hwmon: (w83781d) Clean up detect function

As kind is now hard-coded to -1, there is room for code clean-ups.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

1 files changed, 53 insertions, 78 deletions

diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index d27ed1bac00..7ab7967da0a 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1054,11 +1054,11 @@ static int
 w83781d_detect(struct i2c_client *client, int kind,
                struct i2c_board_info *info)
 {
-        int val1 = 0, val2;
+        int val1, val2;
         struct w83781d_data *isa = w83781d_data_if_isa();
         struct i2c_adapter *adapter = client->adapter;
         int address = client->addr;
-        const char *client_name = "";
+        const char *client_name;
         enum vendor { winbond, asus } vendid;
 
         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -1070,98 +1070,73 @@ w83781d_detect(struct i2c_client *client, int kind,
         if (isa)
                 mutex_lock(&isa->update_lock);
 
-        /* The w8378?d may be stuck in some other bank than bank 0. This may
-           make reading other information impossible. Specify a force=... or
-           force_*=... parameter, and the Winbond will be reset to the right
-           bank. */
-        if (kind < 0) {
-                if (i2c_smbus_read_byte_data
-                    (client, W83781D_REG_CONFIG) & 0x80) {
-                        dev_dbg(&adapter->dev, "Detection of w83781d chip "
-                                "failed at step 3\n");
-                        goto err_nodev;
-                }
-                val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
-                val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-                /* Check for Winbond or Asus ID if in bank 0 */
-                if ((!(val1 & 0x07)) &&
-                    (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
-                     || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
-                        dev_dbg(&adapter->dev, "Detection of w83781d chip "
-                                "failed at step 4\n");
+        if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) {
+                dev_dbg(&adapter->dev,
+                        "Detection of w83781d chip failed at step 3\n");
+                goto err_nodev;
+        }
+
+        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK);
+        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+        /* Check for Winbond or Asus ID if in bank 0 */
+        if (!(val1 & 0x07) &&
+            ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) ||
+             ( (val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) {
+                dev_dbg(&adapter->dev,
+                        "Detection of w83781d chip failed at step 4\n");
+                goto err_nodev;
+        }
+        /* If Winbond SMBus, check address at 0x48.
+           Asus doesn't support, except for as99127f rev.2 */
+        if ((!(val1 & 0x80) && val2 == 0xa3) ||
+            ( (val1 & 0x80) && val2 == 0x5c)) {
+                if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR)
+                    != address) {
+                        dev_dbg(&adapter->dev,
+                                "Detection of w83781d chip failed at step 5\n");
                         goto err_nodev;
                 }
-                /* If Winbond SMBus, check address at 0x48.
-                   Asus doesn't support, except for as99127f rev.2 */
-                if ((!(val1 & 0x80) && (val2 == 0xa3)) ||
-                    ((val1 & 0x80) && (val2 == 0x5c))) {
-                        if (i2c_smbus_read_byte_data
-                            (client, W83781D_REG_I2C_ADDR) != address) {
-                                dev_dbg(&adapter->dev, "Detection of w83781d "
-                                        "chip failed at step 5\n");
-                                goto err_nodev;
-                        }
-                }
         }
 
-        /* We have either had a force parameter, or we have already detected the
-           Winbond. Put it now into bank 0 and Vendor ID High Byte */
+        /* Put it now into bank 0 and Vendor ID High Byte */
         i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
                 (i2c_smbus_read_byte_data(client, W83781D_REG_BANK)
                  & 0x78) | 0x80);
 
-        /* Determine the chip type. */
-        if (kind <= 0) {
-                /* get vendor ID */
-                val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
-                if (val2 == 0x5c)
-                        vendid = winbond;
-                else if (val2 == 0x12)
-                        vendid = asus;
-                else {
-                        dev_dbg(&adapter->dev, "w83781d chip vendor is "
-                                "neither Winbond nor Asus\n");
-                        goto err_nodev;
-                }
-
-                val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
-                if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
-                        kind = w83781d;
-                else if (val1 == 0x30 && vendid == winbond)
-                        kind = w83782d;
-                else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
-                        kind = w83783s;
-                else if (val1 == 0x31)
-                        kind = as99127f;
-                else {
-                        if (kind == 0)
-                                dev_warn(&adapter->dev, "Ignoring 'force' "
-                                         "parameter for unknown chip at "
-                                         "address 0x%02x\n", address);
-                        goto err_nodev;
-                }
-
-                if ((kind == w83781d || kind == w83782d)
-                 && w83781d_alias_detect(client, val1)) {
-                        dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
-                                "be the same as ISA device\n", address);
-                        goto err_nodev;
-                }
+        /* Get the vendor ID */
+        val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN);
+        if (val2 == 0x5c)
+                vendid = winbond;
+        else if (val2 == 0x12)
+                vendid = asus;
+        else {
+                dev_dbg(&adapter->dev,
+                        "w83781d chip vendor is neither Winbond nor Asus\n");
+                goto err_nodev;
         }
 
-        if (isa)
-                mutex_unlock(&isa->update_lock);
-
-        if (kind == w83781d) {
+        /* Determine the chip type. */
+        val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID);
+        if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
                 client_name = "w83781d";
-        } else if (kind == w83782d) {
+        else if (val1 == 0x30 && vendid == winbond)
                 client_name = "w83782d";
-        } else if (kind == w83783s) {
+        else if (val1 == 0x40 && vendid == winbond && address == 0x2d)
                 client_name = "w83783s";
-        } else if (kind == as99127f) {
+        else if (val1 == 0x31)
                 client_name = "as99127f";
+        else
+                goto err_nodev;
+
+        if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) {
+                dev_dbg(&adapter->dev, "Device at 0x%02x appears to "
+                        "be the same as ISA device\n", address);
+                goto err_nodev;
         }
 
+        if (isa)
+                mutex_unlock(&isa->update_lock);
+
         strlcpy(info->type, client_name, I2C_NAME_SIZE);
 
         return 0;