Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (62 commits)
  powerpc/85xx: Fix signedness bug in cache-sram
  powerpc/fsl: 85xx: document cache sram bindings
  powerpc/fsl: define binding for fsl mpic interrupt controllers
  powerpc/fsl_msi: Handle msi-available-ranges better
  drivers/serial/ucc_uart.c: Add of_node_put to avoid memory leak
  powerpc/85xx: Fix SPE float to integer conversion failure
  powerpc/85xx: Update sata controller compatible for p1022ds board
  ATA: Add FSL sata v2 controller support
  powerpc/mpc8xxx_gpio: simplify searching for 'fsl, qoriq-gpio' compatiable
  powerpc/8xx: remove obsolete mgsuvd board
  powerpc/82xx: rename and update mgcoge board support
  powerpc/83xx: rename and update kmeter1
  powerpc/85xx: Workaroudn e500 CPU erratum A005
  powerpc/fsl_pci: Add support for FSL PCIe controllers v2.x
  powerpc/85xx: Fix writing to spin table 'cpu-release-addr' on ppc64e
  powerpc/pseries: Disable MSI using new interface if possible
  powerpc: Enable GENERIC_HARDIRQS_NO_DEPRECATED.
  powerpc: core irq_data conversion.
  powerpc: sysdev/xilinx_intc irq_data conversion.
  powerpc: sysdev/uic irq_data conversion.
  ...

Fix up conflicts in arch/powerpc/sysdev/fsl_msi.c (due to getting rid of
of_platform_driver in arch/powerpc)

1 files changed, 8 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
index bcc30bac683..70558c3f368 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
@@ -5,14 +5,21 @@ Required properties:
   first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
   the parent type.
+
 - reg : should contain the address and the length of the shared message
   interrupt register set.
+
 - msi-available-ranges: use <start count> style section to define which
   msi interrupt can be used in the 256 msi interrupts. This property is
   optional, without this, all the 256 MSI interrupts can be used.
+  Each available range must begin and end on a multiple of 32 (i.e.
+  no splitting an individual MSI register or the associated PIC interrupt).
+
 - interrupts : each one of the interrupts here is one entry per 32 MSIs,
   and routed to the host interrupt controller. the interrupts should
-  be set as edge sensitive.
+  be set as edge sensitive.  If msi-available-ranges is present, only
+  the interrupts that correspond to available ranges shall be present.
+
 - interrupt-parent: the phandle for the interrupt controller
   that services interrupts for this device. for 83xx cpu, the interrupts
   are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed