1 files changed, 139 insertions, 2 deletions

diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index bff7ddd06a5..29c163d300d 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -18,6 +18,9 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -42,6 +45,8 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
+#include <net/ax88796.h>
+
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
@@ -153,6 +158,29 @@ static struct mtd_partition anubis_default_nand_part[] = {
         }
 };
 
+static struct mtd_partition anubis_default_nand_part_large[] = {
+        [0] = {
+                .name   = "Boot Agent",
+                .size   = SZ_128K,
+                .offset = 0,
+        },
+        [1] = {
+                .name   = "/boot",
+                .size   = SZ_4M - SZ_128K,
+                .offset = SZ_128K,
+        },
+        [2] = {
+                .name   = "user1",
+                .offset = SZ_4M,
+                .size   = SZ_32M - SZ_4M,
+        },
+        [3] = {
+                .name   = "user2",
+                .offset = SZ_32M,
+                .size   = MTDPART_SIZ_FULL,
+        }
+};
+
 /* the Anubis has 3 selectable slots for nand-flash, the two
  * on-board chip areas, as well as the external slot.
  *
@@ -260,6 +288,104 @@ static struct platform_device anubis_device_ide1 = {
         .resource       = anubis_ide1_resource,
 };
 
+/* Asix AX88796 10/100 ethernet controller */
+
+static struct ax_plat_data anubis_asix_platdata = {
+        .flags          = AXFLG_MAC_FROMDEV,
+        .wordlength     = 2,
+        .dcr_val        = 0x48,
+        .rcr_val        = 0x40,
+};
+
+static struct resource anubis_asix_resource[] = {
+        [0] = {
+                .start = S3C2410_CS5,
+                .end   = S3C2410_CS5 + (0x20 * 0x20) -1,
+                .flags = IORESOURCE_MEM
+        },
+        [1] = {
+                .start = IRQ_ASIX,
+                .end   = IRQ_ASIX,
+                .flags = IORESOURCE_IRQ
+        }
+};
+
+static struct platform_device anubis_device_asix = {
+        .name           = "ax88796",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(anubis_asix_resource),
+        .resource       = anubis_asix_resource,
+        .dev            = {
+                .platform_data = &anubis_asix_platdata,
+        }
+};
+
+/* SM501 */
+
+static struct resource anubis_sm501_resource[] = {
+        [0] = {
+                .start  = S3C2410_CS2,
+                .end    = S3C2410_CS2 + SZ_8M,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = S3C2410_CS2 + SZ_64M - SZ_2M,
+                .end    = S3C2410_CS2 + SZ_64M - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [2] = {
+                .start  = IRQ_EINT0,
+                .end    = IRQ_EINT0,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct sm501_initdata anubis_sm501_initdata = {
+        .gpio_high      = {
+                .set    = 0x3F000000,           /* 24bit panel */
+                .mask   = 0x0,
+        },
+        .misc_timing    = {
+                .set    = 0x010100,             /* SDRAM timing */
+                .mask   = 0x1F1F00,
+        },
+        .misc_control   = {
+                .set    = SM501_MISC_PNL_24BIT,
+                .mask   = 0,
+        },
+
+        /* set the SDRAM and bus clocks */
+        .mclk           = 72 * MHZ,
+        .m1xclk         = 144 * MHZ,
+};
+
+static struct sm501_platdata_gpio_i2c anubis_sm501_gpio_i2c[] = {
+        [0] = {
+                .pin_scl        = 44,
+                .pin_sda        = 45,
+        },
+        [1] = {
+                .pin_scl        = 40,
+                .pin_sda        = 41,
+        },
+};
+
+static struct sm501_platdata anubis_sm501_platdata = {
+        .init           = &anubis_sm501_initdata,
+        .gpio_i2c       = anubis_sm501_gpio_i2c,
+        .gpio_i2c_nr    = ARRAY_SIZE(anubis_sm501_gpio_i2c),
+};
+
+static struct platform_device anubis_device_sm501 = {
+        .name           = "sm501",
+        .id             = 0,
+        .num_resources  = ARRAY_SIZE(anubis_sm501_resource),
+        .resource       = anubis_sm501_resource,
+        .dev            = {
+                .platform_data = &anubis_sm501_platdata,
+        },
+};
+
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
@@ -271,6 +397,8 @@ static struct platform_device *anubis_devices[] __initdata = {
         &s3c_device_nand,
         &anubis_device_ide0,
         &anubis_device_ide1,
+        &anubis_device_asix,
+        &anubis_device_sm501,
 };
 
 static struct clk *anubis_clocks[] = {
@@ -304,8 +432,17 @@ static void __init anubis_map_io(void)
         s3c24xx_init_clocks(0);
         s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 
-        /* ensure that the GPIO is setup */
-        s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+        /* check for the newer revision boards with large page nand */
+
+        if ((__raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK) >= 4) {
+                printk(KERN_INFO "ANUBIS-B detected (revision %d)\n",
+                       __raw_readb(ANUBIS_VA_IDREG) & ANUBIS_IDREG_REVMASK);
+                anubis_nand_sets[0].partitions = anubis_default_nand_part_large;
+                anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
+        } else {
+                /* ensure that the GPIO is setup */
+                s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+        }
 }
 
 static void __init anubis_init(void)