5 files changed, 104 insertions, 85 deletions

diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi
index e8ffc70ffe1..4f9ba3c2fca 100644
--- a/Documentation/ABI/testing/sysfs-firmware-acpi
+++ b/Documentation/ABI/testing/sysfs-firmware-acpi
@@ -69,9 +69,13 @@ Description:
                 gpe1F:       0  invalid
                 gpe_all:    1192
                 sci:    1194
+                sci_not:     0  
 
-                sci - The total number of times the ACPI SCI
-                has claimed an interrupt.
+                sci - The number of times the ACPI SCI
+                has been called and claimed an interrupt.
+
+                sci_not - The number of times the ACPI SCI
+                has been called and NOT claimed an interrupt.
 
                 gpe_all - count of SCI caused by GPEs.
 
diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt
index c78a49b7bba..748a1ae49e1 100644
--- a/Documentation/filesystems/caching/cachefiles.txt
+++ b/Documentation/filesystems/caching/cachefiles.txt
@@ -407,7 +407,7 @@ A NOTE ON SECURITY
 ==================
 
 CacheFiles makes use of the split security in the task_struct.  It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
 when it acts on behalf of another process, in that process's context.
 
 The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
 the process looks like in /proc.
 
 So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as).  The
-objective security holds the intrinsic security properties of a process and is
-never overridden.  This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden.  This is what appears in /proc, and is what is used when a
 process is the target of an operation by some other process (SIGKILL for
 example).
 
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 3d7650768bb..e7e9a69069e 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -1,7 +1,7 @@
                      ThinkPad ACPI Extras Driver
 
-                            Version 0.22
-                        November 23rd,  2008
+                            Version 0.23
+                          April 10th, 2009
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 0ab0230cbcb..d16b7a1c379 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -43,12 +43,11 @@ Table of Contents
     2) Representing devices without a current OF specification
       a) PHY nodes
       b) Interrupt controllers
-      c) CFI or JEDEC memory-mapped NOR flash
-      d) 4xx/Axon EMAC ethernet nodes
-      e) Xilinx IP cores
-      f) USB EHCI controllers
-      g) MDIO on GPIOs
-      h) SPI busses
+      c) 4xx/Axon EMAC ethernet nodes
+      d) Xilinx IP cores
+      e) USB EHCI controllers
+      f) MDIO on GPIOs
+      g) SPI busses
 
   VII - Marvell Discovery mv64[345]6x System Controller chips
     1) The /system-controller node
@@ -999,7 +998,7 @@ compatibility.
       translation of SOC addresses for memory mapped SOC registers.
     - bus-frequency: Contains the bus frequency for the SOC node.
       Typically, the value of this field is filled in by the boot
-      loader. 
+      loader.
 
 
   Recommended properties:
@@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
                 device_type = "open-pic";
         };
 
-   c) CFI or JEDEC memory-mapped NOR flash
-
-    Flash chips (Memory Technology Devices) are often used for solid state
-    file systems on embedded devices.
-
-     - compatible : should contain the specific model of flash chip(s)
-       used, if known, followed by either "cfi-flash" or "jedec-flash"
-     - reg : Address range of the flash chip
-     - bank-width : Width (in bytes) of the flash bank.  Equal to the
-       device width times the number of interleaved chips.
-     - device-width : (optional) Width of a single flash chip.  If
-       omitted, assumed to be equal to 'bank-width'.
-     - #address-cells, #size-cells : Must be present if the flash has
-       sub-nodes representing partitions (see below).  In this case
-       both #address-cells and #size-cells must be equal to 1.
-
-    For JEDEC compatible devices, the following additional properties
-    are defined:
-
-     - vendor-id : Contains the flash chip's vendor id (1 byte).
-     - device-id : Contains the flash chip's device id (1 byte).
-
-    In addition to the information on the flash bank itself, the
-    device tree may optionally contain additional information
-    describing partitions of the flash address space.  This can be
-    used on platforms which have strong conventions about which
-    portions of the flash are used for what purposes, but which don't
-    use an on-flash partition table such as RedBoot.
-
-    Each partition is represented as a sub-node of the flash device.
-    Each node's name represents the name of the corresponding
-    partition of the flash device.
-
-    Flash partitions
-     - reg : The partition's offset and size within the flash bank.
-     - label : (optional) The label / name for this flash partition.
-       If omitted, the label is taken from the node name (excluding
-       the unit address).
-     - read-only : (optional) This parameter, if present, is a hint to
-       Linux that this flash partition should only be mounted
-       read-only.  This is usually used for flash partitions
-       containing early-boot firmware images or data which should not
-       be clobbered.
-
-    Example:
-
-        flash@ff000000 {
-                compatible = "amd,am29lv128ml", "cfi-flash";
-                reg = <ff000000 01000000>;
-                bank-width = <4>;
-                device-width = <1>;
-                #address-cells = <1>;
-                #size-cells = <1>;
-                fs@0 {
-                        label = "fs";
-                        reg = <0 f80000>;
-                };
-                firmware@f80000 {
-                        label ="firmware";
-                        reg = <f80000 80000>;
-                        read-only;
-                };
-        };
-
-    d) 4xx/Axon EMAC ethernet nodes
+    c) 4xx/Axon EMAC ethernet nodes
 
     The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
     the Axon bridge.  To operate this needs to interact with a ths
@@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
                            available.
                            For Axon: 0x0000012a
 
-   e) Xilinx IP cores
+   d) Xilinx IP cores
 
    The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
    in Xilinx Spartan and Virtex FPGAs.  The devices cover the whole range
@@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model.
       listed above, nodes for these devices should include a phy-handle
       property, and may include other common network device properties
       like local-mac-address.
-      
+
       iv) Xilinx Uartlite
 
       Xilinx uartlite devices are simple fixed speed serial ports.
@@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
        - reg-offset : A value of 3 is required
        - reg-shift : A value of 2 is required
 
-    f) USB EHCI controllers
+    e) USB EHCI controllers
 
     Required properties:
       - compatible : should be "usb-ehci".
@@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
                    big-endian;
            };
 
-   g) MDIO on GPIOs
+   f) MDIO on GPIOs
 
    Currently defined compatibles:
    - virtual,gpio-mdio
@@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
                          &qe_pio_c 6>;
         };
 
-    h) SPI (Serial Peripheral Interface) busses
+    g) SPI (Serial Peripheral Interface) busses
 
     SPI busses can be described with a node for the SPI master device
     and a set of child nodes for each SPI slave on the bus.  For this
diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
new file mode 100644
index 00000000000..667c9bde869
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt
@@ -0,0 +1,80 @@
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+   used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+   It's possible to (optionally) define multiple "reg" tuples so that
+   non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank.  Equal to the
+   device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip.  If
+   omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+   sub-nodes representing partitions (see below).  In this case
+   both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space.  This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+   If omitted, the label is taken from the node name (excluding
+   the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+   Linux that this flash partition should only be mounted
+   read-only.  This is usually used for flash partitions
+   containing early-boot firmware images or data which should not
+   be clobbered.
+
+Example:
+
+        flash@ff000000 {
+                compatible = "amd,am29lv128ml", "cfi-flash";
+                reg = <ff000000 01000000>;
+                bank-width = <4>;
+                device-width = <1>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+                fs@0 {
+                        label = "fs";
+                        reg = <0 f80000>;
+                };
+                firmware@f80000 {
+                        label ="firmware";
+                        reg = <f80000 80000>;
+                        read-only;
+                };
+        };
+
+Here an example with multiple "reg" tuples:
+
+        flash@f0000000,0 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "intel,PC48F4400P0VB", "cfi-flash";
+                reg = <0 0x00000000 0x02000000
+                       0 0x02000000 0x02000000>;
+                bank-width = <2>;
+                partition@0 {
+                        label = "test-part1";
+                        reg = <0 0x04000000>;
+                };
+        };