Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6

8 files changed, 454 insertions, 19 deletions

diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 17a21a291e2..851f2458bf6 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -36,6 +36,14 @@ config MACH_PCM037
           Include support for Phytec pcm037 platform. This includes
           specific configurations for the board and its peripherals.
 
+config MACH_PCM037_EET
+        bool "Support pcm037 EET board extensions"
+        depends on MACH_PCM037
+        help
+          Add support for PCM037 EET baseboard extensions. If you are using the
+          OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
+          command-line parameter.
+
 config MACH_MX31LITE
         bool "Support MX31 LITEKIT (LogicPD)"
         select ARCH_MX31
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 0322696bd11..6b9775471be 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)    += mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)     += mx31lite.o
 obj-$(CONFIG_MACH_PCM037)       += pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)   += pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)     += mx31pdk.o
 obj-$(CONFIG_MACH_MX31MOBOARD)  += mx31moboard.o mx31moboard-devboard.o \
                                    mx31moboard-marxbot.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 541181090b3..ee331fd6b1b 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -31,6 +31,8 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -46,8 +48,10 @@
 #include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
+#include "crm_regs.h"
 
 static int armadillo5x0_pins[] = {
         /* UART1 */
@@ -93,7 +97,56 @@ static int armadillo5x0_pins[] = {
         MX31_PIN_FPSHIFT__FPSHIFT,
         MX31_PIN_DRDY0__DRDY0,
         IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+};
 
+/*
+ * NAND Flash
+ */
+static struct mxc_nand_platform_data armadillo5x0_nand_flash_pdata = {
+        .width          = 1,
+        .hw_ecc         = 1,
+};
+
+/*
+ * MTD NOR Flash
+ */
+static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
+        {
+                .name           = "nor.bootloader",
+                .offset         = 0x00000000,
+                .size           = 4*32*1024,
+        }, {
+                .name           = "nor.kernel",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 16*128*1024,
+        }, {
+                .name           = "nor.userland",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 110*128*1024,
+        }, {
+                .name           = "nor.config",
+                .offset         = MTDPART_OFS_APPEND,
+                .size           = 1*128*1024,
+        },
+};
+
+static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+        .width          = 2,
+        .parts          = armadillo5x0_nor_flash_partitions,
+        .nr_parts       = ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
+};
+
+static struct resource armadillo5x0_nor_flash_resource = {
+        .flags          = IORESOURCE_MEM,
+        .start          = CS0_BASE_ADDR,
+        .end            = CS0_BASE_ADDR + SZ_64M - 1,
+};
+
+static struct platform_device armadillo5x0_nor_flash = {
+        .name                   = "physmap-flash",
+        .id                     = -1,
+        .num_resources          = 1,
+        .resource               = &armadillo5x0_nor_flash_resource,
 };
 
 /*
@@ -272,6 +325,16 @@ static void __init armadillo5x0_init(void)
         /* Register FB */
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
+
+        /* Register NOR Flash */
+        mxc_register_device(&armadillo5x0_nor_flash,
+                            &armadillo5x0_nor_flash_pdata);
+
+        /* Register NAND Flash */
+        mxc_register_device(&mxc_nand_device, &armadillo5x0_nand_flash_pdata);
+
+        /* set NAND page size to 2k if not configured via boot mode pins */
+        __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c6f61a1f06c..840cfda341d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -18,7 +18,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/plat-ram.h>
@@ -33,29 +33,67 @@
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
 
-#include <mach/hardware.h>
+#include <media/soc_camera.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
+#include <mach/board-pcm037.h>
 #include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/board-pcm037.h>
+#include <mach/mmc.h>
+#include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-#ifdef CONFIG_I2C_IMX
-#include <mach/i2c.h>
-#endif
 
 #include "devices.h"
+#include "pcm037.h"
+
+static enum pcm037_board_variant pcm037_instance = PCM037_PCM970;
+
+static int __init pcm037_variant_setup(char *str)
+{
+        if (!strcmp("eet", str))
+                pcm037_instance = PCM037_EET;
+        else if (strcmp("pcm970", str))
+                pr_warning("Unknown pcm037 baseboard variant %s\n", str);
+
+        return 1;
+}
+
+/* Supported values: "pcm970" (default) and "eet" */
+__setup("pcm037_variant=", pcm037_variant_setup);
+
+enum pcm037_board_variant pcm037_variant(void)
+{
+        return pcm037_instance;
+}
+
+/* UART1 with RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_handshake_pins[] = {
+        MX31_PIN_CTS1__CTS1,
+        MX31_PIN_RTS1__RTS1,
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+};
+
+/* UART1 without RTS/CTS handshake signals */
+static unsigned int pcm037_uart1_pins[] = {
+        MX31_PIN_TXD1__TXD1,
+        MX31_PIN_RXD1__RXD1,
+};
 
 static unsigned int pcm037_pins[] = {
         /* I2C */
         MX31_PIN_CSPI2_MOSI__SCL,
         MX31_PIN_CSPI2_MISO__SDA,
+        MX31_PIN_CSPI2_SS2__I2C3_SDA,
+        MX31_PIN_CSPI2_SCLK__I2C3_SCL,
         /* SDHC1 */
         MX31_PIN_SD1_DATA3__SD1_DATA3,
         MX31_PIN_SD1_DATA2__SD1_DATA2,
@@ -73,11 +111,6 @@ static unsigned int pcm037_pins[] = {
         MX31_PIN_CSPI1_SS0__SS0,
         MX31_PIN_CSPI1_SS1__SS1,
         MX31_PIN_CSPI1_SS2__SS2,
-        /* UART1 */
-        MX31_PIN_CTS1__CTS1,
-        MX31_PIN_RTS1__RTS1,
-        MX31_PIN_TXD1__TXD1,
-        MX31_PIN_RXD1__RXD1,
         /* UART2 */
         MX31_PIN_TXD2__TXD2,
         MX31_PIN_RXD2__RXD2,
@@ -120,6 +153,22 @@ static unsigned int pcm037_pins[] = {
         MX31_PIN_D3_SPL__D3_SPL,
         MX31_PIN_D3_CLS__D3_CLS,
         MX31_PIN_LCS0__GPI03_23,
+        /* CSI */
+        IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO),
+        MX31_PIN_CSI_D6__CSI_D6,
+        MX31_PIN_CSI_D7__CSI_D7,
+        MX31_PIN_CSI_D8__CSI_D8,
+        MX31_PIN_CSI_D9__CSI_D9,
+        MX31_PIN_CSI_D10__CSI_D10,
+        MX31_PIN_CSI_D11__CSI_D11,
+        MX31_PIN_CSI_D12__CSI_D12,
+        MX31_PIN_CSI_D13__CSI_D13,
+        MX31_PIN_CSI_D14__CSI_D14,
+        MX31_PIN_CSI_D15__CSI_D15,
+        MX31_PIN_CSI_HSYNC__CSI_HSYNC,
+        MX31_PIN_CSI_MCLK__CSI_MCLK,
+        MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
+        MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
@@ -250,19 +299,43 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
         .hw_ecc = 1,
 };
 
-#ifdef CONFIG_I2C_IMX
 static struct imxi2c_platform_data pcm037_i2c_1_data = {
         .bitrate = 100000,
 };
 
+static struct imxi2c_platform_data pcm037_i2c_2_data = {
+        .bitrate = 20000,
+};
+
 static struct at24_platform_data board_eeprom = {
         .byte_len = 4096,
         .page_size = 32,
         .flags = AT24_FLAG_ADDR16,
 };
 
+static int pcm037_camera_power(struct device *dev, int on)
+{
+        /* disable or enable the camera in X7 or X8 PCM970 connector */
+        gpio_set_value(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), !on);
+        return 0;
+}
+
+static struct i2c_board_info pcm037_i2c_2_devices[] = {
+        {
+                I2C_BOARD_INFO("mt9t031", 0x5d),
+        },
+};
+
+static struct soc_camera_link iclink = {
+        .bus_id         = 0,            /* Must match with the camera ID */
+        .power          = pcm037_camera_power,
+        .board_info     = &pcm037_i2c_2_devices[0],
+        .i2c_adapter_id = 2,
+        .module_name    = "mt9t031",
+};
+
 static struct i2c_board_info pcm037_i2c_devices[] = {
-       {
+        {
                 I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
                 .platform_data = &board_eeprom,
         }, {
@@ -270,7 +343,14 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
                 .type = "pcf8563",
         }
 };
-#endif
+
+static struct platform_device pcm037_camera = {
+        .name   = "soc-camera-pdrv",
+        .id     = 0,
+        .dev    = {
+                .platform_data = &iclink,
+        },
+};
 
 /* Not connected by default */
 #ifdef PCM970_SDHC_RW_SWITCH
@@ -334,9 +414,41 @@ static struct imxmmc_platform_data sdhc_pdata = {
         .exit = pcm970_sdhc1_exit,
 };
 
+struct mx3_camera_pdata camera_pdata = {
+        .dma_dev        = &mx3_ipu.dev,
+        .flags          = MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+        .mclk_10khz     = 2000,
+};
+
+static int __init pcm037_camera_alloc_dma(const size_t buf_size)
+{
+        dma_addr_t dma_handle;
+        void *buf;
+        int dma;
+
+        if (buf_size < 2 * 1024 * 1024)
+                return -EINVAL;
+
+        buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+        if (!buf) {
+                pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+                return -ENOMEM;
+        }
+
+        memset(buf, 0, buf_size);
+
+        dma = dma_declare_coherent_memory(&mx3_camera.dev,
+                                        dma_handle, dma_handle, buf_size,
+                                        DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+        /* The way we call dma_declare_coherent_memory only a malloc can fail */
+        return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static struct platform_device *devices[] __initdata = {
         &pcm037_flash,
         &pcm037_sram_device,
+        &pcm037_camera,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -377,6 +489,22 @@ static const struct fb_videomode fb_modedb[] = {
                 .sync           = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
                 .vmode          = FB_VMODE_NONINTERLACED,
                 .flag           = 0,
+        }, {
+                /* 240x320 @ 60 Hz */
+                .name           = "CMEL-OLED",
+                .refresh        = 60,
+                .xres           = 240,
+                .yres           = 320,
+                .pixclock       = 185925,
+                .left_margin    = 9,
+                .right_margin   = 16,
+                .upper_margin   = 7,
+                .lower_margin   = 9,
+                .hsync_len      = 1,
+                .vsync_len      = 1,
+                .sync           = FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
+                .vmode          = FB_VMODE_NONINTERLACED,
+                .flag           = 0,
         },
 };
 
@@ -397,6 +525,14 @@ static void __init mxc_board_init(void)
         mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
                         "pcm037");
 
+        if (pcm037_variant() == PCM037_EET)
+                mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
+                        ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
+        else
+                mxc_iomux_setup_multiple_pins(pcm037_uart1_handshake_pins,
+                        ARRAY_SIZE(pcm037_uart1_handshake_pins),
+                        "pcm037_uart1");
+
         platform_add_devices(devices, ARRAY_SIZE(devices));
 
         mxc_register_device(&mxc_uart_device0, &uart_pdata);
@@ -415,18 +551,30 @@ static void __init mxc_board_init(void)
         }
 
 
-#ifdef CONFIG_I2C_IMX
+        /* I2C adapters and devices */
         i2c_register_board_info(1, pcm037_i2c_devices,
                         ARRAY_SIZE(pcm037_i2c_devices));
 
         mxc_register_device(&mxc_i2c_device1, &pcm037_i2c_1_data);
-#endif
+        mxc_register_device(&mxc_i2c_device2, &pcm037_i2c_2_data);
+
         mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
         mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
         mxc_register_device(&mx3_ipu, &mx3_ipu_data);
         mxc_register_device(&mx3_fb, &mx3fb_pdata);
         if (!gpio_usbotg_hs_activate())
                 mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
+        /* CSI */
+        /* Camera power: default - off */
+        ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), "mt9t031-power");
+        if (!ret)
+                gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
+        else
+                iclink.power = NULL;
+
+        if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
+                mxc_register_device(&mx3_camera, &camera_pdata);
 }
 
 static void __init pcm037_timer_init(void)
@@ -448,4 +596,3 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
         .init_machine   = mxc_board_init,
         .timer          = &pcm037_timer,
 MACHINE_END
-
diff --git a/arch/arm/mach-mx3/pcm037.h b/arch/arm/mach-mx3/pcm037.h
new file mode 100644
index 00000000000..d6929721a5f
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037.h
@@ -0,0 +1,11 @@
+#ifndef __PCM037_H__
+#define __PCM037_H__
+
+enum pcm037_board_variant {
+        PCM037_PCM970,
+        PCM037_EET,
+};
+
+extern enum pcm037_board_variant pcm037_variant(void);
+
+#endif
diff --git a/arch/arm/mach-mx3/pcm037_eet.c b/arch/arm/mach-mx3/pcm037_eet.c
new file mode 100644
index 00000000000..fe52fb1bb8b
--- /dev/null
+++ b/arch/arm/mach-mx3/pcm037_eet.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2009
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <mach/common.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/iomux-mx3.h>
+
+#include <asm/mach-types.h>
+
+#include "pcm037.h"
+#include "devices.h"
+
+static unsigned int pcm037_eet_pins[] = {
+        /* SPI #1 */
+        MX31_PIN_CSPI1_MISO__MISO,
+        MX31_PIN_CSPI1_MOSI__MOSI,
+        MX31_PIN_CSPI1_SCLK__SCLK,
+        MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+        MX31_PIN_CSPI1_SS0__SS0,
+        MX31_PIN_CSPI1_SS1__SS1,
+        MX31_PIN_CSPI1_SS2__SS2,
+
+        /* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
+        IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
+        /* GPIO keys */
+        IOMUX_MODE(MX31_PIN_GPIO1_0,    IOMUX_CONFIG_GPIO), /* 0 */
+        IOMUX_MODE(MX31_PIN_GPIO1_1,    IOMUX_CONFIG_GPIO), /* 1 */
+        IOMUX_MODE(MX31_PIN_GPIO1_2,    IOMUX_CONFIG_GPIO), /* 2 */
+        IOMUX_MODE(MX31_PIN_GPIO1_3,    IOMUX_CONFIG_GPIO), /* 3 */
+        IOMUX_MODE(MX31_PIN_SVEN0,      IOMUX_CONFIG_GPIO), /* 32 */
+        IOMUX_MODE(MX31_PIN_STX0,       IOMUX_CONFIG_GPIO), /* 33 */
+        IOMUX_MODE(MX31_PIN_SRX0,       IOMUX_CONFIG_GPIO), /* 34 */
+        IOMUX_MODE(MX31_PIN_SIMPD0,     IOMUX_CONFIG_GPIO), /* 35 */
+        IOMUX_MODE(MX31_PIN_RTS1,       IOMUX_CONFIG_GPIO), /* 38 */
+        IOMUX_MODE(MX31_PIN_CTS1,       IOMUX_CONFIG_GPIO), /* 39 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW4,   IOMUX_CONFIG_GPIO), /* 50 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW5,   IOMUX_CONFIG_GPIO), /* 51 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW6,   IOMUX_CONFIG_GPIO), /* 52 */
+        IOMUX_MODE(MX31_PIN_KEY_ROW7,   IOMUX_CONFIG_GPIO), /* 53 */
+
+        /* LEDs */
+        IOMUX_MODE(MX31_PIN_DTR_DTE1,   IOMUX_CONFIG_GPIO), /* 44 */
+        IOMUX_MODE(MX31_PIN_DSR_DTE1,   IOMUX_CONFIG_GPIO), /* 45 */
+        IOMUX_MODE(MX31_PIN_KEY_COL5,   IOMUX_CONFIG_GPIO), /* 55 */
+        IOMUX_MODE(MX31_PIN_KEY_COL6,   IOMUX_CONFIG_GPIO), /* 56 */
+};
+
+/* SPI */
+static struct spi_board_info pcm037_spi_dev[] = {
+        {
+                .modalias       = "dac124s085",
+                .max_speed_hz   = 400000,
+                .bus_num        = 0,
+                .chip_select    = 0,            /* Index in pcm037_spi1_cs[] */
+                .mode           = SPI_CPHA,
+        },
+};
+
+/* Platform Data for MXC CSPI */
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
+
+struct spi_imx_master pcm037_spi1_master = {
+        .chipselect = pcm037_spi1_cs,
+        .num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
+};
+#endif
+
+/* GPIO-keys input device */
+static struct gpio_keys_button pcm037_gpio_keys[] = {
+        {
+                .type   = EV_KEY,
+                .code   = KEY_L,
+                .gpio   = 0,
+                .desc   = "Wheel Manual",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_A,
+                .gpio   = 1,
+                .desc   = "Wheel AF",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_V,
+                .gpio   = 2,
+                .desc   = "Wheel View",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_M,
+                .gpio   = 3,
+                .desc   = "Wheel Menu",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_UP,
+                .gpio   = 32,
+                .desc   = "Nav Pad Up",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_RIGHT,
+                .gpio   = 33,
+                .desc   = "Nav Pad Right",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_DOWN,
+                .gpio   = 34,
+                .desc   = "Nav Pad Down",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_LEFT,
+                .gpio   = 35,
+                .desc   = "Nav Pad Left",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_ENTER,
+                .gpio   = 38,
+                .desc   = "Nav Pad Ok",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = KEY_O,
+                .gpio   = 39,
+                .desc   = "Wheel Off",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_FORWARD,
+                .gpio   = 50,
+                .desc   = "Focus Forward",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_BACK,
+                .gpio   = 51,
+                .desc   = "Focus Backward",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_MIDDLE,
+                .gpio   = 52,
+                .desc   = "Release Half",
+                .wakeup = 0,
+        }, {
+                .type   = EV_KEY,
+                .code   = BTN_EXTRA,
+                .gpio   = 53,
+                .desc   = "Release Full",
+                .wakeup = 0,
+        },
+};
+
+static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
+        .buttons        = pcm037_gpio_keys,
+        .nbuttons       = ARRAY_SIZE(pcm037_gpio_keys),
+        .rep            = 0, /* No auto-repeat */
+};
+
+static struct platform_device pcm037_gpio_keys_device = {
+        .name   = "gpio-keys",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &pcm037_gpio_keys_platform_data,
+        },
+};
+
+static int eet_init_devices(void)
+{
+        if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
+                return 0;
+
+        mxc_iomux_setup_multiple_pins(pcm037_eet_pins,
+                                ARRAY_SIZE(pcm037_eet_pins), "pcm037_eet");
+
+        /* SPI */
+        spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+        mxc_register_device(&mxc_spi_device0, &pcm037_spi1_master);
+#endif
+
+        platform_device_register(&pcm037_gpio_keys_device);
+
+        return 0;
+}
+
+late_initcall(eet_init_devices);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 27f8d1b2bc6..2eb182f7387 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -602,6 +602,8 @@ enum iomux_pins {
 #define MX31_PIN_I2C_DAT__SDA           IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_DCD_DTE1__I2C2_SDA     IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_RI_DTE1__I2C2_SCL      IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSPI2_SS2__I2C3_SDA    IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI2_SCLK__I2C3_SCL   IOMUX_MODE(MX31_PIN_CSPI2_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSI_D4__CSI_D4         IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D5__CSI_D5         IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSI_D6__CSI_D6         IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)