ath5k: Reorder calibration calls during reset and update hw_set_power

 * Update ath5k_hw_reset and add some more documentation about PHY calibration
 * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep
 * Preserve sleep duration field while setting AR5K_SLEEP_CTL
   and reduce delays & checks for register's status (got this from
   decompiling & dumps, it works for me but it needs testing)

Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 59 insertions, 23 deletions

diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 3937e46e473..ad1a5b422c8 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -1092,34 +1092,57 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
         data = 0;
 
         /*
-         * Enable calibration and wait until completion
+         * Start automatic gain calibration
+         *
+         * During AGC calibration RX path is re-routed to
+         * a signal detector so we don't receive anything.
+         *
+         * This method is used to calibrate some static offsets
+         * used together with on-the fly I/Q calibration (the
+         * one performed via ath5k_hw_phy_calibrate), that doesn't
+         * interrupt rx path.
+         *
+         * If we are in a noisy environment AGC calibration may time
+         * out.
          */
         AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
                                 AR5K_PHY_AGCCTL_CAL);
 
+        /* At the same time start I/Q calibration for QAM constellation
+         * -no need for CCK- */
+        ah->ah_calibration = false;
+        if (!(mode == AR5K_MODE_11B)) {
+                ah->ah_calibration = true;
+                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+                                AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+                AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+                                AR5K_PHY_IQ_RUN);
+        }
+
+        /* Wait for gain calibration to finish (we check for I/Q calibration
+         * during ath5k_phy_calibrate) */
         if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
                         AR5K_PHY_AGCCTL_CAL, 0, false)) {
-                ATH5K_ERR(ah->ah_sc, "calibration timeout (%uMHz)\n",
+                ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
                         channel->center_freq);
                 return -EAGAIN;
         }
 
+        /*
+         * Start noise floor calibration
+         *
+         * If we run NF calibration before AGC, it always times out.
+         * Binary HAL starts NF and AGC calibration at the same time
+         * and only waits for AGC to finish. I believe that's wrong because
+         * during NF calibration, rx path is also routed to a detector, so if
+         * it doesn't finish we won't have RX.
+         *
+         * XXX: Find an interval that's OK for all cards...
+         */
         ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
         if (ret)
                 return ret;
 
-        ah->ah_calibration = false;
-
-        /* A and G modes can use QAM modulation which requires enabling
-         * I and Q calibration. Don't bother in B mode. */
-        if (!(mode == AR5K_MODE_11B)) {
-                ah->ah_calibration = true;
-                AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-                                AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-                AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-                                AR5K_PHY_IQ_RUN);
-        }
-
         /*
          * Reset queues and start beacon timers at the end of the reset routine
          */
@@ -1247,7 +1270,7 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
                 bool set_chip, u16 sleep_duration)
 {
         unsigned int i;
-        u32 staid;
+        u32 staid, data;
 
         ATH5K_TRACE(ah->ah_sc);
         staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
@@ -1259,7 +1282,8 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
         case AR5K_PM_NETWORK_SLEEP:
                 if (set_chip)
                         ath5k_hw_reg_write(ah,
-                                AR5K_SLEEP_CTL_SLE | sleep_duration,
+                                AR5K_SLEEP_CTL_SLE_ALLOW |
+                                sleep_duration,
                                 AR5K_SLEEP_CTL);
 
                 staid |= AR5K_STA_ID1_PWR_SV;
@@ -1274,13 +1298,24 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
                 break;
 
         case AR5K_PM_AWAKE:
+
+                staid &= ~AR5K_STA_ID1_PWR_SV;
+
                 if (!set_chip)
                         goto commit;
 
-                ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-                                AR5K_SLEEP_CTL);
+                /* Preserve sleep duration */
+                data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+                if( data & 0xffc00000 ){
+                        data = 0;
+                } else {
+                        data = data & 0xfffcffff;
+                }
+
+                ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+                udelay(15);
 
-                for (i = 5000; i > 0; i--) {
+                for (i = 50; i > 0; i--) {
                         /* Check if the chip did wake up */
                         if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
                                         AR5K_PCICFG_SPWR_DN) == 0)
@@ -1288,15 +1323,13 @@ int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
 
                         /* Wait a bit and retry */
                         udelay(200);
-                        ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_WAKE,
-                                AR5K_SLEEP_CTL);
+                        ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
                 }
 
                 /* Fail if the chip didn't wake up */
                 if (i <= 0)
                         return -EIO;
 
-                staid &= ~AR5K_STA_ID1_PWR_SV;
                 break;
 
         default:
@@ -1325,6 +1358,7 @@ void ath5k_hw_start_rx(struct ath5k_hw *ah)
 {
         ATH5K_TRACE(ah->ah_sc);
         ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+        ath5k_hw_reg_read(ah, AR5K_CR);
 }
 
 /*
@@ -1411,6 +1445,7 @@ int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
                 }
                 /* Start queue */
                 ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+                ath5k_hw_reg_read(ah, AR5K_CR);
         } else {
                 /* Return if queue is disabled */
                 if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
@@ -1708,6 +1743,7 @@ enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
          * (they will be re-enabled afterwards).
          */
         ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+        ath5k_hw_reg_read(ah, AR5K_IER);
 
         old_mask = ah->ah_imr;
 
@@ -3511,7 +3547,7 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
                         if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
                                 AR5K_REG_ENABLE_BITS(ah,
                                         AR5K_QUEUE_MISC(queue),
-                                        AR5K_QCU_MISC_TXE);
+                                        AR5K_QCU_MISC_RDY_VEOL_POLICY);
                 }
 
                 if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)