diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/asm-ppc/dbdma.h |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'include/asm-ppc/dbdma.h')
-rw-r--r-- | include/asm-ppc/dbdma.h | 102 |
1 files changed, 102 insertions, 0 deletions
diff --git a/include/asm-ppc/dbdma.h b/include/asm-ppc/dbdma.h new file mode 100644 index 00000000000..6047f288c70 --- /dev/null +++ b/include/asm-ppc/dbdma.h | |||
@@ -0,0 +1,102 @@ | |||
1 | /* | ||
2 | * Definitions for using the Apple Descriptor-Based DMA controller | ||
3 | * in Power Macintosh computers. | ||
4 | * | ||
5 | * Copyright (C) 1996 Paul Mackerras. | ||
6 | */ | ||
7 | |||
8 | #ifdef __KERNEL__ | ||
9 | #ifndef _ASM_DBDMA_H_ | ||
10 | #define _ASM_DBDMA_H_ | ||
11 | /* | ||
12 | * DBDMA control/status registers. All little-endian. | ||
13 | */ | ||
14 | struct dbdma_regs { | ||
15 | unsigned int control; /* lets you change bits in status */ | ||
16 | unsigned int status; /* DMA and device status bits (see below) */ | ||
17 | unsigned int cmdptr_hi; /* upper 32 bits of command address */ | ||
18 | unsigned int cmdptr; /* (lower 32 bits of) command address (phys) */ | ||
19 | unsigned int intr_sel; /* select interrupt condition bit */ | ||
20 | unsigned int br_sel; /* select branch condition bit */ | ||
21 | unsigned int wait_sel; /* select wait condition bit */ | ||
22 | unsigned int xfer_mode; | ||
23 | unsigned int data2ptr_hi; | ||
24 | unsigned int data2ptr; | ||
25 | unsigned int res1; | ||
26 | unsigned int address_hi; | ||
27 | unsigned int br_addr_hi; | ||
28 | unsigned int res2[3]; | ||
29 | }; | ||
30 | |||
31 | /* Bits in control and status registers */ | ||
32 | #define RUN 0x8000 | ||
33 | #define PAUSE 0x4000 | ||
34 | #define FLUSH 0x2000 | ||
35 | #define WAKE 0x1000 | ||
36 | #define DEAD 0x0800 | ||
37 | #define ACTIVE 0x0400 | ||
38 | #define BT 0x0100 | ||
39 | #define DEVSTAT 0x00ff | ||
40 | |||
41 | /* | ||
42 | * DBDMA command structure. These fields are all little-endian! | ||
43 | */ | ||
44 | struct dbdma_cmd { | ||
45 | unsigned short req_count; /* requested byte transfer count */ | ||
46 | unsigned short command; /* command word (has bit-fields) */ | ||
47 | unsigned int phy_addr; /* physical data address */ | ||
48 | unsigned int cmd_dep; /* command-dependent field */ | ||
49 | unsigned short res_count; /* residual count after completion */ | ||
50 | unsigned short xfer_status; /* transfer status */ | ||
51 | }; | ||
52 | |||
53 | /* DBDMA command values in command field */ | ||
54 | #define OUTPUT_MORE 0 /* transfer memory data to stream */ | ||
55 | #define OUTPUT_LAST 0x1000 /* ditto followed by end marker */ | ||
56 | #define INPUT_MORE 0x2000 /* transfer stream data to memory */ | ||
57 | #define INPUT_LAST 0x3000 /* ditto, expect end marker */ | ||
58 | #define STORE_WORD 0x4000 /* write word (4 bytes) to device reg */ | ||
59 | #define LOAD_WORD 0x5000 /* read word (4 bytes) from device reg */ | ||
60 | #define DBDMA_NOP 0x6000 /* do nothing */ | ||
61 | #define DBDMA_STOP 0x7000 /* suspend processing */ | ||
62 | |||
63 | /* Key values in command field */ | ||
64 | #define KEY_STREAM0 0 /* usual data stream */ | ||
65 | #define KEY_STREAM1 0x100 /* control/status stream */ | ||
66 | #define KEY_STREAM2 0x200 /* device-dependent stream */ | ||
67 | #define KEY_STREAM3 0x300 /* device-dependent stream */ | ||
68 | #define KEY_REGS 0x500 /* device register space */ | ||
69 | #define KEY_SYSTEM 0x600 /* system memory-mapped space */ | ||
70 | #define KEY_DEVICE 0x700 /* device memory-mapped space */ | ||
71 | |||
72 | /* Interrupt control values in command field */ | ||
73 | #define INTR_NEVER 0 /* don't interrupt */ | ||
74 | #define INTR_IFSET 0x10 /* intr if condition bit is 1 */ | ||
75 | #define INTR_IFCLR 0x20 /* intr if condition bit is 0 */ | ||
76 | #define INTR_ALWAYS 0x30 /* always interrupt */ | ||
77 | |||
78 | /* Branch control values in command field */ | ||
79 | #define BR_NEVER 0 /* don't branch */ | ||
80 | #define BR_IFSET 0x4 /* branch if condition bit is 1 */ | ||
81 | #define BR_IFCLR 0x8 /* branch if condition bit is 0 */ | ||
82 | #define BR_ALWAYS 0xc /* always branch */ | ||
83 | |||
84 | /* Wait control values in command field */ | ||
85 | #define WAIT_NEVER 0 /* don't wait */ | ||
86 | #define WAIT_IFSET 1 /* wait if condition bit is 1 */ | ||
87 | #define WAIT_IFCLR 2 /* wait if condition bit is 0 */ | ||
88 | #define WAIT_ALWAYS 3 /* always wait */ | ||
89 | |||
90 | /* Align an address for a DBDMA command structure */ | ||
91 | #define DBDMA_ALIGN(x) (((unsigned)(x) + sizeof(struct dbdma_cmd) - 1) \ | ||
92 | & -sizeof(struct dbdma_cmd)) | ||
93 | |||
94 | /* Useful macros */ | ||
95 | #define DBDMA_DO_STOP(regs) do { \ | ||
96 | out_le32(&((regs)->control), (RUN|FLUSH)<<16); \ | ||
97 | while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH)) \ | ||
98 | ; \ | ||
99 | } while(0) | ||
100 | |||
101 | #endif /* _ASM_DBDMA_H_ */ | ||
102 | #endif /* __KERNEL__ */ | ||