MXC_CCM_CCGRx_CG11_OFFSET                       22
+#define MXC_CCM_CCGRx_CG10_OFFSET                       20
+#define MXC_CCM_CCGRx_CG9_OFFSET                        18
+#define MXC_CCM_CCGRx_CG8_OFFSET                        16
+#define MXC_CCM_CCGRx_CG7_OFFSET                        14
+#define MXC_CCM_CCGRx_CG6_OFFSET                        12
+#define MXC_CCM_CCGRx_CG5_OFFSET                        10
+#define MXC_CCM_CCGRx_CG4_OFFSET                        8
+#define MXC_CCM_CCGRx_CG3_OFFSET                        6
+#define MXC_CCM_CCGRx_CG2_OFFSET                        4
+#define MXC_CCM_CCGRx_CG1_OFFSET                        2
+#define MXC_CCM_CCGRx_CG0_OFFSET                        0
+
+#define MXC_DPTC_LP_BASE        (MX51_GPC_BASE + 0x80)
+#define MXC_DPTC_GP_BASE        (MX51_GPC_BASE + 0x100)
+#define MXC_DVFS_CORE_BASE      (MX51_GPC_BASE + 0x180)
+#define MXC_DPTC_PER_BASE       (MX51_GPC_BASE + 0x1C0)
+#define MXC_PGC_IPU_BASE        (MX51_GPC_BASE + 0x220)
+#define MXC_PGC_VPU_BASE        (MX51_GPC_BASE + 0x240)
+#define MXC_PGC_GPU_BASE        (MX51_GPC_BASE + 0x260)
+#define MXC_SRPG_NEON_BASE      (MX51_GPC_BASE + 0x280)
+#define MXC_SRPG_ARM_BASE       (MX51_GPC_BASE + 0x2A0)
+#define MXC_SRPG_EMPGC0_BASE    (MX51_GPC_BASE + 0x2C0)
+#define MXC_SRPG_EMPGC1_BASE    (MX51_GPC_BASE + 0x2D0)
+#define MXC_SRPG_MEGAMIX_BASE   (MX51_GPC_BASE + 0x2E0)
+#define MXC_SRPG_EMI_BASE       (MX51_GPC_BASE + 0x300)
+
+/* CORTEXA8 platform */
+#define MXC_CORTEXA8_PLAT_PVID          (MX51_CORTEXA8_BASE + 0x0)
+#define MXC_CORTEXA8_PLAT_GPC           (MX51_CORTEXA8_BASE + 0x4)
+#define MXC_CORTEXA8_PLAT_PIC           (MX51_CORTEXA8_BASE + 0x8)
+#define MXC_CORTEXA8_PLAT_LPC           (MX51_CORTEXA8_BASE + 0xC)
+#define MXC_CORTEXA8_PLAT_NEON_LPC      (MX51_CORTEXA8_BASE + 0x10)
+#define MXC_CORTEXA8_PLAT_ICGC          (MX51_CORTEXA8_BASE + 0x14)
+#define MXC_CORTEXA8_PLAT_AMC           (MX51_CORTEXA8_BASE + 0x18)
+#define MXC_CORTEXA8_PLAT_NMC           (MX51_CORTEXA8_BASE + 0x20)
+#define MXC_CORTEXA8_PLAT_NMS           (MX51_CORTEXA8_BASE + 0x24)
+
+/* DVFS CORE */
+#define MXC_DVFSTHRS            (MXC_DVFS_CORE_BASE + 0x00)
+#define MXC_DVFSCOUN            (MXC_DVFS_CORE_BASE + 0x04)
+#define MXC_DVFSSIG1            (MXC_DVFS_CORE_BASE + 0x08)
+#define MXC_DVFSSIG0            (MXC_DVFS_CORE_BASE + 0x0C)
+#define MXC_DVFSGPC0            (MXC_DVFS_CORE_BASE + 0x10)
+#define MXC_DVFSGPC1            (MXC_DVFS_CORE_BASE + 0x14)
+#define MXC_DVFSGPBT            (MXC_DVFS_CORE_BASE + 0x18)
+#define MXC_DVFSEMAC            (MXC_DVFS_CORE_BASE + 0x1C)
+#define MXC_DVFSCNTR            (MXC_DVFS_CORE_BASE + 0x20)
+#define MXC_DVFSLTR0_0          (MXC_DVFS_CORE_BASE + 0x24)
+#define MXC_DVFSLTR0_1          (MXC_DVFS_CORE_BASE + 0x28)
+#define MXC_DVFSLTR1_0          (MXC_DVFS_CORE_BASE + 0x2C)
+#define MXC_DVFSLTR1_1          (MXC_DVFS_CORE_BASE + 0x30)
+#define MXC_DVFSPT0             (MXC_DVFS_CORE_BASE + 0x34)
+#define MXC_DVFSPT1             (MXC_DVFS_CORE_BASE + 0x38)
+#define MXC_DVFSPT2             (MXC_DVFS_CORE_BASE + 0x3C)
+#define MXC_DVFSPT3             (MXC_DVFS_CORE_BASE + 0x40)
+
+/* GPC */
+#define MXC_GPC_CNTR            (MX51_GPC_BASE + 0x0)
+#define MXC_GPC_PGR             (MX51_GPC_BASE + 0x4)
+#define MXC_GPC_VCR             (MX51_GPC_BASE + 0x8)
+#define MXC_GPC_ALL_PU          (MX51_GPC_BASE + 0xC)
+#define MXC_GPC_NEON            (MX51_GPC_BASE + 0x10)
+#define MXC_GPC_PGR_ARMPG_OFFSET        8
+#define MXC_GPC_PGR_ARMPG_MASK          (3 << 8)
+
+/* PGC */
+#define MXC_PGC_IPU_PGCR        (MXC_PGC_IPU_BASE + 0x0)
+#define MXC_PGC_IPU_PGSR        (MXC_PGC_IPU_BASE + 0xC)
+#define MXC_PGC_VPU_PGCR        (MXC_PGC_VPU_BASE + 0x0)
+#define MXC_PGC_VPU_PGSR        (MXC_PGC_VPU_BASE + 0xC)
+#define MXC_PGC_GPU_PGCR        (MXC_PGC_GPU_BASE + 0x0)
+#define MXC_PGC_GPU_PGSR        (MXC_PGC_GPU_BASE + 0xC)
+
+#define MXC_PGCR_PCR            1
+#define MXC_SRPGCR_PCR          1
+#define MXC_EMPGCR_PCR          1
+#define MXC_PGSR_PSR            1
+
+
+#define MXC_CORTEXA8_PLAT_LPC_DSM       (1 << 0)
+#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM   (1 << 1)
+
+/* SRPG */
+#define MXC_SRPG_NEON_SRPGCR    (MXC_SRPG_NEON_BASE + 0x0)
+#define MXC_SRPG_NEON_PUPSCR    (MXC_SRPG_NEON_BASE + 0x4)
+#define MXC_SRPG_NEON_PDNSCR    (MXC_SRPG_NEON_BASE + 0x8)
+
+#define MXC_SRPG_ARM_SRPGCR     (MXC_SRPG_ARM_BASE + 0x0)
+#define MXC_SRPG_ARM_PUPSCR     (MXC_SRPG_ARM_BASE + 0x4)
+#define MXC_SRPG_ARM_PDNSCR     (MXC_SRPG_ARM_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC0_SRPGCR  (MXC_SRPG_EMPGC0_BASE + 0x0)
+#define MXC_SRPG_EMPGC0_PUPSCR  (MXC_SRPG_EMPGC0_BASE + 0x4)
+#define MXC_SRPG_EMPGC0_PDNSCR  (MXC_SRPG_EMPGC0_BASE + 0x8)
+
+#define MXC_SRPG_EMPGC1_SRPGCR  (MXC_SRPG_EMPGC1_BASE + 0x0)
+#define MXC_SRPG_EMPGC1_PUPSCR  (MXC_SRPG_EMPGC1_BASE + 0x4)
+#define MXC_SRPG_EMPGC1_PDNSCR  (MXC_SRPG_EMPGC1_BASE + 0x8)
+
+#define MXC_SRPG_MEGAMIX_SRPGCR         (MXC_SRPG_MEGAMIX_BASE + 0x0)
+#define MXC_SRPG_MEGAMIX_PUPSCR         (MXC_SRPG_MEGAMIX_BASE + 0x4)
+#define MXC_SRPG_MEGAMIX_PDNSCR         (MXC_SRPG_MEGAMIX_BASE + 0x8)
+
+#define MXC_SRPGC_EMI_SRPGCR    (MXC_SRPGC_EMI_BASE + 0x0)
+#define MXC_SRPGC_EMI_PUPSCR    (MXC_SRPGC_EMI_BASE + 0x4)
+#define MXC_SRPGC_EMI_PDNSCR    (MXC_SRPGC_EMI_BASE + 0x8)
+
+#endif                          /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
new file mode 100644
index 00000000000..d6fd3961ade
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+        {
+                .start = MX51_UART1_BASE_ADDR,
+                .end = MX51_UART1_BASE_ADDR + 0xfff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MX51_MXC_INT_UART1,
+                .end = MX51_MXC_INT_UART1,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device0 = {
+        .name = "imx-uart",
+        .id = 0,
+        .resource = uart0,
+        .num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+        {
+                .start = MX51_UART2_BASE_ADDR,
+                .end = MX51_UART2_BASE_ADDR + 0xfff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MX51_MXC_INT_UART2,
+                .end = MX51_MXC_INT_UART2,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device1 = {
+        .name = "imx-uart",
+        .id = 1,
+        .resource = uart1,
+        .num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+        {
+                .start = MX51_UART3_BASE_ADDR,
+                .end = MX51_UART3_BASE_ADDR + 0xfff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = MX51_MXC_INT_UART3,
+                .end = MX51_MXC_INT_UART3,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_uart_device2 = {
+        .name = "imx-uart",
+        .id = 2,
+        .resource = uart2,
+        .num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource mxc_fec_resources[] = {
+        {
+                .start  = MX51_MXC_FEC_BASE_ADDR,
+                .end    = MX51_MXC_FEC_BASE_ADDR + 0xfff,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = MX51_MXC_INT_FEC,
+                .end    = MX51_MXC_INT_FEC,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+struct platform_device mxc_fec_device = {
+        .name = "fec",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(mxc_fec_resources),
+        .resource = mxc_fec_resources,
+};
+
+/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
+int __init mxc_register_gpios(void)
+{
+        return 0;
+}
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
new file mode 100644
index 00000000000..f339ab8c19b
--- /dev/null
+++ b/arch/arm/mach-mx5/devices.h
@@ -0,0 +1,4 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_fec_device;
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
new file mode 100644
index 00000000000..c21e18be7af
--- /dev/null
+++ b/arch/arm/mach-mx5/mm.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX51 memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+        {
+                .virtual = MX51_IRAM_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
+                .length = MX51_IRAM_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_DEBUG_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
+                .length = MX51_DEBUG_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_TZIC_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
+                .length = MX51_TZIC_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_AIPS1_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
+                .length = MX51_AIPS1_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_SPBA0_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
+                .length = MX51_SPBA0_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_AIPS2_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
+                .length = MX51_AIPS2_SIZE,
+                .type = MT_DEVICE
+        }, {
+                .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
+                .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
+                .length = MX51_NFC_AXI_SIZE,
+                .type = MT_DEVICE
+        },
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx51_map_io(void)
+{
+        u32 tzic_addr;
+
+        if (mx51_revision() < MX51_CHIP_REV_2_0)
+                tzic_addr = 0x8FFFC000;
+        else
+                tzic_addr = 0xE0003000;
+        mxc_io_desc[2].pfn =  __phys_to_pfn(tzic_addr);
+
+        mxc_set_cpu_type(MXC_CPU_MX51);
+        mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
+        mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
+        iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx51_init_irq(void)
+{
+        tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 7dbe4ca12ef..69816ba8293 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -55,7 +55,7 @@ struct sys_timer zn5_timer = {
 MACHINE_START(MAGX_ZN5, "Motorola Zn5")
         .phys_io        = MXC91231_AIPS1_BASE_ADDR,
         .io_pg_offst    = ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-        .boot_params    = PHYS_OFFSET + 0x100,
+        .boot_params    = MXC91231_PHYS_OFFSET + 0x100,
         .map_io         = mxc91231_map_io,
         .init_irq       = mxc91231_init_irq,
         .timer          = &zn5_timer,
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 2ba9ab95373..04f1d29cba2 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -214,8 +214,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate)
         struct mpu_rate * ptr;
         unsigned long dpll1_rate, ref_rate;
 
-        dpll1_rate = clk_get_rate(ck_dpll1_p);
-        ref_rate = clk_get_rate(ck_ref_p);
+        dpll1_rate = ck_dpll1_p->rate;
+        ref_rate = ck_ref_p->rate;
 
         for (ptr = omap1_rate_table; ptr->rate; ptr++) {
                 if (ptr->xtal != ref_rate)
@@ -306,7 +306,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
         long highest_rate;
         unsigned long ref_rate;
 
-        ref_rate = clk_get_rate(ck_ref_p);
+        ref_rate = ck_ref_p->rate;
 
         highest_rate = -EINVAL;
 
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
index c6031d74d6f..74930e3158e 100644
--- a/arch/arm/mach-omap2/clock34xx_data.c
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -671,7 +671,6 @@ static struct clk dpll4_m3x2_ck = {
         .name           = "dpll4_m3x2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll4_m3_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
         .enable_bit     = OMAP3430_PWRDN_TV_SHIFT,
         .flags          = INVERT_ENABLE,
@@ -811,7 +810,6 @@ static struct clk dpll4_m6x2_ck = {
         .name           = "dpll4_m6x2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll4_m6_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
         .enable_bit     = OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
         .flags          = INVERT_ENABLE,
@@ -1047,7 +1045,6 @@ static struct clk iva2_ck = {
         .name           = "iva2_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &dpll2_m2_ck,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
         .enable_bit     = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
         .clkdm_name     = "iva2_clkdm",
@@ -1121,7 +1118,6 @@ static struct clk gfx_l3_ck = {
         .name           = "gfx_l3_ck",
         .ops            = &clkops_omap2_dflt_wait,
         .parent         = &l3_ick,
-        .init           = &omap2_init_clksel_parent,
         .enable_reg     = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
         .enable_bit     = OMAP_EN_GFX_SHIFT,
         .recalc         = &followparent_recalc,
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 2210e227d78..9d882bcb56e 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -346,37 +346,37 @@ static struct clk aess_fclk = {
 };
 
 static const struct clksel_rate div31_1to31_rates[] = {
-        { .div = 1, .val = 0, .flags = RATE_IN_4430 },
-        { .div = 2, .val = 1, .flags = RATE_IN_4430 },
-        { .div = 3, .val = 2, .flags = RATE_IN_4430 },
-        { .div = 4, .val = 3, .flags = RATE_IN_4430 },
-        { .div = 5, .val = 4, .flags = RATE_IN_4430 },
-        { .div = 6, .val = 5, .flags = RATE_IN_4430 },
-        { .div = 7, .val = 6, .flags = RATE_IN_4430 },
-        { .div = 8, .val = 7, .flags = RATE_IN_4430 },
-        { .div = 9, .val = 8, .flags = RATE_IN_4430 },
-        { .div = 10, .val = 9, .flags = RATE_IN_4430 },
-        { .div = 11, .val = 10, .flags = RATE_IN_4430 },
-        { .div = 12, .val = 11, .flags = RATE_IN_4430 },
-        { .div = 13, .val = 12, .flags = RATE_IN_4430 },
-        { .div = 14, .val = 13, .flags = RATE_IN_4430 },
-        { .div = 15, .val = 14, .flags = RATE_IN_4430 },
-        { .div = 16, .val = 15, .flags = RATE_IN_4430 },
-        { .div = 17, .val = 16, .flags = RATE_IN_4430 },
-        { .div = 18, .val = 17, .flags = RATE_IN_4430 },
-        { .div = 19, .val = 18, .flags = RATE_IN_4430 },
-        { .div = 20, .val = 19, .flags = RATE_IN_4430 },
-        { .div = 21, .val = 20, .flags = RATE_IN_4430 },
-        { .div = 22, .val = 21, .flags = RATE_IN_4430 },
-        { .div = 23, .val = 22, .flags = RATE_IN_4430 },
-        { .div = 24, .val = 23, .flags = RATE_IN_4430 },
-        { .div = 25, .val = 24, .flags = RATE_IN_4430 },
-        { .div = 26, .val = 25, .flags = RATE_IN_4430 },
-        { .div = 27, .val = 26, .flags = RATE_IN_4430 },
-        { .div = 28, .val = 27, .flags = RATE_IN_4430 },
-        { .div = 29, .val = 28, .flags = RATE_IN_4430 },
-        { .div = 30, .val = 29, .flags = RATE_IN_4430 },
-        { .div = 31, .val = 30, .flags = RATE_IN_4430 },
+        { .div = 1, .val = 1, .flags = RATE_IN_4430 },
+        { .div = 2, .val = 2, .flags = RATE_IN_4430 },
+        { .div = 3, .val = 3, .flags = RATE_IN_4430 },
+        { .div = 4, .val = 4, .flags = RATE_IN_4430 },
+        { .div = 5, .val = 5, .flags = RATE_IN_4430 },
+        { .div = 6, .val = 6, .flags = RATE_IN_4430 },
+        { .div = 7, .val = 7, .flags = RATE_IN_4430 },
+        { .div = 8, .val = 8, .flags = RATE_IN_4430 },
+        { .div = 9, .val = 9, .flags = RATE_IN_4430 },
+        { .div = 10, .val = 10, .flags = RATE_IN_4430 },
+        { .div = 11, .val = 11, .flags = RATE_IN_4430 },
+        { .div = 12, .val = 12, .flags = RATE_IN_4430 },
+        { .div = 13, .val = 13, .flags = RATE_IN_4430 },
+        { .div = 14, .val = 14, .flags = RATE_IN_4430 },
+        { .div = 15, .val = 15, .flags = RATE_IN_4430 },
+        { .div = 16, .val = 16, .flags = RATE_IN_4430 },
+        { .div = 17, .val = 17, .flags = RATE_IN_4430 },
+        { .div = 18, .val = 18, .flags = RATE_IN_4430 },
+        { .div = 19, .val = 19, .flags = RATE_IN_4430 },
+        { .div = 20, .val = 20, .flags = RATE_IN_4430 },
+        { .div = 21, .val = 21, .flags = RATE_IN_4430 },
+        { .div = 22, .val = 22, .flags = RATE_IN_4430 },
+        { .div = 23, .val = 23, .flags = RATE_IN_4430 },
+        { .div = 24, .val = 24, .flags = RATE_IN_4430 },
+        { .div = 25, .val = 25, .flags = RATE_IN_4430 },
+        { .div = 26, .val = 26, .flags = RATE_IN_4430 },
+        { .div = 27, .val = 27, .flags = RATE_IN_4430 },
+        { .div = 28, .val = 28, .flags = RATE_IN_4430 },
+        { .div = 29, .val = 29, .flags = RATE_IN_4430 },
+        { .div = 30, .val = 30, .flags = RATE_IN_4430 },
+        { .div = 31, .val = 31, .flags = RATE_IN_4430 },
         { .div = 0 },
 };
 
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index a26d6a08ae3..12f0cbfc289 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -137,7 +137,7 @@ return_sleep_time:
         local_irq_enable();
         local_fiq_enable();
 
-        return (u32)timespec_to_ns(&ts_idle)/1000;
+        return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index bd8cb597472..7027cdc1ba4 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
         u32 l;
-        char *ck;
+        char *ck = NULL;
 
         if (cpu_is_omap24xx()) {
                 ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
                 l = OMAP44XX_GPMC_BASE;
         }
 
+        if (WARN_ON(!ck))
+                return;
+
         gpmc_l3_clk = clk_get(NULL, ck);
         if (IS_ERR(gpmc_l3_clk)) {
                 printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@@ -534,6 +537,8 @@ void __init gpmc_init(void)
                 BUG();
         }
 
+        clk_enable(gpmc_l3_clk);
+
         l = gpmc_read_reg(GPMC_REVISION);
         printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
         /* Set smart idle mode and automatic L3 clock gating */
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a091b53657b..3d65c50bd01 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -188,6 +188,8 @@ void __init omap3_check_revision(void)
         u16 hawkeye;
         u8 rev;
 
+        omap_chip.oc = CHIP_IS_OMAP3430;
+
         /*
          * We cannot access revision registers on ES1.0.
          * If the processor type is Cortex-A8 and the revision is 0x0
@@ -196,6 +198,7 @@ void __init omap3_check_revision(void)
         cpuid = read_cpuid(CPUID_ID);
         if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
                 omap_revision = OMAP3430_REV_ES1_0;
+                omap_chip.oc |= CHIP_IS_OMAP3430ES1;
                 return;
         }
 
@@ -216,18 +219,28 @@ void __init omap3_check_revision(void)
                 case 0: /* Take care of early samples */
                 case 1:
                         omap_revision = OMAP3430_REV_ES2_0;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
                         break;
                 case 2:
                         omap_revision = OMAP3430_REV_ES2_1;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
                         break;
                 case 3:
                         omap_revision = OMAP3430_REV_ES3_0;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
                         break;
                 case 4:
+                        omap_revision = OMAP3430_REV_ES3_1;
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+                        break;
+                case 7:
                 /* FALLTHROUGH */
                 default:
                         /* Use the latest known revision as default */
-                        omap_revision = OMAP3430_REV_ES3_1;
+                        omap_revision = OMAP3430_REV_ES3_1_2;
+
+                        /* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
                 }
                 break;
         case 0xb868:
@@ -235,14 +248,18 @@ void __init omap3_check_revision(void)
                  *
                  * Set the device to be OMAP3505 here. Actual device
                  * is identified later based on the features.
+                 *
+                 * REVISIT: AM3505/AM3517 should have their own CHIP_IS
                  */
                 omap_revision = OMAP3505_REV(rev);
+                omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
                 break;
         case 0xb891:
         /* FALLTHROUGH */
         default:
                 /* Unknown default to latest silicon rev as default*/
                 omap_revision = OMAP3630_REV_ES1_0;
+                omap_chip.oc |= CHIP_IS_OMAP3630ES1;
         }
 }
 
@@ -360,6 +377,7 @@ void __init omap2_check_revision(void)
                 omap3_check_revision();
                 omap3_check_features();
                 omap3_cpuinfo();
+                return;
         } else if (cpu_is_omap44xx()) {
                 omap4_check_revision();
                 return;
@@ -374,27 +392,14 @@ void __init omap2_check_revision(void)
         if (cpu_is_omap243x()) {
                 /* Currently only supports 2430ES2.1 and 2430-all */
                 omap_chip.oc |= CHIP_IS_OMAP2430;
+                return;
         } else if (cpu_is_omap242x()) {
                 /* Currently only supports 2420ES2.1.1 and 2420-all */
                 omap_chip.oc |= CHIP_IS_OMAP2420;
-        } else if (cpu_is_omap3505() || cpu_is_omap3517()) {
-                omap_chip.oc = CHIP_IS_OMAP3430 | CHIP_IS_OMAP3430ES3_1;
-        } else if (cpu_is_omap343x()) {
-                omap_chip.oc = CHIP_IS_OMAP3430;
-                if (omap_rev() == OMAP3430_REV_ES1_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-                else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
-                         omap_rev() <= OMAP3430_REV_ES2_1)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-                else if (omap_rev() == OMAP3430_REV_ES3_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
-                else if (omap_rev() == OMAP3430_REV_ES3_1)
-                        omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
-                else if (omap_rev() == OMAP3630_REV_ES1_0)
-                        omap_chip.oc |= CHIP_IS_OMAP3630ES1;
-        } else {
-                pr_err("Uninitialized omap_chip, please fix!\n");
+                return;
         }
+
+        pr_err("Uninitialized omap_chip, please fix!\n");
 }
 
 /*
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index e9bc782fa41..26aeef560aa 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
         int i;
 
         for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-                unsigned long base;
+                unsigned long base = 0;
                 struct omap_irq_bank *bank = irq_banks + i;
 
                 if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
                 else if (cpu_is_omap34xx())
                         base = OMAP34XX_IC_BASE;
 
+                BUG_ON(!base);
+
                 /* Static mapping, never released */
                 bank->base_reg = ioremap(base, SZ_4K);
                 if (!bank->base_reg) {
@@ -274,4 +276,22 @@ void omap_intc_restore_context(void)
         }
         /* MIRs are saved and restore with other PRCM registers */
 }
+
+void omap3_intc_suspend(void)
+{
+        /* A pending interrupt would prevent OMAP from entering suspend */
+        omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+        /* Disable autoidle as it can stall interrupt controller */
+        intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+        /* Re-enable autoidle */
+        intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
 #endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 0c3c72d934b..8afe9dd3f15 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 {
         struct twl4030_hsmmc_info *c;
         int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+        int i;
 
         if (cpu_is_omap2430()) {
                 control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
                 mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
                 if (!mmc) {
                         pr_err("Cannot allocate memory for mmc device!\n");
-                        return;
+                        goto done;
                 }
 
                 if (c->name)
@@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
                         continue;
                 c->dev = mmc->dev;
         }
+
+done:
+        for (i = 0; i < nr_hsmmc; i++)
+                kfree(hsmmc_data[i]);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 459ef23ab8a..5fedc50c58e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -51,7 +51,7 @@ struct omap_mux_entry {
 static unsigned long mux_phys;
 static void __iomem *mux_base;
 
-static inline u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(u16 reg)
 {
         if (cpu_is_omap24xx())
                 return __raw_readb(mux_base + reg);
@@ -59,7 +59,7 @@ static inline u16 omap_mux_read(u16 reg)
                 return __raw_readw(mux_base + reg);
 }
 
-static inline void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(u16 val, u16 reg)
 {
         if (cpu_is_omap24xx())
                 __raw_writeb(val, mux_base + reg);
@@ -67,6 +67,14 @@ static inline void omap_mux_write(u16 val, u16 reg)
                 __raw_writew(val, mux_base + reg);
 }
 
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+        while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+                omap_mux_write(board_mux->value, board_mux->reg_offset);
+                board_mux++;
+        }
+}
+
 #if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
@@ -478,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
         char *flags[OMAP_MUX_MAX_NR_FLAGS];
-        char mode[14];
+        char mode[sizeof("OMAP_MUX_MODE") + 1];
         int i = -1;
 
         sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -545,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
                 if (!m0_name)
                         continue;
 
+                /* REVISIT: Needs to be updated if mode0 names get longer */
                 for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
                         if (m0_name[i] == '\0') {
                                 m0_def[i] = m0_name[i];
@@ -833,14 +842,6 @@ static void __init omap_mux_set_cmdline_signals(void)
         kfree(options);
 }
 
-static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux)
-{
-        while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-                omap_mux_write(board_mux->value, board_mux->reg_offset);
-                board_mux++;
-        }
-}
-
 static int __init omap_mux_copy_names(struct omap_mux *src,
                                         struct omap_mux *dst)
 {
@@ -968,6 +969,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
                 }
 #endif
 
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
+                if (!superset->muxnames || !superset->muxnames[0]) {
+                        superset++;
+                        continue;
+                }
+#endif
+
                 entry = omap_mux_list_add(superset);
                 if (!entry) {
                         printk(KERN_ERR "mux: Could not add entry\n");
@@ -998,12 +1006,15 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
                 omap_mux_package_fixup(package_subset, superset);
         if (package_balls)
                 omap_mux_package_init_balls(package_balls, superset);
-        omap_mux_set_cmdline_signals();
-        omap_mux_set_board_signals(board_mux);
 #endif
 
         omap_mux_init_list(superset);
 
+#ifdef CONFIG_OMAP_MUX
+        omap_mux_set_cmdline_signals();
+        omap_mux_write_array(board_mux);
+#endif
+
         return 0;
 }
 
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index d8b4d5ad227..f8c2e7a8f06 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -147,6 +147,30 @@ u16 omap_mux_get_gpio(int gpio);
 void omap_mux_set_gpio(u16 val, int gpio);
 
 /**
+ * omap_mux_read() - read mux register
+ * @mux_offset:         Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:                New mux register value
+ * @mux_offset:         Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:          Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
+/**
  * omap3_mux_init() - initialize mux system with board specific set
  * @board_mux:          Board specific mux table
  * @flags:              OMAP package type used for the board
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 68e0a595f9a..07aa7b3c95f 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
         _OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
                 "uart3_tx_irtx", NULL, NULL, NULL,
                 "gpio_166", NULL, NULL, "safe_mode"),
+
+        /* Only on 3630, see omap36xx_cbp_subset for the signals */
+        _OMAP3_MUXENTRY(GPMC_A11, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(GPMC_A11, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
+        _OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+                NULL, NULL, NULL, NULL,
+                NULL, NULL, NULL, NULL),
         { .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d8c8545875b..478ae585ca3 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -94,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
 
         oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
 
-        oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+        if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+                oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 860b755d222..a0866268aa4 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -54,8 +54,6 @@ int omap2_pm_debug;
         regs[reg_count++].val = \
                          __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
-static int __init pm_dbg_init(void);
-
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
         struct reg {
@@ -167,6 +165,8 @@ struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
+static int __init pm_dbg_init(void);
+
 enum {
         DEBUG_FILE_COUNTERS = 0,
         DEBUG_FILE_TIMERS,
@@ -488,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-        *val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+        int ret;
+        ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+        *val = ret;
 
-        if (*val >= 0)
+        if (ret >= 0)
                 return 0;
         return *val;
 }
@@ -604,6 +606,4 @@ static int __init pm_dbg_init(void)
 }
 arch_initcall(pm_dbg_init);
 
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
 #endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0bf345db714..7a9c2d00451 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -32,12 +32,16 @@ extern struct omap_dm_timer *gptimer_wakeup;
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)         do {} while (0);
+#define omap2_pm_debug                          0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
 extern int pm_dbg_regset_init(int reg_set);
 #else
-#define omap2_pm_dump(mode, resume, us)         do {} while (0);
-#define omap2_pm_debug                          0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #define pm_dbg_regset_save(reg_set) do {} while (0);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c6cc809afb7..910a7acf542 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -26,6 +26,7 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
@@ -126,7 +127,15 @@ static void omap3_core_save_context(void)
         /* wait for the save to complete */
         while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
                         & PADCONF_SAVE_DONE))
-                ;
+                udelay(1);
+
+        /*
+         * Force write last pad into memory, as this can fail in some
+         * cases according to erratas 1.157, 1.185
+         */
+        omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+                OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
         /* Save the Interrupt controller context */
         omap_intc_save_context();
         /* Save the GPMC context */
@@ -392,6 +401,7 @@ void omap_sram_idle(void)
                 prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
                 omap3_enable_io_chain();
         }
+        omap3_intc_prepare_idle();
 
         /*
         * On EMU/HS devices ROM code restores a SRDC value
@@ -438,6 +448,7 @@ void omap_sram_idle(void)
                                                OMAP3430_GR_MOD,
                                                OMAP3_PRM_VOLTCTRL_OFFSET);
         }
+        omap3_intc_resume_idle();
 
         /* PER */
         if (per_next_state < PWRDM_POWER_ON) {
@@ -578,6 +589,8 @@ static int omap3_pm_suspend(void)
         }
 
         omap_uart_prepare_suspend();
+        omap3_intc_suspend();
+
         omap_sram_idle();
 
 restore:
@@ -835,6 +848,8 @@ static void __init prcm_setup_regs(void)
                         CM_AUTOIDLE);
         }
 
+        omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
         /*
          * Set all plls to autoidle. This is needed until autoidle is
          * enabled by clockfw
@@ -875,15 +890,23 @@ static void __init prcm_setup_regs(void)
         prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
                           OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+        /* Enable PM_WKEN to support DSS LPR */
+        prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+                                OMAP3430_DSS_MOD, PM_WKEN);
+
         /* Enable wakeups in PER */
         prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
                           OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+                          OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+                          OMAP3430_EN_MCBSP4,
                           OMAP3430_PER_MOD, PM_WKEN);
         /* and allow them to wake up MPU */
         prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
                           OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+                          OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+                          OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+                          OMAP3430_EN_MCBSP4,
                           OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
         /* Don't attach IVA interrupts */
@@ -904,24 +927,6 @@ static void __init prcm_setup_regs(void)
         /* Clear any pending PRCM interrupts */
         prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-        /* Don't attach IVA interrupts */
-        prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-        prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-        prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-        prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-
-        /* Clear any pending 'reset' flags */
-        prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-        prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
-
-        /* Clear any pending PRCM interrupts */
-        prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
-
         omap3_iva_idle();
         omap3_d2d_idle();
 }
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 3ea8177ffb2..cf466ea1dff 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -44,7 +44,6 @@ struct omap3_prcm_regs {
         u32 iva2_cm_clksel2;
         u32 cm_sysconfig;
         u32 sgx_cm_clksel;
-        u32 wkup_cm_clksel;
         u32 dss_cm_clksel;
         u32 cam_cm_clksel;
         u32 per_cm_clksel;
@@ -53,7 +52,6 @@ struct omap3_prcm_regs {
         u32 pll_cm_autoidle2;
         u32 pll_cm_clksel4;
         u32 pll_cm_clksel5;
-        u32 pll_cm_clken;
         u32 pll_cm_clken2;
         u32 cm_polctrl;
         u32 iva2_cm_fclken;
@@ -77,7 +75,6 @@ struct omap3_prcm_regs {
         u32 usbhost_cm_iclken;
         u32 iva2_cm_autiidle2;
         u32 mpu_cm_autoidle2;
-        u32 pll_cm_autoidle;
         u32 iva2_cm_clkstctrl;
         u32 mpu_cm_clkstctrl;
         u32 core_cm_clkstctrl;
@@ -274,7 +271,6 @@ void omap3_prcm_save_context(void)
         prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
         prcm_context.sgx_cm_clksel =
                          cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-        prcm_context.wkup_cm_clksel = cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
         prcm_context.dss_cm_clksel =
                          cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
         prcm_context.cam_cm_clksel =
@@ -291,8 +287,6 @@ void omap3_prcm_save_context(void)
                         cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
         prcm_context.pll_cm_clksel5 =
                          cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-        prcm_context.pll_cm_clken =
-                        cm_read_mod_reg(PLL_MOD, CM_CLKEN);
         prcm_context.pll_cm_clken2 =
                         cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
         prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
@@ -338,8 +332,6 @@ void omap3_prcm_save_context(void)
                          cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
         prcm_context.mpu_cm_autoidle2 =
                          cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-        prcm_context.pll_cm_autoidle =
-                         cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
         prcm_context.iva2_cm_clkstctrl =
                          cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
         prcm_context.mpu_cm_clkstctrl =
@@ -431,7 +423,6 @@ void omap3_prcm_restore_context(void)
         __raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
         cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
                                          CM_CLKSEL);
-        cm_write_mod_reg(prcm_context.wkup_cm_clksel, WKUP_MOD, CM_CLKSEL);
         cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
                                          CM_CLKSEL);
         cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
@@ -448,7 +439,6 @@ void omap3_prcm_restore_context(void)
                                         OMAP3430ES2_CM_CLKSEL4);
         cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
                                          OMAP3430ES2_CM_CLKSEL5);
-        cm_write_mod_reg(prcm_context.pll_cm_clken, PLL_MOD, CM_CLKEN);
         cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
                                         OMAP3430ES2_CM_CLKEN2);
         __raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
@@ -487,7 +477,6 @@ void omap3_prcm_restore_context(void)
         cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
                                         CM_AUTOIDLE2);
         cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
-        cm_write_mod_reg(prcm_context.pll_cm_autoidle, PLL_MOD, CM_AUTOIDLE);
         cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
                                         CM_CLKSTCTRL);
         cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ea050ce188a..40f00628516 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -24,6 +24,8 @@
                 OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
 #define OMAP44XX_PRM_REGADDR(module, reg)                               \
                 OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg)                          \
+                OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
 
 #include "prm44xx.h"
 
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 89be97f0589..adb2558bb12 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -386,26 +386,26 @@
 
 
 /* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
-#define OMAP4430_REVISION_PRCM                          OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+#define OMAP4430_REVISION_PRCM                          OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
-#define OMAP4430_CHIRON_PRCM_PRM_RSTST                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
 
 /* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
-#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU0_PWRSTST                    OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST                 OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST                    OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST                 OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
 
 /* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
-#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
-#define OMAP4430_PM_PDA_CPU1_PWRSTST                    OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
-#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
-#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST                 OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
-#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL               OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
-#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL                  OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST                    OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST                 OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL               OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL                  OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
 #endif
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964bec815..e10a02df6e1 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -36,7 +36,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV     0x52
 #define UART_OMAP_WER           0x17    /* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
         int num;
@@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
         uart->timeout = DEFAULT_TIMEOUT;
         setup_timer(&uart->timer, omap_uart_idle_timer,
                     (unsigned long) uart);
-        mod_timer(&uart->timer, jiffies + uart->timeout);
+        if (uart->timeout)
+                mod_timer(&uart->timer, jiffies + uart->timeout);
         omap_uart_smart_idle_enable(uart, 0);
 
         if (cpu_is_omap34xx()) {
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 15268f8b61d..c3626ea4814 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -245,7 +245,8 @@ restore:
         mov     r1, #0          @ set task id for ROM code in r1
         mov     r2, #4          @ set some flags in r2, r6
         mov     r6, #0xff
-        adr     r3, write_aux_control_params    @ r3 points to parameters
+        ldr     r4, scratchpad_base
+        ldr     r3, [r4, #0xBC] @ r3 points to parameters
         mcr     p15, 0, r0, c7, c10, 4  @ data write barrier
         mcr     p15, 0, r0, c7, c10, 5  @ data memory barrier
         .word   0xE1600071              @ call SMI monitor (smi #1)
@@ -253,14 +254,14 @@ restore:
         b       logic_l1_restore
 l2_inv_api_params:
         .word   0x1, 0x00
-write_aux_control_params:
-        .word   0x1, 0x72
 l2_inv_gp:
         /* Execute smi to invalidate L2 cache */
         mov r12, #0x1                         @ set up to invalide L2
 smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
         /* Write to Aux control register to set some bits */
-        mov     r0, #0x72
+        ldr     r4, scratchpad_base
+        ldr     r3, [r4,#0xBC]
+        ldr     r0, [r3,#4]
         mov     r12, #0x3
         .word 0xE1600070        @ Call SMI monitor (smieq)
 logic_l1_restore:
@@ -271,6 +272,7 @@ logic_l1_restore:
 
         ldr     r4, scratchpad_base
         ldr     r3, [r4,#0xBC]
+        adds    r3, r3, #8
         ldmia   r3!, {r4-r6}
         mov     sp, r4
         msr     spsr_cxsf, r5
@@ -387,6 +389,9 @@ usettbr0:
 save_context_wfi:
         /*b     save_context_wfi*/      @ enable to debug save code
         mov     r8, r0 /* Store SDRAM address in r8 */
+        mrc     p15, 0, r5, c1, c0, 1   @ Read Auxiliary Control Register
+        mov     r4, #0x1                @ Number of parameters for restore call
+        stmia   r8!, {r4-r5}
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c3d513cad5a..905719a677a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -57,6 +57,13 @@ config MACH_LINKSTATION_MINI
           Say 'Y' here if you want your kernel to support the
           Buffalo Linkstation Mini platform.
 
+config MACH_LINKSTATION_LS_HGL
+        bool "Buffalo Linkstation LS-HGL"
+        select I2C_BOARDINFO
+        help
+          Say 'Y' here if you want your kernel to support the
+          Buffalo Linkstation LS-HGL platform.
+
 config MACH_TS409
         bool "QNAP TS-409"
         help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 89772fcd65c..eb6eabcb41e 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
 obj-$(CONFIG_MACH_TERASTATION_PRO2)     += terastation_pro2-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_LINKSTATION_MINI) += lsmini-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
 obj-$(CONFIG_MACH_DNS323)       += dns323-setup.o
 obj-$(CONFIG_MACH_TS209)        += ts209-setup.o tsx09-common.o
 obj-$(CONFIG_MACH_TS409)        += ts409-setup.o tsx09-common.o
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index f87fa125380..8dc2c76d226 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -488,7 +488,7 @@ static struct platform_device orion5x_xor0_channel = {
         .dev            = {
                 .dma_mask               = &orion5x_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&orion5x_xor0_data,
+                .platform_data          = &orion5x_xor0_data,
         },
 };
 
@@ -514,7 +514,7 @@ static struct platform_device orion5x_xor1_channel = {
         .dev            = {
                 .dma_mask               = &orion5x_xor_dmamask,
                 .coherent_dma_mask      = DMA_BIT_MASK(64),
-                .platform_data          = (void *)&orion5x_xor1_data,
+                .platform_data          = &orion5x_xor1_data,
         },
 };
 
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 9d4bf763f25..7130904ad99 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -149,10 +149,7 @@ static void __init d2net_sata_power_init(void)
 
 /*
  * The blue front LED is wired to the CPLD and can blink in relation with the
- * SATA activity. This feature is disabled to make this LED compatible with
- * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
- * GPIO's and have to stay in an active state. This is needed to set the blue
- * LED in a "fix on" state regardless of the SATA activity.
+ * SATA activity.
  *
  * The following array detail the different LED registers and the combination
  * of their possible values:
@@ -171,12 +168,11 @@ static void __init d2net_sata_power_init(void)
 #define D2NET_GPIO_RED_LED              6
 #define D2NET_GPIO_BLUE_LED_BLINK_CTRL  16
 #define D2NET_GPIO_BLUE_LED_OFF         23
-#define D2NET_GPIO_SATA0_ACT            14
-#define D2NET_GPIO_SATA1_ACT            15
 
 static struct gpio_led d2net_leds[] = {
         {
-                .name = "d2net:blue:power",
+                .name = "d2net:blue:sata",
+                .default_trigger = "default-on",
                 .gpio = D2NET_GPIO_BLUE_LED_OFF,
                 .active_low = 1,
         },
@@ -201,25 +197,22 @@ static struct platform_device d2net_gpio_leds = {
 
 static void __init d2net_gpio_leds_init(void)
 {
+        int err;
+
         /* Configure GPIO over MPP max number. */
         orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
 
-        if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
-                return;
-        if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
-                goto err_free_1;
-        if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
-                goto err_free_1;
-        if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
-                goto err_free_2;
-        platform_device_register(&d2net_gpio_leds);
-        return;
+        /* Configure register blink_ctrl to allow SATA activity LED blinking. */
+        err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+        if (err == 0) {
+                err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+                if (err)
+                        gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+        }
+        if (err)
+                pr_err("d2net: failed to configure blue LED blink GPIO\n");
 
-err_free_2:
-        gpio_free(D2NET_GPIO_SATA1_ACT);
-err_free_1:
-        gpio_free(D2NET_GPIO_SATA0_ACT);
-        return;
+        platform_device_register(&d2net_gpio_leds);
 }
 
 /****************************************************************************
@@ -289,8 +282,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
         { 11, MPP_UNUSED },
         { 12, MPP_GPIO },       /* SATA 1 power */
         { 13, MPP_UNUSED },
-        { 14, MPP_GPIO },       /* SATA 0 active */
-        { 15, MPP_GPIO },       /* SATA 1 active */
+        { 14, MPP_SATA_LED },   /* SATA 0 active */
+        { 15, MPP_SATA_LED },   /* SATA 1 active */
         { 16, MPP_GPIO },       /* Blue front LED blink control */
         { 17, MPP_UNUSED },
         { 18, MPP_GPIO },       /* Front button (0 = Released, 1 = Pushed ) */
@@ -301,6 +294,8 @@ static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
         /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
 };
 
+#define D2NET_GPIO_INHIBIT_POWER_OFF    24
+
 static void __init d2net_init(void)
 {
         /*
@@ -333,6 +328,8 @@ static void __init d2net_init(void)
 
         i2c_register_board_info(0, d2net_i2c_devices,
                                 ARRAY_SIZE(d2net_i2c_devices));
+
+        orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1);
 }
 
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef36..421b82f7c63 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,7 +33,9 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER     1
 #define DNS323_GPIO_LED_LEFT_AMBER      2
-#define DNS323_GPIO_LED_POWER           5
+#define DNS323_GPIO_SYSTEM_UP           3
+#define DNS323_GPIO_LED_POWER1          4
+#define DNS323_GPIO_LED_POWER2          5
 #define DNS323_GPIO_OVERTEMP            6
 #define DNS323_GPIO_RTC                 7
 #define DNS323_GPIO_POWER_OFF           8
@@ -235,11 +238,31 @@ error_fail:
  * GPIO LEDs (simple - doesn't use hardware blinking support)
  */
 
+#define ORION_BLINK_HALF_PERIOD 100 /* ms */
+
+static int dns323_gpio_blink_set(unsigned gpio,
+        unsigned long *delay_on, unsigned long *delay_off)
+{
+        static int value = 0;
+
+        if (!*delay_on && !*delay_off)
+                *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD;
+
+        if (ORION_BLINK_HALF_PERIOD == *delay_on
+            && ORION_BLINK_HALF_PERIOD == *delay_off) {
+                value = !value;
+                orion_gpio_set_blink(gpio, value);
+                return 0;
+        }
+
+        return -EINVAL;
+}
+
 static struct gpio_led dns323_leds[] = {
         {
                 .name = "power:blue",
-                .gpio = DNS323_GPIO_LED_POWER,
-                .active_low = 1,
+                .gpio = DNS323_GPIO_LED_POWER2,
+                .default_trigger = "timer",
         }, {
                 .name = "right:amber",
                 .gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -254,6 +277,7 @@ static struct gpio_led dns323_leds[] = {
 static struct gpio_led_platform_data dns323_led_data = {
         .num_leds       = ARRAY_SIZE(dns323_leds),
         .leds           = dns323_leds,
+        .gpio_blink_set = dns323_gpio_blink_set,
 };
 
 static struct platform_device dns323_gpio_leds = {
@@ -334,7 +358,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
         {  0, MPP_UNUSED },
         {  1, MPP_GPIO },               /* right amber LED (sata ch0) */
         {  2, MPP_GPIO },               /* left amber LED (sata ch1) */
-        {  3, MPP_UNUSED },
+        {  3, MPP_GPIO },               /* system up flag */
         {  4, MPP_GPIO },               /* power button LED */
         {  5, MPP_GPIO },               /* power button LED */
         {  6, MPP_GPIO },               /* GMT G751-2f overtemp */
@@ -372,13 +396,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
         },
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
         pr_info("%s: triggering power-off...\n", __func__);
         gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+        pr_info("%s: triggering power-off...\n", __func__);
+        /* Pin has to be changed to 1 and back to 0 to do actual power off. */
+        gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+        mdelay(100);
+        gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
         /* Setup basic Orion functions. Need to be called early. */
@@ -400,6 +434,14 @@ static void __init dns323_init(void)
         orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
         platform_device_register(&dns323_nor_flash);
 
+        /* The 5181 power LED is active low and requires
+         * DNS323_GPIO_LED_POWER1 to also be low.
+         */
+        if (dns323_dev_id() == MV88F5181_DEV_ID) {
+                dns323_leds[0].active_low = 1;
+                gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+        }
+
         platform_device_register(&dns323_gpio_leds);
 
         platform_device_register(&dns323_button_device);
@@ -424,11 +466,20 @@ static void __init dns323_init(void)
         if (dns323_dev_id() == MV88F5182_DEV_ID)
                 orion5x_sata_init(&dns323_sata_data);
 
-        /* register dns323 specific power-off method */
+        /* The 5182 has flag to indicate the system is up. Without this flag
+         * set, power LED will flash and cannot be controlled via leds-gpio.
+         */
+        if (dns323_dev_id() == MV88F5182_DEV_ID)
+                gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+        /* Register dns323 specific power-off method */
         if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
             gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
                 pr_err("DNS323: failed to setup power-off GPIO\n");
-        pm_power_off = dns323_power_off;
+        if (dns323_dev_id() == MV88F5182_DEV_ID)
+                pm_power_off = dns323b_power_off;
+        else
+                pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 00000000000..8e569be6e2c
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE    0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE    SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+        .width          = 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+        .flags  = IORESOURCE_MEM,
+        .start  = LS_HGL_NOR_BOOT_BASE,
+        .end    = LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = 0,
+        .dev            = {
+                .platform_data  = &ls_hgl_nor_flash_data,
+        },
+        .num_resources          = 1,
+        .resource               = &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+        .phy_addr       = 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+        I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+        {
+                .name      = "alarm:red",
+                .gpio      = LS_HGL_GPIO_LED_ALARM,
+                .active_low     = 1,
+        }, {
+                .name      = "info:amber",
+                .gpio      = LS_HGL_GPIO_LED_INFO,
+                .active_low     = 1,
+        }, {
+                .name      = "func:blue:top",
+                .gpio      = LS_HGL_GPIO_LED_FUNC,
+                .active_low     = 1,
+        }, {
+                .name      = "power:blue:bottom",
+                .gpio      = LS_HGL_GPIO_LED_PWR,
+        },
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+        .leds      = ls_hgl_led_pins,
+        .num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &ls_hgl_led_data,
+        },
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+        {
+                .code      = KEY_OPTION,
+                .gpio      = LS_HGL_GPIO_KEY_FUNC,
+                .desc      = "Function Button",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LS_HGL_SW_POWER,
+                .gpio      = LS_HGL_GPIO_KEY_POWER,
+                .desc      = "Power-on Switch",
+                .active_low     = 1,
+        }, {
+                .type           = EV_SW,
+                .code      = LS_HGL_SW_AUTOPOWER,
+                .gpio      = LS_HGL_GPIO_KEY_AUTOPOWER,
+                .desc      = "Power-auto Switch",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+        .buttons        = ls_hgl_buttons,
+        .nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+        .name      = "gpio-keys",
+        .id          = -1,
+        .num_resources  = 0,
+        .dev        = {
+                .platform_data  = &ls_hgl_button_data,
+        },
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+        .n_ports        = 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+        arm_machine_restart('h', NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER   9
+#define LS_HGL_GPIO_AUTO_POWER  10
+#define LS_HGL_GPIO_POWER           8
+
+#define LS_HGL_GPIO_HDD_POWER   1
+
+static struct orion5x_mpp_mode ls_hgl_mpp_modes[] __initdata = {
+        {  0, MPP_GPIO }, /* LED_PWR */
+        {  1, MPP_GPIO }, /* HDD_PWR */
+        {  2, MPP_GPIO }, /* LED_ALARM */
+        {  3, MPP_GPIO }, /* LED_INFO */
+        {  4, MPP_UNUSED },
+        {  5, MPP_UNUSED },
+        {  6, MPP_GPIO }, /* FAN_LCK */
+        {  7, MPP_GPIO }, /* INIT */
+        {  8, MPP_GPIO }, /* POWER */
+        {  9, MPP_GPIO }, /* USB_PWR */
+        { 10, MPP_GPIO }, /* AUTO_POWER */
+        { 11, MPP_UNUSED }, /* LED_ETH (dummy) */
+        { 12, MPP_UNUSED },
+        { 13, MPP_UNUSED },
+        { 14, MPP_UNUSED },
+        { 15, MPP_GPIO }, /* FUNC */
+        { 16, MPP_UNUSED },
+        { 17, MPP_GPIO }, /* LED_FUNC */
+        { 18, MPP_UNUSED },
+        { 19, MPP_UNUSED },
+        { -1 },
+};
+
+static void __init ls_hgl_init(void)
+{
+        /*
+         * Setup basic Orion functions. Need to be called early.
+         */
+        orion5x_init();
+
+        orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+        /*
+         * Configure peripherals.
+         */
+        orion5x_ehci0_init();
+        orion5x_ehci1_init();
+        orion5x_eth_init(&ls_hgl_eth_data);
+        orion5x_i2c_init();
+        orion5x_sata_init(&ls_hgl_sata_data);
+        orion5x_uart0_init();
+        orion5x_xor_init();
+
+        orion5x_setup_dev_boot_win(LS_HGL_NOR_BOOT_BASE,
+                                   LS_HGL_NOR_BOOT_SIZE);
+        platform_device_register(&ls_hgl_nor_flash);
+
+        platform_device_register(&ls_hgl_button_device);
+
+        platform_device_register(&ls_hgl_leds);
+
+        i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+        /* enable USB power */
+        gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+        /* register power-off method */
+        pm_power_off = ls_hgl_power_off;
+
+        pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+        /* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+        .phys_io        = ORION5X_REGS_PHYS_BASE,
+        .io_pg_offst    = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+        .boot_params    = 0x00000100,
+        .init_machine   = ls_hgl_init,
+        .map_io         = orion5x_map_io,
+        .init_irq       = orion5x_init_irq,
+        .timer          = &orion5x_timer,
+        .fixup          = tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index c9bf6b81a80..c704f056de1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -11,7 +11,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/leds.h>
@@ -19,12 +18,13 @@
 #include <linux/input.h>
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
-#include <asm/mach-types.h>
 #include <linux/gpio.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
-#include "include/mach/system.h"
 
 /*****************************************************************************
  * Linkstation Mini Info
@@ -186,7 +186,7 @@ static struct mv_sata_platform_data lsmini_sata_data = {
 
 static void lsmini_power_off(void)
 {
-        arch_reset(0, NULL);
+        arm_machine_restart('h', NULL);
 }
 
 
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d5e2e..cb0feca193d 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+        {
+                .name           = "wrt350nv2:green:power",
+                .gpio           = 0,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:security",
+                .gpio           = 1,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:orange:power",
+                .gpio           = 5,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:usb",
+                .gpio           = 6,
+                .active_low     = 1,
+        }, {
+                .name           = "wrt350nv2:green:wireless",
+                .gpio           = 7,
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+        .leds           = wrt350n_v2_led_pins,
+        .num_leds       = ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &wrt350n_v2_led_data,
+        },
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+        {
+                .code           = KEY_RESTART,
+                .gpio           = 3,
+                .desc           = "Reset Button",
+                .active_low     = 1,
+        }, {
+                .code           = KEY_WLAN,
+                .gpio           = 2,
+                .desc           = "WPS Button",
+                .active_low     = 1,
+        },
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+        .buttons        = wrt350n_v2_buttons,
+        .nbuttons       = ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+        .name           = "gpio-keys",
+        .id             = -1,
+        .num_resources  = 0,
+        .dev            = {
+                .platform_data  = &wrt350n_v2_button_data,
+        },
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
         {  0, MPP_GPIO },               /* Power LED green (0=on) */
         {  1, MPP_GPIO },               /* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
         orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
                                    WRT350N_V2_NOR_BOOT_SIZE);
         platform_device_register(&wrt350n_v2_nor_flash);
+        platform_device_register(&wrt350n_v2_leds);
+        platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dee92182749..38fbd0a0e40 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -115,6 +115,11 @@ config MACH_CM_X300
         select CPU_PXA310
         select HAVE_PWM
 
+config MACH_CAPC7117
+        bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
+        select CPU_PXA320
+        select PXA3xx
+
 config ARCH_GUMSTIX
         bool "Gumstix XScale 255 boards"
         select PXA25x
@@ -417,6 +422,24 @@ config MACH_TREO680
           Say Y here if you intend to run this kernel on Palm Treo 680
           smartphone.
 
+config MACH_RAUMFELD_RC
+        bool "Raumfeld Controller"
+        select PXA3xx
+        select CPU_PXA300
+        select HAVE_PWM
+
+config MACH_RAUMFELD_CONNECTOR
+        bool "Raumfeld Connector"
+        select PXA3xx
+        select CPU_PXA300
+        select PXA_SSP
+
+config MACH_RAUMFELD_SPEAKER
+        bool "Raumfeld Speaker"
+        select PXA3xx
+        select CPU_PXA300
+        select PXA_SSP
+
 config PXA_SHARPSL
         bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
         select SHARP_SCOOP
@@ -435,6 +458,7 @@ config SHARPSL_PM
 config CORGI_SSP_DEPRECATED
         bool
         select PXA_SSP
+        select PXA_SSP_LEGACY
         help
           This option will include corgi_ssp.c and corgi_lcd.c
           that corgi_ts.c and other legacy drivers (corgi_bl.c
@@ -446,6 +470,7 @@ config MACH_POODLE
         select PXA25x
         select SHARP_LOCOMO
         select PXA_SSP
+        select PXA_HAVE_BOARD_IRQS
 
 config MACH_CORGI
         bool "Enable Sharp SL-C700 (Corgi) Support"
@@ -492,6 +517,11 @@ config MACH_TOSA
         select PXA25x
         select PXA_HAVE_BOARD_IRQS
 
+config MACH_ICONTROL
+        bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM"
+        select CPU_PXA320
+        select PXA3xx
+
 config ARCH_PXA_ESERIES
         bool "PXA based Toshiba e-series PDAs"
         select PXA25x
@@ -629,6 +659,11 @@ config PXA_SSP
         help
           Enable support for PXA2xx SSP ports
 
+config PXA_SSP_LEGACY
+        bool
+        help
+          Support of legacy SSP API
+
 config TOSA_BT
         tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
         depends on MACH_TOSA
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f64afda7e6f..86bc87b7f2d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
 endif
 obj-$(CONFIG_MACH_EM_X270)      += em-x270.o
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)      += gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)  += am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)  += am300epd.o
@@ -82,6 +83,7 @@ obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)      += corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)       += poodle.o
 obj-$(CONFIG_MACH_TOSA)         += tosa.o
+obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)  += eseries.o
 obj-$(CONFIG_MACH_E330)         += e330.o
 obj-$(CONFIG_MACH_E350)         += e350.o
@@ -89,6 +91,9 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)         += e750.o
 obj-$(CONFIG_MACH_E400)         += e400.o
 obj-$(CONFIG_MACH_E800)         += e800.o
+obj-$(CONFIG_MACH_RAUMFELD_RC)          += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)   += raumfeld.o
+obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)     += raumfeld.o
 
 # Support for blinky lights
 led-y := leds.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index b8cd07ca938..f3b5ace815e 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -132,6 +132,14 @@ static void __init balloon3_init_irq(void)
                 "enabled\n", __func__, BALLOON3_AUX_NIRQ);
 }
 
+static unsigned long balloon3_ac97_pin_config[] = {
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+        GPIO113_AC97_nRESET,
+};
+
 static void balloon3_backlight_power(int on)
 {
         pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
@@ -140,26 +148,7 @@ static void balloon3_backlight_power(int on)
 
 static unsigned long balloon3_lcd_pin_config[] = {
         /* LCD - 16bpp Active TFT */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         GPIO99_GPIO,            /* Backlight */
 };
@@ -311,8 +300,10 @@ static void __init balloon3_init(void)
         pxa_set_stuart_info(NULL);
 
         pxa_set_i2c_info(NULL);
-        if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+        if (balloon3_has(BALLOON3_FEATURE_AUDIO)) {
+                pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config));
                 pxa_set_ac97_info(NULL);
+        }
 
         if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
                 pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
new file mode 100644
index 00000000000..aae544631a8
--- /dev/null
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-pxa/capc7117.c
+ *
+ * Support for the Embedian CAPC-7117 Evaluation Kit
+ * based on the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/serial_8250.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include "generic.h"
+
+/* IDE (PATA) Support */
+static struct pata_platform_info pata_platform_data = {
+        .ioport_shift = 1
+};
+
+static struct resource capc7117_ide_resources[] = {
+        [0] = {
+               .start = 0x11000020,
+               .end = 0x1100003f,
+               .flags = IORESOURCE_MEM
+        },
+        [1] = {
+               .start = 0x1100001c,
+               .end = 0x1100001c,
+               .flags = IORESOURCE_MEM
+        },
+        [2] = {
+               .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+               .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+               .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
+        }
+};
+
+static struct platform_device capc7117_ide_device = {
+        .name = "pata_platform",
+        .num_resources = ARRAY_SIZE(capc7117_ide_resources),
+        .resource = capc7117_ide_resources,
+        .dev = {
+                .platform_data = &pata_platform_data,
+                .coherent_dma_mask = ~0         /* grumble */
+        }
+};
+
+static void __init capc7117_ide_init(void)
+{
+        platform_device_register(&capc7117_ide_device);
+}
+
+/* TI16C752 UART support */
+#define TI16C752_FLAGS          (UPF_BOOT_AUTOCONF | \
+                                        UPF_IOREMAP | \
+                                        UPF_BUGGY_UART | \
+                                        UPF_SKIP_TEST)
+#define TI16C752_UARTCLK        (22118400)
+static struct plat_serial8250_port ti16c752_platform_data[] = {
+        [0] = {
+               .mapbase = 0x14000000,
+               .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+               .irqflags = IRQF_TRIGGER_RISING,
+               .flags = TI16C752_FLAGS,
+               .iotype = UPIO_MEM,
+               .regshift = 1,
+               .uartclk = TI16C752_UARTCLK
+        },
+        [1] = {
+               .mapbase = 0x14000040,
+               .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+               .irqflags = IRQF_TRIGGER_RISING,
+               .flags = TI16C752_FLAGS,
+               .iotype = UPIO_MEM,
+               .regshift = 1,
+               .uartclk = TI16C752_UARTCLK
+        },
+        [2] = {
+               .mapbase = 0x14000080,
+               .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+               .irqflags = IRQF_TRIGGER_RISING,
+               .flags = TI16C752_FLAGS,
+               .iotype = UPIO_MEM,
+               .regshift = 1,
+               .uartclk = TI16C752_UARTCLK
+        },
+        [3] = {
+               .mapbase = 0x140000c0,
+               .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+               .irqflags = IRQF_TRIGGER_RISING,
+               .flags = TI16C752_FLAGS,
+               .iotype = UPIO_MEM,
+               .regshift = 1,
+               .uartclk = TI16C752_UARTCLK
+        },
+        [4] = {
+               /* end of array */
+        }
+};
+
+static struct platform_device ti16c752_device = {
+        .name = "serial8250",
+        .id = PLAT8250_DEV_PLATFORM,
+        .dev = {
+                .platform_data = ti16c752_platform_data
+        }
+};
+
+static void __init capc7117_uarts_init(void)
+{
+        platform_device_register(&ti16c752_device);
+}
+
+static void __init capc7117_init(void)
+{
+        /* Init CoM */
+        mxm_8x10_barebones_init();
+
+        /* Init evaluation board peripherals */
+        mxm_8x10_ac97_init();
+        mxm_8x10_usb_host_init();
+        mxm_8x10_mmc_init();
+
+        capc7117_uarts_init();
+        capc7117_ide_init();
+}
+
+MACHINE_START(CAPC7117,
+              "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
+        .phys_io = 0x40000000,
+        .boot_params = 0xa0000100,
+        .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io = pxa_map_io,
+        .init_irq = pxa3xx_init_irq,
+        .timer = &pxa_timer,
+        .init_machine = capc7117_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 253fd76142d..f1a7703d771 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -50,26 +50,7 @@ static unsigned long cmx255_pin_config[] = {
         GPIO47_STUART_TXD,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* SSP1 */
         GPIO23_SSP1_SCLK,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index eea78b6c2bc..a9926bb7592 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -71,26 +71,7 @@ static unsigned long cmx270_pin_config[] = {
         GPIO111_MMC_DAT_3,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* I2C */
         GPIO117_I2C_SCL,
@@ -195,33 +176,57 @@ static struct resource cmx270_2700G_resource[] = {
         },
 };
 
-static unsigned long save_lcd_regs[10];
+static unsigned long cmx270_marathon_on[] = {
+        GPIO58_GPIO,
+        GPIO59_GPIO,
+        GPIO60_GPIO,
+        GPIO61_GPIO,
+        GPIO62_GPIO,
+        GPIO63_GPIO,
+        GPIO64_GPIO,
+        GPIO65_GPIO,
+        GPIO66_GPIO,
+        GPIO67_GPIO,
+        GPIO68_GPIO,
+        GPIO69_GPIO,
+        GPIO70_GPIO,
+        GPIO71_GPIO,
+        GPIO72_GPIO,
+        GPIO73_GPIO,
+        GPIO74_GPIO,
+        GPIO75_GPIO,
+        GPIO76_GPIO,
+        GPIO77_GPIO,
+};
+
+static unsigned long cmx270_marathon_off[] = {
+        GPIOxx_LCD_TFT_16BPP,
+};
 
 static int cmx270_marathon_probe(struct fb_info *fb)
 {
-        /* save PXA-270 pin settings before enabling 2700G */
-        save_lcd_regs[0] = GPDR1;
-        save_lcd_regs[1] = GPDR2;
-        save_lcd_regs[2] = GAFR1_U;
-        save_lcd_regs[3] = GAFR2_L;
-        save_lcd_regs[4] = GAFR2_U;
-
-        /* Disable PXA-270 on-chip controller driving pins */
-        GPDR1 &= ~(0xfc000000);
-        GPDR2 &= ~(0x00c03fff);
-        GAFR1_U &= ~(0xfff00000);
-        GAFR2_L &= ~(0x0fffffff);
-        GAFR2_U &= ~(0x0000f000);
+        int gpio, err;
+
+        for (gpio = 58; gpio <= 77; gpio++) {
+                err = gpio_request(gpio, "LCD");
+                if (err)
+                        return err;
+                gpio_direction_input(gpio);
+        }
+
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_on));
         return 0;
 }
 
 static int cmx270_marathon_remove(struct fb_info *fb)
 {
-        GPDR1 =   save_lcd_regs[0];
-        GPDR2 =   save_lcd_regs[1];
-        GAFR1_U = save_lcd_regs[2];
-        GAFR2_L = save_lcd_regs[3];
-        GAFR2_U = save_lcd_regs[4];
+        int gpio;
+
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_marathon_off));
+
+        for (gpio = 58; gpio <= 77; gpio++)
+                gpio_free(gpio);
+
         return 0;
 }
 
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 7873fa3d8fa..161fc2d6120 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -59,7 +59,7 @@ void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
         /* clear our parent irq */
-        GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
+        desc->chip->ack(irq);
 
         it8152_irq_demux(irq, desc);
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 74446cf8ae6..da3156d8690 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+        .gpio_vbus              = -1,
         /* no connect GPIO; corgi can't tell connection status */
         .gpio_pullup            = CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 94b23a9e387..d578021d1a1 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -134,6 +134,12 @@ static unsigned long e740_pin_config[] __initdata = {
         /* IrDA */
         GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         /* Audio power control */
         GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
         GPIO40_GPIO,  /* Mic amp power */
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 5eccbce73a3..af83caa52dd 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -132,6 +132,12 @@ static unsigned long e750_pin_config[] __initdata = {
         /* IrDA */
         GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
 
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         /* Audio power control */
         GPIO4_GPIO,  /* Headphone amp power */
         GPIO7_GPIO,  /* Speaker amp power */
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index aad129bed19..8ea97bf53fe 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -35,6 +35,14 @@
 
 /* ------------------------ e800 LCD definitions ------------------------- */
 
+static unsigned long e800_pin_config[] __initdata = {
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+};
+
 static struct w100_gen_regs e800_lcd_regs = {
         .lcd_format =            0x00008003,
         .lcdd_cntl1 =            0x02a00000,
@@ -195,6 +203,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
         pxa_set_ffuart_info(NULL);
         pxa_set_btuart_info(NULL);
         pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index c8a01bc85fd..aab04f33e49 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -109,26 +109,7 @@ static unsigned long common_pin_config[] = {
         GPIO111_MMC_DAT_3,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* QCI */
         GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
new file mode 100644
index 00000000000..771137fc1a8
--- /dev/null
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -0,0 +1,202 @@
+/*
+ * linux/arch/arm/mach-pxa/icontrol.c
+ *
+ * Support for the iControl and SafeTcam platforms from TMT Services
+ * using the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2010-01-21 Hennie van der Merve <hvdmerwe@tmtservies.co.za>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/pxa320.h>
+#include <mach/mxm8x10.h>
+
+#include <linux/spi/spi.h>
+#include <mach/pxa2xx_spi.h>
+#include <linux/can/platform/mcp251x.h>
+
+#include "generic.h"
+
+#define ICONTROL_MCP251x_nCS1   (15)
+#define ICONTROL_MCP251x_nCS2   (16)
+#define ICONTROL_MCP251x_nCS3   (17)
+#define ICONTROL_MCP251x_nCS4   (24)
+
+#define ICONTROL_MCP251x_nIRQ1  (74)
+#define ICONTROL_MCP251x_nIRQ2  (75)
+#define ICONTROL_MCP251x_nIRQ3  (76)
+#define ICONTROL_MCP251x_nIRQ4  (77)
+
+static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
+        .tx_threshold   = 8,
+        .rx_threshold   = 128,
+        .dma_burst_size = 8,
+        .timeout        = 235,
+        .gpio_cs        = ICONTROL_MCP251x_nCS1
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
+        .tx_threshold   = 8,
+        .rx_threshold   = 128,
+        .dma_burst_size = 8,
+        .timeout        = 235,
+        .gpio_cs        = ICONTROL_MCP251x_nCS2
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
+        .tx_threshold   = 8,
+        .rx_threshold   = 128,
+        .dma_burst_size = 8,
+        .timeout        = 235,
+        .gpio_cs        = ICONTROL_MCP251x_nCS3
+};
+
+static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
+        .tx_threshold   = 8,
+        .rx_threshold   = 128,
+        .dma_burst_size = 8,
+        .timeout        = 235,
+        .gpio_cs        = ICONTROL_MCP251x_nCS4
+};
+
+static struct mcp251x_platform_data mcp251x_info = {
+        .oscillator_frequency = 16E6,
+        .model                = CAN_MCP251X_MCP2515,
+        .board_specific_setup = NULL,
+        .power_enable         = NULL,
+        .transceiver_enable   = NULL
+};
+
+static struct spi_board_info mcp251x_board_info[] = {
+        {
+                .modalias        = "mcp251x",
+                .max_speed_hz    = 6500000,
+                .bus_num         = 3,
+                .chip_select     = 0,
+                .platform_data   = &mcp251x_info,
+                .controller_data = &mcp251x_chip_info1,
+                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+        },
+        {
+                .modalias        = "mcp251x",
+                .max_speed_hz    = 6500000,
+                .bus_num         = 3,
+                .chip_select     = 1,
+                .platform_data   = &mcp251x_info,
+                .controller_data = &mcp251x_chip_info2,
+                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+        },
+        {
+                .modalias        = "mcp251x",
+                .max_speed_hz    = 6500000,
+                .bus_num         = 4,
+                .chip_select     = 0,
+                .platform_data   = &mcp251x_info,
+                .controller_data = &mcp251x_chip_info3,
+                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+        },
+        {
+                .modalias        = "mcp251x",
+                .max_speed_hz    = 6500000,
+                .bus_num         = 4,
+                .chip_select     = 1,
+                .platform_data   = &mcp251x_info,
+                .controller_data = &mcp251x_chip_info4,
+                .irq             = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+        }
+};
+
+static struct pxa2xx_spi_master pxa_ssp3_spi_master_info = {
+        .clock_enable   = CKEN_SSP3,
+        .num_chipselect = 2,
+        .enable_dma     = 1
+};
+
+static struct pxa2xx_spi_master pxa_ssp4_spi_master_info = {
+        .clock_enable   = CKEN_SSP4,
+        .num_chipselect = 2,
+        .enable_dma     = 1
+};
+
+struct platform_device pxa_spi_ssp3 = {
+        .name          = "pxa2xx-spi",
+        .id            = 3,
+        .dev           = {
+                .platform_data = &pxa_ssp3_spi_master_info,
+        }
+};
+
+struct platform_device pxa_spi_ssp4 = {
+        .name          = "pxa2xx-spi",
+        .id            = 4,
+        .dev           = {
+                .platform_data = &pxa_ssp4_spi_master_info,
+        }
+};
+
+static struct platform_device *icontrol_spi_devices[] __initdata = {
+        &pxa_spi_ssp3,
+        &pxa_spi_ssp4,
+};
+
+static mfp_cfg_t mfp_can_cfg[] __initdata = {
+        /* CAN CS lines */
+        GPIO15_GPIO,
+        GPIO16_GPIO,
+        GPIO17_GPIO,
+        GPIO24_GPIO,
+
+        /* SPI (SSP3) lines */
+        GPIO89_SSP3_SCLK,
+        GPIO91_SSP3_TXD,
+        GPIO92_SSP3_RXD,
+
+        /* SPI (SSP4) lines */
+        GPIO93_SSP4_SCLK,
+        GPIO95_SSP4_TXD,
+        GPIO96_SSP4_RXD,
+
+        /* CAN nIRQ lines */
+        GPIO74_GPIO | MFP_LPM_EDGE_RISE,
+        GPIO75_GPIO | MFP_LPM_EDGE_RISE,
+        GPIO76_GPIO | MFP_LPM_EDGE_RISE,
+        GPIO77_GPIO | MFP_LPM_EDGE_RISE
+};
+
+static void __init icontrol_can_init(void)
+{
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+        platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
+        spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
+}
+
+static void __init icontrol_init(void)
+{
+        mxm_8x10_barebones_init();
+        mxm_8x10_usb_host_init();
+        mxm_8x10_mmc_init();
+
+        icontrol_can_init();
+}
+
+MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
+        .phys_io        = 0x40000000,
+        .boot_params    = 0xa0000100,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+        .init_machine   = icontrol_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 5c9e11d74f4..bc78c4dc0c6 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -47,25 +47,7 @@
 
 static unsigned long idp_pin_config[] __initdata = {
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
+        GPIOxx_LCD_DSTN_16BPP,
 
         /* BTUART */
         GPIO42_BTUART_RXD,
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 5b0862df61a..b2f878bd460 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -64,7 +64,6 @@ static unsigned long imote2_pin_config[] __initdata = {
         GPIO116_GPIO,                   /* CC_CCA */
         GPIO0_GPIO,                     /* CC_FIFOP */
         GPIO16_GPIO,                    /* CCSFD */
-        GPIO39_GPIO,                    /* CSn */
         GPIO115_GPIO,                   /* Power enable */
 
         /* I2C */
@@ -72,7 +71,7 @@ static unsigned long imote2_pin_config[] __initdata = {
         GPIO118_I2C_SDA,
 
         /* SSP 3 - 802.15.4 radio */
-        GPIO39_GPIO,                    /* Chip Select */
+        GPIO39_GPIO,                    /* Chip Select */
         GPIO34_SSP3_SCLK,
         GPIO35_SSP3_TXD,
         GPIO41_SSP3_RXD,
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index bfec09b1814..1a741065045 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -129,6 +129,16 @@ enum balloon3_features {
 #define CPLD_AROUTING_LOONR2INT_BIT    6
 #define CPLD_AROUTING_LOONR2EXT_BIT    7
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)         (IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ       IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ      IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ      IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 extern int balloon3_has(enum balloon3_features feature);
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 3677a9af9c8..ffc8314520f 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -135,82 +135,6 @@
 #define IRQ_BOARD_END           (IRQ_BOARD_START + 16)
 #endif
 
-#define IRQ_SA1111_START        (IRQ_BOARD_END)
-#define IRQ_GPAIN0              (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1              (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2              (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3              (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0              (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1              (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2              (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3              (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4              (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5              (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0              (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1              (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2              (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3              (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4              (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5              (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6              (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7              (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT             (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT             (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT        (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT             (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT             (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT        (IRQ_BOARD_END + 23)
-#define SSPXMTINT               (IRQ_BOARD_END + 24)
-#define SSPRCVINT               (IRQ_BOARD_END + 25)
-#define SSPROR                  (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA          (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA          (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB          (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB          (IRQ_BOARD_END + 35)
-#define AUDTFSR                 (IRQ_BOARD_END + 36)
-#define AUDRFSR                 (IRQ_BOARD_END + 37)
-#define AUDTUR                  (IRQ_BOARD_END + 38)
-#define AUDROR                  (IRQ_BOARD_END + 39)
-#define AUDDTS                  (IRQ_BOARD_END + 40)
-#define AUDRDD                  (IRQ_BOARD_END + 41)
-#define AUDSTO                  (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR              (IRQ_BOARD_END + 43)
-#define IRQ_HCIM                (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC          (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP           (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR           (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME     (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT       (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT       (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID         (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID         (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG      (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG      (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START        (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY          (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0        (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1        (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2        (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3        (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4        (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5        (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6        (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7        (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8        (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9        (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10       (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11       (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12       (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13       (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14       (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15       (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT           (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR      (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW      (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN     (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND     (IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
@@ -219,89 +143,16 @@
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS                 (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS                 (IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS                 (IRQ_BOARD_END + 55)
 #elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
 #define NR_IRQS                 (IRQ_BOARD_END)
 #else
 #define NR_IRQS                 (IRQ_BOARD_START)
 #endif
 
-/*
- * Board specific IRQs.  Define them here.
- * Do not surround them with ifdefs.
- */
-#define LUBBOCK_IRQ(x)          (IRQ_BOARD_START + (x))
-#define LUBBOCK_SD_IRQ          LUBBOCK_IRQ(0)
-#define LUBBOCK_SA1111_IRQ      LUBBOCK_IRQ(1)
-#define LUBBOCK_USB_IRQ         LUBBOCK_IRQ(2)  /* usb connect */
-#define LUBBOCK_ETH_IRQ         LUBBOCK_IRQ(3)
-#define LUBBOCK_UCB1400_IRQ     LUBBOCK_IRQ(4)
-#define LUBBOCK_BB_IRQ          LUBBOCK_IRQ(5)
-#define LUBBOCK_USB_DISC_IRQ    LUBBOCK_IRQ(6)  /* usb disconnect */
-#define LUBBOCK_LAST_IRQ        LUBBOCK_IRQ(6)
-
-#define LPD270_IRQ(x)           (IRQ_BOARD_START + (x))
-#define LPD270_USBC_IRQ         LPD270_IRQ(2)
-#define LPD270_ETHERNET_IRQ     LPD270_IRQ(3)
-#define LPD270_AC97_IRQ         LPD270_IRQ(4)
-
-#define MAINSTONE_IRQ(x)        (IRQ_BOARD_START + (x))
-#define MAINSTONE_MMC_IRQ       MAINSTONE_IRQ(0)
-#define MAINSTONE_USIM_IRQ      MAINSTONE_IRQ(1)
-#define MAINSTONE_USBC_IRQ      MAINSTONE_IRQ(2)
-#define MAINSTONE_ETHERNET_IRQ  MAINSTONE_IRQ(3)
-#define MAINSTONE_AC97_IRQ      MAINSTONE_IRQ(4)
-#define MAINSTONE_PEN_IRQ       MAINSTONE_IRQ(5)
-#define MAINSTONE_MSINS_IRQ     MAINSTONE_IRQ(6)
-#define MAINSTONE_EXBRD_IRQ     MAINSTONE_IRQ(7)
-#define MAINSTONE_S0_CD_IRQ     MAINSTONE_IRQ(9)
-#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
-#define MAINSTONE_S0_IRQ        MAINSTONE_IRQ(11)
-#define MAINSTONE_S1_CD_IRQ     MAINSTONE_IRQ(13)
-#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
-#define MAINSTONE_S1_IRQ        MAINSTONE_IRQ(15)
-
-/* Balloon3 Interrupts */
-#define BALLOON3_IRQ(x)         (IRQ_BOARD_START + (x))
-
-#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
-#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
-
-#define BALLOON3_AUX_NIRQ       IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ      IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ      IRQ_GPIO(BALLOON3_GPIO_S0_CD)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE     (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE    (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE      (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE     (IRQ_BOARD_START + 3)
-
-/* phyCORE-PXA270 (PCM027) Interrupts */
-#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
-#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
-#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
-#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
-#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
-
-/* ITE8152 irqs */
 /* add IT8152 IRQs beyond BOARD_END */
 #ifdef CONFIG_PCI_HOST_ITE8152
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
-
-/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
-#define IT8152_LD_IRQ_COUNT     9
-#define IT8152_LP_IRQ_COUNT     16
-#define IT8152_PD_IRQ_COUNT     15
-
-/* Priorities: */
-#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
-#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
-#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
-
-#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+#define IT8152_LAST_IRQ         (IRQ_BOARD_END + 40)
 
 #if NR_IRQS < (IT8152_LAST_IRQ+1)
 #undef NR_IRQS
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
index f89fb715266..0e6440c8168 100644
--- a/arch/arm/mach-pxa/include/mach/lpd270.h
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -34,5 +34,9 @@
 #define LPD270_INT_ETHERNET     (1 << 3)  /* Ethernet controller IRQ */
 #define LPD270_INT_USBC         (1 << 2)  /* USB client cable detection IRQ */
 
+#define LPD270_IRQ(x)           (IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ         LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ     LPD270_IRQ(3)
+#define LPD270_AC97_IRQ         LPD270_IRQ(4)
 
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 751b74811d0..a0d4247f08f 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -34,6 +34,17 @@
 #define LUB_IRQ_SET_CLR         __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
 #define LUB_GP                  __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
 
+/* Board specific IRQs */
+#define LUBBOCK_IRQ(x)          (IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ          LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ      LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ         LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ         LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ     LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ          LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ    LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ        LUBBOCK_IRQ(6)
+
 #ifndef __ASSEMBLY__
 extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 3461c4302ff..86e623abd64 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -117,4 +117,21 @@
 #define MST_PCMCIA_PWR_VCC_33   0x8        /* voltage VCC = 3.3V */
 #define MST_PCMCIA_PWR_VCC_50   0x4        /* voltage VCC = 5.0V */
 
+/* board specific IRQs */
+#define MAINSTONE_IRQ(x)        (IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ       MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ      MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ      MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ  MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ      MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ       MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ     MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ     MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ     MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ        MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ     MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ        MAINSTONE_IRQ(15)
+
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index b13dc0269a6..cafadc33dfd 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -169,7 +169,6 @@
 #define GPIO86_nSDCS2           MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
 #define GPIO87_nSDCS3           MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
 #define GPIO88_RDnWR            MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET         MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 
 /* USB */
 #define GPIO9_USB_RCV           MFP_CFG_IN(GPIO9, AF1)
@@ -186,6 +185,41 @@
 #define GPIO30_ASSP_TXD         MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
 #define GPIO31_ASSP_SFRM_IN     MFP_CFG_IN(GPIO31, AF1)
 #define GPIO31_ASSP_SFRM_OUT    MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET      MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif  /* CONFIG_CPU_PXA26x */
+
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP        \
+        GPIO58_LCD_LDD_0,       \
+        GPIO59_LCD_LDD_1,       \
+        GPIO60_LCD_LDD_2,       \
+        GPIO61_LCD_LDD_3,       \
+        GPIO62_LCD_LDD_4,       \
+        GPIO63_LCD_LDD_5,       \
+        GPIO64_LCD_LDD_6,       \
+        GPIO65_LCD_LDD_7,       \
+        GPIO66_LCD_LDD_8,       \
+        GPIO67_LCD_LDD_9,       \
+        GPIO68_LCD_LDD_10,      \
+        GPIO69_LCD_LDD_11,      \
+        GPIO70_LCD_LDD_12,      \
+        GPIO71_LCD_LDD_13,      \
+        GPIO72_LCD_LDD_14,      \
+        GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_DSTN_16BPP   \
+        GPIOxx_LCD_16BPP,       \
+        GPIO74_LCD_FCLK,        \
+        GPIO75_LCD_LCLK,        \
+        GPIO76_LCD_PCLK
+
+#define GPIOxx_LCD_TFT_16BPP    \
+        GPIOxx_LCD_16BPP,       \
+        GPIO74_LCD_FCLK,        \
+        GPIO75_LCD_LCLK,        \
+        GPIO76_LCD_PCLK,        \
+        GPIO77_LCD_BIAS
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index 6543c05f47e..ec0f0b0b674 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -434,5 +434,32 @@
 #define GPIO112_nMSINS          MFP_CFG_IN(GPIO112, AF2)
 #define GPIO32_MSSCLK           MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
 
+/* commonly used pin configurations */
+#define GPIOxx_LCD_16BPP        \
+        GPIO58_LCD_LDD_0,       \
+        GPIO59_LCD_LDD_1,       \
+        GPIO60_LCD_LDD_2,       \
+        GPIO61_LCD_LDD_3,       \
+        GPIO62_LCD_LDD_4,       \
+        GPIO63_LCD_LDD_5,       \
+        GPIO64_LCD_LDD_6,       \
+        GPIO65_LCD_LDD_7,       \
+        GPIO66_LCD_LDD_8,       \
+        GPIO67_LCD_LDD_9,       \
+        GPIO68_LCD_LDD_10,      \
+        GPIO69_LCD_LDD_11,      \
+        GPIO70_LCD_LDD_12,      \
+        GPIO71_LCD_LDD_13,      \
+        GPIO72_LCD_LDD_14,      \
+        GPIO73_LCD_LDD_15
+
+#define GPIOxx_LCD_TFT_16BPP    \
+        GPIOxx_LCD_16BPP,       \
+        GPIO74_LCD_FCLK,        \
+        GPIO75_LCD_LCLK,        \
+        GPIO76_LCD_PCLK,        \
+        GPIO77_LCD_BIAS
+
+
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mxm8x10.h b/arch/arm/mach-pxa/include/mach/mxm8x10.h
new file mode 100644
index 00000000000..ffa15665a41
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mxm8x10.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_MXM_8X10_H
+#define __MACH_MXM_8X10_H
+
+#define MXM_8X10_ETH_PHYS       0x13000000
+
+#if defined(CONFIG_MMC)
+
+#define MXM_8X10_SD_nCD (72)
+#define MXM_8X10_SD_WP (84)
+
+extern void mxm_8x10_mmc_init(void);
+#else
+static inline void mxm_8x10_mmc_init(void) {}
+#endif
+
+extern void mxm_8x10_usb_host_init(void);
+extern void mxm_8x10_ac97_init(void);
+
+extern void mxm_8x10_barebones_init(void);
+
+#endif /* __MACH_MXM_8X10_H */
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4dcd2e8baa6..04083263167 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -23,6 +23,13 @@
  * Definitions of CPU card resources only
  */
 
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
 /* I2C RTC */
 #define PCM027_RTC_IRQ_GPIO     0
 #define PCM027_RTC_IRQ          IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
index cb5cb766f0f..be1be5b6db5 100644
--- a/arch/arm/mach-pxa/include/mach/ssp.h
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -46,6 +46,7 @@ struct ssp_device {
         int             drcmr_tx;
 };
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 /*
  * SSP initialisation flags
  */
@@ -78,6 +79,7 @@ void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
 int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
 int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
 void ssp_exit(struct ssp_dev *dev);
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 /**
  * ssp_write_reg - Write to a SSP register
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 237734b5b1b..5ef91d9d17e 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -10,20 +10,41 @@
  */
 
 #include <linux/serial_reg.h>
-#include <mach/regs-uart.h>
 #include <asm/mach-types.h>
 
-#define __REG(x)       ((volatile unsigned long *)x)
+#define FFUART_BASE     (0x40100000)
+#define BTUART_BASE     (0x40200000)
+#define STUART_BASE     (0x40700000)
 
-static volatile unsigned long *UART = FFUART;
+static unsigned long uart_base = FFUART_BASE;
+static unsigned int uart_shift = 2;
+static unsigned int uart_is_pxa = 1;
+
+static inline unsigned char uart_read(int offset)
+{
+        return *(volatile unsigned char *)(uart_base + (offset << uart_shift));
+}
+
+static inline void uart_write(unsigned char val, int offset)
+{
+        *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val;
+}
+
+static inline int uart_is_enabled(void)
+{
+        /* assume enabled by default for non-PXA uarts */
+        return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1;
+}
 
 static inline void putc(char c)
 {
-        if (!(UART[UART_IER] & IER_UUE))
+        if (!uart_is_enabled())
                 return;
-        while (!(UART[UART_LSR] & LSR_TDRQ))
+
+        while (!(uart_read(UART_LSR) & UART_LSR_THRE))
                 barrier();
-        UART[UART_TX] = c;
+
+        uart_write(c, UART_TX);
 }
 
 /*
@@ -38,7 +59,13 @@ static inline void arch_decomp_setup(void)
         if (machine_is_littleton() || machine_is_intelmote2()
             || machine_is_csb726() || machine_is_stargate2()
             || machine_is_cm_x300() || machine_is_balloon3())
-                UART = STUART;
+                uart_base = STUART_BASE;
+
+        if (machine_is_arcom_zeus()) {
+                uart_base = 0x10000000; /* nCS4 */
+                uart_shift = 1;
+                uart_is_pxa = 0;
+        }
 }
 
 /*
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
index c387046d2f2..6e119976003 100644
--- a/arch/arm/mach-pxa/include/mach/zeus.h
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -58,6 +58,8 @@
 #define ZEUS_EXT1_GPIO(x)       (ZEUS_EXT1_GPIO_BASE + (x))
 #define ZEUS_USER_GPIO(x)       (ZEUS_USER_GPIO_BASE + (x))
 
+#define ZEUS_CAN_SHDN_GPIO      ZEUS_EXT1_GPIO(2)
+
 /*
  * CPLD registers:
  * Only 4 registers, but spreaded over a 32MB address space.
@@ -68,7 +70,6 @@
 #define ZEUS_CPLD_VERSION       (ZEUS_CPLD + 0x0000)
 #define ZEUS_CPLD_ISA_IRQ       (ZEUS_CPLD + 0x1000)
 #define ZEUS_CPLD_CONTROL       (ZEUS_CPLD + 0x2000)
-#define ZEUS_CPLD_EXTWDOG       (ZEUS_CPLD + 0x3000)
 
 /* CPLD register bits */
 #define ZEUS_CPLD_CONTROL_CF_RST        0x01
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6112af431fa..1beb40f692f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
                 saved_icmr[i] = _ICMR(irq);
                 _ICMR(irq) = 0;
         }
-        for (i = 0; i < pxa_internal_irq_nr; i++)
-                saved_ipr[i] = IPR(i);
+
+        if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+                for (i = 0; i < pxa_internal_irq_nr; i++)
+                        saved_ipr[i] = IPR(i);
+        }
 
         return 0;
 }
@@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev)
 {
         int i, irq = PXA_IRQ(0);
 
+        if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+                for (i = 0; i < pxa_internal_irq_nr; i++)
+                        IPR(i) = saved_ipr[i];
+        }
+
         for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
                 _ICMR(irq) = saved_icmr[i];
                 _ICLR(irq) = 0;
         }
-        for (i = 0; i < pxa_internal_irq_nr; i++)
-                IPR(i) = saved_ipr[i];
 
         ICCR = 1;
         return 0;
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1373c22dbb8..d279507fc74 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -83,6 +83,10 @@ static unsigned long lpd270_pin_config[] __initdata = {
         GPIO89_USBH1_PEN,
 
         /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
         GPIO45_AC97_SYSCLK,
 
         GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
@@ -121,7 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 
         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
         do {
-                GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+                desc->chip->ack(irq);   /* clear useless edge notification */
                 if (likely(pending)) {
                         irq = LPD270_IRQ(0) + __ffs(pending);
                         generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 98ee7e59029..63d65a2a038 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -66,26 +66,14 @@ static unsigned long lubbock_pin_config[] __initdata = {
         GPIO25_SSP1_TXD,
         GPIO26_SSP1_RXD,
 
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         /* LCD - 16bpp DSTN */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
+        GPIOxx_LCD_DSTN_16BPP,
 
         /* BTUART */
         GPIO42_BTUART_RXD,
@@ -158,7 +146,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
         unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
         do {
-                GEDR(0) = GPIO_bit(0);  /* clear our parent irq */
+                desc->chip->ack(irq);   /* clear our parent irq */
                 if (likely(pending)) {
                         irq = LUBBOCK_IRQ(0) + __ffs(pending);
                         generic_handle_irq(irq);
@@ -240,11 +228,18 @@ static struct resource sa1111_resources[] = {
         },
 };
 
+static struct sa1111_platform_data sa1111_info = {
+        .irq_base       = IRQ_BOARD_END,
+};
+
 static struct platform_device sa1111_device = {
         .name           = "sa1111",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(sa1111_resources),
         .resource       = sa1111_resources,
+        .dev            = {
+                .platform_data  = &sa1111_info,
+        },
 };
 
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 189f330719a..e81dd0c8e40 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -88,26 +88,7 @@ static unsigned long magician_pin_config[] __initdata = {
         GPIO112_MMC_CMD,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* QCI */
         GPIO12_CIF_DD_7,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 851ee0fc32e..5543c64da9e 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -60,26 +60,7 @@ static unsigned long mainstone_pin_config[] = {
         GPIO15_nCS_1,
 
         /* LCD - 16bpp Active TFT */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
         GPIO16_PWM0_OUT,        /* Backlight */
 
         /* MMC */
@@ -107,6 +88,10 @@ static unsigned long mainstone_pin_config[] = {
         GPIO57_nIOIS16,
 
         /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
         GPIO45_AC97_SYSCLK,
 
         /* Keypad */
@@ -162,7 +147,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
         unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
         do {
-                GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
+                desc->chip->ack(irq);   /* clear useless edge notification */
                 if (likely(pending)) {
                         irq = MAINSTONE_IRQ(0) + __ffs(pending);
                         generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2466a44d8fd..843fcca76e2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -86,25 +86,7 @@ static unsigned long mioa701_pin_config[] = {
         MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* QCI */
         GPIO12_CIF_DD_7,
@@ -155,6 +137,10 @@ static unsigned long mioa701_pin_config[] = {
         GPIO41_FFUART_RTS,
 
         /* Sound */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
         GPIO89_AC97_SYSCLK,
         MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
 
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
new file mode 100644
index 00000000000..8c9c6f0d56b
--- /dev/null
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -0,0 +1,474 @@
+/*
+ * linux/arch/arm/mach-pxa/mxm8x10.c
+ *
+ * Support for the Embedian MXM-8x10 Computer on Module
+ *
+ * Copyright (C) 2006 Marvell International Ltd.
+ * Copyright (C) 2009 Embedian Inc.
+ * Copyright (C) 2009 TMT Services & Supplies (Pty) Ltd.
+ *
+ * 2007-09-04: eric miao <eric.y.miao@gmail.com>
+ *             rewrite to align with latest kernel
+ *
+ * 2010-01-09: Edwin Peer <epeer@tmtservices.co.za>
+ *             Hennie van der Merwe <hvdmerwe@tmtservices.co.za>
+ *             rework for upstream merge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
+
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa320.h>
+
+#include <mach/mxm8x10.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* GPIO pin definition
+
+External device stuff   - Leave unconfigured for now...
+---------------------
+GPIO0   -   DREQ    (External DMA Request)
+GPIO3   -   nGCS2   (External Chip Select) Where is nGCS0; nGCS1; nGCS4; nGCS5 ?
+GPIO4   -   nGCS3
+GPIO15  -   EXT_GPIO1
+GPIO16  -   EXT_GPIO2
+GPIO17  -   EXT_GPIO3
+GPIO24  -   EXT_GPIO4
+GPIO25  -   EXT_GPIO5
+GPIO26  -   EXT_GPIO6
+GPIO27  -   EXT_GPIO7
+GPIO28  -   EXT_GPIO8
+GPIO29  -   EXT_GPIO9
+GPIO30  -   EXT_GPIO10
+GPIO31  -   EXT_GPIO11
+GPIO57  -   EXT_GPIO12
+GPIO74  -   EXT_IRQ1
+GPIO75  -   EXT_IRQ2
+GPIO76  -   EXT_IRQ3
+GPIO77  -   EXT_IRQ4
+GPIO78  -   EXT_IRQ5
+GPIO79  -   EXT_IRQ6
+GPIO80  -   EXT_IRQ7
+GPIO81  -   EXT_IRQ8
+GPIO87  -   VCCIO_PWREN (External Device PWREN)
+
+Dallas 1-Wire   - Leave unconfigured for now...
+-------------
+GPIO0_2 -   DS - 1Wire
+
+Ethernet
+--------
+GPIO1   -   DM9000 PWR
+GPIO9   -   DM9K_nIRQ
+GPIO36  -   DM9K_RESET
+
+Keypad  - Leave unconfigured by for now...
+------
+GPIO1_2 -   KP_DKIN0
+GPIO5_2 -   KP_MKOUT7
+GPIO82  -   KP_DKIN1
+GPIO85  -   KP_DKIN2
+GPIO86  -   KP_DKIN3
+GPIO113 -   KP_MKIN0
+GPIO114 -   KP_MKIN1
+GPIO115 -   KP_MKIN2
+GPIO116 -   KP_MKIN3
+GPIO117 -   KP_MKIN4
+GPIO118 -   KP_MKIN5
+GPIO119 -   KP_MKIN6
+GPIO120 -   KP_MKIN7
+GPIO121 -   KP_MKOUT0
+GPIO122 -   KP_MKOUT1
+GPIO122 -   KP_MKOUT2
+GPIO123 -   KP_MKOUT3
+GPIO124 -   KP_MKOUT4
+GPIO125 -   KP_MKOUT5
+GPIO127 -   KP_MKOUT6
+
+Data Bus    - Leave unconfigured for now...
+--------
+GPIO2   -   nWait (Data Bus)
+
+USB Device
+----------
+GPIO4_2 -   USBD_PULLUP
+GPIO10  -   UTM_CLK (USB Device UTM Clk)
+GPIO49  -   USB 2.0 Device UTM_DATA0
+GPIO50  -   USB 2.0 Device UTM_DATA1
+GPIO51  -   USB 2.0 Device UTM_DATA2
+GPIO52  -   USB 2.0 Device UTM_DATA3
+GPIO53  -   USB 2.0 Device UTM_DATA4
+GPIO54  -   USB 2.0 Device UTM_DATA5
+GPIO55  -   USB 2.0 Device UTM_DATA6
+GPIO56  -   USB 2.0 Device UTM_DATA7
+GPIO58  -   UTM_RXVALID (USB 2.0 Device)
+GPIO59  -   UTM_RXACTIVE (USB 2.0 Device)
+GPIO60  -   UTM_RXERROR
+GPIO61  -   UTM_OPMODE0
+GPIO62  -   UTM_OPMODE1
+GPIO71  -   USBD_INT    (USB Device?)
+GPIO73  -   UTM_TXREADY (USB 2.0 Device)
+GPIO83  -   UTM_TXVALID (USB 2.0 Device)
+GPIO98  -   UTM_RESET   (USB 2.0 device)
+GPIO99  -   UTM_XCVR_SELECT
+GPIO100 -   UTM_TERM_SELECT
+GPIO101 -   UTM_SUSPENDM_X
+GPIO102 -   UTM_LINESTATE0
+GPIO103 -   UTM_LINESTATE1
+
+Card-Bus Interface  - Leave unconfigured for now...
+------------------
+GPIO5   -   nPIOR (I/O space output enable)
+GPIO6   -   nPIOW (I/O space write enable)
+GPIO7   -   nIOS16 (Input from I/O space telling size of data bus)
+GPIO8   -   nPWAIT (Input for inserting wait states)
+
+LCD
+---
+GPIO6_2     -   LDD0
+GPIO7_2     -   LDD1
+GPIO8_2     -   LDD2
+GPIO9_2     -   LDD3
+GPIO11_2    -   LDD5
+GPIO12_2    -   LDD6
+GPIO13_2    -   LDD7
+GPIO14_2    -   VSYNC
+GPIO15_2    -   HSYNC
+GPIO16_2    -   VCLK
+GPIO17_2    -   HCLK
+GPIO18_2    -   VDEN
+GPIO63      -   LDD8    (CPU LCD)
+GPIO64      -   LDD9    (CPU LCD)
+GPIO65      -   LDD10   (CPU LCD)
+GPIO66      -   LDD11   (CPU LCD)
+GPIO67      -   LDD12   (CPU LCD)
+GPIO68      -   LDD13   (CPU LCD)
+GPIO69      -   LDD14   (CPU LCD)
+GPIO70      -   LDD15   (CPU LCD)
+GPIO88      -   VCCLCD_PWREN (LCD Panel PWREN)
+GPIO97      -   BACKLIGHT_EN
+GPIO104     -   LCD_PWREN
+
+PWM   - Leave unconfigured for now...
+---
+GPIO11  -   PWM0
+GPIO12  -   PWM1
+GPIO13  -   PWM2
+GPIO14  -   PWM3
+
+SD-CARD
+-------
+GPIO18  -   SDDATA0
+GPIO19  -   SDDATA1
+GPIO20  -   SDDATA2
+GPIO21  -   SDDATA3
+GPIO22  -   SDCLK
+GPIO23  -   SDCMD
+GPIO72  -   SD_WP
+GPIO84  -   SD_nIRQ_CD  (SD-Card)
+
+I2C
+---
+GPIO32  -   I2CSCL
+GPIO33  -   I2CSDA
+
+AC97
+----
+GPIO35  -   AC97_SDATA_IN
+GPIO37  -   AC97_SDATA_OUT
+GPIO38  -   AC97_SYNC
+GPIO39  -   AC97_BITCLK
+GPIO40  -   AC97_nRESET
+
+UART1
+-----
+GPIO41  -   UART_RXD1
+GPIO42  -   UART_TXD1
+GPIO43  -   UART_CTS1
+GPIO44  -   UART_DCD1
+GPIO45  -   UART_DSR1
+GPIO46  -   UART_nRI1
+GPIO47  -   UART_DTR1
+GPIO48  -   UART_RTS1
+
+UART2
+-----
+GPIO109 -   RTS2
+GPIO110 -   RXD2
+GPIO111 -   TXD2
+GPIO112 -   nCTS2
+
+UART3
+-----
+GPIO105 -   nCTS3
+GPIO106 -   nRTS3
+GPIO107 -   TXD3
+GPIO108 -   RXD3
+
+SSP3    - Leave unconfigured for now...
+----
+GPIO89  -   SSP3_CLK
+GPIO90  -   SSP3_SFRM
+GPIO91  -   SSP3_TXD
+GPIO92  -   SSP3_RXD
+
+SSP4
+GPIO93  -   SSP4_CLK
+GPIO94  -   SSP4_SFRM
+GPIO95  -   SSP4_TXD
+GPIO96  -   SSP4_RXD
+*/
+
+static mfp_cfg_t mfp_cfg[] __initdata = {
+        /* USB */
+        GPIO10_UTM_CLK,
+        GPIO49_U2D_PHYDATA_0,
+        GPIO50_U2D_PHYDATA_1,
+        GPIO51_U2D_PHYDATA_2,
+        GPIO52_U2D_PHYDATA_3,
+        GPIO53_U2D_PHYDATA_4,
+        GPIO54_U2D_PHYDATA_5,
+        GPIO55_U2D_PHYDATA_6,
+        GPIO56_U2D_PHYDATA_7,
+        GPIO58_UTM_RXVALID,
+        GPIO59_UTM_RXACTIVE,
+        GPIO60_U2D_RXERROR,
+        GPIO61_U2D_OPMODE0,
+        GPIO62_U2D_OPMODE1,
+        GPIO71_GPIO, /* USBD_INT */
+        GPIO73_UTM_TXREADY,
+        GPIO83_U2D_TXVALID,
+        GPIO98_U2D_RESET,
+        GPIO99_U2D_XCVR_SEL,
+        GPIO100_U2D_TERM_SEL,
+        GPIO101_U2D_SUSPEND,
+        GPIO102_UTM_LINESTATE_0,
+        GPIO103_UTM_LINESTATE_1,
+        GPIO4_2_GPIO | MFP_PULL_HIGH, /* UTM_PULLUP */
+
+        /* DM9000 */
+        GPIO1_GPIO,
+        GPIO9_GPIO,
+        GPIO36_GPIO,
+
+        /* AC97 */
+        GPIO35_AC97_SDATA_IN_0,
+        GPIO37_AC97_SDATA_OUT,
+        GPIO38_AC97_SYNC,
+        GPIO39_AC97_BITCLK,
+        GPIO40_AC97_nACRESET,
+
+        /* UARTS */
+        GPIO41_UART1_RXD,
+        GPIO42_UART1_TXD,
+        GPIO43_UART1_CTS,
+        GPIO44_UART1_DCD,
+        GPIO45_UART1_DSR,
+        GPIO46_UART1_RI,
+        GPIO47_UART1_DTR,
+        GPIO48_UART1_RTS,
+
+        GPIO109_UART2_RTS,
+        GPIO110_UART2_RXD,
+        GPIO111_UART2_TXD,
+        GPIO112_UART2_CTS,
+
+        GPIO105_UART3_CTS,
+        GPIO106_UART3_RTS,
+        GPIO107_UART3_TXD,
+        GPIO108_UART3_RXD,
+
+        GPIO78_GPIO,
+        GPIO79_GPIO,
+        GPIO80_GPIO,
+        GPIO81_GPIO,
+
+        /* I2C */
+        GPIO32_I2C_SCL,
+        GPIO33_I2C_SDA,
+
+        /* MMC */
+        GPIO18_MMC1_DAT0,
+        GPIO19_MMC1_DAT1,
+        GPIO20_MMC1_DAT2,
+        GPIO21_MMC1_DAT3,
+        GPIO22_MMC1_CLK,
+        GPIO23_MMC1_CMD,
+        GPIO72_GPIO | MFP_PULL_HIGH, /* Card Detect */
+        GPIO84_GPIO | MFP_PULL_LOW, /* Write Protect */
+
+        /* IRQ */
+        GPIO74_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ1 */
+        GPIO75_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ2 */
+        GPIO76_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ3 */
+        GPIO77_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ4 */
+        GPIO78_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ5 */
+        GPIO79_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ6 */
+        GPIO80_GPIO | MFP_LPM_EDGE_RISE, /* EXT_IRQ7 */
+        GPIO81_GPIO | MFP_LPM_EDGE_RISE  /* EXT_IRQ8 */
+};
+
+/* MMC/MCI Support */
+#if defined(CONFIG_MMC)
+static struct pxamci_platform_data mxm_8x10_mci_platform_data = {
+        .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+        .detect_delay = 1,
+        .gpio_card_detect = MXM_8X10_SD_nCD,
+        .gpio_card_ro = MXM_8X10_SD_WP,
+        .gpio_power = -1
+};
+
+void __init mxm_8x10_mmc_init(void)
+{
+        pxa_set_mci_info(&mxm_8x10_mci_platform_data);
+}
+#endif
+
+/* USB Open Host Controler Interface */
+static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
+        .port_mode = PMM_NPS_MODE,
+        .flags = ENABLE_PORT_ALL
+};
+
+void __init mxm_8x10_usb_host_init(void)
+{
+        pxa_set_ohci_info(&mxm_8x10_ohci_platform_data);
+}
+
+/* AC97 Sound Support */
+static struct platform_device mxm_8x10_ac97_device = {
+        .name = "pxa2xx-ac97"
+};
+
+void __init mxm_8x10_ac97_init(void)
+{
+        platform_device_register(&mxm_8x10_ac97_device);
+}
+
+/* NAND flash Support */
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+#define NAND_BLOCK_SIZE SZ_128K
+#define NB(x)           (NAND_BLOCK_SIZE * (x))
+static struct mtd_partition mxm_8x10_nand_partitions[] = {
+        [0] = {
+               .name = "boot",
+               .size = NB(0x002),
+               .offset = NB(0x000),
+               .mask_flags = MTD_WRITEABLE
+        },
+        [1] = {
+               .name = "kernel",
+               .size = NB(0x010),
+               .offset = NB(0x002),
+               .mask_flags = MTD_WRITEABLE
+        },
+        [2] = {
+               .name = "root",
+               .size = NB(0x36c),
+               .offset = NB(0x012)
+        },
+        [3] = {
+               .name = "bbt",
+               .size = NB(0x082),
+               .offset = NB(0x37e),
+               .mask_flags = MTD_WRITEABLE
+        }
+};
+
+static struct pxa3xx_nand_platform_data mxm_8x10_nand_info = {
+        .enable_arbiter = 1,
+        .keep_config = 1,
+        .parts = mxm_8x10_nand_partitions,
+        .nr_parts = ARRAY_SIZE(mxm_8x10_nand_partitions)
+};
+
+static void __init mxm_8x10_nand_init(void)
+{
+        pxa3xx_set_nand_info(&mxm_8x10_nand_info);
+}
+#else
+static inline void mxm_8x10_nand_init(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+/* Ethernet support: Davicom DM9000 */
+static struct resource dm9k_resources[] = {
+        [0] = {
+               .start = MXM_8X10_ETH_PHYS + 0x300,
+               .end = MXM_8X10_ETH_PHYS + 0x300,
+               .flags = IORESOURCE_MEM
+        },
+        [1] = {
+               .start = MXM_8X10_ETH_PHYS + 0x308,
+               .end = MXM_8X10_ETH_PHYS + 0x308,
+               .flags = IORESOURCE_MEM
+        },
+        [2] = {
+               .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+               .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
+        }
+};
+
+static struct dm9000_plat_data dm9k_plat_data = {
+        .flags = DM9000_PLATF_16BITONLY
+};
+
+static struct platform_device dm9k_device = {
+        .name = "dm9000",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(dm9k_resources),
+        .resource = dm9k_resources,
+        .dev = {
+                .platform_data = &dm9k_plat_data
+        }
+};
+
+static void __init mxm_8x10_ethernet_init(void)
+{
+        platform_device_register(&dm9k_device);
+}
+
+/* PXA UARTs */
+static void __init mxm_8x10_uarts_init(void)
+{
+        pxa_set_ffuart_info(NULL);
+        pxa_set_btuart_info(NULL);
+        pxa_set_stuart_info(NULL);
+}
+
+/* I2C and Real Time Clock */
+static struct i2c_board_info __initdata mxm_8x10_i2c_devices[] = {
+        {
+                I2C_BOARD_INFO("ds1337", 0x68)
+        }
+};
+
+static void __init mxm_8x10_i2c_init(void)
+{
+        i2c_register_board_info(0, mxm_8x10_i2c_devices,
+                                ARRAY_SIZE(mxm_8x10_i2c_devices));
+        pxa_set_i2c_info(NULL);
+}
+
+void __init mxm_8x10_barebones_init(void)
+{
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_cfg));
+
+        mxm_8x10_uarts_init();
+        mxm_8x10_nand_init();
+        mxm_8x10_i2c_init();
+        mxm_8x10_ethernet_init();
+}
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index e100af78b16..f70c75b3876 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -83,26 +83,7 @@ static unsigned long palmld_pin_config[] __initdata = {
         GPIO105_KP_MKOUT_2,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* PWM */
         GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 8fe3ec27568..d902a813aae 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -87,26 +87,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
         GPIO105_KP_MKOUT_2,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* PWM */
         GPIO16_PWM0_OUT,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index b992f07ece2..717d7a63867 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -84,26 +84,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
         GPIO36_GPIO,    /* pullup */
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* MATRIX KEYPAD */
         GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,       /* in 0 */
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index dc728d6ab94..3d284ff1a64 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -73,26 +73,7 @@ static unsigned long palmte2_pin_config[] __initdata = {
         GPIO47_FICP_TXD,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* GPIO KEYS */
         GPIO5_GPIO,     /* notes */
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index b433bb49671..d8b4469607a 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -99,25 +99,7 @@ static unsigned long treo_pin_config[] __initdata = {
         GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,        /* Hotsync button */
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* Quick Capture Interface */
         GPIO84_CIF_FV,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index b37a025c0b7..007b58c11f8 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -110,26 +110,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
         GPIO105_KP_MKOUT_2,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* FFUART */
         GPIO34_FFUART_RXD,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 1c5d68a9451..3a7925ca394 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -95,26 +95,8 @@ static unsigned long palmz72_pin_config[] __initdata = {
         GPIO105_KP_MKOUT_2,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
+
         GPIO20_GPIO,    /* bl power */
         GPIO21_GPIO,    /* LCD border switch */
         GPIO22_GPIO,    /* LCD border color */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index d5255ae74fe..9d0ecea1760 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -58,6 +58,12 @@ static unsigned long pcm990_pin_config[] __initdata = {
         /* I2C */
         GPIO117_I2C_SCL,
         GPIO118_I2C_SDA,
+
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
 };
 
 /*
@@ -259,8 +265,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
         unsigned long pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 
         do {
-                GEDR(PCM990_CTRL_INT_IRQ_GPIO) =
-                                        GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
+                desc->chip->ack(irq);   /* clear our parent IRQ */
                 if (likely(pending)) {
                         irq = PCM027_IRQ(0) + __ffs(pending);
                         generic_handle_irq(irq);
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index c2b938a4d5c..d58a52415d7 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -91,26 +91,7 @@ static unsigned long poodle_pin_config[] __initdata = {
         GPIO35_FFUART_CTS,
 
         /* LCD */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* PC Card */
         GPIO48_nPOE,
@@ -193,11 +174,18 @@ static struct resource locomo_resources[] = {
         },
 };
 
+static struct locomo_platform_data locomo_info = {
+        .irq_base       = IRQ_BOARD_START,
+};
+
 struct platform_device poodle_locomo_device = {
         .name           = "locomo",
         .id             = 0,
         .num_resources  = ARRAY_SIZE(locomo_resources),
         .resource       = locomo_resources,
+        .dev            = {
+                .platform_data  = &locomo_info,
+        },
 };
 
 EXPORT_SYMBOL(poodle_locomo_device);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6a0b73167e0..7c53543ba2d 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -40,6 +40,25 @@ void pxa27x_clear_otgph(void)
 }
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
+static unsigned long ac97_reset_config[] = {
+        GPIO95_AC97_nRESET,
+        GPIO95_GPIO,
+        GPIO113_AC97_nRESET,
+        GPIO113_GPIO,
+};
+
+void pxa27x_assert_ac97reset(int reset_gpio, int on)
+{
+        if (reset_gpio == 113)
+                pxa2xx_mfp_config(on ? &ac97_reset_config[0] :
+                                       &ac97_reset_config[1], 1);
+
+        if (reset_gpio == 95)
+                pxa2xx_mfp_config(on ? &ac97_reset_config[2] :
+                                       &ac97_reset_config[3], 1);
+}
+EXPORT_SYMBOL_GPL(pxa27x_assert_ac97reset);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK        13000000
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
new file mode 100644
index 00000000000..3184bdc1452
--- /dev/null
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -0,0 +1,1108 @@
+/*
+ * arch/arm/mach-pxa/raumfeld.c
+ *
+ * Support for the following Raumfeld devices:
+ *
+ *      * Controller
+ *      * Connector
+ *      * Speaker S/M
+ *
+ * See http://www.raumfeld.com for details.
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/input.h>
+#include <linux/rotary_encoder.h>
+#include <linux/gpio_keys.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/leds.h>
+#include <linux/w1-gpio.h>
+#include <linux/sched.h>
+#include <linux/pwm_backlight.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lis3lv02d.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/max8660.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/ohci.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+/* common GPIO  definitions */
+
+/* inputs */
+#define GPIO_ON_OFF             (14)
+#define GPIO_VOLENC_A           (19)
+#define GPIO_VOLENC_B           (20)
+#define GPIO_CHARGE_DONE        (23)
+#define GPIO_CHARGE_IND         (27)
+#define GPIO_TOUCH_IRQ          (32)
+#define GPIO_ETH_IRQ            (40)
+#define GPIO_SPI_MISO           (98)
+#define GPIO_ACCEL_IRQ          (104)
+#define GPIO_RESCUE_BOOT        (115)
+#define GPIO_DOCK_DETECT        (116)
+#define GPIO_KEY1               (117)
+#define GPIO_KEY2               (118)
+#define GPIO_KEY3               (119)
+#define GPIO_CHARGE_USB_OK      (112)
+#define GPIO_CHARGE_DC_OK       (101)
+#define GPIO_CHARGE_USB_SUSP    (102)
+
+/* outputs */
+#define GPIO_SHUTDOWN_SUPPLY    (16)
+#define GPIO_SHUTDOWN_BATT      (18)
+#define GPIO_CHRG_PEN2          (31)
+#define GPIO_TFT_VA_EN          (33)
+#define GPIO_SPDIF_CS           (34)
+#define GPIO_LED2               (35)
+#define GPIO_LED1               (36)
+#define GPIO_SPDIF_RESET        (38)
+#define GPIO_SPI_CLK            (95)
+#define GPIO_MCLK_DAC_CS        (96)
+#define GPIO_SPI_MOSI           (97)
+#define GPIO_W1_PULLUP_ENABLE   (105)
+#define GPIO_DISPLAY_ENABLE     (106)
+#define GPIO_MCLK_RESET         (111)
+#define GPIO_W2W_RESET          (113)
+#define GPIO_W2W_PDN            (114)
+#define GPIO_CODEC_RESET        (120)
+#define GPIO_AUDIO_VA_ENABLE    (124)
+#define GPIO_ACCEL_CS           (125)
+#define GPIO_ONE_WIRE           (126)
+
+/*
+ * GPIO configurations
+ */
+static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
+        /* UART1 */
+        GPIO77_UART1_RXD,
+        GPIO78_UART1_TXD,
+        GPIO79_UART1_CTS,
+        GPIO81_UART1_DSR,
+        GPIO83_UART1_DTR,
+        GPIO84_UART1_RTS,
+
+        /* UART3 */
+        GPIO110_UART3_RXD,
+
+        /* USB Host */
+        GPIO0_2_USBH_PEN,
+        GPIO1_2_USBH_PWR,
+
+        /* I2C */
+        GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+        GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+        /* SPI */
+        GPIO34_GPIO,    /* SPDIF_CS */
+        GPIO96_GPIO,    /* MCLK_CS */
+        GPIO125_GPIO,   /* ACCEL_CS */
+
+        /* MMC */
+        GPIO3_MMC1_DAT0,
+        GPIO4_MMC1_DAT1,
+        GPIO5_MMC1_DAT2,
+        GPIO6_MMC1_DAT3,
+        GPIO7_MMC1_CLK,
+        GPIO8_MMC1_CMD,
+
+        /* One-wire */
+        GPIO126_GPIO | MFP_LPM_FLOAT,
+        GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
+
+        /* CHRG_USB_OK */
+        GPIO101_GPIO | MFP_PULL_HIGH,
+        /* CHRG_USB_OK */
+        GPIO112_GPIO | MFP_PULL_HIGH,
+        /* CHRG_USB_SUSP */
+        GPIO102_GPIO,
+        /* DISPLAY_ENABLE */
+        GPIO106_GPIO,
+        /* DOCK_DETECT */
+        GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+        /* LCD */
+        GPIO54_LCD_LDD_0,
+        GPIO55_LCD_LDD_1,
+        GPIO56_LCD_LDD_2,
+        GPIO57_LCD_LDD_3,
+        GPIO58_LCD_LDD_4,
+        GPIO59_LCD_LDD_5,
+        GPIO60_LCD_LDD_6,
+        GPIO61_LCD_LDD_7,
+        GPIO62_LCD_LDD_8,
+        GPIO63_LCD_LDD_9,
+        GPIO64_LCD_LDD_10,
+        GPIO65_LCD_LDD_11,
+        GPIO66_LCD_LDD_12,
+        GPIO67_LCD_LDD_13,
+        GPIO68_LCD_LDD_14,
+        GPIO69_LCD_LDD_15,
+        GPIO70_LCD_LDD_16,
+        GPIO71_LCD_LDD_17,
+        GPIO72_LCD_FCLK,
+        GPIO73_LCD_LCLK,
+        GPIO74_LCD_PCLK,
+        GPIO75_LCD_BIAS,
+};
+
+static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
+        /* UART1 */
+        GPIO77_UART1_RXD,
+        GPIO78_UART1_TXD,
+        GPIO79_UART1_CTS,
+        GPIO81_UART1_DSR,
+        GPIO83_UART1_DTR,
+        GPIO84_UART1_RTS,
+
+        /* UART3 */
+        GPIO110_UART3_RXD,
+
+        /* USB Host */
+        GPIO0_2_USBH_PEN,
+        GPIO1_2_USBH_PWR,
+
+        /* I2C */
+        GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+        GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+        /* SPI */
+        GPIO34_GPIO,    /* SPDIF_CS */
+        GPIO96_GPIO,    /* MCLK_CS */
+        GPIO125_GPIO,   /* ACCEL_CS */
+
+        /* MMC */
+        GPIO3_MMC1_DAT0,
+        GPIO4_MMC1_DAT1,
+        GPIO5_MMC1_DAT2,
+        GPIO6_MMC1_DAT3,
+        GPIO7_MMC1_CLK,
+        GPIO8_MMC1_CMD,
+
+        /* Ethernet */
+        GPIO1_nCS2,                     /* CS */
+        GPIO40_GPIO | MFP_PULL_HIGH,    /* IRQ */
+
+        /* SSP for I2S */
+        GPIO85_SSP1_SCLK,
+        GPIO89_SSP1_EXTCLK,
+        GPIO86_SSP1_FRM,
+        GPIO87_SSP1_TXD,
+        GPIO88_SSP1_RXD,
+        GPIO90_SSP1_SYSCLK,
+
+        /* SSP2 for S/PDIF */
+        GPIO25_SSP2_SCLK,
+        GPIO26_SSP2_FRM,
+        GPIO27_SSP2_TXD,
+        GPIO29_SSP2_EXTCLK,
+
+        /* LEDs */
+        GPIO35_GPIO | MFP_LPM_PULL_LOW,
+        GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
+        /* UART1 */
+        GPIO77_UART1_RXD,
+        GPIO78_UART1_TXD,
+        GPIO79_UART1_CTS,
+        GPIO81_UART1_DSR,
+        GPIO83_UART1_DTR,
+        GPIO84_UART1_RTS,
+
+        /* UART3 */
+        GPIO110_UART3_RXD,
+
+        /* USB Host */
+        GPIO0_2_USBH_PEN,
+        GPIO1_2_USBH_PWR,
+
+        /* I2C */
+        GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+        GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
+
+        /* SPI */
+        GPIO34_GPIO,    /* SPDIF_CS */
+        GPIO96_GPIO,    /* MCLK_CS */
+        GPIO125_GPIO,   /* ACCEL_CS */
+
+        /* MMC */
+        GPIO3_MMC1_DAT0,
+        GPIO4_MMC1_DAT1,
+        GPIO5_MMC1_DAT2,
+        GPIO6_MMC1_DAT3,
+        GPIO7_MMC1_CLK,
+        GPIO8_MMC1_CMD,
+
+        /* Ethernet */
+        GPIO1_nCS2,                     /* CS */
+        GPIO40_GPIO | MFP_PULL_HIGH,    /* IRQ */
+
+        /* SSP for I2S */
+        GPIO85_SSP1_SCLK,
+        GPIO89_SSP1_EXTCLK,
+        GPIO86_SSP1_FRM,
+        GPIO87_SSP1_TXD,
+        GPIO88_SSP1_RXD,
+        GPIO90_SSP1_SYSCLK,
+
+        /* LEDs */
+        GPIO35_GPIO | MFP_LPM_PULL_LOW,
+        GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
+};
+
+/*
+ * SMSC LAN9220 Ethernet
+ */
+
+static struct resource smc91x_resources[] = {
+        {
+                .start  = PXA3xx_CS2_PHYS,
+                .end    = PXA3xx_CS2_PHYS + 0xfffff,
+                .flags  = IORESOURCE_MEM,
+        },
+        {
+                .start  = gpio_to_irq(GPIO_ETH_IRQ),
+                .end    = gpio_to_irq(GPIO_ETH_IRQ),
+                .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+        }
+};
+
+static struct smsc911x_platform_config raumfeld_smsc911x_config = {
+        .phy_interface  = PHY_INTERFACE_MODE_MII,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+        .flags          = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct platform_device smc91x_device = {
+        .name           = "smsc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc91x_resources),
+        .resource       = smc91x_resources,
+        .dev            = {
+                .platform_data = &raumfeld_smsc911x_config,
+        }
+};
+
+/**
+ * NAND
+ */
+
+static struct mtd_partition raumfeld_nand_partitions[] = {
+        {
+                .name           = "Bootloader",
+                .offset         = 0,
+                .size           = 0xa0000,
+                .mask_flags     = MTD_WRITEABLE, /* force read-only */
+        },
+        {
+                .name           = "BootloaderEnvironment",
+                .offset         = 0xa0000,
+                .size           = 0x20000,
+        },
+        {
+                .name           = "BootloaderSplashScreen",
+                .offset         = 0xc0000,
+                .size           = 0x60000,
+        },
+        {
+                .name           = "UBI",
+                .offset         = 0x120000,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
+        .enable_arbiter = 1,
+        .keep_config    = 1,
+        .parts          = raumfeld_nand_partitions,
+        .nr_parts       = ARRAY_SIZE(raumfeld_nand_partitions),
+};
+
+/**
+ * USB (OHCI) support
+ */
+
+static struct pxaohci_platform_data raumfeld_ohci_info = {
+        .port_mode      = PMM_GLOBAL_MODE,
+        .flags          = ENABLE_PORT1,
+};
+
+/**
+ * Rotary encoder input device
+ */
+
+static struct rotary_encoder_platform_data raumfeld_rotary_encoder_info = {
+        .steps          = 24,
+        .axis           = REL_X,
+        .relative_axis  = 1,
+        .gpio_a         = GPIO_VOLENC_A,
+        .gpio_b         = GPIO_VOLENC_B,
+        .inverted_a     = 1,
+        .inverted_b     = 0,
+};
+
+static struct platform_device rotary_encoder_device = {
+        .name           = "rotary-encoder",
+        .id             = 0,
+        .dev            = {
+                .platform_data = &raumfeld_rotary_encoder_info,
+        }
+};
+
+/**
+ * GPIO buttons
+ */
+
+static struct gpio_keys_button gpio_keys_button[] = {
+        {
+                .code                   = KEY_F1,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_KEY1,
+                .active_low             = 1,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "Button 1",
+        },
+        {
+                .code                   = KEY_F2,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_KEY2,
+                .active_low             = 1,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "Button 2",
+        },
+        {
+                .code                   = KEY_F3,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_KEY3,
+                .active_low             = 1,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "Button 3",
+        },
+        {
+                .code                   = KEY_F4,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_RESCUE_BOOT,
+                .active_low             = 0,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "rescue boot button",
+        },
+        {
+                .code                   = KEY_F5,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_DOCK_DETECT,
+                .active_low             = 1,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "dock detect",
+        },
+        {
+                .code                   = KEY_F6,
+                .type                   = EV_KEY,
+                .gpio                   = GPIO_ON_OFF,
+                .active_low             = 0,
+                .wakeup                 = 0,
+                .debounce_interval      = 5, /* ms */
+                .desc                   = "on/off button",
+        },
+};
+
+static struct gpio_keys_platform_data gpio_keys_platform_data = {
+        .buttons        = gpio_keys_button,
+        .nbuttons       = ARRAY_SIZE(gpio_keys_button),
+        .rep            = 0,
+};
+
+static struct platform_device raumfeld_gpio_keys_device = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &gpio_keys_platform_data,
+        }
+};
+
+/**
+ * GPIO LEDs
+ */
+
+static struct gpio_led raumfeld_leds[] = {
+        {
+                .name           = "raumfeld:1",
+                .gpio           = GPIO_LED1,
+                .active_low     = 1,
+                .default_state  = LEDS_GPIO_DEFSTATE_ON,
+        },
+        {
+                .name           = "raumfeld:2",
+                .gpio           = GPIO_LED2,
+                .active_low     = 0,
+                .default_state  = LEDS_GPIO_DEFSTATE_OFF,
+        }
+};
+
+static struct gpio_led_platform_data raumfeld_led_platform_data = {
+        .leds           = raumfeld_leds,
+        .num_leds       = ARRAY_SIZE(raumfeld_leds),
+};
+
+static struct platform_device raumfeld_led_device = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &raumfeld_led_platform_data,
+        },
+};
+
+/**
+ * One-wire (W1 bus) support
+ */
+
+static void w1_enable_external_pullup(int enable)
+{
+        gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
+        msleep(100);
+}
+
+static struct w1_gpio_platform_data w1_gpio_platform_data = {
+        .pin                    = GPIO_ONE_WIRE,
+        .is_open_drain          = 0,
+        .enable_external_pullup = w1_enable_external_pullup,
+};
+
+struct platform_device raumfeld_w1_gpio_device = {
+        .name   = "w1-gpio",
+        .dev    = {
+                .platform_data = &w1_gpio_platform_data
+        }
+};
+
+static void __init raumfeld_w1_init(void)
+{
+        int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
+                                "W1 external pullup enable");
+
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+        else
+                gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
+
+        platform_device_register(&raumfeld_w1_gpio_device);
+}
+
+/**
+ * Framebuffer device
+ */
+
+/* PWM controlled backlight */
+static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
+        .pwm_id         = 0,
+        .max_brightness = 100,
+        .dft_brightness = 100,
+        /* 10000 ns = 10 ms ^= 100 kHz */
+        .pwm_period_ns  = 10000,
+};
+
+static struct platform_device raumfeld_pwm_backlight_device = {
+        .name   = "pwm-backlight",
+        .dev    = {
+                .parent         = &pxa27x_device_pwm0.dev,
+                .platform_data  = &raumfeld_pwm_backlight_data,
+        }
+};
+
+/* LT3593 controlled backlight */
+static struct gpio_led raumfeld_lt3593_led = {
+        .name           = "backlight",
+        .gpio           = mfp_to_gpio(MFP_PIN_GPIO17),
+        .default_state  = LEDS_GPIO_DEFSTATE_ON,
+};
+
+static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
+        .leds           = &raumfeld_lt3593_led,
+        .num_leds       = 1,
+};
+
+static struct platform_device raumfeld_lt3593_device = {
+        .name   = "leds-lt3593",
+        .id     = -1,
+        .dev    = {
+                .platform_data = &raumfeld_lt3593_platform_data,
+        },
+};
+
+static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
+        .pixclock       = 111000,
+        .xres           = 480,
+        .yres           = 272,
+        .bpp            = 16,
+        .hsync_len      = 4,
+        .left_margin    = 2,
+        .right_margin   = 1,
+        .vsync_len      = 1,
+        .upper_margin   = 3,
+        .lower_margin   = 1,
+        .sync           = 0,
+};
+
+static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
+        .modes          = &sharp_lq043t3dx02_mode,
+        .num_modes      = 1,
+        .video_mem_size = 0x400000,
+        .lcd_conn       = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init raumfeld_lcd_init(void)
+{
+        int ret;
+
+        set_pxa_fb_info(&raumfeld_sharp_lcd_info);
+
+        /* Earlier devices had the backlight regulator controlled
+         * via PWM, later versions use another controller for that */
+        if ((system_rev & 0xff) < 2) {
+                mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
+                pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
+                platform_device_register(&raumfeld_pwm_backlight_device);
+        } else
+                platform_device_register(&raumfeld_lt3593_device);
+
+        ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+        else
+                gpio_direction_output(GPIO_TFT_VA_EN, 1);
+
+        ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+        else
+                gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+}
+
+/**
+ * SPI devices
+ */
+
+struct spi_gpio_platform_data raumfeld_spi_platform_data = {
+        .sck            = GPIO_SPI_CLK,
+        .mosi           = GPIO_SPI_MOSI,
+        .miso           = GPIO_SPI_MISO,
+        .num_chipselect = 3,
+};
+
+static struct platform_device raumfeld_spi_device = {
+        .name   = "spi_gpio",
+        .id     = 0,
+        .dev    = {
+                .platform_data  = &raumfeld_spi_platform_data,
+        }
+};
+
+static struct lis3lv02d_platform_data lis3_pdata = {
+        .click_flags    = LIS3_CLICK_SINGLE_X |
+                          LIS3_CLICK_SINGLE_Y |
+                          LIS3_CLICK_SINGLE_Z,
+        .irq_cfg        = LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
+        .wakeup_flags   = LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
+                          LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
+                          LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
+        .wakeup_thresh  = 10,
+        .click_thresh_x = 10,
+        .click_thresh_y = 10,
+        .click_thresh_z = 10,
+};
+
+#define SPI_AK4104      \
+{                       \
+        .modalias       = "ak4104",     \
+        .max_speed_hz   = 10000,        \
+        .bus_num        = 0,            \
+        .chip_select    = 0,            \
+        .controller_data = (void *) GPIO_SPDIF_CS,      \
+}
+
+#define SPI_LIS3        \
+{                       \
+        .modalias       = "lis3lv02d_spi",      \
+        .max_speed_hz   = 1000000,              \
+        .bus_num        = 0,                    \
+        .chip_select    = 1,                    \
+        .controller_data = (void *) GPIO_ACCEL_CS,      \
+        .platform_data  = &lis3_pdata,          \
+        .irq            = gpio_to_irq(GPIO_ACCEL_IRQ),  \
+}
+
+#define SPI_DAC7512     \
+{       \
+        .modalias       = "dac7512",            \
+        .max_speed_hz   = 1000000,              \
+        .bus_num        = 0,                    \
+        .chip_select    = 2,                    \
+        .controller_data = (void *) GPIO_MCLK_DAC_CS,   \
+}
+
+static struct spi_board_info connector_spi_devices[] __initdata = {
+        SPI_AK4104,
+        SPI_DAC7512,
+};
+
+static struct spi_board_info speaker_spi_devices[] __initdata = {
+        SPI_DAC7512,
+};
+
+static struct spi_board_info controller_spi_devices[] __initdata = {
+        SPI_LIS3,
+};
+
+/**
+ * MMC for Marvell Libertas 8688 via SDIO
+ */
+
+static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
+{
+        gpio_set_value(GPIO_W2W_RESET, 1);
+        gpio_set_value(GPIO_W2W_PDN, 1);
+
+        return 0;
+}
+
+static void raumfeld_mci_exit(struct device *dev, void *data)
+{
+        gpio_set_value(GPIO_W2W_RESET, 0);
+        gpio_set_value(GPIO_W2W_PDN, 0);
+}
+
+static struct pxamci_platform_data raumfeld_mci_platform_data = {
+        .init                   = raumfeld_mci_init,
+        .exit                   = raumfeld_mci_exit,
+        .detect_delay           = 20,
+        .gpio_card_detect       = -1,
+        .gpio_card_ro           = -1,
+        .gpio_power             = -1,
+};
+
+/*
+ * External power / charge logic
+ */
+
+static int power_supply_init(struct device *dev)
+{
+        return 0;
+}
+
+static void power_supply_exit(struct device *dev)
+{
+}
+
+static int raumfeld_is_ac_online(void)
+{
+        return !gpio_get_value(GPIO_CHARGE_DC_OK);
+}
+
+static int raumfeld_is_usb_online(void)
+{
+        return 0;
+}
+
+static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
+
+static struct pda_power_pdata power_supply_info = {
+        .init                   = power_supply_init,
+        .is_ac_online           = raumfeld_is_ac_online,
+        .is_usb_online          = raumfeld_is_usb_online,
+        .exit                   = power_supply_exit,
+        .supplied_to            = raumfeld_power_supplicants,
+        .num_supplicants        = ARRAY_SIZE(raumfeld_power_supplicants)
+};
+
+static struct resource power_supply_resources[] = {
+        {
+                .name  = "ac",
+                .flags = IORESOURCE_IRQ |
+                         IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
+                .start = GPIO_CHARGE_DC_OK,
+                .end   = GPIO_CHARGE_DC_OK,
+        },
+};
+
+static irqreturn_t charge_done_irq(int irq, void *dev_id)
+{
+        struct power_supply *psy;
+
+        psy = power_supply_get_by_name("ds2760-battery.0");
+
+        if (psy)
+                power_supply_set_battery_charged(psy);
+
+        return IRQ_HANDLED;
+}
+
+static struct platform_device raumfeld_power_supply = {
+        .name = "pda-power",
+        .id   = -1,
+        .dev  = {
+                .platform_data = &power_supply_info,
+        },
+        .resource      = power_supply_resources,
+        .num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+static void __init raumfeld_power_init(void)
+{
+        int ret;
+
+        /* Set PEN2 high to enable maximum charge current */
+        ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+        else
+                gpio_direction_output(GPIO_CHRG_PEN2, 1);
+
+        ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+
+        ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+        else
+                gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
+
+        power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
+        power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+
+        ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+                        &charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
+                        "charge_done", NULL);
+
+        if (ret < 0)
+                printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
+                        GPIO_CHARGE_DONE);
+        else
+                platform_device_register(&raumfeld_power_supply);
+}
+
+/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
+
+static struct regulator_consumer_supply audio_va_consumer_supply =
+        REGULATOR_SUPPLY("va", "0-0048");
+
+struct regulator_init_data audio_va_initdata = {
+        .consumer_supplies = &audio_va_consumer_supply,
+        .num_consumer_supplies = 1,
+        .constraints = {
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+        },
+};
+
+static struct fixed_voltage_config audio_va_config = {
+        .supply_name            = "audio_va",
+        .microvolts             = 5000000,
+        .gpio                   = GPIO_AUDIO_VA_ENABLE,
+        .enable_high            = 1,
+        .enabled_at_boot        = 0,
+        .init_data              = &audio_va_initdata,
+};
+
+static struct platform_device audio_va_device = {
+        .name   = "reg-fixed-voltage",
+        .id     = 0,
+        .dev    = {
+                .platform_data = &audio_va_config,
+        },
+};
+
+/* Dummy supplies for Codec's VD/VLC */
+
+static struct regulator_consumer_supply audio_dummy_supplies[] = {
+        REGULATOR_SUPPLY("vd", "0-0048"),
+        REGULATOR_SUPPLY("vlc", "0-0048"),
+};
+
+struct regulator_init_data audio_dummy_initdata = {
+        .consumer_supplies = audio_dummy_supplies,
+        .num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
+        .constraints = {
+                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+        },
+};
+
+static struct fixed_voltage_config audio_dummy_config = {
+        .supply_name            = "audio_vd",
+        .microvolts             = 3300000,
+        .gpio                   = -1,
+        .init_data              = &audio_dummy_initdata,
+};
+
+static struct platform_device audio_supply_dummy_device = {
+        .name   = "reg-fixed-voltage",
+        .id     = 1,
+        .dev    = {
+                .platform_data = &audio_dummy_config,
+        },
+};
+
+static struct platform_device *audio_regulator_devices[] = {
+        &audio_va_device,
+        &audio_supply_dummy_device,
+};
+
+/**
+ * Regulator support via MAX8660
+ */
+
+static struct regulator_consumer_supply vcc_mmc_supply =
+        REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
+
+static struct regulator_init_data vcc_mmc_init_data = {
+        .constraints = {
+                .min_uV                 = 3300000,
+                .max_uV                 = 3300000,
+                .valid_modes_mask       = REGULATOR_MODE_NORMAL,
+                .valid_ops_mask         = REGULATOR_CHANGE_STATUS |
+                                          REGULATOR_CHANGE_VOLTAGE |
+                                          REGULATOR_CHANGE_MODE,
+        },
+        .consumer_supplies = &vcc_mmc_supply,
+        .num_consumer_supplies = 1,
+};
+
+struct max8660_subdev_data max8660_v6_subdev_data = {
+        .id             = MAX8660_V6,
+        .name           = "vmmc",
+        .platform_data  = &vcc_mmc_init_data,
+};
+
+static struct max8660_platform_data max8660_pdata = {
+        .subdevs = &max8660_v6_subdev_data,
+        .num_subdevs = 1,
+};
+
+/**
+ * I2C devices
+ */
+
+static struct i2c_board_info raumfeld_pwri2c_board_info = {
+        .type           = "max8660",
+        .addr           = 0x34,
+        .platform_data  = &max8660_pdata,
+};
+
+static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
+        .type   = "cs4270",
+        .addr   = 0x48,
+};
+
+static struct eeti_ts_platform_data eeti_ts_pdata = {
+        .irq_active_high = 1,
+};
+
+static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
+        .type   = "eeti_ts",
+        .addr   = 0x0a,
+        .irq    = gpio_to_irq(GPIO_TOUCH_IRQ),
+        .platform_data = &eeti_ts_pdata,
+};
+
+static struct platform_device *raumfeld_common_devices[] = {
+        &raumfeld_gpio_keys_device,
+        &raumfeld_led_device,
+        &raumfeld_spi_device,
+};
+
+static void __init raumfeld_audio_init(void)
+{
+        int ret;
+
+        ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
+        if (ret < 0)
+                pr_warning("unable to request GPIO_CODEC_RESET\n");
+        else
+                gpio_direction_output(GPIO_CODEC_RESET, 1);
+
+        ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
+        if (ret < 0)
+                pr_warning("unable to request GPIO_SPDIF_RESET\n");
+        else
+                gpio_direction_output(GPIO_SPDIF_RESET, 1);
+
+        ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
+        if (ret < 0)
+                pr_warning("unable to request GPIO_MCLK_RESET\n");
+        else
+                gpio_direction_output(GPIO_MCLK_RESET, 1);
+
+        platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
+}
+
+static void __init raumfeld_common_init(void)
+{
+        int ret;
+
+        /* The on/off button polarity has changed after revision 1 */
+        if ((system_rev & 0xff) > 1) {
+                int i;
+
+                for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
+                        if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+                                gpio_keys_button[i].active_low = 1;
+        }
+
+        enable_irq_wake(IRQ_WAKEUP0);
+
+        pxa3xx_set_nand_info(&raumfeld_nand_info);
+        pxa3xx_set_i2c_power_info(NULL);
+        pxa_set_ohci_info(&raumfeld_ohci_info);
+        pxa_set_mci_info(&raumfeld_mci_platform_data);
+        pxa_set_i2c_info(NULL);
+        pxa_set_ffuart_info(NULL);
+
+        ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_W2W_RESET\n");
+        else
+                gpio_direction_output(GPIO_W2W_RESET, 0);
+
+        ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_W2W_PDN\n");
+        else
+                gpio_direction_output(GPIO_W2W_PDN, 0);
+
+        /* this can be used to switch off the device */
+        ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
+                                "supply shutdown");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+        else
+                gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
+
+        platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
+        i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
+}
+
+static void __init raumfeld_controller_init(void)
+{
+        int ret;
+
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
+        platform_device_register(&rotary_encoder_device);
+        spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
+        i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
+
+        ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
+        if (ret < 0)
+                pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+        else
+                gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
+
+        raumfeld_common_init();
+        raumfeld_power_init();
+        raumfeld_lcd_init();
+        raumfeld_w1_init();
+}
+
+static void __init raumfeld_connector_init(void)
+{
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
+        spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
+        i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+        platform_device_register(&smc91x_device);
+
+        raumfeld_audio_init();
+        raumfeld_common_init();
+}
+
+static void __init raumfeld_speaker_init(void)
+{
+        pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
+        spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
+        i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
+
+        platform_device_register(&smc91x_device);
+        platform_device_register(&rotary_encoder_device);
+
+        raumfeld_audio_init();
+        raumfeld_common_init();
+}
+
+/* physical memory regions */
+#define RAUMFELD_SDRAM_BASE     0xa0000000      /* SDRAM region */
+
+#ifdef CONFIG_MACH_RAUMFELD_RC
+MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .init_machine   = raumfeld_controller_init,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
+MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .init_machine   = raumfeld_connector_init,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
+MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = RAUMFELD_SDRAM_BASE + 0x100,
+        .init_machine   = raumfeld_speaker_init,
+        .map_io         = pxa_map_io,
+        .init_irq       = pxa3xx_init_irq,
+        .timer          = &pxa_timer,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 28352c0b8c3..19b5109d980 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -56,25 +56,7 @@ static unsigned long spitz_pin_config[] __initdata = {
         GPIO80_nCS_4,   /* SCOOP #1 */
 
         /* LCD - 16bpp Active TFT */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* PC Card */
         GPIO48_nPOE,
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 9ebe658590f..a81d6dbf662 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -35,6 +35,8 @@
 #include <mach/ssp.h>
 #include <mach/regs-ssp.h>
 
+#ifdef CONFIG_PXA_SSP_LEGACY
+
 #define TIMEOUT 100000
 
 static irqreturn_t ssp_interrupt(int irq, void *dev_id)
@@ -303,6 +305,7 @@ void ssp_exit(struct ssp_dev *dev)
         clk_disable(ssp->clk);
         ssp_free(ssp);
 }
+#endif /* CONFIG_PXA_SSP_LEGACY */
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
@@ -488,6 +491,7 @@ static void __exit pxa_ssp_exit(void)
 arch_initcall(pxa_ssp_init);
 module_exit(pxa_ssp_exit);
 
+#ifdef CONFIG_PXA_SSP_LEGACY
 EXPORT_SYMBOL(ssp_write_word);
 EXPORT_SYMBOL(ssp_read_word);
 EXPORT_SYMBOL(ssp_flush);
@@ -498,6 +502,7 @@ EXPORT_SYMBOL(ssp_restore_state);
 EXPORT_SYMBOL(ssp_init);
 EXPORT_SYMBOL(ssp_exit);
 EXPORT_SYMBOL(ssp_config);
+#endif
 
 MODULE_DESCRIPTION("PXA SSP driver");
 MODULE_AUTHOR("Liam Girdwood");
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 750c448db67..293e40aeaf2 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -76,14 +76,12 @@ pxa_ost0_interrupt(int irq, void *dev_id)
 static int
 pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 {
-        unsigned long flags, next, oscr;
+        unsigned long next, oscr;
 
-        raw_local_irq_save(flags);
         OIER |= OIER_E0;
         next = OSCR + delta;
         OSMR0 = next;
         oscr = OSCR;
-        raw_local_irq_restore(flags);
 
         return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -91,23 +89,17 @@ pxa_osmr0_set_next_event(unsigned long delta, struct clock_event_device *dev)
 static void
 pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
-        unsigned long irqflags;
-
         switch (mode) {
         case CLOCK_EVT_MODE_ONESHOT:
-                raw_local_irq_save(irqflags);
                 OIER &= ~OIER_E0;
                 OSSR = OSSR_M0;
-                raw_local_irq_restore(irqflags);
                 break;
 
         case CLOCK_EVT_MODE_UNUSED:
         case CLOCK_EVT_MODE_SHUTDOWN:
                 /* initializing, released, or preparing for suspend */
-                raw_local_irq_save(irqflags);
                 OIER &= ~OIER_E0;
                 OSSR = OSSR_M0;
-                raw_local_irq_restore(irqflags);
                 break;
 
         case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c854c168a45..ad552791c4c 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/spi/spi.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -131,24 +132,24 @@ static unsigned long tosa_pin_config[] = {
         GPIO45_BTUART_RTS,
 
         /* Keybd */
-        GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
-        GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
+        GPIO58_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 0 */
+        GPIO59_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 1 */
+        GPIO60_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 2 */
+        GPIO61_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 3 */
+        GPIO62_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 4 */
+        GPIO63_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 5 */
+        GPIO64_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 6 */
+        GPIO65_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 7 */
+        GPIO66_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 8 */
+        GPIO67_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 9 */
+        GPIO68_GPIO | MFP_LPM_DRIVE_LOW,        /* Column 10 */
+        GPIO69_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 0 */
+        GPIO70_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 1 */
+        GPIO71_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 2 */
+        GPIO72_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 3 */
+        GPIO73_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 4 */
+        GPIO74_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 5 */
+        GPIO75_GPIO | MFP_LPM_DRIVE_LOW,        /* Row 6 */
 
         /* SPI */
         GPIO81_SSP2_CLK_OUT,
@@ -411,9 +412,87 @@ static struct platform_device tosa_power_device = {
 /*
  * Tosa Keyboard
  */
+static const uint32_t tosakbd_keymap[] = {
+        KEY(0, 2, KEY_W),
+        KEY(0, 6, KEY_K),
+        KEY(0, 7, KEY_BACKSPACE),
+        KEY(0, 8, KEY_P),
+        KEY(1, 1, KEY_Q),
+        KEY(1, 2, KEY_E),
+        KEY(1, 3, KEY_T),
+        KEY(1, 4, KEY_Y),
+        KEY(1, 6, KEY_O),
+        KEY(1, 7, KEY_I),
+        KEY(1, 8, KEY_COMMA),
+        KEY(2, 1, KEY_A),
+        KEY(2, 2, KEY_D),
+        KEY(2, 3, KEY_G),
+        KEY(2, 4, KEY_U),
+        KEY(2, 6, KEY_L),
+        KEY(2, 7, KEY_ENTER),
+        KEY(2, 8, KEY_DOT),
+        KEY(3, 1, KEY_Z),
+        KEY(3, 2, KEY_C),
+        KEY(3, 3, KEY_V),
+        KEY(3, 4, KEY_J),
+        KEY(3, 5, TOSA_KEY_ADDRESSBOOK),
+        KEY(3, 6, TOSA_KEY_CANCEL),
+        KEY(3, 7, TOSA_KEY_CENTER),
+        KEY(3, 8, TOSA_KEY_OK),
+        KEY(3, 9, KEY_LEFTSHIFT),
+        KEY(4, 1, KEY_S),
+        KEY(4, 2, KEY_R),
+        KEY(4, 3, KEY_B),
+        KEY(4, 4, KEY_N),
+        KEY(4, 5, TOSA_KEY_CALENDAR),
+        KEY(4, 6, TOSA_KEY_HOMEPAGE),
+        KEY(4, 7, KEY_LEFTCTRL),
+        KEY(4, 8, TOSA_KEY_LIGHT),
+        KEY(4, 10, KEY_RIGHTSHIFT),
+        KEY(5, 1, KEY_TAB),
+        KEY(5, 2, KEY_SLASH),
+        KEY(5, 3, KEY_H),
+        KEY(5, 4, KEY_M),
+        KEY(5, 5, TOSA_KEY_MENU),
+        KEY(5, 7, KEY_UP),
+        KEY(5, 11, TOSA_KEY_FN),
+        KEY(6, 1, KEY_X),
+        KEY(6, 2, KEY_F),
+        KEY(6, 3, KEY_SPACE),
+        KEY(6, 4, KEY_APOSTROPHE),
+        KEY(6, 5, TOSA_KEY_MAIL),
+        KEY(6, 6, KEY_LEFT),
+        KEY(6, 7, KEY_DOWN),
+        KEY(6, 8, KEY_RIGHT),
+};
+
+static struct matrix_keymap_data tosakbd_keymap_data = {
+        .keymap         = tosakbd_keymap,
+        .keymap_size    = ARRAY_SIZE(tosakbd_keymap),
+};
+
+static const int tosakbd_col_gpios[] =
+                        { 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
+static const int tosakbd_row_gpios[] =
+                        { 69, 70, 71, 72, 73, 74, 75 };
+
+static struct matrix_keypad_platform_data tosakbd_pdata = {
+        .keymap_data            = &tosakbd_keymap_data,
+        .row_gpios              = tosakbd_row_gpios,
+        .col_gpios              = tosakbd_col_gpios,
+        .num_row_gpios          = ARRAY_SIZE(tosakbd_row_gpios),
+        .num_col_gpios          = ARRAY_SIZE(tosakbd_col_gpios),
+        .col_scan_delay_us      = 10,
+        .debounce_ms            = 10,
+        .wakeup                 = 1,
+};
+
 static struct platform_device tosakbd_device = {
-        .name           = "tosa-keyboard",
+        .name           = "matrix-keypad",
         .id             = -1,
+        .dev            = {
+                .platform_data = &tosakbd_pdata,
+        },
 };
 
 static struct gpio_keys_button tosa_gpio_keys[] = {
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 0aa858ebc57..797f2544d0c 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -72,27 +72,14 @@ static unsigned long trizeps4_pin_config[] __initdata = {
         GPIO79_nCS_3,           /* Logic CS */
         GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,       /* Logic irq */
 
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         /* LCD - 16bpp Active TFT */
-        GPIO58_LCD_LDD_0,
-        GPIO59_LCD_LDD_1,
-        GPIO60_LCD_LDD_2,
-        GPIO61_LCD_LDD_3,
-        GPIO62_LCD_LDD_4,
-        GPIO63_LCD_LDD_5,
-        GPIO64_LCD_LDD_6,
-        GPIO65_LCD_LDD_7,
-        GPIO66_LCD_LDD_8,
-        GPIO67_LCD_LDD_9,
-        GPIO68_LCD_LDD_10,
-        GPIO69_LCD_LDD_11,
-        GPIO70_LCD_LDD_12,
-        GPIO71_LCD_LDD_13,
-        GPIO72_LCD_LDD_14,
-        GPIO73_LCD_LDD_15,
-        GPIO74_LCD_FCLK,
-        GPIO75_LCD_LCLK,
-        GPIO76_LCD_PCLK,
-        GPIO77_LCD_BIAS,
+        GPIOxx_LCD_TFT_16BPP,
 
         /* UART */
         GPIO9_FFUART_CTS,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 89f258c9e12..1dd13346f97 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -281,7 +281,7 @@ static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
         do {
                 /* we're in a chained irq handler,
                  * so ack the interrupt by hand */
-                GEDR(VIPER_CPLD_GPIO) = GPIO_bit(VIPER_CPLD_GPIO);
+                desc->chip->ack(irq);
 
                 if (likely(pending)) {
                         irq = viper_bit_to_irq(__ffs(pending));
@@ -711,6 +711,12 @@ static mfp_cfg_t viper_pin_config[] __initdata = {
         GPIO80_nCS_4,
         GPIO33_nCS_5,
 
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         /* FP Backlight */
         GPIO9_GPIO,                             /* VIPER_BCKLIGHT_EN_GPIO */
         GPIO10_GPIO,                            /* VIPER_LCD_EN_GPIO */
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 75f2a37f945..39896d88358 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 #include <linux/apm-emulation.h>
+#include <linux/can/platform/mcp251x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -387,11 +388,47 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
         .enable_dma     = 1,
 };
 
-static struct platform_device pxa2xx_spi_ssp3_device = {
-        .name = "pxa2xx-spi",
-        .id = 3,
-        .dev = {
-                .platform_data = &pxa2xx_spi_ssp3_master_info,
+/* CAN bus on SPI */
+static int zeus_mcp2515_setup(struct spi_device *sdev)
+{
+        int err;
+
+        err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown");
+        if (err)
+                return err;
+
+        err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1);
+        if (err) {
+                gpio_free(ZEUS_CAN_SHDN_GPIO);
+                return err;
+        }
+
+        return 0;
+}
+
+static int zeus_mcp2515_transceiver_enable(int enable)
+{
+        gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable);
+        return 0;
+}
+
+static struct mcp251x_platform_data zeus_mcp2515_pdata = {
+        .oscillator_frequency   = 16*1000*1000,
+        .model                  = CAN_MCP251X_MCP2515,
+        .board_specific_setup   = zeus_mcp2515_setup,
+        .transceiver_enable     = zeus_mcp2515_transceiver_enable,
+        .power_enable           = zeus_mcp2515_transceiver_enable,
+};
+
+static struct spi_board_info zeus_spi_board_info[] = {
+        [0] = {
+                .modalias       = "mcp251x",
+                .platform_data  = &zeus_mcp2515_pdata,
+                .irq            = gpio_to_irq(ZEUS_CAN_GPIO),
+                .max_speed_hz   = 1*1000*1000,
+                .bus_num        = 3,
+                .mode           = SPI_MODE_0,
+                .chip_select    = 0,
         },
 };
 
@@ -457,15 +494,28 @@ static struct platform_device zeus_pcmcia_device = {
         },
 };
 
+static struct resource zeus_max6369_resource = {
+        .start          = ZEUS_CPLD_EXTWDOG_PHYS,
+        .end            = ZEUS_CPLD_EXTWDOG_PHYS,
+        .flags          = IORESOURCE_MEM,
+};
+
+struct platform_device zeus_max6369_device = {
+        .name           = "max6369_wdt",
+        .id             = -1,
+        .resource       = &zeus_max6369_resource,
+        .num_resources  = 1,
+};
+
 static struct platform_device *zeus_devices[] __initdata = {
         &zeus_serial_device,
         &zeus_mtd_devices[0],
         &zeus_dm9k0_device,
         &zeus_dm9k1_device,
         &zeus_sram_device,
-        &pxa2xx_spi_ssp3_device,
         &zeus_leds_device,
         &zeus_pcmcia_device,
+        &zeus_max6369_device,
 };
 
 /* AC'97 */
@@ -509,7 +559,9 @@ static void zeus_ohci_exit(struct device *dev)
 
 static struct pxaohci_platform_data zeus_ohci_platform_data = {
         .port_mode      = PMM_NPS_MODE,
-        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+        /* Clear Power Control Polarity Low and set Power Sense
+         * Polarity Low. Supply power to USB ports. */
+        .flags          = ENABLE_PORT_ALL | POWER_SENSE_LOW,
         .init           = zeus_ohci_init,
         .exit           = zeus_ohci_exit,
 };
@@ -621,11 +673,15 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = {
         .udc_command = zeus_udc_command,
 };
 
+#ifdef CONFIG_PM
 static void zeus_power_off(void)
 {
         local_irq_disable();
         pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
+#else
+#define zeus_power_off   NULL
+#endif
 
 #ifdef CONFIG_APM_EMULATION
 static void zeus_get_power_status(struct apm_power_info *info)
@@ -706,6 +762,12 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
 };
 
 static mfp_cfg_t zeus_pin_config[] __initdata = {
+        /* AC97 */
+        GPIO28_AC97_BITCLK,
+        GPIO29_AC97_SDATA_IN_0,
+        GPIO30_AC97_SDATA_OUT,
+        GPIO31_AC97_SYNC,
+
         GPIO15_nCS_1,
         GPIO78_nCS_2,
         GPIO80_nCS_4,
@@ -731,6 +793,11 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
         GPIO104_CIF_DD_2,
         GPIO105_CIF_DD_1,
 
+        GPIO81_SSP3_TXD,
+        GPIO82_SSP3_RXD,
+        GPIO83_SSP3_SFRM,
+        GPIO84_SSP3_SCLK,
+
         GPIO48_nPOE,
         GPIO49_nPWE,
         GPIO50_nPIOR,
@@ -785,6 +852,8 @@ static void __init zeus_init(void)
         pxa_set_ac97_info(&zeus_ac97_info);
         pxa_set_i2c_info(NULL);
         i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+        pxa2xx_set_spi_info(3, &pxa2xx_spi_ssp3_master_info);
+        spi_register_board_info(zeus_spi_board_info, ARRAY_SIZE(zeus_spi_board_info));
 }
 
 static struct map_desc zeus_io_desc[] __initdata = {
@@ -807,12 +876,6 @@ static struct map_desc zeus_io_desc[] __initdata = {
                 .type    = MT_DEVICE,
         },
         {
-                .virtual = ZEUS_CPLD_EXTWDOG,
-                .pfn     = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
-                .length  = 0x1000,
-                .type    = MT_DEVICE,
-        },
-        {
                 .virtual = ZEUS_PC104IO,
                 .pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
                 .length  = 0x00800000,
@@ -837,7 +900,7 @@ static void __init zeus_map_io(void)
         PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
 }
 
-MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
         /* Maintainer: Marc Zyngier <maz@misterjones.org> */
         .phys_io        = 0x40000000,
         .io_pg_offst    = ((io_p2v(0x40000000) >> 18) & 0xfffc),
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b395f7..d94857eb069 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -334,8 +334,8 @@ static void realview_pbx_reset(char mode)
          * in the system FPGA
          */
         __raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-        __raw_writel(0x0000, reset_ctrl);
-        __raw_writel(0x0004, reset_ctrl);
+        __raw_writel(0x00F0, reset_ctrl);
+        __raw_writel(0x00F4, reset_ctrl);
 }
 
 static void __init realview_pbx_init(void)
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index a6d91c39f22..187441a78dd 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -82,7 +82,7 @@ static int hmt_bl_init(struct device *dev)
         return ret;
 }
 
-static int hmt_bl_notify(int brightness)
+static int hmt_bl_notify(struct device *dev, int brightness)
 {
         /*
          * translate from CIELUV/CIELAB L*->brightness, E.G. from
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 051ec0f0023..259cb2c15ff 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -51,6 +51,10 @@ static struct resource sa1111_resources[] = {
         },
 };
 
+static struct sa1111_platform_data sa1111_info = {
+        .irq_base       = IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -59,6 +63,7 @@ static struct platform_device sa1111_device = {
         .dev            = {
                 .dma_mask = &sa1111_dmamask,
                 .coherent_dma_mask = 0xffffffff,
+                .platform_data = &sa1111_info,
         },
         .num_resources  = ARRAY_SIZE(sa1111_resources),
         .resource       = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 9982c5c28ed..5d5f330c5d9 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -234,6 +234,10 @@ static struct resource locomo_resources[] = {
         },
 };
 
+static struct locomo_platform_data locomo_info = {
+        .irq_base       = IRQ_BOARD_START,
+};
+
 struct platform_device collie_locomo_device = {
         .name           = "locomo",
         .id             = 0,
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 71a0b3fdcc8..52acda7061b 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -72,13 +72,6 @@
 #define COLLIE_IRQ_GPIO_GA_INT          IRQ_GPIO25
 #define COLLIE_IRQ_GPIO_MAIN_BAT_LOW    IRQ_GPIO26
 
-#define COLLIE_LCM_IRQ_GPIO_RTS         IRQ_LOCOMO_GPIO0
-#define COLLIE_LCM_IRQ_GPIO_CTS         IRQ_LOCOMO_GPIO1
-#define COLLIE_LCM_IRQ_GPIO_DSR         IRQ_LOCOMO_GPIO2
-#define COLLIE_LCM_IRQ_GPIO_DTR         IRQ_LOCOMO_GPIO3
-#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT  IRQ_LOCOMO_GPIO13
-#define COLLIE_LCM_IRQ_GPIO_nSD_WP      IRQ_LOCOMO_GPIO14
-
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
 #define COLLIE_TC35143_GPIO_BASE        (GPIO_MAX + 13)
 #define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
index ae81f80b0cf..8c8845b5ae5 100644
--- a/arch/arm/mach-sa1100/include/mach/irqs.h
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -68,93 +68,17 @@
 #define IRQ_BOARD_START         49
 #define IRQ_BOARD_END           65
 
-#define IRQ_SA1111_START        (IRQ_BOARD_END)
-#define IRQ_GPAIN0              (IRQ_BOARD_END + 0)
-#define IRQ_GPAIN1              (IRQ_BOARD_END + 1)
-#define IRQ_GPAIN2              (IRQ_BOARD_END + 2)
-#define IRQ_GPAIN3              (IRQ_BOARD_END + 3)
-#define IRQ_GPBIN0              (IRQ_BOARD_END + 4)
-#define IRQ_GPBIN1              (IRQ_BOARD_END + 5)
-#define IRQ_GPBIN2              (IRQ_BOARD_END + 6)
-#define IRQ_GPBIN3              (IRQ_BOARD_END + 7)
-#define IRQ_GPBIN4              (IRQ_BOARD_END + 8)
-#define IRQ_GPBIN5              (IRQ_BOARD_END + 9)
-#define IRQ_GPCIN0              (IRQ_BOARD_END + 10)
-#define IRQ_GPCIN1              (IRQ_BOARD_END + 11)
-#define IRQ_GPCIN2              (IRQ_BOARD_END + 12)
-#define IRQ_GPCIN3              (IRQ_BOARD_END + 13)
-#define IRQ_GPCIN4              (IRQ_BOARD_END + 14)
-#define IRQ_GPCIN5              (IRQ_BOARD_END + 15)
-#define IRQ_GPCIN6              (IRQ_BOARD_END + 16)
-#define IRQ_GPCIN7              (IRQ_BOARD_END + 17)
-#define IRQ_MSTXINT             (IRQ_BOARD_END + 18)
-#define IRQ_MSRXINT             (IRQ_BOARD_END + 19)
-#define IRQ_MSSTOPERRINT        (IRQ_BOARD_END + 20)
-#define IRQ_TPTXINT             (IRQ_BOARD_END + 21)
-#define IRQ_TPRXINT             (IRQ_BOARD_END + 22)
-#define IRQ_TPSTOPERRINT        (IRQ_BOARD_END + 23)
-#define SSPXMTINT               (IRQ_BOARD_END + 24)
-#define SSPRCVINT               (IRQ_BOARD_END + 25)
-#define SSPROR                  (IRQ_BOARD_END + 26)
-#define AUDXMTDMADONEA          (IRQ_BOARD_END + 32)
-#define AUDRCVDMADONEA          (IRQ_BOARD_END + 33)
-#define AUDXMTDMADONEB          (IRQ_BOARD_END + 34)
-#define AUDRCVDMADONEB          (IRQ_BOARD_END + 35)
-#define AUDTFSR                 (IRQ_BOARD_END + 36)
-#define AUDRFSR                 (IRQ_BOARD_END + 37)
-#define AUDTUR                  (IRQ_BOARD_END + 38)
-#define AUDROR                  (IRQ_BOARD_END + 39)
-#define AUDDTS                  (IRQ_BOARD_END + 40)
-#define AUDRDD                  (IRQ_BOARD_END + 41)
-#define AUDSTO                  (IRQ_BOARD_END + 42)
-#define IRQ_USBPWR              (IRQ_BOARD_END + 43)
-#define IRQ_HCIM                (IRQ_BOARD_END + 44)
-#define IRQ_HCIBUFFACC          (IRQ_BOARD_END + 45)
-#define IRQ_HCIRMTWKP           (IRQ_BOARD_END + 46)
-#define IRQ_NHCIMFCIR           (IRQ_BOARD_END + 47)
-#define IRQ_USB_PORT_RESUME     (IRQ_BOARD_END + 48)
-#define IRQ_S0_READY_NINT       (IRQ_BOARD_END + 49)
-#define IRQ_S1_READY_NINT       (IRQ_BOARD_END + 50)
-#define IRQ_S0_CD_VALID         (IRQ_BOARD_END + 51)
-#define IRQ_S1_CD_VALID         (IRQ_BOARD_END + 52)
-#define IRQ_S0_BVD1_STSCHG      (IRQ_BOARD_END + 53)
-#define IRQ_S1_BVD1_STSCHG      (IRQ_BOARD_END + 54)
-
-#define IRQ_LOCOMO_START        (IRQ_BOARD_END)
-#define IRQ_LOCOMO_KEY          (IRQ_BOARD_END + 0)
-#define IRQ_LOCOMO_GPIO0        (IRQ_BOARD_END + 1)
-#define IRQ_LOCOMO_GPIO1        (IRQ_BOARD_END + 2)
-#define IRQ_LOCOMO_GPIO2        (IRQ_BOARD_END + 3)
-#define IRQ_LOCOMO_GPIO3        (IRQ_BOARD_END + 4)
-#define IRQ_LOCOMO_GPIO4        (IRQ_BOARD_END + 5)
-#define IRQ_LOCOMO_GPIO5        (IRQ_BOARD_END + 6)
-#define IRQ_LOCOMO_GPIO6        (IRQ_BOARD_END + 7)
-#define IRQ_LOCOMO_GPIO7        (IRQ_BOARD_END + 8)
-#define IRQ_LOCOMO_GPIO8        (IRQ_BOARD_END + 9)
-#define IRQ_LOCOMO_GPIO9        (IRQ_BOARD_END + 10)
-#define IRQ_LOCOMO_GPIO10       (IRQ_BOARD_END + 11)
-#define IRQ_LOCOMO_GPIO11       (IRQ_BOARD_END + 12)
-#define IRQ_LOCOMO_GPIO12       (IRQ_BOARD_END + 13)
-#define IRQ_LOCOMO_GPIO13       (IRQ_BOARD_END + 14)
-#define IRQ_LOCOMO_GPIO14       (IRQ_BOARD_END + 15)
-#define IRQ_LOCOMO_GPIO15       (IRQ_BOARD_END + 16)
-#define IRQ_LOCOMO_LT           (IRQ_BOARD_END + 17)
-#define IRQ_LOCOMO_SPI_RFR      (IRQ_BOARD_END + 18)
-#define IRQ_LOCOMO_SPI_RFW      (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_REND     (IRQ_BOARD_END + 20)
-#define IRQ_LOCOMO_SPI_TEND     (IRQ_BOARD_END + 21)
-
 /*
  * Figure out the MAX IRQ number.
  *
  * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
- * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * If we have an LoCoMo, the max IRQ is IRQ_BOARD_START + 4
  * Otherwise, we have the standard IRQs only.
  */
 #ifdef CONFIG_SA1111
-#define NR_IRQS                 (IRQ_S1_BVD1_STSCHG + 1)
-#elif defined(CONFIG_SHARP_LOCOMO)
-#define NR_IRQS                 (IRQ_LOCOMO_SPI_TEND + 1)
+#define NR_IRQS                 (IRQ_BOARD_END + 55)
+#elif defined(CONFIG_SHARPSL_LOCOMO)
+#define NR_IRQS                 (IRQ_BOARD_START + 4)
 #else
 #define NR_IRQS                 (IRQ_BOARD_START)
 #endif
@@ -166,10 +90,3 @@
 #define IRQ_NEPONSET_SMC9196    (IRQ_BOARD_START + 0)
 #define IRQ_NEPONSET_USAR       (IRQ_BOARD_START + 1)
 #define IRQ_NEPONSET_SA1111     (IRQ_BOARD_START + 2)
-
-/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
-#define IRQ_LOCOMO_KEY_BASE     (IRQ_BOARD_START + 0)
-#define IRQ_LOCOMO_GPIO_BASE    (IRQ_BOARD_START + 1)
-#define IRQ_LOCOMO_LT_BASE      (IRQ_BOARD_START + 2)
-#define IRQ_LOCOMO_SPI_BASE     (IRQ_BOARD_START + 3)
-
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 13ebd2d99bf..d3ec620618f 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -208,6 +208,10 @@ static struct resource sa1111_resources[] = {
         },
 };
 
+static struct sa1111_platform_data sa1111_info = {
+        .irq_base       = IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -216,6 +220,7 @@ static struct platform_device sa1111_device = {
         .dev            = {
                 .dma_mask = &sa1111_dmamask,
                 .coherent_dma_mask = 0xffffffff,
+                .platform_data = &sa1111_info,
         },
         .num_resources  = ARRAY_SIZE(sa1111_resources),
         .resource       = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6ccd175bc4c..0b505d9f22d 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -241,6 +241,10 @@ static struct resource sa1111_resources[] = {
         },
 };
 
+static struct sa1111_platform_data sa1111_info = {
+        .irq_base       = IRQ_BOARD_END,
+};
+
 static u64 sa1111_dmamask = 0xffffffffUL;
 
 static struct platform_device sa1111_device = {
@@ -249,6 +253,7 @@ static struct platform_device sa1111_device = {
         .dev            = {
                 .dma_mask = &sa1111_dmamask,
                 .coherent_dma_mask = 0xffffffff,
+                .platform_data = &sa1111_info,
         },
         .num_resources  = ARRAY_SIZE(sa1111_resources),
         .resource       = sa1111_resources,
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index b9cbb56d6e9..74b6e0e570b 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -35,14 +35,12 @@ static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
 static int
 sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 {
-        unsigned long flags, next, oscr;
+        unsigned long next, oscr;
 
-        raw_local_irq_save(flags);
         OIER |= OIER_E0;
         next = OSCR + delta;
         OSMR0 = next;
         oscr = OSCR;
-        raw_local_irq_restore(flags);
 
         return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
 }
@@ -50,16 +48,12 @@ sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 static void
 sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
 {
-        unsigned long flags;
-
         switch (mode) {
         case CLOCK_EVT_MODE_ONESHOT:
         case CLOCK_EVT_MODE_UNUSED:
         case CLOCK_EVT_MODE_SHUTDOWN:
-                raw_local_irq_save(flags);
                 OIER &= ~OIER_E0;
                 OSSR = OSSR_M0;
-                raw_local_irq_restore(flags);
                 break;
 
         case CLOCK_EVT_MODE_RESUME:
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
new file mode 100644
index 00000000000..aeceb9b92ae
--- /dev/null
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -0,0 +1,84 @@
+if ARCH_SHMOBILE
+
+comment "SH-Mobile System Type"
+
+config ARCH_SH7367
+        bool "SH-Mobile G3 (SH7367)"
+        select CPU_V6
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7377
+        bool "SH-Mobile G4 (SH7377)"
+        select CPU_V7
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+
+config ARCH_SH7372
+        bool "SH-Mobile AP4 (SH7372)"
+        select CPU_V7
+        select HAVE_CLK
+        select COMMON_CLKDEV
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+
+comment "SH-Mobile Board Type"
+
+config MACH_G3EVM
+        bool "G3EVM board"
+        depends on ARCH_SH7367
+        select ARCH_REQUIRE_GPIOLIB
+
+config MACH_G4EVM
+        bool "G4EVM board"
+        depends on ARCH_SH7377
+        select ARCH_REQUIRE_GPIOLIB
+
+config MACH_AP4EVB
+        bool "AP4EVB board"
+        depends on ARCH_SH7372
+        select ARCH_REQUIRE_GPIOLIB
+
+comment "SH-Mobile System Configuration"
+
+menu "Memory configuration"
+
+config MEMORY_START
+        hex "Physical memory start address"
+        default "0x50000000" if MACH_G3EVM
+        default "0x40000000" if MACH_G4EVM
+        default "0x40000000" if MACH_AP4EVB
+        default "0x00000000"
+        ---help---
+          Tweak this only when porting to a new machine which does not
+          already have a defconfig. Changing it from the known correct
+          value on any of the known systems will only lead to disaster.
+
+config MEMORY_SIZE
+        hex "Physical memory size"
+        default "0x08000000" if MACH_G3EVM
+        default "0x08000000" if MACH_G4EVM
+        default "0x10000000" if MACH_AP4EVB
+        default "0x04000000"
+        help
+          This sets the default memory size assumed by your kernel. It can
+          be overridden as normal by the 'mem=' argument on the kernel command
+          line.
+
+endmenu
+
+menu "Timer and clock configuration"
+
+config SH_TIMER_CMT
+        bool "CMT timer driver"
+        default y
+        help
+          This enables build of the CMT timer driver.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
new file mode 100644
index 00000000000..6d385d371c3
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile
@@ -0,0 +1,22 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common objects
+obj-y                           := timer.o console.o
+
+# CPU objects
+obj-$(CONFIG_ARCH_SH7367)       += setup-sh7367.o clock-sh7367.o intc-sh7367.o
+obj-$(CONFIG_ARCH_SH7377)       += setup-sh7377.o clock-sh7367.o intc-sh7377.o
+obj-$(CONFIG_ARCH_SH7372)       += setup-sh7372.o clock-sh7367.o intc-sh7372.o
+
+# Pinmux setup
+pfc-$(CONFIG_ARCH_SH7367)       := pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377)       := pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372)       := pfc-sh7372.o
+obj-$(CONFIG_GENERIC_GPIO)      += $(pfc-y)
+
+# Board objects
+obj-$(CONFIG_MACH_G3EVM)        += board-g3evm.o
+obj-$(CONFIG_MACH_G4EVM)        += board-g4evm.o
+obj-$(CONFIG_MACH_AP4EVB)       += board-ap4evb.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
new file mode 100644
index 00000000000..1c08ee9de86
--- /dev/null
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -0,0 +1,9 @@
+__ZRELADDR      := $(shell /bin/bash -c 'printf "0x%08x" \
+                     $$[$(CONFIG_MEMORY_START) + 0x8000]')
+
+   zreladdr-y   := $(__ZRELADDR)
+
+# Unsupported legacy stuff
+#
+#params_phys-y (Instead: Pass atags pointer in r2)
+#initrd_phys-y (Instead: Use compiled-in initramfs)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
new file mode 100644
index 00000000000..a0463d92644
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -0,0 +1,301 @@
+/*
+ * AP4EVB board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <mach/common.h>
+#include <mach/sh7372.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+/*
+ * Address      Interface               BusWidth        note
+ * ------------------------------------------------------------------
+ * 0x0000_0000  NOR Flash ROM (MCP)     16bit           SW7 : bit1 = ON
+ * 0x0800_0000  user area               -
+ * 0x1000_0000  NOR Flash ROM (MCP)     16bit           SW7 : bit1 = OFF
+ * 0x1400_0000  Ether (LAN9220)         16bit
+ * 0x1600_0000  user area               -               cannot use with NAND
+ * 0x1800_0000  user area               -
+ * 0x1A00_0000  -
+ * 0x4000_0000  LPDDR2-SDRAM (POP)      32bit
+ */
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1         SMSC 9220
+ * -----------------------
+ *  ON          access disable
+ *  OFF         access enable
+ */
+
+/*
+ * KEYSC
+ *
+ * SW43         KEYSC
+ * -------------------------
+ * ON           enable
+ * OFF          disable
+ */
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "bootenv",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "kernel_ro",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+        {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 2,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = 0x00000000,
+                .end    = 0x08000000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+/* SMSC 9220 */
+static struct resource smc911x_resources[] = {
+        {
+                .start  = 0x14000000,
+                .end    = 0x16000000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }, {
+                .start  = 6,
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+        },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+        .flags          = SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+        .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+        .irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+        .name           = "smsc911x",
+        .id             = -1,
+        .num_resources  = ARRAY_SIZE(smc911x_resources),
+        .resource       = smc911x_resources,
+        .dev            = {
+                .platform_data = &smsc911x_info,
+        },
+};
+
+/* KEYSC (Needs SW43 set to ON) */
+static struct sh_keysc_info keysc_info = {
+        .mode           = SH_KEYSC_MODE_1,
+        .scan_timing    = 3,
+        .delay          = 2500,
+        .keycodes = {
+                KEY_0, KEY_1, KEY_2, KEY_3, KEY_4,
+                KEY_5, KEY_6, KEY_7, KEY_8, KEY_9,
+                KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+                KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+                KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+        },
+};
+
+static struct resource keysc_resources[] = {
+        [0] = {
+                .name   = "KEYSC",
+                .start  = 0xe61b0000,
+                .end    = 0xe61b0063,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 79,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device keysc_device = {
+        .name           = "sh_keysc",
+        .id             = 0, /* "keysc0" clock */
+        .num_resources  = ARRAY_SIZE(keysc_resources),
+        .resource       = keysc_resources,
+        .dev    = {
+                .platform_data  = &keysc_info,
+        },
+};
+
+static struct platform_device *ap4evb_devices[] __initdata = {
+        &nor_flash_device,
+        &smc911x_device,
+        &keysc_device,
+};
+
+static struct map_desc ap4evb_io_desc[] __initdata = {
+        /* create a 1:1 entity map for 0xe6xxxxxx
+         * used by CPGA, INTC and PFC.
+         */
+        {
+                .virtual        = 0xe6000000,
+                .pfn            = __phys_to_pfn(0xe6000000),
+                .length         = 256 << 20,
+                .type           = MT_DEVICE_NONSHARED
+        },
+};
+
+static void __init ap4evb_map_io(void)
+{
+        iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+
+        /* setup early devices, clocks and console here as well */
+        sh7372_add_early_devices();
+        sh7367_clock_init(); /* use g3 clocks for now */
+        shmobile_setup_console();
+}
+
+static void __init ap4evb_init(void)
+{
+        sh7372_pinmux_init();
+
+        /* enable SCIFA0 */
+        gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+        gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+        /* enable SMSC911X */
+        gpio_request(GPIO_FN_CS5A,      NULL);
+        gpio_request(GPIO_FN_IRQ6_39,   NULL);
+
+        /* enable LED 1 - 4 */
+        gpio_request(GPIO_PORT185, NULL);
+        gpio_request(GPIO_PORT186, NULL);
+        gpio_request(GPIO_PORT187, NULL);
+        gpio_request(GPIO_PORT188, NULL);
+        gpio_direction_output(GPIO_PORT185, 1);
+        gpio_direction_output(GPIO_PORT186, 1);
+        gpio_direction_output(GPIO_PORT187, 1);
+        gpio_direction_output(GPIO_PORT188, 1);
+        gpio_export(GPIO_PORT185, 0);
+        gpio_export(GPIO_PORT186, 0);
+        gpio_export(GPIO_PORT187, 0);
+        gpio_export(GPIO_PORT188, 0);
+
+        /* enable Debug switch (S6) */
+        gpio_request(GPIO_PORT32, NULL);
+        gpio_request(GPIO_PORT33, NULL);
+        gpio_request(GPIO_PORT34, NULL);
+        gpio_request(GPIO_PORT35, NULL);
+        gpio_direction_input(GPIO_PORT32);
+        gpio_direction_input(GPIO_PORT33);
+        gpio_direction_input(GPIO_PORT34);
+        gpio_direction_input(GPIO_PORT35);
+        gpio_export(GPIO_PORT32, 0);
+        gpio_export(GPIO_PORT33, 0);
+        gpio_export(GPIO_PORT34, 0);
+        gpio_export(GPIO_PORT35, 0);
+
+        /* enable KEYSC */
+        gpio_request(GPIO_FN_KEYOUT0, NULL);
+        gpio_request(GPIO_FN_KEYOUT1, NULL);
+        gpio_request(GPIO_FN_KEYOUT2, NULL);
+        gpio_request(GPIO_FN_KEYOUT3, NULL);
+        gpio_request(GPIO_FN_KEYOUT4, NULL);
+        gpio_request(GPIO_FN_KEYIN0_136, NULL);
+        gpio_request(GPIO_FN_KEYIN1_135, NULL);
+        gpio_request(GPIO_FN_KEYIN2_134, NULL);
+        gpio_request(GPIO_FN_KEYIN3_133, NULL);
+        gpio_request(GPIO_FN_KEYIN4,     NULL);
+
+        sh7372_add_standard_devices();
+
+        platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices));
+}
+
+MACHINE_START(AP4EVB, "ap4evb")
+        .phys_io        = 0xe6000000,
+        .io_pg_offst    = ((0xe6000000) >> 18) & 0xfffc,
+        .map_io         = ap4evb_map_io,
+        .init_irq       = sh7372_init_irq,
+        .init_machine   = ap4evb_init,
+        .timer          = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
new file mode 100644
index 00000000000..f36c9a94d32
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -0,0 +1,211 @@
+/*
+ * G3EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "bootenv",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "kernel_ro",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+        {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 2,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = 0x00000000,
+                .end    = 0x08000000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+        if (!power) /* only power-on supported for now */
+                return;
+
+        /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+        __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+        .on_chip = 1,
+        .port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+        [0] = {
+                .name   = "USBHS",
+                .start  = 0xe6890000,
+                .end    = 0xe68900e5,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 65,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device usb_host_device = {
+        .name           = "r8a66597_hcd",
+        .id             = 0,
+        .dev = {
+                .platform_data          = &usb_host_data,
+                .dma_mask               = NULL,
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(usb_host_resources),
+        .resource       = usb_host_resources,
+};
+
+static struct platform_device *g3evm_devices[] __initdata = {
+        &nor_flash_device,
+        &usb_host_device,
+};
+
+static struct map_desc g3evm_io_desc[] __initdata = {
+        /* create a 1:1 entity map for 0xe6xxxxxx
+         * used by CPGA, INTC and PFC.
+         */
+        {
+                .virtual        = 0xe6000000,
+                .pfn            = __phys_to_pfn(0xe6000000),
+                .length         = 256 << 20,
+                .type           = MT_DEVICE_NONSHARED
+        },
+};
+
+static void __init g3evm_map_io(void)
+{
+        iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+
+        /* setup early devices, clocks and console here as well */
+        sh7367_add_early_devices();
+        sh7367_clock_init();
+        shmobile_setup_console();
+}
+
+static void __init g3evm_init(void)
+{
+        sh7367_pinmux_init();
+
+        /* Lit DS4 LED */
+        gpio_request(GPIO_PORT22, NULL);
+        gpio_direction_output(GPIO_PORT22, 1);
+        gpio_export(GPIO_PORT22, 0);
+
+        /* Lit DS8 LED */
+        gpio_request(GPIO_PORT23, NULL);
+        gpio_direction_output(GPIO_PORT23, 1);
+        gpio_export(GPIO_PORT23, 0);
+
+        /* Lit DS3 LED */
+        gpio_request(GPIO_PORT24, NULL);
+        gpio_direction_output(GPIO_PORT24, 1);
+        gpio_export(GPIO_PORT24, 0);
+
+        /* SCIFA1 */
+        gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+        gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+        gpio_request(GPIO_FN_SCIFA1_CTS, NULL);
+        gpio_request(GPIO_FN_SCIFA1_RTS, NULL);
+
+        /* USBHS */
+        gpio_request(GPIO_FN_VBUS0, NULL);
+        gpio_request(GPIO_FN_PWEN, NULL);
+        gpio_request(GPIO_FN_OVCN, NULL);
+        gpio_request(GPIO_FN_OVCN2, NULL);
+        gpio_request(GPIO_FN_EXTLP, NULL);
+        gpio_request(GPIO_FN_IDIN, NULL);
+
+        /* enable clock in SYMSTPCR2 */
+        __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048);
+
+        /* setup USB phy */
+        __raw_writew(0x0300, 0xe605810a);       /* USBCR1 */
+        __raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
+        __raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
+        __raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+
+        sh7367_add_standard_devices();
+
+        platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices));
+}
+
+MACHINE_START(G3EVM, "g3evm")
+        .phys_io        = 0xe6000000,
+        .io_pg_offst    = ((0xe6000000) >> 18) & 0xfffc,
+        .map_io         = g3evm_map_io,
+        .init_irq       = sh7367_init_irq,
+        .init_machine   = g3evm_init,
+        .timer          = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
new file mode 100644
index 00000000000..5acd623f93e
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -0,0 +1,211 @@
+/*
+ * G4EVM board support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static struct mtd_partition nor_flash_partitions[] = {
+        {
+                .name           = "loader",
+                .offset         = 0x00000000,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "bootenv",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 512 * 1024,
+        },
+        {
+                .name           = "kernel_ro",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+                .mask_flags     = MTD_WRITEABLE,
+        },
+        {
+                .name           = "kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 8 * 1024 * 1024,
+        },
+        {
+                .name           = "data",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = MTDPART_SIZ_FULL,
+        },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+        .width          = 2,
+        .parts          = nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+        [0]     = {
+                .start  = 0x00000000,
+                .end    = 0x08000000 - 1,
+                .flags  = IORESOURCE_MEM,
+        }
+};
+
+static struct platform_device nor_flash_device = {
+        .name           = "physmap-flash",
+        .dev            = {
+                .platform_data  = &nor_flash_data,
+        },
+        .num_resources  = ARRAY_SIZE(nor_flash_resources),
+        .resource       = nor_flash_resources,
+};
+
+/* USBHS */
+void usb_host_port_power(int port, int power)
+{
+        if (!power) /* only power-on supported for now */
+                return;
+
+        /* set VBOUT/PWEN and EXTLP0 in DVSTCTR */
+        __raw_writew(__raw_readw(0xe6890008) | 0x600, 0xe6890008);
+}
+
+static struct r8a66597_platdata usb_host_data = {
+        .on_chip = 1,
+        .port_power = usb_host_port_power,
+};
+
+static struct resource usb_host_resources[] = {
+        [0] = {
+                .name   = "USBHS",
+                .start  = 0xe6890000,
+                .end    = 0xe68900e5,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 65,
+                .end    = 65,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device usb_host_device = {
+        .name           = "r8a66597_hcd",
+        .id             = 0,
+        .dev = {
+                .platform_data          = &usb_host_data,
+                .dma_mask               = NULL,
+                .coherent_dma_mask      = 0xffffffff,
+        },
+        .num_resources  = ARRAY_SIZE(usb_host_resources),
+        .resource       = usb_host_resources,
+};
+
+static struct platform_device *g4evm_devices[] __initdata = {
+        &nor_flash_device,
+        &usb_host_device,
+};
+
+static struct map_desc g4evm_io_desc[] __initdata = {
+        /* create a 1:1 entity map for 0xe6xxxxxx
+         * used by CPGA, INTC and PFC.
+         */
+        {
+                .virtual        = 0xe6000000,
+                .pfn            = __phys_to_pfn(0xe6000000),
+                .length         = 256 << 20,
+                .type           = MT_DEVICE_NONSHARED
+        },
+};
+
+static void __init g4evm_map_io(void)
+{
+        iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+
+        /* setup early devices, clocks and console here as well */
+        sh7377_add_early_devices();
+        sh7367_clock_init(); /* use g3 clocks for now */
+        shmobile_setup_console();
+}
+
+static void __init g4evm_init(void)
+{
+        sh7377_pinmux_init();
+
+        /* Lit DS14 LED */
+        gpio_request(GPIO_PORT109, NULL);
+        gpio_direction_output(GPIO_PORT109, 1);
+        gpio_export(GPIO_PORT109, 1);
+
+        /* Lit DS15 LED */
+        gpio_request(GPIO_PORT110, NULL);
+        gpio_direction_output(GPIO_PORT110, 1);
+        gpio_export(GPIO_PORT110, 1);
+
+        /* Lit DS16 LED */
+        gpio_request(GPIO_PORT112, NULL);
+        gpio_direction_output(GPIO_PORT112, 1);
+        gpio_export(GPIO_PORT112, 1);
+
+        /* Lit DS17 LED */
+        gpio_request(GPIO_PORT113, NULL);
+        gpio_direction_output(GPIO_PORT113, 1);
+        gpio_export(GPIO_PORT113, 1);
+
+        /* USBHS */
+        gpio_request(GPIO_FN_VBUS_0, NULL);
+        gpio_request(GPIO_FN_PWEN, NULL);
+        gpio_request(GPIO_FN_OVCN, NULL);
+        gpio_request(GPIO_FN_OVCN2, NULL);
+        gpio_request(GPIO_FN_EXTLP, NULL);
+        gpio_request(GPIO_FN_IDIN, NULL);
+
+        /* enable clock in SMSTPCR3 */
+        __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c);
+
+        /* setup USB phy */
+        __raw_writew(0x0200, 0xe605810a);       /* USBCR1 */
+        __raw_writew(0x00e0, 0xe60581c0);       /* CPFCH */
+        __raw_writew(0x6010, 0xe60581c6);       /* CGPOSR */
+        __raw_writew(0x8a0a, 0xe605810c);       /* USBCR2 */
+
+        sh7377_add_standard_devices();
+
+        platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices));
+}
+
+MACHINE_START(G4EVM, "g4evm")
+        .phys_io        = 0xe6000000,
+        .io_pg_offst    = ((0xe6000000) >> 18) & 0xfffc,
+        .map_io         = g4evm_map_io,
+        .init_irq       = sh7377_init_irq,
+        .init_machine   = g4evm_init,
+        .timer          = &shmobile_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
new file mode 100644
index 00000000000..58bd54e1113
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -0,0 +1,96 @@
+/*
+ * Preliminary clock framework support for sh7367
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+
+struct clk {
+        const char *name;
+        unsigned long rate;
+};
+
+#include <asm/clkdev.h>
+
+int __clk_get(struct clk *clk)
+{
+        return 1;
+}
+EXPORT_SYMBOL(__clk_get);
+
+void __clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(__clk_put);
+
+
+int clk_enable(struct clk *clk)
+{
+        return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+        return clk ? clk->rate : 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* a static peripheral clock for now - enough to get sh-sci working */
+static struct clk peripheral_clk = {
+        .name       = "peripheral_clk",
+        .rate       = 48000000,
+};
+
+/* a static rclk for now - enough to get sh_cmt working */
+static struct clk r_clk = {
+        .name       = "r_clk",
+        .rate       = 32768,
+};
+
+/* a static usb0 for now - enough to get r8a66597 working */
+static struct clk usb0_clk = {
+        .name       = "usb0",
+};
+
+static struct clk_lookup lookups[] = {
+        {
+                .clk = &peripheral_clk,
+        }, {
+                .clk = &r_clk,
+        }, {
+                .clk = &usb0_clk,
+        }
+};
+
+void __init sh7367_clock_init(void)
+{
+        int i;
+
+        for (i = 0; i < ARRAY_SIZE(lookups); i++) {
+                lookups[i].con_id = lookups[i].clk->name;
+                clkdev_add(&lookups[i]);
+        }
+}
diff --git a/arch/arm/mach-shmobile/console.c b/arch/arm/mach-shmobile/console.c
new file mode 100644
index 00000000000..9411a5bf4fd
--- /dev/null
+++ b/arch/arm/mach-shmobile/console.c
@@ -0,0 +1,31 @@
+/*
+ * SH-Mobile Console
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+#include <asm/mach/map.h>
+
+void __init shmobile_setup_console(void)
+{
+        parse_early_param();
+
+        /* Let earlyprintk output early console messages */
+        early_platform_driver_probe("earlyprintk", 1, 1);
+}
diff --git a/arch/arm/mach-shmobile/include/mach/clkdev.h b/arch/arm/mach-shmobile/include/mach/clkdev.h
new file mode 100644
index 00000000000..36d0163a857
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+int __clk_get(struct clk *clk);
+void __clk_put(struct clk *clk);
+
+#endif /* __ASM_MACH_CLKDEV_H */
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
new file mode 100644
index 00000000000..57903605cc5
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -0,0 +1,23 @@
+#ifndef __ARCH_MACH_COMMON_H
+#define __ARCH_MACH_COMMON_H
+
+extern struct sys_timer shmobile_timer;
+extern void shmobile_setup_console(void);
+
+extern void sh7367_init_irq(void);
+extern void sh7367_add_early_devices(void);
+extern void sh7367_add_standard_devices(void);
+extern void sh7367_clock_init(void);
+extern void sh7367_pinmux_init(void);
+
+extern void sh7377_init_irq(void);
+extern void sh7377_add_early_devices(void);
+extern void sh7377_add_standard_devices(void);
+extern void sh7377_pinmux_init(void);
+
+extern void sh7372_init_irq(void);
+extern void sh7372_add_early_devices(void);
+extern void sh7372_add_standard_devices(void);
+extern void sh7372_pinmux_init(void);
+
+#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
new file mode 100644
index 00000000000..40a8c178f10
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
new file mode 100644
index 00000000000..a285d13c741
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+        .macro  disable_fiq
+        .endm
+
+        .macro  get_irqnr_preamble, base, tmp
+        ldr     \base, =INTFLGA
+        .endm
+
+        .macro  arch_ret_to_user, tmp1, tmp2
+        .endm
+
+        .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+        ldr     \irqnr, [\base]
+        cmp     \irqnr, #0
+        beq     1000f
+        /* intevt to irq number */
+        lsr     \irqnr, \irqnr, #0x5
+        subs    \irqnr, \irqnr, #16
+
+1000:
+        .endm
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
new file mode 100644
index 00000000000..5bc6bd444d7
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * Generic GPIO API and pinmux table support
+ *
+ * Copyright (c) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+
+#define ARCH_NR_GPIOS 1024
+#include <linux/sh_pfc.h>
+
+#ifdef CONFIG_GPIOLIB
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+        return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
new file mode 100644
index 00000000000..3f0ef194603
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_HARDWARE_H
+#define __ASM_MACH_HARDWARE_H
+
+/* INTFLGA register - used by low level interrupt code in entry-macro.S */
+#define INTFLGA                 0xe6980018
+
+#endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/io.h b/arch/arm/mach-shmobile/include/mach/io.h
new file mode 100644
index 00000000000..7339fe46cb7
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/io.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
+
+#define IO_SPACE_LIMIT          0xffffffff
+
+#define __io(a)                 ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif /* __ASM_MACH_IO_H */
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
new file mode 100644
index 00000000000..5179b72e1ee
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS         512
+#define NR_IRQS_LEGACY  8
+
+#define evt2irq(evt)            (((evt) >> 5) - 16)
+#define irq2evt(irq)            (((irq) + 16) << 5)
+
+#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
new file mode 100644
index 00000000000..e188183f4dc
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_MEMORY_H
+#define __ASM_MACH_MEMORY_H
+
+#define PHYS_OFFSET     UL(CONFIG_MEMORY_START)
+#define MEM_SIZE        UL(CONFIG_MEMORY_SIZE)
+
+#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7367.h b/arch/arm/mach-shmobile/include/mach/sh7367.h
new file mode 100644
index 00000000000..52d0de686f6
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7367.h
@@ -0,0 +1,332 @@
+#ifndef __ASM_SH7367_H__
+#define __ASM_SH7367_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+        /* 49-1 -> 49-6 (GPIO) */
+        GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+        GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+        GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+        GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+        GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+        GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+        GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+        GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+        GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+        GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+        GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+        GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+        GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+        GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+        GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+        GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+        GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+        GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+        GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+        GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+        GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+        GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+        GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+        GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+        GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+        GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+        GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+        GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+        GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+        GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+        GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+        GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+        GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+        GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+        GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+        GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+        GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+        GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+        GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+        GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+        GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+        GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+        GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+        GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+        GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+        GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+        GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+        GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+        GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+        GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+        GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+        GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+        GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+        GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+        GPIO_PORT270, GPIO_PORT271, GPIO_PORT272,
+
+        /* Special Pull-up / Pull-down Functions */
+        GPIO_FN_PORT48_KEYIN0_PU, GPIO_FN_PORT49_KEYIN1_PU,
+        GPIO_FN_PORT50_KEYIN2_PU, GPIO_FN_PORT55_KEYIN3_PU,
+        GPIO_FN_PORT56_KEYIN4_PU, GPIO_FN_PORT57_KEYIN5_PU,
+        GPIO_FN_PORT58_KEYIN6_PU,
+
+        /* 49-1 (FN) */
+        GPIO_FN_VBUS0, GPIO_FN_CPORT0, GPIO_FN_CPORT1, GPIO_FN_CPORT2,
+        GPIO_FN_CPORT3, GPIO_FN_CPORT4, GPIO_FN_CPORT5, GPIO_FN_CPORT6,
+        GPIO_FN_CPORT7, GPIO_FN_CPORT8, GPIO_FN_CPORT9, GPIO_FN_CPORT10,
+        GPIO_FN_CPORT11, GPIO_FN_SIN2, GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+        GPIO_FN_CPORT13, GPIO_FN_RFSPO4, GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+        GPIO_FN_CPORT15, GPIO_FN_CPORT16, GPIO_FN_CPORT17, GPIO_FN_SOUT2,
+        GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_CPORT19, GPIO_FN_CPORT20,
+        GPIO_FN_RFSPO6, GPIO_FN_CPORT21, GPIO_FN_STATUS0, GPIO_FN_CPORT22,
+        GPIO_FN_STATUS1, GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+        GPIO_FN_MPORT0, GPIO_FN_MPORT1, GPIO_FN_B_SYNLD1, GPIO_FN_B_SYNLD2,
+        GPIO_FN_XMAINPS, GPIO_FN_XDIVPS, GPIO_FN_XIDRST, GPIO_FN_IDCLK,
+        GPIO_FN_IDIO, GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD,
+        GPIO_FN_M02_BERDAT, GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+        GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+        GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+
+        /* 49-2 (FN) */
+        GPIO_FN_HSU_IQ_AGC6, GPIO_FN_MFG2_IN2, GPIO_FN_MSIOF2_MCK0,
+        GPIO_FN_HSU_IQ_AGC5, GPIO_FN_MFG2_IN1, GPIO_FN_MSIOF2_MCK1,
+        GPIO_FN_HSU_IQ_AGC4, GPIO_FN_MSIOF2_RSYNC,
+        GPIO_FN_HSU_IQ_AGC3, GPIO_FN_MFG2_OUT1, GPIO_FN_MSIOF2_RSCK,
+        GPIO_FN_HSU_IQ_AGC2, GPIO_FN_PORT42_KEYOUT0,
+        GPIO_FN_HSU_IQ_AGC1, GPIO_FN_PORT43_KEYOUT1,
+        GPIO_FN_HSU_IQ_AGC0, GPIO_FN_PORT44_KEYOUT2,
+        GPIO_FN_HSU_IQ_AGC_ST, GPIO_FN_PORT45_KEYOUT3,
+        GPIO_FN_HSU_IQ_PDO, GPIO_FN_PORT46_KEYOUT4,
+        GPIO_FN_HSU_IQ_PYO, GPIO_FN_PORT47_KEYOUT5,
+        GPIO_FN_HSU_EN_TXMUX_G3MO, GPIO_FN_PORT48_KEYIN0,
+        GPIO_FN_HSU_I_TXMUX_G3MO, GPIO_FN_PORT49_KEYIN1,
+        GPIO_FN_HSU_Q_TXMUX_G3MO, GPIO_FN_PORT50_KEYIN2,
+        GPIO_FN_HSU_SYO, GPIO_FN_PORT51_MSIOF2_TSYNC,
+        GPIO_FN_HSU_SDO, GPIO_FN_PORT52_MSIOF2_TSCK,
+        GPIO_FN_HSU_TGTTI_G3MO, GPIO_FN_PORT53_MSIOF2_TXD,
+        GPIO_FN_B_TIME_STAMP, GPIO_FN_PORT54_MSIOF2_RXD,
+        GPIO_FN_HSU_SDI, GPIO_FN_PORT55_KEYIN3,
+        GPIO_FN_HSU_SCO, GPIO_FN_PORT56_KEYIN4,
+        GPIO_FN_HSU_DREQ, GPIO_FN_PORT57_KEYIN5,
+        GPIO_FN_HSU_DACK, GPIO_FN_PORT58_KEYIN6,
+        GPIO_FN_HSU_CLK61M, GPIO_FN_PORT59_MSIOF2_SS1,
+        GPIO_FN_HSU_XRST, GPIO_FN_PORT60_MSIOF2_SS2,
+        GPIO_FN_PCMCLKO, GPIO_FN_SYNC8KO, GPIO_FN_DNPCM_A, GPIO_FN_UPPCM_A,
+        GPIO_FN_XTALB1L,
+        GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+        GPIO_FN_GPS_AGC2, GPIO_FN_SCIFA0_SCK,
+        GPIO_FN_GPS_AGC3, GPIO_FN_SCIFA0_TXD,
+        GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+        GPIO_FN_GPS_PWRD, GPIO_FN_SCIFA0_CTS,
+        GPIO_FN_GPS_IM, GPIO_FN_GPS_IS, GPIO_FN_GPS_QM, GPIO_FN_GPS_QS,
+        GPIO_FN_SIUBOMC, GPIO_FN_TPU2TO0,
+        GPIO_FN_SIUCKB, GPIO_FN_TPU2TO1,
+        GPIO_FN_SIUBOLR, GPIO_FN_BBIF2_TSYNC, GPIO_FN_TPU2TO2,
+        GPIO_FN_SIUBOBT, GPIO_FN_BBIF2_TSCK, GPIO_FN_TPU2TO3,
+        GPIO_FN_SIUBOSLD, GPIO_FN_BBIF2_TXD, GPIO_FN_TPU3TO0,
+        GPIO_FN_SIUBILR, GPIO_FN_TPU3TO1,
+        GPIO_FN_SIUBIBT, GPIO_FN_TPU3TO2,
+        GPIO_FN_SIUBISLD, GPIO_FN_TPU3TO3,
+        GPIO_FN_NMI, GPIO_FN_TPU4TO0,
+        GPIO_FN_DNPCM_M, GPIO_FN_TPU4TO1, GPIO_FN_TPU4TO2, GPIO_FN_TPU4TO3,
+        GPIO_FN_IRQ_TMPB,
+        GPIO_FN_PWEN, GPIO_FN_MFG1_OUT1,
+        GPIO_FN_OVCN, GPIO_FN_MFG1_IN1,
+        GPIO_FN_OVCN2, GPIO_FN_MFG1_IN2,
+
+        /* 49-3 (FN) */
+        GPIO_FN_RFSPO1, GPIO_FN_RFSPO2, GPIO_FN_RFSPO3, GPIO_FN_PORT93_VIO_CKO2,
+        GPIO_FN_USBTERM, GPIO_FN_EXTLP, GPIO_FN_IDIN,
+        GPIO_FN_SCIFA5_CTS, GPIO_FN_MFG0_IN1,
+        GPIO_FN_SCIFA5_RTS, GPIO_FN_MFG0_IN2,
+        GPIO_FN_SCIFA5_RXD,
+        GPIO_FN_SCIFA5_TXD,
+        GPIO_FN_SCIFA5_SCK, GPIO_FN_MFG0_OUT1,
+        GPIO_FN_A0_EA0, GPIO_FN_BS,
+        GPIO_FN_A14_EA14, GPIO_FN_PORT102_KEYOUT0,
+        GPIO_FN_A15_EA15, GPIO_FN_PORT103_KEYOUT1, GPIO_FN_DV_CLKOL,
+        GPIO_FN_A16_EA16, GPIO_FN_PORT104_KEYOUT2,
+        GPIO_FN_DV_VSYNCL, GPIO_FN_MSIOF0_SS1,
+        GPIO_FN_A17_EA17, GPIO_FN_PORT105_KEYOUT3,
+        GPIO_FN_DV_HSYNCL, GPIO_FN_MSIOF0_TSYNC,
+        GPIO_FN_A18_EA18, GPIO_FN_PORT106_KEYOUT4,
+        GPIO_FN_DV_DL0, GPIO_FN_MSIOF0_TSCK,
+        GPIO_FN_A19_EA19, GPIO_FN_PORT107_KEYOUT5,
+        GPIO_FN_DV_DL1, GPIO_FN_MSIOF0_TXD,
+        GPIO_FN_A20_EA20, GPIO_FN_PORT108_KEYIN0,
+        GPIO_FN_DV_DL2, GPIO_FN_MSIOF0_RSCK,
+        GPIO_FN_A21_EA21, GPIO_FN_PORT109_KEYIN1,
+        GPIO_FN_DV_DL3, GPIO_FN_MSIOF0_RSYNC,
+        GPIO_FN_A22_EA22, GPIO_FN_PORT110_KEYIN2,
+        GPIO_FN_DV_DL4, GPIO_FN_MSIOF0_MCK0,
+        GPIO_FN_A23_EA23, GPIO_FN_PORT111_KEYIN3,
+        GPIO_FN_DV_DL5, GPIO_FN_MSIOF0_MCK1,
+        GPIO_FN_A24_EA24, GPIO_FN_PORT112_KEYIN4,
+        GPIO_FN_DV_DL6, GPIO_FN_MSIOF0_RXD,
+        GPIO_FN_A25_EA25, GPIO_FN_PORT113_KEYIN5,
+        GPIO_FN_DV_DL7, GPIO_FN_MSIOF0_SS2,
+        GPIO_FN_A26, GPIO_FN_PORT113_KEYIN6, GPIO_FN_DV_CLKIL,
+        GPIO_FN_D0_ED0_NAF0, GPIO_FN_D1_ED1_NAF1, GPIO_FN_D2_ED2_NAF2,
+        GPIO_FN_D3_ED3_NAF3, GPIO_FN_D4_ED4_NAF4, GPIO_FN_D5_ED5_NAF5,
+        GPIO_FN_D6_ED6_NAF6, GPIO_FN_D7_ED7_NAF7, GPIO_FN_D8_ED8_NAF8,
+        GPIO_FN_D9_ED9_NAF9, GPIO_FN_D10_ED10_NAF10, GPIO_FN_D11_ED11_NAF11,
+        GPIO_FN_D12_ED12_NAF12, GPIO_FN_D13_ED13_NAF13,
+        GPIO_FN_D14_ED14_NAF14, GPIO_FN_D15_ED15_NAF15,
+        GPIO_FN_CS4, GPIO_FN_CS5A, GPIO_FN_CS5B, GPIO_FN_FCE1,
+        GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_FCE0, GPIO_FN_CS6A,
+        GPIO_FN_DACK0, GPIO_FN_WAIT, GPIO_FN_DREQ0, GPIO_FN_RD_XRD,
+        GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_WE0_XWR0_FWE,
+        GPIO_FN_WE1_XWR1, GPIO_FN_FRB, GPIO_FN_CKO,
+        GPIO_FN_NBRSTOUT, GPIO_FN_NBRST,
+
+        /* 49-4 (FN) */
+        GPIO_FN_RFSPO0, GPIO_FN_PORT146_VIO_CKO2, GPIO_FN_TSTMD,
+        GPIO_FN_VIO_VD, GPIO_FN_VIO_HD,
+        GPIO_FN_VIO_D0, GPIO_FN_VIO_D1, GPIO_FN_VIO_D2,
+        GPIO_FN_VIO_D3, GPIO_FN_VIO_D4, GPIO_FN_VIO_D5,
+        GPIO_FN_VIO_D6, GPIO_FN_VIO_D7, GPIO_FN_VIO_D8,
+        GPIO_FN_VIO_D9, GPIO_FN_VIO_D10, GPIO_FN_VIO_D11,
+        GPIO_FN_VIO_D12, GPIO_FN_VIO_D13, GPIO_FN_VIO_D14,
+        GPIO_FN_VIO_D15, GPIO_FN_VIO_CLK, GPIO_FN_VIO_FIELD,
+        GPIO_FN_VIO_CKO,
+        GPIO_FN_MFG3_IN1, GPIO_FN_MFG3_IN2,
+        GPIO_FN_M9_SLCD_A01, GPIO_FN_MFG3_OUT1, GPIO_FN_TPU0TO0,
+        GPIO_FN_M10_SLCD_CK1, GPIO_FN_MFG4_IN1, GPIO_FN_TPU0TO1,
+        GPIO_FN_M11_SLCD_SO1, GPIO_FN_MFG4_IN2, GPIO_FN_TPU0TO2,
+        GPIO_FN_M12_SLCD_CE1, GPIO_FN_MFG4_OUT1, GPIO_FN_TPU0TO3,
+        GPIO_FN_LCDD0, GPIO_FN_PORT175_KEYOUT0, GPIO_FN_DV_D0,
+        GPIO_FN_SIUCKA, GPIO_FN_MFG0_OUT2,
+        GPIO_FN_LCDD1, GPIO_FN_PORT176_KEYOUT1, GPIO_FN_DV_D1,
+        GPIO_FN_SIUAOLR, GPIO_FN_BBIF2_TSYNC1,
+        GPIO_FN_LCDD2, GPIO_FN_PORT177_KEYOUT2, GPIO_FN_DV_D2,
+        GPIO_FN_SIUAOBT, GPIO_FN_BBIF2_TSCK1,
+        GPIO_FN_LCDD3, GPIO_FN_PORT178_KEYOUT3, GPIO_FN_DV_D3,
+        GPIO_FN_SIUAOSLD, GPIO_FN_BBIF2_TXD1,
+        GPIO_FN_LCDD4, GPIO_FN_PORT179_KEYOUT4, GPIO_FN_DV_D4,
+        GPIO_FN_SIUAISPD, GPIO_FN_MFG1_OUT2,
+        GPIO_FN_LCDD5, GPIO_FN_PORT180_KEYOUT5, GPIO_FN_DV_D5,
+        GPIO_FN_SIUAILR, GPIO_FN_MFG2_OUT2,
+        GPIO_FN_LCDD6, GPIO_FN_DV_D6,
+        GPIO_FN_SIUAIBT, GPIO_FN_MFG3_OUT2, GPIO_FN_XWR2,
+        GPIO_FN_LCDD7, GPIO_FN_DV_D7,
+        GPIO_FN_SIUAISLD, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+        GPIO_FN_LCDD8, GPIO_FN_DV_D8, GPIO_FN_D16, GPIO_FN_ED16,
+        GPIO_FN_LCDD9, GPIO_FN_DV_D9, GPIO_FN_D17, GPIO_FN_ED17,
+        GPIO_FN_LCDD10, GPIO_FN_DV_D10, GPIO_FN_D18, GPIO_FN_ED18,
+        GPIO_FN_LCDD11, GPIO_FN_DV_D11, GPIO_FN_D19, GPIO_FN_ED19,
+        GPIO_FN_LCDD12, GPIO_FN_DV_D12, GPIO_FN_D20, GPIO_FN_ED20,
+        GPIO_FN_LCDD13, GPIO_FN_DV_D13, GPIO_FN_D21, GPIO_FN_ED21,
+        GPIO_FN_LCDD14, GPIO_FN_DV_D14, GPIO_FN_D22, GPIO_FN_ED22,
+        GPIO_FN_LCDD15, GPIO_FN_DV_D15, GPIO_FN_D23, GPIO_FN_ED23,
+        GPIO_FN_LCDD16, GPIO_FN_DV_HSYNC, GPIO_FN_D24, GPIO_FN_ED24,
+        GPIO_FN_LCDD17, GPIO_FN_DV_VSYNC, GPIO_FN_D25, GPIO_FN_ED25,
+        GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_MSIOF0L_TSCK,
+        GPIO_FN_D26, GPIO_FN_ED26,
+        GPIO_FN_LCDD19, GPIO_FN_MSIOF0L_TSYNC,
+        GPIO_FN_D27, GPIO_FN_ED27,
+        GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0,
+        GPIO_FN_D28, GPIO_FN_ED28,
+        GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1,
+        GPIO_FN_D29, GPIO_FN_ED29,
+        GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_SS1,
+        GPIO_FN_D30, GPIO_FN_ED30,
+        GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_SS2,
+        GPIO_FN_D31, GPIO_FN_ED31,
+        GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_DV_CKO, GPIO_FN_SIUAOSPD,
+        GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_RSYNC,
+
+
+        /* 49-5 (FN) */
+        GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+        GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_RSCK,
+        GPIO_FN_LCDCSYN, GPIO_FN_LCDCSYN2, GPIO_FN_DV_CKI,
+        GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_MSIOF0L_RXD,
+        GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_MSIOF0L_TXD,
+        GPIO_FN_VIO_DR0, GPIO_FN_VIO_DR1, GPIO_FN_VIO_DR2, GPIO_FN_VIO_DR3,
+        GPIO_FN_VIO_DR4, GPIO_FN_VIO_DR5, GPIO_FN_VIO_DR6, GPIO_FN_VIO_DR7,
+        GPIO_FN_VIO_VDR, GPIO_FN_VIO_HDR,
+        GPIO_FN_VIO_CLKR, GPIO_FN_VIO_CKOR,
+        GPIO_FN_SCIFA1_TXD, GPIO_FN_GPS_PGFA0,
+        GPIO_FN_SCIFA1_SCK, GPIO_FN_GPS_PGFA1,
+        GPIO_FN_SCIFA1_RTS, GPIO_FN_GPS_EPPSINMON,
+        GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_CTS,
+        GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA1_TXD2, GPIO_FN_GPS_TXD,
+        GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA1_CTS2, GPIO_FN_I2C_SDA2,
+        GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA1_SCK2,
+        GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA1_RXD2, GPIO_FN_GPS_RXD,
+        GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA1_RTS2,
+        GPIO_FN_MSIOF1_RSYNC, GPIO_FN_I2C_SCL2,
+        GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+        GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+        GPIO_FN_MSIOF1_SS2,
+        GPIO_FN_PORT236_IROUT, GPIO_FN_IRDA_OUT,
+        GPIO_FN_IRDA_IN, GPIO_FN_IRDA_FIRSEL,
+        GPIO_FN_TPU1TO0, GPIO_FN_TS_SPSYNC3,
+        GPIO_FN_TPU1TO1, GPIO_FN_TS_SDAT3,
+        GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT241_MSIOF2_SS1,
+        GPIO_FN_TPU1TO3, GPIO_FN_PORT242_MSIOF2_TSCK,
+        GPIO_FN_M13_BSW, GPIO_FN_PORT243_MSIOF2_TSYNC,
+        GPIO_FN_M14_GSW, GPIO_FN_PORT244_MSIOF2_TXD,
+        GPIO_FN_PORT245_IROUT, GPIO_FN_M15_RSW,
+        GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1,
+        GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1,
+        GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT248_MSIOF2_SS2,
+        GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT249_MSIOF2_RXD,
+        GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+        GPIO_FN_SDHICLK0, GPIO_FN_TCK2,
+        GPIO_FN_SDHICD0,
+        GPIO_FN_SDHID0_0, GPIO_FN_TMS2,
+        GPIO_FN_SDHID0_1, GPIO_FN_TDO2,
+        GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+        GPIO_FN_SDHID0_3, GPIO_FN_RTCK2,
+
+        /* 49-6 (FN) */
+        GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+        GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+        GPIO_FN_SDHICLK1, GPIO_FN_TCK3,
+        GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2,
+        GPIO_FN_TS_SPSYNC2, GPIO_FN_TMS3,
+        GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_AO2,
+        GPIO_FN_TS_SDAT2, GPIO_FN_TDO3,
+        GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2,
+        GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+        GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2,
+        GPIO_FN_TS_SCK2, GPIO_FN_RTCK3,
+        GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+        GPIO_FN_SDHICLK2, GPIO_FN_SCIFB_SCK,
+        GPIO_FN_SDHID2_0, GPIO_FN_SCIFB_TXD,
+        GPIO_FN_SDHID2_1, GPIO_FN_SCIFB_CTS,
+        GPIO_FN_SDHID2_2, GPIO_FN_SCIFB_RXD,
+        GPIO_FN_SDHID2_3, GPIO_FN_SCIFB_RTS,
+        GPIO_FN_SDHICMD2,
+        GPIO_FN_RESETOUTS,
+        GPIO_FN_DIVLOCK,
+};
+
+#endif /* __ASM_SH7367_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
new file mode 100644
index 00000000000..dc34f00c56b
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -0,0 +1,434 @@
+/*
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH7372_H__
+#define __ASM_SH7372_H__
+
+/*
+ * Pin Function Controller:
+ *      GPIO_FN_xx - GPIO used to select pin function
+ *      GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+        /* PORT */
+        GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+        GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+        GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+        GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+        GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+        GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+        GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+        GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+        GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+        GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+        GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+        GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+        GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+        GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+        GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+        GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+        GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+        GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+        GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+        GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+        GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+        GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+        GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+        GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+        GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+        GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+        GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+        GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+        GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+        GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+        GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+        GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+        GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+        GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+        GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+        GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+        GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+        GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+        GPIO_PORT190,
+
+        /* IRQ */
+        GPIO_FN_IRQ0_6,         /* PORT   6 */
+        GPIO_FN_IRQ0_162,       /* PORT 162 */
+        GPIO_FN_IRQ1,           /* PORT  12 */
+        GPIO_FN_IRQ2_4,         /* PORT   4 */
+        GPIO_FN_IRQ2_5,         /* PORT   5 */
+        GPIO_FN_IRQ3_8,         /* PORT   8 */
+        GPIO_FN_IRQ3_16,        /* PORT  16 */
+        GPIO_FN_IRQ4_17,        /* PORT  17 */
+        GPIO_FN_IRQ4_163,       /* PORT 163 */
+        GPIO_FN_IRQ5,           /* PORT  18 */
+        GPIO_FN_IRQ6_39,        /* PORT  39 */
+        GPIO_FN_IRQ6_164,       /* PORT 164 */
+        GPIO_FN_IRQ7_40,        /* PORT  40 */
+        GPIO_FN_IRQ7_167,       /* PORT 167 */
+        GPIO_FN_IRQ8_41,        /* PORT  41 */
+        GPIO_FN_IRQ8_168,       /* PORT 168 */
+        GPIO_FN_IRQ9_42,        /* PORT  42 */
+        GPIO_FN_IRQ9_169,       /* PORT 169 */
+        GPIO_FN_IRQ10,          /* PORT  65 */
+        GPIO_FN_IRQ11,          /* PORT  67 */
+        GPIO_FN_IRQ12_80,       /* PORT  80 */
+        GPIO_FN_IRQ12_137,      /* PORT 137 */
+        GPIO_FN_IRQ13_81,       /* PORT  81 */
+        GPIO_FN_IRQ13_145,      /* PORT 145 */
+        GPIO_FN_IRQ14_82,       /* PORT  82 */
+        GPIO_FN_IRQ14_146,      /* PORT 146 */
+        GPIO_FN_IRQ15_83,       /* PORT  83 */
+        GPIO_FN_IRQ15_147,      /* PORT 147 */
+        GPIO_FN_IRQ16_84,       /* PORT  84 */
+        GPIO_FN_IRQ16_170,      /* PORT 170 */
+        GPIO_FN_IRQ17,          /* PORT  85 */
+        GPIO_FN_IRQ18,          /* PORT  86 */
+        GPIO_FN_IRQ19,          /* PORT  87 */
+        GPIO_FN_IRQ20,          /* PORT  92 */
+        GPIO_FN_IRQ21,          /* PORT  93 */
+        GPIO_FN_IRQ22,          /* PORT  94 */
+        GPIO_FN_IRQ23,          /* PORT  95 */
+        GPIO_FN_IRQ24,          /* PORT 112 */
+        GPIO_FN_IRQ25,          /* PORT 119 */
+        GPIO_FN_IRQ26_121,      /* PORT 121 */
+        GPIO_FN_IRQ26_172,      /* PORT 172 */
+        GPIO_FN_IRQ27_122,      /* PORT 122 */
+        GPIO_FN_IRQ27_180,      /* PORT 180 */
+        GPIO_FN_IRQ28_123,      /* PORT 123 */
+        GPIO_FN_IRQ28_181,      /* PORT 181 */
+        GPIO_FN_IRQ29_129,      /* PORT 129 */
+        GPIO_FN_IRQ29_182,      /* PORT 182 */
+        GPIO_FN_IRQ30_130,      /* PORT 130 */
+        GPIO_FN_IRQ30_183,      /* PORT 183 */
+        GPIO_FN_IRQ31_138,      /* PORT 138 */
+        GPIO_FN_IRQ31_184,      /* PORT 184 */
+
+        /*
+         * MSIOF0       (PORT 36, 37, 38, 39
+         *                    40, 41, 42, 43, 44, 45)
+         */
+        GPIO_FN_MSIOF0_TSYNC,   GPIO_FN_MSIOF0_TSCK,
+        GPIO_FN_MSIOF0_RXD,     GPIO_FN_MSIOF0_RSCK,
+        GPIO_FN_MSIOF0_RSYNC,   GPIO_FN_MSIOF0_MCK0,
+        GPIO_FN_MSIOF0_MCK1,    GPIO_FN_MSIOF0_SS1,
+        GPIO_FN_MSIOF0_SS2,     GPIO_FN_MSIOF0_TXD,
+
+        /*
+         * MSIOF1       (PORT 39, 40, 41, 42, 43, 44
+         *                    84, 85, 86, 87, 88, 89, 90, 91, 92, 93)
+         */
+        GPIO_FN_MSIOF1_TSCK_39, GPIO_FN_MSIOF1_TSYNC_40,
+        GPIO_FN_MSIOF1_TSCK_88, GPIO_FN_MSIOF1_TSYNC_89,
+        GPIO_FN_MSIOF1_TXD_41,  GPIO_FN_MSIOF1_RXD_42,
+        GPIO_FN_MSIOF1_TXD_90,  GPIO_FN_MSIOF1_RXD_91,
+        GPIO_FN_MSIOF1_SS1_43,  GPIO_FN_MSIOF1_SS2_44,
+        GPIO_FN_MSIOF1_SS1_92,  GPIO_FN_MSIOF1_SS2_93,
+        GPIO_FN_MSIOF1_RSCK,    GPIO_FN_MSIOF1_RSYNC,
+        GPIO_FN_MSIOF1_MCK0,    GPIO_FN_MSIOF1_MCK1,
+
+        /*
+         * MSIOF2       (PORT 134, 135, 136, 137, 138, 139
+         *                    148, 149, 150, 151)
+         */
+        GPIO_FN_MSIOF2_RSCK,    GPIO_FN_MSIOF2_RSYNC,
+        GPIO_FN_MSIOF2_MCK0,    GPIO_FN_MSIOF2_MCK1,
+        GPIO_FN_MSIOF2_SS1,     GPIO_FN_MSIOF2_SS2,
+        GPIO_FN_MSIOF2_TSYNC,   GPIO_FN_MSIOF2_TSCK,
+        GPIO_FN_MSIOF2_RXD,     GPIO_FN_MSIOF2_TXD,
+
+        /* MSIOF3       (PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+        GPIO_FN_BBIF1_RXD,      GPIO_FN_BBIF1_TSYNC,
+        GPIO_FN_BBIF1_TSCK,     GPIO_FN_BBIF1_TXD,
+        GPIO_FN_BBIF1_RSCK,     GPIO_FN_BBIF1_RSYNC,
+        GPIO_FN_BBIF1_FLOW,     GPIO_FN_BB_RX_FLOW_N,
+
+        /* MSIOF4       (PORT 0, 1, 2, 3) */
+        GPIO_FN_BBIF2_TSCK1,    GPIO_FN_BBIF2_TSYNC1,
+        GPIO_FN_BBIF2_TXD1,     GPIO_FN_BBIF2_RXD,
+
+        /* FSI          (PORT 4, 5, 6, 7, 8, 9, 10, 11, 15) */
+        GPIO_FN_FSIACK,         GPIO_FN_FSIBCK,
+        GPIO_FN_FSIAILR,        GPIO_FN_FSIAIBT,
+        GPIO_FN_FSIAISLD,       GPIO_FN_FSIAOMC,
+        GPIO_FN_FSIAOLR,        GPIO_FN_FSIAOBT,
+        GPIO_FN_FSIAOSLD,       GPIO_FN_FSIASPDIF_11,
+        GPIO_FN_FSIASPDIF_15,
+
+        /* FMSI         (PORT 12, 13, 14, 15, 16, 17, 18, 65) */
+        GPIO_FN_FMSOCK,         GPIO_FN_FMSOOLR,
+        GPIO_FN_FMSIOLR,        GPIO_FN_FMSOOBT,
+        GPIO_FN_FMSIOBT,        GPIO_FN_FMSOSLD,
+        GPIO_FN_FMSOILR,        GPIO_FN_FMSIILR,
+        GPIO_FN_FMSOIBT,        GPIO_FN_FMSIIBT,
+        GPIO_FN_FMSISLD,        GPIO_FN_FMSICK,
+
+        /* SCIFA0       (PORT 152, 153, 156, 157, 158) */
+        GPIO_FN_SCIFA0_TXD,     GPIO_FN_SCIFA0_RXD,
+        GPIO_FN_SCIFA0_SCK,     GPIO_FN_SCIFA0_RTS,
+        GPIO_FN_SCIFA0_CTS,
+
+        /* SCIFA1       (PORT 154, 155, 159, 160, 161) */
+        GPIO_FN_SCIFA1_TXD,     GPIO_FN_SCIFA1_RXD,
+        GPIO_FN_SCIFA1_SCK,     GPIO_FN_SCIFA1_RTS,
+        GPIO_FN_SCIFA1_CTS,
+
+        /* SCIFA2       (PORT 94, 95, 96, 97, 98) */
+        GPIO_FN_SCIFA2_CTS1,    GPIO_FN_SCIFA2_RTS1,
+        GPIO_FN_SCIFA2_TXD1,    GPIO_FN_SCIFA2_RXD1,
+        GPIO_FN_SCIFA2_SCK1,
+
+        /* SCIFA3       (PORT 43, 44,
+                             140, 141, 142, 143, 144) */
+        GPIO_FN_SCIFA3_CTS_43,  GPIO_FN_SCIFA3_CTS_140,
+        GPIO_FN_SCIFA3_RTS_44,  GPIO_FN_SCIFA3_RTS_141,
+        GPIO_FN_SCIFA3_SCK,     GPIO_FN_SCIFA3_TXD,
+        GPIO_FN_SCIFA3_RXD,
+
+        /* SCIFA4       (PORT 5, 6) */
+        GPIO_FN_SCIFA4_RXD,     GPIO_FN_SCIFA4_TXD,
+
+        /* SCIFA5       (PORT 8, 12) */
+        GPIO_FN_SCIFA5_RXD,     GPIO_FN_SCIFA5_TXD,
+
+        /* SCIFB        (PORT 162, 163, 164, 165, 166) */
+        GPIO_FN_SCIFB_SCK,      GPIO_FN_SCIFB_RTS,
+        GPIO_FN_SCIFB_CTS,      GPIO_FN_SCIFB_TXD,
+        GPIO_FN_SCIFB_RXD,
+
+        /*
+         * CEU          (PORT 16, 17,
+         *                    100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
+         *                    110, 111, 112, 113, 114, 115, 116, 117, 118, 119,
+         *                    120)
+         */
+        GPIO_FN_VIO_HD,         GPIO_FN_VIO_CKO1,       GPIO_FN_VIO_CKO2,
+        GPIO_FN_VIO_VD,         GPIO_FN_VIO_CLK,        GPIO_FN_VIO_FIELD,
+        GPIO_FN_VIO_CKO,
+        GPIO_FN_VIO_D0,         GPIO_FN_VIO_D1,         GPIO_FN_VIO_D2,
+        GPIO_FN_VIO_D3,         GPIO_FN_VIO_D4,         GPIO_FN_VIO_D5,
+        GPIO_FN_VIO_D6,         GPIO_FN_VIO_D7,         GPIO_FN_VIO_D8,
+        GPIO_FN_VIO_D9,         GPIO_FN_VIO_D10,        GPIO_FN_VIO_D11,
+        GPIO_FN_VIO_D12,        GPIO_FN_VIO_D13,        GPIO_FN_VIO_D14,
+        GPIO_FN_VIO_D15,
+
+        /* USB0         (PORT 113, 114, 115, 116, 117, 167) */
+        GPIO_FN_IDIN_0,         GPIO_FN_EXTLP_0,
+        GPIO_FN_OVCN2_0,        GPIO_FN_PWEN_0,
+        GPIO_FN_OVCN_0,         GPIO_FN_VBUS0_0,
+
+        /* USB1         (PORT 18, 113, 114, 115, 116, 117, 138, 162, 168) */
+        GPIO_FN_IDIN_1_18,      GPIO_FN_IDIN_1_113,
+        GPIO_FN_PWEN_1_115,     GPIO_FN_PWEN_1_138,
+        GPIO_FN_OVCN_1_114,     GPIO_FN_OVCN_1_162,
+        GPIO_FN_EXTLP_1,        GPIO_FN_OVCN2_1,
+        GPIO_FN_VBUS0_1,
+
+        /* GPIO         (PORT 41, 42, 43, 44) */
+        GPIO_FN_GPI0,   GPIO_FN_GPI1,   GPIO_FN_GPO0,   GPIO_FN_GPO1,
+
+        /*
+         * BSC          (PORT 19,
+         *                    20, 21, 22, 25, 26, 27, 28, 29,
+         *                    30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
+         *                    40, 41, 42, 43, 44, 45,
+         *                    62, 63, 64, 65, 66, 67,
+         *                    71, 72, 74, 75)
+         */
+        GPIO_FN_BS,     GPIO_FN_WE1,
+        GPIO_FN_CKO,    GPIO_FN_WAIT,   GPIO_FN_RDWR,
+
+        GPIO_FN_A0,     GPIO_FN_A1,     GPIO_FN_A2,     GPIO_FN_A3,
+        GPIO_FN_A6,     GPIO_FN_A7,     GPIO_FN_A8,     GPIO_FN_A9,
+        GPIO_FN_A10,    GPIO_FN_A11,    GPIO_FN_A12,    GPIO_FN_A13,
+        GPIO_FN_A14,    GPIO_FN_A15,    GPIO_FN_A16,    GPIO_FN_A17,
+        GPIO_FN_A18,    GPIO_FN_A19,    GPIO_FN_A20,    GPIO_FN_A21,
+        GPIO_FN_A22,    GPIO_FN_A23,    GPIO_FN_A24,    GPIO_FN_A25,
+        GPIO_FN_A26,
+
+        GPIO_FN_CS0,    GPIO_FN_CS2,    GPIO_FN_CS4,
+        GPIO_FN_CS5A,   GPIO_FN_CS5B,   GPIO_FN_CS6A,
+
+        /*
+         * BSC/FLCTL            (PORT 23, 24,
+         *                            46, 47, 48, 49,
+         *                            50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
+         *                            60, 61, 69, 70)
+         */
+        GPIO_FN_RD_FSC,         GPIO_FN_WE0_FWE,
+        GPIO_FN_A4_FOE,         GPIO_FN_A5_FCDE,
+        GPIO_FN_D0_NAF0,        GPIO_FN_D1_NAF1,        GPIO_FN_D2_NAF2,
+        GPIO_FN_D3_NAF3,        GPIO_FN_D4_NAF4,        GPIO_FN_D5_NAF5,
+        GPIO_FN_D6_NAF6,        GPIO_FN_D7_NAF7,        GPIO_FN_D8_NAF8,
+        GPIO_FN_D9_NAF9,        GPIO_FN_D10_NAF10,      GPIO_FN_D11_NAF11,
+        GPIO_FN_D12_NAF12,      GPIO_FN_D13_NAF13,      GPIO_FN_D14_NAF14,
+        GPIO_FN_D15_NAF15,
+
+        /*
+         * MMCIF(1)             (PORT 84, 85, 86, 87, 88, 89,
+         *                            90, 91, 92, 99)
+         */
+        GPIO_FN_MMCD0_0,        GPIO_FN_MMCD0_1,        GPIO_FN_MMCD0_2,
+        GPIO_FN_MMCD0_3,        GPIO_FN_MMCD0_4,        GPIO_FN_MMCD0_5,
+        GPIO_FN_MMCD0_6,        GPIO_FN_MMCD0_7,
+        GPIO_FN_MMCCMD0,        GPIO_FN_MMCCLK0,
+
+        /* MMCIF(2)             (PORT 54, 55, 56, 57, 58, 59, 60, 61, 66, 67) */
+        GPIO_FN_MMCD1_0,        GPIO_FN_MMCD1_1,        GPIO_FN_MMCD1_2,
+        GPIO_FN_MMCD1_3,        GPIO_FN_MMCD1_4,        GPIO_FN_MMCD1_5,
+        GPIO_FN_MMCD1_6,        GPIO_FN_MMCD1_7,
+        GPIO_FN_MMCCLK1,        GPIO_FN_MMCCMD1,
+
+        /* SPU2         (PORT 65) */
+        GPIO_FN_VINT_I,
+
+        /* FLCTL        (PORT 66, 68, 73) */
+        GPIO_FN_FCE1,   GPIO_FN_FCE0,   GPIO_FN_FRB,
+
+        /* HSI          (PORT 76, 77, 78, 79, 80, 81, 82, 83) */
+        GPIO_FN_GP_RX_FLAG,     GPIO_FN_GP_RX_DATA,     GPIO_FN_GP_TX_READY,
+        GPIO_FN_GP_RX_WAKE,     GPIO_FN_MP_TX_FLAG,     GPIO_FN_MP_TX_DATA,
+        GPIO_FN_MP_RX_READY,    GPIO_FN_MP_TX_WAKE,
+
+        /*
+         * MFI          (PORT 76, 77, 78, 79,
+         *                    80, 81, 82, 83, 84, 85, 86, 87, 88, 89,
+         *                    90, 91, 92, 93, 94, 95, 96, 97, 98, 99)
+         */
+        GPIO_FN_MFIv6,  /* see MSEL4CR 6 */
+        GPIO_FN_MFIv4,  /* see MSEL4CR 6 */
+
+        GPIO_FN_MEMC_CS0,               GPIO_FN_MEMC_BUSCLK_MEMC_A0,
+        GPIO_FN_MEMC_CS1_MEMC_A1,       GPIO_FN_MEMC_ADV_MEMC_DREQ0,
+        GPIO_FN_MEMC_WAIT_MEMC_DREQ1,   GPIO_FN_MEMC_NOE,
+        GPIO_FN_MEMC_NWE,               GPIO_FN_MEMC_INT,
+
+        GPIO_FN_MEMC_AD0,       GPIO_FN_MEMC_AD1,       GPIO_FN_MEMC_AD2,
+        GPIO_FN_MEMC_AD3,       GPIO_FN_MEMC_AD4,       GPIO_FN_MEMC_AD5,
+        GPIO_FN_MEMC_AD6,       GPIO_FN_MEMC_AD7,       GPIO_FN_MEMC_AD8,
+        GPIO_FN_MEMC_AD9,       GPIO_FN_MEMC_AD10,      GPIO_FN_MEMC_AD11,
+        GPIO_FN_MEMC_AD12,      GPIO_FN_MEMC_AD13,      GPIO_FN_MEMC_AD14,
+        GPIO_FN_MEMC_AD15,
+
+        /* SIM          (PORT 94, 95, 98) */
+        GPIO_FN_SIM_RST,        GPIO_FN_SIM_CLK,        GPIO_FN_SIM_D,
+
+        /* TPU          (PORT 93, 99, 112, 160, 161) */
+        GPIO_FN_TPU0TO0,        GPIO_FN_TPU0TO1,
+        GPIO_FN_TPU0TO2_93,     GPIO_FN_TPU0TO2_99,
+        GPIO_FN_TPU0TO3,
+
+        /* I2C2         (PORT 110, 111) */
+        GPIO_FN_I2C_SCL2,       GPIO_FN_I2C_SDA2,
+
+        /* I2C3(1)      (PORT 114, 115) */
+        GPIO_FN_I2C_SCL3,       GPIO_FN_I2C_SDA3,
+
+        /* I2C3(2)      (PORT 137, 145) */
+        GPIO_FN_I2C_SCL3S,      GPIO_FN_I2C_SDA3S,
+
+        /* I2C4(2)      (PORT 116, 117) */
+        GPIO_FN_I2C_SCL4,       GPIO_FN_I2C_SDA4,
+
+        /* I2C4(2)      (PORT 146, 147) */
+        GPIO_FN_I2C_SCL4S,      GPIO_FN_I2C_SDA4S,
+
+        /*
+         * KEYSC        (PORT 121, 122, 123, 124, 125, 126, 127, 128, 129,
+         *                    130, 131, 132, 133, 134, 135, 136)
+         */
+        GPIO_FN_KEYOUT0,        GPIO_FN_KEYIN0_121,     GPIO_FN_KEYIN0_136,
+        GPIO_FN_KEYOUT1,        GPIO_FN_KEYIN1_122,     GPIO_FN_KEYIN1_135,
+        GPIO_FN_KEYOUT2,        GPIO_FN_KEYIN2_123,     GPIO_FN_KEYIN2_134,
+        GPIO_FN_KEYOUT3,        GPIO_FN_KEYIN3_124,     GPIO_FN_KEYIN3_133,
+        GPIO_FN_KEYOUT4,        GPIO_FN_KEYIN4,
+        GPIO_FN_KEYOUT5,        GPIO_FN_KEYIN5,
+        GPIO_FN_KEYOUT6,        GPIO_FN_KEYIN6,
+        GPIO_FN_KEYOUT7,        GPIO_FN_KEYIN7,
+
+        /*
+         * LCDC         (PORT      121, 122, 123, 124, 125, 126, 127, 128, 129,
+         *                    130, 131, 132, 133, 134, 135, 136, 137, 138, 139,
+         *                    140, 141, 142, 143, 144, 145, 146, 147, 148, 149,
+         *                    150, 151)
+         */
+        GPIO_FN_LCDC0_SELECT, /* LCDC 0 */
+        GPIO_FN_LCDC1_SELECT, /* LCDC 1 */
+        GPIO_FN_LCDHSYN,        GPIO_FN_LCDCS,  GPIO_FN_LCDVSYN,
+        GPIO_FN_LCDDCK,         GPIO_FN_LCDWR,  GPIO_FN_LCDRD,
+        GPIO_FN_LCDDISP,        GPIO_FN_LCDRS,  GPIO_FN_LCDLCLK,
+        GPIO_FN_LCDDON,
+
+        GPIO_FN_LCDD0,  GPIO_FN_LCDD1,  GPIO_FN_LCDD2,  GPIO_FN_LCDD3,
+        GPIO_FN_LCDD4,  GPIO_FN_LCDD5,  GPIO_FN_LCDD6,  GPIO_FN_LCDD7,
+        GPIO_FN_LCDD8,  GPIO_FN_LCDD9,  GPIO_FN_LCDD10, GPIO_FN_LCDD11,
+        GPIO_FN_LCDD12, GPIO_FN_LCDD13, GPIO_FN_LCDD14, GPIO_FN_LCDD15,
+        GPIO_FN_LCDD16, GPIO_FN_LCDD17, GPIO_FN_LCDD18, GPIO_FN_LCDD19,
+        GPIO_FN_LCDD20, GPIO_FN_LCDD21, GPIO_FN_LCDD22, GPIO_FN_LCDD23,
+
+        /* IRDA         (PORT 139, 140, 141, 142) */
+        GPIO_FN_IRDA_OUT,       GPIO_FN_IRDA_IN,        GPIO_FN_IRDA_FIRSEL,
+        GPIO_FN_IROUT_139,      GPIO_FN_IROUT_140,
+
+        /* TSIF1        (PORT 156, 157, 158, 159) */
+        GPIO_FN_TS0_1SELECT, /* TSIF0 - 1 select */
+        GPIO_FN_TS0_2SELECT, /* TSIF0 - 2 select */
+        GPIO_FN_TS1_1SELECT, /* TSIF1 - 1 select */
+        GPIO_FN_TS1_2SELECT, /* TSIF1 - 2 select */
+
+        GPIO_FN_TS_SPSYNC1,     GPIO_FN_TS_SDAT1,
+        GPIO_FN_TS_SDEN1,       GPIO_FN_TS_SCK1,
+
+        /* TSIF2        (PORT 137, 145, 146, 147) */
+        GPIO_FN_TS_SPSYNC2,     GPIO_FN_TS_SDAT2,
+        GPIO_FN_TS_SDEN2,       GPIO_FN_TS_SCK2,
+
+        /* HDMI         (PORT 169, 170) */
+        GPIO_FN_HDMI_HPD,       GPIO_FN_HDMI_CEC,
+
+        /* SDHI0        (PORT 171, 172, 173, 174, 175, 176, 177, 178) */
+        GPIO_FN_SDHICLK0,       GPIO_FN_SDHICD0,
+        GPIO_FN_SDHICMD0,       GPIO_FN_SDHIWP0,
+        GPIO_FN_SDHID0_0,       GPIO_FN_SDHID0_1,
+        GPIO_FN_SDHID0_2,       GPIO_FN_SDHID0_3,
+
+        /* SDHI1        (PORT 179, 180, 181, 182, 183, 184) */
+        GPIO_FN_SDHICLK1,       GPIO_FN_SDHICMD1,       GPIO_FN_SDHID1_0,
+        GPIO_FN_SDHID1_1,       GPIO_FN_SDHID1_2,       GPIO_FN_SDHID1_3,
+
+        /* SDHI2        (PORT 185, 186, 187, 188, 189, 190) */
+        GPIO_FN_SDHICLK2,       GPIO_FN_SDHICMD2,       GPIO_FN_SDHID2_0,
+        GPIO_FN_SDHID2_1,       GPIO_FN_SDHID2_2,       GPIO_FN_SDHID2_3,
+
+        /* SDENC        see MSEL4CR 19 */
+        GPIO_FN_SDENC_CPG,
+        GPIO_FN_SDENC_DV_CLKI,
+};
+
+#endif /* __ASM_SH7372_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/sh7377.h b/arch/arm/mach-shmobile/include/mach/sh7377.h
new file mode 100644
index 00000000000..f580e227dd1
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh7377.h
@@ -0,0 +1,360 @@
+#ifndef __ASM_SH7377_H__
+#define __ASM_SH7377_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+        /* 55-1 -> 55-5 (GPIO) */
+        GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+        GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+        GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+        GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+        GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+        GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+        GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+        GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+        GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+        GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+        GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+        GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+        GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+        GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+        GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+        GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+        GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+        GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+        GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+        GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+        GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+        GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+        GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+        GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+        GPIO_PORT128, GPIO_PORT129,
+
+        GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+        GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+        GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+        GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+        GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+        GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+        GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+        GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+        GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+        GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+        GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+        GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+        GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+        GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+        GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+        GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+        GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+        GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+        GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+        GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+        GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+        GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+
+        /* Special Pull-up / Pull-down Functions */
+        GPIO_FN_PORT66_KEYIN0_PU, GPIO_FN_PORT67_KEYIN1_PU,
+        GPIO_FN_PORT68_KEYIN2_PU, GPIO_FN_PORT69_KEYIN3_PU,
+        GPIO_FN_PORT70_KEYIN4_PU, GPIO_FN_PORT71_KEYIN5_PU,
+        GPIO_FN_PORT72_KEYIN6_PU,
+
+        /* 55-1 (FN) */
+        GPIO_FN_VBUS_0,
+        GPIO_FN_CPORT0,
+        GPIO_FN_CPORT1,
+        GPIO_FN_CPORT2,
+        GPIO_FN_CPORT3,
+        GPIO_FN_CPORT4,
+        GPIO_FN_CPORT5,
+        GPIO_FN_CPORT6,
+        GPIO_FN_CPORT7,
+        GPIO_FN_CPORT8,
+        GPIO_FN_CPORT9,
+        GPIO_FN_CPORT10,
+        GPIO_FN_CPORT11, GPIO_FN_SIN2,
+        GPIO_FN_CPORT12, GPIO_FN_XCTS2,
+        GPIO_FN_CPORT13, GPIO_FN_RFSPO4,
+        GPIO_FN_CPORT14, GPIO_FN_RFSPO5,
+        GPIO_FN_CPORT15, GPIO_FN_SCIFA0_SCK, GPIO_FN_GPS_AGC2,
+        GPIO_FN_CPORT16, GPIO_FN_SCIFA0_TXD, GPIO_FN_GPS_AGC3,
+        GPIO_FN_CPORT17_IC_OE, GPIO_FN_SOUT2,
+        GPIO_FN_CPORT18, GPIO_FN_XRTS2, GPIO_FN_PORT19_VIO_CKO2,
+        GPIO_FN_CPORT19_MPORT1,
+        GPIO_FN_CPORT20, GPIO_FN_RFSPO6,
+        GPIO_FN_CPORT21, GPIO_FN_STATUS0,
+        GPIO_FN_CPORT22, GPIO_FN_STATUS1,
+        GPIO_FN_CPORT23, GPIO_FN_STATUS2, GPIO_FN_RFSPO7,
+        GPIO_FN_B_SYNLD1,
+        GPIO_FN_B_SYNLD2, GPIO_FN_SYSENMSK,
+        GPIO_FN_XMAINPS,
+        GPIO_FN_XDIVPS,
+        GPIO_FN_XIDRST,
+        GPIO_FN_IDCLK, GPIO_FN_IC_DP,
+        GPIO_FN_IDIO, GPIO_FN_IC_DM,
+        GPIO_FN_SOUT1, GPIO_FN_SCIFA4_TXD, GPIO_FN_M02_BERDAT,
+        GPIO_FN_SIN1, GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+        GPIO_FN_XRTS1, GPIO_FN_SCIFA4_RTS, GPIO_FN_M03_BERCLK,
+        GPIO_FN_XCTS1, GPIO_FN_SCIFA4_CTS,
+        GPIO_FN_PCMCLKO,
+        GPIO_FN_SYNC8KO,
+
+        /* 55-2 (FN) */
+        GPIO_FN_DNPCM_A,
+        GPIO_FN_UPPCM_A,
+        GPIO_FN_VACK,
+        GPIO_FN_XTALB1L,
+        GPIO_FN_GPS_AGC1, GPIO_FN_SCIFA0_RTS,
+        GPIO_FN_GPS_AGC4, GPIO_FN_SCIFA0_RXD,
+        GPIO_FN_GPS_PWRDOWN, GPIO_FN_SCIFA0_CTS,
+        GPIO_FN_GPS_IM,
+        GPIO_FN_GPS_IS,
+        GPIO_FN_GPS_QM,
+        GPIO_FN_GPS_QS,
+        GPIO_FN_FMSOCK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT,
+        GPIO_FN_FMSOOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_IPORT3,
+        GPIO_FN_FMSIOLR,
+        GPIO_FN_FMSOOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_OPORT1,
+        GPIO_FN_FMSIOBT,
+        GPIO_FN_FMSOSLD, GPIO_FN_BBIF2_TXD2, GPIO_FN_OPORT2,
+        GPIO_FN_FMSOILR, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3,
+        GPIO_FN_OPORT3, GPIO_FN_FMSIILR,
+        GPIO_FN_FMSOIBT, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2,
+        GPIO_FN_FMSIIBT,
+        GPIO_FN_FMSISLD, GPIO_FN_MFG0_OUT1, GPIO_FN_TPU0TO0,
+        GPIO_FN_A0_EA0, GPIO_FN_BS,
+        GPIO_FN_A12_EA12, GPIO_FN_PORT58_VIO_CKOR, GPIO_FN_TPU4TO2,
+        GPIO_FN_A13_EA13, GPIO_FN_PORT59_IROUT, GPIO_FN_MFG0_OUT2,
+        GPIO_FN_TPU0TO1,
+        GPIO_FN_A14_EA14, GPIO_FN_PORT60_KEYOUT5,
+        GPIO_FN_A15_EA15, GPIO_FN_PORT61_KEYOUT4,
+        GPIO_FN_A16_EA16, GPIO_FN_PORT62_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+        GPIO_FN_A17_EA17, GPIO_FN_PORT63_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+        GPIO_FN_A18_EA18, GPIO_FN_PORT64_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+        GPIO_FN_A19_EA19, GPIO_FN_PORT65_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+        GPIO_FN_A20_EA20, GPIO_FN_PORT66_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+        GPIO_FN_A21_EA21, GPIO_FN_PORT67_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+        GPIO_FN_A22_EA22, GPIO_FN_PORT68_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+        GPIO_FN_A23_EA23, GPIO_FN_PORT69_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+        GPIO_FN_A24_EA24, GPIO_FN_PORT70_KEYIN4, GPIO_FN_MSIOF0_RXD,
+        GPIO_FN_A25_EA25, GPIO_FN_PORT71_KEYIN5, GPIO_FN_MSIOF0_SS2,
+        GPIO_FN_A26, GPIO_FN_PORT72_KEYIN6,
+        GPIO_FN_D0_ED0_NAF0,
+        GPIO_FN_D1_ED1_NAF1,
+        GPIO_FN_D2_ED2_NAF2,
+        GPIO_FN_D3_ED3_NAF3,
+        GPIO_FN_D4_ED4_NAF4,
+        GPIO_FN_D5_ED5_NAF5,
+        GPIO_FN_D6_ED6_NAF6,
+        GPIO_FN_D7_ED7_NAF7,
+        GPIO_FN_D8_ED8_NAF8,
+        GPIO_FN_D9_ED9_NAF9,
+        GPIO_FN_D10_ED10_NAF10,
+        GPIO_FN_D11_ED11_NAF11,
+        GPIO_FN_D12_ED12_NAF12,
+        GPIO_FN_D13_ED13_NAF13,
+        GPIO_FN_D14_ED14_NAF14,
+        GPIO_FN_D15_ED15_NAF15,
+        GPIO_FN_CS4,
+        GPIO_FN_CS5A, GPIO_FN_FMSICK,
+        GPIO_FN_CS5B, GPIO_FN_FCE1,
+
+        /* 55-3 (FN) */
+        GPIO_FN_CS6B, GPIO_FN_XCS2, GPIO_FN_CS6A, GPIO_FN_DACK0,
+        GPIO_FN_FCE0,
+        GPIO_FN_WAIT, GPIO_FN_DREQ0,
+        GPIO_FN_RD_XRD,
+        GPIO_FN_WE0_XWR0_FWE,
+        GPIO_FN_WE1_XWR1,
+        GPIO_FN_FRB,
+        GPIO_FN_CKO,
+        GPIO_FN_NBRSTOUT,
+        GPIO_FN_NBRST,
+        GPIO_FN_GPS_EPPSIN,
+        GPIO_FN_LATCHPULSE,
+        GPIO_FN_LTESIGNAL,
+        GPIO_FN_LEGACYSTATE,
+        GPIO_FN_TCKON,
+        GPIO_FN_VIO_VD, GPIO_FN_PORT128_KEYOUT0, GPIO_FN_IPORT0,
+        GPIO_FN_VIO_HD, GPIO_FN_PORT129_KEYOUT1, GPIO_FN_IPORT1,
+        GPIO_FN_VIO_D0, GPIO_FN_PORT130_KEYOUT2, GPIO_FN_PORT130_MSIOF2_RXD,
+        GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT3, GPIO_FN_PORT131_MSIOF2_SS1,
+        GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT4, GPIO_FN_PORT132_MSIOF2_SS2,
+        GPIO_FN_VIO_D3, GPIO_FN_PORT133_KEYOUT5, GPIO_FN_PORT133_MSIOF2_TSYNC,
+        GPIO_FN_VIO_D4, GPIO_FN_PORT134_KEYIN0, GPIO_FN_PORT134_MSIOF2_TXD,
+        GPIO_FN_VIO_D5, GPIO_FN_PORT135_KEYIN1, GPIO_FN_PORT135_MSIOF2_TSCK,
+        GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYIN2,
+        GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYIN3,
+        GPIO_FN_VIO_D8, GPIO_FN_M9_SLCD_A01, GPIO_FN_PORT138_FSIAOMC,
+        GPIO_FN_VIO_D9, GPIO_FN_M10_SLCD_CK1, GPIO_FN_PORT139_FSIAOLR,
+        GPIO_FN_VIO_D10, GPIO_FN_M11_SLCD_SO1, GPIO_FN_TPU0TO2,
+        GPIO_FN_PORT140_FSIAOBT,
+        GPIO_FN_VIO_D11, GPIO_FN_M12_SLCD_CE1, GPIO_FN_TPU0TO3,
+        GPIO_FN_PORT141_FSIAOSLD,
+        GPIO_FN_VIO_D12, GPIO_FN_M13_BSW, GPIO_FN_PORT142_FSIACK,
+        GPIO_FN_VIO_D13, GPIO_FN_M14_GSW, GPIO_FN_PORT143_FSIAILR,
+        GPIO_FN_VIO_D14, GPIO_FN_M15_RSW, GPIO_FN_PORT144_FSIAIBT,
+        GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_FSIAISLD,
+        GPIO_FN_VIO_CLK, GPIO_FN_PORT146_KEYIN4, GPIO_FN_IPORT2,
+        GPIO_FN_VIO_FIELD, GPIO_FN_PORT147_KEYIN5,
+        GPIO_FN_VIO_CKO, GPIO_FN_PORT148_KEYIN6,
+        GPIO_FN_A27, GPIO_FN_RDWR_XWE, GPIO_FN_MFG0_IN1,
+        GPIO_FN_MFG0_IN2,
+        GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+        GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+        GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+        GPIO_FN_SOUT3, GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+        GPIO_FN_SIN3, GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+        GPIO_FN_XRTS3, GPIO_FN_SCIFA2_RTS1, GPIO_FN_PORT156_MSIOF2_SS2,
+        GPIO_FN_XCTS3, GPIO_FN_SCIFA2_CTS1, GPIO_FN_PORT157_MSIOF2_RXD,
+
+        /* 55-4 (FN) */
+        GPIO_FN_DINT, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+        GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+        GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD, GPIO_FN_SOUT0,
+        GPIO_FN_PORT161_SCIFB_CTS, GPIO_FN_PORT161_SCIFA5_CTS, GPIO_FN_XCTS0,
+        GPIO_FN_MFG3_IN2,
+        GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD, GPIO_FN_SIN0,
+        GPIO_FN_MFG3_IN1,
+        GPIO_FN_PORT163_SCIFB_RTS, GPIO_FN_PORT163_SCIFA5_RTS, GPIO_FN_XRTS0,
+        GPIO_FN_MFG3_OUT1,
+        GPIO_FN_TPU3TO0,
+        GPIO_FN_LCDD0, GPIO_FN_PORT192_KEYOUT0, GPIO_FN_EXT_CKI,
+        GPIO_FN_LCDD1, GPIO_FN_PORT193_KEYOUT1, GPIO_FN_PORT193_SCIFA5_CTS,
+        GPIO_FN_BBIF2_TSYNC1,
+        GPIO_FN_LCDD2, GPIO_FN_PORT194_KEYOUT2, GPIO_FN_PORT194_SCIFA5_RTS,
+        GPIO_FN_BBIF2_TSCK1,
+        GPIO_FN_LCDD3, GPIO_FN_PORT195_KEYOUT3, GPIO_FN_PORT195_SCIFA5_RXD,
+        GPIO_FN_BBIF2_TXD1,
+        GPIO_FN_LCDD4, GPIO_FN_PORT196_KEYOUT4, GPIO_FN_PORT196_SCIFA5_TXD,
+        GPIO_FN_LCDD5, GPIO_FN_PORT197_KEYOUT5, GPIO_FN_PORT197_SCIFA5_SCK,
+        GPIO_FN_MFG2_OUT2, GPIO_FN_TPU2TO1,
+        GPIO_FN_LCDD6, GPIO_FN_XWR2,
+        GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2, GPIO_FN_XWR3,
+        GPIO_FN_LCDD8, GPIO_FN_PORT200_KEYIN0, GPIO_FN_VIO_DR0, GPIO_FN_D16,
+        GPIO_FN_ED16,
+        GPIO_FN_LCDD9, GPIO_FN_PORT201_KEYIN1, GPIO_FN_VIO_DR1, GPIO_FN_D17,
+        GPIO_FN_ED17,
+        GPIO_FN_LCDD10, GPIO_FN_PORT202_KEYIN2, GPIO_FN_VIO_DR2, GPIO_FN_D18,
+        GPIO_FN_ED18,
+        GPIO_FN_LCDD11, GPIO_FN_PORT203_KEYIN3, GPIO_FN_VIO_DR3, GPIO_FN_D19,
+        GPIO_FN_ED19,
+        GPIO_FN_LCDD12, GPIO_FN_PORT204_KEYIN4, GPIO_FN_VIO_DR4, GPIO_FN_D20,
+        GPIO_FN_ED20,
+        GPIO_FN_LCDD13, GPIO_FN_PORT205_KEYIN5, GPIO_FN_VIO_DR5, GPIO_FN_D21,
+        GPIO_FN_ED21,
+        GPIO_FN_LCDD14, GPIO_FN_PORT206_KEYIN6, GPIO_FN_VIO_DR6, GPIO_FN_D22,
+        GPIO_FN_ED22,
+        GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_PORT207_KEYOUT0,
+        GPIO_FN_VIO_DR7,
+        GPIO_FN_D23, GPIO_FN_ED23,
+        GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_PORT208_KEYOUT1,
+        GPIO_FN_VIO_VDR,
+        GPIO_FN_D24, GPIO_FN_ED24,
+        GPIO_FN_LCDD17, GPIO_FN_PORT209_KEYOUT2, GPIO_FN_VIO_HDR, GPIO_FN_D25,
+        GPIO_FN_ED25,
+        GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+        GPIO_FN_ED26,
+        GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27, GPIO_FN_ED27,
+        GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+        GPIO_FN_ED28,
+        GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+        GPIO_FN_ED29,
+        GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+        GPIO_FN_ED30,
+        GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+        GPIO_FN_ED31,
+        GPIO_FN_LCDDCK, GPIO_FN_LCDWR, GPIO_FN_PORT216_KEYOUT3,
+        GPIO_FN_VIO_CLKR,
+        GPIO_FN_LCDRD, GPIO_FN_DACK2, GPIO_FN_MSIOF0L_TSYNC,
+        GPIO_FN_LCDHSYN, GPIO_FN_LCDCS, GPIO_FN_LCDCS2, GPIO_FN_DACK3,
+        GPIO_FN_PORT218_VIO_CKOR, GPIO_FN_PORT218_KEYOUT4,
+        GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK,
+        GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2, GPIO_FN_PORT220_KEYOUT5,
+        GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD,
+        GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN,
+        GPIO_FN_MSIOF0L_TXD,
+        GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+        GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_USBTERM,
+        GPIO_FN_PORT226_VIO_CKO2,
+        GPIO_FN_SCIFA1_RTS, GPIO_FN_IDIN,
+        GPIO_FN_SCIFA1_RXD,
+        GPIO_FN_SCIFA1_CTS, GPIO_FN_MFG1_IN1,
+        GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2, GPIO_FN_PORT230_FSIAOMC,
+        GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2, GPIO_FN_PORT231_FSIAOLR,
+        GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2, GPIO_FN_PORT232_FSIAOBT,
+        GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2, GPIO_FN_GPS_VCOTRIG,
+        GPIO_FN_PORT233_FSIACK,
+        GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2, GPIO_FN_PORT234_FSIAOSLD,
+        GPIO_FN_MSIOF1_RSYNC, GPIO_FN_OPORT0, GPIO_FN_MFG1_IN2,
+        GPIO_FN_PORT235_FSIAILR,
+        GPIO_FN_MSIOF1_MCK0, GPIO_FN_I2C_SDA2, GPIO_FN_PORT236_FSIAIBT,
+        GPIO_FN_MSIOF1_MCK1, GPIO_FN_I2C_SCL2, GPIO_FN_PORT237_FSIAISLD,
+        GPIO_FN_MSIOF1_SS1, GPIO_FN_EDBGREQ3,
+
+        /* 55-5 (FN) */
+        GPIO_FN_MSIOF1_SS2,
+        GPIO_FN_SCIFA6_TXD,
+        GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1,
+        GPIO_FN_TPU4TO0,
+        GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+        GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+        GPIO_FN_PORT244_SCIFA5_CTS, GPIO_FN_MFG2_IN1, GPIO_FN_PORT244_SCIFB_CTS,
+        GPIO_FN_PORT244_MSIOF2_RXD,
+        GPIO_FN_PORT245_SCIFA5_RTS, GPIO_FN_MFG2_IN2, GPIO_FN_PORT245_SCIFB_RTS,
+        GPIO_FN_PORT245_MSIOF2_TXD,
+        GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1,
+        GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+        GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2,
+        GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+        GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1,
+        GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0,
+        GPIO_FN_PORT248_MSIOF2_TSCK,
+        GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, GPIO_FN_PORT249_MSIOF2_TSYNC,
+        GPIO_FN_SDHICLK0, GPIO_FN_TCK2_SWCLK_MC0,
+        GPIO_FN_SDHICD0,
+        GPIO_FN_SDHID0_0, GPIO_FN_TMS2_SWDIO_MC0,
+        GPIO_FN_SDHID0_1, GPIO_FN_TDO2_SWO0_MC0,
+        GPIO_FN_SDHID0_2, GPIO_FN_TDI2,
+        GPIO_FN_SDHID0_3, GPIO_FN_RTCK2_SWO1_MC0,
+        GPIO_FN_SDHICMD0, GPIO_FN_TRST2,
+        GPIO_FN_SDHIWP0, GPIO_FN_EDBGREQ2,
+        GPIO_FN_SDHICLK1, GPIO_FN_TCK3_SWCLK_MC1,
+        GPIO_FN_SDHID1_0, GPIO_FN_M11_SLCD_SO2, GPIO_FN_TS_SPSYNC2,
+        GPIO_FN_TMS3_SWDIO_MC1,
+        GPIO_FN_SDHID1_1, GPIO_FN_M9_SLCD_A02, GPIO_FN_TS_SDAT2,
+        GPIO_FN_TDO3_SWO0_MC1,
+        GPIO_FN_SDHID1_2, GPIO_FN_M10_SLCD_CK2, GPIO_FN_TS_SDEN2, GPIO_FN_TDI3,
+        GPIO_FN_SDHID1_3, GPIO_FN_M12_SLCD_CE2, GPIO_FN_TS_SCK2,
+        GPIO_FN_RTCK3_SWO1_MC1,
+        GPIO_FN_SDHICMD1, GPIO_FN_TRST3,
+        GPIO_FN_RESETOUTS,
+};
+
+#endif /* __ASM_SH7377_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
new file mode 100644
index 00000000000..76a687eeaa2
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+        cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/timex.h b/arch/arm/mach-shmobile/include/mach/timex.h
new file mode 100644
index 00000000000..ae0d8d825c2
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_TIMEX_H
+#define __ASM_MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE         1193180 /* unused i8253 PIT value */
+
+#endif /* __ASM_MACH_TIMEX_H */
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
new file mode 100644
index 00000000000..0bd7556b138
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_MACH_UNCOMPRESS_H
+#define __ASM_MACH_UNCOMPRESS_H
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog()
+
+#endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
new file mode 100644
index 00000000000..fb3c4f1ab25
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_MACH_VMALLOC_H
+#define __ASM_MACH_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x24000000)
+
+#endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7367.c b/arch/arm/mach-shmobile/intc-sh7367.c
new file mode 100644
index 00000000000..6a547b47aab
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7367.c
@@ -0,0 +1,270 @@
+/*
+ * sh7367 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+        UNUSED_INTCA = 0,
+
+        /* interrupt sources INTCA */
+        IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+        IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+        DIRC,
+        CRYPT1_ERR, CRYPT2_STD,
+        IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+        ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMRX,
+        ETM11_ACQCMP, ETM11_FULL,
+        MFI_MFIM, MFI_MFIS,
+        BBIF1, BBIF2,
+        USBDMAC_USHDMI,
+        USBHS_USHI0, USBHS_USHI1,
+        CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+        KEYSC_KEY,
+        SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+        MSIOF2, MSIOF1,
+        SCIFA4, SCIFA5, SCIFB,
+        FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+        SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+        SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+        MSU_MSU, MSU_MSU2,
+        IREM,
+        SIU,
+        SPU,
+        IRDA,
+        TPU0, TPU1, TPU2, TPU3, TPU4,
+        LCRC,
+        PINT1, PINT2,
+        TTI20,
+        MISTY,
+        DDM,
+        SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+        RWDT0, RWDT1,
+        DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+        DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+        DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+        DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+        DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+        DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+
+        /* interrupt groups INTCA */
+        DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2,
+        ETM11, ARM11, USBHS, FLCTL, IIC1, SDHI0, SDHI1, SDHI2,
+};
+
+static struct intc_vect intca_vectors[] = {
+        INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+        INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+        INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+        INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+        INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+        INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+        INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+        INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+        INTC_VECT(DIRC, 0x0560),
+        INTC_VECT(CRYPT1_ERR, 0x05e0),
+        INTC_VECT(CRYPT2_STD, 0x0700),
+        INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+        INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+        INTC_VECT(ARM11_IRQPMU, 0x0800), INTC_VECT(ARM11_COMMTX, 0x0840),
+        INTC_VECT(ARM11_COMMRX, 0x0860),
+        INTC_VECT(ETM11_ACQCMP, 0x0880), INTC_VECT(ETM11_FULL, 0x08a0),
+        INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+        INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+        INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+        INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+        INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+        INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+        INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+        INTC_VECT(KEYSC_KEY, 0x0be0),
+        INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+        INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+        INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+        INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+        INTC_VECT(SCIFB, 0x0d60),
+        INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+        INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+        INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+        INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+        INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+        INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+        INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+        INTC_VECT(IREM, 0x0f60),
+        INTC_VECT(SIU, 0x0fa0),
+        INTC_VECT(SPU, 0x0fc0),
+        INTC_VECT(IRDA, 0x0480),
+        INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+        INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+        INTC_VECT(TPU4, 0x0520),
+        INTC_VECT(LCRC, 0x0540),
+        INTC_VECT(PINT1, 0x1000), INTC_VECT(PINT2, 0x1020),
+        INTC_VECT(TTI20, 0x1100),
+        INTC_VECT(MISTY, 0x1120),
+        INTC_VECT(DDM, 0x1140),
+        INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+        INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+        INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+        INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+        INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+        INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+        INTC_VECT(DMAC_2_DADERR, 0x20c0),
+        INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+        INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+        INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+        INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+        INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+        INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+        INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+        INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+        INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+                   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+        INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+                   DMAC_2_DEI5, DMAC_2_DADERR),
+        INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+                   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+        INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+                   DMAC2_2_DEI5, DMAC2_2_DADERR),
+        INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+                   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+        INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+                   DMAC3_2_DEI5, DMAC3_2_DADERR),
+        INTC_GROUP(ETM11, ETM11_ACQCMP, ETM11_FULL),
+        INTC_GROUP(ARM11, ARM11_IRQPMU, ARM11_COMMTX, ARM11_COMMTX),
+        INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+        INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+                   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+        INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+        INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+                   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+        INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+                   SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+        INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+                   SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+        { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+          { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+            ARM11_IRQPMU, 0, ARM11_COMMTX, ARM11_COMMRX } },
+        { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+          { CRYPT1_ERR, CRYPT2_STD, DIRC, 0,
+            DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+        { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+          { PINT1, PINT2, 0, 0,
+            BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+        { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+          { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+            DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+        { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+          { DDM, 0, 0, 0,
+            0, 0, ETM11_FULL, ETM11_ACQCMP } },
+        { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+          { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+            SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+        { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+          { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+            0, 0, MSIOF2, 0 } },
+        { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+          { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+            FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+        { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+          { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+            TTI20, USBDMAC_USHDMI, SPU, SIU } },
+        { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+          { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+            CMT2, USBHS_USHI1, USBHS_USHI0, 0 } },
+        { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+          { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+            0, 0, 0, 0 } },
+        { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+          { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+            LCRC, MSU_MSU2, IREM, MSU_MSU } },
+        { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+          { 0, 0, TPU0, TPU1,
+            TPU2, TPU3, TPU4, 0 } },
+        { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+          { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+            MISTY, CMT3, RWDT1, RWDT0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+        { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+
+        { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+        { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, ETM11, BBIF1, BBIF2 } },
+        { 0xe6940008, 0, 16, 4, /* IPRCA */ { CRYPT1_ERR, CRYPT2_STD,
+                                              CMT1_CMT11, ARM11 } },
+        { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINT1, PINT2,
+                                              CMT1_CMT12, TPU4 } },
+        { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+                                              MFI_MFIM, USBHS } },
+        { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+                                              0, CMT1_CMT10 } },
+        { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+                                              SCIFA2, SCIFA3 } },
+        { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+                                              FLCTL, SDHI0 } },
+        { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+        { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, SIU, TTI20 } },
+        { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IREM, SDHI1 } },
+        { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+        { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+        { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, SPU, DDM } },
+        { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+        { 0xe6900000, 16, 2, /* ICR1A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900004, 16, 2, /* ICR2A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+        { 0xe6900020, 0, 8, /* INTREQ00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900024, 0, 8, /* INTREQ10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7367-intca",
+                             intca_vectors, intca_groups,
+                             intca_mask_registers, intca_prio_registers,
+                             intca_sense_registers, intca_ack_registers);
+
+void __init sh7367_init_irq(void)
+{
+        /* INTCA */
+        register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
new file mode 100644
index 00000000000..c57a923f97a
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -0,0 +1,369 @@
+/*
+ * sh7372 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+        UNUSED_INTCA = 0,
+
+        /* interrupt sources INTCA */
+        IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+        IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+        IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+        IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+        DIRC,
+        CRYPT_STD,
+        IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+        AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+        MFI_MFIM, MFI_MFIS,
+        BBIF1, BBIF2,
+        USBHSDMAC0_USHDMI,
+        _3DG_SGX540,
+        CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+        KEYSC_KEY,
+        SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+        MSIOF2, MSIOF1,
+        SCIFA4, SCIFA5, SCIFB,
+        FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+        SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+        SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2,
+        IRREM,
+        IRDA,
+        TPU0,
+        TTI20,
+        DDM,
+        SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3,
+        RWDT0,
+        DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3,
+        DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR,
+        DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+        DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+        DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+        DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+        SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+        HDMI,
+        SPU2_SPU0, SPU2_SPU1,
+        FSI, FMSI,
+        MIPI_HSI,
+        IPMMU_IPMMUD,
+        CEC_1, CEC_2,
+        AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+        MFIS2,
+        CPORTR2S,
+        CMT14, CMT15,
+        MMC_MMC_ERR, MMC_MMC_NOR,
+        IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+        IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3,
+        USB0_USB0I1, USB0_USB0I0,
+        USB1_USB1I1, USB1_USB1I0,
+        USBHSDMAC1_USHDMI,
+
+        /* interrupt groups INTCA */
+        DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+        AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2
+};
+
+static struct intc_vect intca_vectors[] __initdata = {
+        INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+        INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+        INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+        INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+        INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+        INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+        INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+        INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+        INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+        INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+        INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+        INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+        INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+        INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+        INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+        INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+        INTC_VECT(DIRC, 0x0560),
+        INTC_VECT(CRYPT_STD, 0x0700),
+        INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+        INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+        INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+        INTC_VECT(AP_ARM_COMMRX, 0x0860),
+        INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+        INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+        INTC_VECT(USBHSDMAC0_USHDMI, 0x0a00),
+        INTC_VECT(_3DG_SGX540, 0x0a60),
+        INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+        INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+        INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+        INTC_VECT(KEYSC_KEY, 0x0be0),
+        INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+        INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+        INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+        INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+        INTC_VECT(SCIFB, 0x0d60),
+        INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+        INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+        INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+        INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+        INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+        INTC_VECT(SDHI1_SDHI1I2, 0x0ec0),
+        INTC_VECT(IRREM, 0x0f60),
+        INTC_VECT(IRDA, 0x0480),
+        INTC_VECT(TPU0, 0x04a0),
+        INTC_VECT(TTI20, 0x1100),
+        INTC_VECT(DDM, 0x1140),
+        INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220),
+        INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260),
+        INTC_VECT(RWDT0, 0x1280),
+        INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020),
+        INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060),
+        INTC_VECT(DMAC1_2_DEI4, 0x2080), INTC_VECT(DMAC1_2_DEI5, 0x20a0),
+        INTC_VECT(DMAC1_2_DADERR, 0x20c0),
+        INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+        INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+        INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+        INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+        INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+        INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+        INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+        INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+        INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1320),
+        INTC_VECT(SHWYSTAT_COM, 0x1340),
+        INTC_VECT(HDMI, 0x17e0),
+        INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+        INTC_VECT(FSI, 0x1840),
+        INTC_VECT(FMSI, 0x1860),
+        INTC_VECT(MIPI_HSI, 0x18e0),
+        INTC_VECT(IPMMU_IPMMUD, 0x1920),
+        INTC_VECT(CEC_1, 0x1940), INTC_VECT(CEC_2, 0x1960),
+        INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+        INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+        INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+        INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+        INTC_VECT(MFIS2, 0x1a00),
+        INTC_VECT(CPORTR2S, 0x1a20),
+        INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+        INTC_VECT(MMC_MMC_ERR, 0x1ac0), INTC_VECT(MMC_MMC_NOR, 0x1ae0),
+        INTC_VECT(IIC4_ALI4, 0x1b00), INTC_VECT(IIC4_TACKI4, 0x1b20),
+        INTC_VECT(IIC4_WAITI4, 0x1b40), INTC_VECT(IIC4_DTEI4, 0x1b60),
+        INTC_VECT(IIC3_ALI3, 0x1b80), INTC_VECT(IIC3_TACKI3, 0x1ba0),
+        INTC_VECT(IIC3_WAITI3, 0x1bc0), INTC_VECT(IIC3_DTEI3, 0x1be0),
+        INTC_VECT(USB0_USB0I1, 0x1c80), INTC_VECT(USB0_USB0I0, 0x1ca0),
+        INTC_VECT(USB1_USB1I1, 0x1cc0), INTC_VECT(USB1_USB1I0, 0x1ce0),
+        INTC_VECT(USBHSDMAC1_USHDMI, 0x1d00),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+        INTC_GROUP(DMAC1_1, DMAC1_1_DEI0,
+                   DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3),
+        INTC_GROUP(DMAC1_2, DMAC1_2_DEI4,
+                   DMAC1_2_DEI5, DMAC1_2_DADERR),
+        INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+                   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+        INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+                   DMAC2_2_DEI5, DMAC2_2_DADERR),
+        INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+                   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+        INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+                   DMAC3_2_DEI5, DMAC3_2_DADERR),
+        INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX),
+        INTC_GROUP(AP_ARM2, AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+                   AP_ARM_DMAIRQ, AP_ARM_DMASIRQ),
+        INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+        INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+                   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+        INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+        INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+                   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+        INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+                   SDHI1_SDHI1I2),
+        INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1,
+                   SDHI2_SDHI2I2, SDHI2_SDHI2I3),
+        INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+};
+
+static struct intc_mask_reg intca_mask_registers[] __initdata = {
+        { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+        { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+          { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+            AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+        { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+          { 0, CRYPT_STD, DIRC, 0,
+            DMAC1_1_DEI3, DMAC1_1_DEI2, DMAC1_1_DEI1, DMAC1_1_DEI0 } },
+        { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+          { 0, 0, 0, 0,
+            BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+        { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+          { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+            DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+        { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+          { DDM, 0, 0, 0,
+            0, 0, 0, 0 } },
+        { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+          { KEYSC_KEY, DMAC1_2_DADERR, DMAC1_2_DEI5, DMAC1_2_DEI4,
+            SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+        { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+          { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+            0, 0, MSIOF2, 0 } },
+        { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+          { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+            FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+        { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+          { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+            TTI20, USBHSDMAC0_USHDMI, 0, 0 } },
+        { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+          { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+            CMT2, 0, 0, _3DG_SGX540 } },
+        { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+          { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+            0, 0, 0, 0 } },
+        { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+          { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+            0, 0, IRREM, 0 } },
+        { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+          { 0, 0, TPU0, 0,
+            0, 0, 0, 0 } },
+        { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+          { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0,
+            0, CMT3, 0, RWDT0 } },
+        { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+          { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+            0, 0, 0, 0 } },
+        { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+          { 0, 0, 0, 0,
+            0, 0, 0, HDMI } },
+        { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+          { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+            0, 0, 0, MIPI_HSI } },
+        { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+          { 0, IPMMU_IPMMUD, CEC_1, CEC_2,
+            AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+            AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+        { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+          { MFIS2, CPORTR2S, CMT14, CMT15,
+            0, 0, MMC_MMC_ERR, MMC_MMC_NOR } },
+        { 0xe69500a0, 0xe69500e0, 8, /* IMR8A3 / IMCR8A3 */
+          { IIC4_ALI4, IIC4_TACKI4, IIC4_WAITI4, IIC4_DTEI4,
+            IIC3_ALI3, IIC3_TACKI3, IIC3_WAITI3, IIC3_DTEI3 } },
+        { 0xe69500a4, 0xe69500e4, 8, /* IMR9A3 / IMCR9A3 */
+          { 0, 0, 0, 0,
+            USB0_USB0I1, USB0_USB0I0, USB1_USB1I1, USB1_USB1I0 } },
+        { 0xe69500a8, 0xe69500e8, 8, /* IMR10A3 / IMCR10A3 */
+          { USBHSDMAC1_USHDMI, 0, 0, 0,
+            0, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] __initdata = {
+        { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900018, 0, 32, 4, /* INTPRI20A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690001c, 0, 32, 4, /* INTPRI30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+        { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, 0 } },
+        { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+        { 0xe6940008, 0, 16, 4, /* IPRCA */ { 0, CRYPT_STD,
+                                              CMT1_CMT11, AP_ARM1 } },
+        { 0xe694000c, 0, 16, 4, /* IPRDA */ { 0, 0,
+                                              CMT1_CMT12, 0 } },
+        { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC1_1, MFI_MFIS,
+                                              MFI_MFIM, 0 } },
+        { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC1_2,
+                                              _3DG_SGX540, CMT1_CMT10 } },
+        { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+                                              SCIFA2, SCIFA3 } },
+        { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBHSDMAC0_USHDMI,
+                                              FLCTL, SDHI0 } },
+        { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4,
+                                              0/* MSU */, IIC1 } },
+        { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2,
+                                              0/* MSUG */, TTI20 } },
+        { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+        { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, 0, 0, 0 } },
+        { 0xe6940030, 0, 16, 4, /* IPRMA */ { 0, CMT3, 0, RWDT0 } },
+        { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+        { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, SDHI2 } },
+        { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+        { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { 0, 0, 0, HDMI } },
+        { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+        { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { 0, 0, 0, MIPI_HSI } },
+        { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUD, 0,
+                                               CEC_1, CEC_2 } },
+        { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+        { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+                                               CMT14, CMT15 } },
+        { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { 0, 0,
+                                               MMC_MMC_ERR, MMC_MMC_NOR } },
+        { 0xe6940040, 0, 16, 4, /* IPRQA3 */ { IIC4_ALI4, IIC4_TACKI4,
+                                               IIC4_WAITI4, IIC4_DTEI4 } },
+        { 0xe6940044, 0, 16, 4, /* IPRRA3 */ { IIC3_ALI3, IIC3_TACKI3,
+                                               IIC3_WAITI3, IIC3_DTEI3 } },
+        { 0xe6940048, 0, 16, 4, /* IPRSA3 */ { 0/*ERI*/, 0/*RXI*/,
+                                               0/*TXI*/, 0/*TEI*/} },
+        { 0xe694004c, 0, 16, 4, /* IPRTA3 */ { USB0_USB0I1, USB0_USB0I0,
+                                               USB1_USB1I1, USB1_USB1I0 } },
+        { 0xe6940050, 0, 16, 4, /* IPRUA3 */ { USBHSDMAC1_USHDMI, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+        { 0xe6900000, 32, 4, /* ICR1A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900004, 32, 4, /* ICR2A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900008, 32, 4, /* ICR3A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690000c, 32, 4, /* ICR4A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+        { 0xe6900020, 0, 8, /* INTREQ00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900024, 0, 8, /* INTREQ10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900028, 0, 8, /* INTREQ20A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690002c, 0, 8, /* INTREQ30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca",
+                             intca_vectors, intca_groups,
+                             intca_mask_registers, intca_prio_registers,
+                             intca_sense_registers, intca_ack_registers);
+
+void __init sh7372_init_irq(void)
+{
+        register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/intc-sh7377.c b/arch/arm/mach-shmobile/intc-sh7377.c
new file mode 100644
index 00000000000..125021cfba5
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh7377.c
@@ -0,0 +1,350 @@
+/*
+ * sh7377 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+        UNUSED_INTCA = 0,
+
+        /* interrupt sources INTCA */
+        IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A,
+        IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A,
+        IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A,
+        IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A,
+        DIRC,
+        _2DG,
+        CRYPT_STD,
+        IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1,
+        AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMRX,
+        MFI_MFIM, MFI_MFIS,
+        BBIF1, BBIF2,
+        USBDMAC_USHDMI,
+        USBHS_USHI0, USBHS_USHI1,
+        _3DG_SGX540,
+        CMT1_CMT10, CMT1_CMT11, CMT1_CMT12, CMT1_CMT13, CMT2, CMT3,
+        KEYSC_KEY,
+        SCIFA0, SCIFA1, SCIFA2, SCIFA3,
+        MSIOF2, MSIOF1,
+        SCIFA4, SCIFA5, SCIFB,
+        FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+        SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3,
+        SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, SDHI1_SDHI1I3,
+        MSU_MSU, MSU_MSU2,
+        IRREM,
+        MSUG,
+        IRDA,
+        TPU0, TPU1, TPU2, TPU3, TPU4,
+        LCRC,
+        PINTCA_PINT1, PINTCA_PINT2,
+        TTI20,
+        MISTY,
+        DDM,
+        RWDT0, RWDT1,
+        DMAC_1_DEI0, DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3,
+        DMAC_2_DEI4, DMAC_2_DEI5, DMAC_2_DADERR,
+        DMAC2_1_DEI0, DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3,
+        DMAC2_2_DEI4, DMAC2_2_DEI5, DMAC2_2_DADERR,
+        DMAC3_1_DEI0, DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3,
+        DMAC3_2_DEI4, DMAC3_2_DEI5, DMAC3_2_DADERR,
+        SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM,
+        ICUSB_ICUSB0, ICUSB_ICUSB1,
+        ICUDMC_ICUDMC1, ICUDMC_ICUDMC2,
+        SPU2_SPU0, SPU2_SPU1,
+        FSI,
+        FMSI,
+        SCUV,
+        IPMMU_IPMMUB,
+        AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ, AP_ARM_DMAIRQ, AP_ARM_DMASIRQ,
+        MFIS2,
+        CPORTR2S,
+        CMT14, CMT15,
+        SCIFA6,
+
+        /* interrupt groups INTCA */
+        DMAC_1, DMAC_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT,
+        AP_ARM1, AP_ARM2, USBHS, SPU2, FLCTL, IIC1, SDHI0, SDHI1,
+        ICUSB, ICUDMC
+};
+
+static struct intc_vect intca_vectors[] = {
+        INTC_VECT(IRQ0A, 0x0200), INTC_VECT(IRQ1A, 0x0220),
+        INTC_VECT(IRQ2A, 0x0240), INTC_VECT(IRQ3A, 0x0260),
+        INTC_VECT(IRQ4A, 0x0280), INTC_VECT(IRQ5A, 0x02a0),
+        INTC_VECT(IRQ6A, 0x02c0), INTC_VECT(IRQ7A, 0x02e0),
+        INTC_VECT(IRQ8A, 0x0300), INTC_VECT(IRQ9A, 0x0320),
+        INTC_VECT(IRQ10A, 0x0340), INTC_VECT(IRQ11A, 0x0360),
+        INTC_VECT(IRQ12A, 0x0380), INTC_VECT(IRQ13A, 0x03a0),
+        INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
+        INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
+        INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
+        INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+        INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
+        INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
+        INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
+        INTC_VECT(IRQ28A, 0x3380), INTC_VECT(IRQ29A, 0x33a0),
+        INTC_VECT(IRQ30A, 0x33c0), INTC_VECT(IRQ31A, 0x33e0),
+        INTC_VECT(DIRC, 0x0560),
+        INTC_VECT(_2DG, 0x05e0),
+        INTC_VECT(CRYPT_STD, 0x0700),
+        INTC_VECT(IIC1_ALI1, 0x0780), INTC_VECT(IIC1_TACKI1, 0x07a0),
+        INTC_VECT(IIC1_WAITI1, 0x07c0), INTC_VECT(IIC1_DTEI1, 0x07e0),
+        INTC_VECT(AP_ARM_IRQPMU, 0x0800), INTC_VECT(AP_ARM_COMMTX, 0x0840),
+        INTC_VECT(AP_ARM_COMMRX, 0x0860),
+        INTC_VECT(MFI_MFIM, 0x0900), INTC_VECT(MFI_MFIS, 0x0920),
+        INTC_VECT(BBIF1, 0x0940), INTC_VECT(BBIF2, 0x0960),
+        INTC_VECT(USBDMAC_USHDMI, 0x0a00),
+        INTC_VECT(USBHS_USHI0, 0x0a20), INTC_VECT(USBHS_USHI1, 0x0a40),
+        INTC_VECT(_3DG_SGX540, 0x0a60),
+        INTC_VECT(CMT1_CMT10, 0x0b00), INTC_VECT(CMT1_CMT11, 0x0b20),
+        INTC_VECT(CMT1_CMT12, 0x0b40), INTC_VECT(CMT1_CMT13, 0x0b60),
+        INTC_VECT(CMT2, 0x0b80), INTC_VECT(CMT3, 0x0ba0),
+        INTC_VECT(KEYSC_KEY, 0x0be0),
+        INTC_VECT(SCIFA0, 0x0c00), INTC_VECT(SCIFA1, 0x0c20),
+        INTC_VECT(SCIFA2, 0x0c40), INTC_VECT(SCIFA3, 0x0c60),
+        INTC_VECT(MSIOF2, 0x0c80), INTC_VECT(MSIOF1, 0x0d00),
+        INTC_VECT(SCIFA4, 0x0d20), INTC_VECT(SCIFA5, 0x0d40),
+        INTC_VECT(SCIFB, 0x0d60),
+        INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0),
+        INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0),
+        INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20),
+        INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60),
+        INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0),
+        INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(SDHI1_SDHI1I3, 0x0ee0),
+        INTC_VECT(MSU_MSU, 0x0f20), INTC_VECT(MSU_MSU2, 0x0f40),
+        INTC_VECT(IRREM, 0x0f60),
+        INTC_VECT(MSUG, 0x0fa0),
+        INTC_VECT(IRDA, 0x0480),
+        INTC_VECT(TPU0, 0x04a0), INTC_VECT(TPU1, 0x04c0),
+        INTC_VECT(TPU2, 0x04e0), INTC_VECT(TPU3, 0x0500),
+        INTC_VECT(TPU4, 0x0520),
+        INTC_VECT(LCRC, 0x0540),
+        INTC_VECT(PINTCA_PINT1, 0x1000), INTC_VECT(PINTCA_PINT2, 0x1020),
+        INTC_VECT(TTI20, 0x1100),
+        INTC_VECT(MISTY, 0x1120),
+        INTC_VECT(DDM, 0x1140),
+        INTC_VECT(RWDT0, 0x1280), INTC_VECT(RWDT1, 0x12a0),
+        INTC_VECT(DMAC_1_DEI0, 0x2000), INTC_VECT(DMAC_1_DEI1, 0x2020),
+        INTC_VECT(DMAC_1_DEI2, 0x2040), INTC_VECT(DMAC_1_DEI3, 0x2060),
+        INTC_VECT(DMAC_2_DEI4, 0x2080), INTC_VECT(DMAC_2_DEI5, 0x20a0),
+        INTC_VECT(DMAC_2_DADERR, 0x20c0),
+        INTC_VECT(DMAC2_1_DEI0, 0x2100), INTC_VECT(DMAC2_1_DEI1, 0x2120),
+        INTC_VECT(DMAC2_1_DEI2, 0x2140), INTC_VECT(DMAC2_1_DEI3, 0x2160),
+        INTC_VECT(DMAC2_2_DEI4, 0x2180), INTC_VECT(DMAC2_2_DEI5, 0x21a0),
+        INTC_VECT(DMAC2_2_DADERR, 0x21c0),
+        INTC_VECT(DMAC3_1_DEI0, 0x2200), INTC_VECT(DMAC3_1_DEI1, 0x2220),
+        INTC_VECT(DMAC3_1_DEI2, 0x2240), INTC_VECT(DMAC3_1_DEI3, 0x2260),
+        INTC_VECT(DMAC3_2_DEI4, 0x2280), INTC_VECT(DMAC3_2_DEI5, 0x22a0),
+        INTC_VECT(DMAC3_2_DADERR, 0x22c0),
+        INTC_VECT(SHWYSTAT_RT, 0x1300), INTC_VECT(SHWYSTAT_HS, 0x1d20),
+        INTC_VECT(SHWYSTAT_COM, 0x1340),
+        INTC_VECT(ICUSB_ICUSB0, 0x1700), INTC_VECT(ICUSB_ICUSB1, 0x1720),
+        INTC_VECT(ICUDMC_ICUDMC1, 0x1780), INTC_VECT(ICUDMC_ICUDMC2, 0x17a0),
+        INTC_VECT(SPU2_SPU0, 0x1800), INTC_VECT(SPU2_SPU1, 0x1820),
+        INTC_VECT(FSI, 0x1840),
+        INTC_VECT(FMSI, 0x1860),
+        INTC_VECT(SCUV, 0x1880),
+        INTC_VECT(IPMMU_IPMMUB, 0x1900),
+        INTC_VECT(AP_ARM_CTIIRQ, 0x1980),
+        INTC_VECT(AP_ARM_DMAEXTERRIRQ, 0x19a0),
+        INTC_VECT(AP_ARM_DMAIRQ, 0x19c0),
+        INTC_VECT(AP_ARM_DMASIRQ, 0x19e0),
+        INTC_VECT(MFIS2, 0x1a00),
+        INTC_VECT(CPORTR2S, 0x1a20),
+        INTC_VECT(CMT14, 0x1a40), INTC_VECT(CMT15, 0x1a60),
+        INTC_VECT(SCIFA6, 0x1a80),
+};
+
+static struct intc_group intca_groups[] __initdata = {
+        INTC_GROUP(DMAC_1, DMAC_1_DEI0,
+                   DMAC_1_DEI1, DMAC_1_DEI2, DMAC_1_DEI3),
+        INTC_GROUP(DMAC_2, DMAC_2_DEI4,
+                   DMAC_2_DEI5, DMAC_2_DADERR),
+        INTC_GROUP(DMAC2_1, DMAC2_1_DEI0,
+                   DMAC2_1_DEI1, DMAC2_1_DEI2, DMAC2_1_DEI3),
+        INTC_GROUP(DMAC2_2, DMAC2_2_DEI4,
+                   DMAC2_2_DEI5, DMAC2_2_DADERR),
+        INTC_GROUP(DMAC3_1, DMAC3_1_DEI0,
+                   DMAC3_1_DEI1, DMAC3_1_DEI2, DMAC3_1_DEI3),
+        INTC_GROUP(DMAC3_2, DMAC3_2_DEI4,
+                   DMAC3_2_DEI5, DMAC3_2_DADERR),
+        INTC_GROUP(AP_ARM1, AP_ARM_IRQPMU, AP_ARM_COMMTX, AP_ARM_COMMTX),
+        INTC_GROUP(USBHS, USBHS_USHI0, USBHS_USHI1),
+        INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+        INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI,
+                   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+        INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1),
+        INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1,
+                   SDHI0_SDHI0I2, SDHI0_SDHI0I3),
+        INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1,
+                   SDHI1_SDHI1I2, SDHI1_SDHI1I3),
+        INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM),
+        INTC_GROUP(ICUSB, ICUSB_ICUSB0, ICUSB_ICUSB1),
+        INTC_GROUP(ICUDMC, ICUDMC_ICUDMC1, ICUDMC_ICUDMC2),
+};
+
+static struct intc_mask_reg intca_mask_registers[] = {
+        { 0xe6900040, 0xe6900060, 8, /* INTMSK00A / INTMSKCLR00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900044, 0xe6900064, 8, /* INTMSK10A / INTMSKCLR10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900048, 0xe6900068, 8, /* INTMSK20A / INTMSKCLR20A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690004c, 0xe690006c, 8, /* INTMSK30A / INTMSKCLR30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+        { 0xe6940080, 0xe69400c0, 8, /* IMR0A / IMCR0A */
+          { DMAC2_1_DEI3, DMAC2_1_DEI2, DMAC2_1_DEI1, DMAC2_1_DEI0,
+            AP_ARM_IRQPMU, 0, AP_ARM_COMMTX, AP_ARM_COMMRX } },
+        { 0xe6940084, 0xe69400c4, 8, /* IMR1A / IMCR1A */
+          { _2DG, CRYPT_STD, DIRC, 0,
+            DMAC_1_DEI3, DMAC_1_DEI2, DMAC_1_DEI1, DMAC_1_DEI0 } },
+        { 0xe6940088, 0xe69400c8, 8, /* IMR2A / IMCR2A */
+          { PINTCA_PINT1, PINTCA_PINT2, 0, 0,
+            BBIF1, BBIF2, MFI_MFIS, MFI_MFIM } },
+        { 0xe694008c, 0xe69400cc, 8, /* IMR3A / IMCR3A */
+          { DMAC3_1_DEI3, DMAC3_1_DEI2, DMAC3_1_DEI1, DMAC3_1_DEI0,
+            DMAC3_2_DADERR, DMAC3_2_DEI5, DMAC3_2_DEI4, IRDA } },
+        { 0xe6940090, 0xe69400d0, 8, /* IMR4A / IMCR4A */
+          { DDM, 0, 0, 0,
+            0, 0, 0, 0 } },
+        { 0xe6940094, 0xe69400d4, 8, /* IMR5A / IMCR5A */
+          { KEYSC_KEY, DMAC_2_DADERR, DMAC_2_DEI5, DMAC_2_DEI4,
+            SCIFA3, SCIFA2, SCIFA1, SCIFA0 } },
+        { 0xe6940098, 0xe69400d8, 8, /* IMR6A / IMCR6A */
+          { SCIFB, SCIFA5, SCIFA4, MSIOF1,
+            0, 0, MSIOF2, 0 } },
+        { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */
+          { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0,
+            FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+        { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */
+          { SDHI1_SDHI1I3, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0,
+            TTI20, USBDMAC_USHDMI, 0, MSUG } },
+        { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */
+          { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10,
+            CMT2, USBHS_USHI1, USBHS_USHI0, _3DG_SGX540 } },
+        { 0xe69400a8, 0xe69400e8, 8, /* IMR10A / IMCR10A */
+          { 0, DMAC2_2_DADERR, DMAC2_2_DEI5, DMAC2_2_DEI4,
+            0, 0, 0, 0 } },
+        { 0xe69400ac, 0xe69400ec, 8, /* IMR11A / IMCR11A */
+          { IIC1_DTEI1, IIC1_WAITI1, IIC1_TACKI1, IIC1_ALI1,
+            LCRC, MSU_MSU2, IRREM, MSU_MSU } },
+        { 0xe69400b0, 0xe69400f0, 8, /* IMR12A / IMCR12A */
+          { 0, 0, TPU0, TPU1,
+            TPU2, TPU3, TPU4, 0 } },
+        { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */
+          { 0, 0, 0, 0,
+            MISTY, CMT3, RWDT1, RWDT0 } },
+        { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */
+          { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0,
+            0, 0, 0, 0 } },
+        { 0xe6950090, 0xe69500d0, 8, /* IMR4A3 / IMCR4A3 */
+          { ICUSB_ICUSB0, ICUSB_ICUSB1, 0, 0,
+            ICUDMC_ICUDMC1, ICUDMC_ICUDMC2, 0, 0 } },
+        { 0xe6950094, 0xe69500d4, 8, /* IMR5A3 / IMCR5A3 */
+          { SPU2_SPU0, SPU2_SPU1, FSI, FMSI,
+            SCUV, 0, 0, 0 } },
+        { 0xe6950098, 0xe69500d8, 8, /* IMR6A3 / IMCR6A3 */
+          { IPMMU_IPMMUB, 0, 0, 0,
+            AP_ARM_CTIIRQ, AP_ARM_DMAEXTERRIRQ,
+            AP_ARM_DMAIRQ, AP_ARM_DMASIRQ } },
+        { 0xe695009c, 0xe69500dc, 8, /* IMR7A3 / IMCR7A3 */
+          { MFIS2, CPORTR2S, CMT14, CMT15,
+            SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_prio_reg intca_prio_registers[] = {
+        { 0xe6900010, 0, 32, 4, /* INTPRI00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900014, 0, 32, 4, /* INTPRI10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900018, 0, 32, 4, /* INTPRI10A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690001c, 0, 32, 4, /* INTPRI30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+
+        { 0xe6940000, 0, 16, 4, /* IPRAA */ { DMAC3_1, DMAC3_2, CMT2, LCRC } },
+        { 0xe6940004, 0, 16, 4, /* IPRBA */ { IRDA, 0, BBIF1, BBIF2 } },
+        { 0xe6940008, 0, 16, 4, /* IPRCA */ { _2DG, CRYPT_STD,
+                                              CMT1_CMT11, AP_ARM1 } },
+        { 0xe694000c, 0, 16, 4, /* IPRDA */ { PINTCA_PINT1, PINTCA_PINT2,
+                                              CMT1_CMT12, TPU4 } },
+        { 0xe6940010, 0, 16, 4, /* IPREA */ { DMAC_1, MFI_MFIS,
+                                              MFI_MFIM, USBHS } },
+        { 0xe6940014, 0, 16, 4, /* IPRFA */ { KEYSC_KEY, DMAC_2,
+                                              _3DG_SGX540, CMT1_CMT10 } },
+        { 0xe6940018, 0, 16, 4, /* IPRGA */ { SCIFA0, SCIFA1,
+                                              SCIFA2, SCIFA3 } },
+        { 0xe694001c, 0, 16, 4, /* IPRGH */ { MSIOF2, USBDMAC_USHDMI,
+                                              FLCTL, SDHI0 } },
+        { 0xe6940020, 0, 16, 4, /* IPRIA */ { MSIOF1, SCIFA4, MSU_MSU, IIC1 } },
+        { 0xe6940024, 0, 16, 4, /* IPRJA */ { DMAC2_1, DMAC2_2, MSUG, TTI20 } },
+        { 0xe6940028, 0, 16, 4, /* IPRKA */ { 0, CMT1_CMT13, IRREM, SDHI1 } },
+        { 0xe694002c, 0, 16, 4, /* IPRLA */ { TPU0, TPU1, TPU2, TPU3 } },
+        { 0xe6940030, 0, 16, 4, /* IPRMA */ { MISTY, CMT3, RWDT1, RWDT0 } },
+        { 0xe6940034, 0, 16, 4, /* IPRNA */ { SCIFB, SCIFA5, 0, DDM } },
+        { 0xe6940038, 0, 16, 4, /* IPROA */ { 0, 0, DIRC, 0 } },
+        { 0xe6950000, 0, 16, 4, /* IPRAA3 */ { SHWYSTAT, 0, 0, 0 } },
+        { 0xe6950020, 0, 16, 4, /* IPRIA3 */ { ICUSB, 0, 0, 0 } },
+        { 0xe6950024, 0, 16, 4, /* IPRJA3 */ { ICUDMC, 0, 0, 0 } },
+        { 0xe6950028, 0, 16, 4, /* IPRKA3 */ { SPU2, 0, FSI, FMSI } },
+        { 0xe695002c, 0, 16, 4, /* IPRLA3 */ { SCUV, 0, 0, 0 } },
+        { 0xe6950030, 0, 16, 4, /* IPRMA3 */ { IPMMU_IPMMUB, 0, 0, 0 } },
+        { 0xe6950034, 0, 16, 4, /* IPRNA3 */ { AP_ARM2, 0, 0, 0 } },
+        { 0xe6950038, 0, 16, 4, /* IPROA3 */ { MFIS2, CPORTR2S,
+                                               CMT14, CMT15 } },
+        { 0xe694003c, 0, 16, 4, /* IPRPA3 */ { SCIFA6, 0, 0, 0 } },
+};
+
+static struct intc_sense_reg intca_sense_registers[] __initdata = {
+        { 0xe6900000, 16, 2, /* ICR1A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900004, 16, 2, /* ICR2A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900008, 16, 2, /* ICR3A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690000c, 16, 2, /* ICR4A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static struct intc_mask_reg intca_ack_registers[] __initdata = {
+        { 0xe6900020, 0, 8, /* INTREQ00A */
+          { IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A } },
+        { 0xe6900024, 0, 8, /* INTREQ10A */
+          { IRQ8A, IRQ9A, IRQ10A, IRQ11A, IRQ12A, IRQ13A, IRQ14A, IRQ15A } },
+        { 0xe6900028, 0, 8, /* INTREQ20A */
+          { IRQ16A, IRQ17A, IRQ18A, IRQ19A, IRQ20A, IRQ21A, IRQ22A, IRQ23A } },
+        { 0xe690002c, 0, 8, /* INTREQ30A */
+          { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } },
+};
+
+static DECLARE_INTC_DESC_ACK(intca_desc, "sh7377-intca",
+                             intca_vectors, intca_groups,
+                             intca_mask_registers, intca_prio_registers,
+                             intca_sense_registers, intca_ack_registers);
+
+void __init sh7377_init_irq(void)
+{
+        register_intc_controller(&intca_desc);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7367.c b/arch/arm/mach-shmobile/pfc-sh7367.c
new file mode 100644
index 00000000000..128555e76e4
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7367.c
@@ -0,0 +1,1801 @@
+/*
+ * sh7367 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7367.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)                               \
+        _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),       \
+        _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),       \
+        _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),       \
+        _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),       \
+        _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)                               \
+        _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),     \
+        _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),     \
+        _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),     \
+        _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),     \
+        _10(fn, pfx##9, sfx)
+
+#define _273(fn, pfx, sfx)              \
+        _10(fn, pfx, sfx), _90(fn, pfx, sfx),           \
+        _10(fn, pfx##10, sfx), _90(fn, pfx##1, sfx),    \
+        _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),   \
+        _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),   \
+        _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),   \
+        _10(fn, pfx##26, sfx), _1(fn, pfx##270, sfx),   \
+        _1(fn, pfx##271, sfx), _1(fn, pfx##272, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_273(str) _273(_PORT, PORT, str)
+
+enum {
+        PINMUX_RESERVED = 0,
+
+        PINMUX_DATA_BEGIN,
+        PORT_273(DATA), /* PORT0_DATA -> PORT272_DATA */
+        PINMUX_DATA_END,
+
+        PINMUX_INPUT_BEGIN,
+        PORT_273(IN), /* PORT0_IN -> PORT272_IN */
+        PINMUX_INPUT_END,
+
+        PINMUX_INPUT_PULLUP_BEGIN,
+        PORT_273(IN_PU), /* PORT0_IN_PU -> PORT272_IN_PU */
+        PINMUX_INPUT_PULLUP_END,
+
+        PINMUX_INPUT_PULLDOWN_BEGIN,
+        PORT_273(IN_PD), /* PORT0_IN_PD -> PORT272_IN_PD */
+        PINMUX_INPUT_PULLDOWN_END,
+
+        PINMUX_OUTPUT_BEGIN,
+        PORT_273(OUT), /* PORT0_OUT -> PORT272_OUT */
+        PINMUX_OUTPUT_END,
+
+        PINMUX_FUNCTION_BEGIN,
+        PORT_273(FN_IN), /* PORT0_FN_IN -> PORT272_FN_IN */
+        PORT_273(FN_OUT), /* PORT0_FN_OUT -> PORT272_FN_OUT */
+        PORT_273(FN0), /* PORT0_FN0 -> PORT272_FN0 */
+        PORT_273(FN1), /* PORT0_FN1 -> PORT272_FN1 */
+        PORT_273(FN2), /* PORT0_FN2 -> PORT272_FN2 */
+        PORT_273(FN3), /* PORT0_FN3 -> PORT272_FN3 */
+        PORT_273(FN4), /* PORT0_FN4 -> PORT272_FN4 */
+        PORT_273(FN5), /* PORT0_FN5 -> PORT272_FN5 */
+        PORT_273(FN6), /* PORT0_FN6 -> PORT272_FN6 */
+        PORT_273(FN7), /* PORT0_FN7 -> PORT272_FN7 */
+
+        MSELBCR_MSEL2_1, MSELBCR_MSEL2_0,
+        PINMUX_FUNCTION_END,
+
+        PINMUX_MARK_BEGIN,
+        /* Special Pull-up / Pull-down Functions */
+        PORT48_KEYIN0_PU_MARK, PORT49_KEYIN1_PU_MARK,
+        PORT50_KEYIN2_PU_MARK, PORT55_KEYIN3_PU_MARK,
+        PORT56_KEYIN4_PU_MARK, PORT57_KEYIN5_PU_MARK,
+        PORT58_KEYIN6_PU_MARK,
+
+        /* 49-1 */
+        VBUS0_MARK, CPORT0_MARK, CPORT1_MARK, CPORT2_MARK,
+        CPORT3_MARK, CPORT4_MARK, CPORT5_MARK, CPORT6_MARK,
+        CPORT7_MARK, CPORT8_MARK, CPORT9_MARK, CPORT10_MARK,
+        CPORT11_MARK, SIN2_MARK, CPORT12_MARK, XCTS2_MARK,
+        CPORT13_MARK, RFSPO4_MARK, CPORT14_MARK, RFSPO5_MARK,
+        CPORT15_MARK, CPORT16_MARK, CPORT17_MARK, SOUT2_MARK,
+        CPORT18_MARK, XRTS2_MARK, CPORT19_MARK, CPORT20_MARK,
+        RFSPO6_MARK, CPORT21_MARK, STATUS0_MARK, CPORT22_MARK,
+        STATUS1_MARK, CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+        MPORT0_MARK, MPORT1_MARK, B_SYNLD1_MARK, B_SYNLD2_MARK,
+        XMAINPS_MARK, XDIVPS_MARK, XIDRST_MARK, IDCLK_MARK,
+        IDIO_MARK, SOUT1_MARK, SCIFA4_TXD_MARK,
+        M02_BERDAT_MARK, SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+        XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+        XCTS1_MARK, SCIFA4_CTS_MARK,
+
+        /* 49-2 */
+        HSU_IQ_AGC6_MARK, MFG2_IN2_MARK, MSIOF2_MCK0_MARK,
+        HSU_IQ_AGC5_MARK, MFG2_IN1_MARK, MSIOF2_MCK1_MARK,
+        HSU_IQ_AGC4_MARK, MSIOF2_RSYNC_MARK,
+        HSU_IQ_AGC3_MARK, MFG2_OUT1_MARK, MSIOF2_RSCK_MARK,
+        HSU_IQ_AGC2_MARK, PORT42_KEYOUT0_MARK,
+        HSU_IQ_AGC1_MARK, PORT43_KEYOUT1_MARK,
+        HSU_IQ_AGC0_MARK, PORT44_KEYOUT2_MARK,
+        HSU_IQ_AGC_ST_MARK, PORT45_KEYOUT3_MARK,
+        HSU_IQ_PDO_MARK, PORT46_KEYOUT4_MARK,
+        HSU_IQ_PYO_MARK, PORT47_KEYOUT5_MARK,
+        HSU_EN_TXMUX_G3MO_MARK, PORT48_KEYIN0_MARK,
+        HSU_I_TXMUX_G3MO_MARK, PORT49_KEYIN1_MARK,
+        HSU_Q_TXMUX_G3MO_MARK, PORT50_KEYIN2_MARK,
+        HSU_SYO_MARK, PORT51_MSIOF2_TSYNC_MARK,
+        HSU_SDO_MARK, PORT52_MSIOF2_TSCK_MARK,
+        HSU_TGTTI_G3MO_MARK, PORT53_MSIOF2_TXD_MARK,
+        B_TIME_STAMP_MARK, PORT54_MSIOF2_RXD_MARK,
+        HSU_SDI_MARK, PORT55_KEYIN3_MARK,
+        HSU_SCO_MARK, PORT56_KEYIN4_MARK,
+        HSU_DREQ_MARK, PORT57_KEYIN5_MARK,
+        HSU_DACK_MARK, PORT58_KEYIN6_MARK,
+        HSU_CLK61M_MARK, PORT59_MSIOF2_SS1_MARK,
+        HSU_XRST_MARK, PORT60_MSIOF2_SS2_MARK,
+        PCMCLKO_MARK, SYNC8KO_MARK, DNPCM_A_MARK, UPPCM_A_MARK,
+        XTALB1L_MARK,
+        GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+        GPS_AGC2_MARK, SCIFA0_SCK_MARK,
+        GPS_AGC3_MARK, SCIFA0_TXD_MARK,
+        GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+        GPS_PWRD_MARK, SCIFA0_CTS_MARK,
+        GPS_IM_MARK, GPS_IS_MARK, GPS_QM_MARK, GPS_QS_MARK,
+        SIUBOMC_MARK, TPU2TO0_MARK,
+        SIUCKB_MARK, TPU2TO1_MARK,
+        SIUBOLR_MARK, BBIF2_TSYNC_MARK, TPU2TO2_MARK,
+        SIUBOBT_MARK, BBIF2_TSCK_MARK, TPU2TO3_MARK,
+        SIUBOSLD_MARK, BBIF2_TXD_MARK, TPU3TO0_MARK,
+        SIUBILR_MARK, TPU3TO1_MARK,
+        SIUBIBT_MARK, TPU3TO2_MARK,
+        SIUBISLD_MARK, TPU3TO3_MARK,
+        NMI_MARK, TPU4TO0_MARK,
+        DNPCM_M_MARK, TPU4TO1_MARK, TPU4TO2_MARK, TPU4TO3_MARK,
+        IRQ_TMPB_MARK,
+        PWEN_MARK, MFG1_OUT1_MARK,
+        OVCN_MARK, MFG1_IN1_MARK,
+        OVCN2_MARK, MFG1_IN2_MARK,
+
+        /* 49-3 */
+        RFSPO1_MARK, RFSPO2_MARK, RFSPO3_MARK, PORT93_VIO_CKO2_MARK,
+        USBTERM_MARK, EXTLP_MARK, IDIN_MARK,
+        SCIFA5_CTS_MARK, MFG0_IN1_MARK,
+        SCIFA5_RTS_MARK, MFG0_IN2_MARK,
+        SCIFA5_RXD_MARK,
+        SCIFA5_TXD_MARK,
+        SCIFA5_SCK_MARK, MFG0_OUT1_MARK,
+        A0_EA0_MARK, BS_MARK,
+        A14_EA14_MARK, PORT102_KEYOUT0_MARK,
+        A15_EA15_MARK, PORT103_KEYOUT1_MARK, DV_CLKOL_MARK,
+        A16_EA16_MARK, PORT104_KEYOUT2_MARK,
+        DV_VSYNCL_MARK, MSIOF0_SS1_MARK,
+        A17_EA17_MARK, PORT105_KEYOUT3_MARK,
+        DV_HSYNCL_MARK, MSIOF0_TSYNC_MARK,
+        A18_EA18_MARK, PORT106_KEYOUT4_MARK,
+        DV_DL0_MARK, MSIOF0_TSCK_MARK,
+        A19_EA19_MARK, PORT107_KEYOUT5_MARK,
+        DV_DL1_MARK, MSIOF0_TXD_MARK,
+        A20_EA20_MARK, PORT108_KEYIN0_MARK,
+        DV_DL2_MARK, MSIOF0_RSCK_MARK,
+        A21_EA21_MARK, PORT109_KEYIN1_MARK,
+        DV_DL3_MARK, MSIOF0_RSYNC_MARK,
+        A22_EA22_MARK, PORT110_KEYIN2_MARK,
+        DV_DL4_MARK, MSIOF0_MCK0_MARK,
+        A23_EA23_MARK, PORT111_KEYIN3_MARK,
+        DV_DL5_MARK, MSIOF0_MCK1_MARK,
+        A24_EA24_MARK, PORT112_KEYIN4_MARK,
+        DV_DL6_MARK, MSIOF0_RXD_MARK,
+        A25_EA25_MARK, PORT113_KEYIN5_MARK,
+        DV_DL7_MARK, MSIOF0_SS2_MARK,
+        A26_MARK, PORT113_KEYIN6_MARK, DV_CLKIL_MARK,
+        D0_ED0_NAF0_MARK, D1_ED1_NAF1_MARK, D2_ED2_NAF2_MARK,
+        D3_ED3_NAF3_MARK, D4_ED4_NAF4_MARK, D5_ED5_NAF5_MARK,
+        D6_ED6_NAF6_MARK, D7_ED7_NAF7_MARK, D8_ED8_NAF8_MARK,
+        D9_ED9_NAF9_MARK, D10_ED10_NAF10_MARK, D11_ED11_NAF11_MARK,
+        D12_ED12_NAF12_MARK, D13_ED13_NAF13_MARK,
+        D14_ED14_NAF14_MARK, D15_ED15_NAF15_MARK,
+        CS4_MARK, CS5A_MARK, CS5B_MARK, FCE1_MARK,
+        CS6B_MARK, XCS2_MARK, FCE0_MARK, CS6A_MARK,
+        DACK0_MARK, WAIT_MARK, DREQ0_MARK, RD_XRD_MARK,
+        A27_MARK, RDWR_XWE_MARK, WE0_XWR0_FWE_MARK,
+        WE1_XWR1_MARK, FRB_MARK, CKO_MARK,
+        NBRSTOUT_MARK, NBRST_MARK,
+
+        /* 49-4 */
+        RFSPO0_MARK, PORT146_VIO_CKO2_MARK, TSTMD_MARK,
+        VIO_VD_MARK, VIO_HD_MARK,
+        VIO_D0_MARK, VIO_D1_MARK, VIO_D2_MARK,
+        VIO_D3_MARK, VIO_D4_MARK, VIO_D5_MARK,
+        VIO_D6_MARK, VIO_D7_MARK, VIO_D8_MARK,
+        VIO_D9_MARK, VIO_D10_MARK, VIO_D11_MARK,
+        VIO_D12_MARK, VIO_D13_MARK, VIO_D14_MARK,
+        VIO_D15_MARK, VIO_CLK_MARK, VIO_FIELD_MARK,
+        VIO_CKO_MARK,
+        MFG3_IN1_MARK, MFG3_IN2_MARK,
+        M9_SLCD_A01_MARK, MFG3_OUT1_MARK, TPU0TO0_MARK,
+        M10_SLCD_CK1_MARK, MFG4_IN1_MARK, TPU0TO1_MARK,
+        M11_SLCD_SO1_MARK, MFG4_IN2_MARK, TPU0TO2_MARK,
+        M12_SLCD_CE1_MARK, MFG4_OUT1_MARK, TPU0TO3_MARK,
+        LCDD0_MARK, PORT175_KEYOUT0_MARK, DV_D0_MARK,
+        SIUCKA_MARK, MFG0_OUT2_MARK,
+        LCDD1_MARK, PORT176_KEYOUT1_MARK, DV_D1_MARK,
+        SIUAOLR_MARK, BBIF2_TSYNC1_MARK,
+        LCDD2_MARK, PORT177_KEYOUT2_MARK, DV_D2_MARK,
+        SIUAOBT_MARK, BBIF2_TSCK1_MARK,
+        LCDD3_MARK, PORT178_KEYOUT3_MARK, DV_D3_MARK,
+        SIUAOSLD_MARK, BBIF2_TXD1_MARK,
+        LCDD4_MARK, PORT179_KEYOUT4_MARK, DV_D4_MARK,
+        SIUAISPD_MARK, MFG1_OUT2_MARK,
+        LCDD5_MARK, PORT180_KEYOUT5_MARK, DV_D5_MARK,
+        SIUAILR_MARK, MFG2_OUT2_MARK,
+        LCDD6_MARK, DV_D6_MARK,
+        SIUAIBT_MARK, MFG3_OUT2_MARK, XWR2_MARK,
+        LCDD7_MARK, DV_D7_MARK,
+        SIUAISLD_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+        LCDD8_MARK, DV_D8_MARK, D16_MARK, ED16_MARK,
+        LCDD9_MARK, DV_D9_MARK, D17_MARK, ED17_MARK,
+        LCDD10_MARK, DV_D10_MARK, D18_MARK, ED18_MARK,
+        LCDD11_MARK, DV_D11_MARK, D19_MARK, ED19_MARK,
+        LCDD12_MARK, DV_D12_MARK, D20_MARK, ED20_MARK,
+        LCDD13_MARK, DV_D13_MARK, D21_MARK, ED21_MARK,
+        LCDD14_MARK, DV_D14_MARK, D22_MARK, ED22_MARK,
+        LCDD15_MARK, DV_D15_MARK, D23_MARK, ED23_MARK,
+        LCDD16_MARK, DV_HSYNC_MARK, D24_MARK, ED24_MARK,
+        LCDD17_MARK, DV_VSYNC_MARK, D25_MARK, ED25_MARK,
+        LCDD18_MARK, DREQ2_MARK, MSIOF0L_TSCK_MARK,
+        D26_MARK, ED26_MARK,
+        LCDD19_MARK, MSIOF0L_TSYNC_MARK,
+        D27_MARK, ED27_MARK,
+        LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK,
+        D28_MARK, ED28_MARK,
+        LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK,
+        D29_MARK, ED29_MARK,
+        LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_SS1_MARK,
+        D30_MARK, ED30_MARK,
+        LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_SS2_MARK,
+        D31_MARK, ED31_MARK,
+        LCDDCK_MARK, LCDWR_MARK, DV_CKO_MARK, SIUAOSPD_MARK,
+        LCDRD_MARK, DACK2_MARK, MSIOF0L_RSYNC_MARK,
+
+        /* 49-5 */
+        LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+        LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_RSCK_MARK,
+        LCDCSYN_MARK, LCDCSYN2_MARK, DV_CKI_MARK,
+        LCDLCLK_MARK, DREQ1_MARK, MSIOF0L_RXD_MARK,
+        LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, MSIOF0L_TXD_MARK,
+        VIO_DR0_MARK, VIO_DR1_MARK, VIO_DR2_MARK, VIO_DR3_MARK,
+        VIO_DR4_MARK, VIO_DR5_MARK, VIO_DR6_MARK, VIO_DR7_MARK,
+        VIO_VDR_MARK, VIO_HDR_MARK,
+        VIO_CLKR_MARK, VIO_CKOR_MARK,
+        SCIFA1_TXD_MARK, GPS_PGFA0_MARK,
+        SCIFA1_SCK_MARK, GPS_PGFA1_MARK,
+        SCIFA1_RTS_MARK, GPS_EPPSINMON_MARK,
+        SCIFA1_RXD_MARK, SCIFA1_CTS_MARK,
+        MSIOF1_TXD_MARK, SCIFA1_TXD2_MARK, GPS_TXD_MARK,
+        MSIOF1_TSYNC_MARK, SCIFA1_CTS2_MARK, I2C_SDA2_MARK,
+        MSIOF1_TSCK_MARK, SCIFA1_SCK2_MARK,
+        MSIOF1_RXD_MARK, SCIFA1_RXD2_MARK, GPS_RXD_MARK,
+        MSIOF1_RSCK_MARK, SCIFA1_RTS2_MARK,
+        MSIOF1_RSYNC_MARK, I2C_SCL2_MARK,
+        MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+        MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+        MSIOF1_SS2_MARK,
+        PORT236_IROUT_MARK, IRDA_OUT_MARK,
+        IRDA_IN_MARK, IRDA_FIRSEL_MARK,
+        TPU1TO0_MARK, TS_SPSYNC3_MARK,
+        TPU1TO1_MARK, TS_SDAT3_MARK,
+        TPU1TO2_MARK, TS_SDEN3_MARK, PORT241_MSIOF2_SS1_MARK,
+        TPU1TO3_MARK, PORT242_MSIOF2_TSCK_MARK,
+        M13_BSW_MARK, PORT243_MSIOF2_TSYNC_MARK,
+        M14_GSW_MARK, PORT244_MSIOF2_TXD_MARK,
+        PORT245_IROUT_MARK, M15_RSW_MARK,
+        SOUT3_MARK, SCIFA2_TXD1_MARK,
+        SIN3_MARK, SCIFA2_RXD1_MARK,
+        XRTS3_MARK, SCIFA2_RTS1_MARK, PORT248_MSIOF2_SS2_MARK,
+        XCTS3_MARK, SCIFA2_CTS1_MARK, PORT249_MSIOF2_RXD_MARK,
+        DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+        SDHICLK0_MARK, TCK2_MARK,
+        SDHICD0_MARK,
+        SDHID0_0_MARK, TMS2_MARK,
+        SDHID0_1_MARK, TDO2_MARK,
+        SDHID0_2_MARK, TDI2_MARK,
+        SDHID0_3_MARK, RTCK2_MARK,
+
+        /* 49-6 */
+        SDHICMD0_MARK, TRST2_MARK,
+        SDHIWP0_MARK, EDBGREQ2_MARK,
+        SDHICLK1_MARK, TCK3_MARK,
+        SDHID1_0_MARK, M11_SLCD_SO2_MARK,
+        TS_SPSYNC2_MARK, TMS3_MARK,
+        SDHID1_1_MARK, M9_SLCD_AO2_MARK,
+        TS_SDAT2_MARK, TDO3_MARK,
+        SDHID1_2_MARK, M10_SLCD_CK2_MARK,
+        TS_SDEN2_MARK, TDI3_MARK,
+        SDHID1_3_MARK, M12_SLCD_CE2_MARK,
+        TS_SCK2_MARK, RTCK3_MARK,
+        SDHICMD1_MARK, TRST3_MARK,
+        SDHICLK2_MARK, SCIFB_SCK_MARK,
+        SDHID2_0_MARK, SCIFB_TXD_MARK,
+        SDHID2_1_MARK, SCIFB_CTS_MARK,
+        SDHID2_2_MARK, SCIFB_RXD_MARK,
+        SDHID2_3_MARK, SCIFB_RTS_MARK,
+        SDHICMD2_MARK,
+        RESETOUTS_MARK,
+        DIVLOCK_MARK,
+        PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+        /* specify valid pin states for each pin in GPIO mode */
+
+        /* 49-1 (GPIO) */
+        PORT_DATA_I_PD(0),
+        PORT_DATA_I_PU(1), PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+        PORT_DATA_I_PU(4), PORT_DATA_I_PU(5), PORT_DATA_I_PU(6),
+        PORT_DATA_I_PU(7), PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+        PORT_DATA_I_PU(10), PORT_DATA_I_PU(11), PORT_DATA_I_PU(12),
+        PORT_DATA_I_PU(13),
+        PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+        PORT_DATA_O(16), PORT_DATA_O(17), PORT_DATA_O(18), PORT_DATA_O(19),
+        PORT_DATA_O(20), PORT_DATA_O(21), PORT_DATA_O(22), PORT_DATA_O(23),
+        PORT_DATA_O(24), PORT_DATA_O(25), PORT_DATA_O(26),
+        PORT_DATA_I_PD(27), PORT_DATA_I_PD(28),
+        PORT_DATA_O(29), PORT_DATA_O(30), PORT_DATA_O(31), PORT_DATA_O(32),
+        PORT_DATA_IO_PU(33),
+        PORT_DATA_O(34),
+        PORT_DATA_I_PU(35),
+        PORT_DATA_O(36),
+        PORT_DATA_I_PU_PD(37),
+
+        /* 49-2 (GPIO) */
+        PORT_DATA_IO_PU_PD(38),
+        PORT_DATA_IO_PD(39), PORT_DATA_IO_PD(40), PORT_DATA_IO_PD(41),
+        PORT_DATA_O(42), PORT_DATA_O(43), PORT_DATA_O(44), PORT_DATA_O(45),
+        PORT_DATA_O(46), PORT_DATA_O(47),
+        PORT_DATA_I_PU_PD(48), PORT_DATA_I_PU_PD(49), PORT_DATA_I_PU_PD(50),
+        PORT_DATA_IO_PD(51), PORT_DATA_IO_PD(52),
+        PORT_DATA_O(53),
+        PORT_DATA_IO_PD(54),
+        PORT_DATA_I_PU_PD(55),
+        PORT_DATA_IO_PU_PD(56),
+        PORT_DATA_I_PU_PD(57),
+        PORT_DATA_IO_PU_PD(58),
+        PORT_DATA_O(59), PORT_DATA_O(60), PORT_DATA_O(61), PORT_DATA_O(62),
+        PORT_DATA_O(63),
+        PORT_DATA_I_PU(64),
+        PORT_DATA_O(65), PORT_DATA_O(66), PORT_DATA_O(67), PORT_DATA_O(68),
+        PORT_DATA_IO_PD(69), PORT_DATA_IO_PD(70),
+        PORT_DATA_I_PD(71), PORT_DATA_I_PD(72), PORT_DATA_I_PD(73),
+        PORT_DATA_I_PD(74),
+        PORT_DATA_IO_PU_PD(75), PORT_DATA_IO_PU_PD(76),
+        PORT_DATA_IO_PD(77), PORT_DATA_IO_PD(78),
+        PORT_DATA_O(79),
+        PORT_DATA_IO_PD(80), PORT_DATA_IO_PD(81), PORT_DATA_IO_PD(82),
+        PORT_DATA_IO_PU_PD(83), PORT_DATA_IO_PU_PD(84),
+        PORT_DATA_IO_PU_PD(85), PORT_DATA_IO_PU_PD(86),
+        PORT_DATA_I_PD(87),
+        PORT_DATA_IO_PU_PD(88),
+        PORT_DATA_I_PU_PD(89), PORT_DATA_I_PU_PD(90),
+
+        /* 49-3 (GPIO) */
+        PORT_DATA_O(91), PORT_DATA_O(92), PORT_DATA_O(93), PORT_DATA_O(94),
+        PORT_DATA_I_PU_PD(95),
+        PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97), PORT_DATA_IO_PU_PD(98),
+        PORT_DATA_IO_PU_PD(99), PORT_DATA_IO_PU_PD(100),
+        PORT_DATA_IO(101), PORT_DATA_IO(102), PORT_DATA_IO(103),
+        PORT_DATA_IO_PD(104), PORT_DATA_IO_PD(105), PORT_DATA_IO_PD(106),
+        PORT_DATA_IO_PD(107),
+        PORT_DATA_IO_PU_PD(108), PORT_DATA_IO_PU_PD(109),
+        PORT_DATA_IO_PU_PD(110), PORT_DATA_IO_PU_PD(111),
+        PORT_DATA_IO_PU_PD(112), PORT_DATA_IO_PU_PD(113),
+        PORT_DATA_IO_PU_PD(114),
+        PORT_DATA_IO_PU(115), PORT_DATA_IO_PU(116), PORT_DATA_IO_PU(117),
+        PORT_DATA_IO_PU(118), PORT_DATA_IO_PU(119), PORT_DATA_IO_PU(120),
+        PORT_DATA_IO_PU(121), PORT_DATA_IO_PU(122), PORT_DATA_IO_PU(123),
+        PORT_DATA_IO_PU(124), PORT_DATA_IO_PU(125), PORT_DATA_IO_PU(126),
+        PORT_DATA_IO_PU(127), PORT_DATA_IO_PU(128), PORT_DATA_IO_PU(129),
+        PORT_DATA_IO_PU(130),
+        PORT_DATA_O(131), PORT_DATA_O(132), PORT_DATA_O(133),
+        PORT_DATA_IO_PU(134),
+        PORT_DATA_O(135), PORT_DATA_O(136),
+        PORT_DATA_I_PU_PD(137),
+        PORT_DATA_IO(138),
+        PORT_DATA_IO_PU_PD(139),
+        PORT_DATA_IO(140), PORT_DATA_IO(141),
+        PORT_DATA_I_PU(142),
+        PORT_DATA_O(143), PORT_DATA_O(144),
+        PORT_DATA_I_PU(145),
+
+        /* 49-4 (GPIO) */
+        PORT_DATA_O(146),
+        PORT_DATA_I_PU_PD(147),
+        PORT_DATA_I_PD(148), PORT_DATA_I_PD(149),
+        PORT_DATA_IO_PD(150), PORT_DATA_IO_PD(151), PORT_DATA_IO_PD(152),
+        PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154), PORT_DATA_IO_PD(155),
+        PORT_DATA_IO_PD(156), PORT_DATA_IO_PD(157), PORT_DATA_IO_PD(158),
+        PORT_DATA_IO_PD(159), PORT_DATA_IO_PD(160), PORT_DATA_IO_PD(161),
+        PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163), PORT_DATA_IO_PD(164),
+        PORT_DATA_IO_PD(165), PORT_DATA_IO_PD(166),
+        PORT_DATA_IO_PU_PD(167),
+        PORT_DATA_O(168),
+        PORT_DATA_I_PD(169), PORT_DATA_I_PD(170),
+        PORT_DATA_O(171),
+        PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+        PORT_DATA_O(174),
+        PORT_DATA_IO_PD(175), PORT_DATA_IO_PD(176), PORT_DATA_IO_PD(177),
+        PORT_DATA_IO_PD(178), PORT_DATA_IO_PD(179), PORT_DATA_IO_PD(180),
+        PORT_DATA_IO_PD(181), PORT_DATA_IO_PD(182), PORT_DATA_IO_PD(183),
+        PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185), PORT_DATA_IO_PD(186),
+        PORT_DATA_IO_PD(187), PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+        PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191), PORT_DATA_IO_PD(192),
+        PORT_DATA_IO_PD(193), PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+        PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197), PORT_DATA_IO_PD(198),
+        PORT_DATA_O(199),
+        PORT_DATA_IO_PD(200),
+
+        /* 49-5 (GPIO) */
+        PORT_DATA_O(201),
+        PORT_DATA_IO_PD(202), PORT_DATA_IO_PD(203),
+        PORT_DATA_I(204),
+        PORT_DATA_O(205),
+        PORT_DATA_IO_PD(206), PORT_DATA_IO_PD(207), PORT_DATA_IO_PD(208),
+        PORT_DATA_IO_PD(209), PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+        PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213), PORT_DATA_IO_PD(214),
+        PORT_DATA_IO_PD(215), PORT_DATA_IO_PD(216),
+        PORT_DATA_O(217),
+        PORT_DATA_I_PU_PD(218), PORT_DATA_I_PU_PD(219),
+        PORT_DATA_O(220), PORT_DATA_O(221), PORT_DATA_O(222),
+        PORT_DATA_I_PD(223),
+        PORT_DATA_I_PU_PD(224),
+        PORT_DATA_O(225),
+        PORT_DATA_IO_PD(226),
+        PORT_DATA_IO_PU_PD(227),
+        PORT_DATA_I_PD(228),
+        PORT_DATA_IO_PD(229), PORT_DATA_IO_PD(230),
+        PORT_DATA_I_PU_PD(231), PORT_DATA_I_PU_PD(232),
+        PORT_DATA_IO_PU_PD(233), PORT_DATA_IO_PU_PD(234),
+        PORT_DATA_I_PU_PD(235),
+        PORT_DATA_O(236),
+        PORT_DATA_I_PD(237),
+        PORT_DATA_IO_PU_PD(238), PORT_DATA_IO_PU_PD(239),
+        PORT_DATA_IO_PD(240), PORT_DATA_IO_PD(241),
+        PORT_DATA_IO_PD(242), PORT_DATA_IO_PD(243),
+        PORT_DATA_O(244),
+        PORT_DATA_IO_PU_PD(245),
+        PORT_DATA_O(246),
+        PORT_DATA_I_PD(247),
+        PORT_DATA_IO_PU_PD(248),
+        PORT_DATA_I_PU_PD(249),
+        PORT_DATA_IO_PD(250), PORT_DATA_IO_PD(251),
+        PORT_DATA_IO_PU_PD(252), PORT_DATA_IO_PU_PD(253),
+        PORT_DATA_IO_PU_PD(254), PORT_DATA_IO_PU_PD(255),
+        PORT_DATA_IO_PU_PD(256),
+
+        /* 49-6 (GPIO) */
+        PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PU_PD(258),
+        PORT_DATA_IO_PD(259),
+        PORT_DATA_IO_PU(260), PORT_DATA_IO_PU(261), PORT_DATA_IO_PU(262),
+        PORT_DATA_IO_PU(263), PORT_DATA_IO_PU(264),
+        PORT_DATA_O(265),
+        PORT_DATA_IO_PU(266), PORT_DATA_IO_PU(267), PORT_DATA_IO_PU(268),
+        PORT_DATA_IO_PU(269), PORT_DATA_IO_PU(270),
+        PORT_DATA_O(271),
+        PORT_DATA_I_PD(272),
+
+        /* Special Pull-up / Pull-down Functions */
+        PINMUX_DATA(PORT48_KEYIN0_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT48_FN2, PORT48_IN_PU),
+        PINMUX_DATA(PORT49_KEYIN1_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT49_FN2, PORT49_IN_PU),
+        PINMUX_DATA(PORT50_KEYIN2_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT50_FN2, PORT50_IN_PU),
+        PINMUX_DATA(PORT55_KEYIN3_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT55_FN2, PORT55_IN_PU),
+        PINMUX_DATA(PORT56_KEYIN4_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT56_FN2, PORT56_IN_PU),
+        PINMUX_DATA(PORT57_KEYIN5_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT57_FN2, PORT57_IN_PU),
+        PINMUX_DATA(PORT58_KEYIN6_PU_MARK, MSELBCR_MSEL2_1,
+                    PORT58_FN2, PORT58_IN_PU),
+
+        /* 49-1 (FN) */
+        PINMUX_DATA(VBUS0_MARK, PORT0_FN1),
+        PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+        PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+        PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+        PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+        PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+        PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+        PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+        PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+        PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+        PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+        PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+        PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+        PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+        PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+        PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+        PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+        PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+        PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+        PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+        PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+        PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+        PINMUX_DATA(CPORT17_MARK, PORT18_FN1),
+        PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+        PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+        PINMUX_DATA(XRTS2_MARK, PORT19_FN1),
+        PINMUX_DATA(CPORT19_MARK, PORT20_FN1),
+        PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+        PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+        PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+        PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+        PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+        PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+        PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+        PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+        PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+        PINMUX_DATA(MPORT0_MARK, PORT25_FN1),
+        PINMUX_DATA(MPORT1_MARK, PORT26_FN1),
+        PINMUX_DATA(B_SYNLD1_MARK, PORT27_FN1),
+        PINMUX_DATA(B_SYNLD2_MARK, PORT28_FN1),
+        PINMUX_DATA(XMAINPS_MARK, PORT29_FN1),
+        PINMUX_DATA(XDIVPS_MARK, PORT30_FN1),
+        PINMUX_DATA(XIDRST_MARK, PORT31_FN1),
+        PINMUX_DATA(IDCLK_MARK, PORT32_FN1),
+        PINMUX_DATA(IDIO_MARK, PORT33_FN1),
+        PINMUX_DATA(SOUT1_MARK, PORT34_FN1),
+        PINMUX_DATA(SCIFA4_TXD_MARK, PORT34_FN2),
+        PINMUX_DATA(M02_BERDAT_MARK, PORT34_FN3),
+        PINMUX_DATA(SIN1_MARK, PORT35_FN1),
+        PINMUX_DATA(SCIFA4_RXD_MARK, PORT35_FN2),
+        PINMUX_DATA(XWUP_MARK, PORT35_FN3),
+        PINMUX_DATA(XRTS1_MARK, PORT36_FN1),
+        PINMUX_DATA(SCIFA4_RTS_MARK, PORT36_FN2),
+        PINMUX_DATA(M03_BERCLK_MARK, PORT36_FN3),
+        PINMUX_DATA(XCTS1_MARK, PORT37_FN1),
+        PINMUX_DATA(SCIFA4_CTS_MARK, PORT37_FN2),
+
+        /* 49-2 (FN) */
+        PINMUX_DATA(HSU_IQ_AGC6_MARK, PORT38_FN1),
+        PINMUX_DATA(MFG2_IN2_MARK, PORT38_FN2),
+        PINMUX_DATA(MSIOF2_MCK0_MARK, PORT38_FN3),
+        PINMUX_DATA(HSU_IQ_AGC5_MARK, PORT39_FN1),
+        PINMUX_DATA(MFG2_IN1_MARK, PORT39_FN2),
+        PINMUX_DATA(MSIOF2_MCK1_MARK, PORT39_FN3),
+        PINMUX_DATA(HSU_IQ_AGC4_MARK, PORT40_FN1),
+        PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT40_FN3),
+        PINMUX_DATA(HSU_IQ_AGC3_MARK, PORT41_FN1),
+        PINMUX_DATA(MFG2_OUT1_MARK, PORT41_FN2),
+        PINMUX_DATA(MSIOF2_RSCK_MARK, PORT41_FN3),
+        PINMUX_DATA(HSU_IQ_AGC2_MARK, PORT42_FN1),
+        PINMUX_DATA(PORT42_KEYOUT0_MARK, MSELBCR_MSEL2_1, PORT42_FN2),
+        PINMUX_DATA(HSU_IQ_AGC1_MARK, PORT43_FN1),
+        PINMUX_DATA(PORT43_KEYOUT1_MARK, MSELBCR_MSEL2_1, PORT43_FN2),
+        PINMUX_DATA(HSU_IQ_AGC0_MARK, PORT44_FN1),
+        PINMUX_DATA(PORT44_KEYOUT2_MARK, MSELBCR_MSEL2_1, PORT44_FN2),
+        PINMUX_DATA(HSU_IQ_AGC_ST_MARK, PORT45_FN1),
+        PINMUX_DATA(PORT45_KEYOUT3_MARK, MSELBCR_MSEL2_1, PORT45_FN2),
+        PINMUX_DATA(HSU_IQ_PDO_MARK, PORT46_FN1),
+        PINMUX_DATA(PORT46_KEYOUT4_MARK, MSELBCR_MSEL2_1, PORT46_FN2),
+        PINMUX_DATA(HSU_IQ_PYO_MARK, PORT47_FN1),
+        PINMUX_DATA(PORT47_KEYOUT5_MARK, MSELBCR_MSEL2_1, PORT47_FN2),
+        PINMUX_DATA(HSU_EN_TXMUX_G3MO_MARK, PORT48_FN1),
+        PINMUX_DATA(PORT48_KEYIN0_MARK, MSELBCR_MSEL2_1, PORT48_FN2),
+        PINMUX_DATA(HSU_I_TXMUX_G3MO_MARK, PORT49_FN1),
+        PINMUX_DATA(PORT49_KEYIN1_MARK, MSELBCR_MSEL2_1, PORT49_FN2),
+        PINMUX_DATA(HSU_Q_TXMUX_G3MO_MARK, PORT50_FN1),
+        PINMUX_DATA(PORT50_KEYIN2_MARK, MSELBCR_MSEL2_1, PORT50_FN2),
+        PINMUX_DATA(HSU_SYO_MARK, PORT51_FN1),
+        PINMUX_DATA(PORT51_MSIOF2_TSYNC_MARK, PORT51_FN2),
+        PINMUX_DATA(HSU_SDO_MARK, PORT52_FN1),
+        PINMUX_DATA(PORT52_MSIOF2_TSCK_MARK, PORT52_FN2),
+        PINMUX_DATA(HSU_TGTTI_G3MO_MARK, PORT53_FN1),
+        PINMUX_DATA(PORT53_MSIOF2_TXD_MARK, PORT53_FN2),
+        PINMUX_DATA(B_TIME_STAMP_MARK, PORT54_FN1),
+        PINMUX_DATA(PORT54_MSIOF2_RXD_MARK, PORT54_FN2),
+        PINMUX_DATA(HSU_SDI_MARK, PORT55_FN1),
+        PINMUX_DATA(PORT55_KEYIN3_MARK, MSELBCR_MSEL2_1, PORT55_FN2),
+        PINMUX_DATA(HSU_SCO_MARK, PORT56_FN1),
+        PINMUX_DATA(PORT56_KEYIN4_MARK, MSELBCR_MSEL2_1, PORT56_FN2),
+        PINMUX_DATA(HSU_DREQ_MARK, PORT57_FN1),
+        PINMUX_DATA(PORT57_KEYIN5_MARK, MSELBCR_MSEL2_1, PORT57_FN2),
+        PINMUX_DATA(HSU_DACK_MARK, PORT58_FN1),
+        PINMUX_DATA(PORT58_KEYIN6_MARK, MSELBCR_MSEL2_1, PORT58_FN2),
+        PINMUX_DATA(HSU_CLK61M_MARK, PORT59_FN1),
+        PINMUX_DATA(PORT59_MSIOF2_SS1_MARK, PORT59_FN2),
+        PINMUX_DATA(HSU_XRST_MARK, PORT60_FN1),
+        PINMUX_DATA(PORT60_MSIOF2_SS2_MARK, PORT60_FN2),
+        PINMUX_DATA(PCMCLKO_MARK, PORT61_FN1),
+        PINMUX_DATA(SYNC8KO_MARK, PORT62_FN1),
+        PINMUX_DATA(DNPCM_A_MARK, PORT63_FN1),
+        PINMUX_DATA(UPPCM_A_MARK, PORT64_FN1),
+        PINMUX_DATA(XTALB1L_MARK, PORT65_FN1),
+        PINMUX_DATA(GPS_AGC1_MARK, PORT66_FN1),
+        PINMUX_DATA(SCIFA0_RTS_MARK, PORT66_FN2),
+        PINMUX_DATA(GPS_AGC2_MARK, PORT67_FN1),
+        PINMUX_DATA(SCIFA0_SCK_MARK, PORT67_FN2),
+        PINMUX_DATA(GPS_AGC3_MARK, PORT68_FN1),
+        PINMUX_DATA(SCIFA0_TXD_MARK, PORT68_FN2),
+        PINMUX_DATA(GPS_AGC4_MARK, PORT69_FN1),
+        PINMUX_DATA(SCIFA0_RXD_MARK, PORT69_FN2),
+        PINMUX_DATA(GPS_PWRD_MARK, PORT70_FN1),
+        PINMUX_DATA(SCIFA0_CTS_MARK, PORT70_FN2),
+        PINMUX_DATA(GPS_IM_MARK, PORT71_FN1),
+        PINMUX_DATA(GPS_IS_MARK, PORT72_FN1),
+        PINMUX_DATA(GPS_QM_MARK, PORT73_FN1),
+        PINMUX_DATA(GPS_QS_MARK, PORT74_FN1),
+        PINMUX_DATA(SIUBOMC_MARK, PORT75_FN1),
+        PINMUX_DATA(TPU2TO0_MARK, PORT75_FN3),
+        PINMUX_DATA(SIUCKB_MARK, PORT76_FN1),
+        PINMUX_DATA(TPU2TO1_MARK, PORT76_FN3),
+        PINMUX_DATA(SIUBOLR_MARK, PORT77_FN1),
+        PINMUX_DATA(BBIF2_TSYNC_MARK, PORT77_FN2),
+        PINMUX_DATA(TPU2TO2_MARK, PORT77_FN3),
+        PINMUX_DATA(SIUBOBT_MARK, PORT78_FN1),
+        PINMUX_DATA(BBIF2_TSCK_MARK, PORT78_FN2),
+        PINMUX_DATA(TPU2TO3_MARK, PORT78_FN3),
+        PINMUX_DATA(SIUBOSLD_MARK, PORT79_FN1),
+        PINMUX_DATA(BBIF2_TXD_MARK, PORT79_FN2),
+        PINMUX_DATA(TPU3TO0_MARK, PORT79_FN3),
+        PINMUX_DATA(SIUBILR_MARK, PORT80_FN1),
+        PINMUX_DATA(TPU3TO1_MARK, PORT80_FN3),
+        PINMUX_DATA(SIUBIBT_MARK, PORT81_FN1),
+        PINMUX_DATA(TPU3TO2_MARK, PORT81_FN3),
+        PINMUX_DATA(SIUBISLD_MARK, PORT82_FN1),
+        PINMUX_DATA(TPU3TO3_MARK, PORT82_FN3),
+        PINMUX_DATA(NMI_MARK, PORT83_FN1),
+        PINMUX_DATA(TPU4TO0_MARK, PORT83_FN3),
+        PINMUX_DATA(DNPCM_M_MARK, PORT84_FN1),
+        PINMUX_DATA(TPU4TO1_MARK, PORT84_FN3),
+        PINMUX_DATA(TPU4TO2_MARK, PORT85_FN3),
+        PINMUX_DATA(TPU4TO3_MARK, PORT86_FN3),
+        PINMUX_DATA(IRQ_TMPB_MARK, PORT87_FN1),
+        PINMUX_DATA(PWEN_MARK, PORT88_FN1),
+        PINMUX_DATA(MFG1_OUT1_MARK, PORT88_FN2),
+        PINMUX_DATA(OVCN_MARK, PORT89_FN1),
+        PINMUX_DATA(MFG1_IN1_MARK, PORT89_FN2),
+        PINMUX_DATA(OVCN2_MARK, PORT90_FN1),
+        PINMUX_DATA(MFG1_IN2_MARK, PORT90_FN2),
+
+        /* 49-3 (FN) */
+        PINMUX_DATA(RFSPO1_MARK, PORT91_FN1),
+        PINMUX_DATA(RFSPO2_MARK, PORT92_FN1),
+        PINMUX_DATA(RFSPO3_MARK, PORT93_FN1),
+        PINMUX_DATA(PORT93_VIO_CKO2_MARK, PORT93_FN2),
+        PINMUX_DATA(USBTERM_MARK, PORT94_FN1),
+        PINMUX_DATA(EXTLP_MARK, PORT94_FN2),
+        PINMUX_DATA(IDIN_MARK, PORT95_FN1),
+        PINMUX_DATA(SCIFA5_CTS_MARK, PORT96_FN1),
+        PINMUX_DATA(MFG0_IN1_MARK, PORT96_FN2),
+        PINMUX_DATA(SCIFA5_RTS_MARK, PORT97_FN1),
+        PINMUX_DATA(MFG0_IN2_MARK, PORT97_FN2),
+        PINMUX_DATA(SCIFA5_RXD_MARK, PORT98_FN1),
+        PINMUX_DATA(SCIFA5_TXD_MARK, PORT99_FN1),
+        PINMUX_DATA(SCIFA5_SCK_MARK, PORT100_FN1),
+        PINMUX_DATA(MFG0_OUT1_MARK, PORT100_FN2),
+        PINMUX_DATA(A0_EA0_MARK, PORT101_FN1),
+        PINMUX_DATA(BS_MARK, PORT101_FN2),
+        PINMUX_DATA(A14_EA14_MARK, PORT102_FN1),
+        PINMUX_DATA(PORT102_KEYOUT0_MARK, MSELBCR_MSEL2_0, PORT102_FN2),
+        PINMUX_DATA(A15_EA15_MARK, PORT103_FN1),
+        PINMUX_DATA(PORT103_KEYOUT1_MARK, MSELBCR_MSEL2_0, PORT103_FN2),
+        PINMUX_DATA(DV_CLKOL_MARK, PORT103_FN3),
+        PINMUX_DATA(A16_EA16_MARK, PORT104_FN1),
+        PINMUX_DATA(PORT104_KEYOUT2_MARK, MSELBCR_MSEL2_0, PORT104_FN2),
+        PINMUX_DATA(DV_VSYNCL_MARK, PORT104_FN3),
+        PINMUX_DATA(MSIOF0_SS1_MARK, PORT104_FN4),
+        PINMUX_DATA(A17_EA17_MARK, PORT105_FN1),
+        PINMUX_DATA(PORT105_KEYOUT3_MARK, MSELBCR_MSEL2_0, PORT105_FN2),
+        PINMUX_DATA(DV_HSYNCL_MARK, PORT105_FN3),
+        PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT105_FN4),
+        PINMUX_DATA(A18_EA18_MARK, PORT106_FN1),
+        PINMUX_DATA(PORT106_KEYOUT4_MARK, MSELBCR_MSEL2_0, PORT106_FN2),
+        PINMUX_DATA(DV_DL0_MARK, PORT106_FN3),
+        PINMUX_DATA(MSIOF0_TSCK_MARK, PORT106_FN4),
+        PINMUX_DATA(A19_EA19_MARK, PORT107_FN1),
+        PINMUX_DATA(PORT107_KEYOUT5_MARK, MSELBCR_MSEL2_0, PORT107_FN2),
+        PINMUX_DATA(DV_DL1_MARK, PORT107_FN3),
+        PINMUX_DATA(MSIOF0_TXD_MARK, PORT107_FN4),
+        PINMUX_DATA(A20_EA20_MARK, PORT108_FN1),
+        PINMUX_DATA(PORT108_KEYIN0_MARK, MSELBCR_MSEL2_0, PORT108_FN2),
+        PINMUX_DATA(DV_DL2_MARK, PORT108_FN3),
+        PINMUX_DATA(MSIOF0_RSCK_MARK, PORT108_FN4),
+        PINMUX_DATA(A21_EA21_MARK, PORT109_FN1),
+        PINMUX_DATA(PORT109_KEYIN1_MARK, MSELBCR_MSEL2_0, PORT109_FN2),
+        PINMUX_DATA(DV_DL3_MARK, PORT109_FN3),
+        PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT109_FN4),
+        PINMUX_DATA(A22_EA22_MARK, PORT110_FN1),
+        PINMUX_DATA(PORT110_KEYIN2_MARK, MSELBCR_MSEL2_0, PORT110_FN2),
+        PINMUX_DATA(DV_DL4_MARK, PORT110_FN3),
+        PINMUX_DATA(MSIOF0_MCK0_MARK, PORT110_FN4),
+        PINMUX_DATA(A23_EA23_MARK, PORT111_FN1),
+        PINMUX_DATA(PORT111_KEYIN3_MARK, MSELBCR_MSEL2_0, PORT111_FN2),
+        PINMUX_DATA(DV_DL5_MARK, PORT111_FN3),
+        PINMUX_DATA(MSIOF0_MCK1_MARK, PORT111_FN4),
+        PINMUX_DATA(A24_EA24_MARK, PORT112_FN1),
+        PINMUX_DATA(PORT112_KEYIN4_MARK, MSELBCR_MSEL2_0, PORT112_FN2),
+        PINMUX_DATA(DV_DL6_MARK, PORT112_FN3),
+        PINMUX_DATA(MSIOF0_RXD_MARK, PORT112_FN4),
+        PINMUX_DATA(A25_EA25_MARK, PORT113_FN1),
+        PINMUX_DATA(PORT113_KEYIN5_MARK, MSELBCR_MSEL2_0, PORT113_FN2),
+        PINMUX_DATA(DV_DL7_MARK, PORT113_FN3),
+        PINMUX_DATA(MSIOF0_SS2_MARK, PORT113_FN4),
+        PINMUX_DATA(A26_MARK, PORT114_FN1),
+        PINMUX_DATA(PORT113_KEYIN6_MARK, MSELBCR_MSEL2_0, PORT114_FN2),
+        PINMUX_DATA(DV_CLKIL_MARK, PORT114_FN3),
+        PINMUX_DATA(D0_ED0_NAF0_MARK, PORT115_FN1),
+        PINMUX_DATA(D1_ED1_NAF1_MARK, PORT116_FN1),
+        PINMUX_DATA(D2_ED2_NAF2_MARK, PORT117_FN1),
+        PINMUX_DATA(D3_ED3_NAF3_MARK, PORT118_FN1),
+        PINMUX_DATA(D4_ED4_NAF4_MARK, PORT119_FN1),
+        PINMUX_DATA(D5_ED5_NAF5_MARK, PORT120_FN1),
+        PINMUX_DATA(D6_ED6_NAF6_MARK, PORT121_FN1),
+        PINMUX_DATA(D7_ED7_NAF7_MARK, PORT122_FN1),
+        PINMUX_DATA(D8_ED8_NAF8_MARK, PORT123_FN1),
+        PINMUX_DATA(D9_ED9_NAF9_MARK, PORT124_FN1),
+        PINMUX_DATA(D10_ED10_NAF10_MARK, PORT125_FN1),
+        PINMUX_DATA(D11_ED11_NAF11_MARK, PORT126_FN1),
+        PINMUX_DATA(D12_ED12_NAF12_MARK, PORT127_FN1),
+        PINMUX_DATA(D13_ED13_NAF13_MARK, PORT128_FN1),
+        PINMUX_DATA(D14_ED14_NAF14_MARK, PORT129_FN1),
+        PINMUX_DATA(D15_ED15_NAF15_MARK, PORT130_FN1),
+        PINMUX_DATA(CS4_MARK, PORT131_FN1),
+        PINMUX_DATA(CS5A_MARK, PORT132_FN1),
+        PINMUX_DATA(CS5B_MARK, PORT133_FN1),
+        PINMUX_DATA(FCE1_MARK, PORT133_FN2),
+        PINMUX_DATA(CS6B_MARK, PORT134_FN1),
+        PINMUX_DATA(XCS2_MARK, PORT134_FN2),
+        PINMUX_DATA(FCE0_MARK, PORT135_FN1),
+        PINMUX_DATA(CS6A_MARK, PORT136_FN1),
+        PINMUX_DATA(DACK0_MARK, PORT136_FN2),
+        PINMUX_DATA(WAIT_MARK, PORT137_FN1),
+        PINMUX_DATA(DREQ0_MARK, PORT137_FN2),
+        PINMUX_DATA(RD_XRD_MARK, PORT138_FN1),
+        PINMUX_DATA(A27_MARK, PORT139_FN1),
+        PINMUX_DATA(RDWR_XWE_MARK, PORT139_FN2),
+        PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT140_FN1),
+        PINMUX_DATA(WE1_XWR1_MARK, PORT141_FN1),
+        PINMUX_DATA(FRB_MARK, PORT142_FN1),
+        PINMUX_DATA(CKO_MARK, PORT143_FN1),
+        PINMUX_DATA(NBRSTOUT_MARK, PORT144_FN1),
+        PINMUX_DATA(NBRST_MARK, PORT145_FN1),
+
+        /* 49-4 (FN) */
+        PINMUX_DATA(RFSPO0_MARK, PORT146_FN1),
+        PINMUX_DATA(PORT146_VIO_CKO2_MARK, PORT146_FN2),
+        PINMUX_DATA(TSTMD_MARK, PORT147_FN1),
+        PINMUX_DATA(VIO_VD_MARK, PORT148_FN1),
+        PINMUX_DATA(VIO_HD_MARK, PORT149_FN1),
+        PINMUX_DATA(VIO_D0_MARK, PORT150_FN1),
+        PINMUX_DATA(VIO_D1_MARK, PORT151_FN1),
+        PINMUX_DATA(VIO_D2_MARK, PORT152_FN1),
+        PINMUX_DATA(VIO_D3_MARK, PORT153_FN1),
+        PINMUX_DATA(VIO_D4_MARK, PORT154_FN1),
+        PINMUX_DATA(VIO_D5_MARK, PORT155_FN1),
+        PINMUX_DATA(VIO_D6_MARK, PORT156_FN1),
+        PINMUX_DATA(VIO_D7_MARK, PORT157_FN1),
+        PINMUX_DATA(VIO_D8_MARK, PORT158_FN1),
+        PINMUX_DATA(VIO_D9_MARK, PORT159_FN1),
+        PINMUX_DATA(VIO_D10_MARK, PORT160_FN1),
+        PINMUX_DATA(VIO_D11_MARK, PORT161_FN1),
+        PINMUX_DATA(VIO_D12_MARK, PORT162_FN1),
+        PINMUX_DATA(VIO_D13_MARK, PORT163_FN1),
+        PINMUX_DATA(VIO_D14_MARK, PORT164_FN1),
+        PINMUX_DATA(VIO_D15_MARK, PORT165_FN1),
+        PINMUX_DATA(VIO_CLK_MARK, PORT166_FN1),
+        PINMUX_DATA(VIO_FIELD_MARK, PORT167_FN1),
+        PINMUX_DATA(VIO_CKO_MARK, PORT168_FN1),
+        PINMUX_DATA(MFG3_IN1_MARK, PORT169_FN2),
+        PINMUX_DATA(MFG3_IN2_MARK, PORT170_FN2),
+        PINMUX_DATA(M9_SLCD_A01_MARK, PORT171_FN1),
+        PINMUX_DATA(MFG3_OUT1_MARK, PORT171_FN2),
+        PINMUX_DATA(TPU0TO0_MARK, PORT171_FN3),
+        PINMUX_DATA(M10_SLCD_CK1_MARK, PORT172_FN1),
+        PINMUX_DATA(MFG4_IN1_MARK, PORT172_FN2),
+        PINMUX_DATA(TPU0TO1_MARK, PORT172_FN3),
+        PINMUX_DATA(M11_SLCD_SO1_MARK, PORT173_FN1),
+        PINMUX_DATA(MFG4_IN2_MARK, PORT173_FN2),
+        PINMUX_DATA(TPU0TO2_MARK, PORT173_FN3),
+        PINMUX_DATA(M12_SLCD_CE1_MARK, PORT174_FN1),
+        PINMUX_DATA(MFG4_OUT1_MARK, PORT174_FN2),
+        PINMUX_DATA(TPU0TO3_MARK, PORT174_FN3),
+        PINMUX_DATA(LCDD0_MARK, PORT175_FN1),
+        PINMUX_DATA(PORT175_KEYOUT0_MARK, PORT175_FN2),
+        PINMUX_DATA(DV_D0_MARK, PORT175_FN3),
+        PINMUX_DATA(SIUCKA_MARK, PORT175_FN4),
+        PINMUX_DATA(MFG0_OUT2_MARK, PORT175_FN5),
+        PINMUX_DATA(LCDD1_MARK, PORT176_FN1),
+        PINMUX_DATA(PORT176_KEYOUT1_MARK, PORT176_FN2),
+        PINMUX_DATA(DV_D1_MARK, PORT176_FN3),
+        PINMUX_DATA(SIUAOLR_MARK, PORT176_FN4),
+        PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT176_FN5),
+        PINMUX_DATA(LCDD2_MARK, PORT177_FN1),
+        PINMUX_DATA(PORT177_KEYOUT2_MARK, PORT177_FN2),
+        PINMUX_DATA(DV_D2_MARK, PORT177_FN3),
+        PINMUX_DATA(SIUAOBT_MARK, PORT177_FN4),
+        PINMUX_DATA(BBIF2_TSCK1_MARK, PORT177_FN5),
+        PINMUX_DATA(LCDD3_MARK, PORT178_FN1),
+        PINMUX_DATA(PORT178_KEYOUT3_MARK, PORT178_FN2),
+        PINMUX_DATA(DV_D3_MARK, PORT178_FN3),
+        PINMUX_DATA(SIUAOSLD_MARK, PORT178_FN4),
+        PINMUX_DATA(BBIF2_TXD1_MARK, PORT178_FN5),
+        PINMUX_DATA(LCDD4_MARK, PORT179_FN1),
+        PINMUX_DATA(PORT179_KEYOUT4_MARK, PORT179_FN2),
+        PINMUX_DATA(DV_D4_MARK, PORT179_FN3),
+        PINMUX_DATA(SIUAISPD_MARK, PORT179_FN4),
+        PINMUX_DATA(MFG1_OUT2_MARK, PORT179_FN5),
+        PINMUX_DATA(LCDD5_MARK, PORT180_FN1),
+        PINMUX_DATA(PORT180_KEYOUT5_MARK, PORT180_FN2),
+        PINMUX_DATA(DV_D5_MARK, PORT180_FN3),
+        PINMUX_DATA(SIUAILR_MARK, PORT180_FN4),
+        PINMUX_DATA(MFG2_OUT2_MARK, PORT180_FN5),
+        PINMUX_DATA(LCDD6_MARK, PORT181_FN1),
+        PINMUX_DATA(DV_D6_MARK, PORT181_FN3),
+        PINMUX_DATA(SIUAIBT_MARK, PORT181_FN4),
+        PINMUX_DATA(MFG3_OUT2_MARK, PORT181_FN5),
+        PINMUX_DATA(XWR2_MARK, PORT181_FN7),
+        PINMUX_DATA(LCDD7_MARK, PORT182_FN1),
+        PINMUX_DATA(DV_D7_MARK, PORT182_FN3),
+        PINMUX_DATA(SIUAISLD_MARK, PORT182_FN4),
+        PINMUX_DATA(MFG4_OUT2_MARK, PORT182_FN5),
+        PINMUX_DATA(XWR3_MARK, PORT182_FN7),
+        PINMUX_DATA(LCDD8_MARK, PORT183_FN1),
+        PINMUX_DATA(DV_D8_MARK, PORT183_FN3),
+        PINMUX_DATA(D16_MARK, PORT183_FN6),
+        PINMUX_DATA(ED16_MARK, PORT183_FN7),
+        PINMUX_DATA(LCDD9_MARK, PORT184_FN1),
+        PINMUX_DATA(DV_D9_MARK, PORT184_FN3),
+        PINMUX_DATA(D17_MARK, PORT184_FN6),
+        PINMUX_DATA(ED17_MARK, PORT184_FN7),
+        PINMUX_DATA(LCDD10_MARK, PORT185_FN1),
+        PINMUX_DATA(DV_D10_MARK, PORT185_FN3),
+        PINMUX_DATA(D18_MARK, PORT185_FN6),
+        PINMUX_DATA(ED18_MARK, PORT185_FN7),
+        PINMUX_DATA(LCDD11_MARK, PORT186_FN1),
+        PINMUX_DATA(DV_D11_MARK, PORT186_FN3),
+        PINMUX_DATA(D19_MARK, PORT186_FN6),
+        PINMUX_DATA(ED19_MARK, PORT186_FN7),
+        PINMUX_DATA(LCDD12_MARK, PORT187_FN1),
+        PINMUX_DATA(DV_D12_MARK, PORT187_FN3),
+        PINMUX_DATA(D20_MARK, PORT187_FN6),
+        PINMUX_DATA(ED20_MARK, PORT187_FN7),
+        PINMUX_DATA(LCDD13_MARK, PORT188_FN1),
+        PINMUX_DATA(DV_D13_MARK, PORT188_FN3),
+        PINMUX_DATA(D21_MARK, PORT188_FN6),
+        PINMUX_DATA(ED21_MARK, PORT188_FN7),
+        PINMUX_DATA(LCDD14_MARK, PORT189_FN1),
+        PINMUX_DATA(DV_D14_MARK, PORT189_FN3),
+        PINMUX_DATA(D22_MARK, PORT189_FN6),
+        PINMUX_DATA(ED22_MARK, PORT189_FN7),
+        PINMUX_DATA(LCDD15_MARK, PORT190_FN1),
+        PINMUX_DATA(DV_D15_MARK, PORT190_FN3),
+        PINMUX_DATA(D23_MARK, PORT190_FN6),
+        PINMUX_DATA(ED23_MARK, PORT190_FN7),
+        PINMUX_DATA(LCDD16_MARK, PORT191_FN1),
+        PINMUX_DATA(DV_HSYNC_MARK, PORT191_FN3),
+        PINMUX_DATA(D24_MARK, PORT191_FN6),
+        PINMUX_DATA(ED24_MARK, PORT191_FN7),
+        PINMUX_DATA(LCDD17_MARK, PORT192_FN1),
+        PINMUX_DATA(DV_VSYNC_MARK, PORT192_FN3),
+        PINMUX_DATA(D25_MARK, PORT192_FN6),
+        PINMUX_DATA(ED25_MARK, PORT192_FN7),
+        PINMUX_DATA(LCDD18_MARK, PORT193_FN1),
+        PINMUX_DATA(DREQ2_MARK, PORT193_FN2),
+        PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT193_FN5),
+        PINMUX_DATA(D26_MARK, PORT193_FN6),
+        PINMUX_DATA(ED26_MARK, PORT193_FN7),
+        PINMUX_DATA(LCDD19_MARK, PORT194_FN1),
+        PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT194_FN5),
+        PINMUX_DATA(D27_MARK, PORT194_FN6),
+        PINMUX_DATA(ED27_MARK, PORT194_FN7),
+        PINMUX_DATA(LCDD20_MARK, PORT195_FN1),
+        PINMUX_DATA(TS_SPSYNC1_MARK, PORT195_FN2),
+        PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT195_FN5),
+        PINMUX_DATA(D28_MARK, PORT195_FN6),
+        PINMUX_DATA(ED28_MARK, PORT195_FN7),
+        PINMUX_DATA(LCDD21_MARK, PORT196_FN1),
+        PINMUX_DATA(TS_SDAT1_MARK, PORT196_FN2),
+        PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT196_FN5),
+        PINMUX_DATA(D29_MARK, PORT196_FN6),
+        PINMUX_DATA(ED29_MARK, PORT196_FN7),
+        PINMUX_DATA(LCDD22_MARK, PORT197_FN1),
+        PINMUX_DATA(TS_SDEN1_MARK, PORT197_FN2),
+        PINMUX_DATA(MSIOF0L_SS1_MARK, PORT197_FN5),
+        PINMUX_DATA(D30_MARK, PORT197_FN6),
+        PINMUX_DATA(ED30_MARK, PORT197_FN7),
+        PINMUX_DATA(LCDD23_MARK, PORT198_FN1),
+        PINMUX_DATA(TS_SCK1_MARK, PORT198_FN2),
+        PINMUX_DATA(MSIOF0L_SS2_MARK, PORT198_FN5),
+        PINMUX_DATA(D31_MARK, PORT198_FN6),
+        PINMUX_DATA(ED31_MARK, PORT198_FN7),
+        PINMUX_DATA(LCDDCK_MARK, PORT199_FN1),
+        PINMUX_DATA(LCDWR_MARK, PORT199_FN2),
+        PINMUX_DATA(DV_CKO_MARK, PORT199_FN3),
+        PINMUX_DATA(SIUAOSPD_MARK, PORT199_FN4),
+        PINMUX_DATA(LCDRD_MARK, PORT200_FN1),
+        PINMUX_DATA(DACK2_MARK, PORT200_FN2),
+        PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT200_FN5),
+
+        /* 49-5 (FN) */
+        PINMUX_DATA(LCDHSYN_MARK, PORT201_FN1),
+        PINMUX_DATA(LCDCS_MARK, PORT201_FN2),
+        PINMUX_DATA(LCDCS2_MARK, PORT201_FN3),
+        PINMUX_DATA(DACK3_MARK, PORT201_FN4),
+        PINMUX_DATA(LCDDISP_MARK, PORT202_FN1),
+        PINMUX_DATA(LCDRS_MARK, PORT202_FN2),
+        PINMUX_DATA(DREQ3_MARK, PORT202_FN4),
+        PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT202_FN5),
+        PINMUX_DATA(LCDCSYN_MARK, PORT203_FN1),
+        PINMUX_DATA(LCDCSYN2_MARK, PORT203_FN2),
+        PINMUX_DATA(DV_CKI_MARK, PORT203_FN3),
+        PINMUX_DATA(LCDLCLK_MARK, PORT204_FN1),
+        PINMUX_DATA(DREQ1_MARK, PORT204_FN3),
+        PINMUX_DATA(MSIOF0L_RXD_MARK, PORT204_FN5),
+        PINMUX_DATA(LCDDON_MARK, PORT205_FN1),
+        PINMUX_DATA(LCDDON2_MARK, PORT205_FN2),
+        PINMUX_DATA(DACK1_MARK, PORT205_FN3),
+        PINMUX_DATA(MSIOF0L_TXD_MARK, PORT205_FN5),
+        PINMUX_DATA(VIO_DR0_MARK, PORT206_FN1),
+        PINMUX_DATA(VIO_DR1_MARK, PORT207_FN1),
+        PINMUX_DATA(VIO_DR2_MARK, PORT208_FN1),
+        PINMUX_DATA(VIO_DR3_MARK, PORT209_FN1),
+        PINMUX_DATA(VIO_DR4_MARK, PORT210_FN1),
+        PINMUX_DATA(VIO_DR5_MARK, PORT211_FN1),
+        PINMUX_DATA(VIO_DR6_MARK, PORT212_FN1),
+        PINMUX_DATA(VIO_DR7_MARK, PORT213_FN1),
+        PINMUX_DATA(VIO_VDR_MARK, PORT214_FN1),
+        PINMUX_DATA(VIO_HDR_MARK, PORT215_FN1),
+        PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN1),
+        PINMUX_DATA(VIO_CKOR_MARK, PORT217_FN1),
+        PINMUX_DATA(SCIFA1_TXD_MARK, PORT220_FN2),
+        PINMUX_DATA(GPS_PGFA0_MARK, PORT220_FN3),
+        PINMUX_DATA(SCIFA1_SCK_MARK, PORT221_FN2),
+        PINMUX_DATA(GPS_PGFA1_MARK, PORT221_FN3),
+        PINMUX_DATA(SCIFA1_RTS_MARK, PORT222_FN2),
+        PINMUX_DATA(GPS_EPPSINMON_MARK, PORT222_FN3),
+        PINMUX_DATA(SCIFA1_RXD_MARK, PORT223_FN2),
+        PINMUX_DATA(SCIFA1_CTS_MARK, PORT224_FN2),
+        PINMUX_DATA(MSIOF1_TXD_MARK, PORT225_FN1),
+        PINMUX_DATA(SCIFA1_TXD2_MARK, PORT225_FN2),
+        PINMUX_DATA(GPS_TXD_MARK, PORT225_FN3),
+        PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT226_FN1),
+        PINMUX_DATA(SCIFA1_CTS2_MARK, PORT226_FN2),
+        PINMUX_DATA(I2C_SDA2_MARK, PORT226_FN3),
+        PINMUX_DATA(MSIOF1_TSCK_MARK, PORT227_FN1),
+        PINMUX_DATA(SCIFA1_SCK2_MARK, PORT227_FN2),
+        PINMUX_DATA(MSIOF1_RXD_MARK, PORT228_FN1),
+        PINMUX_DATA(SCIFA1_RXD2_MARK, PORT228_FN2),
+        PINMUX_DATA(GPS_RXD_MARK, PORT228_FN3),
+        PINMUX_DATA(MSIOF1_RSCK_MARK, PORT229_FN1),
+        PINMUX_DATA(SCIFA1_RTS2_MARK, PORT229_FN2),
+        PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT230_FN1),
+        PINMUX_DATA(I2C_SCL2_MARK, PORT230_FN3),
+        PINMUX_DATA(MSIOF1_MCK0_MARK, PORT231_FN1),
+        PINMUX_DATA(MSIOF1_MCK1_MARK, PORT232_FN1),
+        PINMUX_DATA(MSIOF1_SS1_MARK, PORT233_FN1),
+        PINMUX_DATA(EDBGREQ3_MARK, PORT233_FN2),
+        PINMUX_DATA(MSIOF1_SS2_MARK, PORT234_FN1),
+        PINMUX_DATA(PORT236_IROUT_MARK, PORT236_FN1),
+        PINMUX_DATA(IRDA_OUT_MARK, PORT236_FN2),
+        PINMUX_DATA(IRDA_IN_MARK, PORT237_FN2),
+        PINMUX_DATA(IRDA_FIRSEL_MARK, PORT238_FN1),
+        PINMUX_DATA(TPU1TO0_MARK, PORT239_FN3),
+        PINMUX_DATA(TS_SPSYNC3_MARK, PORT239_FN4),
+        PINMUX_DATA(TPU1TO1_MARK, PORT240_FN3),
+        PINMUX_DATA(TS_SDAT3_MARK, PORT240_FN4),
+        PINMUX_DATA(TPU1TO2_MARK, PORT241_FN3),
+        PINMUX_DATA(TS_SDEN3_MARK, PORT241_FN4),
+        PINMUX_DATA(PORT241_MSIOF2_SS1_MARK, PORT241_FN5),
+        PINMUX_DATA(TPU1TO3_MARK, PORT242_FN3),
+        PINMUX_DATA(PORT242_MSIOF2_TSCK_MARK, PORT242_FN5),
+        PINMUX_DATA(M13_BSW_MARK, PORT243_FN2),
+        PINMUX_DATA(PORT243_MSIOF2_TSYNC_MARK, PORT243_FN5),
+        PINMUX_DATA(M14_GSW_MARK, PORT244_FN2),
+        PINMUX_DATA(PORT244_MSIOF2_TXD_MARK, PORT244_FN5),
+        PINMUX_DATA(PORT245_IROUT_MARK, PORT245_FN1),
+        PINMUX_DATA(M15_RSW_MARK, PORT245_FN2),
+        PINMUX_DATA(SOUT3_MARK, PORT246_FN1),
+        PINMUX_DATA(SCIFA2_TXD1_MARK, PORT246_FN2),
+        PINMUX_DATA(SIN3_MARK, PORT247_FN1),
+        PINMUX_DATA(SCIFA2_RXD1_MARK, PORT247_FN2),
+        PINMUX_DATA(XRTS3_MARK, PORT248_FN1),
+        PINMUX_DATA(SCIFA2_RTS1_MARK, PORT248_FN2),
+        PINMUX_DATA(PORT248_MSIOF2_SS2_MARK, PORT248_FN5),
+        PINMUX_DATA(XCTS3_MARK, PORT249_FN1),
+        PINMUX_DATA(SCIFA2_CTS1_MARK, PORT249_FN2),
+        PINMUX_DATA(PORT249_MSIOF2_RXD_MARK, PORT249_FN5),
+        PINMUX_DATA(DINT_MARK, PORT250_FN1),
+        PINMUX_DATA(SCIFA2_SCK1_MARK, PORT250_FN2),
+        PINMUX_DATA(TS_SCK3_MARK, PORT250_FN4),
+        PINMUX_DATA(SDHICLK0_MARK, PORT251_FN1),
+        PINMUX_DATA(TCK2_MARK, PORT251_FN2),
+        PINMUX_DATA(SDHICD0_MARK, PORT252_FN1),
+        PINMUX_DATA(SDHID0_0_MARK, PORT253_FN1),
+        PINMUX_DATA(TMS2_MARK, PORT253_FN2),
+        PINMUX_DATA(SDHID0_1_MARK, PORT254_FN1),
+        PINMUX_DATA(TDO2_MARK, PORT254_FN2),
+        PINMUX_DATA(SDHID0_2_MARK, PORT255_FN1),
+        PINMUX_DATA(TDI2_MARK, PORT255_FN2),
+        PINMUX_DATA(SDHID0_3_MARK, PORT256_FN1),
+        PINMUX_DATA(RTCK2_MARK, PORT256_FN2),
+
+        /* 49-6 (FN) */
+        PINMUX_DATA(SDHICMD0_MARK, PORT257_FN1),
+        PINMUX_DATA(TRST2_MARK, PORT257_FN2),
+        PINMUX_DATA(SDHIWP0_MARK, PORT258_FN1),
+        PINMUX_DATA(EDBGREQ2_MARK, PORT258_FN2),
+        PINMUX_DATA(SDHICLK1_MARK, PORT259_FN1),
+        PINMUX_DATA(TCK3_MARK, PORT259_FN4),
+        PINMUX_DATA(SDHID1_0_MARK, PORT260_FN1),
+        PINMUX_DATA(M11_SLCD_SO2_MARK, PORT260_FN2),
+        PINMUX_DATA(TS_SPSYNC2_MARK, PORT260_FN3),
+        PINMUX_DATA(TMS3_MARK, PORT260_FN4),
+        PINMUX_DATA(SDHID1_1_MARK, PORT261_FN1),
+        PINMUX_DATA(M9_SLCD_AO2_MARK, PORT261_FN2),
+        PINMUX_DATA(TS_SDAT2_MARK, PORT261_FN3),
+        PINMUX_DATA(TDO3_MARK, PORT261_FN4),
+        PINMUX_DATA(SDHID1_2_MARK, PORT262_FN1),
+        PINMUX_DATA(M10_SLCD_CK2_MARK, PORT262_FN2),
+        PINMUX_DATA(TS_SDEN2_MARK, PORT262_FN3),
+        PINMUX_DATA(TDI3_MARK, PORT262_FN4),
+        PINMUX_DATA(SDHID1_3_MARK, PORT263_FN1),
+        PINMUX_DATA(M12_SLCD_CE2_MARK, PORT263_FN2),
+        PINMUX_DATA(TS_SCK2_MARK, PORT263_FN3),
+        PINMUX_DATA(RTCK3_MARK, PORT263_FN4),
+        PINMUX_DATA(SDHICMD1_MARK, PORT264_FN1),
+        PINMUX_DATA(TRST3_MARK, PORT264_FN4),
+        PINMUX_DATA(SDHICLK2_MARK, PORT265_FN1),
+        PINMUX_DATA(SCIFB_SCK_MARK, PORT265_FN2),
+        PINMUX_DATA(SDHID2_0_MARK, PORT266_FN1),
+        PINMUX_DATA(SCIFB_TXD_MARK, PORT266_FN2),
+        PINMUX_DATA(SDHID2_1_MARK, PORT267_FN1),
+        PINMUX_DATA(SCIFB_CTS_MARK, PORT267_FN2),
+        PINMUX_DATA(SDHID2_2_MARK, PORT268_FN1),
+        PINMUX_DATA(SCIFB_RXD_MARK, PORT268_FN2),
+        PINMUX_DATA(SDHID2_3_MARK, PORT269_FN1),
+        PINMUX_DATA(SCIFB_RTS_MARK, PORT269_FN2),
+        PINMUX_DATA(SDHICMD2_MARK, PORT270_FN1),
+        PINMUX_DATA(RESETOUTS_MARK, PORT271_FN1),
+        PINMUX_DATA(DIVLOCK_MARK, PORT272_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_273() _273(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+        /* 49-1 -> 49-6 (GPIO) */
+        GPIO_PORT_273(),
+
+        /* Special Pull-up / Pull-down Functions */
+        GPIO_FN(PORT48_KEYIN0_PU), GPIO_FN(PORT49_KEYIN1_PU),
+        GPIO_FN(PORT50_KEYIN2_PU), GPIO_FN(PORT55_KEYIN3_PU),
+        GPIO_FN(PORT56_KEYIN4_PU), GPIO_FN(PORT57_KEYIN5_PU),
+        GPIO_FN(PORT58_KEYIN6_PU),
+
+        /* 49-1 (FN) */
+        GPIO_FN(VBUS0), GPIO_FN(CPORT0), GPIO_FN(CPORT1), GPIO_FN(CPORT2),
+        GPIO_FN(CPORT3), GPIO_FN(CPORT4), GPIO_FN(CPORT5), GPIO_FN(CPORT6),
+        GPIO_FN(CPORT7), GPIO_FN(CPORT8), GPIO_FN(CPORT9), GPIO_FN(CPORT10),
+        GPIO_FN(CPORT11), GPIO_FN(SIN2), GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+        GPIO_FN(CPORT13), GPIO_FN(RFSPO4), GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+        GPIO_FN(CPORT15), GPIO_FN(CPORT16), GPIO_FN(CPORT17), GPIO_FN(SOUT2),
+        GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(CPORT19), GPIO_FN(CPORT20),
+        GPIO_FN(RFSPO6), GPIO_FN(CPORT21), GPIO_FN(STATUS0), GPIO_FN(CPORT22),
+        GPIO_FN(STATUS1), GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+        GPIO_FN(MPORT0), GPIO_FN(MPORT1), GPIO_FN(B_SYNLD1), GPIO_FN(B_SYNLD2),
+        GPIO_FN(XMAINPS), GPIO_FN(XDIVPS), GPIO_FN(XIDRST), GPIO_FN(IDCLK),
+        GPIO_FN(IDIO), GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD),
+        GPIO_FN(M02_BERDAT), GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+        GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+        GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+
+        /* 49-2 (FN) */
+        GPIO_FN(HSU_IQ_AGC6), GPIO_FN(MFG2_IN2), GPIO_FN(MSIOF2_MCK0),
+        GPIO_FN(HSU_IQ_AGC5), GPIO_FN(MFG2_IN1), GPIO_FN(MSIOF2_MCK1),
+        GPIO_FN(HSU_IQ_AGC4), GPIO_FN(MSIOF2_RSYNC),
+        GPIO_FN(HSU_IQ_AGC3), GPIO_FN(MFG2_OUT1), GPIO_FN(MSIOF2_RSCK),
+        GPIO_FN(HSU_IQ_AGC2), GPIO_FN(PORT42_KEYOUT0),
+        GPIO_FN(HSU_IQ_AGC1), GPIO_FN(PORT43_KEYOUT1),
+        GPIO_FN(HSU_IQ_AGC0), GPIO_FN(PORT44_KEYOUT2),
+        GPIO_FN(HSU_IQ_AGC_ST), GPIO_FN(PORT45_KEYOUT3),
+        GPIO_FN(HSU_IQ_PDO), GPIO_FN(PORT46_KEYOUT4),
+        GPIO_FN(HSU_IQ_PYO), GPIO_FN(PORT47_KEYOUT5),
+        GPIO_FN(HSU_EN_TXMUX_G3MO), GPIO_FN(PORT48_KEYIN0),
+        GPIO_FN(HSU_I_TXMUX_G3MO), GPIO_FN(PORT49_KEYIN1),
+        GPIO_FN(HSU_Q_TXMUX_G3MO), GPIO_FN(PORT50_KEYIN2),
+        GPIO_FN(HSU_SYO), GPIO_FN(PORT51_MSIOF2_TSYNC),
+        GPIO_FN(HSU_SDO), GPIO_FN(PORT52_MSIOF2_TSCK),
+        GPIO_FN(HSU_TGTTI_G3MO), GPIO_FN(PORT53_MSIOF2_TXD),
+        GPIO_FN(B_TIME_STAMP), GPIO_FN(PORT54_MSIOF2_RXD),
+        GPIO_FN(HSU_SDI), GPIO_FN(PORT55_KEYIN3),
+        GPIO_FN(HSU_SCO), GPIO_FN(PORT56_KEYIN4),
+        GPIO_FN(HSU_DREQ), GPIO_FN(PORT57_KEYIN5),
+        GPIO_FN(HSU_DACK), GPIO_FN(PORT58_KEYIN6),
+        GPIO_FN(HSU_CLK61M), GPIO_FN(PORT59_MSIOF2_SS1),
+        GPIO_FN(HSU_XRST), GPIO_FN(PORT60_MSIOF2_SS2),
+        GPIO_FN(PCMCLKO), GPIO_FN(SYNC8KO), GPIO_FN(DNPCM_A), GPIO_FN(UPPCM_A),
+        GPIO_FN(XTALB1L),
+        GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+        GPIO_FN(GPS_AGC2), GPIO_FN(SCIFA0_SCK),
+        GPIO_FN(GPS_AGC3), GPIO_FN(SCIFA0_TXD),
+        GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+        GPIO_FN(GPS_PWRD), GPIO_FN(SCIFA0_CTS),
+        GPIO_FN(GPS_IM), GPIO_FN(GPS_IS), GPIO_FN(GPS_QM), GPIO_FN(GPS_QS),
+        GPIO_FN(SIUBOMC), GPIO_FN(TPU2TO0),
+        GPIO_FN(SIUCKB), GPIO_FN(TPU2TO1),
+        GPIO_FN(SIUBOLR), GPIO_FN(BBIF2_TSYNC), GPIO_FN(TPU2TO2),
+        GPIO_FN(SIUBOBT), GPIO_FN(BBIF2_TSCK), GPIO_FN(TPU2TO3),
+        GPIO_FN(SIUBOSLD), GPIO_FN(BBIF2_TXD), GPIO_FN(TPU3TO0),
+        GPIO_FN(SIUBILR), GPIO_FN(TPU3TO1),
+        GPIO_FN(SIUBIBT), GPIO_FN(TPU3TO2),
+        GPIO_FN(SIUBISLD), GPIO_FN(TPU3TO3),
+        GPIO_FN(NMI), GPIO_FN(TPU4TO0),
+        GPIO_FN(DNPCM_M), GPIO_FN(TPU4TO1), GPIO_FN(TPU4TO2), GPIO_FN(TPU4TO3),
+        GPIO_FN(IRQ_TMPB),
+        GPIO_FN(PWEN), GPIO_FN(MFG1_OUT1),
+        GPIO_FN(OVCN), GPIO_FN(MFG1_IN1),
+        GPIO_FN(OVCN2), GPIO_FN(MFG1_IN2),
+
+        /* 49-3 (FN) */
+        GPIO_FN(RFSPO1), GPIO_FN(RFSPO2), GPIO_FN(RFSPO3),
+        GPIO_FN(PORT93_VIO_CKO2),
+        GPIO_FN(USBTERM), GPIO_FN(EXTLP), GPIO_FN(IDIN),
+        GPIO_FN(SCIFA5_CTS), GPIO_FN(MFG0_IN1),
+        GPIO_FN(SCIFA5_RTS), GPIO_FN(MFG0_IN2),
+        GPIO_FN(SCIFA5_RXD),
+        GPIO_FN(SCIFA5_TXD),
+        GPIO_FN(SCIFA5_SCK), GPIO_FN(MFG0_OUT1),
+        GPIO_FN(A0_EA0), GPIO_FN(BS),
+        GPIO_FN(A14_EA14), GPIO_FN(PORT102_KEYOUT0),
+        GPIO_FN(A15_EA15), GPIO_FN(PORT103_KEYOUT1), GPIO_FN(DV_CLKOL),
+        GPIO_FN(A16_EA16), GPIO_FN(PORT104_KEYOUT2),
+        GPIO_FN(DV_VSYNCL), GPIO_FN(MSIOF0_SS1),
+        GPIO_FN(A17_EA17), GPIO_FN(PORT105_KEYOUT3),
+        GPIO_FN(DV_HSYNCL), GPIO_FN(MSIOF0_TSYNC),
+        GPIO_FN(A18_EA18), GPIO_FN(PORT106_KEYOUT4),
+        GPIO_FN(DV_DL0), GPIO_FN(MSIOF0_TSCK),
+        GPIO_FN(A19_EA19), GPIO_FN(PORT107_KEYOUT5),
+        GPIO_FN(DV_DL1), GPIO_FN(MSIOF0_TXD),
+        GPIO_FN(A20_EA20), GPIO_FN(PORT108_KEYIN0),
+        GPIO_FN(DV_DL2), GPIO_FN(MSIOF0_RSCK),
+        GPIO_FN(A21_EA21), GPIO_FN(PORT109_KEYIN1),
+        GPIO_FN(DV_DL3), GPIO_FN(MSIOF0_RSYNC),
+        GPIO_FN(A22_EA22), GPIO_FN(PORT110_KEYIN2),
+        GPIO_FN(DV_DL4), GPIO_FN(MSIOF0_MCK0),
+        GPIO_FN(A23_EA23), GPIO_FN(PORT111_KEYIN3),
+        GPIO_FN(DV_DL5), GPIO_FN(MSIOF0_MCK1),
+        GPIO_FN(A24_EA24), GPIO_FN(PORT112_KEYIN4),
+        GPIO_FN(DV_DL6), GPIO_FN(MSIOF0_RXD),
+        GPIO_FN(A25_EA25), GPIO_FN(PORT113_KEYIN5),
+        GPIO_FN(DV_DL7), GPIO_FN(MSIOF0_SS2),
+        GPIO_FN(A26), GPIO_FN(PORT113_KEYIN6), GPIO_FN(DV_CLKIL),
+        GPIO_FN(D0_ED0_NAF0), GPIO_FN(D1_ED1_NAF1), GPIO_FN(D2_ED2_NAF2),
+        GPIO_FN(D3_ED3_NAF3), GPIO_FN(D4_ED4_NAF4), GPIO_FN(D5_ED5_NAF5),
+        GPIO_FN(D6_ED6_NAF6), GPIO_FN(D7_ED7_NAF7), GPIO_FN(D8_ED8_NAF8),
+        GPIO_FN(D9_ED9_NAF9), GPIO_FN(D10_ED10_NAF10), GPIO_FN(D11_ED11_NAF11),
+        GPIO_FN(D12_ED12_NAF12), GPIO_FN(D13_ED13_NAF13),
+        GPIO_FN(D14_ED14_NAF14), GPIO_FN(D15_ED15_NAF15),
+        GPIO_FN(CS4), GPIO_FN(CS5A), GPIO_FN(CS5B), GPIO_FN(FCE1),
+        GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(FCE0), GPIO_FN(CS6A),
+        GPIO_FN(DACK0), GPIO_FN(WAIT), GPIO_FN(DREQ0), GPIO_FN(RD_XRD),
+        GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(WE0_XWR0_FWE),
+        GPIO_FN(WE1_XWR1), GPIO_FN(FRB), GPIO_FN(CKO),
+        GPIO_FN(NBRSTOUT), GPIO_FN(NBRST),
+
+        /* 49-4 (FN) */
+        GPIO_FN(RFSPO0), GPIO_FN(PORT146_VIO_CKO2), GPIO_FN(TSTMD),
+        GPIO_FN(VIO_VD), GPIO_FN(VIO_HD),
+        GPIO_FN(VIO_D0), GPIO_FN(VIO_D1), GPIO_FN(VIO_D2),
+        GPIO_FN(VIO_D3), GPIO_FN(VIO_D4), GPIO_FN(VIO_D5),
+        GPIO_FN(VIO_D6), GPIO_FN(VIO_D7), GPIO_FN(VIO_D8),
+        GPIO_FN(VIO_D9), GPIO_FN(VIO_D10), GPIO_FN(VIO_D11),
+        GPIO_FN(VIO_D12), GPIO_FN(VIO_D13), GPIO_FN(VIO_D14),
+        GPIO_FN(VIO_D15), GPIO_FN(VIO_CLK), GPIO_FN(VIO_FIELD),
+        GPIO_FN(VIO_CKO),
+        GPIO_FN(MFG3_IN1), GPIO_FN(MFG3_IN2),
+        GPIO_FN(M9_SLCD_A01), GPIO_FN(MFG3_OUT1), GPIO_FN(TPU0TO0),
+        GPIO_FN(M10_SLCD_CK1), GPIO_FN(MFG4_IN1), GPIO_FN(TPU0TO1),
+        GPIO_FN(M11_SLCD_SO1), GPIO_FN(MFG4_IN2), GPIO_FN(TPU0TO2),
+        GPIO_FN(M12_SLCD_CE1), GPIO_FN(MFG4_OUT1), GPIO_FN(TPU0TO3),
+        GPIO_FN(LCDD0), GPIO_FN(PORT175_KEYOUT0), GPIO_FN(DV_D0),
+        GPIO_FN(SIUCKA), GPIO_FN(MFG0_OUT2),
+        GPIO_FN(LCDD1), GPIO_FN(PORT176_KEYOUT1), GPIO_FN(DV_D1),
+        GPIO_FN(SIUAOLR), GPIO_FN(BBIF2_TSYNC1),
+        GPIO_FN(LCDD2), GPIO_FN(PORT177_KEYOUT2), GPIO_FN(DV_D2),
+        GPIO_FN(SIUAOBT), GPIO_FN(BBIF2_TSCK1),
+        GPIO_FN(LCDD3), GPIO_FN(PORT178_KEYOUT3), GPIO_FN(DV_D3),
+        GPIO_FN(SIUAOSLD), GPIO_FN(BBIF2_TXD1),
+        GPIO_FN(LCDD4), GPIO_FN(PORT179_KEYOUT4), GPIO_FN(DV_D4),
+        GPIO_FN(SIUAISPD), GPIO_FN(MFG1_OUT2),
+        GPIO_FN(LCDD5), GPIO_FN(PORT180_KEYOUT5), GPIO_FN(DV_D5),
+        GPIO_FN(SIUAILR), GPIO_FN(MFG2_OUT2),
+        GPIO_FN(LCDD6), GPIO_FN(DV_D6),
+        GPIO_FN(SIUAIBT), GPIO_FN(MFG3_OUT2), GPIO_FN(XWR2),
+        GPIO_FN(LCDD7), GPIO_FN(DV_D7),
+        GPIO_FN(SIUAISLD), GPIO_FN(MFG4_OUT2), GPIO_FN(XWR3),
+        GPIO_FN(LCDD8), GPIO_FN(DV_D8), GPIO_FN(D16), GPIO_FN(ED16),
+        GPIO_FN(LCDD9), GPIO_FN(DV_D9), GPIO_FN(D17), GPIO_FN(ED17),
+        GPIO_FN(LCDD10), GPIO_FN(DV_D10), GPIO_FN(D18), GPIO_FN(ED18),
+        GPIO_FN(LCDD11), GPIO_FN(DV_D11), GPIO_FN(D19), GPIO_FN(ED19),
+        GPIO_FN(LCDD12), GPIO_FN(DV_D12), GPIO_FN(D20), GPIO_FN(ED20),
+        GPIO_FN(LCDD13), GPIO_FN(DV_D13), GPIO_FN(D21), GPIO_FN(ED21),
+        GPIO_FN(LCDD14), GPIO_FN(DV_D14), GPIO_FN(D22), GPIO_FN(ED22),
+        GPIO_FN(LCDD15), GPIO_FN(DV_D15), GPIO_FN(D23), GPIO_FN(ED23),
+        GPIO_FN(LCDD16), GPIO_FN(DV_HSYNC), GPIO_FN(D24), GPIO_FN(ED24),
+        GPIO_FN(LCDD17), GPIO_FN(DV_VSYNC), GPIO_FN(D25), GPIO_FN(ED25),
+        GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(MSIOF0L_TSCK),
+        GPIO_FN(D26), GPIO_FN(ED26),
+        GPIO_FN(LCDD19), GPIO_FN(MSIOF0L_TSYNC),
+        GPIO_FN(D27), GPIO_FN(ED27),
+        GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+        GPIO_FN(D28), GPIO_FN(ED28),
+        GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+        GPIO_FN(D29), GPIO_FN(ED29),
+        GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_SS1),
+        GPIO_FN(D30), GPIO_FN(ED30),
+        GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_SS2),
+        GPIO_FN(D31), GPIO_FN(ED31),
+        GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(DV_CKO), GPIO_FN(SIUAOSPD),
+        GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_RSYNC),
+
+        /* 49-5 (FN) */
+        GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+        GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_RSCK),
+        GPIO_FN(LCDCSYN), GPIO_FN(LCDCSYN2), GPIO_FN(DV_CKI),
+        GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(MSIOF0L_RXD),
+        GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(MSIOF0L_TXD),
+        GPIO_FN(VIO_DR0), GPIO_FN(VIO_DR1), GPIO_FN(VIO_DR2), GPIO_FN(VIO_DR3),
+        GPIO_FN(VIO_DR4), GPIO_FN(VIO_DR5), GPIO_FN(VIO_DR6), GPIO_FN(VIO_DR7),
+        GPIO_FN(VIO_VDR), GPIO_FN(VIO_HDR),
+        GPIO_FN(VIO_CLKR), GPIO_FN(VIO_CKOR),
+        GPIO_FN(SCIFA1_TXD), GPIO_FN(GPS_PGFA0),
+        GPIO_FN(SCIFA1_SCK), GPIO_FN(GPS_PGFA1),
+        GPIO_FN(SCIFA1_RTS), GPIO_FN(GPS_EPPSINMON),
+        GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_CTS),
+        GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA1_TXD2), GPIO_FN(GPS_TXD),
+        GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA1_CTS2), GPIO_FN(I2C_SDA2),
+        GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA1_SCK2),
+        GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA1_RXD2), GPIO_FN(GPS_RXD),
+        GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA1_RTS2),
+        GPIO_FN(MSIOF1_RSYNC), GPIO_FN(I2C_SCL2),
+        GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+        GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+        GPIO_FN(MSIOF1_SS2),
+        GPIO_FN(PORT236_IROUT), GPIO_FN(IRDA_OUT),
+        GPIO_FN(IRDA_IN), GPIO_FN(IRDA_FIRSEL),
+        GPIO_FN(TPU1TO0), GPIO_FN(TS_SPSYNC3),
+        GPIO_FN(TPU1TO1), GPIO_FN(TS_SDAT3),
+        GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT241_MSIOF2_SS1),
+        GPIO_FN(TPU1TO3), GPIO_FN(PORT242_MSIOF2_TSCK),
+        GPIO_FN(M13_BSW), GPIO_FN(PORT243_MSIOF2_TSYNC),
+        GPIO_FN(M14_GSW), GPIO_FN(PORT244_MSIOF2_TXD),
+        GPIO_FN(PORT245_IROUT), GPIO_FN(M15_RSW),
+        GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1),
+        GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1),
+        GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT248_MSIOF2_SS2),
+        GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT249_MSIOF2_RXD),
+        GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+        GPIO_FN(SDHICLK0), GPIO_FN(TCK2),
+        GPIO_FN(SDHICD0),
+        GPIO_FN(SDHID0_0), GPIO_FN(TMS2),
+        GPIO_FN(SDHID0_1), GPIO_FN(TDO2),
+        GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+        GPIO_FN(SDHID0_3), GPIO_FN(RTCK2),
+
+        /* 49-6 (FN) */
+        GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+        GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+        GPIO_FN(SDHICLK1), GPIO_FN(TCK3),
+        GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2),
+        GPIO_FN(TS_SPSYNC2), GPIO_FN(TMS3),
+        GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_AO2),
+        GPIO_FN(TS_SDAT2), GPIO_FN(TDO3),
+        GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2),
+        GPIO_FN(TS_SDEN2), GPIO_FN(TDI3),
+        GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2),
+        GPIO_FN(TS_SCK2), GPIO_FN(RTCK3),
+        GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+        GPIO_FN(SDHICLK2), GPIO_FN(SCIFB_SCK),
+        GPIO_FN(SDHID2_0), GPIO_FN(SCIFB_TXD),
+        GPIO_FN(SDHID2_1), GPIO_FN(SCIFB_CTS),
+        GPIO_FN(SDHID2_2), GPIO_FN(SCIFB_RXD),
+        GPIO_FN(SDHID2_3), GPIO_FN(SCIFB_RTS),
+        GPIO_FN(SDHICMD2),
+        GPIO_FN(RESETOUTS),
+        GPIO_FN(DIVLOCK),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)             \
+        0, (out), (in), 0,                      \
+        0, 0, 0, 0,                             \
+        0, 0, (in_pd), 0,                       \
+        0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)                                         \
+        { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {           \
+                PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,           \
+                     PORT##nr##_IN_PU, PORT##nr##_OUT),         \
+                PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
+                PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
+                PORT##nr##_FN6, PORT##nr##_FN7 }                \
+        }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+        PORTCR(0, 0xe6050000), /* PORT0CR */
+        PORTCR(1, 0xe6050001), /* PORT1CR */
+        PORTCR(2, 0xe6050002), /* PORT2CR */
+        PORTCR(3, 0xe6050003), /* PORT3CR */
+        PORTCR(4, 0xe6050004), /* PORT4CR */
+        PORTCR(5, 0xe6050005), /* PORT5CR */
+        PORTCR(6, 0xe6050006), /* PORT6CR */
+        PORTCR(7, 0xe6050007), /* PORT7CR */
+        PORTCR(8, 0xe6050008), /* PORT8CR */
+        PORTCR(9, 0xe6050009), /* PORT9CR */
+
+        PORTCR(10, 0xe605000a), /* PORT10CR */
+        PORTCR(11, 0xe605000b), /* PORT11CR */
+        PORTCR(12, 0xe605000c), /* PORT12CR */
+        PORTCR(13, 0xe605000d), /* PORT13CR */
+        PORTCR(14, 0xe605000e), /* PORT14CR */
+        PORTCR(15, 0xe605000f), /* PORT15CR */
+        PORTCR(16, 0xe6050010), /* PORT16CR */
+        PORTCR(17, 0xe6050011), /* PORT17CR */
+        PORTCR(18, 0xe6050012), /* PORT18CR */
+        PORTCR(19, 0xe6050013), /* PORT19CR */
+
+        PORTCR(20, 0xe6050014), /* PORT20CR */
+        PORTCR(21, 0xe6050015), /* PORT21CR */
+        PORTCR(22, 0xe6050016), /* PORT22CR */
+        PORTCR(23, 0xe6050017), /* PORT23CR */
+        PORTCR(24, 0xe6050018), /* PORT24CR */
+        PORTCR(25, 0xe6050019), /* PORT25CR */
+        PORTCR(26, 0xe605001a), /* PORT26CR */
+        PORTCR(27, 0xe605001b), /* PORT27CR */
+        PORTCR(28, 0xe605001c), /* PORT28CR */
+        PORTCR(29, 0xe605001d), /* PORT29CR */
+
+        PORTCR(30, 0xe605001e), /* PORT30CR */
+        PORTCR(31, 0xe605001f), /* PORT31CR */
+        PORTCR(32, 0xe6050020), /* PORT32CR */
+        PORTCR(33, 0xe6050021), /* PORT33CR */
+        PORTCR(34, 0xe6050022), /* PORT34CR */
+        PORTCR(35, 0xe6050023), /* PORT35CR */
+        PORTCR(36, 0xe6050024), /* PORT36CR */
+        PORTCR(37, 0xe6050025), /* PORT37CR */
+        PORTCR(38, 0xe6050026), /* PORT38CR */
+        PORTCR(39, 0xe6050027), /* PORT39CR */
+
+        PORTCR(40, 0xe6050028), /* PORT40CR */
+        PORTCR(41, 0xe6050029), /* PORT41CR */
+        PORTCR(42, 0xe605002a), /* PORT42CR */
+        PORTCR(43, 0xe605002b), /* PORT43CR */
+        PORTCR(44, 0xe605002c), /* PORT44CR */
+        PORTCR(45, 0xe605002d), /* PORT45CR */
+        PORTCR(46, 0xe605002e), /* PORT46CR */
+        PORTCR(47, 0xe605002f), /* PORT47CR */
+        PORTCR(48, 0xe6050030), /* PORT48CR */
+        PORTCR(49, 0xe6050031), /* PORT49CR */
+
+        PORTCR(50, 0xe6050032), /* PORT50CR */
+        PORTCR(51, 0xe6050033), /* PORT51CR */
+        PORTCR(52, 0xe6050034), /* PORT52CR */
+        PORTCR(53, 0xe6050035), /* PORT53CR */
+        PORTCR(54, 0xe6050036), /* PORT54CR */
+        PORTCR(55, 0xe6050037), /* PORT55CR */
+        PORTCR(56, 0xe6050038), /* PORT56CR */
+        PORTCR(57, 0xe6050039), /* PORT57CR */
+        PORTCR(58, 0xe605003a), /* PORT58CR */
+        PORTCR(59, 0xe605003b), /* PORT59CR */
+
+        PORTCR(60, 0xe605003c), /* PORT60CR */
+        PORTCR(61, 0xe605003d), /* PORT61CR */
+        PORTCR(62, 0xe605003e), /* PORT62CR */
+        PORTCR(63, 0xe605003f), /* PORT63CR */
+        PORTCR(64, 0xe6050040), /* PORT64CR */
+        PORTCR(65, 0xe6050041), /* PORT65CR */
+        PORTCR(66, 0xe6050042), /* PORT66CR */
+        PORTCR(67, 0xe6050043), /* PORT67CR */
+        PORTCR(68, 0xe6050044), /* PORT68CR */
+        PORTCR(69, 0xe6050045), /* PORT69CR */
+
+        PORTCR(70, 0xe6050046), /* PORT70CR */
+        PORTCR(71, 0xe6050047), /* PORT71CR */
+        PORTCR(72, 0xe6050048), /* PORT72CR */
+        PORTCR(73, 0xe6050049), /* PORT73CR */
+        PORTCR(74, 0xe605004a), /* PORT74CR */
+        PORTCR(75, 0xe605004b), /* PORT75CR */
+        PORTCR(76, 0xe605004c), /* PORT76CR */
+        PORTCR(77, 0xe605004d), /* PORT77CR */
+        PORTCR(78, 0xe605004e), /* PORT78CR */
+        PORTCR(79, 0xe605004f), /* PORT79CR */
+
+        PORTCR(80, 0xe6050050), /* PORT80CR */
+        PORTCR(81, 0xe6050051), /* PORT81CR */
+        PORTCR(82, 0xe6050052), /* PORT82CR */
+        PORTCR(83, 0xe6050053), /* PORT83CR */
+        PORTCR(84, 0xe6050054), /* PORT84CR */
+        PORTCR(85, 0xe6050055), /* PORT85CR */
+        PORTCR(86, 0xe6050056), /* PORT86CR */
+        PORTCR(87, 0xe6050057), /* PORT87CR */
+        PORTCR(88, 0xe6051058), /* PORT88CR */
+        PORTCR(89, 0xe6051059), /* PORT89CR */
+
+        PORTCR(90, 0xe605105a), /* PORT90CR */
+        PORTCR(91, 0xe605105b), /* PORT91CR */
+        PORTCR(92, 0xe605105c), /* PORT92CR */
+        PORTCR(93, 0xe605105d), /* PORT93CR */
+        PORTCR(94, 0xe605105e), /* PORT94CR */
+        PORTCR(95, 0xe605105f), /* PORT95CR */
+        PORTCR(96, 0xe6051060), /* PORT96CR */
+        PORTCR(97, 0xe6051061), /* PORT97CR */
+        PORTCR(98, 0xe6051062), /* PORT98CR */
+        PORTCR(99, 0xe6051063), /* PORT99CR */
+
+        PORTCR(100, 0xe6051064), /* PORT100CR */
+        PORTCR(101, 0xe6051065), /* PORT101CR */
+        PORTCR(102, 0xe6051066), /* PORT102CR */
+        PORTCR(103, 0xe6051067), /* PORT103CR */
+        PORTCR(104, 0xe6051068), /* PORT104CR */
+        PORTCR(105, 0xe6051069), /* PORT105CR */
+        PORTCR(106, 0xe605106a), /* PORT106CR */
+        PORTCR(107, 0xe605106b), /* PORT107CR */
+        PORTCR(108, 0xe605106c), /* PORT108CR */
+        PORTCR(109, 0xe605106d), /* PORT109CR */
+
+        PORTCR(110, 0xe605106e), /* PORT110CR */
+        PORTCR(111, 0xe605106f), /* PORT111CR */
+        PORTCR(112, 0xe6051070), /* PORT112CR */
+        PORTCR(113, 0xe6051071), /* PORT113CR */
+        PORTCR(114, 0xe6051072), /* PORT114CR */
+        PORTCR(115, 0xe6051073), /* PORT115CR */
+        PORTCR(116, 0xe6051074), /* PORT116CR */
+        PORTCR(117, 0xe6051075), /* PORT117CR */
+        PORTCR(118, 0xe6051076), /* PORT118CR */
+        PORTCR(119, 0xe6051077), /* PORT119CR */
+
+        PORTCR(120, 0xe6051078), /* PORT120CR */
+        PORTCR(121, 0xe6051079), /* PORT121CR */
+        PORTCR(122, 0xe605107a), /* PORT122CR */
+        PORTCR(123, 0xe605107b), /* PORT123CR */
+        PORTCR(124, 0xe605107c), /* PORT124CR */
+        PORTCR(125, 0xe605107d), /* PORT125CR */
+        PORTCR(126, 0xe605107e), /* PORT126CR */
+        PORTCR(127, 0xe605107f), /* PORT127CR */
+        PORTCR(128, 0xe6051080), /* PORT128CR */
+        PORTCR(129, 0xe6051081), /* PORT129CR */
+
+        PORTCR(130, 0xe6051082), /* PORT130CR */
+        PORTCR(131, 0xe6051083), /* PORT131CR */
+        PORTCR(132, 0xe6051084), /* PORT132CR */
+        PORTCR(133, 0xe6051085), /* PORT133CR */
+        PORTCR(134, 0xe6051086), /* PORT134CR */
+        PORTCR(135, 0xe6051087), /* PORT135CR */
+        PORTCR(136, 0xe6051088), /* PORT136CR */
+        PORTCR(137, 0xe6051089), /* PORT137CR */
+        PORTCR(138, 0xe605108a), /* PORT138CR */
+        PORTCR(139, 0xe605108b), /* PORT139CR */
+
+        PORTCR(140, 0xe605108c), /* PORT140CR */
+        PORTCR(141, 0xe605108d), /* PORT141CR */
+        PORTCR(142, 0xe605108e), /* PORT142CR */
+        PORTCR(143, 0xe605108f), /* PORT143CR */
+        PORTCR(144, 0xe6051090), /* PORT144CR */
+        PORTCR(145, 0xe6051091), /* PORT145CR */
+        PORTCR(146, 0xe6051092), /* PORT146CR */
+        PORTCR(147, 0xe6051093), /* PORT147CR */
+        PORTCR(148, 0xe6051094), /* PORT148CR */
+        PORTCR(149, 0xe6051095), /* PORT149CR */
+
+        PORTCR(150, 0xe6051096), /* PORT150CR */
+        PORTCR(151, 0xe6051097), /* PORT151CR */
+        PORTCR(152, 0xe6051098), /* PORT152CR */
+        PORTCR(153, 0xe6051099), /* PORT153CR */
+        PORTCR(154, 0xe605109a), /* PORT154CR */
+        PORTCR(155, 0xe605109b), /* PORT155CR */
+        PORTCR(156, 0xe605109c), /* PORT156CR */
+        PORTCR(157, 0xe605109d), /* PORT157CR */
+        PORTCR(158, 0xe605109e), /* PORT158CR */
+        PORTCR(159, 0xe605109f), /* PORT159CR */
+
+        PORTCR(160, 0xe60510a0), /* PORT160CR */
+        PORTCR(161, 0xe60510a1), /* PORT161CR */
+        PORTCR(162, 0xe60510a2), /* PORT162CR */
+        PORTCR(163, 0xe60510a3), /* PORT163CR */
+        PORTCR(164, 0xe60510a4), /* PORT164CR */
+        PORTCR(165, 0xe60510a5), /* PORT165CR */
+        PORTCR(166, 0xe60510a6), /* PORT166CR */
+        PORTCR(167, 0xe60510a7), /* PORT167CR */
+        PORTCR(168, 0xe60510a8), /* PORT168CR */
+        PORTCR(169, 0xe60510a9), /* PORT169CR */
+
+        PORTCR(170, 0xe60510aa), /* PORT170CR */
+        PORTCR(171, 0xe60510ab), /* PORT171CR */
+        PORTCR(172, 0xe60510ac), /* PORT172CR */
+        PORTCR(173, 0xe60510ad), /* PORT173CR */
+        PORTCR(174, 0xe60510ae), /* PORT174CR */
+        PORTCR(175, 0xe60520af), /* PORT175CR */
+        PORTCR(176, 0xe60520b0), /* PORT176CR */
+        PORTCR(177, 0xe60520b1), /* PORT177CR */
+        PORTCR(178, 0xe60520b2), /* PORT178CR */
+        PORTCR(179, 0xe60520b3), /* PORT179CR */
+
+        PORTCR(180, 0xe60520b4), /* PORT180CR */
+        PORTCR(181, 0xe60520b5), /* PORT181CR */
+        PORTCR(182, 0xe60520b6), /* PORT182CR */
+        PORTCR(183, 0xe60520b7), /* PORT183CR */
+        PORTCR(184, 0xe60520b8), /* PORT184CR */
+        PORTCR(185, 0xe60520b9), /* PORT185CR */
+        PORTCR(186, 0xe60520ba), /* PORT186CR */
+        PORTCR(187, 0xe60520bb), /* PORT187CR */
+        PORTCR(188, 0xe60520bc), /* PORT188CR */
+        PORTCR(189, 0xe60520bd), /* PORT189CR */
+
+        PORTCR(190, 0xe60520be), /* PORT190CR */
+        PORTCR(191, 0xe60520bf), /* PORT191CR */
+        PORTCR(192, 0xe60520c0), /* PORT192CR */
+        PORTCR(193, 0xe60520c1), /* PORT193CR */
+        PORTCR(194, 0xe60520c2), /* PORT194CR */
+        PORTCR(195, 0xe60520c3), /* PORT195CR */
+        PORTCR(196, 0xe60520c4), /* PORT196CR */
+        PORTCR(197, 0xe60520c5), /* PORT197CR */
+        PORTCR(198, 0xe60520c6), /* PORT198CR */
+        PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+        PORTCR(200, 0xe60520c8), /* PORT200CR */
+        PORTCR(201, 0xe60520c9), /* PORT201CR */
+        PORTCR(202, 0xe60520ca), /* PORT202CR */
+        PORTCR(203, 0xe60520cb), /* PORT203CR */
+        PORTCR(204, 0xe60520cc), /* PORT204CR */
+        PORTCR(205, 0xe60520cd), /* PORT205CR */
+        PORTCR(206, 0xe60520ce), /* PORT206CR */
+        PORTCR(207, 0xe60520cf), /* PORT207CR */
+        PORTCR(208, 0xe60520d0), /* PORT208CR */
+        PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+        PORTCR(210, 0xe60520d2), /* PORT210CR */
+        PORTCR(211, 0xe60520d3), /* PORT211CR */
+        PORTCR(212, 0xe60520d4), /* PORT212CR */
+        PORTCR(213, 0xe60520d5), /* PORT213CR */
+        PORTCR(214, 0xe60520d6), /* PORT214CR */
+        PORTCR(215, 0xe60520d7), /* PORT215CR */
+        PORTCR(216, 0xe60520d8), /* PORT216CR */
+        PORTCR(217, 0xe60520d9), /* PORT217CR */
+        PORTCR(218, 0xe60520da), /* PORT218CR */
+        PORTCR(219, 0xe60520db), /* PORT219CR */
+
+        PORTCR(220, 0xe60520dc), /* PORT220CR */
+        PORTCR(221, 0xe60520dd), /* PORT221CR */
+        PORTCR(222, 0xe60520de), /* PORT222CR */
+        PORTCR(223, 0xe60520df), /* PORT223CR */
+        PORTCR(224, 0xe60520e0), /* PORT224CR */
+        PORTCR(225, 0xe60520e1), /* PORT225CR */
+        PORTCR(226, 0xe60520e2), /* PORT226CR */
+        PORTCR(227, 0xe60520e3), /* PORT227CR */
+        PORTCR(228, 0xe60520e4), /* PORT228CR */
+        PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+        PORTCR(230, 0xe60520e6), /* PORT230CR */
+        PORTCR(231, 0xe60520e7), /* PORT231CR */
+        PORTCR(232, 0xe60520e8), /* PORT232CR */
+        PORTCR(233, 0xe60520e9), /* PORT233CR */
+        PORTCR(234, 0xe60520ea), /* PORT234CR */
+        PORTCR(235, 0xe60520eb), /* PORT235CR */
+        PORTCR(236, 0xe60530ec), /* PORT236CR */
+        PORTCR(237, 0xe60530ed), /* PORT237CR */
+        PORTCR(238, 0xe60530ee), /* PORT238CR */
+        PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+        PORTCR(240, 0xe60530f0), /* PORT240CR */
+        PORTCR(241, 0xe60530f1), /* PORT241CR */
+        PORTCR(242, 0xe60530f2), /* PORT242CR */
+        PORTCR(243, 0xe60530f3), /* PORT243CR */
+        PORTCR(244, 0xe60530f4), /* PORT244CR */
+        PORTCR(245, 0xe60530f5), /* PORT245CR */
+        PORTCR(246, 0xe60530f6), /* PORT246CR */
+        PORTCR(247, 0xe60530f7), /* PORT247CR */
+        PORTCR(248, 0xe60530f8), /* PORT248CR */
+        PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+        PORTCR(250, 0xe60530fa), /* PORT250CR */
+        PORTCR(251, 0xe60530fb), /* PORT251CR */
+        PORTCR(252, 0xe60530fc), /* PORT252CR */
+        PORTCR(253, 0xe60530fd), /* PORT253CR */
+        PORTCR(254, 0xe60530fe), /* PORT254CR */
+        PORTCR(255, 0xe60530ff), /* PORT255CR */
+        PORTCR(256, 0xe6053100), /* PORT256CR */
+        PORTCR(257, 0xe6053101), /* PORT257CR */
+        PORTCR(258, 0xe6053102), /* PORT258CR */
+        PORTCR(259, 0xe6053103), /* PORT259CR */
+
+        PORTCR(260, 0xe6053104), /* PORT260CR */
+        PORTCR(261, 0xe6053105), /* PORT261CR */
+        PORTCR(262, 0xe6053106), /* PORT262CR */
+        PORTCR(263, 0xe6053107), /* PORT263CR */
+        PORTCR(264, 0xe6053108), /* PORT264CR */
+        PORTCR(265, 0xe6053109), /* PORT265CR */
+        PORTCR(266, 0xe605310a), /* PORT266CR */
+        PORTCR(267, 0xe605310b), /* PORT267CR */
+        PORTCR(268, 0xe605310c), /* PORT268CR */
+        PORTCR(269, 0xe605310d), /* PORT269CR */
+
+        PORTCR(270, 0xe605310e), /* PORT270CR */
+        PORTCR(271, 0xe605310f), /* PORT271CR */
+        PORTCR(272, 0xe6053110), /* PORT272CR */
+
+        { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                0, 0,
+                0, 0,
+                0, 0,
+                0, 0,
+                0, 0,
+                MSELBCR_MSEL2_0, MSELBCR_MSEL2_1,
+                0, 0,
+                0, 0 }
+        },
+        { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+        { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+                PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+                PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+                PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+                PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+                PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+                PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+                PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+                PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+        },
+        { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+                PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+                PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+                PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+                PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+                PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+                PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+                PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+                PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+        },
+        { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+                PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+                PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+                PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+                PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+                PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+                PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+                PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+                PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+        },
+        { PINMUX_DATA_REG("PORTD127_096DR", 0xe6055004, 32) {
+                PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+                PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+                PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+                PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+                PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+                PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+                PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+                PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+        },
+        { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055008, 32) {
+                PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+                PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+                PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+                PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+                PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+                PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+                PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+                PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+        },
+        { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056000, 32) {
+                PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+                PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+                PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+                PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+                PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+                PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+                PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+                PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+        },
+        { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056004, 32) {
+                PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+                PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+                PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+                PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+                PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+                PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+                PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+                PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+        },
+        { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+                PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+                PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+                PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+                PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+                PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+                PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+                PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+                PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+        },
+        { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+                0, 0, 0, 0,
+                0, 0, 0, 0,
+                0, 0, 0, 0,
+                0, 0, 0, PORT272_DATA,
+                PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+                PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+                PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+                PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+        },
+        { },
+};
+
+static struct pinmux_info sh7367_pinmux_info = {
+        .name = "sh7367_pfc",
+        .reserved_id = PINMUX_RESERVED,
+        .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+        .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+        .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+        .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+        .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+        .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+        .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+        .first_gpio = GPIO_PORT0,
+        .last_gpio = GPIO_FN_DIVLOCK,
+
+        .gpios = pinmux_gpios,
+        .cfg_regs = pinmux_config_regs,
+        .data_regs = pinmux_data_regs,
+
+        .gpio_data = pinmux_data,
+        .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7367_pinmux_init(void)
+{
+        register_pinmux(&sh7367_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
new file mode 100644
index 00000000000..9557d0964d7
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -0,0 +1,1637 @@
+/*
+ * sh7372 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on
+ * sh7367 processor support - PFC hardware block
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7372.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)                               \
+        _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),       \
+        _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),       \
+        _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),       \
+        _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),       \
+        _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _80(fn, pfx, sfx)                               \
+        _10(fn, pfx##1, sfx),   _10(fn, pfx##2, sfx),   \
+        _10(fn, pfx##3, sfx),   _10(fn, pfx##4, sfx),   \
+        _10(fn, pfx##5, sfx),   _10(fn, pfx##6, sfx),   \
+        _10(fn, pfx##7, sfx),   _10(fn, pfx##8, sfx)
+
+#define _190(fn, pfx, sfx) \
+        _10(fn, pfx, sfx), _80(fn, pfx, sfx), _10(fn, pfx##9, sfx), \
+        _10(fn, pfx##10, sfx), _80(fn, pfx##1, sfx), _1(fn, pfx##190, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_ALL(str) _190(_PORT, PORT, str)
+
+enum {
+        PINMUX_RESERVED = 0,
+
+        /* PORT0_DATA -> PORT190_DATA */
+        PINMUX_DATA_BEGIN,
+        PORT_ALL(DATA),
+        PINMUX_DATA_END,
+
+        /* PORT0_IN -> PORT190_IN */
+        PINMUX_INPUT_BEGIN,
+        PORT_ALL(IN),
+        PINMUX_INPUT_END,
+
+        /* PORT0_IN_PU -> PORT190_IN_PU */
+        PINMUX_INPUT_PULLUP_BEGIN,
+        PORT_ALL(IN_PU),
+        PINMUX_INPUT_PULLUP_END,
+
+        /* PORT0_IN_PD -> PORT190_IN_PD */
+        PINMUX_INPUT_PULLDOWN_BEGIN,
+        PORT_ALL(IN_PD),
+        PINMUX_INPUT_PULLDOWN_END,
+
+        /* PORT0_OUT -> PORT190_OUT */
+        PINMUX_OUTPUT_BEGIN,
+        PORT_ALL(OUT),
+        PINMUX_OUTPUT_END,
+
+        PINMUX_FUNCTION_BEGIN,
+        PORT_ALL(FN_IN),        /* PORT0_FN_IN  -> PORT190_FN_IN */
+        PORT_ALL(FN_OUT),       /* PORT0_FN_OUT -> PORT190_FN_OUT */
+        PORT_ALL(FN0),          /* PORT0_FN0    -> PORT190_FN0 */
+        PORT_ALL(FN1),          /* PORT0_FN1    -> PORT190_FN1 */
+        PORT_ALL(FN2),          /* PORT0_FN2    -> PORT190_FN2 */
+        PORT_ALL(FN3),          /* PORT0_FN3    -> PORT190_FN3 */
+        PORT_ALL(FN4),          /* PORT0_FN4    -> PORT190_FN4 */
+        PORT_ALL(FN5),          /* PORT0_FN5    -> PORT190_FN5 */
+        PORT_ALL(FN6),          /* PORT0_FN6    -> PORT190_FN6 */
+        PORT_ALL(FN7),          /* PORT0_FN7    -> PORT190_FN7 */
+
+        MSEL1CR_31_0,   MSEL1CR_31_1,
+        MSEL1CR_30_0,   MSEL1CR_30_1,
+        MSEL1CR_29_0,   MSEL1CR_29_1,
+        MSEL1CR_28_0,   MSEL1CR_28_1,
+        MSEL1CR_27_0,   MSEL1CR_27_1,
+        MSEL1CR_26_0,   MSEL1CR_26_1,
+        MSEL1CR_16_0,   MSEL1CR_16_1,
+        MSEL1CR_15_0,   MSEL1CR_15_1,
+        MSEL1CR_14_0,   MSEL1CR_14_1,
+        MSEL1CR_13_0,   MSEL1CR_13_1,
+        MSEL1CR_12_0,   MSEL1CR_12_1,
+        MSEL1CR_9_0,    MSEL1CR_9_1,
+        MSEL1CR_8_0,    MSEL1CR_8_1,
+        MSEL1CR_7_0,    MSEL1CR_7_1,
+        MSEL1CR_6_0,    MSEL1CR_6_1,
+        MSEL1CR_4_0,    MSEL1CR_4_1,
+        MSEL1CR_3_0,    MSEL1CR_3_1,
+        MSEL1CR_2_0,    MSEL1CR_2_1,
+        MSEL1CR_0_0,    MSEL1CR_0_1,
+
+        MSEL3CR_27_0,   MSEL3CR_27_1,
+        MSEL3CR_26_0,   MSEL3CR_26_1,
+        MSEL3CR_21_0,   MSEL3CR_21_1,
+        MSEL3CR_20_0,   MSEL3CR_20_1,
+        MSEL3CR_15_0,   MSEL3CR_15_1,
+        MSEL3CR_9_0,    MSEL3CR_9_1,
+        MSEL3CR_6_0,    MSEL3CR_6_1,
+
+        MSEL4CR_19_0,   MSEL4CR_19_1,
+        MSEL4CR_18_0,   MSEL4CR_18_1,
+        MSEL4CR_17_0,   MSEL4CR_17_1,
+        MSEL4CR_16_0,   MSEL4CR_16_1,
+        MSEL4CR_15_0,   MSEL4CR_15_1,
+        MSEL4CR_14_0,   MSEL4CR_14_1,
+        MSEL4CR_10_0,   MSEL4CR_10_1,
+        MSEL4CR_6_0,    MSEL4CR_6_1,
+        MSEL4CR_4_0,    MSEL4CR_4_1,
+        MSEL4CR_1_0,    MSEL4CR_1_1,
+        PINMUX_FUNCTION_END,
+
+        PINMUX_MARK_BEGIN,
+
+        /* IRQ */
+        IRQ0_6_MARK,    IRQ0_162_MARK,  IRQ1_MARK,      IRQ2_4_MARK,
+        IRQ2_5_MARK,    IRQ3_8_MARK,    IRQ3_16_MARK,   IRQ4_17_MARK,
+        IRQ4_163_MARK,  IRQ5_MARK,      IRQ6_39_MARK,   IRQ6_164_MARK,
+        IRQ7_40_MARK,   IRQ7_167_MARK,  IRQ8_41_MARK,   IRQ8_168_MARK,
+        IRQ9_42_MARK,   IRQ9_169_MARK,  IRQ10_MARK,     IRQ11_MARK,
+        IRQ12_80_MARK,  IRQ12_137_MARK, IRQ13_81_MARK,  IRQ13_145_MARK,
+        IRQ14_82_MARK,  IRQ14_146_MARK, IRQ15_83_MARK,  IRQ15_147_MARK,
+        IRQ16_84_MARK,  IRQ16_170_MARK, IRQ17_MARK,     IRQ18_MARK,
+        IRQ19_MARK,     IRQ20_MARK,     IRQ21_MARK,     IRQ22_MARK,
+        IRQ23_MARK,     IRQ24_MARK,     IRQ25_MARK,     IRQ26_121_MARK,
+        IRQ26_172_MARK, IRQ27_122_MARK, IRQ27_180_MARK, IRQ28_123_MARK,
+        IRQ28_181_MARK, IRQ29_129_MARK, IRQ29_182_MARK, IRQ30_130_MARK,
+        IRQ30_183_MARK, IRQ31_138_MARK, IRQ31_184_MARK,
+
+        /* MSIOF0 */
+        MSIOF0_TSYNC_MARK,      MSIOF0_TSCK_MARK,       MSIOF0_RXD_MARK,
+        MSIOF0_RSCK_MARK,       MSIOF0_RSYNC_MARK,      MSIOF0_MCK0_MARK,
+        MSIOF0_MCK1_MARK,       MSIOF0_SS1_MARK,        MSIOF0_SS2_MARK,
+        MSIOF0_TXD_MARK,
+
+        /* MSIOF1 */
+        MSIOF1_TSCK_39_MARK,    MSIOF1_TSYNC_40_MARK,
+        MSIOF1_TSCK_88_MARK,    MSIOF1_TSYNC_89_MARK,
+        MSIOF1_TXD_41_MARK,     MSIOF1_RXD_42_MARK,
+        MSIOF1_TXD_90_MARK,     MSIOF1_RXD_91_MARK,
+        MSIOF1_SS1_43_MARK,     MSIOF1_SS2_44_MARK,
+        MSIOF1_SS1_92_MARK,     MSIOF1_SS2_93_MARK,
+        MSIOF1_RSCK_MARK,       MSIOF1_RSYNC_MARK,
+        MSIOF1_MCK0_MARK,       MSIOF1_MCK1_MARK,
+
+        /* MSIOF2 */
+        MSIOF2_RSCK_MARK,       MSIOF2_RSYNC_MARK,      MSIOF2_MCK0_MARK,
+        MSIOF2_MCK1_MARK,       MSIOF2_SS1_MARK,        MSIOF2_SS2_MARK,
+        MSIOF2_TSYNC_MARK,      MSIOF2_TSCK_MARK,       MSIOF2_RXD_MARK,
+        MSIOF2_TXD_MARK,
+
+        /* MSIOF3 */
+        BBIF1_RXD_MARK,         BBIF1_TSYNC_MARK,       BBIF1_TSCK_MARK,
+        BBIF1_TXD_MARK,         BBIF1_RSCK_MARK,        BBIF1_RSYNC_MARK,
+        BBIF1_FLOW_MARK,        BB_RX_FLOW_N_MARK,
+
+        /* MSIOF4 */
+        BBIF2_TSCK1_MARK,       BBIF2_TSYNC1_MARK,
+        BBIF2_TXD1_MARK,        BBIF2_RXD_MARK,
+
+        /* FSI */
+        FSIACK_MARK,    FSIBCK_MARK,            FSIAILR_MARK,   FSIAIBT_MARK,
+        FSIAISLD_MARK,  FSIAOMC_MARK,           FSIAOLR_MARK,   FSIAOBT_MARK,
+        FSIAOSLD_MARK,  FSIASPDIF_11_MARK,      FSIASPDIF_15_MARK,
+
+        /* FMSI */
+        FMSOCK_MARK,    FMSOOLR_MARK,   FMSIOLR_MARK,   FMSOOBT_MARK,
+        FMSIOBT_MARK,   FMSOSLD_MARK,   FMSOILR_MARK,   FMSIILR_MARK,
+        FMSOIBT_MARK,   FMSIIBT_MARK,   FMSISLD_MARK,   FMSICK_MARK,
+
+        /* SCIFA0 */
+        SCIFA0_TXD_MARK,        SCIFA0_RXD_MARK,        SCIFA0_SCK_MARK,
+        SCIFA0_RTS_MARK,        SCIFA0_CTS_MARK,
+
+        /* SCIFA1 */
+        SCIFA1_TXD_MARK,        SCIFA1_RXD_MARK,        SCIFA1_SCK_MARK,
+        SCIFA1_RTS_MARK,        SCIFA1_CTS_MARK,
+
+        /* SCIFA2 */
+        SCIFA2_CTS1_MARK,       SCIFA2_RTS1_MARK,       SCIFA2_TXD1_MARK,
+        SCIFA2_RXD1_MARK,       SCIFA2_SCK1_MARK,
+
+        /* SCIFA3 */
+        SCIFA3_CTS_43_MARK,     SCIFA3_CTS_140_MARK,    SCIFA3_RTS_44_MARK,
+        SCIFA3_RTS_141_MARK,    SCIFA3_SCK_MARK,        SCIFA3_TXD_MARK,
+        SCIFA3_RXD_MARK,
+
+        /* SCIFA4 */
+        SCIFA4_RXD_MARK,        SCIFA4_TXD_MARK,
+
+        /* SCIFA5 */
+        SCIFA5_RXD_MARK,        SCIFA5_TXD_MARK,
+
+        /* SCIFB */
+        SCIFB_SCK_MARK, SCIFB_RTS_MARK, SCIFB_CTS_MARK,
+        SCIFB_TXD_MARK, SCIFB_RXD_MARK,
+
+        /* CEU */
+        VIO_HD_MARK,    VIO_CKO1_MARK,  VIO_CKO2_MARK,  VIO_VD_MARK,
+        VIO_CLK_MARK,   VIO_FIELD_MARK, VIO_CKO_MARK,
+        VIO_D0_MARK,    VIO_D1_MARK,    VIO_D2_MARK,    VIO_D3_MARK,
+        VIO_D4_MARK,    VIO_D5_MARK,    VIO_D6_MARK,    VIO_D7_MARK,
+        VIO_D8_MARK,    VIO_D9_MARK,    VIO_D10_MARK,   VIO_D11_MARK,
+        VIO_D12_MARK,   VIO_D13_MARK,   VIO_D14_MARK,   VIO_D15_MARK,
+
+        /* USB0 */
+        IDIN_0_MARK,    EXTLP_0_MARK,   OVCN2_0_MARK,   PWEN_0_MARK,
+        OVCN_0_MARK,    VBUS0_0_MARK,
+
+        /* USB1 */
+        IDIN_1_18_MARK,         IDIN_1_113_MARK,
+        PWEN_1_115_MARK,        PWEN_1_138_MARK,
+        OVCN_1_114_MARK,        OVCN_1_162_MARK,
+        EXTLP_1_MARK,           OVCN2_1_MARK,
+        VBUS0_1_MARK,
+
+        /* GPIO */
+        GPI0_MARK,      GPI1_MARK,      GPO0_MARK,      GPO1_MARK,
+
+        /* BSC */
+        BS_MARK,        WE1_MARK,
+        CKO_MARK,       WAIT_MARK,      RDWR_MARK,
+
+        A0_MARK,        A1_MARK,        A2_MARK,        A3_MARK,
+        A6_MARK,        A7_MARK,        A8_MARK,        A9_MARK,
+        A10_MARK,       A11_MARK,       A12_MARK,       A13_MARK,
+        A14_MARK,       A15_MARK,       A16_MARK,       A17_MARK,
+        A18_MARK,       A19_MARK,       A20_MARK,       A21_MARK,
+        A22_MARK,       A23_MARK,       A24_MARK,       A25_MARK,
+        A26_MARK,
+
+        CS0_MARK,       CS2_MARK,       CS4_MARK,
+        CS5A_MARK,      CS5B_MARK,      CS6A_MARK,
+
+        /* BSC/FLCTL */
+        RD_FSC_MARK,    WE0_FWE_MARK,   A4_FOE_MARK,    A5_FCDE_MARK,
+        D0_NAF0_MARK,   D1_NAF1_MARK,   D2_NAF2_MARK,   D3_NAF3_MARK,
+        D4_NAF4_MARK,   D5_NAF5_MARK,   D6_NAF6_MARK,   D7_NAF7_MARK,
+        D8_NAF8_MARK,   D9_NAF9_MARK,   D10_NAF10_MARK, D11_NAF11_MARK,
+        D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, D15_NAF15_MARK,
+
+        /* MMCIF(1) */
+        MMCD0_0_MARK,   MMCD0_1_MARK,   MMCD0_2_MARK,   MMCD0_3_MARK,
+        MMCD0_4_MARK,   MMCD0_5_MARK,   MMCD0_6_MARK,   MMCD0_7_MARK,
+        MMCCMD0_MARK,   MMCCLK0_MARK,
+
+        /* MMCIF(2) */
+        MMCD1_0_MARK,   MMCD1_1_MARK,   MMCD1_2_MARK,   MMCD1_3_MARK,
+        MMCD1_4_MARK,   MMCD1_5_MARK,   MMCD1_6_MARK,   MMCD1_7_MARK,
+        MMCCLK1_MARK,   MMCCMD1_MARK,
+
+        /* SPU2 */
+        VINT_I_MARK,
+
+        /* FLCTL */
+        FCE1_MARK,      FCE0_MARK,      FRB_MARK,
+
+        /* HSI */
+        GP_RX_FLAG_MARK,        GP_RX_DATA_MARK,        GP_TX_READY_MARK,
+        GP_RX_WAKE_MARK,        MP_TX_FLAG_MARK,        MP_TX_DATA_MARK,
+        MP_RX_READY_MARK,       MP_TX_WAKE_MARK,
+
+        /* MFI */
+        MFIv6_MARK,
+        MFIv4_MARK,
+
+        MEMC_CS0_MARK,                  MEMC_BUSCLK_MEMC_A0_MARK,
+        MEMC_CS1_MEMC_A1_MARK,          MEMC_ADV_MEMC_DREQ0_MARK,
+        MEMC_WAIT_MEMC_DREQ1_MARK,      MEMC_NOE_MARK,
+        MEMC_NWE_MARK,                  MEMC_INT_MARK,
+
+        MEMC_AD0_MARK,  MEMC_AD1_MARK,  MEMC_AD2_MARK,
+        MEMC_AD3_MARK,  MEMC_AD4_MARK,  MEMC_AD5_MARK,
+        MEMC_AD6_MARK,  MEMC_AD7_MARK,  MEMC_AD8_MARK,
+        MEMC_AD9_MARK,  MEMC_AD10_MARK, MEMC_AD11_MARK,
+        MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK,
+        MEMC_AD15_MARK,
+
+        /* SIM */
+        SIM_RST_MARK,   SIM_CLK_MARK,   SIM_D_MARK,
+
+        /* TPU */
+        TPU0TO0_MARK,           TPU0TO1_MARK,
+        TPU0TO2_93_MARK,        TPU0TO2_99_MARK,
+        TPU0TO3_MARK,
+
+        /* I2C2 */
+        I2C_SCL2_MARK,  I2C_SDA2_MARK,
+
+        /* I2C3(1) */
+        I2C_SCL3_MARK,  I2C_SDA3_MARK,
+
+        /* I2C3(2) */
+        I2C_SCL3S_MARK, I2C_SDA3S_MARK,
+
+        /* I2C4(2) */
+        I2C_SCL4_MARK,  I2C_SDA4_MARK,
+
+        /* I2C4(2) */
+        I2C_SCL4S_MARK, I2C_SDA4S_MARK,
+
+        /* KEYSC */
+        KEYOUT0_MARK,   KEYIN0_121_MARK,        KEYIN0_136_MARK,
+        KEYOUT1_MARK,   KEYIN1_122_MARK,        KEYIN1_135_MARK,
+        KEYOUT2_MARK,   KEYIN2_123_MARK,        KEYIN2_134_MARK,
+        KEYOUT3_MARK,   KEYIN3_124_MARK,        KEYIN3_133_MARK,
+        KEYOUT4_MARK,   KEYIN4_MARK,
+        KEYOUT5_MARK,   KEYIN5_MARK,
+        KEYOUT6_MARK,   KEYIN6_MARK,
+        KEYOUT7_MARK,   KEYIN7_MARK,
+
+        /* LCDC */
+        LCDC0_SELECT_MARK,
+        LCDC1_SELECT_MARK,
+        LCDHSYN_MARK,   LCDCS_MARK,     LCDVSYN_MARK,   LCDDCK_MARK,
+        LCDWR_MARK,     LCDRD_MARK,     LCDDISP_MARK,   LCDRS_MARK,
+        LCDLCLK_MARK,   LCDDON_MARK,
+
+        LCDD0_MARK,     LCDD1_MARK,     LCDD2_MARK,     LCDD3_MARK,
+        LCDD4_MARK,     LCDD5_MARK,     LCDD6_MARK,     LCDD7_MARK,
+        LCDD8_MARK,     LCDD9_MARK,     LCDD10_MARK,    LCDD11_MARK,
+        LCDD12_MARK,    LCDD13_MARK,    LCDD14_MARK,    LCDD15_MARK,
+        LCDD16_MARK,    LCDD17_MARK,    LCDD18_MARK,    LCDD19_MARK,
+        LCDD20_MARK,    LCDD21_MARK,    LCDD22_MARK,    LCDD23_MARK,
+
+        /* IRDA */
+        IRDA_OUT_MARK,  IRDA_IN_MARK,   IRDA_FIRSEL_MARK,
+        IROUT_139_MARK, IROUT_140_MARK,
+
+        /* TSIF1 */
+        TS0_1SELECT_MARK,
+        TS0_2SELECT_MARK,
+        TS1_1SELECT_MARK,
+        TS1_2SELECT_MARK,
+
+        TS_SPSYNC1_MARK,        TS_SDAT1_MARK,
+        TS_SDEN1_MARK,          TS_SCK1_MARK,
+
+        /* TSIF2 */
+        TS_SPSYNC2_MARK,        TS_SDAT2_MARK,
+        TS_SDEN2_MARK,          TS_SCK2_MARK,
+
+        /* HDMI */
+        HDMI_HPD_MARK,  HDMI_CEC_MARK,
+
+        /* SDHI0 */
+        SDHICLK0_MARK,  SDHICD0_MARK,
+        SDHICMD0_MARK,  SDHIWP0_MARK,
+        SDHID0_0_MARK,  SDHID0_1_MARK,
+        SDHID0_2_MARK,  SDHID0_3_MARK,
+
+        /* SDHI1 */
+        SDHICLK1_MARK,  SDHICMD1_MARK,  SDHID1_0_MARK,
+        SDHID1_1_MARK,  SDHID1_2_MARK,  SDHID1_3_MARK,
+
+        /* SDHI2 */
+        SDHICLK2_MARK,  SDHICMD2_MARK,  SDHID2_0_MARK,
+        SDHID2_1_MARK,  SDHID2_2_MARK,  SDHID2_3_MARK,
+
+        /* SDENC */
+        SDENC_CPG_MARK,
+        SDENC_DV_CLKI_MARK,
+
+        PINMUX_MARK_END,
+};
+
+/* PORT_DATA_I_PD(nr) */
+#define _I___D(nr)                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_I_PU(nr) */
+#define _I__U_(nr)                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_I_PU_PD(nr) */
+#define _I__UD(nr)                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+/* PORT_DATA_O(nr) */
+#define __O___(nr)                                                      \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT)
+
+/* PORT_DATA_IO(nr) */
+#define _IO___(nr)                                   \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN)
+
+/* PORT_DATA_IO_PD(nr) */
+#define _IO__D(nr)                                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD)
+
+/* PORT_DATA_IO_PU(nr) */
+#define _IO_U_(nr)                                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PU)
+
+/* PORT_DATA_IO_PU_PD(nr) */
+#define _IO_UD(nr)                                           \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_OUT, \
+                    PORT##nr##_IN, PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+
+static pinmux_enum_t pinmux_data[] = {
+
+        /* specify valid pin states for each pin in GPIO mode */
+
+        _IO__D(0), _IO__D(1), __O___(2), _I___D(3), _I___D(4),
+        _I___D(5), _IO_UD(6), _I___D(7), _IO__D(8), __O___(9),
+
+        __O___(10), __O___(11), _IO_UD(12), _IO__D(13), _IO__D(14),
+        __O___(15), _IO__D(16), _IO__D(17), _I___D(18), _IO___(19),
+
+        _IO___(20), _IO___(21), _IO___(22), _IO___(23), _IO___(24),
+        _IO___(25), _IO___(26), _IO___(27), _IO___(28), _IO___(29),
+
+        _IO___(30), _IO___(31), _IO___(32), _IO___(33), _IO___(34),
+        _IO___(35), _IO___(36), _IO___(37), _IO___(38), _IO___(39),
+
+        _IO___(40), _IO___(41), _IO___(42), _IO___(43), _IO___(44),
+        _IO___(45), _IO_U_(46), _IO_U_(47), _IO_U_(48), _IO_U_(49),
+
+        _IO_U_(50), _IO_U_(51), _IO_U_(52), _IO_U_(53), _IO_U_(54),
+        _IO_U_(55), _IO_U_(56), _IO_U_(57), _IO_U_(58), _IO_U_(59),
+
+        _IO_U_(60), _IO_U_(61), _IO___(62), __O___(63), __O___(64),
+        _IO_U_(65), __O___(66), _IO_U_(67), __O___(68), _IO___(69), /*66?*/
+
+        _IO___(70), _IO___(71), __O___(72), _I__U_(73), _I__UD(74),
+        _IO_UD(75), _IO_UD(76), _IO_UD(77), _IO_UD(78), _IO_UD(79),
+
+        _IO_UD(80), _IO_UD(81), _IO_UD(82), _IO_UD(83), _IO_UD(84),
+        _IO_UD(85), _IO_UD(86), _IO_UD(87), _IO_UD(88), _IO_UD(89),
+
+        _IO_UD(90), _IO_UD(91), _IO_UD(92), _IO_UD(93), _IO_UD(94),
+        _IO_UD(95), _IO_U_(96), _IO_UD(97), _IO_UD(98), __O___(99), /*99?*/
+
+        _IO__D(100), _IO__D(101), _IO__D(102), _IO__D(103), _IO__D(104),
+        _IO__D(105), _IO_U_(106), _IO_U_(107), _IO_U_(108), _IO_U_(109),
+
+        _IO_U_(110), _IO_U_(111), _IO__D(112), _IO__D(113), _IO_U_(114),
+        _IO_U_(115), _IO_U_(116), _IO_U_(117), _IO_U_(118), _IO_U_(119),
+
+        _IO_U_(120), _IO__D(121), _IO__D(122), _IO__D(123), _IO__D(124),
+        _IO__D(125), _IO__D(126), _IO__D(127), _IO__D(128), _IO_UD(129),
+
+        _IO_UD(130), _IO_UD(131), _IO_UD(132), _IO_UD(133), _IO_UD(134),
+        _IO_UD(135), _IO__D(136), _IO__D(137), _IO__D(138), _IO__D(139),
+
+        _IO__D(140), _IO__D(141), _IO__D(142), _IO_UD(143), _IO__D(144),
+        _IO__D(145), _IO__D(146), _IO__D(147), _IO__D(148), _IO__D(149),
+
+        _IO__D(150), _IO__D(151), _IO_UD(152), _I___D(153), _IO_UD(154),
+        _I___D(155), _IO__D(156), _IO__D(157), _I___D(158), _IO__D(159),
+
+        __O___(160), _IO__D(161), _IO__D(162), _IO__D(163), _I___D(164),
+        _IO__D(165), _I___D(166), _I___D(167), _I___D(168), _I___D(169),
+
+        _I___D(170), __O___(171), _IO_UD(172), _IO_UD(173), _IO_UD(174),
+        _IO_UD(175), _IO_UD(176), _IO_UD(177), _IO_UD(178), __O___(179),
+
+        _IO_UD(180), _IO_UD(181), _IO_UD(182), _IO_UD(183), _IO_UD(184),
+        __O___(185), _IO_UD(186), _IO_UD(187), _IO_UD(188), _IO_UD(189),
+
+        _IO_UD(190),
+
+        /* IRQ */
+        PINMUX_DATA(IRQ0_6_MARK,        PORT6_FN0,      MSEL1CR_0_0),
+        PINMUX_DATA(IRQ0_162_MARK,      PORT162_FN0,    MSEL1CR_0_1),
+        PINMUX_DATA(IRQ1_MARK,          PORT12_FN0),
+        PINMUX_DATA(IRQ2_4_MARK,        PORT4_FN0,      MSEL1CR_2_0),
+        PINMUX_DATA(IRQ2_5_MARK,        PORT5_FN0,      MSEL1CR_2_1),
+        PINMUX_DATA(IRQ3_8_MARK,        PORT8_FN0,      MSEL1CR_3_0),
+        PINMUX_DATA(IRQ3_16_MARK,       PORT16_FN0,     MSEL1CR_3_1),
+        PINMUX_DATA(IRQ4_17_MARK,       PORT17_FN0,     MSEL1CR_4_0),
+        PINMUX_DATA(IRQ4_163_MARK,      PORT163_FN0,    MSEL1CR_4_1),
+        PINMUX_DATA(IRQ5_MARK,          PORT18_FN0),
+        PINMUX_DATA(IRQ6_39_MARK,       PORT39_FN0,     MSEL1CR_6_0),
+        PINMUX_DATA(IRQ6_164_MARK,      PORT164_FN0,    MSEL1CR_6_1),
+        PINMUX_DATA(IRQ7_40_MARK,       PORT40_FN0,     MSEL1CR_7_1),
+        PINMUX_DATA(IRQ7_167_MARK,      PORT167_FN0,    MSEL1CR_7_0),
+        PINMUX_DATA(IRQ8_41_MARK,       PORT41_FN0,     MSEL1CR_8_1),
+        PINMUX_DATA(IRQ8_168_MARK,      PORT168_FN0,    MSEL1CR_8_0),
+        PINMUX_DATA(IRQ9_42_MARK,       PORT42_FN0,     MSEL1CR_9_0),
+        PINMUX_DATA(IRQ9_169_MARK,      PORT169_FN0,    MSEL1CR_9_1),
+        PINMUX_DATA(IRQ10_MARK,         PORT65_FN0,     MSEL1CR_9_1),
+        PINMUX_DATA(IRQ11_MARK,         PORT67_FN0),
+        PINMUX_DATA(IRQ12_80_MARK,      PORT80_FN0,     MSEL1CR_12_0),
+        PINMUX_DATA(IRQ12_137_MARK,     PORT137_FN0,    MSEL1CR_12_1),
+        PINMUX_DATA(IRQ13_81_MARK,      PORT81_FN0,     MSEL1CR_13_0),
+        PINMUX_DATA(IRQ13_145_MARK,     PORT145_FN0,    MSEL1CR_13_1),
+        PINMUX_DATA(IRQ14_82_MARK,      PORT82_FN0,     MSEL1CR_14_0),
+        PINMUX_DATA(IRQ14_146_MARK,     PORT146_FN0,    MSEL1CR_14_1),
+        PINMUX_DATA(IRQ15_83_MARK,      PORT83_FN0,     MSEL1CR_15_0),
+        PINMUX_DATA(IRQ15_147_MARK,     PORT147_FN0,    MSEL1CR_15_1),
+        PINMUX_DATA(IRQ16_84_MARK,      PORT84_FN0,     MSEL1CR_16_0),
+        PINMUX_DATA(IRQ16_170_MARK,     PORT170_FN0,    MSEL1CR_16_1),
+        PINMUX_DATA(IRQ17_MARK,         PORT85_FN0),
+        PINMUX_DATA(IRQ18_MARK,         PORT86_FN0),
+        PINMUX_DATA(IRQ19_MARK,         PORT87_FN0),
+        PINMUX_DATA(IRQ20_MARK,         PORT92_FN0),
+        PINMUX_DATA(IRQ21_MARK,         PORT93_FN0),
+        PINMUX_DATA(IRQ22_MARK,         PORT94_FN0),
+        PINMUX_DATA(IRQ23_MARK,         PORT95_FN0),
+        PINMUX_DATA(IRQ24_MARK,         PORT112_FN0),
+        PINMUX_DATA(IRQ25_MARK,         PORT119_FN0),
+        PINMUX_DATA(IRQ26_121_MARK,     PORT121_FN0,    MSEL1CR_26_1),
+        PINMUX_DATA(IRQ26_172_MARK,     PORT172_FN0,    MSEL1CR_26_0),
+        PINMUX_DATA(IRQ27_122_MARK,     PORT122_FN0,    MSEL1CR_27_1),
+        PINMUX_DATA(IRQ27_180_MARK,     PORT180_FN0,    MSEL1CR_27_0),
+        PINMUX_DATA(IRQ28_123_MARK,     PORT123_FN0,    MSEL1CR_28_1),
+        PINMUX_DATA(IRQ28_181_MARK,     PORT181_FN0,    MSEL1CR_28_0),
+        PINMUX_DATA(IRQ29_129_MARK,     PORT129_FN0,    MSEL1CR_29_1),
+        PINMUX_DATA(IRQ29_182_MARK,     PORT182_FN0,    MSEL1CR_29_0),
+        PINMUX_DATA(IRQ30_130_MARK,     PORT130_FN0,    MSEL1CR_30_1),
+        PINMUX_DATA(IRQ30_183_MARK,     PORT183_FN0,    MSEL1CR_30_0),
+        PINMUX_DATA(IRQ31_138_MARK,     PORT138_FN0,    MSEL1CR_31_1),
+        PINMUX_DATA(IRQ31_184_MARK,     PORT184_FN0,    MSEL1CR_31_0),
+
+        /* Function 1 */
+        PINMUX_DATA(BBIF2_TSCK1_MARK,           PORT0_FN1),
+        PINMUX_DATA(BBIF2_TSYNC1_MARK,          PORT1_FN1),
+        PINMUX_DATA(BBIF2_TXD1_MARK,            PORT2_FN1),
+        PINMUX_DATA(BBIF2_RXD_MARK,             PORT3_FN1),
+        PINMUX_DATA(FSIACK_MARK,                PORT4_FN1),
+        PINMUX_DATA(FSIAILR_MARK,               PORT5_FN1),
+        PINMUX_DATA(FSIAIBT_MARK,               PORT6_FN1),
+        PINMUX_DATA(FSIAISLD_MARK,              PORT7_FN1),
+        PINMUX_DATA(FSIAOMC_MARK,               PORT8_FN1),
+        PINMUX_DATA(FSIAOLR_MARK,               PORT9_FN1),
+        PINMUX_DATA(FSIAOBT_MARK,               PORT10_FN1),
+        PINMUX_DATA(FSIAOSLD_MARK,              PORT11_FN1),
+        PINMUX_DATA(FMSOCK_MARK,                PORT12_FN1),
+        PINMUX_DATA(FMSOOLR_MARK,               PORT13_FN1),
+        PINMUX_DATA(FMSOOBT_MARK,               PORT14_FN1),
+        PINMUX_DATA(FMSOSLD_MARK,               PORT15_FN1),
+        PINMUX_DATA(FMSOILR_MARK,               PORT16_FN1),
+        PINMUX_DATA(FMSOIBT_MARK,               PORT17_FN1),
+        PINMUX_DATA(FMSISLD_MARK,               PORT18_FN1),
+        PINMUX_DATA(A0_MARK,                    PORT19_FN1),
+        PINMUX_DATA(A1_MARK,                    PORT20_FN1),
+        PINMUX_DATA(A2_MARK,                    PORT21_FN1),
+        PINMUX_DATA(A3_MARK,                    PORT22_FN1),
+        PINMUX_DATA(A4_FOE_MARK,                PORT23_FN1),
+        PINMUX_DATA(A5_FCDE_MARK,               PORT24_FN1),
+        PINMUX_DATA(A6_MARK,                    PORT25_FN1),
+        PINMUX_DATA(A7_MARK,                    PORT26_FN1),
+        PINMUX_DATA(A8_MARK,                    PORT27_FN1),
+        PINMUX_DATA(A9_MARK,                    PORT28_FN1),
+        PINMUX_DATA(A10_MARK,                   PORT29_FN1),
+        PINMUX_DATA(A11_MARK,                   PORT30_FN1),
+        PINMUX_DATA(A12_MARK,                   PORT31_FN1),
+        PINMUX_DATA(A13_MARK,                   PORT32_FN1),
+        PINMUX_DATA(A14_MARK,                   PORT33_FN1),
+        PINMUX_DATA(A15_MARK,                   PORT34_FN1),
+        PINMUX_DATA(A16_MARK,                   PORT35_FN1),
+        PINMUX_DATA(A17_MARK,                   PORT36_FN1),
+        PINMUX_DATA(A18_MARK,                   PORT37_FN1),
+        PINMUX_DATA(A19_MARK,                   PORT38_FN1),
+        PINMUX_DATA(A20_MARK,                   PORT39_FN1),
+        PINMUX_DATA(A21_MARK,                   PORT40_FN1),
+        PINMUX_DATA(A22_MARK,                   PORT41_FN1),
+        PINMUX_DATA(A23_MARK,                   PORT42_FN1),
+        PINMUX_DATA(A24_MARK,                   PORT43_FN1),
+        PINMUX_DATA(A25_MARK,                   PORT44_FN1),
+        PINMUX_DATA(A26_MARK,                   PORT45_FN1),
+        PINMUX_DATA(D0_NAF0_MARK,               PORT46_FN1),
+        PINMUX_DATA(D1_NAF1_MARK,               PORT47_FN1),
+        PINMUX_DATA(D2_NAF2_MARK,               PORT48_FN1),
+        PINMUX_DATA(D3_NAF3_MARK,               PORT49_FN1),
+        PINMUX_DATA(D4_NAF4_MARK,               PORT50_FN1),
+        PINMUX_DATA(D5_NAF5_MARK,               PORT51_FN1),
+        PINMUX_DATA(D6_NAF6_MARK,               PORT52_FN1),
+        PINMUX_DATA(D7_NAF7_MARK,               PORT53_FN1),
+        PINMUX_DATA(D8_NAF8_MARK,               PORT54_FN1),
+        PINMUX_DATA(D9_NAF9_MARK,               PORT55_FN1),
+        PINMUX_DATA(D10_NAF10_MARK,             PORT56_FN1),
+        PINMUX_DATA(D11_NAF11_MARK,             PORT57_FN1),
+        PINMUX_DATA(D12_NAF12_MARK,             PORT58_FN1),
+        PINMUX_DATA(D13_NAF13_MARK,             PORT59_FN1),
+        PINMUX_DATA(D14_NAF14_MARK,             PORT60_FN1),
+        PINMUX_DATA(D15_NAF15_MARK,             PORT61_FN1),
+        PINMUX_DATA(CS0_MARK,                   PORT62_FN1),
+        PINMUX_DATA(CS2_MARK,                   PORT63_FN1),
+        PINMUX_DATA(CS4_MARK,                   PORT64_FN1),
+        PINMUX_DATA(CS5A_MARK,                  PORT65_FN1),
+        PINMUX_DATA(CS5B_MARK,                  PORT66_FN1),
+        PINMUX_DATA(CS6A_MARK,                  PORT67_FN1),
+        PINMUX_DATA(FCE0_MARK,                  PORT68_FN1),
+        PINMUX_DATA(RD_FSC_MARK,                PORT69_FN1),
+        PINMUX_DATA(WE0_FWE_MARK,               PORT70_FN1),
+        PINMUX_DATA(WE1_MARK,                   PORT71_FN1),
+        PINMUX_DATA(CKO_MARK,                   PORT72_FN1),
+        PINMUX_DATA(FRB_MARK,                   PORT73_FN1),
+        PINMUX_DATA(WAIT_MARK,                  PORT74_FN1),
+        PINMUX_DATA(RDWR_MARK,                  PORT75_FN1),
+        PINMUX_DATA(MEMC_AD0_MARK,              PORT76_FN1),
+        PINMUX_DATA(MEMC_AD1_MARK,              PORT77_FN1),
+        PINMUX_DATA(MEMC_AD2_MARK,              PORT78_FN1),
+        PINMUX_DATA(MEMC_AD3_MARK,              PORT79_FN1),
+        PINMUX_DATA(MEMC_AD4_MARK,              PORT80_FN1),
+        PINMUX_DATA(MEMC_AD5_MARK,              PORT81_FN1),
+        PINMUX_DATA(MEMC_AD6_MARK,              PORT82_FN1),
+        PINMUX_DATA(MEMC_AD7_MARK,              PORT83_FN1),
+        PINMUX_DATA(MEMC_AD8_MARK,              PORT84_FN1),
+        PINMUX_DATA(MEMC_AD9_MARK,              PORT85_FN1),
+        PINMUX_DATA(MEMC_AD10_MARK,             PORT86_FN1),
+        PINMUX_DATA(MEMC_AD11_MARK,             PORT87_FN1),
+        PINMUX_DATA(MEMC_AD12_MARK,             PORT88_FN1),
+        PINMUX_DATA(MEMC_AD13_MARK,             PORT89_FN1),
+        PINMUX_DATA(MEMC_AD14_MARK,             PORT90_FN1),
+        PINMUX_DATA(MEMC_AD15_MARK,             PORT91_FN1),
+        PINMUX_DATA(MEMC_CS0_MARK,              PORT92_FN1),
+        PINMUX_DATA(MEMC_BUSCLK_MEMC_A0_MARK,   PORT93_FN1),
+        PINMUX_DATA(MEMC_CS1_MEMC_A1_MARK,      PORT94_FN1),
+        PINMUX_DATA(MEMC_ADV_MEMC_DREQ0_MARK,   PORT95_FN1),
+        PINMUX_DATA(MEMC_WAIT_MEMC_DREQ1_MARK,  PORT96_FN1),
+        PINMUX_DATA(MEMC_NOE_MARK,              PORT97_FN1),
+        PINMUX_DATA(MEMC_NWE_MARK,              PORT98_FN1),
+        PINMUX_DATA(MEMC_INT_MARK,              PORT99_FN1),
+        PINMUX_DATA(VIO_VD_MARK,                PORT100_FN1),
+        PINMUX_DATA(VIO_HD_MARK,                PORT101_FN1),
+        PINMUX_DATA(VIO_D0_MARK,                PORT102_FN1),
+        PINMUX_DATA(VIO_D1_MARK,                PORT103_FN1),
+        PINMUX_DATA(VIO_D2_MARK,                PORT104_FN1),
+        PINMUX_DATA(VIO_D3_MARK,                PORT105_FN1),
+        PINMUX_DATA(VIO_D4_MARK,                PORT106_FN1),
+        PINMUX_DATA(VIO_D5_MARK,                PORT107_FN1),
+        PINMUX_DATA(VIO_D6_MARK,                PORT108_FN1),
+        PINMUX_DATA(VIO_D7_MARK,                PORT109_FN1),
+        PINMUX_DATA(VIO_D8_MARK,                PORT110_FN1),
+        PINMUX_DATA(VIO_D9_MARK,                PORT111_FN1),
+        PINMUX_DATA(VIO_D10_MARK,               PORT112_FN1),
+        PINMUX_DATA(VIO_D11_MARK,               PORT113_FN1),
+        PINMUX_DATA(VIO_D12_MARK,               PORT114_FN1),
+        PINMUX_DATA(VIO_D13_MARK,               PORT115_FN1),
+        PINMUX_DATA(VIO_D14_MARK,               PORT116_FN1),
+        PINMUX_DATA(VIO_D15_MARK,               PORT117_FN1),
+        PINMUX_DATA(VIO_CLK_MARK,               PORT118_FN1),
+        PINMUX_DATA(VIO_FIELD_MARK,             PORT119_FN1),
+        PINMUX_DATA(VIO_CKO_MARK,               PORT120_FN1),
+        PINMUX_DATA(LCDD0_MARK,                 PORT121_FN1),
+        PINMUX_DATA(LCDD1_MARK,                 PORT122_FN1),
+        PINMUX_DATA(LCDD2_MARK,                 PORT123_FN1),
+        PINMUX_DATA(LCDD3_MARK,                 PORT124_FN1),
+        PINMUX_DATA(LCDD4_MARK,                 PORT125_FN1),
+        PINMUX_DATA(LCDD5_MARK,                 PORT126_FN1),
+        PINMUX_DATA(LCDD6_MARK,                 PORT127_FN1),
+        PINMUX_DATA(LCDD7_MARK,                 PORT128_FN1),
+        PINMUX_DATA(LCDD8_MARK,                 PORT129_FN1),
+        PINMUX_DATA(LCDD9_MARK,                 PORT130_FN1),
+        PINMUX_DATA(LCDD10_MARK,                PORT131_FN1),
+        PINMUX_DATA(LCDD11_MARK,                PORT132_FN1),
+        PINMUX_DATA(LCDD12_MARK,                PORT133_FN1),
+        PINMUX_DATA(LCDD13_MARK,                PORT134_FN1),
+        PINMUX_DATA(LCDD14_MARK,                PORT135_FN1),
+        PINMUX_DATA(LCDD15_MARK,                PORT136_FN1),
+        PINMUX_DATA(LCDD16_MARK,                PORT137_FN1),
+        PINMUX_DATA(LCDD17_MARK,                PORT138_FN1),
+        PINMUX_DATA(LCDD18_MARK,                PORT139_FN1),
+        PINMUX_DATA(LCDD19_MARK,                PORT140_FN1),
+        PINMUX_DATA(LCDD20_MARK,                PORT141_FN1),
+        PINMUX_DATA(LCDD21_MARK,                PORT142_FN1),
+        PINMUX_DATA(LCDD22_MARK,                PORT143_FN1),
+        PINMUX_DATA(LCDD23_MARK,                PORT144_FN1),
+        PINMUX_DATA(LCDHSYN_MARK,               PORT145_FN1),
+        PINMUX_DATA(LCDVSYN_MARK,               PORT146_FN1),
+        PINMUX_DATA(LCDDCK_MARK,                PORT147_FN1),
+        PINMUX_DATA(LCDRD_MARK,                 PORT148_FN1),
+        PINMUX_DATA(LCDDISP_MARK,               PORT149_FN1),
+        PINMUX_DATA(LCDLCLK_MARK,               PORT150_FN1),
+        PINMUX_DATA(LCDDON_MARK,                PORT151_FN1),
+        PINMUX_DATA(SCIFA0_TXD_MARK,            PORT152_FN1),
+        PINMUX_DATA(SCIFA0_RXD_MARK,            PORT153_FN1),
+        PINMUX_DATA(SCIFA1_TXD_MARK,            PORT154_FN1),
+        PINMUX_DATA(SCIFA1_RXD_MARK,            PORT155_FN1),
+        PINMUX_DATA(TS_SPSYNC1_MARK,            PORT156_FN1),
+        PINMUX_DATA(TS_SDAT1_MARK,              PORT157_FN1),
+        PINMUX_DATA(TS_SDEN1_MARK,              PORT158_FN1),
+        PINMUX_DATA(TS_SCK1_MARK,               PORT159_FN1),
+        PINMUX_DATA(TPU0TO0_MARK,               PORT160_FN1),
+        PINMUX_DATA(TPU0TO1_MARK,               PORT161_FN1),
+        PINMUX_DATA(SCIFB_SCK_MARK,             PORT162_FN1),
+        PINMUX_DATA(SCIFB_RTS_MARK,             PORT163_FN1),
+        PINMUX_DATA(SCIFB_CTS_MARK,             PORT164_FN1),
+        PINMUX_DATA(SCIFB_TXD_MARK,             PORT165_FN1),
+        PINMUX_DATA(SCIFB_RXD_MARK,             PORT166_FN1),
+        PINMUX_DATA(VBUS0_0_MARK,               PORT167_FN1),
+        PINMUX_DATA(VBUS0_1_MARK,               PORT168_FN1),
+        PINMUX_DATA(HDMI_HPD_MARK,              PORT169_FN1),
+        PINMUX_DATA(HDMI_CEC_MARK,              PORT170_FN1),
+        PINMUX_DATA(SDHICLK0_MARK,              PORT171_FN1),
+        PINMUX_DATA(SDHICD0_MARK,               PORT172_FN1),
+        PINMUX_DATA(SDHID0_0_MARK,              PORT173_FN1),
+        PINMUX_DATA(SDHID0_1_MARK,              PORT174_FN1),
+        PINMUX_DATA(SDHID0_2_MARK,              PORT175_FN1),
+        PINMUX_DATA(SDHID0_3_MARK,              PORT176_FN1),
+        PINMUX_DATA(SDHICMD0_MARK,              PORT177_FN1),
+        PINMUX_DATA(SDHIWP0_MARK,               PORT178_FN1),
+        PINMUX_DATA(SDHICLK1_MARK,              PORT179_FN1),
+        PINMUX_DATA(SDHID1_0_MARK,              PORT180_FN1),
+        PINMUX_DATA(SDHID1_1_MARK,              PORT181_FN1),
+        PINMUX_DATA(SDHID1_2_MARK,              PORT182_FN1),
+        PINMUX_DATA(SDHID1_3_MARK,              PORT183_FN1),
+        PINMUX_DATA(SDHICMD1_MARK,              PORT184_FN1),
+        PINMUX_DATA(SDHICLK2_MARK,              PORT185_FN1),
+        PINMUX_DATA(SDHID2_0_MARK,              PORT186_FN1),
+        PINMUX_DATA(SDHID2_1_MARK,              PORT187_FN1),
+        PINMUX_DATA(SDHID2_2_MARK,              PORT188_FN1),
+        PINMUX_DATA(SDHID2_3_MARK,              PORT189_FN1),
+        PINMUX_DATA(SDHICMD2_MARK,              PORT190_FN1),
+
+        /* Function 2 */
+        PINMUX_DATA(FSIBCK_MARK,                PORT4_FN2),
+        PINMUX_DATA(SCIFA4_RXD_MARK,            PORT5_FN2),
+        PINMUX_DATA(SCIFA4_TXD_MARK,            PORT6_FN2),
+        PINMUX_DATA(SCIFA5_RXD_MARK,            PORT8_FN2),
+        PINMUX_DATA(FSIASPDIF_11_MARK,          PORT11_FN2),
+        PINMUX_DATA(SCIFA5_TXD_MARK,            PORT12_FN2),
+        PINMUX_DATA(FMSIOLR_MARK,               PORT13_FN2),
+        PINMUX_DATA(FMSIOBT_MARK,               PORT14_FN2),
+        PINMUX_DATA(FSIASPDIF_15_MARK,          PORT15_FN2),
+        PINMUX_DATA(FMSIILR_MARK,               PORT16_FN2),
+        PINMUX_DATA(FMSIIBT_MARK,               PORT17_FN2),
+        PINMUX_DATA(BS_MARK,                    PORT19_FN2),
+        PINMUX_DATA(MSIOF0_TSYNC_MARK,          PORT36_FN2),
+        PINMUX_DATA(MSIOF0_TSCK_MARK,           PORT37_FN2),
+        PINMUX_DATA(MSIOF0_RXD_MARK,            PORT38_FN2),
+        PINMUX_DATA(MSIOF0_RSCK_MARK,           PORT39_FN2),
+        PINMUX_DATA(MSIOF0_RSYNC_MARK,          PORT40_FN2),
+        PINMUX_DATA(MSIOF0_MCK0_MARK,           PORT41_FN2),
+        PINMUX_DATA(MSIOF0_MCK1_MARK,           PORT42_FN2),
+        PINMUX_DATA(MSIOF0_SS1_MARK,            PORT43_FN2),
+        PINMUX_DATA(MSIOF0_SS2_MARK,            PORT44_FN2),
+        PINMUX_DATA(MSIOF0_TXD_MARK,            PORT45_FN2),
+        PINMUX_DATA(FMSICK_MARK,                PORT65_FN2),
+        PINMUX_DATA(FCE1_MARK,                  PORT66_FN2),
+        PINMUX_DATA(BBIF1_RXD_MARK,             PORT76_FN2),
+        PINMUX_DATA(BBIF1_TSYNC_MARK,           PORT77_FN2),
+        PINMUX_DATA(BBIF1_TSCK_MARK,            PORT78_FN2),
+        PINMUX_DATA(BBIF1_TXD_MARK,             PORT79_FN2),
+        PINMUX_DATA(BBIF1_RSCK_MARK,            PORT80_FN2),
+        PINMUX_DATA(BBIF1_RSYNC_MARK,           PORT81_FN2),
+        PINMUX_DATA(BBIF1_FLOW_MARK,            PORT82_FN2),
+        PINMUX_DATA(BB_RX_FLOW_N_MARK,          PORT83_FN2),
+        PINMUX_DATA(MSIOF1_RSCK_MARK,           PORT84_FN2),
+        PINMUX_DATA(MSIOF1_RSYNC_MARK,          PORT85_FN2),
+        PINMUX_DATA(MSIOF1_MCK0_MARK,           PORT86_FN2),
+        PINMUX_DATA(MSIOF1_MCK1_MARK,           PORT87_FN2),
+        PINMUX_DATA(MSIOF1_TSCK_88_MARK,        PORT88_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(MSIOF1_TSYNC_89_MARK,       PORT89_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(MSIOF1_TXD_90_MARK,         PORT90_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(MSIOF1_RXD_91_MARK,         PORT91_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(MSIOF1_SS1_92_MARK,         PORT92_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(MSIOF1_SS2_93_MARK,         PORT93_FN2, MSEL4CR_10_1),
+        PINMUX_DATA(SCIFA2_CTS1_MARK,           PORT94_FN2),
+        PINMUX_DATA(SCIFA2_RTS1_MARK,           PORT95_FN2),
+        PINMUX_DATA(SCIFA2_TXD1_MARK,           PORT96_FN2),
+        PINMUX_DATA(SCIFA2_RXD1_MARK,           PORT97_FN2),
+        PINMUX_DATA(SCIFA2_SCK1_MARK,           PORT98_FN2),
+        PINMUX_DATA(I2C_SCL2_MARK,              PORT110_FN2),
+        PINMUX_DATA(I2C_SDA2_MARK,              PORT111_FN2),
+        PINMUX_DATA(I2C_SCL3_MARK,              PORT114_FN2, MSEL4CR_16_1),
+        PINMUX_DATA(I2C_SDA3_MARK,              PORT115_FN2, MSEL4CR_16_1),
+        PINMUX_DATA(I2C_SCL4_MARK,              PORT116_FN2, MSEL4CR_17_1),
+        PINMUX_DATA(I2C_SDA4_MARK,              PORT117_FN2, MSEL4CR_17_1),
+        PINMUX_DATA(MSIOF2_RSCK_MARK,           PORT134_FN2),
+        PINMUX_DATA(MSIOF2_RSYNC_MARK,          PORT135_FN2),
+        PINMUX_DATA(MSIOF2_MCK0_MARK,           PORT136_FN2),
+        PINMUX_DATA(MSIOF2_MCK1_MARK,           PORT137_FN2),
+        PINMUX_DATA(MSIOF2_SS1_MARK,            PORT138_FN2),
+        PINMUX_DATA(MSIOF2_SS2_MARK,            PORT139_FN2),
+        PINMUX_DATA(SCIFA3_CTS_140_MARK,        PORT140_FN2, MSEL3CR_9_1),
+        PINMUX_DATA(SCIFA3_RTS_141_MARK,        PORT141_FN2),
+        PINMUX_DATA(SCIFA3_SCK_MARK,            PORT142_FN2),
+        PINMUX_DATA(SCIFA3_TXD_MARK,            PORT143_FN2),
+        PINMUX_DATA(SCIFA3_RXD_MARK,            PORT144_FN2),
+        PINMUX_DATA(MSIOF2_TSYNC_MARK,          PORT148_FN2),
+        PINMUX_DATA(MSIOF2_TSCK_MARK,           PORT149_FN2),
+        PINMUX_DATA(MSIOF2_RXD_MARK,            PORT150_FN2),
+        PINMUX_DATA(MSIOF2_TXD_MARK,            PORT151_FN2),
+        PINMUX_DATA(SCIFA0_SCK_MARK,            PORT156_FN2),
+        PINMUX_DATA(SCIFA0_RTS_MARK,            PORT157_FN2),
+        PINMUX_DATA(SCIFA0_CTS_MARK,            PORT158_FN2),
+        PINMUX_DATA(SCIFA1_SCK_MARK,            PORT159_FN2),
+        PINMUX_DATA(SCIFA1_RTS_MARK,            PORT160_FN2),
+        PINMUX_DATA(SCIFA1_CTS_MARK,            PORT161_FN2),
+
+        /* Function 3 */
+        PINMUX_DATA(VIO_CKO1_MARK,              PORT16_FN3),
+        PINMUX_DATA(VIO_CKO2_MARK,              PORT17_FN3),
+        PINMUX_DATA(IDIN_1_18_MARK,             PORT18_FN3, MSEL4CR_14_1),
+        PINMUX_DATA(MSIOF1_TSCK_39_MARK,        PORT39_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MSIOF1_TSYNC_40_MARK,       PORT40_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MSIOF1_TXD_41_MARK,         PORT41_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MSIOF1_RXD_42_MARK,         PORT42_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MSIOF1_SS1_43_MARK,         PORT43_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MSIOF1_SS2_44_MARK,         PORT44_FN3, MSEL4CR_10_0),
+        PINMUX_DATA(MMCD1_0_MARK,               PORT54_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_1_MARK,               PORT55_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_2_MARK,               PORT56_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_3_MARK,               PORT57_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_4_MARK,               PORT58_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_5_MARK,               PORT59_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_6_MARK,               PORT60_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCD1_7_MARK,               PORT61_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(VINT_I_MARK,                PORT65_FN3),
+        PINMUX_DATA(MMCCLK1_MARK,               PORT66_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(MMCCMD1_MARK,               PORT67_FN3, MSEL4CR_15_1),
+        PINMUX_DATA(TPU0TO2_93_MARK,            PORT93_FN3),
+        PINMUX_DATA(TPU0TO2_99_MARK,            PORT99_FN3),
+        PINMUX_DATA(TPU0TO3_MARK,               PORT112_FN3),
+        PINMUX_DATA(IDIN_0_MARK,                PORT113_FN3),
+        PINMUX_DATA(EXTLP_0_MARK,               PORT114_FN3),
+        PINMUX_DATA(OVCN2_0_MARK,               PORT115_FN3),
+        PINMUX_DATA(PWEN_0_MARK,                PORT116_FN3),
+        PINMUX_DATA(OVCN_0_MARK,                PORT117_FN3),
+        PINMUX_DATA(KEYOUT7_MARK,               PORT121_FN3),
+        PINMUX_DATA(KEYOUT6_MARK,               PORT122_FN3),
+        PINMUX_DATA(KEYOUT5_MARK,               PORT123_FN3),
+        PINMUX_DATA(KEYOUT4_MARK,               PORT124_FN3),
+        PINMUX_DATA(KEYOUT3_MARK,               PORT125_FN3),
+        PINMUX_DATA(KEYOUT2_MARK,               PORT126_FN3),
+        PINMUX_DATA(KEYOUT1_MARK,               PORT127_FN3),
+        PINMUX_DATA(KEYOUT0_MARK,               PORT128_FN3),
+        PINMUX_DATA(KEYIN7_MARK,                PORT129_FN3),
+        PINMUX_DATA(KEYIN6_MARK,                PORT130_FN3),
+        PINMUX_DATA(KEYIN5_MARK,                PORT131_FN3),
+        PINMUX_DATA(KEYIN4_MARK,                PORT132_FN3),
+        PINMUX_DATA(KEYIN3_133_MARK,            PORT133_FN3, MSEL4CR_18_0),
+        PINMUX_DATA(KEYIN2_134_MARK,            PORT134_FN3, MSEL4CR_18_0),
+        PINMUX_DATA(KEYIN1_135_MARK,            PORT135_FN3, MSEL4CR_18_0),
+        PINMUX_DATA(KEYIN0_136_MARK,            PORT136_FN3, MSEL4CR_18_0),
+        PINMUX_DATA(TS_SPSYNC2_MARK,            PORT137_FN3),
+        PINMUX_DATA(IROUT_139_MARK,             PORT139_FN3),
+        PINMUX_DATA(IRDA_OUT_MARK,              PORT140_FN3),
+        PINMUX_DATA(IRDA_IN_MARK,               PORT141_FN3),
+        PINMUX_DATA(IRDA_FIRSEL_MARK,           PORT142_FN3),
+        PINMUX_DATA(TS_SDAT2_MARK,              PORT145_FN3),
+        PINMUX_DATA(TS_SDEN2_MARK,              PORT146_FN3),
+        PINMUX_DATA(TS_SCK2_MARK,               PORT147_FN3),
+
+        /* Function 4 */
+        PINMUX_DATA(SCIFA3_CTS_43_MARK, PORT43_FN4, MSEL3CR_9_0),
+        PINMUX_DATA(SCIFA3_RTS_44_MARK, PORT44_FN4),
+        PINMUX_DATA(GP_RX_FLAG_MARK,    PORT76_FN4),
+        PINMUX_DATA(GP_RX_DATA_MARK,    PORT77_FN4),
+        PINMUX_DATA(GP_TX_READY_MARK,   PORT78_FN4),
+        PINMUX_DATA(GP_RX_WAKE_MARK,    PORT79_FN4),
+        PINMUX_DATA(MP_TX_FLAG_MARK,    PORT80_FN4),
+        PINMUX_DATA(MP_TX_DATA_MARK,    PORT81_FN4),
+        PINMUX_DATA(MP_RX_READY_MARK,   PORT82_FN4),
+        PINMUX_DATA(MP_TX_WAKE_MARK,    PORT83_FN4),
+        PINMUX_DATA(MMCD0_0_MARK,       PORT84_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_1_MARK,       PORT85_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_2_MARK,       PORT86_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_3_MARK,       PORT87_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_4_MARK,       PORT88_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_5_MARK,       PORT89_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_6_MARK,       PORT90_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCD0_7_MARK,       PORT91_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(MMCCMD0_MARK,       PORT92_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(SIM_RST_MARK,       PORT94_FN4),
+        PINMUX_DATA(SIM_CLK_MARK,       PORT95_FN4),
+        PINMUX_DATA(SIM_D_MARK,         PORT98_FN4),
+        PINMUX_DATA(MMCCLK0_MARK,       PORT99_FN4, MSEL4CR_15_0),
+        PINMUX_DATA(IDIN_1_113_MARK,    PORT113_FN4, MSEL4CR_14_0),
+        PINMUX_DATA(OVCN_1_114_MARK,    PORT114_FN4, MSEL4CR_14_0),
+        PINMUX_DATA(PWEN_1_115_MARK,    PORT115_FN4),
+        PINMUX_DATA(EXTLP_1_MARK,       PORT116_FN4),
+        PINMUX_DATA(OVCN2_1_MARK,       PORT117_FN4),
+        PINMUX_DATA(KEYIN0_121_MARK,    PORT121_FN4, MSEL4CR_18_1),
+        PINMUX_DATA(KEYIN1_122_MARK,    PORT122_FN4, MSEL4CR_18_1),
+        PINMUX_DATA(KEYIN2_123_MARK,    PORT123_FN4, MSEL4CR_18_1),
+        PINMUX_DATA(KEYIN3_124_MARK,    PORT124_FN4, MSEL4CR_18_1),
+        PINMUX_DATA(PWEN_1_138_MARK,    PORT138_FN4),
+        PINMUX_DATA(IROUT_140_MARK,     PORT140_FN4),
+        PINMUX_DATA(LCDCS_MARK,         PORT145_FN4),
+        PINMUX_DATA(LCDWR_MARK,         PORT147_FN4),
+        PINMUX_DATA(LCDRS_MARK,         PORT149_FN4),
+        PINMUX_DATA(OVCN_1_162_MARK,    PORT162_FN4, MSEL4CR_14_1),
+
+        /* Function 5 */
+        PINMUX_DATA(GPI0_MARK,          PORT41_FN5),
+        PINMUX_DATA(GPI1_MARK,          PORT42_FN5),
+        PINMUX_DATA(GPO0_MARK,          PORT43_FN5),
+        PINMUX_DATA(GPO1_MARK,          PORT44_FN5),
+        PINMUX_DATA(I2C_SCL3S_MARK,     PORT137_FN5, MSEL4CR_16_0),
+        PINMUX_DATA(I2C_SDA3S_MARK,     PORT145_FN5, MSEL4CR_16_0),
+        PINMUX_DATA(I2C_SCL4S_MARK,     PORT146_FN5, MSEL4CR_17_0),
+        PINMUX_DATA(I2C_SDA4S_MARK,     PORT147_FN5, MSEL4CR_17_0),
+
+        /* Function select */
+        PINMUX_DATA(LCDC0_SELECT_MARK,  MSEL3CR_6_0),
+        PINMUX_DATA(LCDC1_SELECT_MARK,  MSEL3CR_6_1),
+
+        PINMUX_DATA(TS0_1SELECT_MARK,   MSEL3CR_21_0, MSEL3CR_20_0),
+        PINMUX_DATA(TS0_2SELECT_MARK,   MSEL3CR_21_0, MSEL3CR_20_1),
+        PINMUX_DATA(TS1_1SELECT_MARK,   MSEL3CR_27_0, MSEL3CR_26_0),
+        PINMUX_DATA(TS1_2SELECT_MARK,   MSEL3CR_27_0, MSEL3CR_26_1),
+
+        PINMUX_DATA(SDENC_CPG_MARK,     MSEL4CR_19_0),
+        PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1),
+
+        PINMUX_DATA(MFIv6_MARK,         MSEL4CR_6_0),
+        PINMUX_DATA(MFIv4_MARK,         MSEL4CR_6_1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_ALL() _190(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+        /* PORT */
+        GPIO_PORT_ALL(),
+
+        /* IRQ */
+        GPIO_FN(IRQ0_6),        GPIO_FN(IRQ0_162),      GPIO_FN(IRQ1),
+        GPIO_FN(IRQ2_4),        GPIO_FN(IRQ2_5),        GPIO_FN(IRQ3_8),
+        GPIO_FN(IRQ3_16),       GPIO_FN(IRQ4_17),       GPIO_FN(IRQ4_163),
+        GPIO_FN(IRQ5),          GPIO_FN(IRQ6_39),       GPIO_FN(IRQ6_164),
+        GPIO_FN(IRQ7_40),       GPIO_FN(IRQ7_167),      GPIO_FN(IRQ8_41),
+        GPIO_FN(IRQ8_168),      GPIO_FN(IRQ9_42),       GPIO_FN(IRQ9_169),
+        GPIO_FN(IRQ10),         GPIO_FN(IRQ11),         GPIO_FN(IRQ12_80),
+        GPIO_FN(IRQ12_137),     GPIO_FN(IRQ13_81),      GPIO_FN(IRQ13_145),
+        GPIO_FN(IRQ14_82),      GPIO_FN(IRQ14_146),     GPIO_FN(IRQ15_83),
+        GPIO_FN(IRQ15_147),     GPIO_FN(IRQ16_84),      GPIO_FN(IRQ16_170),
+        GPIO_FN(IRQ17),         GPIO_FN(IRQ18),         GPIO_FN(IRQ19),
+        GPIO_FN(IRQ20),         GPIO_FN(IRQ21),         GPIO_FN(IRQ22),
+        GPIO_FN(IRQ23),         GPIO_FN(IRQ24),         GPIO_FN(IRQ25),
+        GPIO_FN(IRQ26_121),     GPIO_FN(IRQ26_172),     GPIO_FN(IRQ27_122),
+        GPIO_FN(IRQ27_180),     GPIO_FN(IRQ28_123),     GPIO_FN(IRQ28_181),
+        GPIO_FN(IRQ29_129),     GPIO_FN(IRQ29_182),     GPIO_FN(IRQ30_130),
+        GPIO_FN(IRQ30_183),     GPIO_FN(IRQ31_138),     GPIO_FN(IRQ31_184),
+
+        /* MSIOF0 */
+        GPIO_FN(MSIOF0_TSYNC),  GPIO_FN(MSIOF0_TSCK),   GPIO_FN(MSIOF0_RXD),
+        GPIO_FN(MSIOF0_RSCK),   GPIO_FN(MSIOF0_RSYNC),  GPIO_FN(MSIOF0_MCK0),
+        GPIO_FN(MSIOF0_MCK1),   GPIO_FN(MSIOF0_SS1),    GPIO_FN(MSIOF0_SS2),
+        GPIO_FN(MSIOF0_TXD),
+
+        /* MSIOF1 */
+        GPIO_FN(MSIOF1_TSCK_39),        GPIO_FN(MSIOF1_TSCK_88),
+        GPIO_FN(MSIOF1_TSYNC_40),       GPIO_FN(MSIOF1_TSYNC_89),
+        GPIO_FN(MSIOF1_TXD_41),         GPIO_FN(MSIOF1_TXD_90),
+        GPIO_FN(MSIOF1_RXD_42),         GPIO_FN(MSIOF1_RXD_91),
+        GPIO_FN(MSIOF1_SS1_43),         GPIO_FN(MSIOF1_SS1_92),
+        GPIO_FN(MSIOF1_SS2_44),         GPIO_FN(MSIOF1_SS2_93),
+        GPIO_FN(MSIOF1_RSCK),           GPIO_FN(MSIOF1_RSYNC),
+        GPIO_FN(MSIOF1_MCK0),           GPIO_FN(MSIOF1_MCK1),
+
+        /* MSIOF2 */
+        GPIO_FN(MSIOF2_RSCK),   GPIO_FN(MSIOF2_RSYNC),  GPIO_FN(MSIOF2_MCK0),
+        GPIO_FN(MSIOF2_MCK1),   GPIO_FN(MSIOF2_SS1),    GPIO_FN(MSIOF2_SS2),
+        GPIO_FN(MSIOF2_TSYNC),  GPIO_FN(MSIOF2_TSCK),   GPIO_FN(MSIOF2_RXD),
+        GPIO_FN(MSIOF2_TXD),
+
+        /* MSIOF3 */
+        GPIO_FN(BBIF1_RXD),     GPIO_FN(BBIF1_TSYNC),   GPIO_FN(BBIF1_TSCK),
+        GPIO_FN(BBIF1_TXD),     GPIO_FN(BBIF1_RSCK),    GPIO_FN(BBIF1_RSYNC),
+        GPIO_FN(BBIF1_FLOW),    GPIO_FN(BB_RX_FLOW_N),
+
+        /* MSIOF4 */
+        GPIO_FN(BBIF2_TSCK1),   GPIO_FN(BBIF2_TSYNC1),
+        GPIO_FN(BBIF2_TXD1),    GPIO_FN(BBIF2_RXD),
+
+        /* FSI */
+        GPIO_FN(FSIACK),        GPIO_FN(FSIBCK),        GPIO_FN(FSIAILR),
+        GPIO_FN(FSIAIBT),       GPIO_FN(FSIAISLD),      GPIO_FN(FSIAOMC),
+        GPIO_FN(FSIAOLR),       GPIO_FN(FSIAOBT),       GPIO_FN(FSIAOSLD),
+        GPIO_FN(FSIASPDIF_11),  GPIO_FN(FSIASPDIF_15),
+
+        /* FMSI */
+        GPIO_FN(FMSOCK),        GPIO_FN(FMSOOLR),       GPIO_FN(FMSIOLR),
+        GPIO_FN(FMSOOBT),       GPIO_FN(FMSIOBT),       GPIO_FN(FMSOSLD),
+        GPIO_FN(FMSOILR),       GPIO_FN(FMSIILR),       GPIO_FN(FMSOIBT),
+        GPIO_FN(FMSIIBT),       GPIO_FN(FMSISLD),       GPIO_FN(FMSICK),
+
+        /* SCIFA0 */
+        GPIO_FN(SCIFA0_TXD),    GPIO_FN(SCIFA0_RXD),    GPIO_FN(SCIFA0_SCK),
+        GPIO_FN(SCIFA0_RTS),    GPIO_FN(SCIFA0_CTS),
+
+        /* SCIFA1 */
+        GPIO_FN(SCIFA1_TXD),    GPIO_FN(SCIFA1_RXD),    GPIO_FN(SCIFA1_SCK),
+        GPIO_FN(SCIFA1_RTS),    GPIO_FN(SCIFA1_CTS),
+
+        /* SCIFA2 */
+        GPIO_FN(SCIFA2_CTS1),   GPIO_FN(SCIFA2_RTS1),   GPIO_FN(SCIFA2_TXD1),
+        GPIO_FN(SCIFA2_RXD1),   GPIO_FN(SCIFA2_SCK1),
+
+        /* SCIFA3 */
+        GPIO_FN(SCIFA3_CTS_43),         GPIO_FN(SCIFA3_CTS_140),
+        GPIO_FN(SCIFA3_RTS_44),         GPIO_FN(SCIFA3_RTS_141),
+        GPIO_FN(SCIFA3_SCK),            GPIO_FN(SCIFA3_TXD),
+        GPIO_FN(SCIFA3_RXD),
+
+        /* SCIFA4 */
+        GPIO_FN(SCIFA4_RXD),    GPIO_FN(SCIFA4_TXD),
+
+        /* SCIFA5 */
+        GPIO_FN(SCIFA5_RXD),    GPIO_FN(SCIFA5_TXD),
+
+        /* SCIFB */
+        GPIO_FN(SCIFB_SCK),     GPIO_FN(SCIFB_RTS),     GPIO_FN(SCIFB_CTS),
+        GPIO_FN(SCIFB_TXD),     GPIO_FN(SCIFB_RXD),
+
+        /* CEU */
+        GPIO_FN(VIO_HD),        GPIO_FN(VIO_CKO1),      GPIO_FN(VIO_CKO2),
+        GPIO_FN(VIO_VD),        GPIO_FN(VIO_CLK),       GPIO_FN(VIO_FIELD),
+        GPIO_FN(VIO_CKO),       GPIO_FN(VIO_D0),        GPIO_FN(VIO_D1),
+        GPIO_FN(VIO_D2),        GPIO_FN(VIO_D3),        GPIO_FN(VIO_D4),
+        GPIO_FN(VIO_D5),        GPIO_FN(VIO_D6),        GPIO_FN(VIO_D7),
+        GPIO_FN(VIO_D8),        GPIO_FN(VIO_D9),        GPIO_FN(VIO_D10),
+        GPIO_FN(VIO_D11),       GPIO_FN(VIO_D12),       GPIO_FN(VIO_D13),
+        GPIO_FN(VIO_D14),       GPIO_FN(VIO_D15),
+
+        /* USB0 */
+        GPIO_FN(IDIN_0),        GPIO_FN(EXTLP_0),       GPIO_FN(OVCN2_0),
+        GPIO_FN(PWEN_0),        GPIO_FN(OVCN_0),        GPIO_FN(VBUS0_0),
+
+        /* USB1 */
+        GPIO_FN(IDIN_1_18),     GPIO_FN(IDIN_1_113),
+        GPIO_FN(OVCN_1_114),    GPIO_FN(OVCN_1_162),
+        GPIO_FN(PWEN_1_115),    GPIO_FN(PWEN_1_138),
+        GPIO_FN(EXTLP_1),       GPIO_FN(OVCN2_1),
+        GPIO_FN(VBUS0_1),
+
+        /* GPIO */
+        GPIO_FN(GPI0),  GPIO_FN(GPI1),  GPIO_FN(GPO0),  GPIO_FN(GPO1),
+
+        /* BSC */
+        GPIO_FN(BS),    GPIO_FN(WE1),   GPIO_FN(CKO),
+        GPIO_FN(WAIT),  GPIO_FN(RDWR),
+
+        GPIO_FN(A0),    GPIO_FN(A1),    GPIO_FN(A2),
+        GPIO_FN(A3),    GPIO_FN(A6),    GPIO_FN(A7),
+        GPIO_FN(A8),    GPIO_FN(A9),    GPIO_FN(A10),
+        GPIO_FN(A11),   GPIO_FN(A12),   GPIO_FN(A13),
+        GPIO_FN(A14),   GPIO_FN(A15),   GPIO_FN(A16),
+        GPIO_FN(A17),   GPIO_FN(A18),   GPIO_FN(A19),
+        GPIO_FN(A20),   GPIO_FN(A21),   GPIO_FN(A22),
+        GPIO_FN(A23),   GPIO_FN(A24),   GPIO_FN(A25),
+        GPIO_FN(A26),
+
+        GPIO_FN(CS0),   GPIO_FN(CS2),   GPIO_FN(CS4),
+        GPIO_FN(CS5A),  GPIO_FN(CS5B),  GPIO_FN(CS6A),
+
+        /* BSC/FLCTL */
+        GPIO_FN(RD_FSC),        GPIO_FN(WE0_FWE),       GPIO_FN(A4_FOE),
+        GPIO_FN(A5_FCDE),       GPIO_FN(D0_NAF0),       GPIO_FN(D1_NAF1),
+        GPIO_FN(D2_NAF2),       GPIO_FN(D3_NAF3),       GPIO_FN(D4_NAF4),
+        GPIO_FN(D5_NAF5),       GPIO_FN(D6_NAF6),       GPIO_FN(D7_NAF7),
+        GPIO_FN(D8_NAF8),       GPIO_FN(D9_NAF9),       GPIO_FN(D10_NAF10),
+        GPIO_FN(D11_NAF11),     GPIO_FN(D12_NAF12),     GPIO_FN(D13_NAF13),
+        GPIO_FN(D14_NAF14),     GPIO_FN(D15_NAF15),
+
+        /* MMCIF(1) */
+        GPIO_FN(MMCD0_0),       GPIO_FN(MMCD0_1),       GPIO_FN(MMCD0_2),
+        GPIO_FN(MMCD0_3),       GPIO_FN(MMCD0_4),       GPIO_FN(MMCD0_5),
+        GPIO_FN(MMCD0_6),       GPIO_FN(MMCD0_7),       GPIO_FN(MMCCMD0),
+        GPIO_FN(MMCCLK0),
+
+        /* MMCIF(2) */
+        GPIO_FN(MMCD1_0),       GPIO_FN(MMCD1_1),       GPIO_FN(MMCD1_2),
+        GPIO_FN(MMCD1_3),       GPIO_FN(MMCD1_4),       GPIO_FN(MMCD1_5),
+        GPIO_FN(MMCD1_6),       GPIO_FN(MMCD1_7),       GPIO_FN(MMCCLK1),
+        GPIO_FN(MMCCMD1),
+
+        /* SPU2 */
+        GPIO_FN(VINT_I),
+
+        /* FLCTL */
+        GPIO_FN(FCE1),  GPIO_FN(FCE0),  GPIO_FN(FRB),
+
+        /* HSI */
+        GPIO_FN(GP_RX_FLAG),    GPIO_FN(GP_RX_DATA),    GPIO_FN(GP_TX_READY),
+        GPIO_FN(GP_RX_WAKE),    GPIO_FN(MP_TX_FLAG),    GPIO_FN(MP_TX_DATA),
+        GPIO_FN(MP_RX_READY),   GPIO_FN(MP_TX_WAKE),
+
+        /* MFI */
+        GPIO_FN(MFIv6),
+        GPIO_FN(MFIv4),
+
+        GPIO_FN(MEMC_BUSCLK_MEMC_A0),   GPIO_FN(MEMC_ADV_MEMC_DREQ0),
+        GPIO_FN(MEMC_WAIT_MEMC_DREQ1),  GPIO_FN(MEMC_CS1_MEMC_A1),
+        GPIO_FN(MEMC_CS0),      GPIO_FN(MEMC_NOE),
+        GPIO_FN(MEMC_NWE),      GPIO_FN(MEMC_INT),
+
+        GPIO_FN(MEMC_AD0),      GPIO_FN(MEMC_AD1),      GPIO_FN(MEMC_AD2),
+        GPIO_FN(MEMC_AD3),      GPIO_FN(MEMC_AD4),      GPIO_FN(MEMC_AD5),
+        GPIO_FN(MEMC_AD6),      GPIO_FN(MEMC_AD7),      GPIO_FN(MEMC_AD8),
+        GPIO_FN(MEMC_AD9),      GPIO_FN(MEMC_AD10),     GPIO_FN(MEMC_AD11),
+        GPIO_FN(MEMC_AD12),     GPIO_FN(MEMC_AD13),     GPIO_FN(MEMC_AD14),
+        GPIO_FN(MEMC_AD15),
+
+        /* SIM */
+        GPIO_FN(SIM_RST),       GPIO_FN(SIM_CLK),       GPIO_FN(SIM_D),
+
+        /* TPU */
+        GPIO_FN(TPU0TO0),       GPIO_FN(TPU0TO1),       GPIO_FN(TPU0TO2_93),
+        GPIO_FN(TPU0TO2_99),    GPIO_FN(TPU0TO3),
+
+        /* I2C2 */
+        GPIO_FN(I2C_SCL2),      GPIO_FN(I2C_SDA2),
+
+        /* I2C3(1) */
+        GPIO_FN(I2C_SCL3),      GPIO_FN(I2C_SDA3),
+
+        /* I2C3(2) */
+        GPIO_FN(I2C_SCL3S),     GPIO_FN(I2C_SDA3S),
+
+        /* I2C4(2) */
+        GPIO_FN(I2C_SCL4),      GPIO_FN(I2C_SDA4),
+
+        /* I2C4(2) */
+        GPIO_FN(I2C_SCL4S),     GPIO_FN(I2C_SDA4S),
+
+        /* KEYSC */
+        GPIO_FN(KEYOUT0),       GPIO_FN(KEYIN0_121),    GPIO_FN(KEYIN0_136),
+        GPIO_FN(KEYOUT1),       GPIO_FN(KEYIN1_122),    GPIO_FN(KEYIN1_135),
+        GPIO_FN(KEYOUT2),       GPIO_FN(KEYIN2_123),    GPIO_FN(KEYIN2_134),
+        GPIO_FN(KEYOUT3),       GPIO_FN(KEYIN3_124),    GPIO_FN(KEYIN3_133),
+        GPIO_FN(KEYOUT4),       GPIO_FN(KEYIN4),        GPIO_FN(KEYOUT5),
+        GPIO_FN(KEYIN5),        GPIO_FN(KEYOUT6),       GPIO_FN(KEYIN6),
+        GPIO_FN(KEYOUT7),       GPIO_FN(KEYIN7),
+
+        /* LCDC */
+        GPIO_FN(LCDHSYN),       GPIO_FN(LCDCS), GPIO_FN(LCDVSYN),
+        GPIO_FN(LCDDCK),        GPIO_FN(LCDWR), GPIO_FN(LCDRD),
+        GPIO_FN(LCDDISP),       GPIO_FN(LCDRS), GPIO_FN(LCDLCLK),
+        GPIO_FN(LCDDON),
+
+        GPIO_FN(LCDD0),         GPIO_FN(LCDD1),         GPIO_FN(LCDD2),
+        GPIO_FN(LCDD3),         GPIO_FN(LCDD4),         GPIO_FN(LCDD5),
+        GPIO_FN(LCDD6),         GPIO_FN(LCDD7),         GPIO_FN(LCDD8),
+        GPIO_FN(LCDD9),         GPIO_FN(LCDD10),        GPIO_FN(LCDD11),
+        GPIO_FN(LCDD12),        GPIO_FN(LCDD13),        GPIO_FN(LCDD14),
+        GPIO_FN(LCDD15),        GPIO_FN(LCDD16),        GPIO_FN(LCDD17),
+        GPIO_FN(LCDD18),        GPIO_FN(LCDD19),        GPIO_FN(LCDD20),
+        GPIO_FN(LCDD21),        GPIO_FN(LCDD22),        GPIO_FN(LCDD23),
+
+        /* IRDA */
+        GPIO_FN(IRDA_OUT),      GPIO_FN(IRDA_IN),       GPIO_FN(IRDA_FIRSEL),
+        GPIO_FN(IROUT_139),     GPIO_FN(IROUT_140),
+
+        /* TSIF1 */
+        GPIO_FN(TS0_1SELECT),
+        GPIO_FN(TS0_2SELECT),
+        GPIO_FN(TS1_1SELECT),
+        GPIO_FN(TS1_2SELECT),
+
+        GPIO_FN(TS_SPSYNC1),    GPIO_FN(TS_SDAT1),
+        GPIO_FN(TS_SDEN1),      GPIO_FN(TS_SCK1),
+
+        /* TSIF2 */
+        GPIO_FN(TS_SPSYNC2),    GPIO_FN(TS_SDAT2),
+        GPIO_FN(TS_SDEN2),      GPIO_FN(TS_SCK2),
+
+        /* HDMI */
+        GPIO_FN(HDMI_HPD),      GPIO_FN(HDMI_CEC),
+
+        /* SDHI0 */
+        GPIO_FN(SDHICLK0),      GPIO_FN(SDHICD0),       GPIO_FN(SDHICMD0),
+        GPIO_FN(SDHIWP0),       GPIO_FN(SDHID0_0),      GPIO_FN(SDHID0_1),
+        GPIO_FN(SDHID0_2),      GPIO_FN(SDHID0_3),
+
+        /* SDHI1 */
+        GPIO_FN(SDHICLK1),      GPIO_FN(SDHICMD1),      GPIO_FN(SDHID1_0),
+        GPIO_FN(SDHID1_1),      GPIO_FN(SDHID1_2),      GPIO_FN(SDHID1_3),
+
+        /* SDHI2 */
+        GPIO_FN(SDHICLK2),      GPIO_FN(SDHICMD2),      GPIO_FN(SDHID2_0),
+        GPIO_FN(SDHID2_1),      GPIO_FN(SDHID2_2),      GPIO_FN(SDHID2_3),
+
+        /* SDENC */
+        GPIO_FN(SDENC_CPG),
+        GPIO_FN(SDENC_DV_CLKI),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)             \
+        0, (out), (in), 0,                      \
+        0, 0, 0, 0,                             \
+        0, 0, (in_pd), 0,                       \
+        0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg)                                         \
+        { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {           \
+                PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,           \
+                     PORT##nr##_IN_PU, PORT##nr##_OUT),         \
+                PORT##nr##_FN0, PORT##nr##_FN1, PORT##nr##_FN2, \
+                PORT##nr##_FN3, PORT##nr##_FN4, PORT##nr##_FN5, \
+                PORT##nr##_FN6, PORT##nr##_FN7 }                \
+        }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+        PORTCR(0,       0xE6051000), /* PORT0CR */
+        PORTCR(1,       0xE6051001), /* PORT1CR */
+        PORTCR(2,       0xE6051002), /* PORT2CR */
+        PORTCR(3,       0xE6051003), /* PORT3CR */
+        PORTCR(4,       0xE6051004), /* PORT4CR */
+        PORTCR(5,       0xE6051005), /* PORT5CR */
+        PORTCR(6,       0xE6051006), /* PORT6CR */
+        PORTCR(7,       0xE6051007), /* PORT7CR */
+        PORTCR(8,       0xE6051008), /* PORT8CR */
+        PORTCR(9,       0xE6051009), /* PORT9CR */
+        PORTCR(10,      0xE605100A), /* PORT10CR */
+        PORTCR(11,      0xE605100B), /* PORT11CR */
+        PORTCR(12,      0xE605100C), /* PORT12CR */
+        PORTCR(13,      0xE605100D), /* PORT13CR */
+        PORTCR(14,      0xE605100E), /* PORT14CR */
+        PORTCR(15,      0xE605100F), /* PORT15CR */
+        PORTCR(16,      0xE6051010), /* PORT16CR */
+        PORTCR(17,      0xE6051011), /* PORT17CR */
+        PORTCR(18,      0xE6051012), /* PORT18CR */
+        PORTCR(19,      0xE6051013), /* PORT19CR */
+        PORTCR(20,      0xE6051014), /* PORT20CR */
+        PORTCR(21,      0xE6051015), /* PORT21CR */
+        PORTCR(22,      0xE6051016), /* PORT22CR */
+        PORTCR(23,      0xE6051017), /* PORT23CR */
+        PORTCR(24,      0xE6051018), /* PORT24CR */
+        PORTCR(25,      0xE6051019), /* PORT25CR */
+        PORTCR(26,      0xE605101A), /* PORT26CR */
+        PORTCR(27,      0xE605101B), /* PORT27CR */
+        PORTCR(28,      0xE605101C), /* PORT28CR */
+        PORTCR(29,      0xE605101D), /* PORT29CR */
+        PORTCR(30,      0xE605101E), /* PORT30CR */
+        PORTCR(31,      0xE605101F), /* PORT31CR */
+        PORTCR(32,      0xE6051020), /* PORT32CR */
+        PORTCR(33,      0xE6051021), /* PORT33CR */
+        PORTCR(34,      0xE6051022), /* PORT34CR */
+        PORTCR(35,      0xE6051023), /* PORT35CR */
+        PORTCR(36,      0xE6051024), /* PORT36CR */
+        PORTCR(37,      0xE6051025), /* PORT37CR */
+        PORTCR(38,      0xE6051026), /* PORT38CR */
+        PORTCR(39,      0xE6051027), /* PORT39CR */
+        PORTCR(40,      0xE6051028), /* PORT40CR */
+        PORTCR(41,      0xE6051029), /* PORT41CR */
+        PORTCR(42,      0xE605102A), /* PORT42CR */
+        PORTCR(43,      0xE605102B), /* PORT43CR */
+        PORTCR(44,      0xE605102C), /* PORT44CR */
+        PORTCR(45,      0xE605102D), /* PORT45CR */
+        PORTCR(46,      0xE605202E), /* PORT46CR */
+        PORTCR(47,      0xE605202F), /* PORT47CR */
+        PORTCR(48,      0xE6052030), /* PORT48CR */
+        PORTCR(49,      0xE6052031), /* PORT49CR */
+        PORTCR(50,      0xE6052032), /* PORT50CR */
+        PORTCR(51,      0xE6052033), /* PORT51CR */
+        PORTCR(52,      0xE6052034), /* PORT52CR */
+        PORTCR(53,      0xE6052035), /* PORT53CR */
+        PORTCR(54,      0xE6052036), /* PORT54CR */
+        PORTCR(55,      0xE6052037), /* PORT55CR */
+        PORTCR(56,      0xE6052038), /* PORT56CR */
+        PORTCR(57,      0xE6052039), /* PORT57CR */
+        PORTCR(58,      0xE605203A), /* PORT58CR */
+        PORTCR(59,      0xE605203B), /* PORT59CR */
+        PORTCR(60,      0xE605203C), /* PORT60CR */
+        PORTCR(61,      0xE605203D), /* PORT61CR */
+        PORTCR(62,      0xE605203E), /* PORT62CR */
+        PORTCR(63,      0xE605203F), /* PORT63CR */
+        PORTCR(64,      0xE6052040), /* PORT64CR */
+        PORTCR(65,      0xE6052041), /* PORT65CR */
+        PORTCR(66,      0xE6052042), /* PORT66CR */
+        PORTCR(67,      0xE6052043), /* PORT67CR */
+        PORTCR(68,      0xE6052044), /* PORT68CR */
+        PORTCR(69,      0xE6052045), /* PORT69CR */
+        PORTCR(70,      0xE6052046), /* PORT70CR */
+        PORTCR(71,      0xE6052047), /* PORT71CR */
+        PORTCR(72,      0xE6052048), /* PORT72CR */
+        PORTCR(73,      0xE6052049), /* PORT73CR */
+        PORTCR(74,      0xE605204A), /* PORT74CR */
+        PORTCR(75,      0xE605204B), /* PORT75CR */
+        PORTCR(76,      0xE605004C), /* PORT76CR */
+        PORTCR(77,      0xE605004D), /* PORT77CR */
+        PORTCR(78,      0xE605004E), /* PORT78CR */
+        PORTCR(79,      0xE605004F), /* PORT79CR */
+        PORTCR(80,      0xE6050050), /* PORT80CR */
+        PORTCR(81,      0xE6050051), /* PORT81CR */
+        PORTCR(82,      0xE6050052), /* PORT82CR */
+        PORTCR(83,      0xE6050053), /* PORT83CR */
+        PORTCR(84,      0xE6050054), /* PORT84CR */
+        PORTCR(85,      0xE6050055), /* PORT85CR */
+        PORTCR(86,      0xE6050056), /* PORT86CR */
+        PORTCR(87,      0xE6050057), /* PORT87CR */
+        PORTCR(88,      0xE6050058), /* PORT88CR */
+        PORTCR(89,      0xE6050059), /* PORT89CR */
+        PORTCR(90,      0xE605005A), /* PORT90CR */
+        PORTCR(91,      0xE605005B), /* PORT91CR */
+        PORTCR(92,      0xE605005C), /* PORT92CR */
+        PORTCR(93,      0xE605005D), /* PORT93CR */
+        PORTCR(94,      0xE605005E), /* PORT94CR */
+        PORTCR(95,      0xE605005F), /* PORT95CR */
+        PORTCR(96,      0xE6050060), /* PORT96CR */
+        PORTCR(97,      0xE6050061), /* PORT97CR */
+        PORTCR(98,      0xE6050062), /* PORT98CR */
+        PORTCR(99,      0xE6050063), /* PORT99CR */
+        PORTCR(100,     0xE6053064), /* PORT100CR */
+        PORTCR(101,     0xE6053065), /* PORT101CR */
+        PORTCR(102,     0xE6053066), /* PORT102CR */
+        PORTCR(103,     0xE6053067), /* PORT103CR */
+        PORTCR(104,     0xE6053068), /* PORT104CR */
+        PORTCR(105,     0xE6053069), /* PORT105CR */
+        PORTCR(106,     0xE605306A), /* PORT106CR */
+        PORTCR(107,     0xE605306B), /* PORT107CR */
+        PORTCR(108,     0xE605306C), /* PORT108CR */
+        PORTCR(109,     0xE605306D), /* PORT109CR */
+        PORTCR(110,     0xE605306E), /* PORT110CR */
+        PORTCR(111,     0xE605306F), /* PORT111CR */
+        PORTCR(112,     0xE6053070), /* PORT112CR */
+        PORTCR(113,     0xE6053071), /* PORT113CR */
+        PORTCR(114,     0xE6053072), /* PORT114CR */
+        PORTCR(115,     0xE6053073), /* PORT115CR */
+        PORTCR(116,     0xE6053074), /* PORT116CR */
+        PORTCR(117,     0xE6053075), /* PORT117CR */
+        PORTCR(118,     0xE6053076), /* PORT118CR */
+        PORTCR(119,     0xE6053077), /* PORT119CR */
+        PORTCR(120,     0xE6053078), /* PORT120CR */
+        PORTCR(121,     0xE6050079), /* PORT121CR */
+        PORTCR(122,     0xE605007A), /* PORT122CR */
+        PORTCR(123,     0xE605007B), /* PORT123CR */
+        PORTCR(124,     0xE605007C), /* PORT124CR */
+        PORTCR(125,     0xE605007D), /* PORT125CR */
+        PORTCR(126,     0xE605007E), /* PORT126CR */
+        PORTCR(127,     0xE605007F), /* PORT127CR */
+        PORTCR(128,     0xE6050080), /* PORT128CR */
+        PORTCR(129,     0xE6050081), /* PORT129CR */
+        PORTCR(130,     0xE6050082), /* PORT130CR */
+        PORTCR(131,     0xE6050083), /* PORT131CR */
+        PORTCR(132,     0xE6050084), /* PORT132CR */
+        PORTCR(133,     0xE6050085), /* PORT133CR */
+        PORTCR(134,     0xE6050086), /* PORT134CR */
+        PORTCR(135,     0xE6050087), /* PORT135CR */
+        PORTCR(136,     0xE6050088), /* PORT136CR */
+        PORTCR(137,     0xE6050089), /* PORT137CR */
+        PORTCR(138,     0xE605008A), /* PORT138CR */
+        PORTCR(139,     0xE605008B), /* PORT139CR */
+        PORTCR(140,     0xE605008C), /* PORT140CR */
+        PORTCR(141,     0xE605008D), /* PORT141CR */
+        PORTCR(142,     0xE605008E), /* PORT142CR */
+        PORTCR(143,     0xE605008F), /* PORT143CR */
+        PORTCR(144,     0xE6050090), /* PORT144CR */
+        PORTCR(145,     0xE6050091), /* PORT145CR */
+        PORTCR(146,     0xE6050092), /* PORT146CR */
+        PORTCR(147,     0xE6050093), /* PORT147CR */
+        PORTCR(148,     0xE6050094), /* PORT148CR */
+        PORTCR(149,     0xE6050095), /* PORT149CR */
+        PORTCR(150,     0xE6050096), /* PORT150CR */
+        PORTCR(151,     0xE6050097), /* PORT151CR */
+        PORTCR(152,     0xE6053098), /* PORT152CR */
+        PORTCR(153,     0xE6053099), /* PORT153CR */
+        PORTCR(154,     0xE605309A), /* PORT154CR */
+        PORTCR(155,     0xE605309B), /* PORT155CR */
+        PORTCR(156,     0xE605009C), /* PORT156CR */
+        PORTCR(157,     0xE605009D), /* PORT157CR */
+        PORTCR(158,     0xE605009E), /* PORT158CR */
+        PORTCR(159,     0xE605009F), /* PORT159CR */
+        PORTCR(160,     0xE60500A0), /* PORT160CR */
+        PORTCR(161,     0xE60500A1), /* PORT161CR */
+        PORTCR(162,     0xE60500A2), /* PORT162CR */
+        PORTCR(163,     0xE60500A3), /* PORT163CR */
+        PORTCR(164,     0xE60500A4), /* PORT164CR */
+        PORTCR(165,     0xE60500A5), /* PORT165CR */
+        PORTCR(166,     0xE60500A6), /* PORT166CR */
+        PORTCR(167,     0xE60520A7), /* PORT167CR */
+        PORTCR(168,     0xE60520A8), /* PORT168CR */
+        PORTCR(169,     0xE60520A9), /* PORT169CR */
+        PORTCR(170,     0xE60520AA), /* PORT170CR */
+        PORTCR(171,     0xE60520AB), /* PORT171CR */
+        PORTCR(172,     0xE60520AC), /* PORT172CR */
+        PORTCR(173,     0xE60520AD), /* PORT173CR */
+        PORTCR(174,     0xE60520AE), /* PORT174CR */
+        PORTCR(175,     0xE60520AF), /* PORT175CR */
+        PORTCR(176,     0xE60520B0), /* PORT176CR */
+        PORTCR(177,     0xE60520B1), /* PORT177CR */
+        PORTCR(178,     0xE60520B2), /* PORT178CR */
+        PORTCR(179,     0xE60520B3), /* PORT179CR */
+        PORTCR(180,     0xE60520B4), /* PORT180CR */
+        PORTCR(181,     0xE60520B5), /* PORT181CR */
+        PORTCR(182,     0xE60520B6), /* PORT182CR */
+        PORTCR(183,     0xE60520B7), /* PORT183CR */
+        PORTCR(184,     0xE60520B8), /* PORT184CR */
+        PORTCR(185,     0xE60520B9), /* PORT185CR */
+        PORTCR(186,     0xE60520BA), /* PORT186CR */
+        PORTCR(187,     0xE60520BB), /* PORT187CR */
+        PORTCR(188,     0xE60520BC), /* PORT188CR */
+        PORTCR(189,     0xE60520BD), /* PORT189CR */
+        PORTCR(190,     0xE60520BE), /* PORT190CR */
+
+        { PINMUX_CFG_REG("MSEL1CR", 0xE605800C, 32, 1) {
+                        MSEL1CR_31_0,   MSEL1CR_31_1,
+                        MSEL1CR_30_0,   MSEL1CR_30_1,
+                        MSEL1CR_29_0,   MSEL1CR_29_1,
+                        MSEL1CR_28_0,   MSEL1CR_28_1,
+                        MSEL1CR_27_0,   MSEL1CR_27_1,
+                        MSEL1CR_26_0,   MSEL1CR_26_1,
+                        0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                        0, 0, 0, 0, 0, 0, 0, 0,
+                        MSEL1CR_16_0,   MSEL1CR_16_1,
+                        MSEL1CR_15_0,   MSEL1CR_15_1,
+                        MSEL1CR_14_0,   MSEL1CR_14_1,
+                        MSEL1CR_13_0,   MSEL1CR_13_1,
+                        MSEL1CR_12_0,   MSEL1CR_12_1,
+                        0, 0, 0, 0,
+                        MSEL1CR_9_0,    MSEL1CR_9_1,
+                        MSEL1CR_8_0,    MSEL1CR_8_1,
+                        MSEL1CR_7_0,    MSEL1CR_7_1,
+                        MSEL1CR_6_0,    MSEL1CR_6_1,
+                        0, 0,
+                        MSEL1CR_4_0,    MSEL1CR_4_1,
+                        MSEL1CR_3_0,    MSEL1CR_3_1,
+                        MSEL1CR_2_0,    MSEL1CR_2_1,
+                        0, 0,
+                        MSEL1CR_0_0,    MSEL1CR_0_1,
+                }
+        },
+        { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        MSEL3CR_27_0,   MSEL3CR_27_1,
+                        MSEL3CR_26_0,   MSEL3CR_26_1,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        MSEL3CR_21_0,   MSEL3CR_21_1,
+                        MSEL3CR_20_0,   MSEL3CR_20_1,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        MSEL3CR_15_0,   MSEL3CR_15_1,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0,
+                        MSEL3CR_9_0,    MSEL3CR_9_1,
+                        0, 0, 0, 0,
+                        MSEL3CR_6_0,    MSEL3CR_6_1,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        }
+        },
+        { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        MSEL4CR_19_0,   MSEL4CR_19_1,
+                        MSEL4CR_18_0,   MSEL4CR_18_1,
+                        MSEL4CR_17_0,   MSEL4CR_17_1,
+                        MSEL4CR_16_0,   MSEL4CR_16_1,
+                        MSEL4CR_15_0,   MSEL4CR_15_1,
+                        MSEL4CR_14_0,   MSEL4CR_14_1,
+                        0, 0, 0, 0,
+                        0, 0,
+                        MSEL4CR_10_0,   MSEL4CR_10_1,
+                        0, 0, 0, 0,
+                        0, 0,
+                        MSEL4CR_6_0,    MSEL4CR_6_1,
+                        0, 0,
+                        MSEL4CR_4_0,    MSEL4CR_4_1,
+                        0, 0, 0, 0,
+                        MSEL4CR_1_0,    MSEL4CR_1_1,
+                        0, 0,
+                }
+        },
+        { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+        { PINMUX_DATA_REG("PORTL095_064DR", 0xE6054008, 32) {
+                        PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+                        PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+                        PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+                        PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+                        PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                }
+        },
+        { PINMUX_DATA_REG("PORTL127_096DR", 0xE605400C, 32) {
+                        PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+                        PORT123_DATA, PORT122_DATA, PORT121_DATA, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        PORT99_DATA,  PORT98_DATA,  PORT97_DATA,  PORT96_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTL159_128DR", 0xE6054010, 32) {
+                        PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+                        0, 0, 0, 0,
+                        PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+                        PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+                        PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+                        PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+                        PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+                        PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTL191_160DR", 0xE6054014, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0,            PORT166_DATA, PORT165_DATA, PORT164_DATA,
+                        PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTD031_000DR", 0xE6055000, 32) {
+                        PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+                        PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+                        PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+                        PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+                        PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+                        PORT11_DATA, PORT10_DATA, PORT9_DATA,  PORT8_DATA,
+                        PORT7_DATA,  PORT6_DATA,  PORT5_DATA,  PORT4_DATA,
+                        PORT3_DATA,  PORT2_DATA,  PORT1_DATA,  PORT0_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTD063_032DR", 0xE6055004, 32) {
+                        0, 0, 0, 0, 0, 0, 0, 0,
+                        0, 0, 0, 0, 0, 0, 0, 0,
+                        0,           0,           PORT45_DATA, PORT44_DATA,
+                        PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+                        PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+                        PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTR063_032DR", 0xE6056004, 32) {
+                        PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+                        PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+                        PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+                        PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+                        PORT47_DATA, PORT46_DATA, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                }
+        },
+        { PINMUX_DATA_REG("PORTR095_064DR", 0xE6056008, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+                        PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+                        PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA,
+                }
+        },
+        { PINMUX_DATA_REG("PORTR191_160DR", 0xE6056014, 32) {
+                        0,            PORT190_DATA, PORT189_DATA, PORT188_DATA,
+                        PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+                        PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+                        PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+                        PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+                        PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+                        PORT167_DATA, 0, 0, 0,
+                        0, 0, 0, 0,
+                }
+        },
+        { PINMUX_DATA_REG("PORTU127_096DR", 0xE605700C, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, PORT120_DATA,
+                        PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+                        PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+                        PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+                        PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+                        PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+                        0, 0, 0, 0,
+                }
+        },
+        { PINMUX_DATA_REG("PORTU159_128DR", 0xE6057010, 32) {
+                        0, 0, 0, 0,
+                        PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                }
+        },
+        { },
+};
+
+static struct pinmux_info sh7372_pinmux_info = {
+        .name = "sh7372_pfc",
+        .reserved_id = PINMUX_RESERVED,
+        .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+        .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+        .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+        .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+        .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+        .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+        .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+        .first_gpio = GPIO_PORT0,
+        .last_gpio = GPIO_FN_SDENC_DV_CLKI,
+
+        .gpios = pinmux_gpios,
+        .cfg_regs = pinmux_config_regs,
+        .data_regs = pinmux_data_regs,
+
+        .gpio_data = pinmux_data,
+        .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7372_pinmux_init(void)
+{
+        register_pinmux(&sh7372_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh7377.c b/arch/arm/mach-shmobile/pfc-sh7377.c
new file mode 100644
index 00000000000..613e6842ad0
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh7377.c
@@ -0,0 +1,1767 @@
+/*
+ * sh7377 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010  NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh7377.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)                               \
+        _1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),       \
+        _1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),       \
+        _1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),       \
+        _1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),       \
+        _1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _90(fn, pfx, sfx)                               \
+        _10(fn, pfx##1, sfx), _10(fn, pfx##2, sfx),     \
+        _10(fn, pfx##3, sfx), _10(fn, pfx##4, sfx),     \
+        _10(fn, pfx##5, sfx), _10(fn, pfx##6, sfx),     \
+        _10(fn, pfx##7, sfx), _10(fn, pfx##8, sfx),     \
+        _10(fn, pfx##9, sfx)
+
+#define _265(fn, pfx, sfx)                              \
+        _10(fn, pfx, sfx), _90(fn, pfx, sfx),           \
+        _10(fn, pfx##10, sfx),                          \
+        _1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),   \
+        _1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),   \
+        _1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),   \
+        _1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),   \
+        _1(fn, pfx##118, sfx),                          \
+        _1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),   \
+        _10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),   \
+        _10(fn, pfx##15, sfx),                          \
+        _1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),   \
+        _1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),   \
+        _1(fn, pfx##164, sfx),                          \
+        _1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),   \
+        _1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),   \
+        _1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),   \
+        _1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),   \
+        _10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),   \
+        _10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),   \
+        _10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),   \
+        _1(fn, pfx##260, sfx), _1(fn, pfx##261, sfx),   \
+        _1(fn, pfx##262, sfx), _1(fn, pfx##263, sfx),   \
+        _1(fn, pfx##264, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_265(str) _265(_PORT, PORT, str)
+
+enum {
+        PINMUX_RESERVED = 0,
+
+        PINMUX_DATA_BEGIN,
+        PORT_265(DATA), /* PORT0_DATA -> PORT264_DATA */
+        PINMUX_DATA_END,
+
+        PINMUX_INPUT_BEGIN,
+        PORT_265(IN), /* PORT0_IN -> PORT264_IN */
+        PINMUX_INPUT_END,
+
+        PINMUX_INPUT_PULLUP_BEGIN,
+        PORT_265(IN_PU), /* PORT0_IN_PU -> PORT264_IN_PU */
+        PINMUX_INPUT_PULLUP_END,
+
+        PINMUX_INPUT_PULLDOWN_BEGIN,
+        PORT_265(IN_PD), /* PORT0_IN_PD -> PORT264_IN_PD */
+        PINMUX_INPUT_PULLDOWN_END,
+
+        PINMUX_OUTPUT_BEGIN,
+        PORT_265(OUT), /* PORT0_OUT -> PORT264_OUT */
+        PINMUX_OUTPUT_END,
+
+        PINMUX_FUNCTION_BEGIN,
+        PORT_265(FN_IN), /* PORT0_FN_IN -> PORT264_FN_IN */
+        PORT_265(FN_OUT), /* PORT0_FN_OUT -> PORT264_FN_OUT */
+        PORT_265(FN0), /* PORT0_FN0 -> PORT264_FN0 */
+        PORT_265(FN1), /* PORT0_FN1 -> PORT264_FN1 */
+        PORT_265(FN2), /* PORT0_FN2 -> PORT264_FN2 */
+        PORT_265(FN3), /* PORT0_FN3 -> PORT264_FN3 */
+        PORT_265(FN4), /* PORT0_FN4 -> PORT264_FN4 */
+        PORT_265(FN5), /* PORT0_FN5 -> PORT264_FN5 */
+        PORT_265(FN6), /* PORT0_FN6 -> PORT264_FN6 */
+        PORT_265(FN7), /* PORT0_FN7 -> PORT264_FN7 */
+
+        MSELBCR_MSEL17_1, MSELBCR_MSEL17_0,
+        MSELBCR_MSEL16_1, MSELBCR_MSEL16_0,
+        PINMUX_FUNCTION_END,
+
+        PINMUX_MARK_BEGIN,
+        /* Special Pull-up / Pull-down Functions */
+        PORT66_KEYIN0_PU_MARK, PORT67_KEYIN1_PU_MARK,
+        PORT68_KEYIN2_PU_MARK, PORT69_KEYIN3_PU_MARK,
+        PORT70_KEYIN4_PU_MARK, PORT71_KEYIN5_PU_MARK,
+        PORT72_KEYIN6_PU_MARK,
+
+        /* 55-1 */
+        VBUS_0_MARK,
+        CPORT0_MARK,
+        CPORT1_MARK,
+        CPORT2_MARK,
+        CPORT3_MARK,
+        CPORT4_MARK,
+        CPORT5_MARK,
+        CPORT6_MARK,
+        CPORT7_MARK,
+        CPORT8_MARK,
+        CPORT9_MARK,
+        CPORT10_MARK,
+        CPORT11_MARK, SIN2_MARK,
+        CPORT12_MARK, XCTS2_MARK,
+        CPORT13_MARK, RFSPO4_MARK,
+        CPORT14_MARK, RFSPO5_MARK,
+        CPORT15_MARK, SCIFA0_SCK_MARK, GPS_AGC2_MARK,
+        CPORT16_MARK, SCIFA0_TXD_MARK, GPS_AGC3_MARK,
+        CPORT17_IC_OE_MARK, SOUT2_MARK,
+        CPORT18_MARK, XRTS2_MARK, PORT19_VIO_CKO2_MARK,
+        CPORT19_MPORT1_MARK,
+        CPORT20_MARK, RFSPO6_MARK,
+        CPORT21_MARK, STATUS0_MARK,
+        CPORT22_MARK, STATUS1_MARK,
+        CPORT23_MARK, STATUS2_MARK, RFSPO7_MARK,
+        B_SYNLD1_MARK,
+        B_SYNLD2_MARK, SYSENMSK_MARK,
+        XMAINPS_MARK,
+        XDIVPS_MARK,
+        XIDRST_MARK,
+        IDCLK_MARK, IC_DP_MARK,
+        IDIO_MARK, IC_DM_MARK,
+        SOUT1_MARK, SCIFA4_TXD_MARK, M02_BERDAT_MARK,
+        SIN1_MARK, SCIFA4_RXD_MARK, XWUP_MARK,
+        XRTS1_MARK, SCIFA4_RTS_MARK, M03_BERCLK_MARK,
+        XCTS1_MARK, SCIFA4_CTS_MARK,
+        PCMCLKO_MARK,
+        SYNC8KO_MARK,
+
+        /* 55-2 */
+        DNPCM_A_MARK,
+        UPPCM_A_MARK,
+        VACK_MARK,
+        XTALB1L_MARK,
+        GPS_AGC1_MARK, SCIFA0_RTS_MARK,
+        GPS_AGC4_MARK, SCIFA0_RXD_MARK,
+        GPS_PWRDOWN_MARK, SCIFA0_CTS_MARK,
+        GPS_IM_MARK,
+        GPS_IS_MARK,
+        GPS_QM_MARK,
+        GPS_QS_MARK,
+        FMSOCK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK,
+        FMSOOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, IPORT3_MARK,
+        FMSIOLR_MARK,
+        FMSOOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, OPORT1_MARK,
+        FMSIOBT_MARK,
+        FMSOSLD_MARK, BBIF2_TXD2_MARK, OPORT2_MARK,
+        FMSOILR_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, OPORT3_MARK,
+        FMSIILR_MARK,
+        FMSOIBT_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FMSIIBT_MARK,
+        FMSISLD_MARK, MFG0_OUT1_MARK, TPU0TO0_MARK,
+        A0_EA0_MARK, BS_MARK,
+        A12_EA12_MARK, PORT58_VIO_CKOR_MARK, TPU4TO2_MARK,
+        A13_EA13_MARK, PORT59_IROUT_MARK, MFG0_OUT2_MARK, TPU0TO1_MARK,
+        A14_EA14_MARK, PORT60_KEYOUT5_MARK,
+        A15_EA15_MARK, PORT61_KEYOUT4_MARK,
+        A16_EA16_MARK, PORT62_KEYOUT3_MARK, MSIOF0_SS1_MARK,
+        A17_EA17_MARK, PORT63_KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+        A18_EA18_MARK, PORT64_KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+        A19_EA19_MARK, PORT65_KEYOUT0_MARK, MSIOF0_TXD_MARK,
+        A20_EA20_MARK, PORT66_KEYIN0_MARK, MSIOF0_RSCK_MARK,
+        A21_EA21_MARK, PORT67_KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+        A22_EA22_MARK, PORT68_KEYIN2_MARK, MSIOF0_MCK0_MARK,
+        A23_EA23_MARK, PORT69_KEYIN3_MARK, MSIOF0_MCK1_MARK,
+        A24_EA24_MARK, PORT70_KEYIN4_MARK, MSIOF0_RXD_MARK,
+        A25_EA25_MARK, PORT71_KEYIN5_MARK, MSIOF0_SS2_MARK,
+        A26_MARK, PORT72_KEYIN6_MARK,
+        D0_ED0_NAF0_MARK,
+        D1_ED1_NAF1_MARK,
+        D2_ED2_NAF2_MARK,
+        D3_ED3_NAF3_MARK,
+        D4_ED4_NAF4_MARK,
+        D5_ED5_NAF5_MARK,
+        D6_ED6_NAF6_MARK,
+        D7_ED7_NAF7_MARK,
+        D8_ED8_NAF8_MARK,
+        D9_ED9_NAF9_MARK,
+        D10_ED10_NAF10_MARK,
+        D11_ED11_NAF11_MARK,
+        D12_ED12_NAF12_MARK,
+        D13_ED13_NAF13_MARK,
+        D14_ED14_NAF14_MARK,
+        D15_ED15_NAF15_MARK,
+        CS4_MARK,
+        CS5A_MARK, FMSICK_MARK,
+        CS5B_MARK, FCE1_MARK,
+
+        /* 55-3 */
+        CS6B_MARK, XCS2_MARK, CS6A_MARK, DACK0_MARK,
+        FCE0_MARK,
+        WAIT_MARK, DREQ0_MARK,
+        RD_XRD_MARK,
+        WE0_XWR0_FWE_MARK,
+        WE1_XWR1_MARK,
+        FRB_MARK,
+        CKO_MARK,
+        NBRSTOUT_MARK,
+        NBRST_MARK,
+        GPS_EPPSIN_MARK,
+        LATCHPULSE_MARK,
+        LTESIGNAL_MARK,
+        LEGACYSTATE_MARK,
+        TCKON_MARK,
+        VIO_VD_MARK, PORT128_KEYOUT0_MARK, IPORT0_MARK,
+        VIO_HD_MARK, PORT129_KEYOUT1_MARK, IPORT1_MARK,
+        VIO_D0_MARK, PORT130_KEYOUT2_MARK, PORT130_MSIOF2_RXD_MARK,
+        VIO_D1_MARK, PORT131_KEYOUT3_MARK, PORT131_MSIOF2_SS1_MARK,
+        VIO_D2_MARK, PORT132_KEYOUT4_MARK, PORT132_MSIOF2_SS2_MARK,
+        VIO_D3_MARK, PORT133_KEYOUT5_MARK, PORT133_MSIOF2_TSYNC_MARK,
+        VIO_D4_MARK, PORT134_KEYIN0_MARK, PORT134_MSIOF2_TXD_MARK,
+        VIO_D5_MARK, PORT135_KEYIN1_MARK, PORT135_MSIOF2_TSCK_MARK,
+        VIO_D6_MARK, PORT136_KEYIN2_MARK,
+        VIO_D7_MARK, PORT137_KEYIN3_MARK,
+        VIO_D8_MARK, M9_SLCD_A01_MARK, PORT138_FSIAOMC_MARK,
+        VIO_D9_MARK, M10_SLCD_CK1_MARK, PORT139_FSIAOLR_MARK,
+        VIO_D10_MARK, M11_SLCD_SO1_MARK, TPU0TO2_MARK, PORT140_FSIAOBT_MARK,
+        VIO_D11_MARK, M12_SLCD_CE1_MARK, TPU0TO3_MARK, PORT141_FSIAOSLD_MARK,
+        VIO_D12_MARK, M13_BSW_MARK, PORT142_FSIACK_MARK,
+        VIO_D13_MARK, M14_GSW_MARK, PORT143_FSIAILR_MARK,
+        VIO_D14_MARK, M15_RSW_MARK, PORT144_FSIAIBT_MARK,
+        VIO_D15_MARK, TPU1TO3_MARK, PORT145_FSIAISLD_MARK,
+        VIO_CLK_MARK, PORT146_KEYIN4_MARK, IPORT2_MARK,
+        VIO_FIELD_MARK, PORT147_KEYIN5_MARK,
+        VIO_CKO_MARK, PORT148_KEYIN6_MARK,
+        A27_MARK, RDWR_XWE_MARK, MFG0_IN1_MARK,
+        MFG0_IN2_MARK,
+        TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+        TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+        TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+        SOUT3_MARK, SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+        SIN3_MARK, SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+        XRTS3_MARK, SCIFA2_RTS1_MARK, PORT156_MSIOF2_SS2_MARK,
+        XCTS3_MARK, SCIFA2_CTS1_MARK, PORT157_MSIOF2_RXD_MARK,
+
+        /* 55-4 */
+        DINT_MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+        PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+        PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK, SOUT0_MARK,
+        PORT161_SCIFB_CTS_MARK, PORT161_SCIFA5_CTS_MARK, XCTS0_MARK,
+        MFG3_IN2_MARK,
+        PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK, SIN0_MARK,
+        MFG3_IN1_MARK,
+        PORT163_SCIFB_RTS_MARK, PORT163_SCIFA5_RTS_MARK, XRTS0_MARK,
+        MFG3_OUT1_MARK, TPU3TO0_MARK,
+        LCDD0_MARK, PORT192_KEYOUT0_MARK, EXT_CKI_MARK,
+        LCDD1_MARK, PORT193_KEYOUT1_MARK, PORT193_SCIFA5_CTS_MARK,
+        BBIF2_TSYNC1_MARK,
+        LCDD2_MARK, PORT194_KEYOUT2_MARK, PORT194_SCIFA5_RTS_MARK,
+        BBIF2_TSCK1_MARK,
+        LCDD3_MARK, PORT195_KEYOUT3_MARK, PORT195_SCIFA5_RXD_MARK,
+        BBIF2_TXD1_MARK,
+        LCDD4_MARK, PORT196_KEYOUT4_MARK, PORT196_SCIFA5_TXD_MARK,
+        LCDD5_MARK, PORT197_KEYOUT5_MARK, PORT197_SCIFA5_SCK_MARK,
+        MFG2_OUT2_MARK,
+        TPU2TO1_MARK,
+        LCDD6_MARK, XWR2_MARK,
+        LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK, XWR3_MARK,
+        LCDD8_MARK, PORT200_KEYIN0_MARK, VIO_DR0_MARK, D16_MARK, ED16_MARK,
+        LCDD9_MARK, PORT201_KEYIN1_MARK, VIO_DR1_MARK, D17_MARK, ED17_MARK,
+        LCDD10_MARK, PORT202_KEYIN2_MARK, VIO_DR2_MARK, D18_MARK, ED18_MARK,
+        LCDD11_MARK, PORT203_KEYIN3_MARK, VIO_DR3_MARK, D19_MARK, ED19_MARK,
+        LCDD12_MARK, PORT204_KEYIN4_MARK, VIO_DR4_MARK, D20_MARK, ED20_MARK,
+        LCDD13_MARK, PORT205_KEYIN5_MARK, VIO_DR5_MARK, D21_MARK, ED21_MARK,
+        LCDD14_MARK, PORT206_KEYIN6_MARK, VIO_DR6_MARK, D22_MARK, ED22_MARK,
+        LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, PORT207_KEYOUT0_MARK,
+        VIO_DR7_MARK, D23_MARK, ED23_MARK,
+        LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, PORT208_KEYOUT1_MARK,
+        VIO_VDR_MARK, D24_MARK, ED24_MARK,
+        LCDD17_MARK, PORT209_KEYOUT2_MARK, VIO_HDR_MARK, D25_MARK, ED25_MARK,
+        LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK, ED26_MARK,
+        LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK, ED27_MARK,
+        LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK, ED28_MARK,
+        LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK, ED29_MARK,
+        LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK, ED30_MARK,
+        LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK, ED31_MARK,
+        LCDDCK_MARK, LCDWR_MARK, PORT216_KEYOUT3_MARK, VIO_CLKR_MARK,
+        LCDRD_MARK, DACK2_MARK, MSIOF0L_TSYNC_MARK,
+        LCDHSYN_MARK, LCDCS_MARK, LCDCS2_MARK, DACK3_MARK,
+        PORT218_VIO_CKOR_MARK, PORT218_KEYOUT4_MARK,
+        LCDDISP_MARK, LCDRS_MARK, DREQ3_MARK, MSIOF0L_TSCK_MARK,
+        LCDVSYN_MARK, LCDVSYN2_MARK, PORT220_KEYOUT5_MARK,
+        LCDLCLK_MARK, DREQ1_MARK, PWEN_MARK, MSIOF0L_RXD_MARK,
+        LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK,
+        SCIFA1_TXD_MARK, OVCN2_MARK,
+        EXTLP_MARK, SCIFA1_SCK_MARK, USBTERM_MARK, PORT226_VIO_CKO2_MARK,
+        SCIFA1_RTS_MARK, IDIN_MARK,
+        SCIFA1_RXD_MARK,
+        SCIFA1_CTS_MARK, MFG1_IN1_MARK,
+        MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK, PORT230_FSIAOMC_MARK,
+        MSIOF1_TSYNC_MARK, SCIFA2_CTS2_MARK, PORT231_FSIAOLR_MARK,
+        MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK, PORT232_FSIAOBT_MARK,
+        MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK, GPS_VCOTRIG_MARK,
+        PORT233_FSIACK_MARK,
+        MSIOF1_RSCK_MARK, SCIFA2_RTS2_MARK, PORT234_FSIAOSLD_MARK,
+        MSIOF1_RSYNC_MARK, OPORT0_MARK, MFG1_IN2_MARK, PORT235_FSIAILR_MARK,
+        MSIOF1_MCK0_MARK, I2C_SDA2_MARK, PORT236_FSIAIBT_MARK,
+        MSIOF1_MCK1_MARK, I2C_SCL2_MARK, PORT237_FSIAISLD_MARK,
+        MSIOF1_SS1_MARK, EDBGREQ3_MARK,
+
+        /* 55-5 */
+        MSIOF1_SS2_MARK,
+        SCIFA6_TXD_MARK,
+        PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK,
+        TPU4TO0_MARK,
+        PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+        PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+        PORT244_SCIFA5_CTS_MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS_MARK,
+        PORT244_MSIOF2_RXD_MARK,
+        PORT245_SCIFA5_RTS_MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS_MARK,
+        PORT245_MSIOF2_TXD_MARK,
+        PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK,
+        TPU1TO0_MARK,
+        PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK,
+        TPU3TO1_MARK,
+        PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK,
+        TPU2TO0_MARK,
+        PORT248_MSIOF2_TSCK_MARK,
+        PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_MSIOF2_TSYNC_MARK,
+        SDHICLK0_MARK, TCK2_SWCLK_MC0_MARK,
+        SDHICD0_MARK,
+        SDHID0_0_MARK, TMS2_SWDIO_MC0_MARK,
+        SDHID0_1_MARK, TDO2_SWO0_MC0_MARK,
+        SDHID0_2_MARK, TDI2_MARK,
+        SDHID0_3_MARK, RTCK2_SWO1_MC0_MARK,
+        SDHICMD0_MARK, TRST2_MARK,
+        SDHIWP0_MARK, EDBGREQ2_MARK,
+        SDHICLK1_MARK, TCK3_SWCLK_MC1_MARK,
+        SDHID1_0_MARK, M11_SLCD_SO2_MARK, TS_SPSYNC2_MARK,
+        TMS3_SWDIO_MC1_MARK,
+        SDHID1_1_MARK, M9_SLCD_A02_MARK, TS_SDAT2_MARK, TDO3_SWO0_MC1_MARK,
+        SDHID1_2_MARK, M10_SLCD_CK2_MARK, TS_SDEN2_MARK, TDI3_MARK,
+        SDHID1_3_MARK, M12_SLCD_CE2_MARK, TS_SCK2_MARK, RTCK3_SWO1_MC1_MARK,
+        SDHICMD1_MARK, TRST3_MARK,
+        RESETOUTS_MARK,
+        PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)      \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)      \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)   \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_IN, PORT##nr##_IN_PD,        \
+                                PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr) \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)        \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)     \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_OUT, PORT##nr##_IN,          \
+                                PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)     \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_OUT, PORT##nr##_IN,          \
+                                PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)  \
+        PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,    \
+                                PORT##nr##_OUT, PORT##nr##_IN,          \
+                                PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+        /* specify valid pin states for each pin in GPIO mode */
+        /* 55-1 (GPIO) */
+        PORT_DATA_I_PD(0), PORT_DATA_I_PU(1),
+        PORT_DATA_I_PU(2), PORT_DATA_I_PU(3),
+        PORT_DATA_I_PU(4), PORT_DATA_I_PU(5),
+        PORT_DATA_I_PU(6), PORT_DATA_I_PU(7),
+        PORT_DATA_I_PU(8), PORT_DATA_I_PU(9),
+        PORT_DATA_I_PU(10), PORT_DATA_I_PU(11),
+        PORT_DATA_IO_PU(12), PORT_DATA_IO_PU(13),
+        PORT_DATA_IO_PU_PD(14), PORT_DATA_IO_PU_PD(15),
+        PORT_DATA_O(16), PORT_DATA_IO(17),
+        PORT_DATA_O(18), PORT_DATA_O(19),
+        PORT_DATA_O(20), PORT_DATA_O(21),
+        PORT_DATA_O(22), PORT_DATA_O(23),
+        PORT_DATA_O(24), PORT_DATA_I_PD(25),
+        PORT_DATA_I_PD(26), PORT_DATA_O(27),
+        PORT_DATA_O(28), PORT_DATA_O(29),
+        PORT_DATA_IO(30), PORT_DATA_IO_PU(31),
+        PORT_DATA_IO_PD(32), PORT_DATA_I_PU(33),
+        PORT_DATA_IO_PD(34), PORT_DATA_I_PU_PD(35),
+        PORT_DATA_O(36), PORT_DATA_IO(37),
+
+        /* 55-2 (GPIO) */
+        PORT_DATA_O(38), PORT_DATA_I_PU(39),
+        PORT_DATA_I_PU_PD(40), PORT_DATA_O(41),
+        PORT_DATA_IO_PD(42), PORT_DATA_IO_PD(43),
+        PORT_DATA_IO_PD(44), PORT_DATA_I_PD(45),
+        PORT_DATA_I_PD(46), PORT_DATA_I_PD(47),
+        PORT_DATA_I_PD(48), PORT_DATA_IO_PU_PD(49),
+        PORT_DATA_IO_PD(50), PORT_DATA_IO_PD(51),
+        PORT_DATA_O(52), PORT_DATA_IO_PU_PD(53),
+        PORT_DATA_IO_PU_PD(54), PORT_DATA_IO_PD(55),
+        PORT_DATA_I_PU_PD(56), PORT_DATA_IO(57),
+        PORT_DATA_IO(58), PORT_DATA_IO(59),
+        PORT_DATA_IO(60), PORT_DATA_IO(61),
+        PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+        PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+        PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+        PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+        PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+        PORT_DATA_IO_PU_PD(72), PORT_DATA_I_PU_PD(73),
+        PORT_DATA_IO_PU(74), PORT_DATA_IO_PU(75),
+        PORT_DATA_IO_PU(76), PORT_DATA_IO_PU(77),
+        PORT_DATA_IO_PU(78), PORT_DATA_IO_PU(79),
+        PORT_DATA_IO_PU(80), PORT_DATA_IO_PU(81),
+        PORT_DATA_IO_PU(82), PORT_DATA_IO_PU(83),
+        PORT_DATA_IO_PU(84), PORT_DATA_IO_PU(85),
+        PORT_DATA_IO_PU(86), PORT_DATA_IO_PU(87),
+        PORT_DATA_IO_PU(88), PORT_DATA_IO_PU(89),
+        PORT_DATA_O(90), PORT_DATA_IO_PU(91),
+        PORT_DATA_O(92),
+
+        /* 55-3 (GPIO) */
+        PORT_DATA_IO_PU(93),
+        PORT_DATA_O(94),
+        PORT_DATA_I_PU_PD(95),
+        PORT_DATA_IO(96), PORT_DATA_IO(97),
+        PORT_DATA_IO(98), PORT_DATA_I_PU(99),
+        PORT_DATA_O(100), PORT_DATA_O(101),
+        PORT_DATA_I_PU(102), PORT_DATA_IO_PD(103),
+        PORT_DATA_I_PD(104), PORT_DATA_I_PD(105),
+        PORT_DATA_I_PD(106), PORT_DATA_I_PD(107),
+        PORT_DATA_I_PD(108), PORT_DATA_IO_PD(109),
+        PORT_DATA_IO_PD(110), PORT_DATA_I_PD(111),
+        PORT_DATA_IO_PD(112), PORT_DATA_IO_PD(113),
+        PORT_DATA_IO_PD(114), PORT_DATA_I_PD(115),
+        PORT_DATA_I_PD(116), PORT_DATA_IO_PD(117),
+        PORT_DATA_I_PD(118), PORT_DATA_IO_PD(128),
+        PORT_DATA_IO_PD(129), PORT_DATA_IO_PD(130),
+        PORT_DATA_IO_PD(131), PORT_DATA_IO_PD(132),
+        PORT_DATA_IO_PD(133), PORT_DATA_IO_PU_PD(134),
+        PORT_DATA_IO_PU_PD(135), PORT_DATA_IO_PU_PD(136),
+        PORT_DATA_IO_PU_PD(137), PORT_DATA_IO_PD(138),
+        PORT_DATA_IO_PD(139), PORT_DATA_IO_PD(140),
+        PORT_DATA_IO_PD(141), PORT_DATA_IO_PD(142),
+        PORT_DATA_IO_PD(143), PORT_DATA_IO_PU_PD(144),
+        PORT_DATA_IO_PD(145), PORT_DATA_IO_PU_PD(146),
+        PORT_DATA_IO_PU_PD(147), PORT_DATA_IO_PU_PD(148),
+        PORT_DATA_IO_PU_PD(149), PORT_DATA_I_PD(150),
+        PORT_DATA_IO_PU_PD(151), PORT_DATA_IO_PD(152),
+        PORT_DATA_IO_PD(153), PORT_DATA_IO_PD(154),
+        PORT_DATA_I_PD(155), PORT_DATA_IO_PU_PD(156),
+        PORT_DATA_I_PD(157), PORT_DATA_IO_PD(158),
+
+        /* 55-4 (GPIO) */
+        PORT_DATA_IO_PU_PD(159), PORT_DATA_IO_PU_PD(160),
+        PORT_DATA_I_PU_PD(161), PORT_DATA_I_PU_PD(162),
+        PORT_DATA_IO_PU_PD(163), PORT_DATA_I_PU_PD(164),
+        PORT_DATA_IO_PD(192), PORT_DATA_IO_PD(193),
+        PORT_DATA_IO_PD(194), PORT_DATA_IO_PD(195),
+        PORT_DATA_IO_PD(196), PORT_DATA_IO_PD(197),
+        PORT_DATA_IO_PD(198), PORT_DATA_IO_PD(199),
+        PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU_PD(201),
+        PORT_DATA_IO_PU_PD(202), PORT_DATA_IO_PU_PD(203),
+        PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+        PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PD(207),
+        PORT_DATA_IO_PD(208), PORT_DATA_IO_PD(209),
+        PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+        PORT_DATA_IO_PD(212), PORT_DATA_IO_PD(213),
+        PORT_DATA_IO_PD(214), PORT_DATA_IO_PD(215),
+        PORT_DATA_IO_PD(216), PORT_DATA_IO_PD(217),
+        PORT_DATA_O(218), PORT_DATA_IO_PD(219),
+        PORT_DATA_IO_PD(220), PORT_DATA_IO_PD(221),
+        PORT_DATA_IO_PU_PD(222),
+        PORT_DATA_I_PU_PD(223), PORT_DATA_I_PU_PD(224),
+        PORT_DATA_IO_PU_PD(225), PORT_DATA_O(226),
+        PORT_DATA_IO_PU_PD(227), PORT_DATA_I_PD(228),
+        PORT_DATA_I_PD(229), PORT_DATA_IO(230),
+        PORT_DATA_IO_PD(231), PORT_DATA_IO_PU_PD(232),
+        PORT_DATA_I_PD(233), PORT_DATA_IO_PU_PD(234),
+        PORT_DATA_IO_PU_PD(235), PORT_DATA_IO_PU_PD(236),
+        PORT_DATA_IO_PD(237), PORT_DATA_IO_PU_PD(238),
+
+        /* 55-5 (GPIO) */
+        PORT_DATA_IO_PU_PD(239), PORT_DATA_IO_PU_PD(240),
+        PORT_DATA_O(241), PORT_DATA_I_PD(242),
+        PORT_DATA_IO_PU_PD(243), PORT_DATA_IO_PU_PD(244),
+        PORT_DATA_IO_PU_PD(245), PORT_DATA_IO_PU_PD(246),
+        PORT_DATA_IO_PU_PD(247), PORT_DATA_IO_PU_PD(248),
+        PORT_DATA_IO_PU_PD(249), PORT_DATA_IO_PD(250),
+        PORT_DATA_IO_PU_PD(251), PORT_DATA_IO_PU_PD(252),
+        PORT_DATA_IO_PU_PD(253), PORT_DATA_IO_PU_PD(254),
+        PORT_DATA_IO_PU_PD(255), PORT_DATA_IO_PU_PD(256),
+        PORT_DATA_IO_PU_PD(257), PORT_DATA_IO_PD(258),
+        PORT_DATA_IO_PU_PD(259), PORT_DATA_IO_PU_PD(260),
+        PORT_DATA_IO_PU_PD(261), PORT_DATA_IO_PU_PD(262),
+        PORT_DATA_IO_PU_PD(263),
+
+        /* Special Pull-up / Pull-down Functions */
+        PINMUX_DATA(PORT66_KEYIN0_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT66_FN2, PORT66_IN_PU),
+        PINMUX_DATA(PORT67_KEYIN1_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT67_FN2, PORT67_IN_PU),
+        PINMUX_DATA(PORT68_KEYIN2_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT68_FN2, PORT68_IN_PU),
+        PINMUX_DATA(PORT69_KEYIN3_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT69_FN2, PORT69_IN_PU),
+        PINMUX_DATA(PORT70_KEYIN4_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT70_FN2, PORT70_IN_PU),
+        PINMUX_DATA(PORT71_KEYIN5_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT71_FN2, PORT71_IN_PU),
+        PINMUX_DATA(PORT72_KEYIN6_PU_MARK, MSELBCR_MSEL17_0, MSELBCR_MSEL16_0,
+                                PORT72_FN2, PORT72_IN_PU),
+
+
+        /* 55-1 (FN) */
+        PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+        PINMUX_DATA(CPORT0_MARK, PORT1_FN1),
+        PINMUX_DATA(CPORT1_MARK, PORT2_FN1),
+        PINMUX_DATA(CPORT2_MARK, PORT3_FN1),
+        PINMUX_DATA(CPORT3_MARK, PORT4_FN1),
+        PINMUX_DATA(CPORT4_MARK, PORT5_FN1),
+        PINMUX_DATA(CPORT5_MARK, PORT6_FN1),
+        PINMUX_DATA(CPORT6_MARK, PORT7_FN1),
+        PINMUX_DATA(CPORT7_MARK, PORT8_FN1),
+        PINMUX_DATA(CPORT8_MARK, PORT9_FN1),
+        PINMUX_DATA(CPORT9_MARK, PORT10_FN1),
+        PINMUX_DATA(CPORT10_MARK, PORT11_FN1),
+        PINMUX_DATA(CPORT11_MARK, PORT12_FN1),
+        PINMUX_DATA(SIN2_MARK, PORT12_FN2),
+        PINMUX_DATA(CPORT12_MARK, PORT13_FN1),
+        PINMUX_DATA(XCTS2_MARK, PORT13_FN2),
+        PINMUX_DATA(CPORT13_MARK, PORT14_FN1),
+        PINMUX_DATA(RFSPO4_MARK, PORT14_FN2),
+        PINMUX_DATA(CPORT14_MARK, PORT15_FN1),
+        PINMUX_DATA(RFSPO5_MARK, PORT15_FN2),
+        PINMUX_DATA(CPORT15_MARK, PORT16_FN1),
+        PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2),
+        PINMUX_DATA(GPS_AGC2_MARK, PORT16_FN3),
+        PINMUX_DATA(CPORT16_MARK, PORT17_FN1),
+        PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+        PINMUX_DATA(GPS_AGC3_MARK, PORT17_FN3),
+        PINMUX_DATA(CPORT17_IC_OE_MARK, PORT18_FN1),
+        PINMUX_DATA(SOUT2_MARK, PORT18_FN2),
+        PINMUX_DATA(CPORT18_MARK, PORT19_FN1),
+        PINMUX_DATA(XRTS2_MARK, PORT19_FN2),
+        PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+        PINMUX_DATA(CPORT19_MPORT1_MARK, PORT20_FN1),
+        PINMUX_DATA(CPORT20_MARK, PORT21_FN1),
+        PINMUX_DATA(RFSPO6_MARK, PORT21_FN2),
+        PINMUX_DATA(CPORT21_MARK, PORT22_FN1),
+        PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+        PINMUX_DATA(CPORT22_MARK, PORT23_FN1),
+        PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+        PINMUX_DATA(CPORT23_MARK, PORT24_FN1),
+        PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+        PINMUX_DATA(RFSPO7_MARK, PORT24_FN3),
+        PINMUX_DATA(B_SYNLD1_MARK, PORT25_FN1),
+        PINMUX_DATA(B_SYNLD2_MARK, PORT26_FN1),
+        PINMUX_DATA(SYSENMSK_MARK, PORT26_FN2),
+        PINMUX_DATA(XMAINPS_MARK, PORT27_FN1),
+        PINMUX_DATA(XDIVPS_MARK, PORT28_FN1),
+        PINMUX_DATA(XIDRST_MARK, PORT29_FN1),
+        PINMUX_DATA(IDCLK_MARK, PORT30_FN1),
+        PINMUX_DATA(IC_DP_MARK, PORT30_FN2),
+        PINMUX_DATA(IDIO_MARK, PORT31_FN1),
+        PINMUX_DATA(IC_DM_MARK, PORT31_FN2),
+        PINMUX_DATA(SOUT1_MARK, PORT32_FN1),
+        PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+        PINMUX_DATA(M02_BERDAT_MARK, PORT32_FN3),
+        PINMUX_DATA(SIN1_MARK, PORT33_FN1),
+        PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2),
+        PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+        PINMUX_DATA(XRTS1_MARK, PORT34_FN1),
+        PINMUX_DATA(SCIFA4_RTS_MARK, PORT34_FN2),
+        PINMUX_DATA(M03_BERCLK_MARK, PORT34_FN3),
+        PINMUX_DATA(XCTS1_MARK, PORT35_FN1),
+        PINMUX_DATA(SCIFA4_CTS_MARK, PORT35_FN2),
+        PINMUX_DATA(PCMCLKO_MARK, PORT36_FN1),
+        PINMUX_DATA(SYNC8KO_MARK, PORT37_FN1),
+
+        /* 55-2 (FN) */
+        PINMUX_DATA(DNPCM_A_MARK, PORT38_FN1),
+        PINMUX_DATA(UPPCM_A_MARK, PORT39_FN1),
+        PINMUX_DATA(VACK_MARK, PORT40_FN1),
+        PINMUX_DATA(XTALB1L_MARK, PORT41_FN1),
+        PINMUX_DATA(GPS_AGC1_MARK, PORT42_FN1),
+        PINMUX_DATA(SCIFA0_RTS_MARK, PORT42_FN2),
+        PINMUX_DATA(GPS_AGC4_MARK, PORT43_FN1),
+        PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+        PINMUX_DATA(GPS_PWRDOWN_MARK, PORT44_FN1),
+        PINMUX_DATA(SCIFA0_CTS_MARK, PORT44_FN2),
+        PINMUX_DATA(GPS_IM_MARK, PORT45_FN1),
+        PINMUX_DATA(GPS_IS_MARK, PORT46_FN1),
+        PINMUX_DATA(GPS_QM_MARK, PORT47_FN1),
+        PINMUX_DATA(GPS_QS_MARK, PORT48_FN1),
+        PINMUX_DATA(FMSOCK_MARK, PORT49_FN1),
+        PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2),
+        PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN3),
+        PINMUX_DATA(FMSOOLR_MARK, PORT50_FN1),
+        PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2),
+        PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3),
+        PINMUX_DATA(IPORT3_MARK, PORT50_FN4),
+        PINMUX_DATA(FMSIOLR_MARK, PORT50_FN5),
+        PINMUX_DATA(FMSOOBT_MARK, PORT51_FN1),
+        PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2),
+        PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3),
+        PINMUX_DATA(OPORT1_MARK, PORT51_FN4),
+        PINMUX_DATA(FMSIOBT_MARK, PORT51_FN5),
+        PINMUX_DATA(FMSOSLD_MARK, PORT52_FN1),
+        PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+        PINMUX_DATA(OPORT2_MARK, PORT52_FN3),
+        PINMUX_DATA(FMSOILR_MARK, PORT53_FN1),
+        PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2),
+        PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3),
+        PINMUX_DATA(OPORT3_MARK, PORT53_FN4),
+        PINMUX_DATA(FMSIILR_MARK, PORT53_FN5),
+        PINMUX_DATA(FMSOIBT_MARK, PORT54_FN1),
+        PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2),
+        PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3),
+        PINMUX_DATA(FMSIIBT_MARK, PORT54_FN4),
+        PINMUX_DATA(FMSISLD_MARK, PORT55_FN1),
+        PINMUX_DATA(MFG0_OUT1_MARK, PORT55_FN2),
+        PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+        PINMUX_DATA(A0_EA0_MARK, PORT57_FN1),
+        PINMUX_DATA(BS_MARK, PORT57_FN2),
+        PINMUX_DATA(A12_EA12_MARK, PORT58_FN1),
+        PINMUX_DATA(PORT58_VIO_CKOR_MARK, PORT58_FN2),
+        PINMUX_DATA(TPU4TO2_MARK, PORT58_FN3),
+        PINMUX_DATA(A13_EA13_MARK, PORT59_FN1),
+        PINMUX_DATA(PORT59_IROUT_MARK, PORT59_FN2),
+        PINMUX_DATA(MFG0_OUT2_MARK, PORT59_FN3),
+        PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+        PINMUX_DATA(A14_EA14_MARK, PORT60_FN1),
+        PINMUX_DATA(PORT60_KEYOUT5_MARK, PORT60_FN2),
+        PINMUX_DATA(A15_EA15_MARK, PORT61_FN1),
+        PINMUX_DATA(PORT61_KEYOUT4_MARK, PORT61_FN2),
+        PINMUX_DATA(A16_EA16_MARK, PORT62_FN1),
+        PINMUX_DATA(PORT62_KEYOUT3_MARK, PORT62_FN2),
+        PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN3),
+        PINMUX_DATA(A17_EA17_MARK, PORT63_FN1),
+        PINMUX_DATA(PORT63_KEYOUT2_MARK, PORT63_FN2),
+        PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN3),
+        PINMUX_DATA(A18_EA18_MARK, PORT64_FN1),
+        PINMUX_DATA(PORT64_KEYOUT1_MARK, PORT64_FN2),
+        PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN3),
+        PINMUX_DATA(A19_EA19_MARK, PORT65_FN1),
+        PINMUX_DATA(PORT65_KEYOUT0_MARK, PORT65_FN2),
+        PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN3),
+        PINMUX_DATA(A20_EA20_MARK, PORT66_FN1),
+        PINMUX_DATA(PORT66_KEYIN0_MARK, PORT66_FN2),
+        PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN3),
+        PINMUX_DATA(A21_EA21_MARK, PORT67_FN1),
+        PINMUX_DATA(PORT67_KEYIN1_MARK, PORT67_FN2),
+        PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN3),
+        PINMUX_DATA(A22_EA22_MARK, PORT68_FN1),
+        PINMUX_DATA(PORT68_KEYIN2_MARK, PORT68_FN2),
+        PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN3),
+        PINMUX_DATA(A23_EA23_MARK, PORT69_FN1),
+        PINMUX_DATA(PORT69_KEYIN3_MARK, PORT69_FN2),
+        PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN3),
+        PINMUX_DATA(A24_EA24_MARK, PORT70_FN1),
+        PINMUX_DATA(PORT70_KEYIN4_MARK, PORT70_FN2),
+        PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN3),
+        PINMUX_DATA(A25_EA25_MARK, PORT71_FN1),
+        PINMUX_DATA(PORT71_KEYIN5_MARK, PORT71_FN2),
+        PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN3),
+        PINMUX_DATA(A26_MARK, PORT72_FN1),
+        PINMUX_DATA(PORT72_KEYIN6_MARK, PORT72_FN2),
+        PINMUX_DATA(D0_ED0_NAF0_MARK, PORT74_FN1),
+        PINMUX_DATA(D1_ED1_NAF1_MARK, PORT75_FN1),
+        PINMUX_DATA(D2_ED2_NAF2_MARK, PORT76_FN1),
+        PINMUX_DATA(D3_ED3_NAF3_MARK, PORT77_FN1),
+        PINMUX_DATA(D4_ED4_NAF4_MARK, PORT78_FN1),
+        PINMUX_DATA(D5_ED5_NAF5_MARK, PORT79_FN1),
+        PINMUX_DATA(D6_ED6_NAF6_MARK, PORT80_FN1),
+        PINMUX_DATA(D7_ED7_NAF7_MARK, PORT81_FN1),
+        PINMUX_DATA(D8_ED8_NAF8_MARK, PORT82_FN1),
+        PINMUX_DATA(D9_ED9_NAF9_MARK, PORT83_FN1),
+        PINMUX_DATA(D10_ED10_NAF10_MARK, PORT84_FN1),
+        PINMUX_DATA(D11_ED11_NAF11_MARK, PORT85_FN1),
+        PINMUX_DATA(D12_ED12_NAF12_MARK, PORT86_FN1),
+        PINMUX_DATA(D13_ED13_NAF13_MARK, PORT87_FN1),
+        PINMUX_DATA(D14_ED14_NAF14_MARK, PORT88_FN1),
+        PINMUX_DATA(D15_ED15_NAF15_MARK, PORT89_FN1),
+        PINMUX_DATA(CS4_MARK, PORT90_FN1),
+        PINMUX_DATA(CS5A_MARK, PORT91_FN1),
+        PINMUX_DATA(FMSICK_MARK, PORT91_FN2),
+        PINMUX_DATA(CS5B_MARK, PORT92_FN1),
+        PINMUX_DATA(FCE1_MARK, PORT92_FN2),
+
+        /* 55-3 (FN) */
+        PINMUX_DATA(CS6B_MARK, PORT93_FN1),
+        PINMUX_DATA(XCS2_MARK, PORT93_FN2),
+        PINMUX_DATA(CS6A_MARK, PORT93_FN3),
+        PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+        PINMUX_DATA(FCE0_MARK, PORT94_FN1),
+        PINMUX_DATA(WAIT_MARK, PORT95_FN1),
+        PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+        PINMUX_DATA(RD_XRD_MARK, PORT96_FN1),
+        PINMUX_DATA(WE0_XWR0_FWE_MARK, PORT97_FN1),
+        PINMUX_DATA(WE1_XWR1_MARK, PORT98_FN1),
+        PINMUX_DATA(FRB_MARK, PORT99_FN1),
+        PINMUX_DATA(CKO_MARK, PORT100_FN1),
+        PINMUX_DATA(NBRSTOUT_MARK, PORT101_FN1),
+        PINMUX_DATA(NBRST_MARK, PORT102_FN1),
+        PINMUX_DATA(GPS_EPPSIN_MARK, PORT106_FN1),
+        PINMUX_DATA(LATCHPULSE_MARK, PORT110_FN1),
+        PINMUX_DATA(LTESIGNAL_MARK, PORT111_FN1),
+        PINMUX_DATA(LEGACYSTATE_MARK, PORT112_FN1),
+        PINMUX_DATA(TCKON_MARK, PORT118_FN1),
+        PINMUX_DATA(VIO_VD_MARK, PORT128_FN1),
+        PINMUX_DATA(PORT128_KEYOUT0_MARK, PORT128_FN2),
+        PINMUX_DATA(IPORT0_MARK, PORT128_FN3),
+        PINMUX_DATA(VIO_HD_MARK, PORT129_FN1),
+        PINMUX_DATA(PORT129_KEYOUT1_MARK, PORT129_FN2),
+        PINMUX_DATA(IPORT1_MARK, PORT129_FN3),
+        PINMUX_DATA(VIO_D0_MARK, PORT130_FN1),
+        PINMUX_DATA(PORT130_KEYOUT2_MARK, PORT130_FN2),
+        PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3),
+        PINMUX_DATA(VIO_D1_MARK, PORT131_FN1),
+        PINMUX_DATA(PORT131_KEYOUT3_MARK, PORT131_FN2),
+        PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3),
+        PINMUX_DATA(VIO_D2_MARK, PORT132_FN1),
+        PINMUX_DATA(PORT132_KEYOUT4_MARK, PORT132_FN2),
+        PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3),
+        PINMUX_DATA(VIO_D3_MARK, PORT133_FN1),
+        PINMUX_DATA(PORT133_KEYOUT5_MARK, PORT133_FN2),
+        PINMUX_DATA(PORT133_MSIOF2_TSYNC_MARK, PORT133_FN3),
+        PINMUX_DATA(VIO_D4_MARK, PORT134_FN1),
+        PINMUX_DATA(PORT134_KEYIN0_MARK, PORT134_FN2),
+        PINMUX_DATA(PORT134_MSIOF2_TXD_MARK, PORT134_FN3),
+        PINMUX_DATA(VIO_D5_MARK, PORT135_FN1),
+        PINMUX_DATA(PORT135_KEYIN1_MARK, PORT135_FN2),
+        PINMUX_DATA(PORT135_MSIOF2_TSCK_MARK, PORT135_FN3),
+        PINMUX_DATA(VIO_D6_MARK, PORT136_FN1),
+        PINMUX_DATA(PORT136_KEYIN2_MARK, PORT136_FN2),
+        PINMUX_DATA(VIO_D7_MARK, PORT137_FN1),
+        PINMUX_DATA(PORT137_KEYIN3_MARK, PORT137_FN2),
+        PINMUX_DATA(VIO_D8_MARK, PORT138_FN1),
+        PINMUX_DATA(M9_SLCD_A01_MARK, PORT138_FN2),
+        PINMUX_DATA(PORT138_FSIAOMC_MARK, PORT138_FN3),
+        PINMUX_DATA(VIO_D9_MARK, PORT139_FN1),
+        PINMUX_DATA(M10_SLCD_CK1_MARK, PORT139_FN2),
+        PINMUX_DATA(PORT139_FSIAOLR_MARK, PORT139_FN3),
+        PINMUX_DATA(VIO_D10_MARK, PORT140_FN1),
+        PINMUX_DATA(M11_SLCD_SO1_MARK, PORT140_FN2),
+        PINMUX_DATA(TPU0TO2_MARK, PORT140_FN3),
+        PINMUX_DATA(PORT140_FSIAOBT_MARK, PORT140_FN4),
+        PINMUX_DATA(VIO_D11_MARK, PORT141_FN1),
+        PINMUX_DATA(M12_SLCD_CE1_MARK, PORT141_FN2),
+        PINMUX_DATA(TPU0TO3_MARK, PORT141_FN3),
+        PINMUX_DATA(PORT141_FSIAOSLD_MARK, PORT141_FN4),
+        PINMUX_DATA(VIO_D12_MARK, PORT142_FN1),
+        PINMUX_DATA(M13_BSW_MARK, PORT142_FN2),
+        PINMUX_DATA(PORT142_FSIACK_MARK, PORT142_FN3),
+        PINMUX_DATA(VIO_D13_MARK, PORT143_FN1),
+        PINMUX_DATA(M14_GSW_MARK, PORT143_FN2),
+        PINMUX_DATA(PORT143_FSIAILR_MARK, PORT143_FN3),
+        PINMUX_DATA(VIO_D14_MARK, PORT144_FN1),
+        PINMUX_DATA(M15_RSW_MARK, PORT144_FN2),
+        PINMUX_DATA(PORT144_FSIAIBT_MARK, PORT144_FN3),
+        PINMUX_DATA(VIO_D15_MARK, PORT145_FN1),
+        PINMUX_DATA(TPU1TO3_MARK, PORT145_FN2),
+        PINMUX_DATA(PORT145_FSIAISLD_MARK, PORT145_FN3),
+        PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1),
+        PINMUX_DATA(PORT146_KEYIN4_MARK, PORT146_FN2),
+        PINMUX_DATA(IPORT2_MARK, PORT146_FN3),
+        PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1),
+        PINMUX_DATA(PORT147_KEYIN5_MARK, PORT147_FN2),
+        PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+        PINMUX_DATA(PORT148_KEYIN6_MARK, PORT148_FN2),
+        PINMUX_DATA(A27_MARK, PORT149_FN1),
+        PINMUX_DATA(RDWR_XWE_MARK, PORT149_FN2),
+        PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3),
+        PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN1),
+        PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN1),
+        PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN2),
+        PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN1),
+        PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN2),
+        PINMUX_DATA(TPU1TO2_MARK, PORT153_FN1),
+        PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN2),
+        PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN3),
+        PINMUX_DATA(SOUT3_MARK, PORT154_FN1),
+        PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2),
+        PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN3),
+        PINMUX_DATA(SIN3_MARK, PORT155_FN1),
+        PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2),
+        PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN3),
+        PINMUX_DATA(XRTS3_MARK, PORT156_FN1),
+        PINMUX_DATA(SCIFA2_RTS1_MARK, PORT156_FN2),
+        PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN3),
+        PINMUX_DATA(XCTS3_MARK, PORT157_FN1),
+        PINMUX_DATA(SCIFA2_CTS1_MARK, PORT157_FN2),
+        PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN3),
+
+        /* 55-4 (FN) */
+        PINMUX_DATA(DINT_MARK, PORT158_FN1),
+        PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2),
+        PINMUX_DATA(TS_SCK3_MARK, PORT158_FN3),
+        PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1),
+        PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2),
+        PINMUX_DATA(NMI_MARK, PORT159_FN3),
+        PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1),
+        PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2),
+        PINMUX_DATA(SOUT0_MARK, PORT160_FN3),
+        PINMUX_DATA(PORT161_SCIFB_CTS_MARK, PORT161_FN1),
+        PINMUX_DATA(PORT161_SCIFA5_CTS_MARK, PORT161_FN2),
+        PINMUX_DATA(XCTS0_MARK, PORT161_FN3),
+        PINMUX_DATA(MFG3_IN2_MARK, PORT161_FN4),
+        PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1),
+        PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2),
+        PINMUX_DATA(SIN0_MARK, PORT162_FN3),
+        PINMUX_DATA(MFG3_IN1_MARK, PORT162_FN4),
+        PINMUX_DATA(PORT163_SCIFB_RTS_MARK, PORT163_FN1),
+        PINMUX_DATA(PORT163_SCIFA5_RTS_MARK, PORT163_FN2),
+        PINMUX_DATA(XRTS0_MARK, PORT163_FN3),
+        PINMUX_DATA(MFG3_OUT1_MARK, PORT163_FN4),
+        PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+        PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+        PINMUX_DATA(PORT192_KEYOUT0_MARK, PORT192_FN2),
+        PINMUX_DATA(EXT_CKI_MARK, PORT192_FN3),
+        PINMUX_DATA(LCDD1_MARK, PORT193_FN1),
+        PINMUX_DATA(PORT193_KEYOUT1_MARK, PORT193_FN2),
+        PINMUX_DATA(PORT193_SCIFA5_CTS_MARK, PORT193_FN3),
+        PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN4),
+        PINMUX_DATA(LCDD2_MARK, PORT194_FN1),
+        PINMUX_DATA(PORT194_KEYOUT2_MARK, PORT194_FN2),
+        PINMUX_DATA(PORT194_SCIFA5_RTS_MARK, PORT194_FN3),
+        PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN4),
+        PINMUX_DATA(LCDD3_MARK, PORT195_FN1),
+        PINMUX_DATA(PORT195_KEYOUT3_MARK, PORT195_FN2),
+        PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3),
+        PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN4),
+        PINMUX_DATA(LCDD4_MARK, PORT196_FN1),
+        PINMUX_DATA(PORT196_KEYOUT4_MARK, PORT196_FN2),
+        PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3),
+        PINMUX_DATA(LCDD5_MARK, PORT197_FN1),
+        PINMUX_DATA(PORT197_KEYOUT5_MARK, PORT197_FN2),
+        PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3),
+        PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN4),
+        PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+        PINMUX_DATA(LCDD7_MARK, PORT199_FN1),
+        PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2),
+        PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN3),
+        PINMUX_DATA(LCDD8_MARK, PORT200_FN1),
+        PINMUX_DATA(PORT200_KEYIN0_MARK, PORT200_FN2),
+        PINMUX_DATA(VIO_DR0_MARK, PORT200_FN3),
+        PINMUX_DATA(D16_MARK, PORT200_FN4),
+        PINMUX_DATA(LCDD9_MARK, PORT201_FN1),
+        PINMUX_DATA(PORT201_KEYIN1_MARK, PORT201_FN2),
+        PINMUX_DATA(VIO_DR1_MARK, PORT201_FN3),
+        PINMUX_DATA(D17_MARK, PORT201_FN4),
+        PINMUX_DATA(LCDD10_MARK, PORT202_FN1),
+        PINMUX_DATA(PORT202_KEYIN2_MARK, PORT202_FN2),
+        PINMUX_DATA(VIO_DR2_MARK, PORT202_FN3),
+        PINMUX_DATA(D18_MARK, PORT202_FN4),
+        PINMUX_DATA(LCDD11_MARK, PORT203_FN1),
+        PINMUX_DATA(PORT203_KEYIN3_MARK, PORT203_FN2),
+        PINMUX_DATA(VIO_DR3_MARK, PORT203_FN3),
+        PINMUX_DATA(D19_MARK, PORT203_FN4),
+        PINMUX_DATA(LCDD12_MARK, PORT204_FN1),
+        PINMUX_DATA(PORT204_KEYIN4_MARK, PORT204_FN2),
+        PINMUX_DATA(VIO_DR4_MARK, PORT204_FN3),
+        PINMUX_DATA(D20_MARK, PORT204_FN4),
+        PINMUX_DATA(LCDD13_MARK, PORT205_FN1),
+        PINMUX_DATA(PORT205_KEYIN5_MARK, PORT205_FN2),
+        PINMUX_DATA(VIO_DR5_MARK, PORT205_FN3),
+        PINMUX_DATA(D21_MARK, PORT205_FN4),
+        PINMUX_DATA(LCDD14_MARK, PORT206_FN1),
+        PINMUX_DATA(PORT206_KEYIN6_MARK, PORT206_FN2),
+        PINMUX_DATA(VIO_DR6_MARK, PORT206_FN3),
+        PINMUX_DATA(D22_MARK, PORT206_FN4),
+        PINMUX_DATA(LCDD15_MARK, PORT207_FN1),
+        PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2),
+        PINMUX_DATA(PORT207_KEYOUT0_MARK, PORT207_FN3),
+        PINMUX_DATA(VIO_DR7_MARK, PORT207_FN4),
+        PINMUX_DATA(D23_MARK, PORT207_FN5),
+        PINMUX_DATA(LCDD16_MARK, PORT208_FN1),
+        PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2),
+        PINMUX_DATA(PORT208_KEYOUT1_MARK, PORT208_FN3),
+        PINMUX_DATA(VIO_VDR_MARK, PORT208_FN4),
+        PINMUX_DATA(D24_MARK, PORT208_FN5),
+        PINMUX_DATA(LCDD17_MARK, PORT209_FN1),
+        PINMUX_DATA(PORT209_KEYOUT2_MARK, PORT209_FN2),
+        PINMUX_DATA(VIO_HDR_MARK, PORT209_FN3),
+        PINMUX_DATA(D25_MARK, PORT209_FN4),
+        PINMUX_DATA(LCDD18_MARK, PORT210_FN1),
+        PINMUX_DATA(DREQ2_MARK, PORT210_FN2),
+        PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN3),
+        PINMUX_DATA(D26_MARK, PORT210_FN4),
+        PINMUX_DATA(LCDD19_MARK, PORT211_FN1),
+        PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN2),
+        PINMUX_DATA(D27_MARK, PORT211_FN3),
+        PINMUX_DATA(LCDD20_MARK, PORT212_FN1),
+        PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2),
+        PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN3),
+        PINMUX_DATA(D28_MARK, PORT212_FN4),
+        PINMUX_DATA(LCDD21_MARK, PORT213_FN1),
+        PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2),
+        PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN3),
+        PINMUX_DATA(D29_MARK, PORT213_FN4),
+        PINMUX_DATA(LCDD22_MARK, PORT214_FN1),
+        PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2),
+        PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN3),
+        PINMUX_DATA(D30_MARK, PORT214_FN4),
+        PINMUX_DATA(LCDD23_MARK, PORT215_FN1),
+        PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2),
+        PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN3),
+        PINMUX_DATA(D31_MARK, PORT215_FN4),
+        PINMUX_DATA(LCDDCK_MARK, PORT216_FN1),
+        PINMUX_DATA(LCDWR_MARK, PORT216_FN2),
+        PINMUX_DATA(PORT216_KEYOUT3_MARK, PORT216_FN3),
+        PINMUX_DATA(VIO_CLKR_MARK, PORT216_FN4),
+        PINMUX_DATA(LCDRD_MARK, PORT217_FN1),
+        PINMUX_DATA(DACK2_MARK, PORT217_FN2),
+        PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN3),
+        PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1),
+        PINMUX_DATA(LCDCS_MARK, PORT218_FN2),
+        PINMUX_DATA(LCDCS2_MARK, PORT218_FN3),
+        PINMUX_DATA(DACK3_MARK, PORT218_FN4),
+        PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+        PINMUX_DATA(PORT218_KEYOUT4_MARK, PORT218_FN6),
+        PINMUX_DATA(LCDDISP_MARK, PORT219_FN1),
+        PINMUX_DATA(LCDRS_MARK, PORT219_FN2),
+        PINMUX_DATA(DREQ3_MARK, PORT219_FN3),
+        PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN4),
+        PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1),
+        PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+        PINMUX_DATA(PORT220_KEYOUT5_MARK, PORT220_FN3),
+        PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1),
+        PINMUX_DATA(DREQ1_MARK, PORT221_FN2),
+        PINMUX_DATA(PWEN_MARK, PORT221_FN3),
+        PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN4),
+        PINMUX_DATA(LCDDON_MARK, PORT222_FN1),
+        PINMUX_DATA(LCDDON2_MARK, PORT222_FN2),
+        PINMUX_DATA(DACK1_MARK, PORT222_FN3),
+        PINMUX_DATA(OVCN_MARK, PORT222_FN4),
+        PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5),
+        PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN1),
+        PINMUX_DATA(OVCN2_MARK, PORT225_FN2),
+        PINMUX_DATA(EXTLP_MARK, PORT226_FN1),
+        PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2),
+        PINMUX_DATA(USBTERM_MARK, PORT226_FN3),
+        PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN4),
+        PINMUX_DATA(SCIFA1_RTS_MARK, PORT227_FN1),
+        PINMUX_DATA(IDIN_MARK, PORT227_FN2),
+        PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN1),
+        PINMUX_DATA(SCIFA1_CTS_MARK, PORT229_FN1),
+        PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN2),
+        PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1),
+        PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2),
+        PINMUX_DATA(PORT230_FSIAOMC_MARK, PORT230_FN3),
+        PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1),
+        PINMUX_DATA(SCIFA2_CTS2_MARK, PORT231_FN2),
+        PINMUX_DATA(PORT231_FSIAOLR_MARK, PORT231_FN3),
+        PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1),
+        PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2),
+        PINMUX_DATA(PORT232_FSIAOBT_MARK, PORT232_FN3),
+        PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1),
+        PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2),
+        PINMUX_DATA(GPS_VCOTRIG_MARK, PORT233_FN3),
+        PINMUX_DATA(PORT233_FSIACK_MARK, PORT233_FN4),
+        PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1),
+        PINMUX_DATA(SCIFA2_RTS2_MARK, PORT234_FN2),
+        PINMUX_DATA(PORT234_FSIAOSLD_MARK, PORT234_FN3),
+        PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1),
+        PINMUX_DATA(OPORT0_MARK, PORT235_FN2),
+        PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3),
+        PINMUX_DATA(PORT235_FSIAILR_MARK, PORT235_FN4),
+        PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1),
+        PINMUX_DATA(I2C_SDA2_MARK, PORT236_FN2),
+        PINMUX_DATA(PORT236_FSIAIBT_MARK, PORT236_FN3),
+        PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1),
+        PINMUX_DATA(I2C_SCL2_MARK, PORT237_FN2),
+        PINMUX_DATA(PORT237_FSIAISLD_MARK, PORT237_FN3),
+        PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1),
+        PINMUX_DATA(EDBGREQ3_MARK, PORT238_FN2),
+
+        /* 55-5 (FN) */
+        PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1),
+        PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+        PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1),
+        PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2),
+        PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3),
+        PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+        PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1),
+        PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN2),
+        PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1),
+        PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+        PINMUX_DATA(PORT244_SCIFA5_CTS_MARK, PORT244_FN1),
+        PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2),
+        PINMUX_DATA(PORT244_SCIFB_CTS_MARK, PORT244_FN3),
+        PINMUX_DATA(PORT245_SCIFA5_RTS_MARK, PORT245_FN1),
+        PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2),
+        PINMUX_DATA(PORT245_SCIFB_RTS_MARK, PORT245_FN3),
+        PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1),
+        PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2),
+        PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3),
+        PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+        PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1),
+        PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2),
+        PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3),
+        PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+        PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1),
+        PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2),
+        PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3),
+        PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4),
+        PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1),
+        PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2),
+        PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+        PINMUX_DATA(TCK2_SWCLK_MC0_MARK, PORT250_FN2),
+        PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+        PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+        PINMUX_DATA(TMS2_SWDIO_MC0_MARK, PORT252_FN2),
+        PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+        PINMUX_DATA(TDO2_SWO0_MC0_MARK, PORT253_FN2),
+        PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+        PINMUX_DATA(TDI2_MARK, PORT254_FN2),
+        PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+        PINMUX_DATA(RTCK2_SWO1_MC0_MARK, PORT255_FN2),
+        PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+        PINMUX_DATA(TRST2_MARK, PORT256_FN2),
+        PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+        PINMUX_DATA(EDBGREQ2_MARK, PORT257_FN2),
+        PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+        PINMUX_DATA(TCK3_SWCLK_MC1_MARK, PORT258_FN2),
+        PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1),
+        PINMUX_DATA(M11_SLCD_SO2_MARK, PORT259_FN2),
+        PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+        PINMUX_DATA(TMS3_SWDIO_MC1_MARK, PORT259_FN4),
+        PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1),
+        PINMUX_DATA(M9_SLCD_A02_MARK, PORT260_FN2),
+        PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+        PINMUX_DATA(TDO3_SWO0_MC1_MARK, PORT260_FN4),
+        PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1),
+        PINMUX_DATA(M10_SLCD_CK2_MARK, PORT261_FN2),
+        PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+        PINMUX_DATA(TDI3_MARK, PORT261_FN4),
+        PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1),
+        PINMUX_DATA(M12_SLCD_CE2_MARK, PORT262_FN2),
+        PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+        PINMUX_DATA(RTCK3_SWO1_MC1_MARK, PORT262_FN4),
+        PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+        PINMUX_DATA(TRST3_MARK, PORT263_FN2),
+        PINMUX_DATA(RESETOUTS_MARK, PORT264_FN1),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_265() _265(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+        /* 55-1 -> 55-5 (GPIO) */
+        GPIO_PORT_265(),
+
+        /* Special Pull-up / Pull-down Functions */
+        GPIO_FN(PORT66_KEYIN0_PU), GPIO_FN(PORT67_KEYIN1_PU),
+        GPIO_FN(PORT68_KEYIN2_PU), GPIO_FN(PORT69_KEYIN3_PU),
+        GPIO_FN(PORT70_KEYIN4_PU), GPIO_FN(PORT71_KEYIN5_PU),
+        GPIO_FN(PORT72_KEYIN6_PU),
+
+        /* 55-1 (FN) */
+        GPIO_FN(VBUS_0),
+        GPIO_FN(CPORT0),
+        GPIO_FN(CPORT1),
+        GPIO_FN(CPORT2),
+        GPIO_FN(CPORT3),
+        GPIO_FN(CPORT4),
+        GPIO_FN(CPORT5),
+        GPIO_FN(CPORT6),
+        GPIO_FN(CPORT7),
+        GPIO_FN(CPORT8),
+        GPIO_FN(CPORT9),
+        GPIO_FN(CPORT10),
+        GPIO_FN(CPORT11), GPIO_FN(SIN2),
+        GPIO_FN(CPORT12), GPIO_FN(XCTS2),
+        GPIO_FN(CPORT13), GPIO_FN(RFSPO4),
+        GPIO_FN(CPORT14), GPIO_FN(RFSPO5),
+        GPIO_FN(CPORT15), GPIO_FN(SCIFA0_SCK), GPIO_FN(GPS_AGC2),
+        GPIO_FN(CPORT16), GPIO_FN(SCIFA0_TXD), GPIO_FN(GPS_AGC3),
+        GPIO_FN(CPORT17_IC_OE), GPIO_FN(SOUT2),
+        GPIO_FN(CPORT18), GPIO_FN(XRTS2), GPIO_FN(PORT19_VIO_CKO2),
+        GPIO_FN(CPORT19_MPORT1),
+        GPIO_FN(CPORT20), GPIO_FN(RFSPO6),
+        GPIO_FN(CPORT21), GPIO_FN(STATUS0),
+        GPIO_FN(CPORT22), GPIO_FN(STATUS1),
+        GPIO_FN(CPORT23), GPIO_FN(STATUS2), GPIO_FN(RFSPO7),
+        GPIO_FN(B_SYNLD1),
+        GPIO_FN(B_SYNLD2), GPIO_FN(SYSENMSK),
+        GPIO_FN(XMAINPS),
+        GPIO_FN(XDIVPS),
+        GPIO_FN(XIDRST),
+        GPIO_FN(IDCLK), GPIO_FN(IC_DP),
+        GPIO_FN(IDIO), GPIO_FN(IC_DM),
+        GPIO_FN(SOUT1), GPIO_FN(SCIFA4_TXD), GPIO_FN(M02_BERDAT),
+        GPIO_FN(SIN1), GPIO_FN(SCIFA4_RXD), GPIO_FN(XWUP),
+        GPIO_FN(XRTS1), GPIO_FN(SCIFA4_RTS), GPIO_FN(M03_BERCLK),
+        GPIO_FN(XCTS1), GPIO_FN(SCIFA4_CTS),
+        GPIO_FN(PCMCLKO),
+        GPIO_FN(SYNC8KO),
+
+        /* 55-2 (FN) */
+        GPIO_FN(DNPCM_A),
+        GPIO_FN(UPPCM_A),
+        GPIO_FN(VACK),
+        GPIO_FN(XTALB1L),
+        GPIO_FN(GPS_AGC1), GPIO_FN(SCIFA0_RTS),
+        GPIO_FN(GPS_AGC4), GPIO_FN(SCIFA0_RXD),
+        GPIO_FN(GPS_PWRDOWN), GPIO_FN(SCIFA0_CTS),
+        GPIO_FN(GPS_IM),
+        GPIO_FN(GPS_IS),
+        GPIO_FN(GPS_QM),
+        GPIO_FN(GPS_QS),
+        GPIO_FN(FMSOCK), GPIO_FN(PORT49_IRDA_OUT), GPIO_FN(PORT49_IROUT),
+        GPIO_FN(FMSOOLR), GPIO_FN(BBIF2_TSYNC2), GPIO_FN(TPU2TO2),
+        GPIO_FN(IPORT3), GPIO_FN(FMSIOLR),
+        GPIO_FN(FMSOOBT), GPIO_FN(BBIF2_TSCK2), GPIO_FN(TPU2TO3),
+        GPIO_FN(OPORT1), GPIO_FN(FMSIOBT),
+        GPIO_FN(FMSOSLD), GPIO_FN(BBIF2_TXD2), GPIO_FN(OPORT2),
+        GPIO_FN(FMSOILR), GPIO_FN(PORT53_IRDA_IN), GPIO_FN(TPU3TO3),
+        GPIO_FN(OPORT3), GPIO_FN(FMSIILR),
+        GPIO_FN(FMSOIBT), GPIO_FN(PORT54_IRDA_FIRSEL), GPIO_FN(TPU3TO2),
+        GPIO_FN(FMSIIBT),
+        GPIO_FN(FMSISLD), GPIO_FN(MFG0_OUT1), GPIO_FN(TPU0TO0),
+        GPIO_FN(A0_EA0), GPIO_FN(BS),
+        GPIO_FN(A12_EA12), GPIO_FN(PORT58_VIO_CKOR), GPIO_FN(TPU4TO2),
+        GPIO_FN(A13_EA13), GPIO_FN(PORT59_IROUT), GPIO_FN(MFG0_OUT2),
+        GPIO_FN(TPU0TO1),
+        GPIO_FN(A14_EA14), GPIO_FN(PORT60_KEYOUT5),
+        GPIO_FN(A15_EA15), GPIO_FN(PORT61_KEYOUT4),
+        GPIO_FN(A16_EA16), GPIO_FN(PORT62_KEYOUT3), GPIO_FN(MSIOF0_SS1),
+        GPIO_FN(A17_EA17), GPIO_FN(PORT63_KEYOUT2), GPIO_FN(MSIOF0_TSYNC),
+        GPIO_FN(A18_EA18), GPIO_FN(PORT64_KEYOUT1), GPIO_FN(MSIOF0_TSCK),
+        GPIO_FN(A19_EA19), GPIO_FN(PORT65_KEYOUT0), GPIO_FN(MSIOF0_TXD),
+        GPIO_FN(A20_EA20), GPIO_FN(PORT66_KEYIN0), GPIO_FN(MSIOF0_RSCK),
+        GPIO_FN(A21_EA21), GPIO_FN(PORT67_KEYIN1), GPIO_FN(MSIOF0_RSYNC),
+        GPIO_FN(A22_EA22), GPIO_FN(PORT68_KEYIN2), GPIO_FN(MSIOF0_MCK0),
+        GPIO_FN(A23_EA23), GPIO_FN(PORT69_KEYIN3), GPIO_FN(MSIOF0_MCK1),
+        GPIO_FN(A24_EA24), GPIO_FN(PORT70_KEYIN4), GPIO_FN(MSIOF0_RXD),
+        GPIO_FN(A25_EA25), GPIO_FN(PORT71_KEYIN5), GPIO_FN(MSIOF0_SS2),
+        GPIO_FN(A26), GPIO_FN(PORT72_KEYIN6),
+        GPIO_FN(D0_ED0_NAF0),
+        GPIO_FN(D1_ED1_NAF1),
+        GPIO_FN(D2_ED2_NAF2),
+        GPIO_FN(D3_ED3_NAF3),
+        GPIO_FN(D4_ED4_NAF4),
+        GPIO_FN(D5_ED5_NAF5),
+        GPIO_FN(D6_ED6_NAF6),
+        GPIO_FN(D7_ED7_NAF7),
+        GPIO_FN(D8_ED8_NAF8),
+        GPIO_FN(D9_ED9_NAF9),
+        GPIO_FN(D10_ED10_NAF10),
+        GPIO_FN(D11_ED11_NAF11),
+        GPIO_FN(D12_ED12_NAF12),
+        GPIO_FN(D13_ED13_NAF13),
+        GPIO_FN(D14_ED14_NAF14),
+        GPIO_FN(D15_ED15_NAF15),
+        GPIO_FN(CS4),
+        GPIO_FN(CS5A), GPIO_FN(FMSICK),
+
+        /* 55-3 (FN) */
+        GPIO_FN(CS5B), GPIO_FN(FCE1),
+        GPIO_FN(CS6B), GPIO_FN(XCS2), GPIO_FN(CS6A), GPIO_FN(DACK0),
+        GPIO_FN(FCE0),
+        GPIO_FN(WAIT), GPIO_FN(DREQ0),
+        GPIO_FN(RD_XRD),
+        GPIO_FN(WE0_XWR0_FWE),
+        GPIO_FN(WE1_XWR1),
+        GPIO_FN(FRB),
+        GPIO_FN(CKO),
+        GPIO_FN(NBRSTOUT),
+        GPIO_FN(NBRST),
+        GPIO_FN(GPS_EPPSIN),
+        GPIO_FN(LATCHPULSE),
+        GPIO_FN(LTESIGNAL),
+        GPIO_FN(LEGACYSTATE),
+        GPIO_FN(TCKON),
+        GPIO_FN(VIO_VD), GPIO_FN(PORT128_KEYOUT0), GPIO_FN(IPORT0),
+        GPIO_FN(VIO_HD), GPIO_FN(PORT129_KEYOUT1), GPIO_FN(IPORT1),
+        GPIO_FN(VIO_D0), GPIO_FN(PORT130_KEYOUT2), GPIO_FN(PORT130_MSIOF2_RXD),
+        GPIO_FN(VIO_D1), GPIO_FN(PORT131_KEYOUT3), GPIO_FN(PORT131_MSIOF2_SS1),
+        GPIO_FN(VIO_D2), GPIO_FN(PORT132_KEYOUT4), GPIO_FN(PORT132_MSIOF2_SS2),
+        GPIO_FN(VIO_D3), GPIO_FN(PORT133_KEYOUT5),
+        GPIO_FN(PORT133_MSIOF2_TSYNC),
+        GPIO_FN(VIO_D4), GPIO_FN(PORT134_KEYIN0), GPIO_FN(PORT134_MSIOF2_TXD),
+        GPIO_FN(VIO_D5), GPIO_FN(PORT135_KEYIN1), GPIO_FN(PORT135_MSIOF2_TSCK),
+        GPIO_FN(VIO_D6), GPIO_FN(PORT136_KEYIN2),
+        GPIO_FN(VIO_D7), GPIO_FN(PORT137_KEYIN3),
+        GPIO_FN(VIO_D8), GPIO_FN(M9_SLCD_A01), GPIO_FN(PORT138_FSIAOMC),
+        GPIO_FN(VIO_D9), GPIO_FN(M10_SLCD_CK1), GPIO_FN(PORT139_FSIAOLR),
+        GPIO_FN(VIO_D10), GPIO_FN(M11_SLCD_SO1), GPIO_FN(TPU0TO2),
+        GPIO_FN(PORT140_FSIAOBT),
+        GPIO_FN(VIO_D11), GPIO_FN(M12_SLCD_CE1), GPIO_FN(TPU0TO3),
+        GPIO_FN(PORT141_FSIAOSLD),
+        GPIO_FN(VIO_D12), GPIO_FN(M13_BSW), GPIO_FN(PORT142_FSIACK),
+        GPIO_FN(VIO_D13), GPIO_FN(M14_GSW), GPIO_FN(PORT143_FSIAILR),
+        GPIO_FN(VIO_D14), GPIO_FN(M15_RSW), GPIO_FN(PORT144_FSIAIBT),
+        GPIO_FN(VIO_D15), GPIO_FN(TPU1TO3), GPIO_FN(PORT145_FSIAISLD),
+        GPIO_FN(VIO_CLK), GPIO_FN(PORT146_KEYIN4), GPIO_FN(IPORT2),
+        GPIO_FN(VIO_FIELD), GPIO_FN(PORT147_KEYIN5),
+        GPIO_FN(VIO_CKO), GPIO_FN(PORT148_KEYIN6),
+        GPIO_FN(A27), GPIO_FN(RDWR_XWE), GPIO_FN(MFG0_IN1),
+        GPIO_FN(MFG0_IN2),
+        GPIO_FN(TS_SPSYNC3), GPIO_FN(MSIOF2_RSCK),
+        GPIO_FN(TS_SDAT3), GPIO_FN(MSIOF2_RSYNC),
+        GPIO_FN(TPU1TO2), GPIO_FN(TS_SDEN3), GPIO_FN(PORT153_MSIOF2_SS1),
+        GPIO_FN(SOUT3), GPIO_FN(SCIFA2_TXD1), GPIO_FN(MSIOF2_MCK0),
+        GPIO_FN(SIN3), GPIO_FN(SCIFA2_RXD1), GPIO_FN(MSIOF2_MCK1),
+        GPIO_FN(XRTS3), GPIO_FN(SCIFA2_RTS1), GPIO_FN(PORT156_MSIOF2_SS2),
+        GPIO_FN(XCTS3), GPIO_FN(SCIFA2_CTS1), GPIO_FN(PORT157_MSIOF2_RXD),
+
+        /* 55-4 (FN) */
+        GPIO_FN(DINT), GPIO_FN(SCIFA2_SCK1), GPIO_FN(TS_SCK3),
+        GPIO_FN(PORT159_SCIFB_SCK), GPIO_FN(PORT159_SCIFA5_SCK), GPIO_FN(NMI),
+        GPIO_FN(PORT160_SCIFB_TXD), GPIO_FN(PORT160_SCIFA5_TXD), GPIO_FN(SOUT0),
+        GPIO_FN(PORT161_SCIFB_CTS), GPIO_FN(PORT161_SCIFA5_CTS), GPIO_FN(XCTS0),
+        GPIO_FN(MFG3_IN2),
+        GPIO_FN(PORT162_SCIFB_RXD), GPIO_FN(PORT162_SCIFA5_RXD), GPIO_FN(SIN0),
+        GPIO_FN(MFG3_IN1),
+        GPIO_FN(PORT163_SCIFB_RTS), GPIO_FN(PORT163_SCIFA5_RTS), GPIO_FN(XRTS0),
+        GPIO_FN(MFG3_OUT1), GPIO_FN(TPU3TO0),
+        GPIO_FN(LCDD0), GPIO_FN(PORT192_KEYOUT0), GPIO_FN(EXT_CKI),
+        GPIO_FN(LCDD1), GPIO_FN(PORT193_KEYOUT1), GPIO_FN(PORT193_SCIFA5_CTS),
+        GPIO_FN(BBIF2_TSYNC1),
+        GPIO_FN(LCDD2), GPIO_FN(PORT194_KEYOUT2), GPIO_FN(PORT194_SCIFA5_RTS),
+        GPIO_FN(BBIF2_TSCK1),
+        GPIO_FN(LCDD3), GPIO_FN(PORT195_KEYOUT3), GPIO_FN(PORT195_SCIFA5_RXD),
+        GPIO_FN(BBIF2_TXD1),
+        GPIO_FN(LCDD4), GPIO_FN(PORT196_KEYOUT4), GPIO_FN(PORT196_SCIFA5_TXD),
+        GPIO_FN(LCDD5), GPIO_FN(PORT197_KEYOUT5), GPIO_FN(PORT197_SCIFA5_SCK),
+        GPIO_FN(MFG2_OUT2),
+        GPIO_FN(LCDD6),
+        GPIO_FN(LCDD7), GPIO_FN(TPU4TO1), GPIO_FN(MFG4_OUT2),
+        GPIO_FN(LCDD8), GPIO_FN(PORT200_KEYIN0), GPIO_FN(VIO_DR0),
+        GPIO_FN(D16),
+        GPIO_FN(LCDD9), GPIO_FN(PORT201_KEYIN1), GPIO_FN(VIO_DR1),
+        GPIO_FN(D17),
+        GPIO_FN(LCDD10), GPIO_FN(PORT202_KEYIN2), GPIO_FN(VIO_DR2),
+        GPIO_FN(D18),
+        GPIO_FN(LCDD11), GPIO_FN(PORT203_KEYIN3), GPIO_FN(VIO_DR3),
+        GPIO_FN(D19),
+        GPIO_FN(LCDD12), GPIO_FN(PORT204_KEYIN4), GPIO_FN(VIO_DR4),
+        GPIO_FN(D20),
+        GPIO_FN(LCDD13), GPIO_FN(PORT205_KEYIN5), GPIO_FN(VIO_DR5),
+        GPIO_FN(D21),
+        GPIO_FN(LCDD14), GPIO_FN(PORT206_KEYIN6), GPIO_FN(VIO_DR6),
+        GPIO_FN(D22),
+        GPIO_FN(LCDD15), GPIO_FN(PORT207_MSIOF0L_SS1), GPIO_FN(PORT207_KEYOUT0),
+        GPIO_FN(VIO_DR7), GPIO_FN(D23),
+        GPIO_FN(LCDD16), GPIO_FN(PORT208_MSIOF0L_SS2), GPIO_FN(PORT208_KEYOUT1),
+        GPIO_FN(VIO_VDR), GPIO_FN(D24),
+        GPIO_FN(LCDD17), GPIO_FN(PORT209_KEYOUT2), GPIO_FN(VIO_HDR),
+        GPIO_FN(D25),
+        GPIO_FN(LCDD18), GPIO_FN(DREQ2), GPIO_FN(PORT210_MSIOF0L_SS1),
+        GPIO_FN(D26),
+        GPIO_FN(LCDD19), GPIO_FN(PORT211_MSIOF0L_SS2), GPIO_FN(D27),
+        GPIO_FN(LCDD20), GPIO_FN(TS_SPSYNC1), GPIO_FN(MSIOF0L_MCK0),
+        GPIO_FN(D28),
+        GPIO_FN(LCDD21), GPIO_FN(TS_SDAT1), GPIO_FN(MSIOF0L_MCK1),
+        GPIO_FN(D29),
+        GPIO_FN(LCDD22), GPIO_FN(TS_SDEN1), GPIO_FN(MSIOF0L_RSCK),
+        GPIO_FN(D30),
+        GPIO_FN(LCDD23), GPIO_FN(TS_SCK1), GPIO_FN(MSIOF0L_RSYNC),
+        GPIO_FN(D31),
+        GPIO_FN(LCDDCK), GPIO_FN(LCDWR), GPIO_FN(PORT216_KEYOUT3),
+        GPIO_FN(VIO_CLKR),
+        GPIO_FN(LCDRD), GPIO_FN(DACK2), GPIO_FN(MSIOF0L_TSYNC),
+        GPIO_FN(LCDHSYN), GPIO_FN(LCDCS), GPIO_FN(LCDCS2), GPIO_FN(DACK3),
+        GPIO_FN(PORT218_VIO_CKOR), GPIO_FN(PORT218_KEYOUT4),
+        GPIO_FN(LCDDISP), GPIO_FN(LCDRS), GPIO_FN(DREQ3), GPIO_FN(MSIOF0L_TSCK),
+        GPIO_FN(LCDVSYN), GPIO_FN(LCDVSYN2), GPIO_FN(PORT220_KEYOUT5),
+        GPIO_FN(LCDLCLK), GPIO_FN(DREQ1), GPIO_FN(PWEN), GPIO_FN(MSIOF0L_RXD),
+        GPIO_FN(LCDDON), GPIO_FN(LCDDON2), GPIO_FN(DACK1), GPIO_FN(OVCN),
+        GPIO_FN(MSIOF0L_TXD),
+        GPIO_FN(SCIFA1_TXD), GPIO_FN(OVCN2),
+        GPIO_FN(EXTLP), GPIO_FN(SCIFA1_SCK), GPIO_FN(USBTERM),
+        GPIO_FN(PORT226_VIO_CKO2),
+        GPIO_FN(SCIFA1_RTS), GPIO_FN(IDIN),
+        GPIO_FN(SCIFA1_RXD),
+        GPIO_FN(SCIFA1_CTS), GPIO_FN(MFG1_IN1),
+        GPIO_FN(MSIOF1_TXD), GPIO_FN(SCIFA2_TXD2), GPIO_FN(PORT230_FSIAOMC),
+        GPIO_FN(MSIOF1_TSYNC), GPIO_FN(SCIFA2_CTS2), GPIO_FN(PORT231_FSIAOLR),
+        GPIO_FN(MSIOF1_TSCK), GPIO_FN(SCIFA2_SCK2), GPIO_FN(PORT232_FSIAOBT),
+        GPIO_FN(MSIOF1_RXD), GPIO_FN(SCIFA2_RXD2), GPIO_FN(GPS_VCOTRIG),
+        GPIO_FN(PORT233_FSIACK),
+        GPIO_FN(MSIOF1_RSCK), GPIO_FN(SCIFA2_RTS2), GPIO_FN(PORT234_FSIAOSLD),
+        GPIO_FN(MSIOF1_RSYNC), GPIO_FN(OPORT0), GPIO_FN(MFG1_IN2),
+        GPIO_FN(PORT235_FSIAILR),
+        GPIO_FN(MSIOF1_MCK0), GPIO_FN(I2C_SDA2), GPIO_FN(PORT236_FSIAIBT),
+        GPIO_FN(MSIOF1_MCK1), GPIO_FN(I2C_SCL2), GPIO_FN(PORT237_FSIAISLD),
+        GPIO_FN(MSIOF1_SS1), GPIO_FN(EDBGREQ3),
+
+        /* 55-5 (FN) */
+        GPIO_FN(MSIOF1_SS2),
+        GPIO_FN(SCIFA6_TXD),
+        GPIO_FN(PORT241_IRDA_OUT), GPIO_FN(PORT241_IROUT), GPIO_FN(MFG4_OUT1),
+        GPIO_FN(TPU4TO0),
+        GPIO_FN(PORT242_IRDA_IN), GPIO_FN(MFG4_IN2),
+        GPIO_FN(PORT243_IRDA_FIRSEL), GPIO_FN(PORT243_VIO_CKO2),
+        GPIO_FN(PORT244_SCIFA5_CTS), GPIO_FN(MFG2_IN1),
+        GPIO_FN(PORT244_SCIFB_CTS),
+        GPIO_FN(PORT245_SCIFA5_RTS), GPIO_FN(MFG2_IN2),
+        GPIO_FN(PORT245_SCIFB_RTS),
+        GPIO_FN(PORT246_SCIFA5_RXD), GPIO_FN(MFG1_OUT1),
+        GPIO_FN(PORT246_SCIFB_RXD), GPIO_FN(TPU1TO0),
+        GPIO_FN(PORT247_SCIFA5_TXD), GPIO_FN(MFG3_OUT2),
+        GPIO_FN(PORT247_SCIFB_TXD), GPIO_FN(TPU3TO1),
+        GPIO_FN(PORT248_SCIFA5_SCK), GPIO_FN(MFG2_OUT1),
+        GPIO_FN(PORT248_SCIFB_SCK), GPIO_FN(TPU2TO0),
+        GPIO_FN(PORT249_IROUT), GPIO_FN(MFG4_IN1),
+        GPIO_FN(SDHICLK0), GPIO_FN(TCK2_SWCLK_MC0),
+        GPIO_FN(SDHICD0),
+        GPIO_FN(SDHID0_0), GPIO_FN(TMS2_SWDIO_MC0),
+        GPIO_FN(SDHID0_1), GPIO_FN(TDO2_SWO0_MC0),
+        GPIO_FN(SDHID0_2), GPIO_FN(TDI2),
+        GPIO_FN(SDHID0_3), GPIO_FN(RTCK2_SWO1_MC0),
+        GPIO_FN(SDHICMD0), GPIO_FN(TRST2),
+        GPIO_FN(SDHIWP0), GPIO_FN(EDBGREQ2),
+        GPIO_FN(SDHICLK1), GPIO_FN(TCK3_SWCLK_MC1),
+        GPIO_FN(SDHID1_0), GPIO_FN(M11_SLCD_SO2), GPIO_FN(TS_SPSYNC2),
+        GPIO_FN(TMS3_SWDIO_MC1),
+        GPIO_FN(SDHID1_1), GPIO_FN(M9_SLCD_A02), GPIO_FN(TS_SDAT2),
+        GPIO_FN(TDO3_SWO0_MC1),
+        GPIO_FN(SDHID1_2), GPIO_FN(M10_SLCD_CK2), GPIO_FN(TS_SDEN2),
+        GPIO_FN(TDI3),
+        GPIO_FN(SDHID1_3), GPIO_FN(M12_SLCD_CE2), GPIO_FN(TS_SCK2),
+        GPIO_FN(RTCK3_SWO1_MC1),
+        GPIO_FN(SDHICMD1), GPIO_FN(TRST3),
+        GPIO_FN(RESETOUTS),
+};
+
+/* helper for top 4 bits in PORTnCR */
+#define PCRH(in, in_pd, in_pu, out)     \
+        0, (out), (in), 0,      \
+                0, 0, 0, 0,     \
+                0, 0, (in_pd), 0,       \
+                0, 0, (in_pu), 0
+
+#define PORTCR(nr, reg) \
+        { PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) {   \
+                        PCRH(PORT##nr##_IN, PORT##nr##_IN_PD,   \
+                                 PORT##nr##_IN_PU, PORT##nr##_OUT),     \
+                                PORT##nr##_FN0, PORT##nr##_FN1, \
+                                PORT##nr##_FN2, PORT##nr##_FN3, \
+                                PORT##nr##_FN4, PORT##nr##_FN5, \
+                                PORT##nr##_FN6, PORT##nr##_FN7 }        \
+        }
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+        PORTCR(0, 0xe6050000), /* PORT0CR */
+        PORTCR(1, 0xe6050001), /* PORT1CR */
+        PORTCR(2, 0xe6050002), /* PORT2CR */
+        PORTCR(3, 0xe6050003), /* PORT3CR */
+        PORTCR(4, 0xe6050004), /* PORT4CR */
+        PORTCR(5, 0xe6050005), /* PORT5CR */
+        PORTCR(6, 0xe6050006), /* PORT6CR */
+        PORTCR(7, 0xe6050007), /* PORT7CR */
+        PORTCR(8, 0xe6050008), /* PORT8CR */
+        PORTCR(9, 0xe6050009), /* PORT9CR */
+
+        PORTCR(10, 0xe605000a), /* PORT10CR */
+        PORTCR(11, 0xe605000b), /* PORT11CR */
+        PORTCR(12, 0xe605000c), /* PORT12CR */
+        PORTCR(13, 0xe605000d), /* PORT13CR */
+        PORTCR(14, 0xe605000e), /* PORT14CR */
+        PORTCR(15, 0xe605000f), /* PORT15CR */
+        PORTCR(16, 0xe6050010), /* PORT16CR */
+        PORTCR(17, 0xe6050011), /* PORT17CR */
+        PORTCR(18, 0xe6050012), /* PORT18CR */
+        PORTCR(19, 0xe6050013), /* PORT19CR */
+
+        PORTCR(20, 0xe6050014), /* PORT20CR */
+        PORTCR(21, 0xe6050015), /* PORT21CR */
+        PORTCR(22, 0xe6050016), /* PORT22CR */
+        PORTCR(23, 0xe6050017), /* PORT23CR */
+        PORTCR(24, 0xe6050018), /* PORT24CR */
+        PORTCR(25, 0xe6050019), /* PORT25CR */
+        PORTCR(26, 0xe605001a), /* PORT26CR */
+        PORTCR(27, 0xe605001b), /* PORT27CR */
+        PORTCR(28, 0xe605001c), /* PORT28CR */
+        PORTCR(29, 0xe605001d), /* PORT29CR */
+
+        PORTCR(30, 0xe605001e), /* PORT30CR */
+        PORTCR(31, 0xe605001f), /* PORT31CR */
+        PORTCR(32, 0xe6050020), /* PORT32CR */
+        PORTCR(33, 0xe6050021), /* PORT33CR */
+        PORTCR(34, 0xe6050022), /* PORT34CR */
+        PORTCR(35, 0xe6050023), /* PORT35CR */
+        PORTCR(36, 0xe6050024), /* PORT36CR */
+        PORTCR(37, 0xe6050025), /* PORT37CR */
+        PORTCR(38, 0xe6050026), /* PORT38CR */
+        PORTCR(39, 0xe6050027), /* PORT39CR */
+
+        PORTCR(40, 0xe6050028), /* PORT40CR */
+        PORTCR(41, 0xe6050029), /* PORT41CR */
+        PORTCR(42, 0xe605002a), /* PORT42CR */
+        PORTCR(43, 0xe605002b), /* PORT43CR */
+        PORTCR(44, 0xe605002c), /* PORT44CR */
+        PORTCR(45, 0xe605002d), /* PORT45CR */
+        PORTCR(46, 0xe605002e), /* PORT46CR */
+        PORTCR(47, 0xe605002f), /* PORT47CR */
+        PORTCR(48, 0xe6050030), /* PORT48CR */
+        PORTCR(49, 0xe6050031), /* PORT49CR */
+
+        PORTCR(50, 0xe6050032), /* PORT50CR */
+        PORTCR(51, 0xe6050033), /* PORT51CR */
+        PORTCR(52, 0xe6050034), /* PORT52CR */
+        PORTCR(53, 0xe6050035), /* PORT53CR */
+        PORTCR(54, 0xe6050036), /* PORT54CR */
+        PORTCR(55, 0xe6050037), /* PORT55CR */
+        PORTCR(56, 0xe6050038), /* PORT56CR */
+        PORTCR(57, 0xe6050039), /* PORT57CR */
+        PORTCR(58, 0xe605003a), /* PORT58CR */
+        PORTCR(59, 0xe605003b), /* PORT59CR */
+
+        PORTCR(60, 0xe605003c), /* PORT60CR */
+        PORTCR(61, 0xe605003d), /* PORT61CR */
+        PORTCR(62, 0xe605003e), /* PORT62CR */
+        PORTCR(63, 0xe605003f), /* PORT63CR */
+        PORTCR(64, 0xe6050040), /* PORT64CR */
+        PORTCR(65, 0xe6050041), /* PORT65CR */
+        PORTCR(66, 0xe6050042), /* PORT66CR */
+        PORTCR(67, 0xe6050043), /* PORT67CR */
+        PORTCR(68, 0xe6050044), /* PORT68CR */
+        PORTCR(69, 0xe6050045), /* PORT69CR */
+
+        PORTCR(70, 0xe6050046), /* PORT70CR */
+        PORTCR(71, 0xe6050047), /* PORT71CR */
+        PORTCR(72, 0xe6050048), /* PORT72CR */
+        PORTCR(73, 0xe6050049), /* PORT73CR */
+        PORTCR(74, 0xe605004a), /* PORT74CR */
+        PORTCR(75, 0xe605004b), /* PORT75CR */
+        PORTCR(76, 0xe605004c), /* PORT76CR */
+        PORTCR(77, 0xe605004d), /* PORT77CR */
+        PORTCR(78, 0xe605004e), /* PORT78CR */
+        PORTCR(79, 0xe605004f), /* PORT79CR */
+
+        PORTCR(80, 0xe6050050), /* PORT80CR */
+        PORTCR(81, 0xe6050051), /* PORT81CR */
+        PORTCR(82, 0xe6050052), /* PORT82CR */
+        PORTCR(83, 0xe6050053), /* PORT83CR */
+        PORTCR(84, 0xe6050054), /* PORT84CR */
+        PORTCR(85, 0xe6050055), /* PORT85CR */
+        PORTCR(86, 0xe6050056), /* PORT86CR */
+        PORTCR(87, 0xe6050057), /* PORT87CR */
+        PORTCR(88, 0xe6050058), /* PORT88CR */
+        PORTCR(89, 0xe6050059), /* PORT89CR */
+
+        PORTCR(90, 0xe605005a), /* PORT90CR */
+        PORTCR(91, 0xe605005b), /* PORT91CR */
+        PORTCR(92, 0xe605005c), /* PORT92CR */
+        PORTCR(93, 0xe605005d), /* PORT93CR */
+        PORTCR(94, 0xe605005e), /* PORT94CR */
+        PORTCR(95, 0xe605005f), /* PORT95CR */
+        PORTCR(96, 0xe6050060), /* PORT96CR */
+        PORTCR(97, 0xe6050061), /* PORT97CR */
+        PORTCR(98, 0xe6050062), /* PORT98CR */
+        PORTCR(99, 0xe6050063), /* PORT99CR */
+
+        PORTCR(100, 0xe6050064), /* PORT100CR */
+        PORTCR(101, 0xe6050065), /* PORT101CR */
+        PORTCR(102, 0xe6050066), /* PORT102CR */
+        PORTCR(103, 0xe6050067), /* PORT103CR */
+        PORTCR(104, 0xe6050068), /* PORT104CR */
+        PORTCR(105, 0xe6050069), /* PORT105CR */
+        PORTCR(106, 0xe605006a), /* PORT106CR */
+        PORTCR(107, 0xe605006b), /* PORT107CR */
+        PORTCR(108, 0xe605006c), /* PORT108CR */
+        PORTCR(109, 0xe605006d), /* PORT109CR */
+
+        PORTCR(110, 0xe605006e), /* PORT110CR */
+        PORTCR(111, 0xe605006f), /* PORT111CR */
+        PORTCR(112, 0xe6050070), /* PORT112CR */
+        PORTCR(113, 0xe6050071), /* PORT113CR */
+        PORTCR(114, 0xe6050072), /* PORT114CR */
+        PORTCR(115, 0xe6050073), /* PORT115CR */
+        PORTCR(116, 0xe6050074), /* PORT116CR */
+        PORTCR(117, 0xe6050075), /* PORT117CR */
+        PORTCR(118, 0xe6050076), /* PORT118CR */
+
+        PORTCR(128, 0xe6051080), /* PORT128CR */
+        PORTCR(129, 0xe6051081), /* PORT129CR */
+
+        PORTCR(130, 0xe6051082), /* PORT130CR */
+        PORTCR(131, 0xe6051083), /* PORT131CR */
+        PORTCR(132, 0xe6051084), /* PORT132CR */
+        PORTCR(133, 0xe6051085), /* PORT133CR */
+        PORTCR(134, 0xe6051086), /* PORT134CR */
+        PORTCR(135, 0xe6051087), /* PORT135CR */
+        PORTCR(136, 0xe6051088), /* PORT136CR */
+        PORTCR(137, 0xe6051089), /* PORT137CR */
+        PORTCR(138, 0xe605108a), /* PORT138CR */
+        PORTCR(139, 0xe605108b), /* PORT139CR */
+
+        PORTCR(140, 0xe605108c), /* PORT140CR */
+        PORTCR(141, 0xe605108d), /* PORT141CR */
+        PORTCR(142, 0xe605108e), /* PORT142CR */
+        PORTCR(143, 0xe605108f), /* PORT143CR */
+        PORTCR(144, 0xe6051090), /* PORT144CR */
+        PORTCR(145, 0xe6051091), /* PORT145CR */
+        PORTCR(146, 0xe6051092), /* PORT146CR */
+        PORTCR(147, 0xe6051093), /* PORT147CR */
+        PORTCR(148, 0xe6051094), /* PORT148CR */
+        PORTCR(149, 0xe6051095), /* PORT149CR */
+
+        PORTCR(150, 0xe6051096), /* PORT150CR */
+        PORTCR(151, 0xe6051097), /* PORT151CR */
+        PORTCR(152, 0xe6051098), /* PORT152CR */
+        PORTCR(153, 0xe6051099), /* PORT153CR */
+        PORTCR(154, 0xe605109a), /* PORT154CR */
+        PORTCR(155, 0xe605109b), /* PORT155CR */
+        PORTCR(156, 0xe605109c), /* PORT156CR */
+        PORTCR(157, 0xe605109d), /* PORT157CR */
+        PORTCR(158, 0xe605109e), /* PORT158CR */
+        PORTCR(159, 0xe605109f), /* PORT159CR */
+
+        PORTCR(160, 0xe60510a0), /* PORT160CR */
+        PORTCR(161, 0xe60510a1), /* PORT161CR */
+        PORTCR(162, 0xe60510a2), /* PORT162CR */
+        PORTCR(163, 0xe60510a3), /* PORT163CR */
+        PORTCR(164, 0xe60510a4), /* PORT164CR */
+
+        PORTCR(192, 0xe60520c0), /* PORT192CR */
+        PORTCR(193, 0xe60520c1), /* PORT193CR */
+        PORTCR(194, 0xe60520c2), /* PORT194CR */
+        PORTCR(195, 0xe60520c3), /* PORT195CR */
+        PORTCR(196, 0xe60520c4), /* PORT196CR */
+        PORTCR(197, 0xe60520c5), /* PORT197CR */
+        PORTCR(198, 0xe60520c6), /* PORT198CR */
+        PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+        PORTCR(200, 0xe60520c8), /* PORT200CR */
+        PORTCR(201, 0xe60520c9), /* PORT201CR */
+        PORTCR(202, 0xe60520ca), /* PORT202CR */
+        PORTCR(203, 0xe60520cb), /* PORT203CR */
+        PORTCR(204, 0xe60520cc), /* PORT204CR */
+        PORTCR(205, 0xe60520cd), /* PORT205CR */
+        PORTCR(206, 0xe60520ce), /* PORT206CR */
+        PORTCR(207, 0xe60520cf), /* PORT207CR */
+        PORTCR(208, 0xe60520d0), /* PORT208CR */
+        PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+        PORTCR(210, 0xe60520d2), /* PORT210CR */
+        PORTCR(211, 0xe60520d3), /* PORT211CR */
+        PORTCR(212, 0xe60520d4), /* PORT212CR */
+        PORTCR(213, 0xe60520d5), /* PORT213CR */
+        PORTCR(214, 0xe60520d6), /* PORT214CR */
+        PORTCR(215, 0xe60520d7), /* PORT215CR */
+        PORTCR(216, 0xe60520d8), /* PORT216CR */
+        PORTCR(217, 0xe60520d9), /* PORT217CR */
+        PORTCR(218, 0xe60520da), /* PORT218CR */
+        PORTCR(219, 0xe60520db), /* PORT219CR */
+
+        PORTCR(220, 0xe60520dc), /* PORT220CR */
+        PORTCR(221, 0xe60520dd), /* PORT221CR */
+        PORTCR(222, 0xe60520de), /* PORT222CR */
+        PORTCR(223, 0xe60520df), /* PORT223CR */
+        PORTCR(224, 0xe60520e0), /* PORT224CR */
+        PORTCR(225, 0xe60520e1), /* PORT225CR */
+        PORTCR(226, 0xe60520e2), /* PORT226CR */
+        PORTCR(227, 0xe60520e3), /* PORT227CR */
+        PORTCR(228, 0xe60520e4), /* PORT228CR */
+        PORTCR(229, 0xe60520e5), /* PORT229CR */
+
+        PORTCR(230, 0xe60520e6), /* PORT230CR */
+        PORTCR(231, 0xe60520e7), /* PORT231CR */
+        PORTCR(232, 0xe60520e8), /* PORT232CR */
+        PORTCR(233, 0xe60520e9), /* PORT233CR */
+        PORTCR(234, 0xe60520ea), /* PORT234CR */
+        PORTCR(235, 0xe60520eb), /* PORT235CR */
+        PORTCR(236, 0xe60520ec), /* PORT236CR */
+        PORTCR(237, 0xe60520ed), /* PORT237CR */
+        PORTCR(238, 0xe60520ee), /* PORT238CR */
+        PORTCR(239, 0xe60520ef), /* PORT239CR */
+
+        PORTCR(240, 0xe60520f0), /* PORT240CR */
+        PORTCR(241, 0xe60520f1), /* PORT241CR */
+        PORTCR(242, 0xe60520f2), /* PORT242CR */
+        PORTCR(243, 0xe60520f3), /* PORT243CR */
+        PORTCR(244, 0xe60520f4), /* PORT244CR */
+        PORTCR(245, 0xe60520f5), /* PORT245CR */
+        PORTCR(246, 0xe60520f6), /* PORT246CR */
+        PORTCR(247, 0xe60520f7), /* PORT247CR */
+        PORTCR(248, 0xe60520f8), /* PORT248CR */
+        PORTCR(249, 0xe60520f9), /* PORT249CR */
+
+        PORTCR(250, 0xe60520fa), /* PORT250CR */
+        PORTCR(251, 0xe60520fb), /* PORT251CR */
+        PORTCR(252, 0xe60520fc), /* PORT252CR */
+        PORTCR(253, 0xe60520fd), /* PORT253CR */
+        PORTCR(254, 0xe60520fe), /* PORT254CR */
+        PORTCR(255, 0xe60520ff), /* PORT255CR */
+        PORTCR(256, 0xe6052100), /* PORT256CR */
+        PORTCR(257, 0xe6052101), /* PORT257CR */
+        PORTCR(258, 0xe6052102), /* PORT258CR */
+        PORTCR(259, 0xe6052103), /* PORT259CR */
+
+        PORTCR(260, 0xe6052104), /* PORT260CR */
+        PORTCR(261, 0xe6052105), /* PORT261CR */
+        PORTCR(262, 0xe6052106), /* PORT262CR */
+        PORTCR(263, 0xe6052107), /* PORT263CR */
+        PORTCR(264, 0xe6052108), /* PORT264CR */
+
+        { PINMUX_CFG_REG("MSELBCR", 0xe6058024, 32, 1) {
+                        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                        MSELBCR_MSEL17_0, MSELBCR_MSEL17_1,
+                        MSELBCR_MSEL16_0, MSELBCR_MSEL16_1,
+                        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+                        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }
+        },
+        { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+        { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+                        PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+                        PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+                        PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+                        PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+                        PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+                        PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+                        PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+                        PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+        },
+        { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054004, 32) {
+                        PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+                        PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+                        PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+                        PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+                        PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+                        PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+                        PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+                        PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+        },
+        { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054008, 32) {
+                        PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+                        PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+                        PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+                        PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+                        PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+                        PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+                        PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+                        PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+        },
+        { PINMUX_DATA_REG("PORTD127_096DR", 0xe605400C, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+                        PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+                        PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+                        PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+                        PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+                        PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+        },
+        { PINMUX_DATA_REG("PORTD159_128DR", 0xe6055000, 32) {
+                        PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+                        PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+                        PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+                        PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+                        PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+                        PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+                        PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+                        PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+        },
+        { PINMUX_DATA_REG("PORTR191_160DR", 0xe6055004, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, PORT164_DATA,
+                        PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+        },
+        { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056000, 32) {
+                        PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+                        PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+                        PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+                        PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+                        PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+                        PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+                        PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+                        PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+        },
+        { PINMUX_DATA_REG("PORTU255_224DR", 0xe6056004, 32) {
+                        PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+                        PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+                        PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+                        PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+                        PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+                        PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+                        PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+                        PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+        },
+        { PINMUX_DATA_REG("PORTU287_256DR", 0xe6056008, 32) {
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, 0,
+                        0, 0, 0, PORT264_DATA,
+                        PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+                        PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+        },
+        { },
+};
+
+static struct pinmux_info sh7377_pinmux_info = {
+        .name = "sh7377_pfc",
+        .reserved_id = PINMUX_RESERVED,
+        .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+        .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+        .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+        .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+        .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+        .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+        .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+        .first_gpio = GPIO_PORT0,
+        .last_gpio = GPIO_FN_RESETOUTS,
+
+        .gpios = pinmux_gpios,
+        .cfg_regs = pinmux_config_regs,
+        .data_regs = pinmux_data_regs,
+
+        .gpio_data = pinmux_data,
+        .gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh7377_pinmux_init(void)
+{
+        register_pinmux(&sh7377_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
new file mode 100644
index 00000000000..eca90716140
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -0,0 +1,198 @@
+/*
+ * sh7367 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+        .mapbase        = 0xe6c40000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+        .name           = "sh-sci",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &scif0_platform_data,
+        },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+        .mapbase        = 0xe6c50000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+        .name           = "sh-sci",
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &scif1_platform_data,
+        },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+        .mapbase        = 0xe6c60000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+        .name           = "sh-sci",
+        .id             = 2,
+        .dev            = {
+                .platform_data  = &scif2_platform_data,
+        },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+        .mapbase        = 0xe6c70000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+        .name           = "sh-sci",
+        .id             = 3,
+        .dev            = {
+                .platform_data  = &scif3_platform_data,
+        },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+        .mapbase        = 0xe6c80000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+        .name           = "sh-sci",
+        .id             = 4,
+        .dev            = {
+                .platform_data  = &scif4_platform_data,
+        },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+        .mapbase        = 0xe6cb0000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+        .name           = "sh-sci",
+        .id             = 5,
+        .dev            = {
+                .platform_data  = &scif5_platform_data,
+        },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+        .mapbase        = 0xe6c30000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+        .name           = "sh-sci",
+        .id             = 6,
+        .dev            = {
+                .platform_data  = &scif6_platform_data,
+        },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+        .name = "CMT10",
+        .channel_offset = 0x10,
+        .timer_bit = 0,
+        .clk = "r_clk",
+        .clockevent_rating = 125,
+        .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+        [0] = {
+                .name   = "CMT10",
+                .start  = 0xe6138010,
+                .end    = 0xe613801b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 72,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cmt10_device = {
+        .name           = "sh_cmt",
+        .id             = 10,
+        .dev = {
+                .platform_data  = &cmt10_platform_data,
+        },
+        .resource       = cmt10_resources,
+        .num_resources  = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7367_early_devices[] __initdata = {
+        &scif0_device,
+        &scif1_device,
+        &scif2_device,
+        &scif3_device,
+        &scif4_device,
+        &scif5_device,
+        &scif6_device,
+        &cmt10_device,
+};
+
+void __init sh7367_add_standard_devices(void)
+{
+        platform_add_devices(sh7367_early_devices,
+                             ARRAY_SIZE(sh7367_early_devices));
+}
+
+#define SYMSTPCR2 0xe6158048
+#define SYMSTPCR2_CMT1 (1 << 29)
+
+void __init sh7367_add_early_devices(void)
+{
+        /* enable clock to CMT1 */
+        __raw_writel(__raw_readl(SYMSTPCR2) & ~SYMSTPCR2_CMT1, SYMSTPCR2);
+
+        early_platform_add_devices(sh7367_early_devices,
+                                   ARRAY_SIZE(sh7367_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
new file mode 100644
index 00000000000..1d1153290f5
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -0,0 +1,199 @@
+/*
+ * sh7372 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+        .mapbase        = 0xe6c40000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+        .name           = "sh-sci",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &scif0_platform_data,
+        },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+        .mapbase        = 0xe6c50000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+        .name           = "sh-sci",
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &scif1_platform_data,
+        },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+        .mapbase        = 0xe6c60000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+        .name           = "sh-sci",
+        .id             = 2,
+        .dev            = {
+                .platform_data  = &scif2_platform_data,
+        },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+        .mapbase        = 0xe6c70000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+        .name           = "sh-sci",
+        .id             = 3,
+        .dev            = {
+                .platform_data  = &scif3_platform_data,
+        },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+        .mapbase        = 0xe6c80000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+        .name           = "sh-sci",
+        .id             = 4,
+        .dev            = {
+                .platform_data  = &scif4_platform_data,
+        },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+        .mapbase        = 0xe6cb0000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+        .name           = "sh-sci",
+        .id             = 5,
+        .dev            = {
+                .platform_data  = &scif5_platform_data,
+        },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+        .mapbase        = 0xe6c30000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif6_device = {
+        .name           = "sh-sci",
+        .id             = 6,
+        .dev            = {
+                .platform_data  = &scif6_platform_data,
+        },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+        .name = "CMT10",
+        .channel_offset = 0x10,
+        .timer_bit = 0,
+        .clk = "r_clk",
+        .clockevent_rating = 125,
+        .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+        [0] = {
+                .name   = "CMT10",
+                .start  = 0xe6138010,
+                .end    = 0xe613801b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 72,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cmt10_device = {
+        .name           = "sh_cmt",
+        .id             = 10,
+        .dev = {
+                .platform_data  = &cmt10_platform_data,
+        },
+        .resource       = cmt10_resources,
+        .num_resources  = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7372_early_devices[] __initdata = {
+        &scif0_device,
+        &scif1_device,
+        &scif2_device,
+        &scif3_device,
+        &scif4_device,
+        &scif5_device,
+        &scif6_device,
+        &cmt10_device,
+};
+
+void __init sh7372_add_standard_devices(void)
+{
+        platform_add_devices(sh7372_early_devices,
+                            ARRAY_SIZE(sh7372_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7372_add_early_devices(void)
+{
+        /* enable clock to CMT1 */
+        __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+        early_platform_add_devices(sh7372_early_devices,
+                                   ARRAY_SIZE(sh7372_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c
new file mode 100644
index 00000000000..60e37774c35
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh7377.c
@@ -0,0 +1,215 @@
+/*
+ * sh7377 processor support
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+        .mapbase        = 0xe6c40000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 80, 80, 80, 80 },
+};
+
+static struct platform_device scif0_device = {
+        .name           = "sh-sci",
+        .id             = 0,
+        .dev            = {
+                .platform_data  = &scif0_platform_data,
+        },
+};
+
+static struct plat_sci_port scif1_platform_data = {
+        .mapbase        = 0xe6c50000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 81, 81, 81, 81 },
+};
+
+static struct platform_device scif1_device = {
+        .name           = "sh-sci",
+        .id             = 1,
+        .dev            = {
+                .platform_data  = &scif1_platform_data,
+        },
+};
+
+static struct plat_sci_port scif2_platform_data = {
+        .mapbase        = 0xe6c60000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 82, 82, 82, 82 },
+};
+
+static struct platform_device scif2_device = {
+        .name           = "sh-sci",
+        .id             = 2,
+        .dev            = {
+                .platform_data  = &scif2_platform_data,
+        },
+};
+
+static struct plat_sci_port scif3_platform_data = {
+        .mapbase        = 0xe6c70000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 83, 83, 83, 83 },
+};
+
+static struct platform_device scif3_device = {
+        .name           = "sh-sci",
+        .id             = 3,
+        .dev            = {
+                .platform_data  = &scif3_platform_data,
+        },
+};
+
+static struct plat_sci_port scif4_platform_data = {
+        .mapbase        = 0xe6c80000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 89, 89, 89, 89 },
+};
+
+static struct platform_device scif4_device = {
+        .name           = "sh-sci",
+        .id             = 4,
+        .dev            = {
+                .platform_data  = &scif4_platform_data,
+        },
+};
+
+static struct plat_sci_port scif5_platform_data = {
+        .mapbase        = 0xe6cb0000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 90, 90, 90, 90 },
+};
+
+static struct platform_device scif5_device = {
+        .name           = "sh-sci",
+        .id             = 5,
+        .dev            = {
+                .platform_data  = &scif5_platform_data,
+        },
+};
+
+static struct plat_sci_port scif6_platform_data = {
+        .mapbase        = 0xe6cc0000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 196, 196, 196, 196 },
+};
+
+static struct platform_device scif6_device = {
+        .name           = "sh-sci",
+        .id             = 6,
+        .dev            = {
+                .platform_data  = &scif6_platform_data,
+        },
+};
+
+static struct plat_sci_port scif7_platform_data = {
+        .mapbase        = 0xe6c30000,
+        .flags          = UPF_BOOT_AUTOCONF,
+        .type           = PORT_SCIF,
+        .irqs           = { 91, 91, 91, 91 },
+};
+
+static struct platform_device scif7_device = {
+        .name           = "sh-sci",
+        .id             = 7,
+        .dev            = {
+                .platform_data  = &scif7_platform_data,
+        },
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+        .name = "CMT10",
+        .channel_offset = 0x10,
+        .timer_bit = 0,
+        .clk = "r_clk",
+        .clockevent_rating = 125,
+        .clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+        [0] = {
+                .name   = "CMT10",
+                .start  = 0xe6138010,
+                .end    = 0xe613801b,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = 72,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device cmt10_device = {
+        .name           = "sh_cmt",
+        .id             = 10,
+        .dev = {
+                .platform_data  = &cmt10_platform_data,
+        },
+        .resource       = cmt10_resources,
+        .num_resources  = ARRAY_SIZE(cmt10_resources),
+};
+
+static struct platform_device *sh7377_early_devices[] __initdata = {
+        &scif0_device,
+        &scif1_device,
+        &scif2_device,
+        &scif3_device,
+        &scif4_device,
+        &scif5_device,
+        &scif6_device,
+        &scif7_device,
+        &cmt10_device,
+};
+
+void __init sh7377_add_standard_devices(void)
+{
+        platform_add_devices(sh7377_early_devices,
+                            ARRAY_SIZE(sh7377_early_devices));
+}
+
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR3_CMT1 (1 << 29)
+
+void __init sh7377_add_early_devices(void)
+{
+        /* enable clock to CMT1 */
+        __raw_writel(__raw_readl(SMSTPCR3) & ~SMSTPCR3_CMT1, SMSTPCR3);
+
+        early_platform_add_devices(sh7377_early_devices,
+                                   ARRAY_SIZE(sh7377_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
new file mode 100644
index 00000000000..895794b543c
--- /dev/null
+++ b/arch/arm/mach-shmobile/timer.c
@@ -0,0 +1,46 @@
+/*
+ * SH-Mobile Timer
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2002 - 2009  Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <asm/mach/time.h>
+
+static void __init shmobile_late_time_init(void)
+{
+        /*
+         * Make sure all compiled-in early timers register themselves.
+         *
+         * Run probe() for two "earlytimer" devices, these will be the
+         * clockevents and clocksource devices respectively. In the event
+         * that only a clockevents device is available, we -ENODEV on the
+         * clocksource and the jiffies clocksource is used transparently
+         * instead. No error handling is necessary here.
+         */
+        early_platform_driver_register_all("earlytimer");
+        early_platform_driver_probe("earlytimer", 2, 0);
+}
+
+static void __init shmobile_timer_init(void)
+{
+        late_time_init = shmobile_late_time_init;
+}
+
+struct sys_timer shmobile_timer = {
+        .init           = shmobile_timer_init,
+};
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 1708da82da9..761ffede6a2 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1067,4 +1067,6 @@ void setup_mm_for_reboot(char mode)
                 pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
                 flush_pmd_entry(pmd);
         }
+
+        local_flush_tlb_all();
 }
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d8f6d..795dc615f43 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area)
 ENTRY(cpu_arm7_data_abort)
         mrc     p15, 0, r1, c5, c0, 0           @ get FSR
         mrc     p15, 0, r0, c6, c0, 0           @ get FAR
-        ldr     r8, [r0]                        @ read arm instruction
+        ldr     r8, [r2]                        @ read arm instruction
         tst     r8, #1 << 20                    @ L = 0 -> write?
         orreq   r1, r1, #1 << 11                @ yes.
         and     r7, r8, #15 << 24
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 395cc90c661..7a5337ed7d6 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -59,8 +59,6 @@ ENTRY(cpu_v6_proc_fin)
  *      to what would be the reset vector.
  *
  *      - loc   - location to jump to for soft reset
- *
- *      It is assumed that:
  */
         .align  5
 ENTRY(cpu_v6_reset)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a285218fd1..7aaf88a3b7a 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -45,7 +45,14 @@ ENTRY(cpu_v7_proc_init)
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-        mov     pc, lr
+        stmfd   sp!, {lr}
+        cpsid   if                              @ disable interrupts
+        bl      v7_flush_kern_cache_all
+        mrc     p15, 0, r0, c1, c0, 0           @ ctrl register
+        bic     r0, r0, #0x1000                 @ ...i............
+        bic     r0, r0, #0x0006                 @ .............ca.
+        mcr     p15, 0, r0, c1, c0, 0           @ disable caches
+        ldmfd   sp!, {pc}
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -56,8 +63,6 @@ ENDPROC(cpu_v7_proc_fin)
  *      to what would be the reset vector.
  *
  *      - loc   - location to jump to for soft reset
- *
- *      It is assumed that:
  */
         .align  5
 ENTRY(cpu_v7_reset)
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8b0a1ee039f..7f7ad6f289b 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,38 +9,43 @@ choice
 config ARCH_MX1
         bool "MX1-based"
         select CPU_ARM920T
-        select COMMON_CLKDEV
+        select IMX_HAVE_IOMUX_V1
         help
           This enables support for systems based on the Freescale i.MX1 family
 
 config ARCH_MX2
         bool "MX2-based"
         select CPU_ARM926T
-        select COMMON_CLKDEV
+        select IMX_HAVE_IOMUX_V1
         help
           This enables support for systems based on the Freescale i.MX2 family
 
 config ARCH_MX25
         bool "MX25-based"
         select CPU_ARM926T
-        select COMMON_CLKDEV
+        select ARCH_MXC_IOMUX_V3
+        select HAVE_FB_IMX
         help
           This enables support for systems based on the Freescale i.MX25 family
 
 config ARCH_MX3
         bool "MX3-based"
         select CPU_V6
-        select COMMON_CLKDEV
         help
           This enables support for systems based on the Freescale i.MX3 family
 
 config ARCH_MXC91231
         bool "MXC91231-based"
         select CPU_V6
-        select COMMON_CLKDEV
         help
           This enables support for systems based on the Freescale MXC91231 family
 
+config ARCH_MX5
+        bool "MX5-based"
+        select CPU_V7
+        help
+          This enables support for systems based on the Freescale i.MX51 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
@@ -48,12 +53,12 @@ source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
+source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 
 config MXC_IRQ_PRIOR
         bool "Use IRQ priority"
-        depends on ARCH_MXC
         help
           Select this if you want to use prioritized IRQ handling.
           This feature prevents higher priority ISR to be interrupted
@@ -62,9 +67,16 @@ config MXC_IRQ_PRIOR
           requirements for timing.
           Say N here, unless you have a specialized requirement.
 
+config MXC_TZIC
+        bool "Enable TrustZone Interrupt Controller"
+        depends on ARCH_MX51
+        help
+          This will be automatically selected for all processors
+          containing this interrupt controller.
+          Say N here only if you are really sure.
+
 config MXC_PWM
         tristate "Enable PWM driver"
-        depends on ARCH_MXC
         select HAVE_PWM
         help
           Enable support for the i.MX PWM controller(s).
@@ -74,7 +86,9 @@ config MXC_ULPI
 
 config ARCH_HAS_RNGA
         bool
-        depends on ARCH_MXC
+
+config IMX_HAVE_IOMUX_V1
+        bool
 
 config ARCH_MXC_IOMUX_V3
         bool
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 996cbac6932..a72a5e4ca20 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -5,8 +5,12 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
-obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
-obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+obj-$(CONFIG_MXC_TZIC) += tzic.o
+
+obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
+obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
index da6387dcdf2..b62917ca3f9 100644
--- a/arch/arm/plat-mxc/audmux-v1.c
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -50,8 +50,18 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
 
 static int mxc_audmux_v1_init(void)
 {
-        if (cpu_is_mx27() || cpu_is_mx21())
-                audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+#ifdef CONFIG_MACH_MX21
+        if (cpu_is_mx21())
+                audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR);
+        else
+#endif
+#ifdef CONFIG_MACH_MX27
+        if (cpu_is_mx27())
+                audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR);
+        else
+#endif
+                (void)0;
+        
         return 0;
 }
 
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096086f..d983cd6c788 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
@@ -32,6 +33,140 @@ static void __iomem *audmux_base;
 #define MXC_AUDMUX_V2_PTCR(x)           ((x) * 8)
 #define MXC_AUDMUX_V2_PDCR(x)           ((x) * 8 + 4)
 
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+        file->private_data = inode->i_private;
+        return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+        switch (port) {
+        case MX31_AUDMUX_PORT1_SSI0:
+                return "imx-ssi.0";
+        case MX31_AUDMUX_PORT2_SSI1:
+                return "imx-ssi.1";
+        case MX31_AUDMUX_PORT3_SSI_PINS_3:
+                return "SSI3";
+        case MX31_AUDMUX_PORT4_SSI_PINS_4:
+                return "SSI4";
+        case MX31_AUDMUX_PORT5_SSI_PINS_5:
+                return "SSI5";
+        case MX31_AUDMUX_PORT6_SSI_PINS_6:
+                return "SSI6";
+        default:
+                return "UNKNOWN";
+        }
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+                                size_t count, loff_t *ppos)
+{
+        ssize_t ret;
+        char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+        int port = (int)file->private_data;
+        u32 pdcr, ptcr;
+
+        if (!buf)
+                return -ENOMEM;
+
+        if (audmux_clk)
+                clk_enable(audmux_clk);
+
+        ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+        pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+        if (audmux_clk)
+                clk_disable(audmux_clk);
+
+        ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+                       pdcr, ptcr);
+
+        if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+                ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                "TxFS output from %s, ",
+                                audmux_port_string((ptcr >> 27) & 0x7));
+        else
+                ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                "TxFS input, ");
+
+        if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+                ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                "TxClk output from %s",
+                                audmux_port_string((ptcr >> 22) & 0x7));
+        else
+                ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                "TxClk input");
+
+        ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+        if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+                ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                "Port is symmetric");
+        } else {
+                if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+                        ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                        "RxFS output from %s, ",
+                                        audmux_port_string((ptcr >> 17) & 0x7));
+                else
+                        ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                        "RxFS input, ");
+
+                if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+                        ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                        "RxClk output from %s",
+                                        audmux_port_string((ptcr >> 12) & 0x7));
+                else
+                        ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                                        "RxClk input");
+        }
+
+        ret += snprintf(buf + ret, PAGE_SIZE - ret,
+                        "\nData received from %s\n",
+                        audmux_port_string((pdcr >> 13) & 0x7));
+
+        ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+        kfree(buf);
+
+        return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+        .open = audmux_open_file,
+        .read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+        int i;
+        char buf[20];
+
+        audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+        if (!audmux_debugfs_root) {
+                pr_warning("Failed to create AUDMUX debugfs root\n");
+                return;
+        }
+
+        for (i = 1; i < 8; i++) {
+                snprintf(buf, sizeof(buf), "ssi%d", i);
+                if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+                                         (void *)i, &audmux_debugfs_fops))
+                        pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+                                   i);
+        }
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
 int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
                 unsigned int pdcr)
 {
@@ -55,7 +190,10 @@ static int mxc_audmux_v2_init(void)
 {
         int ret;
 
-        if (cpu_is_mx35()) {
+        if (cpu_is_mx31())
+                audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
+
+        else if (cpu_is_mx35()) {
                 audmux_clk = clk_get(NULL, "audmux");
                 if (IS_ERR(audmux_clk)) {
                         ret = PTR_ERR(audmux_clk);
@@ -63,10 +201,10 @@ static int mxc_audmux_v2_init(void)
                                         ret);
                         return ret;
                 }
+                audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
         }
 
-        if (cpu_is_mx31() || cpu_is_mx35())
-                audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+        audmux_debugfs_init();
 
         return 0;
 }
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 9e8fbd57495..323ff8ccc87 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -56,6 +56,7 @@ static void __clk_disable(struct clk *clk)
         __clk_disable(clk->parent);
         __clk_disable(clk->secondary);
 
+        WARN_ON(!clk->usecount);
         if (!(--clk->usecount) && clk->disable)
                 clk->disable(clk);
 }
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 9c1b3f9c4f4..e16014b0d13 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -128,6 +128,18 @@ struct imx_dma_channel {
         int hw_chaining;
 };
 
+static void __iomem *imx_dmav1_baseaddr;
+
+static void imx_dmav1_writel(unsigned val, unsigned offset)
+{
+        __raw_writel(val, imx_dmav1_baseaddr + offset);
+}
+
+static unsigned imx_dmav1_readl(unsigned offset)
+{
+        return __raw_readl(imx_dmav1_baseaddr + offset);
+}
+
 static struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
 static struct clk *dma_clk;
@@ -140,7 +152,6 @@ static int imx_dma_hw_chain(struct imx_dma_channel *imxdma)
                 return 0;
 }
 
-
 /*
  * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
  */
@@ -160,17 +171,17 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
                 imxdma->resbytes -= now;
 
         if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
-                __raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
+                imx_dmav1_writel(sg->dma_address, DMA_DAR(channel));
         else
-                __raw_writel(sg->dma_address, DMA_BASE + DMA_SAR(channel));
+                imx_dmav1_writel(sg->dma_address, DMA_SAR(channel));
 
-        __raw_writel(now, DMA_BASE + DMA_CNTR(channel));
+        imx_dmav1_writel(now, DMA_CNTR(channel));
 
         pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, "
                 "size 0x%08x\n", channel,
-                 __raw_readl(DMA_BASE + DMA_DAR(channel)),
-                 __raw_readl(DMA_BASE + DMA_SAR(channel)),
-                 __raw_readl(DMA_BASE + DMA_CNTR(channel)));
+                 imx_dmav1_readl(DMA_DAR(channel)),
+                 imx_dmav1_readl(DMA_SAR(channel)),
+                 imx_dmav1_readl(DMA_CNTR(channel)));
 
         return now;
 }
@@ -218,27 +229,26 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
                         channel, __func__, (unsigned int)dma_address,
                         dma_length, dev_addr);
 
-                __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-                __raw_writel(dma_address, DMA_BASE + DMA_DAR(channel));
-                __raw_writel(imxdma->ccr_from_device,
-                                DMA_BASE + DMA_CCR(channel));
+                imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+                imx_dmav1_writel(dma_address, DMA_DAR(channel));
+                imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
         } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
                 pr_debug("imxdma%d: %s dma_addressg=0x%08x dma_length=%d "
                         "dev_addr=0x%08x for write\n",
                         channel, __func__, (unsigned int)dma_address,
                         dma_length, dev_addr);
 
-                __raw_writel(dma_address, DMA_BASE + DMA_SAR(channel));
-                __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-                __raw_writel(imxdma->ccr_to_device,
-                                DMA_BASE + DMA_CCR(channel));
+                imx_dmav1_writel(dma_address, DMA_SAR(channel));
+                imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+                imx_dmav1_writel(imxdma->ccr_to_device,
+                                DMA_CCR(channel));
         } else {
                 printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
                        channel);
                 return -EINVAL;
         }
 
-        __raw_writel(dma_length, DMA_BASE + DMA_CNTR(channel));
+        imx_dmav1_writel(dma_length, DMA_CNTR(channel));
 
         return 0;
 }
@@ -316,17 +326,15 @@ imx_dma_setup_sg(int channel,
                         "dev_addr=0x%08x for read\n",
                         channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-                __raw_writel(dev_addr, DMA_BASE + DMA_SAR(channel));
-                __raw_writel(imxdma->ccr_from_device,
-                                DMA_BASE + DMA_CCR(channel));
+                imx_dmav1_writel(dev_addr, DMA_SAR(channel));
+                imx_dmav1_writel(imxdma->ccr_from_device, DMA_CCR(channel));
         } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
                 pr_debug("imxdma%d: %s sg=%p sgcount=%d total length=%d "
                         "dev_addr=0x%08x for write\n",
                         channel, __func__, sg, sgcount, dma_length, dev_addr);
 
-                __raw_writel(dev_addr, DMA_BASE + DMA_DAR(channel));
-                __raw_writel(imxdma->ccr_to_device,
-                                DMA_BASE + DMA_CCR(channel));
+                imx_dmav1_writel(dev_addr, DMA_DAR(channel));
+                imx_dmav1_writel(imxdma->ccr_to_device, DMA_CCR(channel));
         } else {
                 printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
                        channel);
@@ -360,7 +368,7 @@ imx_dma_config_channel(int channel, unsigned int config_port,
         imxdma->ccr_from_device = config_port | (config_mem << 2) | dreq;
         imxdma->ccr_to_device = config_mem | (config_port << 2) | dreq;
 
-        __raw_writel(dmareq, DMA_BASE + DMA_RSSR(channel));
+        imx_dmav1_writel(dmareq, DMA_RSSR(channel));
 
         return 0;
 }
@@ -368,7 +376,7 @@ EXPORT_SYMBOL(imx_dma_config_channel);
 
 void imx_dma_config_burstlen(int channel, unsigned int burstlen)
 {
-        __raw_writel(burstlen, DMA_BASE + DMA_BLR(channel));
+        imx_dmav1_writel(burstlen, DMA_BLR(channel));
 }
 EXPORT_SYMBOL(imx_dma_config_burstlen);
 
@@ -398,7 +406,7 @@ imx_dma_setup_handlers(int channel,
         }
 
         local_irq_save(flags);
-        __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+        imx_dmav1_writel(1 << channel, DMA_DISR);
         imxdma->irq_handler = irq_handler;
         imxdma->err_handler = err_handler;
         imxdma->data = data;
@@ -462,22 +470,21 @@ void imx_dma_enable(int channel)
 
         local_irq_save(flags);
 
-        __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
-        __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) & ~(1 << channel),
-                DMA_BASE + DMA_DIMR);
-        __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) | CCR_CEN |
-                CCR_ACRPT,
-                DMA_BASE + DMA_CCR(channel));
+        imx_dmav1_writel(1 << channel, DMA_DISR);
+        imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) & ~(1 << channel), DMA_DIMR);
+        imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
+                CCR_ACRPT, DMA_CCR(channel));
 
 #ifdef CONFIG_ARCH_MX2
-        if (imxdma->sg && imx_dma_hw_chain(imxdma)) {
+        if ((cpu_is_mx21() || cpu_is_mx27()) &&
+                        imxdma->sg && imx_dma_hw_chain(imxdma)) {
                 imxdma->sg = sg_next(imxdma->sg);
                 if (imxdma->sg) {
                         u32 tmp;
                         imx_dma_sg_next(channel, imxdma->sg);
-                        tmp = __raw_readl(DMA_BASE + DMA_CCR(channel));
-                        __raw_writel(tmp | CCR_RPT | CCR_ACRPT,
-                                DMA_BASE + DMA_CCR(channel));
+                        tmp = imx_dmav1_readl(DMA_CCR(channel));
+                        imx_dmav1_writel(tmp | CCR_RPT | CCR_ACRPT,
+                                DMA_CCR(channel));
                 }
         }
 #endif
@@ -502,11 +509,10 @@ void imx_dma_disable(int channel)
                 del_timer(&imxdma->watchdog);
 
         local_irq_save(flags);
-        __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
-                DMA_BASE + DMA_DIMR);
-        __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
-                DMA_BASE + DMA_CCR(channel));
-        __raw_writel(1 << channel, DMA_BASE + DMA_DISR);
+        imx_dmav1_writel(imx_dmav1_readl(DMA_DIMR) | (1 << channel), DMA_DIMR);
+        imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) & ~CCR_CEN,
+                        DMA_CCR(channel));
+        imx_dmav1_writel(1 << channel, DMA_DISR);
         imxdma->in_use = 0;
         local_irq_restore(flags);
 }
@@ -517,7 +523,7 @@ static void imx_dma_watchdog(unsigned long chno)
 {
         struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
 
-        __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+        imx_dmav1_writel(0, DMA_CCR(chno));
         imxdma->in_use = 0;
         imxdma->sg = NULL;
 
@@ -533,17 +539,17 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
         unsigned int err_mask;
         int errcode;
 
-        disr = __raw_readl(DMA_BASE + DMA_DISR);
+        disr = imx_dmav1_readl(DMA_DISR);
 
-        err_mask = __raw_readl(DMA_BASE + DMA_DBTOSR) |
-                   __raw_readl(DMA_BASE + DMA_DRTOSR) |
-                   __raw_readl(DMA_BASE + DMA_DSESR)  |
-                   __raw_readl(DMA_BASE + DMA_DBOSR);
+        err_mask = imx_dmav1_readl(DMA_DBTOSR) |
+                   imx_dmav1_readl(DMA_DRTOSR) |
+                   imx_dmav1_readl(DMA_DSESR)  |
+                   imx_dmav1_readl(DMA_DBOSR);
 
         if (!err_mask)
                 return IRQ_HANDLED;
 
-        __raw_writel(disr & err_mask, DMA_BASE + DMA_DISR);
+        imx_dmav1_writel(disr & err_mask, DMA_DISR);
 
         for (i = 0; i < IMX_DMA_CHANNELS; i++) {
                 if (!(err_mask & (1 << i)))
@@ -551,20 +557,20 @@ static irqreturn_t dma_err_handler(int irq, void *dev_id)
                 imxdma = &imx_dma_channels[i];
                 errcode = 0;
 
-                if (__raw_readl(DMA_BASE + DMA_DBTOSR) & (1 << i)) {
-                        __raw_writel(1 << i, DMA_BASE + DMA_DBTOSR);
+                if (imx_dmav1_readl(DMA_DBTOSR) & (1 << i)) {
+                        imx_dmav1_writel(1 << i, DMA_DBTOSR);
                         errcode |= IMX_DMA_ERR_BURST;
                 }
-                if (__raw_readl(DMA_BASE + DMA_DRTOSR) & (1 << i)) {
-                        __raw_writel(1 << i, DMA_BASE + DMA_DRTOSR);
+                if (imx_dmav1_readl(DMA_DRTOSR) & (1 << i)) {
+                        imx_dmav1_writel(1 << i, DMA_DRTOSR);
                         errcode |= IMX_DMA_ERR_REQUEST;
                 }
-                if (__raw_readl(DMA_BASE + DMA_DSESR) & (1 << i)) {
-                        __raw_writel(1 << i, DMA_BASE + DMA_DSESR);
+                if (imx_dmav1_readl(DMA_DSESR) & (1 << i)) {
+                        imx_dmav1_writel(1 << i, DMA_DSESR);
                         errcode |= IMX_DMA_ERR_TRANSFER;
                 }
-                if (__raw_readl(DMA_BASE + DMA_DBOSR) & (1 << i)) {
-                        __raw_writel(1 << i, DMA_BASE + DMA_DBOSR);
+                if (imx_dmav1_readl(DMA_DBOSR) & (1 << i)) {
+                        imx_dmav1_writel(1 << i, DMA_DBOSR);
                         errcode |= IMX_DMA_ERR_BUFFER;
                 }
                 if (imxdma->name && imxdma->err_handler) {
@@ -607,7 +613,7 @@ static void dma_irq_handle_channel(int chno)
                 if (imxdma->sg) {
                         imx_dma_sg_next(chno, imxdma->sg);
 
-                        tmp = __raw_readl(DMA_BASE + DMA_CCR(chno));
+                        tmp = imx_dmav1_readl(DMA_CCR(chno));
 
                         if (imx_dma_hw_chain(imxdma)) {
                                 /* FIXME: The timeout should probably be
@@ -617,15 +623,13 @@ static void dma_irq_handle_channel(int chno)
                                         jiffies + msecs_to_jiffies(500));
 
                                 tmp |= CCR_CEN | CCR_RPT | CCR_ACRPT;
-                                __raw_writel(tmp, DMA_BASE +
-                                                DMA_CCR(chno));
+                                imx_dmav1_writel(tmp, DMA_CCR(chno));
                         } else {
-                                __raw_writel(tmp & ~CCR_CEN, DMA_BASE +
-                                                DMA_CCR(chno));
+                                imx_dmav1_writel(tmp & ~CCR_CEN, DMA_CCR(chno));
                                 tmp |= CCR_CEN;
                         }
 
-                        __raw_writel(tmp, DMA_BASE + DMA_CCR(chno));
+                        imx_dmav1_writel(tmp, DMA_CCR(chno));
 
                         if (imxdma->prog_handler)
                                 imxdma->prog_handler(chno, imxdma->data,
@@ -640,7 +644,7 @@ static void dma_irq_handle_channel(int chno)
                 }
         }
 
-        __raw_writel(0, DMA_BASE + DMA_CCR(chno));
+        imx_dmav1_writel(0, DMA_CCR(chno));
         imxdma->in_use = 0;
         if (imxdma->irq_handler)
                 imxdma->irq_handler(chno, imxdma->data);
@@ -651,15 +655,16 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
         int i, disr;
 
 #ifdef CONFIG_ARCH_MX2
-        dma_err_handler(irq, dev_id);
+        if (cpu_is_mx21() || cpu_is_mx27())
+                dma_err_handler(irq, dev_id);
 #endif
 
-        disr = __raw_readl(DMA_BASE + DMA_DISR);
+        disr = imx_dmav1_readl(DMA_DISR);
 
         pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
                      disr);
 
-        __raw_writel(disr, DMA_BASE + DMA_DISR);
+        imx_dmav1_writel(disr, DMA_DISR);
         for (i = 0; i < IMX_DMA_CHANNELS; i++) {
                 if (disr & (1 << i))
                         dma_irq_handle_channel(i);
@@ -699,17 +704,19 @@ int imx_dma_request(int channel, const char *name)
         local_irq_restore(flags); /* request_irq() can block */
 
 #ifdef CONFIG_ARCH_MX2
-        ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
-                        NULL);
-        if (ret) {
-                imxdma->name = NULL;
-                printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
-                                MXC_INT_DMACH0 + channel, channel);
-                return ret;
+        if (cpu_is_mx21() || cpu_is_mx27()) {
+                ret = request_irq(MX2x_INT_DMACH0 + channel,
+                                dma_irq_handler, 0, "DMA", NULL);
+                if (ret) {
+                        imxdma->name = NULL;
+                        pr_crit("Can't register IRQ %d for DMA channel %d\n",
+                                        MX2x_INT_DMACH0 + channel, channel);
+                        return ret;
+                }
+                init_timer(&imxdma->watchdog);
+                imxdma->watchdog.function = &imx_dma_watchdog;
+                imxdma->watchdog.data = channel;
         }
-        init_timer(&imxdma->watchdog);
-        imxdma->watchdog.function = &imx_dma_watchdog;
-        imxdma->watchdog.data = channel;
 #endif
 
         return ret;
@@ -738,7 +745,8 @@ void imx_dma_free(int channel)
         imxdma->name = NULL;
 
 #ifdef CONFIG_ARCH_MX2
-        free_irq(MXC_INT_DMACH0 + channel, NULL);
+        if (cpu_is_mx21() || cpu_is_mx27())
+                free_irq(MX2x_INT_DMACH0 + channel, NULL);
 #endif
 
         local_irq_restore(flags);
@@ -796,34 +804,53 @@ static int __init imx_dma_init(void)
         int ret = 0;
         int i;
 
+#ifdef CONFIG_ARCH_MX1
+        if (cpu_is_mx1())
+                imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
+        else
+#endif
+#ifdef CONFIG_MACH_MX21
+        if (cpu_is_mx21())
+                imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
+        else
+#endif
+#ifdef CONFIG_MACH_MX27
+        if (cpu_is_mx27())
+                imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
+        else
+#endif
+                BUG();
+
         dma_clk = clk_get(NULL, "dma");
         clk_enable(dma_clk);
 
         /* reset DMA module */
-        __raw_writel(DCR_DRST, DMA_BASE + DMA_DCR);
+        imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
 #ifdef CONFIG_ARCH_MX1
-        ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
-        if (ret) {
-                printk(KERN_CRIT "Wow!  Can't register IRQ for DMA\n");
-                return ret;
-        }
+        if (cpu_is_mx1()) {
+                ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
+                if (ret) {
+                        pr_crit("Wow!  Can't register IRQ for DMA\n");
+                        return ret;
+                }
 
-        ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
-        if (ret) {
-                printk(KERN_CRIT "Wow!  Can't register ERRIRQ for DMA\n");
-                free_irq(DMA_INT, NULL);
-                return ret;
+                ret = request_irq(MX1_DMA_ERR, dma_err_handler, 0, "DMA", NULL);
+                if (ret) {
+                        pr_crit("Wow!  Can't register ERRIRQ for DMA\n");
+                        free_irq(MX1_DMA_INT, NULL);
+                        return ret;
+                }
         }
 #endif
         /* enable DMA module */
-        __raw_writel(DCR_DEN, DMA_BASE + DMA_DCR);
+        imx_dmav1_writel(DCR_DEN, DMA_DCR);
 
         /* clear all interrupts */
-        __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DISR);
+        imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DISR);
 
         /* disable interrupts */
-        __raw_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_BASE + DMA_DIMR);
+        imx_dmav1_writel((1 << IMX_DMA_CHANNELS) - 1, DMA_DIMR);
 
         for (i = 0; i < IMX_DMA_CHANNELS; i++) {
                 imx_dma_channels[i].sg = NULL;
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 41599be882e..cb0b6387448 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -25,25 +25,37 @@
 #define USBCTRL_OTGBASE_OFFSET  0x600
 
 #define MX31_OTG_SIC_SHIFT      29
-#define MX31_OTG_SIC_MASK       (0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_SIC_MASK       (0x3 << MX31_OTG_SIC_SHIFT)
 #define MX31_OTG_PM_BIT         (1 << 24)
 
 #define MX31_H2_SIC_SHIFT       21
-#define MX31_H2_SIC_MASK        (0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_SIC_MASK        (0x3 << MX31_H2_SIC_SHIFT)
 #define MX31_H2_PM_BIT          (1 << 16)
 #define MX31_H2_DT_BIT          (1 << 5)
 
 #define MX31_H1_SIC_SHIFT       13
-#define MX31_H1_SIC_MASK        (0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_SIC_MASK        (0x3 << MX31_H1_SIC_SHIFT)
 #define MX31_H1_PM_BIT          (1 << 8)
 #define MX31_H1_DT_BIT          (1 << 4)
 
+#define MX35_OTG_SIC_SHIFT      29
+#define MX35_OTG_SIC_MASK       (0x3 << MX35_OTG_SIC_SHIFT)
+#define MX35_OTG_PM_BIT         (1 << 24)
+
+#define MX35_H1_SIC_SHIFT       21
+#define MX35_H1_SIC_MASK        (0x3 << MX35_H1_SIC_SHIFT)
+#define MX35_H1_PM_BIT          (1 << 8)
+#define MX35_H1_IPPUE_UP_BIT    (1 << 7)
+#define MX35_H1_IPPUE_DOWN_BIT  (1 << 6)
+#define MX35_H1_TLL_BIT         (1 << 5)
+#define MX35_H1_USBTE_BIT       (1 << 4)
+
 int mxc_set_usbcontrol(int port, unsigned int flags)
 {
         unsigned int v;
-
+#ifdef CONFIG_ARCH_MX3
         if (cpu_is_mx31()) {
-                v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+                v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
                                      USBCTRL_OTGBASE_OFFSET));
 
                 switch (port) {
@@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
                         v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
                         v |= (flags & MXC_EHCI_INTERFACE_MASK)
                                         << MX31_OTG_SIC_SHIFT;
-                        if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
                                 v |= MX31_OTG_PM_BIT;
 
                         break;
                 case 1: /* H1 port */
-                        v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+                        v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
                         v |= (flags & MXC_EHCI_INTERFACE_MASK)
                                                 << MX31_H1_SIC_SHIFT;
-                        if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
                                 v |= MX31_H1_PM_BIT;
 
                         if (!(flags & MXC_EHCI_TTL_ENABLED))
@@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 
                         break;
                 case 2: /* H2 port */
-                        v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+                        v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
                         v |= (flags & MXC_EHCI_INTERFACE_MASK)
                                                 << MX31_H2_SIC_SHIFT;
                         if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
@@ -77,13 +89,103 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
                                 v |= MX31_H2_DT_BIT;
 
                         break;
+                default:
+                        return -EINVAL;
                 }
 
-                writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+                writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
                                      USBCTRL_OTGBASE_OFFSET));
                 return 0;
         }
 
+        if (cpu_is_mx35()) {
+                v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+
+                switch (port) {
+                case 0: /* OTG port */
+                        v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                        << MX35_OTG_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX35_OTG_PM_BIT;
+
+                        break;
+                case 1: /* H1 port */
+                        v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
+                                MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                                << MX35_H1_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX35_H1_PM_BIT;
+
+                        if (!(flags & MXC_EHCI_TTL_ENABLED))
+                                v |= MX35_H1_TLL_BIT;
+
+                        if (flags & MXC_EHCI_INTERNAL_PHY)
+                                v |= MX35_H1_USBTE_BIT;
+
+                        if (flags & MXC_EHCI_IPPUE_DOWN)
+                                v |= MX35_H1_IPPUE_DOWN_BIT;
+
+                        if (flags & MXC_EHCI_IPPUE_UP)
+                                v |= MX35_H1_IPPUE_UP_BIT;
+
+                        break;
+                default:
+                        return -EINVAL;
+                }
+
+                writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+                return 0;
+        }
+#endif /* CONFIG_ARCH_MX3 */
+#ifdef CONFIG_MACH_MX27
+        if (cpu_is_mx27()) {
+                /* On i.MX27 we can use the i.MX31 USBCTRL bits, they
+                 * are identical
+                 */
+                v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+                switch (port) {
+                case 0: /* OTG port */
+                        v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                        << MX31_OTG_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX31_OTG_PM_BIT;
+                        break;
+                case 1: /* H1 port */
+                        v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                                << MX31_H1_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX31_H1_PM_BIT;
+
+                        if (!(flags & MXC_EHCI_TTL_ENABLED))
+                                v |= MX31_H1_DT_BIT;
+
+                        break;
+                case 2: /* H2 port */
+                        v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
+                        v |= (flags & MXC_EHCI_INTERFACE_MASK)
+                                                << MX31_H2_SIC_SHIFT;
+                        if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+                                v |= MX31_H2_PM_BIT;
+
+                        if (!(flags & MXC_EHCI_TTL_ENABLED))
+                                v |= MX31_H2_DT_BIT;
+
+                        break;
+                default:
+                        return -EINVAL;
+                }
+                writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+                                     USBCTRL_OTGBASE_OFFSET));
+                return 0;
+        }
+#endif /* CONFIG_MACH_MX27 */
         printk(KERN_WARNING
                 "%s() unable to setup USBCONTROL for this CPU\n", __func__);
         return -EINVAL;
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index d65ebe303b9..70b23893f09 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -140,16 +140,13 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
         val = __raw_readl(reg);
         edge = (val >> (bit << 1)) & 3;
         val &= ~(0x3 << (bit << 1));
-        switch (edge) {
-        case GPIO_INT_HIGH_LEV:
+        if (edge == GPIO_INT_HIGH_LEV) {
                 edge = GPIO_INT_LOW_LEV;
                 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
-                break;
-        case GPIO_INT_LOW_LEV:
+        } else if (edge == GPIO_INT_LOW_LEV) {
                 edge = GPIO_INT_HIGH_LEV;
                 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
-                break;
-        default:
+        } else {
                 pr_err("mxc: invalid configuration for GPIO %d: %x\n",
                        gpio, edge);
                 return;
@@ -157,25 +154,20 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
         __raw_writel(val | (edge << (bit << 1)), reg);
 }
 
-/* handle n interrupts in one status register */
+/* handle 32 interrupts in one status register */
 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 {
-        u32 gpio_irq_no;
+        u32 gpio_irq_no_base = port->virtual_irq_start;
 
-        gpio_irq_no = port->virtual_irq_start;
-        for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
-                u32 gpio = irq_to_gpio(gpio_irq_no);
-
-                if ((irq_stat & 1) == 0)
-                        continue;
+        while (irq_stat != 0) {
+                int irqoffset = fls(irq_stat) - 1;
 
-                BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+                if (port->both_edges & (1 << irqoffset))
+                        mxc_flip_edge(port, irqoffset);
 
-                if (port->both_edges & (1 << (gpio & 31)))
-                        mxc_flip_edge(port, gpio);
+                generic_handle_irq(gpio_irq_no_base + irqoffset);
 
-                irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
-                                &irq_desc[gpio_irq_no]);
+                irq_stat &= ~(1 << irqoffset);
         }
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
index 05ff2f31ef1..93cc66f104c 100644
--- a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -21,19 +21,19 @@
 /*
  *  KZM-ARM11-01 Board Control Registers on FPGA
  */
-#define KZM_ARM11_CTL1          (CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2          (CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1          (CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT    (CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV      (CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED      (CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS          (CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2        (CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1          (MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2          (MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1          (MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT    (MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV      (MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED      (MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS          (MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2        (MX31_CS4_BASE_ADDR + 0x1003)
 
 /*
  * External UART for touch panel on FPGA
  */
-#define KZM_ARM11_16550         (CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550         (MX31_CS4_BASE_ADDR + 0x1050)
 
 #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 2cbfa35e82f..095a199591c 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 
 /* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
 /* PBC Board status register offset */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b638c26..2b2da036757 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
 
 #ifndef __ASSEMBLY__
 
-enum mx31lilly_boards {
+enum mx31lite_boards {
         MX31LITE_NOBOARD        = 0,
         MX31LITE_DB             = 1,
 };
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index d5be6b5a6ac..fc5fec9b55f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -25,6 +25,7 @@ enum mx31moboard_boards {
         MX31NOBOARD     = 0,
         MX31DEVBOARD    = 1,
         MX31MARXBOT     = 2,
+        MX31SMARTBOT    = 3,
 };
 
 /*
@@ -34,6 +35,7 @@ enum mx31moboard_boards {
 
 extern void mx31moboard_devboard_init(void);
 extern void mx31moboard_marxbot_init(void);
+extern void mx31moboard_smartbot_init(void);
 
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 43a82d0c534..753a5988d85 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -26,13 +26,6 @@
 struct module;
 
 struct clk {
-#ifndef CONFIG_COMMON_CLKDEV
-        /* As soon as i.MX1 and i.MX31 switched to clkdev, this
-         * block can go away */
-        struct list_head node;
-        struct module *owner;
-        const char *name;
-#endif
         int id;
         /* Source clock this clk depends on */
         struct clk *parent;
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b0a25..2941472582d 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,22 +20,27 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mx51_map_io(void);
 extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
+extern void tzic_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
 extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mx51_init_irq(void);
 extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
+                        unsigned long ckih1, unsigned long ckih2);
 extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 15b2b148a10..133d66bfb53 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  *
  */
+#define IMX_NEEDS_DEPRECATED_SYMBOLS
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/mx1.h>
@@ -44,13 +45,22 @@
 #define UART_VADDR      AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx51.h>
+#define UART_PADDR      MX51_UART1_BASE_ADDR
+#define UART_VADDR      MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #include <mach/mxc91231.h>
 #define UART_PADDR      MXC91231_UART2_BASE_ADDR
-#define UART_VADDR      MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#define UART_VADDR      MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
                 .macro  addruart,rx
                 mrc     p15, 0, \rx, c1, c0
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 7cf290efe76..aeb08697726 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -1,6 +1,6 @@
 /*
  *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
  */
 
 /*
@@ -18,11 +18,16 @@
         .endm
 
         .macro  get_irqnr_preamble, base, tmp
+#ifndef CONFIG_MXC_TZIC
         ldr     \base, =avic_base
         ldr     \base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
         ldr     r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+        ldr     \base, =tzic_base
+        ldr     \base, [\base]
+#endif /* CONFIG_MXC_TZIC */
         .endm
 
         .macro  arch_ret_to_user, tmp1, tmp2
@@ -32,6 +37,7 @@
         @ and returns its number in irqnr
         @ and returns if an interrupt occured in irqstat
         .macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#ifndef CONFIG_MXC_TZIC
         @ Load offset & priority of the highest priority
         @ interrupt pending from AVIC_NIVECSR
         ldr     \irqstat, [\base, #0x40]
@@ -45,6 +51,32 @@
         strne   \tmp, [\base, #AVIC_NIMASK]
         streq   r4, [\base, #AVIC_NIMASK]
 #endif
+#elif defined CONFIG_MXC_TZIC
+        @ Load offset & priority of the highest priority
+        @ interrupt pending.
+        @ 0xD80 is HIPND0 register
+        mov     \irqnr, #0
+        mov     \irqstat, #0x0D80
+1000:
+        ldr     \tmp,   [\irqstat, \base]
+        cmp     \tmp, #0
+        bne     1001f
+        addeq   \irqnr, \irqnr, #32
+        addeq   \irqstat, \irqstat, #4
+        cmp     \irqnr, #128
+        blo     1000b
+        b       2001f
+1001:   mov     \irqstat, #1
+1002:   tst     \tmp, \irqstat
+        bne     2002f
+        movs    \tmp, \tmp, lsr #1
+        addne   \irqnr, \irqnr, #1
+        bne     1002b
+2001:
+        mov  \irqnr, #0
+2002:
+        movs \irqnr, \irqnr
+#endif
         .endm
 
         @ irq priority table (not used)
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 78db75475f6..ebadf4ac43f 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,6 +22,15 @@
 
 #include <asm/sizes.h>
 
+#define IMX_IO_ADDRESS(addr, module)                                    \
+        ((void __force __iomem *)                                       \
+         (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+         (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
+#ifdef CONFIG_ARCH_MX5
+#include <mach/mx51.h>
+#endif
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1.h b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
index bf23305c19c..6b1507cf378 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1.h
@@ -1,166 +1,155 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX1_H__
+#define __MACH_IOMUX_MX1_H__
 
-#ifndef _MXC_IOMUX_MX1_H
-#define _MXC_IOMUX_MX1_H
+#include <mach/iomux-v1.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
+#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
+#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
+#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
+#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
+#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
+#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
+#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
+#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
+#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
+#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
+#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
+#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
+#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
+#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
+#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
+#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
+#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
+#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
+#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
+#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
+#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
+#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
+#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
+#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
+#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
+#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
+#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
+#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
+#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
+#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
+#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
+#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
+#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
+#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
+#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
+#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
+#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
 
-/* FIXME: This list is not completed. The correct directions are
-* missing on some (many) pins
-*/
-
-
-/* Primary GPIO pin functions */
-
-#define PA0_AIN_SPI2_CLK        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA0_AF_ETMTRACESYNC     (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD       (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1)
-#define PA1_PF_TIN              (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_PWM0             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2)
-#define PA3_PF_CSI_MCLK         (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_CSI_D0           (GPIO_PORTA | GPIO_PF | 4)
-#define PA5_PF_CSI_D1           (GPIO_PORTA | GPIO_PF | 5)
-#define PA6_PF_CSI_D2           (GPIO_PORTA | GPIO_PF | 6)
-#define PA7_PF_CSI_D3           (GPIO_PORTA | GPIO_PF | 7)
-#define PA8_PF_CSI_D4           (GPIO_PORTA | GPIO_PF | 8)
-#define PA9_PF_CSI_D5           (GPIO_PORTA | GPIO_PF | 9)
-#define PA10_PF_CSI_D6          (GPIO_PORTA | GPIO_PF | 10)
-#define PA11_PF_CSI_D7          (GPIO_PORTA | GPIO_PF | 11)
-#define PA12_PF_CSI_VSYNC       (GPIO_PORTA | GPIO_PF | 12)
-#define PA13_PF_CSI_HSYNC       (GPIO_PORTA | GPIO_PF | 13)
-#define PA14_PF_CSI_PIXCLK      (GPIO_PORTA | GPIO_PF | 14)
-#define PA15_PF_I2C_SDA         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_I2C_SCL         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_AF_ETMTRACEPKT4    (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS        (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA18_AF_ETMTRACEPKT5    (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_ETMTRACEPKT6    (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_ETMTRACEPKT7    (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_PF_A0              (GPIO_PORTA | GPIO_PF | 21)
-#define PA22_PF_CS4             (GPIO_PORTA | GPIO_PF | 22)
-#define PA23_PF_CS5             (GPIO_PORTA | GPIO_PF | 23)
-#define PA24_PF_A16             (GPIO_PORTA | GPIO_PF | 24)
-#define PA24_AF_ETMTRACEPKT0    (GPIO_PORTA | GPIO_AF | 24)
-#define PA25_PF_A17             (GPIO_PORTA | GPIO_PF | 25)
-#define PA25_AF_ETMTRACEPKT1    (GPIO_PORTA | GPIO_AF | 25)
-#define PA26_PF_A18             (GPIO_PORTA | GPIO_PF | 26)
-#define PA26_AF_ETMTRACEPKT2    (GPIO_PORTA | GPIO_AF | 26)
-#define PA27_PF_A19             (GPIO_PORTA | GPIO_PF | 27)
-#define PA27_AF_ETMTRACEPKT3    (GPIO_PORTA | GPIO_AF | 27)
-#define PA28_PF_A20             (GPIO_PORTA | GPIO_PF | 28)
-#define PA28_AF_ETMPIPESTAT0    (GPIO_PORTA | GPIO_AF | 28)
-#define PA29_PF_A21             (GPIO_PORTA | GPIO_PF | 29)
-#define PA29_AF_ETMPIPESTAT1    (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_PF_A22             (GPIO_PORTA | GPIO_PF | 30)
-#define PA30_AF_ETMPIPESTAT2    (GPIO_PORTA | GPIO_AF | 30)
-#define PA31_PF_A23             (GPIO_PORTA | GPIO_PF | 31)
-#define PA31_AF_ETMTRACECLK     (GPIO_PORTA | GPIO_AF | 31)
-#define PB8_PF_SD_DAT0          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
-#define PB8_AF_MS_PIO           (GPIO_PORTB | GPIO_AF | 8)
-#define PB9_PF_SD_DAT1          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9)
-#define PB9_AF_MS_PI1           (GPIO_PORTB | GPIO_AF | 9)
-#define PB10_PF_SD_DAT2         (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10)
-#define PB10_AF_MS_SCLKI        (GPIO_PORTB | GPIO_AF | 10)
-#define PB11_PF_SD_DAT3         (GPIO_PORTB | GPIO_PF | 11)
-#define PB11_AF_MS_SDIO         (GPIO_PORTB | GPIO_AF | 11)
-#define PB12_PF_SD_CLK          (GPIO_PORTB | GPIO_PF | 12)
-#define PB12_AF_MS_SCLK0        (GPIO_PORTB | GPIO_AF | 12)
-#define PB13_PF_SD_CMD          (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
-#define PB13_AF_MS_BS           (GPIO_PORTB | GPIO_AF | 13)
-#define PB14_AF_SSI_RXFS        (GPIO_PORTB | GPIO_AF | 14)
-#define PB15_AF_SSI_RXCLK       (GPIO_PORTB | GPIO_AF | 15)
-#define PB16_AF_SSI_RXDAT       (GPIO_PORTB | GPIO_AF | GPIO_IN | 16)
-#define PB17_AF_SSI_TXDAT       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17)
-#define PB18_AF_SSI_TXFS        (GPIO_PORTB | GPIO_AF | 18)
-#define PB19_AF_SSI_TXCLK       (GPIO_PORTB | GPIO_AF | 19)
-#define PB20_PF_USBD_AFE        (GPIO_PORTB | GPIO_PF | 20)
-#define PB21_PF_USBD_OE         (GPIO_PORTB | GPIO_PF | 21)
-#define PB22_PF_USBD_RCV        (GPIO_PORTB | GPIO_PF | 22)
-#define PB23_PF_USBD_SUSPND     (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USBD_VP         (GPIO_PORTB | GPIO_PF | 24)
-#define PB25_PF_USBD_VM         (GPIO_PORTB | GPIO_PF | 25)
-#define PB26_PF_USBD_VPO        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBD_VMO        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_UART2_CTS       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28)
-#define PB29_PF_UART2_RTS       (GPIO_PORTB | GPIO_PF | GPIO_IN | 29)
-#define PB30_PF_UART2_TXD       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30)
-#define PB31_PF_UART2_RXD       (GPIO_PORTB | GPIO_PF | GPIO_IN | 31)
-#define PC3_PF_SSI_RXFS         (GPIO_PORTC | GPIO_PF | 3)
-#define PC4_PF_SSI_RXCLK        (GPIO_PORTC | GPIO_PF | 4)
-#define PC5_PF_SSI_RXDAT        (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_SSI_TXDAT        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6)
-#define PC7_PF_SSI_TXFS         (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_SSI_TXCLK        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_UART1_CTS        (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_UART1_RTS       (GPIO_PORTC | GPIO_PF | GPIO_IN | 10)
-#define PC11_PF_UART1_TXD       (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_UART1_RXD       (GPIO_PORTC | GPIO_PF | GPIO_IN | 12)
-#define PC13_PF_SPI1_SPI_RDY    (GPIO_PORTC | GPIO_PF | 13)
-#define PC14_PF_SPI1_SCLK       (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_SPI1_SS         (GPIO_PORTC | GPIO_PF | 15)
-#define PC16_PF_SPI1_MISO       (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SPI1_MOSI       (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI       (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24)
-#define PC25_BIN_UART3_DSR      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25)
-#define PC26_AOUT_UART3_DTR     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27)
-#define PC28_BIN_UART3_CTS      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28)
-#define PC29_AOUT_UART3_RTS     (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX       (GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31)
-#define PD6_PF_LSCLK            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6)
-#define PD7_PF_REV              (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR        (GPIO_PORTD | GPIO_AF | GPIO_IN | 7)
-#define PD7_AIN_SPI2_SCLK       (GPIO_PORTD | GPIO_AIN | 7)
-#define PD8_PF_CLS              (GPIO_PORTD | GPIO_PF | 8)
-#define PD8_AF_UART2_DCD        (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8)
-#define PD8_AIN_SPI2_SS         (GPIO_PORTD | GPIO_AIN | 8)
-#define PD9_PF_PS               (GPIO_PORTD | GPIO_PF | 9)
-#define PD9_AF_UART2_RI         (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9)
-#define PD9_AOUT_SPI2_RXD       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9)
-#define PD10_PF_SPL_SPR         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10)
-#define PD10_AF_UART2_DSR       (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10)
-#define PD10_AIN_SPI2_TXD       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10)
-#define PD11_PF_CONTRAST        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11)
-#define PD12_PF_ACD_OE          (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12)
-#define PD13_PF_LP_HSYNC        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13)
-#define PD14_PF_FLM_VSYNC       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14)
-#define PD15_PF_LD0             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15)
-#define PD16_PF_LD1             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16)
-#define PD17_PF_LD2             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_LD3             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_LD4             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19)
-#define PD20_PF_LD5             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20)
-#define PD21_PF_LD6             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21)
-#define PD22_PF_LD7             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22)
-#define PD23_PF_LD8             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23)
-#define PD24_PF_LD9             (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24)
-#define PD25_PF_LD10            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_LD11            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_LD12            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_LD13            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_LD14            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_LD15            (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30)
-#define PD31_PF_TMR2OUT         (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD       (GPIO_PORTD | GPIO_BIN | 31)
-
-
-#endif
+#endif /* ifndef __MACH_IOMUX_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx21.h b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
index 63aaa972e27..1495dfda783 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx21.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx21.h
@@ -1,126 +1,122 @@
 /*
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX21_H
-#define _MXC_IOMUX_MX21_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX21_H__
+#define __MACH_IOMUX_MX21_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
-#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
-#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
-#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
-#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
-#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
-#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
-#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
-#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
-#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
-#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
-#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
-#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
-#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
-#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
-#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
-#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
+#define PB22_PF_USBH1_BYP       (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_ON        (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_USBOTG_SDA       (GPIO_PORTC | GPIO_PF | 5)
+#define PC6_PF_USBOTG_SCL       (GPIO_PORTC | GPIO_PF | 6)
+#define PC7_PF_USBOTG_ON        (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_USBOTG_FS        (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_USBOTG_OE        (GPIO_PORTC | GPIO_PF | 9)
+#define PC10_PF_USBOTG_TXDM     (GPIO_PORTC | GPIO_PF | 10)
+#define PC11_PF_USBOTG_TXDP     (GPIO_PORTC | GPIO_PF | 11)
+#define PC12_PF_USBOTG_RXDM     (GPIO_PORTC | GPIO_PF | 12)
+#define PC13_PF_USBOTG_RXDP     (GPIO_PORTC | GPIO_PF | 13)
+#define PC16_PF_SAP_FS          (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SAP_RXD         (GPIO_PORTC | GPIO_PF | 17)
+#define PC18_PF_SAP_TXD         (GPIO_PORTC | GPIO_PF | 18)
+#define PC19_PF_SAP_CLK         (GPIO_PORTC | GPIO_PF | 19)
+#define PE0_PF_TEST_WB2         (GPIO_PORTE | GPIO_PF | 0)
+#define PE1_PF_TEST_WB1         (GPIO_PORTE | GPIO_PF | 1)
+#define PE2_PF_TEST_WB0         (GPIO_PORTE | GPIO_PF | 2)
+#define PF1_PF_NFCE             (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_NFIO0            (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_NFIO1            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_NFIO2            (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_NFIO3           (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_NFIO4           (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_NFIO5           (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_NFIO6           (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_NFIO7           (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_RES             (GPIO_PORTF | GPIO_PF | 16)
 
 /* Alternate GPIO pin functions */
 
-#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
-#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
-#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
-#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
-#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
-#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
-#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
-#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
-#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
-#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
-#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
-#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
-#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
-#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
-#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
-#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
-#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
-#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
-#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
-#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
-#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
+#define PA5_AF_BMI_CLK_CS       (GPIO_PORTA | GPIO_AF | 5)
+#define PA6_AF_BMI_D0           (GPIO_PORTA | GPIO_AF | 6)
+#define PA7_AF_BMI_D1           (GPIO_PORTA | GPIO_AF | 7)
+#define PA8_AF_BMI_D2           (GPIO_PORTA | GPIO_AF | 8)
+#define PA9_AF_BMI_D3           (GPIO_PORTA | GPIO_AF | 9)
+#define PA10_AF_BMI_D4          (GPIO_PORTA | GPIO_AF | 10)
+#define PA11_AF_BMI_D5          (GPIO_PORTA | GPIO_AF | 11)
+#define PA12_AF_BMI_D6          (GPIO_PORTA | GPIO_AF | 12)
+#define PA13_AF_BMI_D7          (GPIO_PORTA | GPIO_AF | 13)
+#define PA14_AF_BMI_D8          (GPIO_PORTA | GPIO_AF | 14)
+#define PA15_AF_BMI_D9          (GPIO_PORTA | GPIO_AF | 15)
+#define PA16_AF_BMI_D10         (GPIO_PORTA | GPIO_AF | 16)
+#define PA17_AF_BMI_D11         (GPIO_PORTA | GPIO_AF | 17)
+#define PA18_AF_BMI_D12         (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_BMI_D13         (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_BMI_D14         (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_AF_BMI_D15         (GPIO_PORTA | GPIO_AF | 21)
+#define PA22_AF_BMI_READ_REQ    (GPIO_PORTA | GPIO_AF | 22)
+#define PA23_AF_BMI_WRITE       (GPIO_PORTA | GPIO_AF | 23)
+#define PA29_AF_BMI_RX_FULL     (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_AF_BMI_READ        (GPIO_PORTA | GPIO_AF | 30)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
-#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
-#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
-#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
-#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
-#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
-#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
-#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
-#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
-#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
-#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
+#define PC14_AIN_SYS_CLK        (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PD21_AIN_USBH2_FS       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 21)
+#define PD22_AIN_USBH2_OE       (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 22)
+#define PD23_AIN_USBH2_TXDM     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 23)
+#define PD24_AIN_USBH2_TXDP     (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 24)
+#define PE8_AIN_IR_TXD          (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 8)
+#define PF0_AIN_PC_RST          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 0)
+#define PF1_AIN_PC_CE1          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 1)
+#define PF2_AIN_PC_CE2          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 2)
+#define PF3_AIN_PC_POE          (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 3)
+#define PF4_AIN_PC_OE           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 4)
+#define PF5_AIN_PC_RW           (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
-#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
+#define PC14_BIN_SYS_CLK        (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PD27_BIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_BIN | GPIO_OUT | 27)
 
 /* CIN GPIO pin functions */
 
-#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
+#define PB26_CIN_USBH1_RXDAT    (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 26)
 
 /* AOUT GPIO pin functions */
 
-#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
-#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
-#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
-#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
-#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
-#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
-#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
-#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
-#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
-#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
-#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
-#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
-#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
-#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
-#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
-
-
-#endif
+#define PA29_AOUT_BMI_WAIT      (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 29)
+#define PD19_AOUT_USBH2_RXDM    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 19)
+#define PD20_AOUT_USBH2_RXDP    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 20)
+#define PD25_AOUT_EXT_DMAREQ    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 25)
+#define PD26_AOUT_USBOTG_RXDAT  (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 26)
+#define PE9_AOUT_IR_RXD         (GPIO_PORTE | GPIO_AOUT | GPIO_IN | 9)
+#define PF6_AOUT_PC_BVD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 6)
+#define PF7_AOUT_PC_BVD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 7)
+#define PF8_AOUT_PC_VS2         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 8)
+#define PF9_AOUT_PC_VS1         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 9)
+#define PF10_AOUT_PC_WP         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 10)
+#define PF11_AOUT_PC_READY      (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 11)
+#define PF12_AOUT_PC_WAIT       (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 12)
+#define PF13_AOUT_PC_CD2        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 13)
+#define PF14_AOUT_PC_CD1        (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 14)
+
+#endif /* ifndef __MACH_IOMUX_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 9af494f0ab3..f39220d1b67 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -7,7 +7,7 @@
  *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
  * and
  * arch/arm/plat-mxc/include/mach/iomux-mx35.h
- *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *    Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -16,24 +16,11 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#ifndef __IOMUX_MX25_H__
-#define __IOMUX_MX25_H__
+#ifndef __MACH_IOMUX_MX25_H__
+#define __MACH_IOMUX_MX25_H__
 
 #include <mach/iomux-v3.h>
 
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
-/*
- *
- * @brief MX25 I/O Pin List
- *
- * @ingroup GPIO_MX25
- */
-
-#ifndef __ASSEMBLY__
-
 /*
  * IOMUX/PAD Bit field definitions
  */
@@ -462,9 +449,11 @@
 #define MX25_PAD_GPIO_C__CAN2_TX        IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_D__GPIO_D         IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__LD16           IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_D__CAN2_RX        IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
 
 #define MX25_PAD_GPIO_E__GPIO_E         IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__LD17           IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_GPIO_E__AUD7_TXD       IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_GPIO_F__GPIO_F         IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
@@ -513,5 +502,4 @@
 #define MX25_PAD_CTL_GRP_DVS_SDHC1      IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CTL_GRP_DVS_LCD        IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
 
-#endif // __ASSEMBLY__
-#endif // __IOMUX_MX25_H__
+#endif /* __MACH_IOMUX_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx27.h b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
index 5ac158b70f6..d9f9a6e32d8 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx27.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx27.h
@@ -1,207 +1,205 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX27_H
-#define _MXC_IOMUX_MX27_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX27_H__
+#define __MACH_IOMUX_MX27_H__
+
+#include <mach/iomux-mx2x.h>
+#include <mach/iomux-v1.h>
 
 /* Primary GPIO pin functions */
 
-#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
-#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
-#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
-#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
-#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
-#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
-#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
-#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
-#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
-#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
-#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
-#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
-#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
-#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
-#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
-#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
-#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
-#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
-#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
-#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
-#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
-#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
-#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
-#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
-#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
-#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
-#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
-#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
-#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
-#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
-#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
-#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
-#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
-#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
-#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
-#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
-#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
-#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
-#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
-#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
-#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
-#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
-#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
-#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
-#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
-#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
-#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
-#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
-#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
-#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
-#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
-#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
-#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
-#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
-#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
-#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
-#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
-#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
-#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
-#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
+#define PA0_PF_USBH2_CLK        (GPIO_PORTA | GPIO_PF | 0)
+#define PA1_PF_USBH2_DIR        (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_USBH2_DATA7      (GPIO_PORTA | GPIO_PF | 2)
+#define PA3_PF_USBH2_NXT        (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_USBH2_STP        (GPIO_PORTA | GPIO_PF | 4)
+#define PB22_PF_USBH1_SUSP      (GPIO_PORTB | GPIO_PF | 22)
+#define PB25_PF_USBH1_RCV       (GPIO_PORTB | GPIO_PF | 25)
+#define PC5_PF_I2C2_SDA         (GPIO_PORTC | GPIO_PF | GPIO_IN | 5)
+#define PC6_PF_I2C2_SCL         (GPIO_PORTC | GPIO_PF | GPIO_IN | 6)
+#define PC7_PF_USBOTG_DATA5     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 7)
+#define PC8_PF_USBOTG_DATA6     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 8)
+#define PC9_PF_USBOTG_DATA0     (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9)
+#define PC10_PF_USBOTG_DATA2    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 10)
+#define PC11_PF_USBOTG_DATA1    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11)
+#define PC12_PF_USBOTG_DATA4    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 12)
+#define PC13_PF_USBOTG_DATA3    (GPIO_PORTC | GPIO_PF | GPIO_OUT | 13)
+#define PC16_PF_SSI4_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 16)
+#define PC17_PF_SSI4_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 17)
+#define PC18_PF_SSI4_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 18)
+#define PC19_PF_SSI4_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 19)
+#define PD0_PF_SD3_CMD          (GPIO_PORTD | GPIO_PF | 0)
+#define PD1_PF_SD3_CLK          (GPIO_PORTD | GPIO_PF | 1)
+#define PD2_PF_ATA_DATA0        (GPIO_PORTD | GPIO_PF | 2)
+#define PD3_PF_ATA_DATA1        (GPIO_PORTD | GPIO_PF | 3)
+#define PD4_PF_ATA_DATA2        (GPIO_PORTD | GPIO_PF | 4)
+#define PD5_PF_ATA_DATA3        (GPIO_PORTD | GPIO_PF | 5)
+#define PD6_PF_ATA_DATA4        (GPIO_PORTD | GPIO_PF | 6)
+#define PD7_PF_ATA_DATA5        (GPIO_PORTD | GPIO_PF | 7)
+#define PD8_PF_ATA_DATA6        (GPIO_PORTD | GPIO_PF | 8)
+#define PD9_PF_ATA_DATA7        (GPIO_PORTD | GPIO_PF | 9)
+#define PD10_PF_ATA_DATA8       (GPIO_PORTD | GPIO_PF | 10)
+#define PD11_PF_ATA_DATA9       (GPIO_PORTD | GPIO_PF | 11)
+#define PD12_PF_ATA_DATA10      (GPIO_PORTD | GPIO_PF | 12)
+#define PD13_PF_ATA_DATA11      (GPIO_PORTD | GPIO_PF | 13)
+#define PD14_PF_ATA_DATA12      (GPIO_PORTD | GPIO_PF | 14)
+#define PD15_PF_ATA_DATA13      (GPIO_PORTD | GPIO_PF | 15)
+#define PD16_PF_ATA_DATA14      (GPIO_PORTD | GPIO_PF | 16)
+#define PE0_PF_USBOTG_NXT       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 0)
+#define PE1_PF_USBOTG_STP       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 1)
+#define PE2_PF_USBOTG_DIR       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 2)
+#define PE24_PF_USBOTG_CLK      (GPIO_PORTE | GPIO_PF | GPIO_OUT | 24)
+#define PE25_PF_USBOTG_DATA7    (GPIO_PORTE | GPIO_PF | GPIO_OUT | 25)
+#define PF1_PF_NFCLE            (GPIO_PORTF | GPIO_PF | 1)
+#define PF3_PF_NFCE             (GPIO_PORTF | GPIO_PF | 3)
+#define PF7_PF_PC_POE           (GPIO_PORTF | GPIO_PF | 7)
+#define PF8_PF_PC_RW            (GPIO_PORTF | GPIO_PF | 8)
+#define PF9_PF_PC_IOIS16        (GPIO_PORTF | GPIO_PF | 9)
+#define PF10_PF_PC_RST          (GPIO_PORTF | GPIO_PF | 10)
+#define PF11_PF_PC_BVD2         (GPIO_PORTF | GPIO_PF | 11)
+#define PF12_PF_PC_BVD1         (GPIO_PORTF | GPIO_PF | 12)
+#define PF13_PF_PC_VS2          (GPIO_PORTF | GPIO_PF | 13)
+#define PF14_PF_PC_VS1          (GPIO_PORTF | GPIO_PF | 14)
+#define PF16_PF_PC_PWRON        (GPIO_PORTF | GPIO_PF | 16)
+#define PF17_PF_PC_READY        (GPIO_PORTF | GPIO_PF | 17)
+#define PF18_PF_PC_WAIT         (GPIO_PORTF | GPIO_PF | 18)
+#define PF19_PF_PC_CD2          (GPIO_PORTF | GPIO_PF | 19)
+#define PF20_PF_PC_CD1          (GPIO_PORTF | GPIO_PF | 20)
+#define PF23_PF_ATA_DATA15      (GPIO_PORTF | GPIO_PF | 23)
 
 /* Alternate GPIO pin functions */
 
-#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
-#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
-#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
-#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
-#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
-#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
-#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
-#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
-#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
-#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
-#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
-#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
-#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
-#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
-#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
-#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
-#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
-#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
-#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
-#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
-#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
-#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
-#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
-#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
-#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
-#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
-#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
-#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
-#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
-#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
-#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
-#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
-#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
-#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
-#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
-#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
-#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
-#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
-#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
-#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
-#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
-#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
-#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
-#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
-#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
-#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
-#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
-#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
-#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
-#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
-#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
-#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
+#define PB4_AF_MSHC_DATA0       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 4)
+#define PB5_AF_MSHC_DATA1       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 5)
+#define PB6_AF_MSHC_DATA2       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 6)
+#define PB7_AF_MSHC_DATA4       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 7)
+#define PB8_AF_MSHC_BS          (GPIO_PORTB | GPIO_AF | GPIO_OUT | 8)
+#define PB9_AF_MSHC_SCLK        (GPIO_PORTB | GPIO_AF | GPIO_OUT | 9)
+#define PB10_AF_UART6_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 10)
+#define PB11_AF_UART6_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 11)
+#define PB12_AF_UART6_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 12)
+#define PB13_AF_UART6_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 13)
+#define PB18_AF_UART5_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 18)
+#define PB19_AF_UART5_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 19)
+#define PB20_AF_UART5_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 20)
+#define PB21_AF_UART5_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 21)
+#define PC8_AF_FEC_MDIO         (GPIO_PORTC | GPIO_AF | GPIO_IN | 8)
+#define PC24_AF_GPT5_TOUT       (GPIO_PORTC | GPIO_AF | 24)
+#define PC25_AF_GPT5_TIN        (GPIO_PORTC | GPIO_AF | 25)
+#define PC26_AF_GPT4_TOUT       (GPIO_PORTC | GPIO_AF | 26)
+#define PC27_AF_GPT4_TIN        (GPIO_PORTC | GPIO_AF | 27)
+#define PD1_AF_ETMTRACE_PKT15   (GPIO_PORTD | GPIO_AF | 1)
+#define PD6_AF_ETMTRACE_PKT14   (GPIO_PORTD | GPIO_AF | 6)
+#define PD7_AF_ETMTRACE_PKT13   (GPIO_PORTD | GPIO_AF | 7)
+#define PD9_AF_ETMTRACE_PKT12   (GPIO_PORTD | GPIO_AF | 9)
+#define PD2_AF_SD3_D0           (GPIO_PORTD | GPIO_AF | 2)
+#define PD3_AF_SD3_D1           (GPIO_PORTD | GPIO_AF | 3)
+#define PD4_AF_SD3_D2           (GPIO_PORTD | GPIO_AF | 4)
+#define PD5_AF_SD3_D3           (GPIO_PORTD | GPIO_AF | 5)
+#define PD8_AF_FEC_MDIO         (GPIO_PORTD | GPIO_AF | GPIO_IN | 8)
+#define PD10_AF_ETMTRACE_PKT11  (GPIO_PORTD | GPIO_AF | 10)
+#define PD11_AF_ETMTRACE_PKT10  (GPIO_PORTD | GPIO_AF | 11)
+#define PD12_AF_ETMTRACE_PKT9   (GPIO_PORTD | GPIO_AF | 12)
+#define PD13_AF_ETMTRACE_PKT8   (GPIO_PORTD | GPIO_AF | 13)
+#define PD14_AF_ETMTRACE_PKT7   (GPIO_PORTD | GPIO_AF | 14)
+#define PD15_AF_ETMTRACE_PKT6   (GPIO_PORTD | GPIO_AF | 15)
+#define PD16_AF_ETMTRACE_PKT5   (GPIO_PORTD | GPIO_AF | 16)
+#define PF1_AF_ETMTRACE_PKT0    (GPIO_PORTF | GPIO_AF | 1)
+#define PF3_AF_ETMTRACE_PKT2    (GPIO_PORTF | GPIO_AF | 3)
+#define PF5_AF_ETMPIPESTAT11    (GPIO_PORTF | GPIO_AF | 5)
+#define PF7_AF_ATA_BUFFER_EN    (GPIO_PORTF | GPIO_AF | 7)
+#define PF8_AF_ATA_IORDY        (GPIO_PORTF | GPIO_AF | 8)
+#define PF9_AF_ATA_INTRQ        (GPIO_PORTF | GPIO_AF | 9)
+#define PF10_AF_ATA_RESET       (GPIO_PORTF | GPIO_AF | 10)
+#define PF11_AF_ATA_DMACK       (GPIO_PORTF | GPIO_AF | 11)
+#define PF12_AF_ATA_DMAREQ      (GPIO_PORTF | GPIO_AF | 12)
+#define PF13_AF_ATA_DA0         (GPIO_PORTF | GPIO_AF | 13)
+#define PF14_AF_ATA_DA1         (GPIO_PORTF | GPIO_AF | 14)
+#define PF15_AF_ETMTRACE_SYNC   (GPIO_PORTF | GPIO_AF | 15)
+#define PF16_AF_ATA_DA2         (GPIO_PORTF | GPIO_AF | 16)
+#define PF17_AF_ATA_CS0         (GPIO_PORTF | GPIO_AF | 17)
+#define PF18_AF_ATA_CS1         (GPIO_PORTF | GPIO_AF | 18)
+#define PF19_AF_ATA_DIOW        (GPIO_PORTF | GPIO_AF | 19)
+#define PF20_AF_ATA_DIOR        (GPIO_PORTF | GPIO_AF | 20)
+#define PF22_AF_ETMTRACE_CLK    (GPIO_PORTF | GPIO_AF | 22)
+#define PF23_AF_ETMTRACE_PKT4   (GPIO_PORTF | GPIO_AF | 23)
 
 /* AIN GPIO pin functions */
 
-#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
-#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
-#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
-#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
-#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
-#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
-#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
-#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
-#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
-#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
+#define PC14_AIN_SSI1_MCLK      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 14)
+#define PC15_AIN_GPT6_TOUT      (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 15)
+#define PD0_AIN_FEC_TXD0        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 0)
+#define PD1_AIN_FEC_TXD1        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 1)
+#define PD2_AIN_FEC_TXD2        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 2)
+#define PD3_AIN_FEC_TXD3        (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 3)
+#define PD9_AIN_FEC_MDC         (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 9)
+#define PD16_AIN_FEC_TX_ER      (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 16)
+#define PD27_AIN_EXT_DMA_GRANT  (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 27)
+#define PF23_AIN_FEC_TX_EN      (GPIO_PORTF | GPIO_AIN | GPIO_OUT | 23)
 
 /* BIN GPIO pin functions */
 
-#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
+#define PC14_BIN_SSI2_MCLK      (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 14)
 
 /* CIN GPIO pin functions */
 
-#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
-#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
-#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
-#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
-#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
-#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
-#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
-#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
-#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
-#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
-#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
-#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
-#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
-#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
-#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
-#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
-#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
+#define PD2_CIN_SLCDC1_DAT0     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 2)
+#define PD3_CIN_SLCDC1_DAT1     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 3)
+#define PD4_CIN_SLCDC1_DAT2     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 4)
+#define PD5_CIN_SLCDC1_DAT3     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 5)
+#define PD6_CIN_SLCDC1_DAT4     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 6)
+#define PD7_CIN_SLCDC1_DAT5     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 7)
+#define PD8_CIN_SLCDC1_DAT6     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 8)
+#define PD9_CIN_SLCDC1_DAT7     (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 9)
+#define PD10_CIN_SLCDC1_DAT8    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 10)
+#define PD11_CIN_SLCDC1_DAT9    (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 11)
+#define PD12_CIN_SLCDC1_DAT10   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 12)
+#define PD13_CIN_SLCDC1_DAT11   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 13)
+#define PD14_CIN_SLCDC1_DAT12   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 14)
+#define PD15_CIN_SLCDC1_DAT13   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 15)
+#define PD16_CIN_SLCDC1_DAT14   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 16)
+#define PD23_CIN_SLCDC1_DAT15   (GPIO_PORTD | GPIO_CIN | GPIO_OUT | 23)
+#define PF27_CIN_EXT_DMA_GRANT  (GPIO_PORTF | GPIO_CIN | GPIO_OUT | 27)
 /* LCDC_TESTx on PBxx omitted, because it's not clear what they do */
 
 /* AOUT GPIO pin functions */
 
-#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
-#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
-#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
-#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
-#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
-#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
-#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
-#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
-#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
-#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
-#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
-
-#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
-#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
-#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
-#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
-#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
-#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
-#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
-
-
-#endif /* _MXC_GPIO_MX1_MX2_H */
+#define PC14_AOUT_GPT6_TIN      (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 14)
+#define PD4_AOUT_FEC_RX_ER      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 4)
+#define PD5_AOUT_FEC_RXD1       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 5)
+#define PD6_AOUT_FEC_RXD2       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 6)
+#define PD7_AOUT_FEC_RXD3       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 7)
+#define PD10_AOUT_FEC_CRS       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 10)
+#define PD11_AOUT_FEC_TX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 11)
+#define PD12_AOUT_FEC_RXD0      (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 12)
+#define PD13_AOUT_FEC_RX_DV     (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 13)
+#define PD14_AOUT_FEC_RX_CLK    (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 14)
+#define PD15_AOUT_FEC_COL       (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 15)
+
+/* BOUT GPIO pin functions */
+
+#define PC17_BOUT_PC_IOIS16     (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 17)
+#define PC18_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 18)
+#define PC19_BOUT_PC_BVD1       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 19)
+#define PC28_BOUT_PC_BVD2       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 28)
+#define PC29_BOUT_PC_VS1        (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 29)
+#define PC30_BOUT_PC_READY      (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 30)
+#define PC31_BOUT_PC_WAIT       (GPIO_PORTC | GPIO_BOUT | GPIO_IN | 31)
+
+#endif /* __MACH_IOMUX_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
index fb5ae638e79..c4f116d214f 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx2x.h
@@ -1,237 +1,230 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_MX2x_H
-#define _MXC_IOMUX_MX2x_H
-
-#ifndef GPIO_PORTA
-#error Please include mach/iomux.h
-#endif
-
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_MX2x_H__
+#define __MACH_IOMUX_MX2x_H__
 
 /* Primary GPIO pin functions */
 
-#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
-#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
-#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
-#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
-#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
-#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
-#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
-#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
-#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
-#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
-#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
-#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
-#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
-#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
-#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
-#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
-#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
-#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
-#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
-#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
-#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
-#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
-#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
-#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
-#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
-#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
-#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
-#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
-#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
-#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
-#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
-#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
-#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
-#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
-#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
-#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
-#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
-#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
-#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
-#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
-#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
-#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
-#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
-#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
-#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
-#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
-#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
-#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
-#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
-#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
-#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
-#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
-#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
-#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
-#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
-#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
-#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
-#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
-#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
-#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
-#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
-#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
-#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
-#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
-#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
-#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
-#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
-#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
-#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
-#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
-#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
-#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
-#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
-#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
-#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
-#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
-#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
-#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
-#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
-#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
-#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
-#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
-#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
-#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
-#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
-#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
-#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
-#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
-#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
-#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
-#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
-#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
-#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
-#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
-#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
-#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
-#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
-#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
-#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
-#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
-#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
-#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
-#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
-#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
-#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
-#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
-#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
-#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
-#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
-#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
-#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
+#define PA5_PF_LSCLK            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 5)
+#define PA6_PF_LD0              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 6)
+#define PA7_PF_LD1              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 7)
+#define PA8_PF_LD2              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 8)
+#define PA9_PF_LD3              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 9)
+#define PA10_PF_LD4             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 10)
+#define PA11_PF_LD5             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 11)
+#define PA12_PF_LD6             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 12)
+#define PA13_PF_LD7             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 13)
+#define PA14_PF_LD8             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 14)
+#define PA15_PF_LD9             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15)
+#define PA16_PF_LD10            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16)
+#define PA17_PF_LD11            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 17)
+#define PA18_PF_LD12            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 18)
+#define PA19_PF_LD13            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 19)
+#define PA20_PF_LD14            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 20)
+#define PA21_PF_LD15            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 21)
+#define PA22_PF_LD16            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 22)
+#define PA23_PF_LD17            (GPIO_PORTA | GPIO_PF | GPIO_OUT | 23)
+#define PA24_PF_REV             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 24)
+#define PA25_PF_CLS             (GPIO_PORTA | GPIO_PF | GPIO_OUT | 25)
+#define PA26_PF_PS              (GPIO_PORTA | GPIO_PF | GPIO_OUT | 26)
+#define PA27_PF_SPL_SPR         (GPIO_PORTA | GPIO_PF | GPIO_OUT | 27)
+#define PA28_PF_HSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 28)
+#define PA29_PF_VSYNC           (GPIO_PORTA | GPIO_PF | GPIO_OUT | 29)
+#define PA30_PF_CONTRAST        (GPIO_PORTA | GPIO_PF | GPIO_OUT | 30)
+#define PA31_PF_OE_ACD          (GPIO_PORTA | GPIO_PF | GPIO_OUT | 31)
+#define PB4_PF_SD2_D0           (GPIO_PORTB | GPIO_PF | 4)
+#define PB5_PF_SD2_D1           (GPIO_PORTB | GPIO_PF | 5)
+#define PB6_PF_SD2_D2           (GPIO_PORTB | GPIO_PF | 6)
+#define PB7_PF_SD2_D3           (GPIO_PORTB | GPIO_PF | 7)
+#define PB8_PF_SD2_CMD          (GPIO_PORTB | GPIO_PF | 8)
+#define PB9_PF_SD2_CLK          (GPIO_PORTB | GPIO_PF | 9)
+#define PB10_PF_CSI_D0          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 10)
+#define PB11_PF_CSI_D1          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 11)
+#define PB12_PF_CSI_D2          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 12)
+#define PB13_PF_CSI_D3          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 13)
+#define PB14_PF_CSI_D4          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 14)
+#define PB15_PF_CSI_MCLK        (GPIO_PORTB | GPIO_PF | GPIO_OUT | 15)
+#define PB16_PF_CSI_PIXCLK      (GPIO_PORTB | GPIO_PF | GPIO_OUT | 16)
+#define PB17_PF_CSI_D5          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 17)
+#define PB18_PF_CSI_D6          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 18)
+#define PB19_PF_CSI_D7          (GPIO_PORTB | GPIO_PF | GPIO_OUT | 19)
+#define PB20_PF_CSI_VSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 20)
+#define PB21_PF_CSI_HSYNC       (GPIO_PORTB | GPIO_PF | GPIO_OUT | 21)
+#define PB23_PF_USB_PWR         (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USB_OC          (GPIO_PORTB | GPIO_PF | 24)
+#define PB26_PF_USBH1_FS        (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBH1_OE        (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_USBH1_TXDM      (GPIO_PORTB | GPIO_PF | 28)
+#define PB29_PF_USBH1_TXDP      (GPIO_PORTB | GPIO_PF | 29)
+#define PB30_PF_USBH1_RXDM      (GPIO_PORTB | GPIO_PF | 30)
+#define PB31_PF_USBH1_RXDP      (GPIO_PORTB | GPIO_PF | 31)
+#define PC14_PF_TOUT            (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_TIN             (GPIO_PORTC | GPIO_PF | 15)
+#define PC20_PF_SSI1_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 20)
+#define PC21_PF_SSI1_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 21)
+#define PC22_PF_SSI1_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 22)
+#define PC23_PF_SSI1_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 23)
+#define PC24_PF_SSI2_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 24)
+#define PC25_PF_SSI2_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 25)
+#define PC26_PF_SSI2_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 26)
+#define PC27_PF_SSI2_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 27)
+#define PC28_PF_SSI3_FS         (GPIO_PORTC | GPIO_PF | GPIO_IN | 28)
+#define PC29_PF_SSI3_RXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 29)
+#define PC30_PF_SSI3_TXD        (GPIO_PORTC | GPIO_PF | GPIO_IN | 30)
+#define PC31_PF_SSI3_CLK        (GPIO_PORTC | GPIO_PF | GPIO_IN | 31)
+#define PD17_PF_I2C_DATA        (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17)
+#define PD18_PF_I2C_CLK         (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18)
+#define PD19_PF_CSPI2_SS2       (GPIO_PORTD | GPIO_PF | 19)
+#define PD20_PF_CSPI2_SS1       (GPIO_PORTD | GPIO_PF | 20)
+#define PD21_PF_CSPI2_SS0       (GPIO_PORTD | GPIO_PF | 21)
+#define PD22_PF_CSPI2_SCLK      (GPIO_PORTD | GPIO_PF | 22)
+#define PD23_PF_CSPI2_MISO      (GPIO_PORTD | GPIO_PF | 23)
+#define PD24_PF_CSPI2_MOSI      (GPIO_PORTD | GPIO_PF | 24)
+#define PD25_PF_CSPI1_RDY       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25)
+#define PD26_PF_CSPI1_SS2       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26)
+#define PD27_PF_CSPI1_SS1       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27)
+#define PD28_PF_CSPI1_SS0       (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28)
+#define PD29_PF_CSPI1_SCLK      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29)
+#define PD30_PF_CSPI1_MISO      (GPIO_PORTD | GPIO_PF | GPIO_IN | 30)
+#define PD31_PF_CSPI1_MOSI      (GPIO_PORTD | GPIO_PF | GPIO_OUT | 31)
+#define PE3_PF_UART2_CTS        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 3)
+#define PE4_PF_UART2_RTS        (GPIO_PORTE | GPIO_PF | GPIO_IN | 4)
+#define PE5_PF_PWMO             (GPIO_PORTE | GPIO_PF | 5)
+#define PE6_PF_UART2_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 6)
+#define PE7_PF_UART2_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 7)
+#define PE8_PF_UART3_TXD        (GPIO_PORTE | GPIO_PF | GPIO_OUT | 8)
+#define PE9_PF_UART3_RXD        (GPIO_PORTE | GPIO_PF | GPIO_IN | 9)
+#define PE10_PF_UART3_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 10)
+#define PE11_PF_UART3_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 11)
+#define PE12_PF_UART1_TXD       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 12)
+#define PE13_PF_UART1_RXD       (GPIO_PORTE | GPIO_PF | GPIO_IN | 13)
+#define PE14_PF_UART1_CTS       (GPIO_PORTE | GPIO_PF | GPIO_OUT | 14)
+#define PE15_PF_UART1_RTS       (GPIO_PORTE | GPIO_PF | GPIO_IN | 15)
+#define PE16_PF_RTCK            (GPIO_PORTE | GPIO_PF | GPIO_OUT | 16)
+#define PE17_PF_RESET_OUT       (GPIO_PORTE | GPIO_PF | 17)
+#define PE18_PF_SD1_D0          (GPIO_PORTE | GPIO_PF | 18)
+#define PE19_PF_SD1_D1          (GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SD1_D2          (GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SD1_D3          (GPIO_PORTE | GPIO_PF | 21)
+#define PE22_PF_SD1_CMD         (GPIO_PORTE | GPIO_PF | 22)
+#define PE23_PF_SD1_CLK         (GPIO_PORTE | GPIO_PF | 23)
+#define PF0_PF_NRFB             (GPIO_PORTF | GPIO_PF | 0)
+#define PF2_PF_NFWP             (GPIO_PORTF | GPIO_PF | 2)
+#define PF4_PF_NFALE            (GPIO_PORTF | GPIO_PF | 4)
+#define PF5_PF_NFRE             (GPIO_PORTF | GPIO_PF | 5)
+#define PF6_PF_NFWE             (GPIO_PORTF | GPIO_PF | 6)
+#define PF15_PF_CLKO            (GPIO_PORTF | GPIO_PF | 15)
+#define PF21_PF_CS4             (GPIO_PORTF | GPIO_PF | 21)
+#define PF22_PF_CS5             (GPIO_PORTF | GPIO_PF | 22)
 
 /* Alternate GPIO pin functions */
 
-#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
-#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
-#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
-#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
-#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
-#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
-#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
-#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
-#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
-#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
-#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
-#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
-#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
-#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
-#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
-#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
-#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
-#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
-#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
-#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
-#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
-#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
-#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
-#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
-#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
-#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
-#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
+#define PB26_AF_UART4_RTS       (GPIO_PORTB | GPIO_AF | GPIO_IN | 26)
+#define PB28_AF_UART4_TXD       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 28)
+#define PB29_AF_UART4_CTS       (GPIO_PORTB | GPIO_AF | GPIO_OUT | 29)
+#define PB31_AF_UART4_RXD       (GPIO_PORTB | GPIO_AF | GPIO_IN | 31)
+#define PC28_AF_SLCDC2_D0       (GPIO_PORTC | GPIO_AF | 28)
+#define PC29_AF_SLCDC2_RS       (GPIO_PORTC | GPIO_AF | 29)
+#define PC30_AF_SLCDC2_CS       (GPIO_PORTC | GPIO_AF | 30)
+#define PC31_AF_SLCDC2_CLK      (GPIO_PORTC | GPIO_AF | 31)
+#define PD19_AF_USBH2_DATA4     (GPIO_PORTD | GPIO_AF | 19)
+#define PD20_AF_USBH2_DATA3     (GPIO_PORTD | GPIO_AF | 20)
+#define PD21_AF_USBH2_DATA6     (GPIO_PORTD | GPIO_AF | 21)
+#define PD22_AF_USBH2_DATA0     (GPIO_PORTD | GPIO_AF | 22)
+#define PD23_AF_USBH2_DATA2     (GPIO_PORTD | GPIO_AF | 23)
+#define PD24_AF_USBH2_DATA1     (GPIO_PORTD | GPIO_AF | 24)
+#define PD26_AF_USBH2_DATA5     (GPIO_PORTD | GPIO_AF | 26)
+#define PE0_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 0)
+#define PE1_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 1)
+#define PE2_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 2)
+#define PE3_AF_KP_COL7          (GPIO_PORTE | GPIO_AF | 3)
+#define PE4_AF_KP_ROW7          (GPIO_PORTE | GPIO_AF | 4)
+#define PE6_AF_KP_COL6          (GPIO_PORTE | GPIO_AF | 6)
+#define PE7_AF_KP_ROW6          (GPIO_PORTE | GPIO_AF | 7)
+#define PE16_AF_OWIRE           (GPIO_PORTE | GPIO_AF | 16)
+#define PE18_AF_CSPI3_MISO      (GPIO_PORTE | GPIO_AF | GPIO_IN | 18)
+#define PE21_AF_CSPI3_SS        (GPIO_PORTE | GPIO_AF | GPIO_OUT | 21)
+#define PE22_AF_CSPI3_MOSI      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 22)
+#define PE23_AF_CSPI3_SCLK      (GPIO_PORTE | GPIO_AF | GPIO_OUT | 23)
 
 /* AIN GPIO pin functions */
 
-#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
-#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
-#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
-#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
-#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
-#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
-#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
-#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
-#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
-#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
-#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
-#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
-#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
-#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
-#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
-#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
-#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
-#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
-#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
-#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
-#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
-#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
-#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
-#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
-#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
-#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
-#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
-#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
-#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
-#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
-#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
-#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
-#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
-#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
-#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
-#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
+#define PA6_AIN_SLCDC1_DAT0     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 6)
+#define PA7_AIN_SLCDC1_DAT1     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 7)
+#define PA8_AIN_SLCDC1_DAT2     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 8)
+#define PA0_AIN_SLCDC1_DAT3     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0)
+#define PA11_AIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 11)
+#define PA13_AIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 13)
+#define PA15_AIN_SLCDC1_DAT9    (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 15)
+#define PA17_AIN_SLCDC1_DAT11   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17)
+#define PA19_AIN_SLCDC1_DAT13   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 19)
+#define PA21_AIN_SLCDC1_DAT15   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 21)
+#define PA22_AIN_EXT_DMAGRANT   (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 22)
+#define PA24_AIN_SLCDC1_D0      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 24)
+#define PA25_AIN_SLCDC1_RS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 25)
+#define PA26_AIN_SLCDC1_CS      (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 26)
+#define PA27_AIN_SLCDC1_CLK     (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 27)
+#define PB6_AIN_SLCDC1_D0       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 6)
+#define PB7_AIN_SLCDC1_RS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 7)
+#define PB8_AIN_SLCDC1_CS       (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 8)
+#define PB9_AIN_SLCDC1_CLK      (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 9)
+#define PB25_AIN_SLCDC1_DAT0    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 25)
+#define PB26_AIN_SLCDC1_DAT1    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 26)
+#define PB27_AIN_SLCDC1_DAT2    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 27)
+#define PB28_AIN_SLCDC1_DAT3    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 28)
+#define PB29_AIN_SLCDC1_DAT4    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 29)
+#define PB30_AIN_SLCDC1_DAT5    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 30)
+#define PB31_AIN_SLCDC1_DAT6    (GPIO_PORTB | GPIO_AIN | GPIO_OUT | 31)
+#define PC5_AIN_SLCDC1_DAT7     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 5)
+#define PC6_AIN_SLCDC1_DAT8     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 6)
+#define PC7_AIN_SLCDC1_DAT9     (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 7)
+#define PC8_AIN_SLCDC1_DAT10    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 8)
+#define PC9_AIN_SLCDC1_DAT11    (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 9)
+#define PC10_AIN_SLCDC1_DAT12   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 10)
+#define PC11_AIN_SLCDC1_DAT13   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 11)
+#define PC12_AIN_SLCDC1_DAT14   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 12)
+#define PC13_AIN_SLCDC1_DAT15   (GPIO_PORTC | GPIO_AIN | GPIO_OUT | 13)
+#define PE5_AIN_PC_SPKOUT       (GPIO_PORTE | GPIO_AIN | GPIO_OUT | 5)
 
 /* BIN GPIO pin functions */
 
-#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
+#define PE5_BIN_TOUT2           (GPIO_PORTE | GPIO_BIN | GPIO_OUT | 5)
 
 /* CIN GPIO pin functions */
 
-#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
-#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
-#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
-#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
-#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
-#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
-#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
-#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
-#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
-#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
+#define PA14_CIN_SLCDC1_DAT0    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 14)
+#define PA15_CIN_SLCDC1_DAT1    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 15)
+#define PA16_CIN_SLCDC1_DAT2    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 16)
+#define PA17_CIN_SLCDC1_DAT3    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 17)
+#define PA18_CIN_SLCDC1_DAT4    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 18)
+#define PA19_CIN_SLCDC1_DAT5    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 19)
+#define PA20_CIN_SLCDC1_DAT6    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 20)
+#define PA21_CIN_SLCDC1_DAT7    (GPIO_PORTA | GPIO_CIN | GPIO_OUT | 21)
+#define PB30_CIN_UART4_CTS      (GPIO_PORTB | GPIO_CIN | GPIO_OUT | 30)
+#define PE5_CIN_TOUT3           (GPIO_PORTE | GPIO_CIN | GPIO_OUT | 5)
 
 /* AOUT GPIO pin functions */
 
-#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
-#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
+#define PB29_AOUT_UART4_RXD     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 29)
+#define PB31_AOUT_UART4_RTS     (GPIO_PORTB | GPIO_AOUT | GPIO_IN | 31)
 #define PC8_AOUT_USBOTG_TXR_INT (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 8)
-#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
-#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
-
+#define PC15_AOUT_WKGD          (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 15)
+#define PF21_AOUT_DTACK         (GPIO_PORTF | GPIO_AOUT | GPIO_IN | 21)
 
-#endif
+#endif /* ifndef __MACH_IOMUX_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index e1fc6da1cd1..e51465d7b22 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -16,12 +16,10 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */
-
-#ifndef __MACH_MX31_IOMUX_H__
-#define __MACH_MX31_IOMUX_H__
+#ifndef __MACH_IOMUX_MX3_H__
+#define __MACH_IOMUX_MX3_H__
 
 #include <linux/types.h>
-
 /*
  * various IOMUX output functions
  */
@@ -34,7 +32,7 @@
 #define IOMUX_OCONFIG_ALT4 (5 << 4)     /* used as alternate function 4 */
 #define IOMUX_OCONFIG_ALT5 (6 << 4)     /* used as alternate function 5 */
 #define IOMUX_OCONFIG_ALT6 (7 << 4)     /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE  0           /* not configured for input */
+#define IOMUX_ICONFIG_NONE  0           /* not configured for input */
 #define IOMUX_ICONFIG_GPIO  1           /* used as GPIO */
 #define IOMUX_ICONFIG_FUNC  2           /* used as function */
 #define IOMUX_ICONFIG_ALT1  4           /* used as alternate function 1 */
@@ -167,11 +165,6 @@ int mxc_iomux_mode(unsigned int pin_mode);
         MXC_GPIO_IRQ_START)
 
 /*
- * The number of gpio devices among the pads
- */
-#define GPIO_PORT_MAX 3
-
-/*
  * This enumeration is constructed based on the Section
  * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
  * value is constructed based on the rules described above.
@@ -633,40 +626,40 @@ enum iomux_pins {
 #define MX31_PIN_TXD2__GPIO1_28         IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D4__GPIO3_4        IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSI_D5__GPIO3_5        IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3    IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4    IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5    IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6    IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7    IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_CLK__USBOTG_CLK        IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
-#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0     IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1     IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2     IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3     IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4     IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5     IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6     IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7     IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK         IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR         IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT         IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP         IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM         IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP         IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM          IOMUX_MODE(MX31_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP          IOMUX_MODE(MX31_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV           IOMUX_MODE(MX31_PIN_CSPI1_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB          IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS        IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_SFS6__USBH1_SUSPEND    IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_NFRE_B__GPIO1_11       IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_NFALE__GPIO1_12        IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0       IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1       IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD3__USBH2_DATA2     IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD3__USBH2_DATA3     IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK3__USBH2_DATA4      IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS3__USBH2_DATA5      IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_STXD6__USBH2_DATA6     IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SRXD6__USBH2_DATA7     IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
-#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK           IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR           IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT           IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP           IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SCK6__GPIO1_25         IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30       IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA      IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
@@ -711,8 +704,8 @@ enum iomux_pins {
 #define MX31_PIN_DSR_DCE1__GPIO2_9      IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_RI_DCE1__GPIO2_10      IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_DCD_DCE1__GPIO2_11     IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
-#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21        IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22        IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_3__GPIO1_3       IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_CSPI2_SS1__CSPI3_SS1   IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_RTS1__GPIO2_6          IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
@@ -727,13 +720,14 @@ enum iomux_pins {
 #define MX31_PIN_SCK5__SCK5             IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_SFS5__SFS5             IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
-/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
- * cspi1_ss1*/
+/*
+ * XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed with cspi2_ss0,
+ * cspi2_ss1, cspi1_ss0 cspi1_ss1
+ */
 
 /*
  * This function configures the pad value for a IOMUX pin.
  */
 void mxc_iomux_set_pad(enum iomux_pins, u32);
 
-#endif
-
+#endif /* ifndef __MACH_IOMUX_MX3_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1db22..2a24bae1b87 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8                      IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9                           IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9                                   IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9                                   IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9                      IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10                         IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
new file mode 100644
index 00000000000..b4f975e6a66
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -0,0 +1,326 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX51_H__
+#define __MACH_IOMUX_MX51_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+        IOMUX_CONFIG_ALT0,
+        IOMUX_CONFIG_ALT1,
+        IOMUX_CONFIG_ALT2,
+        IOMUX_CONFIG_ALT3,
+        IOMUX_CONFIG_ALT4,
+        IOMUX_CONFIG_ALT5,
+        IOMUX_CONFIG_ALT6,
+        IOMUX_CONFIG_ALT7,
+        IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
+        IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* Pad control groupings */
+#define MX51_UART1_PAD_CTRL     (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+                                PAD_CTL_DSE_HIGH)
+#define MX51_UART2_PAD_CTRL     (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+                                PAD_CTL_SRE_FAST)
+#define MX51_UART3_PAD_CTRL     (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+                                PAD_CTL_SRE_FAST)
+
+/*
+ * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/*
+ * FIXME: This was converted using scripts from existing Freescale code to
+ * this form used upstream. Need to verify the name format.
+ */
+
+/*                                              PAD      MUX   ALT INPSE PATH PADCTRL */
+
+#define MX51_PAD_GPIO_2_0__EIM_D16      IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_1__EIM_D17      IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_2__EIM_D18      IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_3__EIM_D19      IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_4__EIM_D20      IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_5__EIM_D21      IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_6__EIM_D22      IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_7__EIM_D23      IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
+
+/* Babbage UART3 */
+#define MX51_PAD_EIM_D24__UART3_CTS     IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D25__UART3_RXD     IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D26__UART3_TXD     IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
+#define MX51_PAD_EIM_D27__UART3_RTS     IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
+
+#define MX51_PAD_EIM_D28__EIM_D28       IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D29__EIM_D29       IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D30__EIM_D30       IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_D31__EIM_D31       IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_10__EIM_A16     IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_11__EIM_A17     IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_12__EIM_A18     IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_13__EIM_A19     IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_14__EIM_A20     IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_15__EIM_A21     IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_16__EIM_A22     IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_17__EIM_A23     IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_18__EIM_A24     IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_19__EIM_A25     IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_20__EIM_A26     IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_21__EIM_A27     IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB0__EIM_EB0       IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_EB1__EIM_EB1       IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_22__EIM_EB2     IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_23__EIM_EB3     IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_2_24__EIM_OE      IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_25__EIM_CS0     IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_26__EIM_CS1     IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_27__EIM_CS2     IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_28__EIM_CS3     IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_29__EIM_CS4     IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_30__EIM_CS5     IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_2_31__EIM_DTACK   IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_GPIO_3_1__EIM_LBA      IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__EIM_CRE      IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DRAM_CS1__DRAM_CS1     IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__NANDF_WE_B   IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__NANDF_RE_B   IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__NANDF_ALE    IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__NANDF_CLE    IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__NANDF_WP_B   IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__NANDF_RB0    IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_9__NANDF_RB1    IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_10__NANDF_RB2   IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_11__NANDF_RB3   IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__GPIO_NAND   IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
+/* REVISIT: Not sure of these values
+
+  #define MX51_PAD_GPIO_1___NANDF_RB4   IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+  #define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+*/
+#define MX51_PAD_GPIO_3_14__NANDF_RB6   IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_16__NANDF_CS0   IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_17__NANDF_CS1   IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_18__NANDF_CS2   IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_19__NANDF_CS3   IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_20__NANDF_CS4   IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_21__NANDF_CS5   IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_22__NANDF_CS6   IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_23__NANDF_CS7   IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT       IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_25__NANDF_D15   IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_26__NANDF_D14   IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_27__NANDF_D13   IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_28__NANDF_D12   IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_29__NANDF_D11   IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_30__NANDF_D10   IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_31__NANDF_D9    IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_0__NANDF_D8     IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_1__NANDF_D7     IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_2__NANDF_D6     IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_3__NANDF_D5     IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_4__NANDF_D4     IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_5__NANDF_D3     IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_6__NANDF_D2     IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_7__NANDF_D1     IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_8__NANDF_D0     IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_12__CSI1_D8     IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_13__CSI1_D9     IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D10__CSI1_D10     IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D11__CSI1_D11     IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D12__CSI1_D12     IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D13__CSI1_D13     IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D14__CSI1_D14     IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D15__CSI1_D15     IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D16__CSI1_D16     IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D17__CSI1_D17     IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D18__CSI1_D18     IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_D19__CSI1_D19     IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK       IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK   IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI1_PKE0__CSI1_PKE0   IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_9__CSI2_D12     IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_10__CSI2_D13    IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D14    IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D15    IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D16    IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D17    IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_11__CSI2_D18    IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_12__CSI2_D19    IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_13__CSI2_VSYNC  IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_14__CSI2_HSYNC  IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_CSI2_PKE0__CSI2_PKE0   IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_16__I2C1_CLK    IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_17__I2C1_DAT    IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_20__AUD3_BB_CK  IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_21__AUD3_BB_FS  IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_22__CSPI1_MOSI  IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_23__CSPI1_MISO  IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_24__CSPI1_SS0   IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_25__CSPI1_SS1   IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_26__CSPI1_RDY   IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_4_27__CSPI1_SCLK  IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
+
+/* Babbage UART1 */
+#define MX51_PAD_UART1_RXD__UART1_RXD   IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_TXD__UART1_TXD   IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
+#define MX51_PAD_UART1_RTS__UART1_RTS   IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
+#define MX51_PAD_UART1_CTS__UART1_CTS   IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
+
+/* Babbage UART2 */
+#define MX51_PAD_UART2_RXD__UART2_RXD   IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
+#define MX51_PAD_UART2_TXD__UART2_TXD   IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
+
+#define MX51_PAD_GPIO_1_22__UART3_RXD   IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_23__UART3_TXD   IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_24__OWIRE_LINE  IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW0__KEY_ROW0     IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW1__KEY_ROW1     IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW2__KEY_ROW2     IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_ROW3__KEY_ROW3     IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL0__KEY_COL0     IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL1__KEY_COL1     IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL2__KEY_COL2     IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL3__KEY_COL3     IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL4__KEY_COL4     IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_KEY_COL5__KEY_COL5     IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_25__USBH1_CLK   IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_26__USBH1_DIR   IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_27__USBH1_STP   IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_28__USBH1_NXT   IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_0__DI1_PIN11    IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_1__DI1_PIN12    IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_2__DI1_PIN13    IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_3__DI1_D0_CS    IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_4__DI1_D1_CS    IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10       IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11       IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12       IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13       IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14       IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15       IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16       IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17       IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18       IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19       IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20       IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21       IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22       IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23       IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN3__DI1_PIN3     IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI1_PIN2__DI1_PIN2     IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN4__DI2_PIN4     IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN2__DI2_PIN2     IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_PIN3__DI2_PIN3     IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_19__DISP2_DAT6  IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_29__DISP2_DAT7  IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_30__DISP2_DAT8  IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_31__DISP2_DAT9  IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10       IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11       IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12       IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CMD__SD1_CMD       IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_CLK__SD1_CLK       IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA0__SD1_DATA0   IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA1__SD1_DATA1   IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA2__SD1_DATA2   IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD1_DATA3__SD1_DATA3   IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_0__GPIO1_0      IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_1__GPIO1_1      IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__SD2_CMD       IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_CLK__SD2_CLK       IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA0__SD2_DATA0   IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__SD2_DATA1   IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__SD2_DATA2   IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA3__SD2_DATA3   IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__GPIO1_2      IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_3__GPIO1_3      IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ     IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_4__GPIO1_4      IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_5__GPIO1_5      IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_6__GPIO1_6      IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_7__GPIO1_7      IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO_1_8__GPIO1_8      IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
+                                                (PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP |  PAD_CTL_HYS))
+#define MX51_PAD_GPIO_1_9__GPIO1_9      IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
+
+/* EIM */
+#define MX51_PAD_EIM_DA0__EIM_DA0       IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA1__EIM_DA1       IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA2__EIM_DA2       IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA3__EIM_DA3       IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA4__EIM_DA4       IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA5__EIM_DA5       IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA6__EIM_DA6       IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA7__EIM_DA7       IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
+
+#define MX51_PAD_EIM_DA8__EIM_DA8       IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA9__EIM_DA9       IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA10__EIM_DA10     IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA11__EIM_DA11     IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA12__EIM_DA12     IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA13__EIM_DA13     IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA14__EIM_DA14     IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
+#define MX51_PAD_EIM_DA15__EIM_DA15     IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
new file mode 100644
index 00000000000..884f5753f27
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#ifndef __MACH_IOMUX_V1_H__
+#define __MACH_IOMUX_V1_H__
+
+/*
+*  GPIO Module and I/O Multiplexer
+*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+*/
+#define MXC_DDIR(x)     (0x00 + ((x) << 8))
+#define MXC_OCR1(x)     (0x04 + ((x) << 8))
+#define MXC_OCR2(x)     (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x)  (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x)  (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x)  (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x)  (0x18 + ((x) << 8))
+#define MXC_DR(x)       (0x1c + ((x) << 8))
+#define MXC_GIUS(x)     (0x20 + ((x) << 8))
+#define MXC_SSR(x)      (0x24 + ((x) << 8))
+#define MXC_ICR1(x)     (0x28 + ((x) << 8))
+#define MXC_ICR2(x)     (0x2c + ((x) << 8))
+#define MXC_IMR(x)      (0x30 + ((x) << 8))
+#define MXC_ISR(x)      (0x34 + ((x) << 8))
+#define MXC_GPR(x)      (0x38 + ((x) << 8))
+#define MXC_SWR(x)      (0x3c + ((x) << 8))
+#define MXC_PUEN(x)     (0x40 + ((x) << 8))
+
+#define MX1_NUM_GPIO_PORT       4
+#define MX21_NUM_GPIO_PORT      6
+#define MX27_NUM_GPIO_PORT      6
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA      (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB      (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC      (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD      (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE      (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF      (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT        (1 << 8)
+#define GPIO_IN         (0 << 8)
+#define GPIO_PUEN       (1 << 9)
+
+#define GPIO_PF         (1 << 10)
+#define GPIO_AF         (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK   (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN        (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN        (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN        (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO       (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK  (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT       (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR   (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0     (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1     (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK  (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT       (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR   (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0     (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1     (3 << GPIO_BOUT_SHIFT)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
+
+extern int mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+                const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
+
+#endif /* __MACH_IOMUX_V1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 1deda018489..f2f73d31d5b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -81,11 +81,13 @@ struct pad_desc {
 
 #define PAD_CTL_ODE                     (1 << 3)
 
-#define PAD_CTL_DSE_STANDARD            (0 << 1)
-#define PAD_CTL_DSE_HIGH                (1 << 1)
-#define PAD_CTL_DSE_MAX                 (2 << 1)
+#define PAD_CTL_DSE_LOW                 (0 << 1)
+#define PAD_CTL_DSE_MED                 (1 << 1)
+#define PAD_CTL_DSE_HIGH                (2 << 1)
+#define PAD_CTL_DSE_MAX                 (3 << 1)
 
 #define PAD_CTL_SRE_FAST                (1 << 0)
+#define PAD_CTL_SRE_SLOW                (0 << 0)
 
 /*
  * setups a single pad in the iomuxer
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 011cfcd8b82..3d226d7e7be 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -1,102 +1,14 @@
 /*
-* Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
-* Copyright (C) 2009 by Holger Schurig <hs4233@mail.mn-solutions.de>
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License
-* as published by the Free Software Foundation; either version 2
-* of the License, or (at your option) any later version.
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-* MA 02110-1301, USA.
-*/
-
-#ifndef _MXC_IOMUX_H
-#define _MXC_IOMUX_H
-
-/*
-*  GPIO Module and I/O Multiplexer
-*  x = 0..3 for reg_A, reg_B, reg_C, reg_D
-*/
-#define VA_GPIO_BASE    IO_ADDRESS(GPIO_BASE_ADDR)
-#define MXC_DDIR(x)    (0x00 + ((x) << 8))
-#define MXC_OCR1(x)    (0x04 + ((x) << 8))
-#define MXC_OCR2(x)    (0x08 + ((x) << 8))
-#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
-#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
-#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
-#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
-#define MXC_DR(x)      (0x1c + ((x) << 8))
-#define MXC_GIUS(x)    (0x20 + ((x) << 8))
-#define MXC_SSR(x)     (0x24 + ((x) << 8))
-#define MXC_ICR1(x)    (0x28 + ((x) << 8))
-#define MXC_ICR2(x)    (0x2c + ((x) << 8))
-#define MXC_IMR(x)     (0x30 + ((x) << 8))
-#define MXC_ISR(x)     (0x34 + ((x) << 8))
-#define MXC_GPR(x)     (0x38 + ((x) << 8))
-#define MXC_SWR(x)     (0x3c + ((x) << 8))
-#define MXC_PUEN(x)    (0x40 + ((x) << 8))
-
-#ifdef CONFIG_ARCH_MX1
-# define GPIO_PORT_MAX  3
-#endif
-#ifdef CONFIG_ARCH_MX2
-# define GPIO_PORT_MAX  5
-#endif
-#ifdef CONFIG_ARCH_MX25
-# define GPIO_PORT_MAX  3
-#endif
-
-#ifndef GPIO_PORT_MAX
-# error "GPIO config port count unknown!"
-#endif
-
-#define GPIO_PIN_MASK 0x1f
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
-
-#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
-
-#define GPIO_OUT   (1 << 8)
-#define GPIO_IN    (0 << 8)
-#define GPIO_PUEN  (1 << 9)
-
-#define GPIO_PF    (1 << 10)
-#define GPIO_AF    (1 << 11)
-
-#define GPIO_OCR_SHIFT 12
-#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
-#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
-#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
-#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
-#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
-
-#define GPIO_AOUT_SHIFT 14
-#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
-#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
-
-#define GPIO_BOUT_SHIFT 16
-#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
-#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+ * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __MACH_IOMUX_H__
+#define __MACH_IOMUX_H__
 
+/* This file will go away, please include mach/iomux-mx... directly */
 
 #ifdef CONFIG_ARCH_MX1
 #include <mach/iomux-mx1.h>
@@ -110,25 +22,5 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
-#ifdef CONFIG_ARCH_MX25
-#include <mach/iomux-mx25.h>
-#endif
 
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
-#define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
-#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
-#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
-#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
-
-
-extern void mxc_gpio_mode(int gpio_mode);
-extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-        const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
-
-#endif
+#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d592168..86781f7b0c0 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -12,22 +12,29 @@
 #define __ASM_ARCH_MXC_IRQS_H__
 
 /*
- * So far all i.MX SoCs have 64 internal interrupts
+ * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
  */
+#ifdef CONFIG_MXC_TZIC
+#define MXC_INTERNAL_IRQS       128
+#else
 #define MXC_INTERNAL_IRQS       64
+#endif
 
 #define MXC_GPIO_IRQ_START      MXC_INTERNAL_IRQS
 
-#if defined CONFIG_ARCH_MX1
-#define MXC_GPIO_IRQS           (32 * 4)
-#elif defined CONFIG_ARCH_MX2
+/* these are ordered by size to support multi-SoC kernels */
+#if defined CONFIG_ARCH_MX2
 #define MXC_GPIO_IRQS           (32 * 6)
-#elif defined CONFIG_ARCH_MX3
-#define MXC_GPIO_IRQS           (32 * 3)
+#elif defined CONFIG_ARCH_MX1
+#define MXC_GPIO_IRQS           (32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS           (32 * 4)
+#elif defined CONFIG_ARCH_MX5
+#define MXC_GPIO_IRQS           (32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS           (32 * 4)
+#elif defined CONFIG_ARCH_MX3
+#define MXC_GPIO_IRQS           (32 * 3)
 #endif
 
 /*
@@ -37,7 +44,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START     (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS  16
+#endif
 
 #define MXC_IPU_IRQ_START       (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
@@ -46,6 +58,7 @@
 #else
 #define MX3_IPU_IRQS 0
 #endif
+/* REVISIT: Add IPU irqs on IMX51 */
 
 #define NR_IRQS                 (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index d3afafdcc0e..c4b40c35a6a 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -11,37 +11,45 @@
 #ifndef __ASM_ARCH_MXC_MEMORY_H__
 #define __ASM_ARCH_MXC_MEMORY_H__
 
-#if defined CONFIG_ARCH_MX1
-#define PHYS_OFFSET             UL(0x08000000)
-#elif defined CONFIG_ARCH_MX2
-#ifdef CONFIG_MACH_MX21
-#define PHYS_OFFSET             UL(0xC0000000)
-#endif
-#ifdef CONFIG_MACH_MX27
-#define PHYS_OFFSET             UL(0xA0000000)
-#endif
-#elif defined CONFIG_ARCH_MX3
-#define PHYS_OFFSET             UL(0x80000000)
-#elif defined CONFIG_ARCH_MX25
-#define PHYS_OFFSET             UL(0x80000000)
-#elif defined CONFIG_ARCH_MXC91231
-#define PHYS_OFFSET             UL(0x90000000)
+#define MX1_PHYS_OFFSET         UL(0x08000000)
+#define MX21_PHYS_OFFSET        UL(0xc0000000)
+#define MX25_PHYS_OFFSET        UL(0x80000000)
+#define MX27_PHYS_OFFSET        UL(0xa0000000)
+#define MX3x_PHYS_OFFSET        UL(0x80000000)
+#define MX51_PHYS_OFFSET        UL(0x90000000)
+#define MXC91231_PHYS_OFFSET    UL(0x90000000)
+
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
+# if defined CONFIG_ARCH_MX1
+#  define PHYS_OFFSET           MX1_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX21
+#  define PHYS_OFFSET           MX21_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX25
+#  define PHYS_OFFSET           MX25_PHYS_OFFSET
+# elif defined CONFIG_MACH_MX27
+#  define PHYS_OFFSET           MX27_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX3
+#  define PHYS_OFFSET           MX3x_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MXC91231
+#  define PHYS_OFFSET           MXC91231_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX5
+#  define PHYS_OFFSET           MX51_PHYS_OFFSET
+# endif
 #endif
 
-#if defined(CONFIG_MX1_VIDEO)
+#if defined(CONFIG_MX3_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_8M
 
-#if defined(CONFIG_MX3_VIDEO)
+#elif defined(CONFIG_MX1_VIDEO)
 /*
  * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
+ * This is required for i.MX camera driver to capture at least four VGA frames.
  */
-#define CONSISTENT_DMA_SIZE SZ_8M
-#endif /* CONFIG_MX3_VIDEO */
+#define CONSISTENT_DMA_SIZE SZ_4M
+#endif /* CONFIG_MX1_VIDEO */
 
 #endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mtd-xip.h b/arch/arm/plat-mxc/include/mach/mtd-xip.h
deleted file mode 100644
index 1ab1bba5688..00000000000
--- a/arch/arm/plat-mxc/include/mach/mtd-xip.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * MTD primitives for XIP support. Architecture specific functions
- *
- * Do not include this file directly. It's included from linux/mtd/xip.h
- *
- * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <mach/mxc_timer.h>
-
-#ifndef __ARCH_IMX_MTD_XIP_H__
-#define __ARCH_IMX_MTD_XIP_H__
-
-#ifdef CONFIG_ARCH_MX1
-/* AITC registers */
-#define AITC_BASE       IO_ADDRESS(AVIC_BASE_ADDR)
-#define NIPNDH          (AITC_BASE + 0x58)
-#define NIPNDL          (AITC_BASE + 0x5C)
-#define INTENABLEH      (AITC_BASE + 0x10)
-#define INTENABLEL      (AITC_BASE + 0x14)
-/* MTD macros */
-#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
-                        || (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
-#define xip_currtime()          (__raw_readl(TIMER_BASE + MXC_TCN))
-#define xip_elapsed_since(x)    (signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
-#define xip_cpu_idle()          asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
-#endif /* CONFIG_ARCH_MX1 */
-
-#endif /* __ARCH_IMX_MTD_XIP_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1b2890a5c45..5eba7e6785d 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -9,156 +9,289 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
 
 #include <mach/vmalloc.h>
 
 /*
  * Memory map
  */
-#define IMX_IO_PHYS     0x00200000
-#define IMX_IO_SIZE     0x00100000
-#define IMX_IO_BASE     VMALLOC_END
+#define MX1_IO_BASE_ADDR        0x00200000
+#define MX1_IO_SIZE             SZ_1M
+#define MX1_IO_BASE_ADDR_VIRT   VMALLOC_END
 
-#define IMX_CS0_PHYS    0x10000000
-#define IMX_CS0_SIZE    0x02000000
+#define MX1_CS0_PHYS            0x10000000
+#define MX1_CS0_SIZE            0x02000000
 
-#define IMX_CS1_PHYS    0x12000000
-#define IMX_CS1_SIZE    0x01000000
+#define MX1_CS1_PHYS            0x12000000
+#define MX1_CS1_SIZE            0x01000000
 
-#define IMX_CS2_PHYS    0x13000000
-#define IMX_CS2_SIZE    0x01000000
+#define MX1_CS2_PHYS            0x13000000
+#define MX1_CS2_SIZE            0x01000000
 
-#define IMX_CS3_PHYS    0x14000000
-#define IMX_CS3_SIZE    0x01000000
+#define MX1_CS3_PHYS            0x14000000
+#define MX1_CS3_SIZE            0x01000000
 
-#define IMX_CS4_PHYS    0x15000000
-#define IMX_CS4_SIZE    0x01000000
+#define MX1_CS4_PHYS            0x15000000
+#define MX1_CS4_SIZE            0x01000000
 
-#define IMX_CS5_PHYS    0x16000000
-#define IMX_CS5_SIZE    0x01000000
+#define MX1_CS5_PHYS            0x16000000
+#define MX1_CS5_SIZE            0x01000000
 
 /*
  *  Register BASEs, based on OFFSETs
  */
-#define AIPI1_BASE_ADDR         (0x00000 + IMX_IO_PHYS)
-#define WDT_BASE_ADDR           (0x01000 + IMX_IO_PHYS)
-#define TIM1_BASE_ADDR          (0x02000 + IMX_IO_PHYS)
-#define TIM2_BASE_ADDR          (0x03000 + IMX_IO_PHYS)
-#define RTC_BASE_ADDR           (0x04000 + IMX_IO_PHYS)
-#define LCDC_BASE_ADDR          (0x05000 + IMX_IO_PHYS)
-#define UART1_BASE_ADDR         (0x06000 + IMX_IO_PHYS)
-#define UART2_BASE_ADDR         (0x07000 + IMX_IO_PHYS)
-#define PWM_BASE_ADDR           (0x08000 + IMX_IO_PHYS)
-#define DMA_BASE_ADDR           (0x09000 + IMX_IO_PHYS)
-#define AIPI2_BASE_ADDR         (0x10000 + IMX_IO_PHYS)
-#define SIM_BASE_ADDR           (0x11000 + IMX_IO_PHYS)
-#define USBD_BASE_ADDR          (0x12000 + IMX_IO_PHYS)
-#define SPI1_BASE_ADDR          (0x13000 + IMX_IO_PHYS)
-#define MMC_BASE_ADDR           (0x14000 + IMX_IO_PHYS)
-#define ASP_BASE_ADDR           (0x15000 + IMX_IO_PHYS)
-#define BTA_BASE_ADDR           (0x16000 + IMX_IO_PHYS)
-#define I2C_BASE_ADDR           (0x17000 + IMX_IO_PHYS)
-#define SSI_BASE_ADDR           (0x18000 + IMX_IO_PHYS)
-#define SPI2_BASE_ADDR          (0x19000 + IMX_IO_PHYS)
-#define MSHC_BASE_ADDR          (0x1A000 + IMX_IO_PHYS)
-#define CCM_BASE_ADDR           (0x1B000 + IMX_IO_PHYS)
-#define SCM_BASE_ADDR           (0x1B804 + IMX_IO_PHYS)
-#define GPIO_BASE_ADDR          (0x1C000 + IMX_IO_PHYS)
-#define EIM_BASE_ADDR           (0x20000 + IMX_IO_PHYS)
-#define SDRAMC_BASE_ADDR        (0x21000 + IMX_IO_PHYS)
-#define MMA_BASE_ADDR           (0x22000 + IMX_IO_PHYS)
-#define AVIC_BASE_ADDR          (0x23000 + IMX_IO_PHYS)
-#define CSI_BASE_ADDR           (0x24000 + IMX_IO_PHYS)
+#define MX1_AIPI1_BASE_ADDR             (0x00000 + MX1_IO_BASE_ADDR)
+#define MX1_WDT_BASE_ADDR               (0x01000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM1_BASE_ADDR              (0x02000 + MX1_IO_BASE_ADDR)
+#define MX1_TIM2_BASE_ADDR              (0x03000 + MX1_IO_BASE_ADDR)
+#define MX1_RTC_BASE_ADDR               (0x04000 + MX1_IO_BASE_ADDR)
+#define MX1_LCDC_BASE_ADDR              (0x05000 + MX1_IO_BASE_ADDR)
+#define MX1_UART1_BASE_ADDR             (0x06000 + MX1_IO_BASE_ADDR)
+#define MX1_UART2_BASE_ADDR             (0x07000 + MX1_IO_BASE_ADDR)
+#define MX1_PWM_BASE_ADDR               (0x08000 + MX1_IO_BASE_ADDR)
+#define MX1_DMA_BASE_ADDR               (0x09000 + MX1_IO_BASE_ADDR)
+#define MX1_AIPI2_BASE_ADDR             (0x10000 + MX1_IO_BASE_ADDR)
+#define MX1_SIM_BASE_ADDR               (0x11000 + MX1_IO_BASE_ADDR)
+#define MX1_USBD_BASE_ADDR              (0x12000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI1_BASE_ADDR              (0x13000 + MX1_IO_BASE_ADDR)
+#define MX1_MMC_BASE_ADDR               (0x14000 + MX1_IO_BASE_ADDR)
+#define MX1_ASP_BASE_ADDR               (0x15000 + MX1_IO_BASE_ADDR)
+#define MX1_BTA_BASE_ADDR               (0x16000 + MX1_IO_BASE_ADDR)
+#define MX1_I2C_BASE_ADDR               (0x17000 + MX1_IO_BASE_ADDR)
+#define MX1_SSI_BASE_ADDR               (0x18000 + MX1_IO_BASE_ADDR)
+#define MX1_SPI2_BASE_ADDR              (0x19000 + MX1_IO_BASE_ADDR)
+#define MX1_MSHC_BASE_ADDR              (0x1A000 + MX1_IO_BASE_ADDR)
+#define MX1_CCM_BASE_ADDR               (0x1B000 + MX1_IO_BASE_ADDR)
+#define MX1_SCM_BASE_ADDR               (0x1B804 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO_BASE_ADDR              (0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_EIM_BASE_ADDR               (0x20000 + MX1_IO_BASE_ADDR)
+#define MX1_SDRAMC_BASE_ADDR            (0x21000 + MX1_IO_BASE_ADDR)
+#define MX1_MMA_BASE_ADDR               (0x22000 + MX1_IO_BASE_ADDR)
+#define MX1_AVIC_BASE_ADDR              (0x23000 + MX1_IO_BASE_ADDR)
+#define MX1_CSI_BASE_ADDR               (0x24000 + MX1_IO_BASE_ADDR)
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)   ((x) - IMX_IO_PHYS + IMX_IO_BASE)
-
-/* define macros needed for entry-macro.S */
-#define AVIC_IO_ADDRESS(x)      IO_ADDRESS(x)
+#define MX1_IO_ADDRESS(x) (                                             \
+        IMX_IO_ADDRESS(x, MX1_IO))
 
 /* fixed interrput numbers */
-#define INT_SOFTINT             0
-#define CSI_INT                 6
-#define DSPA_MAC_INT            7
-#define DSPA_INT                8
-#define COMP_INT                9
-#define MSHC_XINT               10
-#define GPIO_INT_PORTA          11
-#define GPIO_INT_PORTB          12
-#define GPIO_INT_PORTC          13
-#define LCDC_INT                14
-#define SIM_INT                 15
-#define SIM_DATA_INT            16
-#define RTC_INT                 17
-#define RTC_SAMINT              18
-#define UART2_MINT_PFERR        19
-#define UART2_MINT_RTS          20
-#define UART2_MINT_DTR          21
-#define UART2_MINT_UARTC        22
-#define UART2_MINT_TX           23
-#define UART2_MINT_RX           24
-#define UART1_MINT_PFERR        25
-#define UART1_MINT_RTS          26
-#define UART1_MINT_DTR          27
-#define UART1_MINT_UARTC        28
-#define UART1_MINT_TX           29
-#define UART1_MINT_RX           30
-#define VOICE_DAC_INT           31
-#define VOICE_ADC_INT           32
-#define PEN_DATA_INT            33
-#define PWM_INT                 34
-#define SDHC_INT                35
-#define I2C_INT                 39
-#define CSPI_INT                41
-#define SSI_TX_INT              42
-#define SSI_TX_ERR_INT          43
-#define SSI_RX_INT              44
-#define SSI_RX_ERR_INT          45
-#define TOUCH_INT               46
-#define USBD_INT0               47
-#define USBD_INT1               48
-#define USBD_INT2               49
-#define USBD_INT3               50
-#define USBD_INT4               51
-#define USBD_INT5               52
-#define USBD_INT6               53
-#define BTSYS_INT               55
-#define BTTIM_INT               56
-#define BTWUI_INT               57
-#define TIM2_INT                58
-#define TIM1_INT                59
-#define DMA_ERR                 60
-#define DMA_INT                 61
-#define GPIO_INT_PORTD          62
-#define WDT_INT                 63
+#define MX1_INT_SOFTINT         0
+#define MX1_CSI_INT             6
+#define MX1_DSPA_MAC_INT        7
+#define MX1_DSPA_INT            8
+#define MX1_COMP_INT            9
+#define MX1_MSHC_XINT           10
+#define MX1_GPIO_INT_PORTA      11
+#define MX1_GPIO_INT_PORTB      12
+#define MX1_GPIO_INT_PORTC      13
+#define MX1_LCDC_INT            14
+#define MX1_SIM_INT             15
+#define MX1_SIM_DATA_INT        16
+#define MX1_RTC_INT             17
+#define MX1_RTC_SAMINT          18
+#define MX1_UART2_MINT_PFERR    19
+#define MX1_UART2_MINT_RTS      20
+#define MX1_UART2_MINT_DTR      21
+#define MX1_UART2_MINT_UARTC    22
+#define MX1_UART2_MINT_TX       23
+#define MX1_UART2_MINT_RX       24
+#define MX1_UART1_MINT_PFERR    25
+#define MX1_UART1_MINT_RTS      26
+#define MX1_UART1_MINT_DTR      27
+#define MX1_UART1_MINT_UARTC    28
+#define MX1_UART1_MINT_TX       29
+#define MX1_UART1_MINT_RX       30
+#define MX1_VOICE_DAC_INT       31
+#define MX1_VOICE_ADC_INT       32
+#define MX1_PEN_DATA_INT        33
+#define MX1_PWM_INT             34
+#define MX1_SDHC_INT            35
+#define MX1_I2C_INT             39
+#define MX1_CSPI_INT            41
+#define MX1_SSI_TX_INT          42
+#define MX1_SSI_TX_ERR_INT      43
+#define MX1_SSI_RX_INT          44
+#define MX1_SSI_RX_ERR_INT      45
+#define MX1_TOUCH_INT           46
+#define MX1_USBD_INT0           47
+#define MX1_USBD_INT1           48
+#define MX1_USBD_INT2           49
+#define MX1_USBD_INT3           50
+#define MX1_USBD_INT4           51
+#define MX1_USBD_INT5           52
+#define MX1_USBD_INT6           53
+#define MX1_BTSYS_INT           55
+#define MX1_BTTIM_INT           56
+#define MX1_BTWUI_INT           57
+#define MX1_TIM2_INT            58
+#define MX1_TIM1_INT            59
+#define MX1_DMA_ERR             60
+#define MX1_DMA_INT             61
+#define MX1_GPIO_INT_PORTD      62
+#define MX1_WDT_INT             63
 
 /* DMA */
-#define DMA_REQ_UART3_T         2
-#define DMA_REQ_UART3_R         3
-#define DMA_REQ_SSI2_T          4
-#define DMA_REQ_SSI2_R          5
-#define DMA_REQ_CSI_STAT        6
-#define DMA_REQ_CSI_R           7
-#define DMA_REQ_MSHC            8
-#define DMA_REQ_DSPA_DCT_DOUT   9
-#define DMA_REQ_DSPA_DCT_DIN    10
-#define DMA_REQ_DSPA_MAC        11
-#define DMA_REQ_EXT             12
-#define DMA_REQ_SDHC            13
-#define DMA_REQ_SPI1_R          14
-#define DMA_REQ_SPI1_T          15
-#define DMA_REQ_SSI_T           16
-#define DMA_REQ_SSI_R           17
-#define DMA_REQ_ASP_DAC         18
-#define DMA_REQ_ASP_ADC         19
-#define DMA_REQ_USP_EP(x)       (20 + (x))
-#define DMA_REQ_SPI2_R          26
-#define DMA_REQ_SPI2_T          27
-#define DMA_REQ_UART2_T         28
-#define DMA_REQ_UART2_R         29
-#define DMA_REQ_UART1_T         30
-#define DMA_REQ_UART1_R         31
-
-#endif /*  __ASM_ARCH_MXC_MX1_H__ */
+#define MX1_DMA_REQ_UART3_T             2
+#define MX1_DMA_REQ_UART3_R             3
+#define MX1_DMA_REQ_SSI2_T              4
+#define MX1_DMA_REQ_SSI2_R              5
+#define MX1_DMA_REQ_CSI_STAT            6
+#define MX1_DMA_REQ_CSI_R               7
+#define MX1_DMA_REQ_MSHC                8
+#define MX1_DMA_REQ_DSPA_DCT_DOUT       9
+#define MX1_DMA_REQ_DSPA_DCT_DIN        10
+#define MX1_DMA_REQ_DSPA_MAC            11
+#define MX1_DMA_REQ_EXT                 12
+#define MX1_DMA_REQ_SDHC                13
+#define MX1_DMA_REQ_SPI1_R              14
+#define MX1_DMA_REQ_SPI1_T              15
+#define MX1_DMA_REQ_SSI_T               16
+#define MX1_DMA_REQ_SSI_R               17
+#define MX1_DMA_REQ_ASP_DAC             18
+#define MX1_DMA_REQ_ASP_ADC             19
+#define MX1_DMA_REQ_USP_EP(x)           (20 + (x))
+#define MX1_DMA_REQ_SPI2_R              26
+#define MX1_DMA_REQ_SPI2_T              27
+#define MX1_DMA_REQ_UART2_T             28
+#define MX1_DMA_REQ_UART2_R             29
+#define MX1_DMA_REQ_UART1_T             30
+#define MX1_DMA_REQ_UART1_R             31
+
+/*
+ * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS
+ * to not break drivers/usb/gadget/imx_udc.  Should go
+ * away after this driver uses the new name.
+ */
+#define USBD_INT0               MX1_USBD_INT0
+
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
+/* these should go away */
+#define IMX_IO_PHYS MX1_IO_BASE_ADDR
+#define IMX_IO_SIZE MX1_IO_SIZE
+#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
+#define IMX_CS0_PHYS MX1_CS0_PHYS
+#define IMX_CS0_SIZE MX1_CS0_SIZE
+#define IMX_CS1_PHYS MX1_CS1_PHYS
+#define IMX_CS1_SIZE MX1_CS1_SIZE
+#define IMX_CS2_PHYS MX1_CS2_PHYS
+#define IMX_CS2_SIZE MX1_CS2_SIZE
+#define IMX_CS3_PHYS MX1_CS3_PHYS
+#define IMX_CS3_SIZE MX1_CS3_SIZE
+#define IMX_CS4_PHYS MX1_CS4_PHYS
+#define IMX_CS4_SIZE MX1_CS4_SIZE
+#define IMX_CS5_PHYS MX1_CS5_PHYS
+#define IMX_CS5_SIZE MX1_CS5_SIZE
+#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
+#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
+#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
+#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
+#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
+#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
+#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
+#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
+#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
+#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
+#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
+#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
+#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
+#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
+#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
+#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
+#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
+#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
+#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
+#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
+#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
+#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
+#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
+#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
+#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
+#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
+#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
+#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
+#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
+#define INT_SOFTINT MX1_INT_SOFTINT
+#define CSI_INT MX1_CSI_INT
+#define DSPA_MAC_INT MX1_DSPA_MAC_INT
+#define DSPA_INT MX1_DSPA_INT
+#define COMP_INT MX1_COMP_INT
+#define MSHC_XINT MX1_MSHC_XINT
+#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
+#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
+#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
+#define LCDC_INT MX1_LCDC_INT
+#define SIM_INT MX1_SIM_INT
+#define SIM_DATA_INT MX1_SIM_DATA_INT
+#define RTC_INT MX1_RTC_INT
+#define RTC_SAMINT MX1_RTC_SAMINT
+#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
+#define UART2_MINT_RTS MX1_UART2_MINT_RTS
+#define UART2_MINT_DTR MX1_UART2_MINT_DTR
+#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
+#define UART2_MINT_TX MX1_UART2_MINT_TX
+#define UART2_MINT_RX MX1_UART2_MINT_RX
+#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
+#define UART1_MINT_RTS MX1_UART1_MINT_RTS
+#define UART1_MINT_DTR MX1_UART1_MINT_DTR
+#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
+#define UART1_MINT_TX MX1_UART1_MINT_TX
+#define UART1_MINT_RX MX1_UART1_MINT_RX
+#define VOICE_DAC_INT MX1_VOICE_DAC_INT
+#define VOICE_ADC_INT MX1_VOICE_ADC_INT
+#define PEN_DATA_INT MX1_PEN_DATA_INT
+#define PWM_INT MX1_PWM_INT
+#define SDHC_INT MX1_SDHC_INT
+#define I2C_INT MX1_I2C_INT
+#define CSPI_INT MX1_CSPI_INT
+#define SSI_TX_INT MX1_SSI_TX_INT
+#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
+#define SSI_RX_INT MX1_SSI_RX_INT
+#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
+#define TOUCH_INT MX1_TOUCH_INT
+#define USBD_INT1 MX1_USBD_INT1
+#define USBD_INT2 MX1_USBD_INT2
+#define USBD_INT3 MX1_USBD_INT3
+#define USBD_INT4 MX1_USBD_INT4
+#define USBD_INT5 MX1_USBD_INT5
+#define USBD_INT6 MX1_USBD_INT6
+#define BTSYS_INT MX1_BTSYS_INT
+#define BTTIM_INT MX1_BTTIM_INT
+#define BTWUI_INT MX1_BTWUI_INT
+#define TIM2_INT MX1_TIM2_INT
+#define TIM1_INT MX1_TIM1_INT
+#define DMA_ERR MX1_DMA_ERR
+#define DMA_INT MX1_DMA_INT
+#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
+#define WDT_INT MX1_WDT_INT
+#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
+#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
+#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
+#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
+#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
+#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
+#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
+#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
+#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
+#define DMA_REQ_EXT MX1_DMA_REQ_EXT
+#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
+#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
+#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
+#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
+#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
+#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
+#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
+#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
+#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
+#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
+#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
+#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
+#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
+#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
+#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+
+#endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index bb297d8765a..ed98b9c9f38 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -22,8 +22,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR             0x10000000
 #define MX21_AIPI_BASE_ADDR_VIRT        0xf4000000
@@ -92,6 +92,11 @@
 
 #define MX21_IRAM_BASE_ADDR             0xffffe800      /* internal ram */
 
+#define MX21_IO_ADDRESS(x) (                                            \
+        IMX_IO_ADDRESS(x, MX21_AIPI) ?:                                 \
+        IMX_IO_ADDRESS(x, MX21_SAHB1) ?:                                \
+        IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3          6
 #define MX21_INT_GPIO           8
@@ -179,6 +184,7 @@
 #define MX21_DMA_REQ_CSI_STAT   30
 #define MX21_DMA_REQ_CSI_RX     31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
 #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
 #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
 #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
 #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 854e2dc5848..4eb6e334bda 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -22,27 +22,27 @@
 #define MX25_GPIO3_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
 #define MX25_GPIO4_BASE_ADDR_VIRT       (MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
 
-#define MX25_AIPS1_IO_ADDRESS(x)  \
-        (((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x)  \
-        (((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x)  \
-        (((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+#define MX25_IO_ADDRESS(x) (                                    \
+        IMX_IO_ADDRESS(x, MX25_AIPS1) ?:                        \
+        IMX_IO_ADDRESS(x, MX25_AIPS2) ?:                        \
+        IMX_IO_ADDRESS(x, MX25_AVIC))
 
-#define __in_range(addr, name)  ((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x)                                      \
-        (void __force __iomem *)                                \
-        (__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) : \
-        __in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :  \
-        __in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :    \
-        0xDEADBEEF)
-
-#define UART1_BASE_ADDR                 0x43f90000
-#define UART2_BASE_ADDR                 0x43f94000
+#define MX25_UART1_BASE_ADDR            0x43f90000
+#define MX25_UART2_BASE_ADDR            0x43f94000
 
 #define MX25_FEC_BASE_ADDR              0x50038000
+#define MX25_NFC_BASE_ADDR              0xbb000000
+#define MX25_DRYICE_BASE_ADDR           0x53ffc000
+#define MX25_LCDC_BASE_ADDR             0x53fbc000
 
+#define MX25_INT_DRYICE 25
 #define MX25_INT_FEC    57
+#define MX25_INT_NANDFC 33
+#define MX25_INT_LCDC   39
+
+#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
+#define UART1_BASE_ADDR                 MX25_UART1_BASE_ADDR
+#define UART2_BASE_ADDR                 MX25_UART2_BASE_ADDR
+#endif
 
-#endif /* __MACH_MX25_H__ */
+#endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index e2ae19f5171..bae9cd75bee 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -21,8 +21,12 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
 
 #define MX27_AIPI_BASE_ADDR             0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT        0xf4000000
@@ -109,11 +113,31 @@
 #define MX27_M3IF_BASE_ADDR                     (MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR               (MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)   (MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)                    (MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)                    (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)                    (MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR       0xdc000000
 
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR             0xffff4c00      /* internal ram */
 
+#define MX27_IO_ADDRESS(x) (                                            \
+        IMX_IO_ADDRESS(x, MX27_AIPI) ?:                                 \
+        IMX_IO_ADDRESS(x, MX27_SAHB1) ?:                                \
+        IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+                unsigned upper, unsigned lower, unsigned addional)
+{
+        __raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+        __raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+        __raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2           1
 #define MX27_INT_GPT6           2
@@ -225,6 +249,7 @@
 extern int mx27_revision(void);
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
 #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@ extern int mx27_revision(void);
 #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
 #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
 #define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index f2eaf140ed0..afb895a0b5b 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -20,8 +20,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
@@ -176,6 +176,7 @@
 #define MX2x_DMA_REQ_CSI_STAT   30
 #define MX2x_DMA_REQ_CSI_RX     31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
 #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
 #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
 #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
 #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index b8b47d139eb..fb90e119c2b 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -107,8 +114,30 @@
 #define MX31_EMI_CTL_BASE_ADDR                  (MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR               MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)   (MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)                    (MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)                    (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)                    (MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR       0xbc000000
 
+#define MX31_IO_ADDRESS(x) (                                            \
+        IMX_IO_ADDRESS(x, MX31_AIPS1) ?:                                \
+        IMX_IO_ADDRESS(x, MX31_AIPS2) ?:                                \
+        IMX_IO_ADDRESS(x, MX31_AVIC) ?:                                 \
+        IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:                               \
+        IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+                unsigned upper, unsigned lower, unsigned addional)
+{
+        __raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+        __raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+        __raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3           3
 #define MX31_INT_I2C2           4
 #define MX31_INT_MPEG4_ENCODER  5
@@ -186,6 +215,7 @@
 #define MX31_SYSTEM_REV_MIN             MX31_CHIP_REV_1_0
 #define MX31_SYSTEM_REV_NUM             3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
 #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
 #define MXC_INT_UART5 MX31_INT_UART5
 #define MXC_INT_CCM MX31_INT_CCM
 #define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index af871bce35b..526a55842ae 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
 /*
  * IRAM
  */
@@ -104,6 +106,13 @@
 #define MX35_NFC_BASE_ADDR              0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR       0xbc000000
 
+#define MX35_IO_ADDRESS(x) (                                            \
+        IMX_IO_ADDRESS(x, MX35_AIPS1) ?:                                \
+        IMX_IO_ADDRESS(x, MX35_AIPS2) ?:                                \
+        IMX_IO_ADDRESS(x, MX35_AVIC) ?:                                 \
+        IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:                               \
+        IMX_IO_ADDRESS(x, MX35_SPBA0))
+
 /*
  * Interrupt numbers
  */
@@ -180,6 +189,7 @@
 #define MX35_SYSTEM_REV_MIN             MX35_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM             3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
 #define MXC_INT_MLB MX35_INT_MLB
 #define MXC_INT_SPDIF MX35_INT_SPDIF
 #define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index be69272407a..7a356de385f 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
 
 /*
  * MX31 memory map:
@@ -269,6 +269,7 @@ static inline int mx31_revision(void)
 }
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@ static inline int mx31_revision(void)
 #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
 #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
new file mode 100644
index 00000000000..771532b6b4a
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -0,0 +1,454 @@
+#ifndef __ASM_ARCH_MXC_MX51_H__
+#define __ASM_ARCH_MXC_MX51_H__
+
+/*
+ * MX51 memory map:
+ *
+ *
+ * Virt         Phys            Size    What
+ * ---------------------------------------------------------------------------
+ * FA3E0000     1FFE0000        128K    IRAM (SCCv2 RAM)
+ *              30000000        256M    GPU
+ *              40000000        512M    IPU
+ * FA200000     60000000        1M      DEBUG
+ * FB100000     70000000        1M      SPBA 0
+ * FB000000     73F00000        1M      AIPS 1
+ * FB200000     83F00000        1M      AIPS 2
+ * FA100000     8FFFC000        16K     TZIC (interrupt controller)
+ *              90000000        256M    CSD0 SDRAM/DDR
+ *              A0000000        256M    CSD1 SDRAM/DDR
+ *              B0000000        128M    CS0 Flash
+ *              B8000000        128M    CS1 Flash
+ *              C0000000        128M    CS2 Flash
+ *              C8000000        64M     CS3 Flash
+ *              CC000000        32M     CS4 SRAM
+ *              CE000000        32M     CS5 SRAM
+ * F9000000     CFFF0000        64K     NFC (NAND Flash AXI)
+ *
+ */
+
+/*
+ * IRAM
+ */
+#define MX51_IRAM_BASE_ADDR             0x1FFE0000      /* internal ram */
+#define MX51_IRAM_BASE_ADDR_VIRT        0xFA3E0000
+#define MX51_IRAM_PARTITIONS            16
+#define MX51_IRAM_PARTITIONS_TO1        12
+#define MX51_IRAM_SIZE          (MX51_IRAM_PARTITIONS * SZ_8K)  /* 128KB */
+
+/*
+ * NFC
+ */
+#define MX51_NFC_AXI_BASE_ADDR          0xCFFF0000      /* NAND flash AXI */
+#define MX51_NFC_AXI_BASE_ADDR_VIRT     0xF9000000
+#define MX51_NFC_AXI_SIZE               SZ_64K
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX51_GPU_BASE_ADDR              0x20000000
+#define MX51_GPU2D_BASE_ADDR            0xD0000000
+
+#define MX51_TZIC_BASE_ADDR             0x8FFFC000
+#define MX51_TZIC_BASE_ADDR_VIRT        0xFA100000
+#define MX51_TZIC_SIZE                  SZ_16K
+
+#define MX51_DEBUG_BASE_ADDR            0x60000000
+#define MX51_DEBUG_BASE_ADDR_VIRT       0xFA200000
+#define MX51_DEBUG_SIZE                 SZ_1M
+#define MX51_ETB_BASE_ADDR              (MX51_DEBUG_BASE_ADDR + 0x00001000)
+#define MX51_ETM_BASE_ADDR              (MX51_DEBUG_BASE_ADDR + 0x00002000)
+#define MX51_TPIU_BASE_ADDR             (MX51_DEBUG_BASE_ADDR + 0x00003000)
+#define MX51_CTI0_BASE_ADDR             (MX51_DEBUG_BASE_ADDR + 0x00004000)
+#define MX51_CTI1_BASE_ADDR             (MX51_DEBUG_BASE_ADDR + 0x00005000)
+#define MX51_CTI2_BASE_ADDR             (MX51_DEBUG_BASE_ADDR + 0x00006000)
+#define MX51_CTI3_BASE_ADDR             (MX51_DEBUG_BASE_ADDR + 0x00007000)
+#define MX51_CORTEX_DBG_BASE_ADDR       (MX51_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX51_SPBA0_BASE_ADDR            0x70000000
+#define MX51_SPBA0_BASE_ADDR_VIRT       0xFB100000
+#define MX51_SPBA0_SIZE                 SZ_1M
+
+#define MX51_MMC_SDHC1_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x00004000)
+#define MX51_MMC_SDHC2_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x00008000)
+#define MX51_UART3_BASE_ADDR            (MX51_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX51_CSPI1_BASE_ADDR            (MX51_SPBA0_BASE_ADDR + 0x00010000)
+#define MX51_SSI2_BASE_ADDR             (MX51_SPBA0_BASE_ADDR + 0x00014000)
+#define MX51_MMC_SDHC3_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x00020000)
+#define MX51_MMC_SDHC4_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x00024000)
+#define MX51_SPDIF_BASE_ADDR            (MX51_SPBA0_BASE_ADDR + 0x00028000)
+#define MX51_ATA_DMA_BASE_ADDR          (MX51_SPBA0_BASE_ADDR + 0x00030000)
+#define MX51_SLIM_DMA_BASE_ADDR         (MX51_SPBA0_BASE_ADDR + 0x00034000)
+#define MX51_HSI2C_DMA_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x00038000)
+#define MX51_SPBA_CTRL_BASE_ADDR        (MX51_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * defines for SPBA modules
+ */
+#define MX51_SPBA_SDHC1 0x04
+#define MX51_SPBA_SDHC2 0x08
+#define MX51_SPBA_UART3 0x0C
+#define MX51_SPBA_CSPI1 0x10
+#define MX51_SPBA_SSI2  0x14
+#define MX51_SPBA_SDHC3 0x20
+#define MX51_SPBA_SDHC4 0x24
+#define MX51_SPBA_SPDIF 0x28
+#define MX51_SPBA_ATA   0x30
+#define MX51_SPBA_SLIM  0x34
+#define MX51_SPBA_HSI2C 0x38
+#define MX51_SPBA_CTRL  0x3C
+
+/*
+ * AIPS 1
+ */
+#define MX51_AIPS1_BASE_ADDR    0x73F00000
+#define MX51_AIPS1_BASE_ADDR_VIRT       0xFB000000
+#define MX51_AIPS1_SIZE         SZ_1M
+
+#define MX51_OTG_BASE_ADDR      (MX51_AIPS1_BASE_ADDR + 0x00080000)
+#define MX51_GPIO1_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x00084000)
+#define MX51_GPIO2_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x00088000)
+#define MX51_GPIO3_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX51_GPIO4_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x00090000)
+#define MX51_KPP_BASE_ADDR      (MX51_AIPS1_BASE_ADDR + 0x00094000)
+#define MX51_WDOG_BASE_ADDR     (MX51_AIPS1_BASE_ADDR + 0x00098000)
+#define MX51_WDOG2_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX51_GPT1_BASE_ADDR     (MX51_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX51_SRTC_BASE_ADDR     (MX51_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX51_IOMUXC_BASE_ADDR   (MX51_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX51_EPIT1_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX51_EPIT2_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX51_PWM1_BASE_ADDR     (MX51_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX51_PWM2_BASE_ADDR     (MX51_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX51_UART1_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX51_UART2_BASE_ADDR    (MX51_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX51_SRC_BASE_ADDR      (MX51_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX51_CCM_BASE_ADDR      (MX51_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX51_GPC_BASE_ADDR      (MX51_AIPS1_BASE_ADDR + 0x000D8000)
+
+/*
+ * Defines for modules using static and dynamic DMA channels
+ */
+#define MX51_MXC_DMA_CHANNEL_IRAM       30
+#define MX51_MXC_DMA_CHANNEL_SPDIF_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART1_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART2_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_UART3_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC1       MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MMC2       MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_RX    MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI1_TX    MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_SSI2_RX    MXC_DMA_DYNAMIC_CHANNEL
+#ifdef CONFIG_SDMA_IRAM
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX    (MX51_MXC_DMA_CHANNEL_IRAM + 1)
+#else                           /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_SSI2_TX    MXC_DMA_DYNAMIC_CHANNEL
+#endif                          /*CONFIG_SDMA_IRAM */
+#define MX51_MXC_DMA_CHANNEL_CSPI1_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI1_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI2_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_RX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_CSPI3_TX   MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_RX     MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_ATA_TX     MXC_DMA_DYNAMIC_CHANNEL
+#define MX51_MXC_DMA_CHANNEL_MEMORY     MXC_DMA_DYNAMIC_CHANNEL
+
+/*
+ * AIPS 2
+ */
+#define MX51_AIPS2_BASE_ADDR            0x83F00000
+#define MX51_AIPS2_BASE_ADDR_VIRT       0xFB200000
+#define MX51_AIPS2_SIZE                 SZ_1M
+
+#define MX51_PLL1_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x00080000)
+#define MX51_PLL2_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x00084000)
+#define MX51_PLL3_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x00088000)
+#define MX51_AHBMAX_BASE_ADDR   (MX51_AIPS2_BASE_ADDR + 0x00094000)
+#define MX51_IIM_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x00098000)
+#define MX51_CSU_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX51_ARM_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX51_OWIRE_BASE_ADDR    (MX51_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX51_FIRI_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX51_CSPI2_BASE_ADDR    (MX51_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX51_SDMA_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX51_SCC_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX51_ROMCP_BASE_ADDR    (MX51_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX51_RTIC_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX51_CSPI3_BASE_ADDR    (MX51_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX51_I2C2_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX51_I2C1_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX51_SSI1_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX51_AUDMUX_BASE_ADDR   (MX51_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX51_M4IF_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX51_ESDCTL_BASE_ADDR   (MX51_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX51_WEIM_BASE_ADDR     (MX51_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX51_NFC_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX51_EMI_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX51_ATA_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000E0000)
+#define MX51_SIM_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX51_SSI3BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX51_MXC_FEC_BASE_ADDR  (MX51_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX51_TVE_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX51_VPU_BASE_ADDR      (MX51_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX51_SAHARA_BASE_ADDR   (MX51_AIPS2_BASE_ADDR + 0x000F8000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX51_GPU_CTRL_BASE_ADDR         0x30000000
+#define MX51_IPU_CTRL_BASE_ADDR         0x40000000
+#define MX51_CSD0_BASE_ADDR             0x90000000
+#define MX51_CSD1_BASE_ADDR             0xA0000000
+#define MX51_CS0_BASE_ADDR              0xB0000000
+#define MX51_CS1_BASE_ADDR              0xB8000000
+#define MX51_CS2_BASE_ADDR              0xC0000000
+#define MX51_CS3_BASE_ADDR              0xC8000000
+#define MX51_CS4_BASE_ADDR              0xCC000000
+#define MX51_CS5_BASE_ADDR              0xCE000000
+
+/* Does given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size)                    \
+        (((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Does given address belongs to the specified named `module'? */
+#define MX51_IS_MODULE(addr, module)                           \
+        ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
+                                MX51_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MX51_IO_ADDRESS(x)                                      \
+        (void __iomem *)                                        \
+        (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) :    \
+        MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) :     \
+        MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) :   \
+        MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) :   \
+        MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) :   \
+        MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) :   \
+        MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
+        0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MX51_IRAM_IO_ADDRESS(x)  \
+        (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
+
+#define MX51_TZIC_IO_ADDRESS(x)  \
+        (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
+
+#define MX51_DEBUG_IO_ADDRESS(x)  \
+        (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
+
+#define MX51_SPBA0_IO_ADDRESS(x)  \
+        (((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
+
+#define MX51_AIPS1_IO_ADDRESS(x)  \
+        (((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+
+#define MX51_AIPS2_IO_ADDRESS(x)  \
+        (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
+
+#define MX51_NFC_AXI_IO_ADDRESS(x) \
+        (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
+
+#define MX51_IS_MEM_DEVICE_NONSHARED(x)         0
+
+/*
+ * DMA request assignments
+ */
+#define MX51_DMA_REQ_SSI3_TX1   47
+#define MX51_DMA_REQ_SSI3_RX1   46
+#define MX51_DMA_REQ_SPDIF      45
+#define MX51_DMA_REQ_UART3_TX   44
+#define MX51_DMA_REQ_UART3_RX   43
+#define MX51_DMA_REQ_SLIM_B_TX  42
+#define MX51_DMA_REQ_SDHC4      41
+#define MX51_DMA_REQ_SDHC3      40
+#define MX51_DMA_REQ_CSPI_TX    39
+#define MX51_DMA_REQ_CSPI_RX    38
+#define MX51_DMA_REQ_SSI3_TX2   37
+#define MX51_DMA_REQ_IPU        36
+#define MX51_DMA_REQ_SSI3_RX2   35
+#define MX51_DMA_REQ_EPIT2      34
+#define MX51_DMA_REQ_CTI2_1     33
+#define MX51_DMA_REQ_EMI_WR     32
+#define MX51_DMA_REQ_CTI2_0     31
+#define MX51_DMA_REQ_EMI_RD     30
+#define MX51_DMA_REQ_SSI1_TX1   29
+#define MX51_DMA_REQ_SSI1_RX1   28
+#define MX51_DMA_REQ_SSI1_TX2   27
+#define MX51_DMA_REQ_SSI1_RX2   26
+#define MX51_DMA_REQ_SSI2_TX1   25
+#define MX51_DMA_REQ_SSI2_RX1   24
+#define MX51_DMA_REQ_SSI2_TX2   23
+#define MX51_DMA_REQ_SSI2_RX2   22
+#define MX51_DMA_REQ_SDHC2      21
+#define MX51_DMA_REQ_SDHC1      20
+#define MX51_DMA_REQ_UART1_TX   19
+#define MX51_DMA_REQ_UART1_RX   18
+#define MX51_DMA_REQ_UART2_TX   17
+#define MX51_DMA_REQ_UART2_RX   16
+#define MX51_DMA_REQ_GPU        15
+#define MX51_DMA_REQ_EXTREQ1    14
+#define MX51_DMA_REQ_FIRI_TX    13
+#define MX51_DMA_REQ_FIRI_RX    12
+#define MX51_DMA_REQ_HS_I2C_RX  11
+#define MX51_DMA_REQ_HS_I2C_TX  10
+#define MX51_DMA_REQ_CSPI2_TX   9
+#define MX51_DMA_REQ_CSPI2_RX   8
+#define MX51_DMA_REQ_CSPI1_TX   7
+#define MX51_DMA_REQ_CSPI1_RX   6
+#define MX51_DMA_REQ_SLIM_B     5
+#define MX51_DMA_REQ_ATA_TX_END 4
+#define MX51_DMA_REQ_ATA_TX     3
+#define MX51_DMA_REQ_ATA_RX     2
+#define MX51_DMA_REQ_GPC        1
+#define MX51_DMA_REQ_VPU        0
+
+/*
+ * Interrupt numbers
+ */
+#define MX51_MXC_INT_BASE       0
+#define MX51_MXC_INT_RESV0      0
+#define MX51_MXC_INT_MMC_SDHC1  1
+#define MX51_MXC_INT_MMC_SDHC2  2
+#define MX51_MXC_INT_MMC_SDHC3  3
+#define MX51_MXC_INT_MMC_SDHC4  4
+#define MX51_MXC_INT_RESV5      5
+#define MX51_MXC_INT_SDMA       6
+#define MX51_MXC_INT_IOMUX      7
+#define MX51_MXC_INT_NFC        8
+#define MX51_MXC_INT_VPU        9
+#define MX51_MXC_INT_IPU_ERR    10
+#define MX51_MXC_INT_IPU_SYN    11
+#define MX51_MXC_INT_GPU        12
+#define MX51_MXC_INT_RESV13     13
+#define MX51_MXC_INT_USB_H1     14
+#define MX51_MXC_INT_EMI        15
+#define MX51_MXC_INT_USB_H2     16
+#define MX51_MXC_INT_USB_H3     17
+#define MX51_MXC_INT_USB_OTG    18
+#define MX51_MXC_INT_SAHARA_H0  19
+#define MX51_MXC_INT_SAHARA_H1  20
+#define MX51_MXC_INT_SCC_SMN    21
+#define MX51_MXC_INT_SCC_STZ    22
+#define MX51_MXC_INT_SCC_SCM    23
+#define MX51_MXC_INT_SRTC_NTZ   24
+#define MX51_MXC_INT_SRTC_TZ    25
+#define MX51_MXC_INT_RTIC       26
+#define MX51_MXC_INT_CSU        27
+#define MX51_MXC_INT_SLIM_B     28
+#define MX51_MXC_INT_SSI1       29
+#define MX51_MXC_INT_SSI2       30
+#define MX51_MXC_INT_UART1      31
+#define MX51_MXC_INT_UART2      32
+#define MX51_MXC_INT_UART3      33
+#define MX51_MXC_INT_RESV34     34
+#define MX51_MXC_INT_RESV35     35
+#define MX51_MXC_INT_CSPI1      36
+#define MX51_MXC_INT_CSPI2      37
+#define MX51_MXC_INT_CSPI       38
+#define MX51_MXC_INT_GPT        39
+#define MX51_MXC_INT_EPIT1      40
+#define MX51_MXC_INT_EPIT2      41
+#define MX51_MXC_INT_GPIO1_INT7 42
+#define MX51_MXC_INT_GPIO1_INT6 43
+#define MX51_MXC_INT_GPIO1_INT5 44
+#define MX51_MXC_INT_GPIO1_INT4 45
+#define MX51_MXC_INT_GPIO1_INT3 46
+#define MX51_MXC_INT_GPIO1_INT2 47
+#define MX51_MXC_INT_GPIO1_INT1 48
+#define MX51_MXC_INT_GPIO1_INT0 49
+#define MX51_MXC_INT_GPIO1_LOW  50
+#define MX51_MXC_INT_GPIO1_HIGH 51
+#define MX51_MXC_INT_GPIO2_LOW  52
+#define MX51_MXC_INT_GPIO2_HIGH 53
+#define MX51_MXC_INT_GPIO3_LOW  54
+#define MX51_MXC_INT_GPIO3_HIGH 55
+#define MX51_MXC_INT_GPIO4_LOW  56
+#define MX51_MXC_INT_GPIO4_HIGH 57
+#define MX51_MXC_INT_WDOG1      58
+#define MX51_MXC_INT_WDOG2      59
+#define MX51_MXC_INT_KPP        60
+#define MX51_MXC_INT_PWM1       61
+#define MX51_MXC_INT_I2C1       62
+#define MX51_MXC_INT_I2C2       63
+#define MX51_MXC_INT_HS_I2C     64
+#define MX51_MXC_INT_RESV65     65
+#define MX51_MXC_INT_RESV66     66
+#define MX51_MXC_INT_SIM_IPB    67
+#define MX51_MXC_INT_SIM_DAT    68
+#define MX51_MXC_INT_IIM        69
+#define MX51_MXC_INT_ATA        70
+#define MX51_MXC_INT_CCM1       71
+#define MX51_MXC_INT_CCM2       72
+#define MX51_MXC_INT_GPC1       73
+#define MX51_MXC_INT_GPC2       74
+#define MX51_MXC_INT_SRC        75
+#define MX51_MXC_INT_NM         76
+#define MX51_MXC_INT_PMU        77
+#define MX51_MXC_INT_CTI_IRQ    78
+#define MX51_MXC_INT_CTI1_TG0   79
+#define MX51_MXC_INT_CTI1_TG1   80
+#define MX51_MXC_INT_MCG_ERR    81
+#define MX51_MXC_INT_MCG_TMR    82
+#define MX51_MXC_INT_MCG_FUNC   83
+#define MX51_MXC_INT_GPU2_IRQ   84
+#define MX51_MXC_INT_GPU2_BUSY  85
+#define MX51_MXC_INT_RESV86     86
+#define MX51_MXC_INT_FEC        87
+#define MX51_MXC_INT_OWIRE      88
+#define MX51_MXC_INT_CTI1_TG2   89
+#define MX51_MXC_INT_SJC        90
+#define MX51_MXC_INT_SPDIF      91
+#define MX51_MXC_INT_TVE        92
+#define MX51_MXC_INT_FIRI       93
+#define MX51_MXC_INT_PWM2       94
+#define MX51_MXC_INT_SLIM_EXP   95
+#define MX51_MXC_INT_SSI3       96
+#define MX51_MXC_INT_EMI_BOOT   97
+#define MX51_MXC_INT_CTI1_TG3   98
+#define MX51_MXC_INT_SMC_RX     99
+#define MX51_MXC_INT_VPU_IDLE   100
+#define MX51_MXC_INT_EMI_NFC    101
+#define MX51_MXC_INT_GPU_IDLE   102
+
+/* silicon revisions specific to i.MX51 */
+#define MX51_CHIP_REV_1_0       0x10
+#define MX51_CHIP_REV_1_1       0x11
+#define MX51_CHIP_REV_1_2       0x12
+#define MX51_CHIP_REV_1_3       0x13
+#define MX51_CHIP_REV_2_0       0x20
+#define MX51_CHIP_REV_2_1       0x21
+#define MX51_CHIP_REV_2_2       0x22
+#define MX51_CHIP_REV_2_3       0x23
+#define MX51_CHIP_REV_3_0       0x30
+#define MX51_CHIP_REV_3_1       0x31
+#define MX51_CHIP_REV_3_2       0x32
+
+/* Mandatory defines used globally */
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+extern unsigned int system_rev;
+
+static inline unsigned int mx51_revision(void)
+{
+        return system_rev;
+}
+#endif
+
+#endif  /*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 51990536b84..a790bf21297 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27            27
 #define MXC_CPU_MX31            31
 #define MXC_CPU_MX35            35
+#define MXC_CPU_MX51            51
 #define MXC_CPU_MXC91231        91231
 
 #ifndef __ASSEMBLY__
@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()          (0)
 #endif
 
+#ifdef CONFIG_ARCH_MX5
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX51
+# endif
+# define cpu_is_mx51()          (mxc_cpu_type == MXC_CPU_MX51)
+#else
+# define cpu_is_mx51()          (0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
@@ -121,9 +134,10 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
 #define cpu_is_mx3()    (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 81484d1ef23..5182b986b78 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -184,60 +184,22 @@
 #define MXC91231_CS4_BASE_ADDR          0xB4000000
 #define MXC91231_CS5_BASE_ADDR          0xB6000000
 
-/* Is given address belongs to the specified memory region? */
-#define ADDRESS_IN_REGION(addr, start, size) \
-        (((addr) >= (start)) && ((addr) < (start)+(size)))
-
-/* Is given address belongs to the specified named `module'? */
-#define MXC91231_IS_MODULE(addr, module) \
-        ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
-                                MXC91231_ ## module ## _SIZE)
 /*
  * This macro defines the physical to virtual address mapping for all the
  * peripheral modules. It is used by passing in the physical address as x
  * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-
-#define MXC91231_IO_ADDRESS(x) \
-        (void __iomem *) \
-        (MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
-         MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
-         0xDEADBEEF)
-
-
-/*
- * define the address mapping macros: in physical address order
+ * it returns 0.
  */
-#define MXC91231_L2CC_IO_ADDRESS(x)  \
-        (((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS1_IO_ADDRESS(x)  \
-        (((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA0_IO_ADDRESS(x)  \
-        (((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
-
-#define MXC91231_SPBA1_IO_ADDRESS(x)  \
-        (((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
-
-#define MXC91231_AIPS2_IO_ADDRESS(x)  \
-        (((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
-
-#define MXC91231_ROMP_IO_ADDRESS(x)  \
-        (((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
-
-#define MXC91231_AVIC_IO_ADDRESS(x)  \
-        (((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
 
-#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
-        (((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+#define MXC91231_IO_ADDRESS(x) (                                        \
+        IMX_IO_ADDRESS(x, MXC91231_L2CC) ?:                             \
+        IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?:                           \
+        IMX_IO_ADDRESS(x, MXC91231_ROMP) ?:                             \
+        IMX_IO_ADDRESS(x, MXC91231_AVIC) ?:                             \
+        IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?:                            \
+        IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?:                            \
+        IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?:                            \
+        IMX_IO_ADDRESS(x, MXC91231_AIPS2))
 
 /*
  * Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 8f796239393..4b9b8368c0c 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -22,6 +22,10 @@
 #define MXC_EHCI_POWER_PINS_ENABLED     (1 << 5)
 #define MXC_EHCI_TTL_ENABLED            (1 << 6)
 
+#define MXC_EHCI_INTERNAL_PHY           (1 << 7)
+#define MXC_EHCI_IPPUE_DOWN             (1 << 8)
+#define MXC_EHCI_IPPUE_UP               (1 << 9)
+
 struct mxc_usbh_platform_data {
         int (*init)(struct platform_device *pdev);
         int (*exit)(struct platform_device *pdev);
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
new file mode 100644
index 00000000000..c34ded523f1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ssi.h
@@ -0,0 +1,18 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+        unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+        void (*ac97_reset) (struct snd_ac97 *ac97);
+        void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 527a6c24788..024416ed11c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE         16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE         16000000
+#elif defined CONFIG_ARCH_MX5
+#define CLOCK_TICK_RATE         8000000
 #elif defined CONFIG_ARCH_MXC91231
 #define CLOCK_TICK_RATE         13000000
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 4d5d395ad63..52e476a150c 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -1,8 +1,6 @@
 /*
  *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
- *
- *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) Shane Nay (shane@minirl.com)
  *
@@ -25,7 +23,6 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static unsigned long uart_base;
@@ -60,7 +57,9 @@ static void putc(int ch)
         UART(TXR) = ch;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 #define MX1_UART1_BASE_ADDR     0x00206000
 #define MX25_UART1_BASE_ADDR    0x43f90000
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
deleted file mode 100644
index a37163ce280..00000000000
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- *  arch/arm/mach-mxc/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <asm/mach/map.h>
-#include <mach/iomux.h>
-
-void mxc_gpio_mode(int gpio_mode)
-{
-        unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-        unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
-        unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
-        unsigned int tmp;
-
-        /* Pullup enable */
-        tmp = __raw_readl(VA_GPIO_BASE + MXC_PUEN(port));
-        if (gpio_mode & GPIO_PUEN)
-                tmp |= (1 << pin);
-        else
-                tmp &= ~(1 << pin);
-        __raw_writel(tmp, VA_GPIO_BASE + MXC_PUEN(port));
-
-        /* Data direction */
-        tmp = __raw_readl(VA_GPIO_BASE + MXC_DDIR(port));
-        if (gpio_mode & GPIO_OUT)
-                tmp |= 1 << pin;
-        else
-                tmp &= ~(1 << pin);
-        __raw_writel(tmp, VA_GPIO_BASE + MXC_DDIR(port));
-
-        /* Primary / alternate function */
-        tmp = __raw_readl(VA_GPIO_BASE + MXC_GPR(port));
-        if (gpio_mode & GPIO_AF)
-                tmp |= (1 << pin);
-        else
-                tmp &= ~(1 << pin);
-        __raw_writel(tmp, VA_GPIO_BASE + MXC_GPR(port));
-
-        /* use as gpio? */
-        tmp = __raw_readl(VA_GPIO_BASE + MXC_GIUS(port));
-        if (gpio_mode & (GPIO_PF | GPIO_AF))
-                tmp &= ~(1 << pin);
-        else
-                tmp |= (1 << pin);
-        __raw_writel(tmp, VA_GPIO_BASE + MXC_GIUS(port));
-
-        if (pin < 16) {
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR1(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= (ocr << (pin * 2));
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR1(port));
-
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA1(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA1(port));
-
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB1(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB1(port));
-        } else {
-                pin -= 16;
-
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_OCR2(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= (ocr << (pin * 2));
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_OCR2(port));
-
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFA2(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFA2(port));
-
-                tmp = __raw_readl(VA_GPIO_BASE + MXC_ICONFB2(port));
-                tmp &= ~(3 << (pin * 2));
-                tmp |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
-                __raw_writel(tmp, VA_GPIO_BASE + MXC_ICONFB2(port));
-        }
-}
-EXPORT_SYMBOL(mxc_gpio_mode);
-
-int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-                const char *label)
-{
-        const int *p = pin_list;
-        int i;
-        unsigned gpio;
-        unsigned mode;
-        int ret = -EINVAL;
-
-        for (i = 0; i < count; i++) {
-                gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-                mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-                if (gpio >= (GPIO_PORT_MAX + 1) * 32)
-                        goto setup_error;
-
-                ret = gpio_request(gpio, label);
-                if (ret)
-                        goto setup_error;
-
-                mxc_gpio_mode(gpio | mode);
-
-                p++;
-        }
-        return 0;
-
-setup_error:
-        mxc_gpio_release_multiple_pins(pin_list, i);
-        return ret;
-}
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
-
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-        const int *p = pin_list;
-        int i;
-
-        for (i = 0; i < count; i++) {
-                unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-                gpio_free(gpio);
-                p++;
-        }
-
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
new file mode 100644
index 00000000000..960a02cbcba
--- /dev/null
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/plat-mxc/iomux-v1.c
+ *
+ * Copyright (C) 2004 Sascha Hauer, Synertronixx GmbH
+ * Copyright (C) 2009 Uwe Kleine-Koenig, Pengutronix
+ *
+ * Common code for i.MX1, i.MX21 and i.MX27
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v1.h>
+
+static void __iomem *imx_iomuxv1_baseaddr;
+static unsigned imx_iomuxv1_numports;
+
+static inline unsigned long imx_iomuxv1_readl(unsigned offset)
+{
+        return __raw_readl(imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_writel(unsigned long val, unsigned offset)
+{
+        __raw_writel(val, imx_iomuxv1_baseaddr + offset);
+}
+
+static inline void imx_iomuxv1_rmwl(unsigned offset,
+                unsigned long mask, unsigned long value)
+{
+        unsigned long reg = imx_iomuxv1_readl(offset);
+
+        reg &= ~mask;
+        reg |= value;
+
+        imx_iomuxv1_writel(reg, offset);
+}
+
+static inline void imx_iomuxv1_set_puen(
+                unsigned int port, unsigned int pin, int on)
+{
+        unsigned long mask = 1 << pin;
+
+        imx_iomuxv1_rmwl(MXC_PUEN(port), mask, on ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ddir(
+                unsigned int port, unsigned int pin, int out)
+{
+        unsigned long mask = 1 << pin;
+
+        imx_iomuxv1_rmwl(MXC_DDIR(port), mask, out ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gpr(
+                unsigned int port, unsigned int pin, int af)
+{
+        unsigned long mask = 1 << pin;
+
+        imx_iomuxv1_rmwl(MXC_GPR(port), mask, af ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_gius(
+                unsigned int port, unsigned int pin, int inuse)
+{
+        unsigned long mask = 1 << pin;
+
+        imx_iomuxv1_rmwl(MXC_GIUS(port), mask, inuse ? mask : 0);
+}
+
+static inline void imx_iomuxv1_set_ocr(
+                unsigned int port, unsigned int pin, unsigned int ocr)
+{
+        unsigned long shift = (pin & 0xf) << 1;
+        unsigned long mask = 3 << shift;
+        unsigned long value = ocr << shift;
+        unsigned long offset = pin < 16 ? MXC_OCR1(port) : MXC_OCR2(port);
+
+        imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfa(
+                unsigned int port, unsigned int pin, unsigned int aout)
+{
+        unsigned long shift = (pin & 0xf) << 1;
+        unsigned long mask = 3 << shift;
+        unsigned long value = aout << shift;
+        unsigned long offset = pin < 16 ? MXC_ICONFA1(port) : MXC_ICONFA2(port);
+
+        imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+static inline void imx_iomuxv1_set_iconfb(
+                unsigned int port, unsigned int pin, unsigned int bout)
+{
+        unsigned long shift = (pin & 0xf) << 1;
+        unsigned long mask = 3 << shift;
+        unsigned long value = bout << shift;
+        unsigned long offset = pin < 16 ? MXC_ICONFB1(port) : MXC_ICONFB2(port);
+
+        imx_iomuxv1_rmwl(offset, mask, value);
+}
+
+int mxc_gpio_mode(int gpio_mode)
+{
+        unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+        unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
+        unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
+        unsigned int aout = (gpio_mode >> GPIO_AOUT_SHIFT) & 3;
+        unsigned int bout = (gpio_mode >> GPIO_BOUT_SHIFT) & 3;
+
+        if (port >= imx_iomuxv1_numports)
+                return -EINVAL;
+
+        /* Pullup enable */
+        imx_iomuxv1_set_puen(port, pin, gpio_mode & GPIO_PUEN);
+
+        /* Data direction */
+        imx_iomuxv1_set_ddir(port, pin, gpio_mode & GPIO_OUT);
+
+        /* Primary / alternate function */
+        imx_iomuxv1_set_gpr(port, pin, gpio_mode & GPIO_AF);
+
+        /* use as gpio? */
+        imx_iomuxv1_set_gius(port, pin, !(gpio_mode & (GPIO_PF | GPIO_AF)));
+
+        imx_iomuxv1_set_ocr(port, pin, ocr);
+
+        imx_iomuxv1_set_iconfa(port, pin, aout);
+
+        imx_iomuxv1_set_iconfb(port, pin, bout);
+
+        return 0;
+}
+EXPORT_SYMBOL(mxc_gpio_mode);
+
+static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
+{
+        size_t i;
+        int ret;
+
+        for (i = 0; i < count; ++i) {
+                ret = mxc_gpio_mode(list[i]);
+
+                if (ret)
+                        return ret;
+        }
+
+        return ret;
+}
+
+int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+                const char *label)
+{
+        size_t i;
+        int ret;
+
+        for (i = 0; i < count; ++i) {
+                unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+                ret = gpio_request(gpio, label);
+                if (ret)
+                        goto err_gpio_request;
+        }
+
+        ret = imx_iomuxv1_setup_multiple(pin_list, count);
+        if (ret)
+                goto err_setup;
+
+        return 0;
+
+err_setup:
+        BUG_ON(i != count);
+
+err_gpio_request:
+        mxc_gpio_release_multiple_pins(pin_list, i);
+
+        return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+        size_t i;
+
+        for (i = 0; i < count; ++i) {
+                unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+
+                gpio_free(gpio);
+        }
+}
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
+
+static int imx_iomuxv1_init(void)
+{
+#ifdef CONFIG_ARCH_MX1
+        if (cpu_is_mx1()) {
+                imx_iomuxv1_baseaddr = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR);
+                imx_iomuxv1_numports = MX1_NUM_GPIO_PORT;
+        } else
+#endif
+#ifdef CONFIG_MACH_MX21
+        if (cpu_is_mx21()) {
+                imx_iomuxv1_baseaddr = MX21_IO_ADDRESS(MX21_GPIO_BASE_ADDR);
+                imx_iomuxv1_numports = MX21_NUM_GPIO_PORT;
+        } else
+#endif
+#ifdef CONFIG_MACH_MX27
+        if (cpu_is_mx27()) {
+                imx_iomuxv1_baseaddr = MX27_IO_ADDRESS(MX27_GPIO_BASE_ADDR);
+                imx_iomuxv1_numports = MX27_NUM_GPIO_PORT;
+        } else
+#endif
+                return -ENODEV;
+
+        return 0;
+}
+pure_initcall(imx_iomuxv1_init);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 844567ee35f..c1ce51abdba 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -30,9 +30,15 @@
 #include <asm/mach/time.h>
 #include <mach/common.h>
 
+/*
+ * There are 2 versions of the timer hardware on Freescale MXC hardware.
+ * Version 1: MX1/MXL, MX21, MX27.
+ * Version 2: MX25, MX31, MX35, MX37, MX51
+ */
+
 /* defines common for all i.MX */
 #define MXC_TCTL                0x00
-#define MXC_TCTL_TEN            (1 << 0)
+#define MXC_TCTL_TEN            (1 << 0) /* Enable module */
 #define MXC_TPRER               0x04
 
 /* MX1, MX21, MX27 */
@@ -47,8 +53,8 @@
 #define MX2_TSTAT_CAPT          (1 << 1)
 #define MX2_TSTAT_COMP          (1 << 0)
 
-/* MX31, MX35, MX25, MXC91231 */
-#define MX3_TCTL_WAITEN         (1 << 3)
+/* MX31, MX35, MX25, MXC91231, MX5 */
+#define MX3_TCTL_WAITEN         (1 << 3) /* Wait enable mode */
 #define MX3_TCTL_CLK_IPG        (1 << 6)
 #define MX3_TCTL_FRR            (1 << 9)
 #define MX3_IR                  0x0c
@@ -57,6 +63,9 @@
 #define MX3_TCN                 0x24
 #define MX3_TCMP                0x10
 
+#define timer_is_v1()   (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
+#define timer_is_v2()   (!timer_is_v1())
+
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
 
@@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void)
 {
         unsigned int tmp;
 
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 __raw_writel(0, timer_base + MX3_IR);
         else {
                 tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 __raw_writel(1<<0, timer_base + MX3_IR);
         else {
                 __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void)
 
 static void gpt_irq_acknowledge(void)
 {
-        if (cpu_is_mx1())
-                __raw_writel(0, timer_base + MX1_2_TSTAT);
-        if (cpu_is_mx2())
-                __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v1()) {
+                if (cpu_is_mx1())
+                        __raw_writel(0, timer_base + MX1_2_TSTAT);
+                else
+                        __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
+                                timer_base + MX1_2_TSTAT);
+        } else if (timer_is_v2())
                 __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 clocksource_mxc.read = mx3_get_cycles;
 
         clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
         if (mode != clockevent_mode) {
                 /* Set event time into far-far future */
-                if (cpu_is_mx3() || cpu_is_mx25())
+                if (timer_is_v2())
                         __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
                                         timer_base + MX3_TCMP);
                 else
@@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
         struct clock_event_device *evt = &clockevent_mxc;
         uint32_t tstat;
 
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 tstat = __raw_readl(timer_base + MX3_TSTAT);
         else
                 tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
         unsigned int c = clk_get_rate(timer_clk);
 
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 clockevent_mxc.set_next_event = mx3_set_next_event;
 
         clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
         __raw_writel(0, timer_base + MXC_TCTL);
         __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-        if (cpu_is_mx3() || cpu_is_mx25())
+        if (timer_is_v2())
                 tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
         else
                 tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
new file mode 100644
index 00000000000..afa6709db0b
--- /dev/null
+++ b/arch/arm/plat-mxc/tzic.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+
+/*
+ *****************************************
+ * TZIC Registers                        *
+ *****************************************
+ */
+
+#define TZIC_INTCNTL    0x0000  /* Control register */
+#define TZIC_INTTYPE    0x0004  /* Controller Type register */
+#define TZIC_IMPID      0x0008  /* Distributor Implementer Identification */
+#define TZIC_PRIOMASK   0x000C  /* Priority Mask Reg */
+#define TZIC_SYNCCTRL   0x0010  /* Synchronizer Control register */
+#define TZIC_DSMINT     0x0014  /* DSM interrupt Holdoffregister */
+#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
+#define TZIC_ENSET0(i)  (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
+#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
+#define TZIC_SRCSET0    0x0200  /* Source Set Register 0 */
+#define TZIC_SRCCLAR0   0x0280  /* Source Clear Register 0 */
+#define TZIC_PRIORITY0  0x0400  /* Priority Register 0 */
+#define TZIC_PND0       0x0D00  /* Pending Register 0 */
+#define TZIC_HIPND0     0x0D80  /* High Priority Pending Register */
+#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2))   /* Wakeup Config Register */
+#define TZIC_SWINT      0x0F00  /* Software Interrupt Rigger Register */
+#define TZIC_ID0        0x0FD0  /* Indentification Register 0 */
+
+void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
+
+/**
+ * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_mask_irq(unsigned int irq)
+{
+        int index, off;
+
+        index = irq >> 5;
+        off = irq & 0x1F;
+        __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
+}
+
+/**
+ * tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
+ *
+ * @param  irq          interrupt source number
+ */
+static void tzic_unmask_irq(unsigned int irq)
+{
+        int index, off;
+
+        index = irq >> 5;
+        off = irq & 0x1F;
+        __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
+}
+
+static unsigned int wakeup_intr[4];
+
+/**
+ * tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
+ *
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ *                      disble as wake-up if equal to zero
+ *
+ * @return       This function returns 0 on success.
+ */
+static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
+{
+        unsigned int index, off;
+
+        index = irq >> 5;
+        off = irq & 0x1F;
+
+        if (index > 3)
+                return -EINVAL;
+
+        if (enable)
+                wakeup_intr[index] |= (1 << off);
+        else
+                wakeup_intr[index] &= ~(1 << off);
+
+        return 0;
+}
+
+static struct irq_chip mxc_tzic_chip = {
+        .name = "MXC_TZIC",
+        .ack = tzic_mask_irq,
+        .mask = tzic_mask_irq,
+        .unmask = tzic_unmask_irq,
+        .set_wake = tzic_set_wake_irq,
+};
+
+/*
+ * This function initializes the TZIC hardware and disables all the
+ * interrupts. It registers the interrupt enable and disable functions
+ * to the kernel for each interrupt source.
+ */
+void __init tzic_init_irq(void __iomem *irqbase)
+{
+        int i;
+
+        tzic_base = irqbase;
+        /* put the TZIC into the reset value with
+         * all interrupts disabled
+         */
+        i = __raw_readl(tzic_base + TZIC_INTCNTL);
+
+        __raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
+        __raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
+        __raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
+
+        for (i = 0; i < 4; i++)
+                __raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
+
+        /* disable all interrupts */
+        for (i = 0; i < 4; i++)
+                __raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
+
+        /* all IRQ no FIQ Warning :: No selection */
+
+        for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+                set_irq_chip(i, &mxc_tzic_chip);
+                set_irq_handler(i, handle_level_irq);
+                set_irq_flags(i, IRQF_VALID);
+        }
+
+        pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
+}
+
+/**
+ * tzic_enable_wake() - enable wakeup interrupt
+ *
+ * @param is_idle               1 if called in idle loop (ENSET0 register);
+ *                              0 to be used when called from low power entry
+ * @return                      0 if successful; non-zero otherwise
+ */
+int tzic_enable_wake(int is_idle)
+{
+        unsigned int i, v;
+
+        __raw_writel(1, tzic_base + TZIC_DSMINT);
+        if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
+                return -EAGAIN;
+
+        for (i = 0; i < 4; i++) {
+                v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
+                __raw_writel(v, TZIC_WAKEUP0(i));
+        }
+
+        return 0;
+}
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index 62f18ad43a2..fa7cb3a57cb 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -49,24 +49,17 @@ static struct clocksource nmdk_clksrc = {
 static void nmdk_clkevt_mode(enum clock_event_mode mode,
                              struct clock_event_device *dev)
 {
-        unsigned long flags;
-
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
-                /* enable interrupts -- and count current value? */
-                raw_local_irq_save(flags);
+                /* count current value? */
                 writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
-                raw_local_irq_restore(flags);
                 break;
         case CLOCK_EVT_MODE_ONESHOT:
                 BUG(); /* Not supported, yet */
                 /* FALLTHROUGH */
         case CLOCK_EVT_MODE_SHUTDOWN:
         case CLOCK_EVT_MODE_UNUSED:
-                /* disable irq */
-                raw_local_irq_save(flags);
                 writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
-                raw_local_irq_restore(flags);
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 break;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index d9f8c844c38..4becbdd1935 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -391,7 +391,7 @@ static struct dentry *clk_debugfs_root;
 static int clk_debugfs_register_one(struct clk *c)
 {
         int err;
-        struct dentry *d, *child;
+        struct dentry *d, *child, *child_tmp;
         struct clk *pa = c->parent;
         char s[255];
         char *p = s;
@@ -423,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c)
 
 err_out:
         d = c->dent;
-        list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+        list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
                 debugfs_remove(child);
         debugfs_remove(c->dent);
         return err;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index bf1eaf3a27d..dddc0273bc8 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -172,6 +172,32 @@ unsigned long long sched_clock(void)
                                   clocksource_32k.mult, clocksource_32k.shift);
 }
 
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+        unsigned long long nsecs;
+        cycles_t delta;
+        struct timespec *tsp = &persistent_ts;
+
+        last_cycles = cycles;
+        cycles = clocksource_32k.read(&clocksource_32k);
+        delta = cycles - last_cycles;
+
+        nsecs = clocksource_cyc2ns(delta,
+                                   clocksource_32k.mult, clocksource_32k.shift);
+
+        timespec_add_ns(tsp, nsecs);
+        *ts = *tsp;
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
         static char err[] __initdata = KERN_ERR
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 09d82b3c66c..728c6420418 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1183,7 +1183,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
         }
 
         if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-            (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+            (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
                 printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
                        "before unlinking\n");
                 dump_stack();
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 64f407ee0f4..08ccf892252 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -551,6 +551,19 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
         if (l & OMAP_TIMER_CTRL_ST) {
                 l &= ~0x1;
                 omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+                        defined(CONFIG_ARCH_OMAP4)
+                /* Readback to make sure write has completed */
+                omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+                 /*
+                  * Wait for functional clock period x 3.5 to make sure that
+                  * timer is stopped
+                  */
+                udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+                /* Ack possibly pending interrupt */
+                omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+                                OMAP_TIMER_INT_OVERFLOW);
+#endif
         }
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d17620c50c2..d2422c766cc 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 /*
  * This only applies to chips that can't do both rising and falling edge
  * detection at once.  For all other chips, this function is a noop.
@@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
         u32 l = 0;
 
         switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
         case METHOD_MPUIO:
                 reg += OMAP_MPUIO_GPIO_INT_EDGE;
                 break;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
         case METHOD_GPIO_1510:
                 reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
         __raw_writel(l, reg);
 }
+#endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 9a028bdebb0..a162f585b1e 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -434,6 +434,7 @@ IS_OMAP_TYPE(3517, 0x3517)
 #define OMAP3430_REV_ES2_1      0x34302034
 #define OMAP3430_REV_ES3_0      0x34303034
 #define OMAP3430_REV_ES3_1      0x34304034
+#define OMAP3430_REV_ES3_1_2    0x34305034
 
 #define OMAP3630_REV_ES1_0      0x36300034
 
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 97d6c50c3dc..c0ab7c80f72 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -499,6 +499,9 @@ extern void omap_init_irq(void);
 extern int omap_irq_pending(void);
 void omap_intc_save_context(void);
 void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 007935a921e..33933256a22 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -227,6 +227,7 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_SIDLEMODE      (1 << 5)
 #define SYSC_HAS_MIDLEMODE      (1 << 6)
 #define SYSS_MISSING            (1 << 7)
+#define SYSC_NO_CACHE           (1 << 8)  /* XXX SW flag, belongs elsewhere */
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH      0x0
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 1e5648d3e3d..2ed72013c2e 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -89,16 +89,6 @@
 #define USE_WAKEUP_LAT                  0
 #define IGNORE_WAKEUP_LAT               1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE             0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE             0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE             0x48320000
-#else
-# error Unknown OMAP device
-#endif
 
 /* Private functions */
 
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d78ad..54c84a492a0 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
         }
 
         /*
+         * Round up 'size' to the nearest power of two.
+         */
+        if ((size & (size - 1)) != 0)
+                size = 1 << fls(size);
+
+        /*
          * Setup BAR[1] to all DRAM banks.
          */
         writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c3a74ce24ef..31c2f4c30a9 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Sat Feb 20 14:16:15 2010
 #
 # machine_is_xxx        CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -2257,7 +2257,7 @@ oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi              MACH_ORATISMADI         ORATISMADI              2269
 oratisot16              MACH_ORATISOT16         ORATISOT16              2270
 oratisdesk              MACH_ORATISDESK         ORATISDESK              2271
-v2_ca9                  MACH_V2P_CA9            V2P_CA9                 2272
+vexpress                MACH_VEXPRESS           VEXPRESS                2272
 sintexo                 MACH_SINTEXO            SINTEXO                 2273
 cm3389                  MACH_CM3389             CM3389                  2274
 omap3_cio               MACH_OMAP3_CIO          OMAP3_CIO               2275
@@ -2536,6 +2536,7 @@ davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 c3ax03                  MACH_C3AX03             C3AX03                  2549
 mxt_td60                MACH_MXT_TD60           MXT_TD60                2550
 esyx                    MACH_ESYX               ESYX                    2551
+dove_db2                MACH_DOVE_DB2           DOVE_DB2                2552
 bulldog                 MACH_BULLDOG            BULLDOG                 2553
 derell_me2000           MACH_DERELL_ME2000      DERELL_ME2000           2554
 bcmring_base            MACH_BCMRING_BASE       BCMRING_BASE            2555
@@ -2555,6 +2556,7 @@ iseo			MACH_ISEO		ISEO			2568
 cezanne                 MACH_CEZANNE            CEZANNE                 2569
 lucca                   MACH_LUCCA              LUCCA                   2570
 supersmart              MACH_SUPERSMART         SUPERSMART              2571
+arm11_board             MACH_CS_MISANO          CS_MISANO               2572
 magnolia2               MACH_MAGNOLIA2          MAGNOLIA2               2573
 emxx                    MACH_EMXX               EMXX                    2574
 outlaw                  MACH_OUTLAW             OUTLAW                  2575
@@ -2578,3 +2580,101 @@ glacier			MACH_GLACIER		GLACIER			2592
 phrazer_bulldog         MACH_PHRAZER_BULLDOG    PHRAZER_BULLDOG         2593
 omap3_bulldog           MACH_OMAP3_BULLDOG      OMAP3_BULLDOG           2594
 pca101                  MACH_PCA101             PCA101                  2595
+buzzc                   MACH_BUZZC              BUZZC                   2596
+sasie2                  MACH_SASIE2             SASIE2                  2597
+davinci_cio             MACH_DAVINCI_CIO        DAVINCI_CIO             2598
+smartmeter_dl           MACH_SMARTMETER_DL      SMARTMETER_DL           2599
+wzl6410                 MACH_WZL6410            WZL6410                 2600
+wzl6410m                MACH_WZL6410M           WZL6410M                2601
+wzl6410f                MACH_WZL6410F           WZL6410F                2602
+wzl6410i                MACH_WZL6410I           WZL6410I                2603
+spacecom1               MACH_SPACECOM1          SPACECOM1               2604
+pingu920                MACH_PINGU920           PINGU920                2605
+bravoc                  MACH_BRAVOC             BRAVOC                  2606
+cybo2440                MACH_CYBO2440           CYBO2440                2607
+vdssw                   MACH_VDSSW              VDSSW                   2608
+romulus                 MACH_ROMULUS            ROMULUS                 2609
+omap_magic              MACH_OMAP_MAGIC         OMAP_MAGIC              2610
+eltd100                 MACH_ELTD100            ELTD100                 2611
+capc7117                MACH_CAPC7117           CAPC7117                2612
+swan                    MACH_SWAN               SWAN                    2613
+veu                     MACH_VEU                VEU                     2614
+rm2                     MACH_RM2                RM2                     2615
+tt2100                  MACH_TT2100             TT2100                  2616
+venice                  MACH_VENICE             VENICE                  2617
+pc7323                  MACH_PC7323             PC7323                  2618
+masp                    MACH_MASP               MASP                    2619
+fujitsu_tvstbsoc0       MACH_FUJITSU_TVSTBSOC   FUJITSU_TVSTBSOC        2620
+fujitsu_tvstbsoc1       MACH_FUJITSU_TVSTBSOC1  FUJITSU_TVSTBSOC1       2621
+lexikon                 MACH_LEXIKON            LEXIKON                 2622
+mini2440v2              MACH_MINI2440V2         MINI2440V2              2623
+icontrol                MACH_ICONTROL           ICONTROL                2624
+sheevad                 MACH_SHEEVAD            SHEEVAD                 2625
+qsd8x50a_st1_1          MACH_QSD8X50A_ST1_1     QSD8X50A_ST1_1          2626
+qsd8x50a_st1_5          MACH_QSD8X50A_ST1_5     QSD8X50A_ST1_5          2627
+bee                     MACH_BEE                BEE                     2628
+mx23evk                 MACH_MX23EVK            MX23EVK                 2629
+ap4evb                  MACH_AP4EVB             AP4EVB                  2630
+stockholm               MACH_STOCKHOLM          STOCKHOLM               2631
+lpc_h3131               MACH_LPC_H3131          LPC_H3131               2632
+stingray                MACH_STINGRAY           STINGRAY                2633
+kraken                  MACH_KRAKEN             KRAKEN                  2634
+gw2388                  MACH_GW2388             GW2388                  2635
+jadecpu                 MACH_JADECPU            JADECPU                 2636
+carlisle                MACH_CARLISLE           CARLISLE                2637
+lux_sf9                 MACH_LUX_SFT9           LUX_SFT9                2638
+nemid_tb                MACH_NEMID_TB           NEMID_TB                2639
+terrier                 MACH_TERRIER            TERRIER                 2640
+turbot                  MACH_TURBOT             TURBOT                  2641
+sanddab                 MACH_SANDDAB            SANDDAB                 2642
+mx35_cicada             MACH_MX35_CICADA        MX35_CICADA             2643
+ghi2703d                MACH_GHI2703D           GHI2703D                2644
+lux_sfx9                MACH_LUX_SFX9           LUX_SFX9                2645
+lux_sf9g                MACH_LUX_SF9G           LUX_SF9G                2646
+lux_edk9                MACH_LUX_EDK9           LUX_EDK9                2647
+hw90240                 MACH_HW90240            HW90240                 2648
+dm365_leopard           MACH_DM365_LEOPARD      DM365_LEOPARD           2649
+mityomapl138            MACH_MITYOMAPL138       MITYOMAPL138            2650
+scat110                 MACH_SCAT110            SCAT110                 2651
+acer_a1                 MACH_ACER_A1            ACER_A1                 2652
+cmcontrol               MACH_CMCONTROL          CMCONTROL               2653
+pelco_lamar             MACH_PELCO_LAMAR        PELCO_LAMAR             2654
+rfp43                   MACH_RFP43              RFP43                   2655
+sk86r0301               MACH_SK86R0301          SK86R0301               2656
+ctpxa                   MACH_CTPXA              CTPXA                   2657
+epb_arm9_a              MACH_EPB_ARM9_A         EPB_ARM9_A              2658
+guruplug                MACH_GURUPLUG           GURUPLUG                2659
+spear310                MACH_SPEAR310           SPEAR310                2660
+spear320                MACH_SPEAR320           SPEAR320                2661
+robotx                  MACH_ROBOTX             ROBOTX                  2662
+lsxhl                   MACH_LSXHL              LSXHL                   2663
+smartlite               MACH_SMARTLITE          SMARTLITE               2664
+cws2                    MACH_CWS2               CWS2                    2665
+m619                    MACH_M619               M619                    2666
+smartview               MACH_SMARTVIEW          SMARTVIEW               2667
+lsa_salsa               MACH_LSA_SALSA          LSA_SALSA               2668
+kizbox                  MACH_KIZBOX             KIZBOX                  2669
+htccharmer              MACH_HTCCHARMER         HTCCHARMER              2670
+guf_neso_lt             MACH_GUF_NESO_LT        GUF_NESO_LT             2671
+pm9g45                  MACH_PM9G45             PM9G45                  2672
+htcpanther              MACH_HTCPANTHER         HTCPANTHER              2673
+htcpanther_cdma         MACH_HTCPANTHER_CDMA    HTCPANTHER_CDMA         2674
+reb01                   MACH_REB01              REB01                   2675
+aquila                  MACH_AQUILA             AQUILA                  2676
+spark_sls_hw2           MACH_SPARK_SLS_HW2      SPARK_SLS_HW2           2677
+sheeva_esata            MACH_ESATA_SHEEVAPLUG   ESATA_SHEEVAPLUG        2678
+surf7x30                MACH_SURF7X30           SURF7X30                2679
+micro2440               MACH_MICRO2440          MICRO2440               2680
+am2440                  MACH_AM2440             AM2440                  2681
+tq2440                  MACH_TQ2440             TQ2440                  2682
+lpc2478oem              MACH_LPC2478OEM         LPC2478OEM              2683
+ak880x                  MACH_AK880X             AK880X                  2684
+cobra3530               MACH_COBRA3530          COBRA3530               2685
+pmppb                   MACH_PMPPB              PMPPB                   2686
+u6715                   MACH_U6715              U6715                   2687
+axar1500_sender         MACH_AXAR1500_SENDER    AXAR1500_SENDER         2688
+g30_dvb                 MACH_G30_DVB            G30_DVB                 2689
+vc088x                  MACH_VC088X             VC088X                  2690
+mioa702                 MACH_MIOA702            MIOA702                 2691
+hpmin                   MACH_HPMIN              HPMIN                   2692
+ak880xak                MACH_AK880XAK           AK880XAK                2693
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a5400a25..a63c4be99b3 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
         }
 
         /*
-         * Update the FPSCR with the additional exception flags.
+         * If any of the status flags are set, update the FPSCR.
          * Comparison instructions always return at least one of
          * these flags set.
          */
+        if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+                fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
         fpscr |= exceptions;
 
         fmxr(FPSCR, fpscr);